Tectonic control on the distribution of Palaeocene marine syn‐rift deposits in the Fenris Graben,northwestern Vøring Basin,offshore Norway

The location, shape and stacking pattern of deep‐marine clastic sediments on drifting stage passive continental margins are strongly influenced by the slope and basin floor topography. The tectonic control on sediment routes and dispersal patterns, however, is less understood on rift margins, particularly the impact of subaqueous transfer zones or relay ramps. In this study, an area of the Palaeocene marine syn‐rift succession in the Vøring Basin is mapped in detail to unravel the relationship between fault geometries and sedimentary infill patterns. Using root‐mean‐square (RMS) amplitudes and deposit thicknesses interpreted from seismic data, sedimentary elements in the Fenris Graben and the Gjallar Ridge are related to the fault patterns and the overall basin geometry. Older deposits are found to be aligned parallel to the basin axis, with the greatest sediment thicknesses on the hanging walls and adjacent to rotated faults. The main sediment supply is interpreted to be sourced from the Vøring Marginal High and Greenland, presumably containing a significant proportion of coarser grained material and comprising numerous local depocentres. With continued rifting and decreased fault activity, finer grained deposition draped the previous basin infill and smoothed the basin floor topography. Deposits close to the foot of relay ramps along the Gjallar Ridge, however, suggest that the high may have acted as a local sediment source leading to local depocentres. Transfer zones played a significant role in sediment transport during the early rifting phase, and were able to maintain some influence into the late rifting and early drifting stage. Identification of early‐ and late‐stage transfer zones may therefore help in locating coarser grained depocentres and potential hydrocarbon reservoirs.     

Structural and depositional controls on Plio‐Pleistocene submarine channel geometry (Taranaki Basin,New Zealand)

High‐quality 3D seismic data are used to investigate the effect of the Parihaka Fault on the geometry of submarine channels in Northern Graben of the Taranaki Basin, New Zealand. The Parihaka Fault comprises of four segments (S1–S4) with variable displacements. As part of the Plio‐Pleistocene Giant Foresets Formation, the older Channel Complex Systems 1 and 2 reveal a two‐stage evolution: (a) a syn‐tectonic depositional stage with channels incising the slope during early fault growth (ca. 4.5 Ma) and (b) a stage of sediment bypass (ca. 3 Ma) leading to the infill of hanging‐wall depocentres. The Channel Complex System 3 is syn‐tectonic relative to segment S3 and was formed at ca. 2.5 Ma. We show that the successive generation of new fault segments towards the north controlled the formation of depocentres in the study area. This occurred in association to rotation and uplift of the footwall block of the Parihaka Fault and subsidence of its hanging‐wall block, with fault activity controlling the orientation of channel systems. As a result, we observe three drainage types in the study area: oblique, transverse and parallel to the Parihaka Fault. This work is important as it shows that relay zones separating the Parihaka Fault segments had limited influence on the geometry and location of channel systems. Submarine channels were diverted from their original courses close to the Parihaka Fault and flowed transversally to fault segments instead of running through relay ramps, contrasting to what is often recorded in the literature. A plausible explanation for such a discrepancy relates to rapid progradation of the Giant Foresets Formation during the Plio‐Pleistocene, with channel complexes becoming less confined, favouring footwall incision and basinward deposition of submarine fans.     

Holocene mass‐wasting events in Lago Fagnano,Tierra del Fuego (54°S): implications for paleoseismicity of the Magallanes‐Fagnano transform fault

High‐resolution seismic imaging and coring in Lago Fagnano, located along a plate boundary in Tierra del Fuego, have revealed a dated sequence of Holocene mass‐wasting events. These structures are interpreted as sediment mobilizations resulting from loading of the slope‐adjacent lake floor during mass‐flow deposition. More than 19 mass‐flow deposits have been identified, combining results from 800 km of gridded seismic profiles used to site sediment cores. Successions of up to 6‐m thick mass‐flow deposits, pond atop the basin floor and spread eastward and westward following the main axis of the eastern sub‐basin of Lago Fagnano. We developed an age model, on the basis of information from previous studies and from new AMS‐¹⁴C ages on cored sediments, which allows us to establish a well‐constrained chronologic mass‐wasting event‐catalogue covering the last ～12 000 years. Simultaneously triggered, basin‐wide lateral slope failure and the formation of multiple debris flow and postulated megaturbidite deposits are interpreted as the fingerprint of paleo‐seismic activity along the Magallanes‐Fagnano transform fault that runs along the entire lake basin. The slope failures and megaturbidites are interpreted as recording large earthquakes occurring along the transform fault since the early Holocene. The results from this study provide new data about the frequency and possible magnitude of Holocene earthquakes in Tierra del Fuego, which can be applied in the context of seismic hazard assessment in southernmost Patagonia.     

