共查询到20条相似文献,搜索用时 62 毫秒
1.
The seismic ground rotations are important with respect to spatial structural models, which are sensitive to the wave propagation. The rotational ground motion can lead to significant increasing of structural response, instability and unusual damages of buildings. Currently, the seismic analyses often take into account the rocking and torsion motions separately using artificial accelerograms. We present an exact analytical method, proposed by Nazarov [15] for computing of three rotational accelerograms simultaneously from given translational records. The method is based on spectral representation in the form of Fourier amplitude spectra of seismic waves, corresponding to the given three-component translational accelerogram. The composition, directions and properties of seismic waves are previously determined in the form of a generalized wave model of ground motion. It is supposed that seismic ground motion can be composed by superposition of P, SV, SH- and surface waves. As an example, the dynamic response analysis of 25-story building is presented. Here recorded (low-frequency) and artificial (high-frequency) accelerograms were used; each of them includes three translational and three rotational components. In this structural analysis, we have clarified primarily conditions under which rotational ground motion should be taken into account. Next, we have calculated three rotational components of seismic ground motion. Then they were taken as additional seismic loads components for further seismic analysis of the building. Note, soil–structure interaction (SSI) is not considered in this study. For computing, we use the special software for structural analyses and accelerogram processing (FEA Software STARK ES and Odyssey software, Eurosoft Co., Russia). It was developed and is used in engineering practice in the Central Research Institute of Building Constructions (TsNIISK, Moscow, Russia). 相似文献
2.
3.
Best estimate seismic analysis are generally based on time‐domain simulations of structural responses. The seismic load is then modeled by a stochastic process representing ground motion. For this purpose, the analyst can use recorded accelerograms or work with synthetically generated ones. The number of ground motion time‐histories available for a given scenario and site condition is limited and generally not sufficient for carrying out more advanced probabilistic structural response analysis. It is then necessary to have at our disposal methods that allow for generating synthetic accelerograms that realistically characterize earthquake ground motions. However, most of the methods proposed in literature for generating synthetic accelerograms do not accurately reproduce the natural variability of ground motion parameters (such as PGA, cumulative absolute velocity, and Arias intensity) observed for recorded time histories. In this paper, we introduce a new method for generating synthetic ground motion, based on Karhunen‐Loève decomposition and a non‐Gaussian stochastic model. The proposed method enables the structural analyst to simulate ground motion time histories featuring the properties mentioned above. To demonstrate its capability, we study the influence of the simulation method on different ground motion parameters and on soil response spectra. We finally compute fragility curves to illustrate the practical application of the proposed method. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
This paper presents the development of a seismological model for the Tehran area. This modelling approach, which was originally developed in Eastern North America, has been used successfully in other parts of the world including Australia and China for simulating accelerograms and elastic response spectra. Parameters required for input into the model were inferred from seismological and geological information obtained locally. The attenuation properties of the earth crust were derived from the analysis of accelerogram records that had been collated from within the region in a previous study. In modelling local modifications of seismic waves in the upper crust, shear-wave velocity profiles have been constructed in accordance with the power law. Information inferred from micro-zonation studies (for near-surface conditions) and from measurements of teleseismic P-waves reflected from the deeper crusts as reported in the literature has been used to constrain parameters in the power-law relationships. This method of obtaining amplification factors for the upper crust distinguishes this study from earlier studies in the Tehran area (in which site amplification factors were inferred from the H/V ratio of the recorded ground motions). The regional specific seismological model so constructed from the study enabled accelerograms to be simulated and elastic response spectra calculated for a series of magnitude–distance combinations. Importantly, elastic response spectra calculated from the simulated accelerograms have been compared with those calculated from accelerograms recorded from earthquakes with magnitudes ranging between M6.3 and M7.4. The peak ground velocity values calculated from the simulated accelerograms have also been correlated with values inferred from macro-seismic intensity data of 17 historical earthquakes with magnitudes varying between 5.4 and 7.7 and with distances varying between 40 and 230 km. This paper forms part of the long-term strategy of the authors of applying modern techniques for modelling the attenuation behaviour of earthquakes in countries which are lacking in instrumental data of earthquakes. 相似文献
5.
