Stratigraphy and palaeoclimatic significance of Late Quaternary loess–palaeosol sequences of the Last Interglacial–Glacial cycle in central Alaska

Loess is one of the most widespread subaerial deposits in Alaska and adjacent Yukon Territory and may have a history that goes back 3 Ma. Based on mineralogy and major and trace element chemistry, central Alaskan loess has a composition that is distinctive from other loess bodies of the world, although it is quartz-dominated. Central Alaskan loess was probably derived from a variety of rock types, including granites, metabasalts and schists. Detailed stratigraphic data and pedologic criteria indicate that, contrary to early studies, many palaeosols are present in central Alaskan loess sections. The buried soils indicate that loess sedimentation was episodic, or at least rates of deposition decreased to the point where pedogenesis could keep ahead of aeolian input. As in China, loess deposition and pedogenesis are likely competing processes and neither stops completely during either phase of the loess/soil formation cycle. Loess deposition in central Alaska took place before, and probably during the last interglacial period, during stadials of the mid-Wisconsin period, during the last glacial period and during the Holocene. An unexpected result of our geochronological studies is that only moderate loess deposition took place during the last glacial period. Our studies lead us to conclude that vegetation plays a key role in loess accumulation in Alaska. Factors favouring loess production are enhanced during glacial periods but factors that favour loess accumulation are diminished during glacial periods. The most important of these is vegetation; boreal forest serves as an effective loess trap, but sparsely distributed herb tundra does not. Thus, thick accumulations of loess should not be expected where tundra vegetation was dominant and this is borne out by modern studies near the treeline in central Alaska. Much of the stratigraphic diversity of North American loess, including that found in the Central Lowlands, the Great Plains, and Alaska is explained by a new model that emphasizes the relative importance of loess production factors versus loess accumulation factors.     

Characteristics and genesis of hematite in Chinese loess and paleosol sequences： Mineral genetic restriction for magnetic susceptibility as paleoclimate proxy and iron geochemistry

Hematite is an important iron oxide mineral in loess-paleosol sequences in central China. Investigation of the mineralogical characteristics, genetic mechanism and relationship of hematite with other iron oxides and Fe-bearing minerals will help understand the geochemical process before and after eolian deposit, paleocliamte significance of magnetic susceptibility and reconstruct paleoclimate in central China. So, hematite and related minerals of the loess and paleosol units from Chinese Loess Plateau were investigated using optical microscope, X-ray powder diffraction （XRD）, scanning electron microscopy （SEM）, and high-resolution transmission microscopy （HRTEM）. The results show that there are five genetic types of hematite in loess-paleosol sequences of central China： （1） weathering of Fe-bearing silicate minerals, for instance, chlorite, will release iron that is precipitated as aggregates of hematite nano-crystals on mineral surfaces; （2） hematite combined with eolian magnetite grains that resulted from partial oxidation of magnetite, even though the partial oxidation may occur in the original area; （3） phase transformation from eolian goethite to hematite; （4） hematite formed on the edge and surface of maghemite because of dissolution and hematite recrystallization; and （5） eolian detrial hematite. The hematite formed from chemical weathering of Fe-bearing silicates with nanoporous texture because of dehydration from iron hydroxide is the most important genetic mechanism. It is proposed that the fact that hematite was formed from chemical weathering of Fe-bearing silicates is a main reason for the redness in paleosol units. However, too intense pedogenesis and high amounts of precipitation will promote oxidation of eolian magnetite and maghemite dissolution, which may result in the decreasing of magnetic susceptibility.     