Modelling of drainage dynamics influence on sediment routing system in a fold‐and‐thrust belt

Drainage networks link erosional landscapes and sedimentary basins in a source‐to‐sink system, controlling the spatial and temporal distribution of sediment flux at the outlets. Variations of accumulation rates in a sedimentary basin have been classically interpreted as changes in erosion rates driven by tectonics and/or climate. We studied the interactions between deformation, rainfall rate and the intrinsic dynamics of drainage basins in an experimental fold‐and‐thrust belt subjected to erosion and sedimentation under constant rainfall and shortening rates. The emergence of thrust sheets at the front of a prism may divert antecedent transverse channels (perpendicular to the structural grain) leading to the formation of longitudinal reaches, later uplifted and incorporated in the prism by the ongoing deformation. In the experiments, transverse incisions appear in the external slopes of the emerging thrust sheets. Headward erosion in these transverse channels results in divide migration and capture of the uplifted longitudinal channels located in the inner parts of the prism, leading to drainage network reorganization and modification of the sediment routing system. We show that the rate of drainage reorganization increases with the rainfall rate. It also increases in a nonlinear way with the rate of uplift. We explain this behaviour by an exponent > 1 on the slope variable in the framework of the stream power erosion model. Our results confirm the view that early longitudinal‐dominated networks are progressively replaced by transverse‐dominated rivers during mountain building. We show that drainage network dynamics modulate the distribution of sedimentary fluxes at the outlets of experimental wedges. We propose that under constant shortening and rainfall rates the drainage network reorganization can also modulate the composition and the spatial distribution of clastic fluxes in foreland basins.     

Late syn‐rift evolution of the Vingleia Fault Complex,Halten Terrace,offshore Mid‐Norway; a test of rift basin tectono‐stratigraphic models

Rift basin tectono‐stratigraphic models indicate that normal fault growth controls the sedimentology and stratigraphic architecture of syn‐rift deposits. However, such models have rarely been tested by observations from natural examples and thus remain largely conceptual. In this study we integrate 3D seismic reflection, and biostratigraphically constrained core and wireline log data from the Vingleia Fault Complex, Halten Terrace, offshore Mid‐Norway to test rift basin tectono‐stratigraphic models. The geometry of the basin‐bounding fault and its hangingwall, and the syn‐rift stratal architecture, vary along strike. The fault is planar along a much of its length, bounding a half‐graben containing a faultward‐thickening syn‐rift wedge. Locally, however, the fault has a ramp‐flat‐ramp geometry, with the hangingwall defined by a fault‐parallel anticline‐syncline pair. Here, an unusual bipartite syn‐rift architecture is observed, comprising a lower faultward‐expanding and an upper faultward‐thinning wedge. Fine‐grained basinfloor deposits dominate the syn‐rift succession, although isolated coarse clastics occur. The spatial and temporal distribution of these coarse clastics is complex due to syn‐depositional movement on the Vingleia Fault Complex. High rates of accommodation generation in the fault hangingwall led to aggradational stacking of fan deltas that rapidly (<5 km) pinch out basinward into offshore mudstone. In the south of the basin, rapid strain localization meant that relay ramps were short‐lived and did not represent major, long‐lived sediment entry points. In contrast, in the north, strain localization occurred later in the rift event, thus progradational shorefaces developed and persisted for a relatively long time in relay ramps developed between unlinked fault segments. The footwall of the Vingleia Fault Complex was characterized by relatively low rates of accommodation generation, with relatively thin, progradational hangingwall shorelines developed downdip of the fault block apex, sometime after the onset of sediment supply to the hangingwall. We show that rift basin tectono‐stratigraphic models need modifying to take into account along‐strike variability in fault structure and basin physiography, and the timing and style of syn‐rift sediment dispersal and facies, in both hangingwall and footwall locations.     