The authors apply soil response estimation techniques employing accelerograms for fifteen earthquakes recorded at the Yokohama Strong Motion Network and its vertical array of nine sites, plus microtremor data recorded at all 150 sites. Assessment of the reliability of surface to reference site spectral ratios, and horizontal to vertical spectral ratios of S‐waves, coda, and microtremors, relied on cross‐validation with both surface to borehole spectral ratios, and theoretical soil response functions for vertically incident SH plane waves calculated from the vertical array recordings and logging data, respectively. The results indicate the following: (1) the reference site method provides more accurate soil response estimations; (2) the H/V of microtremors provides relatively better soil response estimations than its S‐wave and coda counterparts; and (3) the H/V of microtremors provides coincident soil response estimations at two‐thirds of the sites when considering no more than ±30% mismatch in the determination of the predominant periods. The matching of parameters obtained from the analysis of microtremors, combined with their relatively low economic cost and the possibility of recording without strict spatial or time restrictions turns microtremors into a particularly appealing approach. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
6.
An identification procedure of soil profile characteristics from two free field acclerometer records 总被引:2,自引:0,他引:2
In this paper, an analytical, numerical and experimental approach for identifying soil profile characteristics by using system identification and free field records, is presented. First, a theoretical soil amplification function for two sites is defined and expressed in terms of the different parameters of the layers constituting the soil profiles (thickness, damping ratio, shear wave velocity and unit weight). Then, this function is smoothed with an analogous function obtained from experimental data by using the least squares minimization technique. The identification of the parameters is performed by solving, numerically, a non-linear optimisation problem. To demonstrate the numerical efficiency and the validity of this approach, two examples are treated. The first one consists in the identification of characteristics of a given uniform soil layer. The second example consists in the experimental validation of this approach with the data recorded within the Garner Valley Down Hole Array (GVDA). Finally, this approach is applied to identify, simultaneously, soil profile characteristics of sites from only a single soil acceleration record at free surface of each site. This procedure is utilised to identify soil profile characteristics of sites by using strong ground motions data recorded during the recent Boumerdes earthquake of May 21, 2003. 相似文献
7.
8.
Bruce Westermo 《地震工程与结构动力学》1992,21(9):743-756
The paper discusses the synthesis of acceleration time histories primarily for use in structural response estimation. A proposed model for the acceleration time history is based on the summation of dispersive wave modes over the range of frequencies of typical interest to structural response. The values of the modal amplitudes and the travel times (or group velocities) are, for cases examined here, extracted from a target earthquake (or an ensemble of them). The synthetic accelerograms are constructed from these parameters with the inclusion of a probabilistic definition of those or other characteristics of the strong ground shaking and, in particular, the modal phase angle. The probability distributions of the peak acceleration and the integral of the square acceleration of the synthetic records are examined along with comparisons of the pseudo spectral velocity (PSV) response. 相似文献
9.
本文用数值积分法,对RDZ1-12-66型自动触发电流计记录式强震仪的幅频响应失真进行校正。并采用高通数字滤波的方法,修正加速度图的零线.为此编制了计算机程序,绘制了修正后的加速度、速度和位移时程曲线.计算了修正前后加速度图的傅氏谱。同时,对这些结果加以讨论。 修正后的加速度图,精确地表示了仪器基本频带在0.09HZ和25HZ之间的绝对地面加速度。 相似文献
10.
A method for generating a suite of synthetic ground motion time‐histories for specified earthquake and site characteristics defining a design scenario is presented. The method employs a parameterized stochastic model that is based on a modulated, filtered white‐noise process. The model parameters characterize the evolving intensity, predominant frequency, and bandwidth of the acceleration time‐history, and can be identified by matching the statistics of the model to the statistics of a target‐recorded accelerogram. Sample ‘observations’ of the parameters are obtained by fitting the model to a subset of the NGA database for far‐field strong ground motion records on firm ground. Using this sample, predictive equations are developed for the model parameters in terms of the faulting mechanism, earthquake magnitude, source‐to‐site distance, and the site shear‐wave velocity. For any specified set of these earthquake and site characteristics, sets of the model parameters are generated, which are in turn used in the stochastic model to generate the ensemble of synthetic ground motions. The resulting synthetic acceleration as well as corresponding velocity and displacement time‐histories capture the main features of real earthquake ground motions, including the intensity, duration, spectral content, and peak values. Furthermore, the statistics of their resulting elastic response spectra closely agree with both the median and the variability of response spectra of recorded ground motions, as reflected in the existing prediction equations based on the NGA database. The proposed method can be used in seismic design and analysis in conjunction with or instead of recorded ground motions. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
11.