The last 750 ka in loess–palaeosol sequences from northern France: environmental background and dating of the western European Palaeolithic

This study presents an overview of Middle Pleistocene loess–palaeosol sequences (LPS) in northern France and discusses the palaeoclimatic significance of the pedosedimentary record in the context of western European LPS and of global climatic cycles for the last 750 ka. In this area, the oldest loess deposits (early Middle Pleistocene) are preserved in sedimentary traps (leeward scarps of fluvial terraces and dissolution sinkholes). They result from local deflation processes reworking Pleistocene sandy fluvial deposits or relicts of Tertiary sands. A large extension of typical calcareous loess over the landscape, the Loess Revolution, is then observed during MIS 6, with heavy mineral assemblages testifying to long-distance transport from the polar desert area of the dried eastern Channel. A correlation scheme is proposed between the global records of northern France in continental environments and both global palaeoclimatic records and other main western European LPS. After 30 years of research, northern France LPS stand as a fundamental archive of the impact of interglacial–glacial climatic cycles as well as millennial events. Finally, these works provide a robust chronoclimatic framework for the study of the western European Late Acheulean and Middle Palaeolithic and for the relative dating of the various fluvial terraces that they fossilise.     

Geochemical characteristics of Dongsheng sandstone-type uranium deposit, Ordos Basin

Generally, sandstone-type uranium deposits can be divided into three zones according to their redox conditions: oxidized zone, ore zone and reduced zone. The Dongsheng uranium deposit belongs to this type. In order to study its geochemical characteristics, 11 samples were taken from the three zones of the Dongsheng uranium deposit. Five samples of them were collected from the oxidized zone, four samples from the ore zone and two samples from the reduced zone. These samples were analyzed using organic and inorganic geochemical methods. The results of GC traces and ICP-MASS indicate that the three zones show different organic and inorganic geochemical characteristics.     

Compositional characteristics and geochemical significance of light hydrocarbons for crude oils in Tarim Basin, China

Light hydrocarbons, especially C7 isoalkanes, cyclopentanes, cyclohexanes and n-heptane in 540 oils from the Tarim Basin were studied systematically. The results suggested the K1 values [ （2-MH＋ 2,3-DMP）/（3-MH ＋ 2,4-DMP） ] of crude oils vary from a lowest value of 0.78, to a highest value of 1.54, but the K1 values of the majority of oil samples （80%） range from 0.90 to 1.20. However, the absolute contents of （ 2-methylhexane ＋ 2,3-dimethylpentane） and （ 3-methylhexane ＋ 2,4-dimethylpentane） in the total light hydrocarbons （ C4-C7 ） show a similar variation trend. The variation of K1 values of crude oils can suggest a typical sedimentary environment for source rocks. Therefore, according to the compositional characteristics of C7 light hydrocarbons in light of the steady-state catalytic hypothesis, nonmarine oils from the Yingmaili area and marine oils from the Tazhong uplift in the Tarim Basin were genetically classified.     

Geochemical characteristics of selected elements in iron–manganese cutans and matrices of Alfisols in central China

The elemental geochemistry of major, minor and trace elements in iron–manganese cutans and the corresponding matrix soils, collected from three Alfisols in central China, are studied using their chemical compositions as well as correlation and factor analyses. Fe–Mn cutans accumulate high concentrations of MnO₂ and Fe₂O₃. Mean values of these two elements in cutans are about 13.7 and 1.4 times higher than those in the matrix soils. pH, clay contents, extractable X-ray noncrystalline Fe (Feo) and the ratio of Feo to free Fe-oxide (Fed) in cutans are notably higher than those in the corresponding matrices. Cutans are also enriched in some bases and heavy metals. Averages of K, Na, Co and Pb concentrations are about 2.0, 1.4, 15.4 and 6.0 times higher than those in the matrices. Statistical analysis indicates that Co, Ni, Li, Cu and Zn are abundant in Mn minerals of cutans, while Pb exists mainly in iron minerals. Fe–Mn cutans constitute an active microzone of solid–solution–plant–air interaction, element movement and exchange in soils, which cause the contents of Fe- and Mn-oxides, elemental concentrations, and geochemical behavior of cutan to show marked differences in matrix soils.     

Geochemical time series from lake sediments of the Central Asia as chronologic evidence of environmental change over the Late Holocene

Lake sediments provide archives of various parameters correlative with climatic oscillations such as seasonal temperature and humidity. However, geochemical records from many European and Asian lakes cannot be directly correlated with meteorological data within densely populated areas, because of anthropogenic pollution there. The human impact has greatly increased within the instrumental period of the last 150-200 years. However, the pollution problem is not essential for the mountain lakes of Siberia and Mongolia remote from industrial and agricultural centers. For such lakes a correlation between sedimentological-geochemical （inorganic） parameters and climatic data is correct enough. It is able to estimate any type of transfer functions for quantification of that dependence.     

Characteristics of trace elements in contaminated rivers and their environmental significance

Several rivers researched around Taihu Lake in Chinese eastern plain are distributed to the west of the lake. Pollutants of different types from tributaries and inlets flow directly into the main rivers and finally into the lake. They change trace elements of rivers fi＇om which we can analyze. Researches about trace elements are helpful for understanding the pollutant characteristics, industrial structure and agricultural cultivation in the area of network rivers in the plain of China. Samples of water column, suspended matter and sediment were collected fi＇om the west rivers of Taihu Lake, which represent three typical rivers. Observation in the field and the primary composition analysis showed the Caoqiao River was mainly contaminated by industrial wastewater, the Liangxi River was discharged by domestic sewage and the Dapu River was principally input by farmland runoff. REE concentrations and their normalized curves showed obvious characters for rivers discharged by different sewages. The contents of total REE in water column followed the order of the Caoqiao River, the Dapu River and the Liangxi River fi＇om high to low. TREEs in suspended matter and sediments follow the order of the Dapu River 〉 the Caoqiao River 〉 the Liangxi River. REE normalized curves （for Australia shale） suggested that significant diversities were presented in water column, suspended matter and sediments, i.e., heavy REE enrichment in water, middle REE enrichment in suspended matter, and smooth curves for sediments. But the heavy pollution resulted in several anomalous curves in the same rivers. Some element ratios were selected as indices for polluted rivers based on their geochemical properties and diversities between rivers. The results displayed the discriminative indices for water column, suspended matter and sediment. The effective indices were Pb/Fe, Cr/Fe, Ni/Fe, Pb/Ni, Zn/Ni for water column, Cu/Al, Cu/Fe, Zn/Fe, K/Ca, K/Na, Pb/Co, Zn/Co for suspend matter and Pb/Fe, K/Ca, Ca/Mg, Zn/Ni for sediment, respectively. In general, rivers mainly discharged by industrial sewage have high ratios of Pb/Ni, K/Ca, are enriched in the middle REE and have positive Gd anomaly. The domestic sewage flowing into rivers reveals high ratios of Zn/Ni, Pb/Fe, and is enriched in the heavy REE, and has the positive Eu anomaly. If runoff of farmland enters into the rivers, it will have high ratios of Ca/Mg, K/Na, high lanthanum, and show the smooth normalized curves of REE.     

The Požarevac loess–paleosol sequence: a record of increased aridity in the south-eastern margin of the Carpathian Basin during the last 350 ka

The loess sequence preserved in the Požarevac brickyard in north-eastern Serbia comprises eight loess units separated by seven paleosols. Geochronological investigation using amino acid racemization and luminescence dating support stratigraphic correlations of loess units L3, S2LL1 and L1 at the Požarevac section with loess of glacial cycles E [Marine Isotope Stage (MIS) 10], D (MIS 9–8), C (MIS 7–6) and B (MIS 5–2) across central Europe. Correlation with the marine oxygen-isotope stratigraphy and associated paleoclimatic inferences are further supported by magnetic susceptibility, particle size and carbonate content measured in Požarevac sediments. Malacological investigations at the Požarevac section reveal the continuous presence of the Chondrula tridens and Helicopsis striata faunal assemblages throughout the last 350 ka. The loess malacological fauna, which is characterized by the complete absence of cold-resistant and cold-preferring species, suggests a stable, dry and relatively warm glacial and interglacial climate, compared with other central European loess localities. Together these data suggest that the south-eastern part of the Carpathian (Pannonian, Middle Danube) Basin was a refugium for warm-preferring and xerophilous land-snails during the generally unfavorable glacial climates of the late Middle and Late Pleistocene.     