This article points out some particular features conditioning seismic hazard assessments (SHA) in Spain, a region with low–moderate
seismicity. Although sized earthquakes occurred in the past, as evidenced by historical documents and neotectonic studies,
no large events occurred during the last decades. The absence of strong motion records corresponding to earthquakes with magnitude
larger than 5.5 is an important obstacle for the development of ground motion models constrained by local data, with the consequent
difficulty in SHA studies. In this paper, some recent developments aiming at providing solutions to these difficulties are
presented. Specifically, a strong motion databank containing a massive collection of accelerograms and response spectra from
different configurations source-path-site corresponding to earthquakes all over the world is introduced, together with software
utilities for its management. A first application of this databank is the development of specific ground motion models for
Spain and for the Mediterranean region that predict peak ground accelerations as a function of several definitions of magnitude,
distance and soil class. The predictive power of these ground motion models is tested by contrasting their estimates with
recently recorded ground motions. The comparison between our ground-motion models with others proposed in the literature for
other areas reveals a regular overestimation of the expected ground motions at Spanish sites by the non-local models. Consequently,
SHA studies based in external models may overestimate the predicted hazard at the Iberian sites. In the last part of the paper
a method for checking whether the response spectra proposed in the Spanish Building Code (NCSE-02) are consistent with actual
accelerometric data from recent low magnitude earthquakes is applied. The spectral shapes of the Spanish Building Code NCSE-02
are compared with the response spectral shapes deduced from the available accelerograms by normalising the response spectra
with the recorded PGA. It is appreciated that the NCSE-02 spectral shapes are exceeded by a large number of actual spectral
shapes for short periods (around 0.2 s), a result to be taken into account in further revisions of the NCSE-02 code. The issues
tackled in this work constitute not only an improvement for ground-motion characterisation in Spain, but also provide guidelines
of general interest for potential applications in other regions with similar seismicity. 相似文献
12.
A criterion is developed for the simulation of realistic artificial ground motion histories at soft‐soil sites, corresponding to a detailed ground motion record at a reference firm‐ground site. A complex transfer function is defined as the Fourier transform of the ground acceleration time history at the soft‐soil site divided by the Fourier transform of the acceleration record at the firm‐ground site. Working with both the real and the imaginary components of the transfer function, and not only with its modulus, serves to keep the statistical information about the wave phases (and, therefore, about the time variation of amplitudes and frequencies) in the algorithm used to generate the artificial records. Samples of these transfer functions, associated with a given pair of soft‐soil and firm‐ground sites, are empirically determined from the corresponding pairs of simultaneous records. Each function included in a sample is represented as the superposition of the transfer functions of the responses of a number of oscillators. This formulation is intended to account for the contributions of trains of waves following different patterns in the vicinity of both sites. The properties of the oscillators play the role of parameters of the transfer functions. They vary from one seismic event to another. Part of the variation is systematic, and can be explained in terms of the influence of ground motion intensity on the effective values of stiffness and damping of the artificial oscillators. Another part has random nature; it reflects the random characteristics of the wave propagation patterns associated with the different events. The semi‐empirical model proposed recognizes both types of variation. The influence of intensity is estimated by means of a conventional one‐dimensional shear wave propagation model. This model is used to derive an intensity‐dependent modification of the values of the empirically determined model parameters in those cases when the firm‐ground earthquake intensity used to determine these parameters differs from that corresponding to the seismic event for which the simulated records are to be obtained. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
13.