Hissar–Alai and the Pamirs: Junction and Position in the System of Mobile Belts of Central Asia

The position of the Pamirs and the Hissar–Alai mountainous system in the structure of Central Asia and features of their junction are considered. It is shown that their outer contours and tectonic infrastructure are significantly distinct in the planar pattern: latitudinally linear and arched for the Hissar–Alai and the Pamirs, respectively. These structures logically match those of the Central Asian and Alpine–Himalayan belts, respectively. The Pamir orogen is a relatively autonomous structural element of the crust, which is located discordantly relative to the country lithospheric blocks. Most of the Pamirs (at least, the Northern and Central) probably form a giant allochthon on the ancient basement of the Tarim and Afghan–Tajik blocks. The junction zone of these two “hard” crustal segments is reflected in the transverse Transpamir threshold, which is expressed in the relief, deep structure, and seismicity. The specific geological structure of the junction zone of the Pamirs and Hissar–Alai (systems of the Tarim, Alai, and Afghan–Tajik troughs) is shown. It suggested that this zone is a damper, which significantly neutralizes the dynamic influence of the Pamir and the southernmost elements of the Pamir–Punjab syntax on Hissar–Alai structures.     

Geochemical evolution of groundwater in the Cambrian–Vendian aquifer system of the Baltic Basin

The shallowly buried marginal part of the Cambrian–Vendian confined aquifer system of the Baltic Basin is characterised by fresh and low δ¹⁸O composition water, whereas the deeply settled parts of the aquifer are characterized by typical Na–Ca–Cl basinal brines. Spatial variation in water geochemistry and stable isotope composition suggests mixing origin of the diluted water of three end-members—glacial melt water of the Weichselian Ice Age (115 000–10 000 BP), Na–Ca–Cl composition basin brine and modern meteoric water. The mixing has occurred in two stages. First, the intrusion and mixing of isotopically depleted glacial waters with basinal brines occurred during the Pleistocene glacial periods when the subglacial melt-water with high hydraulic gradient penetrated into the aquifer. The second stage of mixing takes place nowadays by intrusion of meteoric waters. The freshened water at the northern margin of the basin has acquired a partial equilibrium with the weakly cemented rock matrix of the aquifer.     

Geochemical and Sr–Nd isotopic characteristics of granitic rocks from northern Vietnam

Five major felsic igneous suites from northern Vietnam, with ages from mid-Proterozoic to early Cenozoic, were studied. Representative granitic rocks from the Posen Complex (mid-Proterozoic) and the Dienbien Complex (late Permian to early Triassic) show geochemical characteristics similar to those of calc-alkaline to high-K calc-alkaline I-type granites. However, the former, located in the South China block, has significantly higher initial Nd isotopic ratios [ε_Nd(T)=+0.7 to +1.5] and older Nd isotopic model ages (TDM∼1.7 Ga) than the latter [ε_Nd(T)=−4.7 to −9.7; T_DM∼1.3–1.5 Ga] which were emplaced south of the Song Ma Suture and thus in the Indochina block. The generation of both complexes may be attributed to subduction-related processes that occurred in two distinct crustal provenances with different degrees of mantle inputs. On the other hand, Jurassic to Cretaceous granitic rocks from the Phusaphin Complex, contemporaneous rhyolites from the Tule Basin, and late Paleogene granitic rocks from the Yeyensun Complex, all exposed in the South China block between the Ailao Shan–Red River shear zone and the Song Ma Suture, display geochemical features similar to those of A-type granites with intermediate ε_Nd(T) values (+0.6 to −2.8) and younger T_DM ages (0.6–1.1 Ga). These magmas are suggested to have been generated as a consequence of intraplate extension in the western part of the South China block (Yunnan), and to have been transported to their present position by mid-Tertiary continental extrusion along the Ailao Shan–Red River shear zone related to the India–Asia collision. Overall, the isotopic and model age data, reported in this study indicate that in northern Vietnam, the most important crust formation episode took place in the Proterozoic. Likewise, repeated mantle inputs have played a role in the petrogenesis of Phanerozoic granitic rocks.     

Geochemical Characteristics and Origin of Natural Gases in the Qaidam Basin, China

Sixty-five natural gas samples were collected from 19 oil-gasfields in the Qaidam basin, China. The chemical composition and carbon isotope values of the samples were measured, and the geochemical characteristics and origin of the natural gases were studied. The gases can be divided into biogenic gases, sapropelic oil-type gases, mixed type oil-type gases, coal-type gases and mixed gas. The δ13Ci values of the biogenic gases are very small and the C2+ contents of them are very low, ranging from -68.2‰ to -61.8‰ and 0.06% to 0.20% respectively. They have heavy δD and δ13Cco2> showing a CC>2 reduction pathway. They are distributed in the East depression region and derived from the Quaternary source rocks. The sapropelic oil-type gases have small δ13C2 values and high C2+ ranging from -36.6‰ to -28.6‰ and from 33.01% to 47.15% respectively. The mixed type oil-type gases have <5I3C2 values and C2+ contents varying from -28.6‰ to -24.8‰ and from 4.81% to 26.06% respectively. Both sapropelic oil-typ     

Geochemical/isotopic evolution of Pb–Zn deposits in the Central and Eastern Taurides,Turkey

The Central and Eastern Taurides contain numerous carbonate-hosted Pb–Zn deposits, mainly in Devonian and Permian dolomitized reefal–stramatolitic limestones, and in massive Jurassic limestones. We present and compare new fluid inclusion and isotopic data from these ore deposits, and propose for the first time a Mississippi Valley-type (MVT) mode of origin for them.

Fluid inclusion studies reveal that the ore fluids were highly saline (13–26% NaCl equiv.), chloride-rich (CaCl₂) brines, and have average homogenization temperatures of 112°C, 174.5°C, and 211°C for the Celal Da?, Delikkaya, and Ayrakl? deposits, respectively. Furthermore, the δ³⁴S values of carbonate-hosted Pb–Zn deposits in the Central and Eastern Taurides vary between –5.4‰ and?+13.70‰. This indicates a possible source of sulphur from both organic compounds and crustal materials. In contrast, stable sulphur isotope data (average δ³⁴S –0.15‰) for the Çad?rkaya deposit, which is related to a late Eocene–Oligocene (?) granodioritic intrusion, indicates a magmatic source. The lead isotope ratios of galena for all investigated deposits are heterogeneous. In particular, with the exception of the Suçat? district, all deposits in the Eastern (Delikkaya, Ayrakl?, Denizovas?, Çad?rkaya) and Central (Katranba??, Küçüksu) Taurides have high radiogenic lead isotope values (²⁰⁶Pb/²⁰⁴Pb between 19.058 and 18.622; ²⁰⁷Pb/²⁰⁴Pb between 16.058 and 15.568; and ²⁰⁸Pb/²⁰⁴Pb between 39.869 and 38.748), typical of the upper continental crust and orogenic belts.

Fluid inclusion, stable sulphur, and radiogenic lead isotope studies indicate that carbonate-hosted metal deposits in the Eastern (except for the Çad?rkaya deposit) and the Central Taurides are similar to MVT Pb–Zn deposits described elsewhere. The primary MVT deposits are associated with the Late Cretaceous–Palaeocene closure of the Tethyan Ocean, and formed during the transition from an extensional to a compressional regime. Palaeogene nappes that typically limit the exposure of ore bodies indicate a pre-Palaeocene age of ore formation. Host rock lithology, ore mineralogy, fluid inclusion, and sulphur?+?lead isotope data indicate that the metals were most probably leached from a crustal source such as clastic rocks or a crystalline massif, and transported by chloride-rich hydrothermal solutions to the site of deposition. Localization of the ore deposits on autochthonous basement highs indicates long-term basinal fluid migration, characteristic of MVT depositional processes. The primary MVT ores were oxidized in the Miocene, resulting in deposition of Zn-carbonate and Pb-sulphate–carbonate during karstification. The ores underwent multiple cycles of oxidation and, in places, were re-deposited to form clastic deposits. Modified deposits resemble the ‘wall-rock replacement’ and the ‘residual and karst fill’ of non-sulphide zinc deposits and are predominantly composed of smithsonite.     