Non-uniform ground motions are generated based on a single record available at a site and seismic wave scattering analysis. The Chino Hills 2008 earthquake records at the Pacoima Dam site are used to indicate the accuracy of the method. Dynamic analysis of the Pacoima dam-reservoir-foundation under uniform and non-uniform ground motions is carried out using the EACD-3D2008 software, and the results are compared to recorded responses at different locations on the dam. There is good agreement between computed and recorded displacements of the dam for non-uniform excitation. For uniform excitation, the displacements are underestimated in comparison with those obtained from recorded excitation. Significant intensification of stresses, especially near the foundation, and different patterns of stress distribution are observed for non-uniform excitation in comparison with uniform excitation. For uniform excitation maximum stresses occur in the crown cantilever near the crest, but for non-uniform excitation the maximum stresses occur along the sides and near the foundation. 相似文献
14.
APPLICATION AND STATISTICAL ANALYSIS OF RELATIONSHIP BETWEEN SHEAR WAVE VELOCITY AND DEPTH OF SOIL-LAYERS
下载免费PDF全文
![点击此处可从《地震地质》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The shear wave velocity is one of the important parameters in seismic engineering.The common mathematical models of relationship between shear wave velocity and depth of soil-layers are linear function model,quadratic function model,power function model,cubic function model,and quartic function model.It is generally believed that the regression formulae based on aforementioned mathematical models are mainly used for preliminary estimation of the local shear wave velocity.In order to increase the value of test data of wave speed in boreholes,the calculation formulae for the thickness of ground cover layer are derived based on the aforementioned mathematical models and their fitting parameters.The calculation formulae for the mean shear wave velocity of soil-layers are derived by integral mean value theorem.Accordingly,the calculation formulae for the equivalent shear wave velocity of soil-layers are derived.The calculation formulae for the depth of reflective waves in time-depth conversion of the reflection seismic exploration are derived.Through the statistical analysis of test data of shear wave velocity of soil layers in Changyuan County,Henan Province,regression formulae and their fitting parameters of aforementioned mathematical models are obtained.The results show that in the determination of the quality of these regression formulae and their fitting parameters,the adjusted R-square,root mean square error and residual error,the matching on the statistical range between the geometry of function of mathematical models used and the scattergram of the measured data,the application purpose and the simplicity of the regression formulae should be considered.With the aforementioned new formulae,the results show that the calculated values of equivalent shear wave velocity of soil-layers and thickness of ground cover layer meet the engineering needs.The steps for statistics and applications of the relationship between shear wave velocity and depth of soil-layers for a new area are as follows:(1) Analyze the relevant data about the site such as the drilling and wave speed test data,etc.and divide the site into seismic engineering geological units;(2) In a single seismic engineering geological unit,make statistical analysis of the data of borehole wave speed test,comprehensively identify and select mathematical models and their fitting parameters of the relationship between shear wave velocity and depth of soil-layers;(3) Substitute the selected fitting parameters into the formulae,based on their mathematical models for the thickness of ground cover layer,or the equivalent shear wave velocity of soil-layers,or the depth of reflective wave,then the thickness of ground covering layer,equivalent shear wave velocity,and depth of reflective wave are obtained. 相似文献
15.
An investigation on the ground motion parameters and seismic response of underground structures
下载免费PDF全文
![点击此处可从《地震科学(英文版)》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Peak ground acceleration (PGA), frequency content and time duration are three fundamental parameters of seismic loading. This study focuses on the seismic load frequency and its effect on the underground structures. Eight accelerograms regarding different occurred earthquakes that are scaled to an identical PGA and variation of ground motion parameters with ratio of peak ground velocity (PGV) to PGA, as a parameter related to the load frequency, are considered. Then, concrete lining response of a circular tunnel under various seismic conditions is evaluated analytically. In the next, seismic response of underground structure is assessed numerically using two different time histories. Finally, effects of incident load frequency and frequency ratio on the dynamic damping of geotechnical materials are discussed. Result of analyses show that specific energy of seismic loading with identical PGA is related to the seismic load frequency. Furthermore, incident load frequency and natural frequency of a system have influence on the wave attenuation and dynamic damping of the system. 相似文献
16.
场地地震安全性评价中确定设计地震动参数方面若干问题的研究 总被引:5,自引:0,他引:5
研究了确定设计地震动参数中涉及的若干问题,其中包括基岩水平加速度反应谱衰减关系的选择、震源深度对基岩水平加速度峰值及基岩反应谱曲线的影响、强度包络线函数及输入随机相位的选择、土体非线性特性参数和土层剪切波速值的选择、设计地震动反应谱的标定等问题。在有关方面的研究中基于一个典型场地计算剖面,采用一维等效线性化模型并通过逐项变换某些研究参数的方法,研究了有关方面对设计地震动参数可能产生的影响及存在的误差和相应的规律,有关研究结果对合理确定设计地震动参数具有一定的实用价值。 相似文献
17.
时变功率谱模型参数衰减规律研究 总被引:1,自引:0,他引:1
基于美国西部基岩强震加速度记录资料,采用多重滤波技术计算水平向和竖向地震加速度记录时程的时变功率谱值,并利用非线性最小二乘法拟合了对应于各条加速度记录时程的时变功率谱模型参数值.采用经验统计方法,分析了水平向和竖向加速度时变功率谱模型参数随震级、震中距及频率的变化规律,建立其衰减模型,并由多随机变量一致加权最小二乘法拟合得到了各衰减模型的系数值.通过与现有时变功率谱衰减规律的对比分析,证明了本文提出的衰减模型的合理性. 相似文献
18.
One of the severe problems in the semi-empirical method for the prediction of strong ground motions is that there is no objective criterion for choosing empirical Green's functions. It is undesirable that synthesized strong ground motions are affected by the source process of an earthquake whose record is adopted as an empirical Green's function. Through the analysis of strong motion accelerograms of two aftershocks of the 1983 Japan Sea earthquakes, it is found that characteristics of the accelerograms are dependent on the moment rate function derived from teleseismic observations. A procedure is presented for removing the effect of the source process from observed strong motion accelerograms. The thus obtained empirical Green's function expresses approximately the impulse response of the medium between the earthquake source and the observation site. 相似文献
19.
Soil amplification characteristics are investigated using data from the Chibaken‐Toho‐Oki earthquake and its aftershocks recorded at Chiba dense array in Japan. The frequency‐dependent amplification function of soil is calculated using uphole‐to‐downhole spectral ratio analysis, considering the horizontal components of shear wave. The identified spectral ratios consistently demonstrate the splitting of peaks in their resonance frequencies and low amplification values in comparison with a 1D model. The torsional behaviour and horizontal ground motion coupling are clarified as the reasons for these phenomena at the site. To prove the hypothesis, the torsional motion is directly evaluated using the data of the horizontal dense array in different depths at the site. The comparison between Fourier spectra of torsional motion and identified transfer functions reveals the peaks at the same frequencies. The wave equation including torsion and horizontal motion coupling is introduced and solved for the layered media by applying wave propagation theory. Using the developed model, the effects of torsional motion with horizontal motion coupling on soil transfer function are numerically examined. Splitting and low amplification at resonance frequencies are confirmed by the results of numerical analysis. Furthermore, the ground motion in two horizontal directions at the site is simulated using site geotechnical specification and optimizing the model parameters. The simulated and recorded motions demonstrate good agreement that is used to validate the hypothesis. In addition, the spectral density of torsional ground motions are compared with the calculated one and found to be well predicted by the model. Finally, the results are used to explain the overestimation of damping in back‐calculation of dynamic soil properties using vertical array data in small strain level. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
20.
基于欧美规范确定了坐落在深厚覆盖层上KH抽水蓄能电站上、下库场地基本运行和最大设计地震动峰值加速度、反应谱和时程等动参数。首先依据场地区域地震烈度区划图、特征周期区划图和依据场地地质地震条件选取的5条种子实测地震动确定场地基岩输入加速度时程、峰值加速度和设计反应谱,进而基于各土层地质参数和一维弹性波传播模拟程序确定覆盖层表面的平均峰值加速度、平均反应谱和5条地震动时程,对所得到的平均反应谱和峰值加速度进行光滑处理后确定可用于各建筑物结构抗震设计的地震动参数,包括覆盖层表面水平向动力响应加速度时程、峰值加速度和设计反应谱。该方法可较好地保留输入地震动的真实动力特性,如持时、相位和频率等,为我国规范中建议的确定场地地震动参数的方法提供有益的补充。 相似文献