Geochemical characteristics of crude oils from Well Zheng-1 in the Junggar Basin, Xinjiang, China

Well Zheng-1 is located in the combined area of the central uplift and the north Tianshan piedmont depression in the Junggar Basin. Two oil-bearing beds are recognized at 4788–4797 m of the Lower Cretaceous Tugulu Formation (K1tg) and 4808.5–4812.5 m of the Lower Jurassic Sangonghe Formation (J1s). The geochemical characteristics of family composition, carbon isotopic composition, saturated hydrocarbons, sterane and terpane biomarkers and carotane of two crude oils are described in this paper. The results show that the geochemical characteristics of the two crude oils are basically similar to each other, indicating they were all derived mainly from the high mature, brine, algae-rich lake facies sediments. Oil-source correlation revealed that crude oils of the two beds were derived mainly from the source rocks of Permian and mixed by the oil derived from the source rocks of Jurassic and Triassic. This is consistent with the geological background with several sets of source rocks in the area studied.     

Basin evolution and stratigraphic correlation of sedimentary-exhalative Zn–Pb deposits of the Early Cambrian Zarigan–Chahmir Basin,Central Iran

The Zarigan–Chahmir basin is placed in the southern part of a crustal domain known as the Central Iranian microcontinent, at the northwestern margin of Gondwana. This basin hosts abundant mineral deposits, particularly of the iron oxide–apatite (IOA), Fe–Mn exhalative, and Zn–Pb sedimentary-exhalative (SEDEX) types. The evolution of this basin is governed by the Proto-Tethys oceanic crust subduction beneath the Central Iranian microcontinent and by the resulting continental arc and back-arc. This evolution followed two major stages of rifting: (I) Stage I or syn-rift phase, related to intra-basin extension, is indicated by coarse-grained detrital sedimentary rocks and bimodal volcanism (basis of the Early Cambrian Volcano-Sedimentary Sequence; ECVSS), which filled half-graben systems. During this stage, tuff-hosted stratiform, exhalative Fe–Mn deposits along with Kiruna-type IOA deposits formed. The former deposits (e.g., Narigan) are related to early submarine rhyolithic volcanism of the rift-phase sequence, whereas the latter (e.g., Esfordi, Choghart, Chadormalu, Chahgaz) are connected to hydrothermal activity directly linked to the arc calk-alkaline magmatism. (II) Stage II or sag-phase involved the deposition of calcareous shales, siltstones and carbonates (upper part of the ECVSS). Sedimentation during this phase was controlled by basin subsidence and by the reactivation of the half-graben faults. SEDEX deposits are hosted within a carbonaceous, black siltstone unit of the sag-phase sequence, which was deposited during a period of rapid basin subsidence and under anoxic conditions. The location of synsedimentary faults and the prevalence of poorly-oxygenated bottom water conditions were key factors controlling SEDEX mineralization processes in the basin. A high geothermal gradient caused by maximum syn-rift magmatism and sub-crustal lithospheric thinning, affecting primarily the center, western and northwestern basin, may have driven a basin-scale hydrothermal fluid circulation. This finding explains the occurrence of larger, well correlable SEDEX deposits in the northwestern and central parts of the Zarigan–Chahmir basin.     

Molecular Geochemical Evidence for the Origin of Natural Gas from Dissolved Hydrocarbon in Ordovician Formation Waters in Central Ordos Basin

1IntroductionTheOrdosBasinisthesecondlargestoilandgas bearingbasininChina .ItislocatedinthePaleo zoicplatformandbelongstoacratonbasin ,whichisincongruencewiththePaleozoicdepressionattheedgesoftheplatformandtheMesozoic Cenozoicdepressionwithintheplatform .SincethediscoveryofnaturalgasesinWellShancan 1andWellYu 3in 1989,theassessmentandexplorationofOrdovicianweatheringcrustnaturalgasesintheOrdosBasinhaveattractedextensiveatten tion (YangJunjieetal.,1996 ;DaiJinxingetal.,1997) .Thecentral…     

Geochemical characteristics of pyrite in Duolanasayi gold deposit, Xinjiang

The Duolanasayi gold deposit, 60 km NW of Habahe County, Xinjiang Uygur Autonomous Region, is a mid-large-scale gold deposit controlled by brittle-ductile shearing, and superimposed by albitite veins and late-stage magma hydrothermal solutions. There are four types of pyrite, which are contained in the light metamorphosed rocks (limestone, siltstone), altered-mineralized rocks (chlorite-schist, altered albite-granite, mineralized phyllite), quartz veins and carbonatite veinlets. The pyrite is the most common ore mineral. The Au-barren pyrite is present mainly in a simple form and gold-bearing pyrite is present mainly in a composite form. From the top downwards, the pyrite varies in crystal form from {100} and {210} {100} to {210} {100} {111} to {100} {111}. Geochemical studies indicate that the molecular contents of pyrite range from Fe1.057S2 to Fe0.941S2. Gold positively correlates with Mn, Sr, Zn, Te, Pb, Ba and Ag. There are four groups of trace elements: Fe-Cu-Sr-Ag, Au-Te-Co, As-Pb-Zn and Mn-V-Ti-Ba-Ni-Cr in pyrite. The REE characteristics show that the total amount of REE (ΣREE) ranges from 32.35×10 -6 to 132.18×10 -6; LREE/HREE, 4.466-9.142; (La/Yb)N, 3.719-11.133; (Eu/Sm)N, 0.553-1.656; (Sm/Nd)N, 0.602-0.717; La/Yb, 6.26-18.75; δEu, 0.628-2.309; δCe, 0.308-0.816. Sulfur isotopic compositions (δ 34S=-2.46‰--7.02‰) suggest that the sulfur associated with gold mineralization was derived from the upper mantle or lower crust.     

Reservoir geochemistry of the Tazhong oilfield in the Tarim Basin, China, Part I. Geochemical characteristics and genetic classification of crude oils

1 Introduction Since the 1990’s of the 20th century, oil & gas geochemists have shifted their research focus on hydrocarbon source rocks in the past to that on reservoir rocks and oil reservoirs at present; their research field has been expanded from oil & gas exploration to the assessment of oil reservoirs and production & management. Therefore, reservoir geochemistry as a branch disciplinary of organic geochemistry is now attracting great concern of many oil & gas explorers and oilfield en…     

Reservoir geochemistry of the Tazhong oilfield in the Tarim Basin, China, Part Ⅰ. Geochemical characteristics and genetic classification of crude oils

According to the assemblage characteristics of saturated hydrocarbon biomarkers in crude oils and their geochemical implications, this study has proposed, for the first time, the criteria for the genetic classification of crude oils in the Tazhong area of the Tarim Basin, China. Crude oils from the area studied are classified as three genetic types： type-Ⅰ is characterized by the low contents of C29 norhopane, extremely abundant contents of gammacerane, low contents of rearranged sterane and relatively high contents of regular C28 sterane; the geochemical properties of type-Ⅱ crude oils are opposite to those of type-Ⅰ crude oils; the parameters for type-Ⅲ crude oils are intermediate between type-Ⅰ and type-Ⅱ. Results of oil correlation indicated that type-Ⅰ crude oils were derived from Cambrian-Lower Ordovician hydrocarbon source rocks, type-Ⅱ curde oils originated from Middle-Upper Ordovician hydrocarbon source rocks and type-Ⅲ crude oils are of mixed origin.