Structural controls on non fabric‐selective dolomitization within rift‐related basin‐bounding normal fault systems: Insights from the Hammam Faraun Fault,Gulf of Suez,Egypt

Fault‐controlled dolostone bodies have been described as potential hydrocarbon‐bearing reservoirs. Numerous case studies have described the shape and size of these often non fabric selective dolostone bodies within the vicinity of crustal‐scale lineaments, usually from Palaeozoic or Mesozoic carbonate platforms, which have undergone one or more phases of burial and exhumation. There has been little attention paid, however, to fault‐strike variability in dolostone distribution or the preferential localization of these bodies on particular faults. This study focuses on dolostone bodies adjacent to the Hammam Faraun Fault (HFF), Gulf of Suez. This crustal‐scale normal fault was activated in the Late Oligocene, coincident with the onset of extension within the Suez Rift. Dolomitization in the prerift Eocene Thebes Formation occurred in the immediate footwall of the HFF forming two massive, non facies selective dolostone bodies, ca. 500 m wide. Facies‐controlled tongues of dolostone on the margins of the massive dolostone bodies extend for up to 100 m. The geochemical signature of the dolostone bodies is consistent with replacement by Miocene seawater, contemporaneous with the rift climax and localization of strain along the HFF. A conceptual model of dolomitization from seawater that circulated within the HFF during the rift climax is presented. Seawater was either directly drawn down the HFF or circulated from the hanging wall basin via a permeable aquifer towards the HFF. The lateral extent of the massive dolostone bodies was controlled by pre‐existing HFF‐parallel fracture corridors on the outer margins of the damage zone of the fault. The behaviour of these fracture corridors alternated between acting as barriers to fluid flow before rupture and acting as flow conduits during or after rupture. Multiple phases of dolomitization and recrystallization during the ca. 10 Ma period in which dolomitization occurred led to mottled petrographical textures and wide‐ranging isotopic signatures. The localization of dolomitization on the HFF is interpreted to reflect its proximity to a rift accommodation zone which facilitated vertical fluid flow due to perturbed and enhanced stresses during fault interaction. It is possible that the presence of jogs along the strike of the fault further focused fluid flux. As such, it is suggested that the massive dolostones described in this study provide a window into the earliest stages of formation of fault‐controlled hydrothermal dolostone bodies, which could have occurred in other areas and subsequently been overprinted by more complex diagenetic and structural fabrics.     

Relay ramp evolution and mass flow deposition (Upper Kimmeridgian–Lower Volgian) in the Tail End Graben, Danish North Sea

The Central Graben in the Danish North Sea sector consists of a series of N–S to NW–SE trending, eastward‐tilted half‐grabens, bound to the east by the Coffee Soil Fault zone. This fault zone has a complex Jurassic history that encompasses at least two fault populations; N–S to NNW–SSE striking faults active in the Late Aalenian–Early Oxfordian, and NNW–SSE to WNW–ESE striking faults forming in Late Kimmeridgian time (sensu gallico), following a short period of tectonic quiescence. Sediment transport across the Coffee Soil Fault zone was controlled by fault array evolution, and in particular the development of relay ramps that formed potential entry points for antecedent drainage systems from the Ringkøbing–Fyn High east of the rift. Fault and isochore trends of the Upper Kimmeridgian–Lower Volgian succession in the northeast Danish Central Graben show that accommodation space was initially generated close to several minor, isolated or overlapping faults. Subsidence became focused along a few master faults in the Early Volgian through progressive linkage of selected faults. Seismic time isochore geometries, seismic facies, amplitude trends and well ties indicate the presence of coarse clastic lithologies locally along the fault zone. The deposits probably represent submarine mass flow deposits supplied from footwall degradation and possibly also from the graben hinterland via a relay ramp. The latter source appears to have been cut off as the relay ramp was breached and the footwall block are uplifted. Fault growth and linkage processes thus controlled the spatial and temporal trends of accommodation space generation and sediment supply to the rift basin.     

Depositional systems in multiphase rifts: seismic case study from the Lofoten margin,Norway

The evolution of depositional systems in multiphase rifts is influenced by the selective reactivation of faults between subsequent rift phases. The Middle Jurassic to Palaeocene tectonic history of the Lofoten margin, a segment of the North Atlantic rift system, is characterised by three distinct rift phases separated by long (>20 Myr) inter‐rift periods. The initial rift phase comprised a distinct fault initiation and linkage stage, whereas the later rift phases were characterised by selective reactivation of previously linked through‐going faults which resulted in immediate rift climax. Using 2‐D and 3‐D seismic reflection data in conjunction with shallow core data we present a 100 Myr record of shallow to deep marine depositional environments that includes deltaic clinoform packages, slope aprons and turbidite fans. The rapid re‐establishment of major faults during the later rift phases impacts on drainage systems and sediment supply. Firstly, the immediate localisation of strain and accumulation of displacement on few faults results in pronounced footwall uplift and possible fault block rotation along those faults, which makes it more likely for any antecedent fault‐transverse depositional systems to become reversed. Secondly, any antecedent axially‐sourced depositional systems that are inherited from the foregoing rift phase(s) are likely to be sustained after reactivation because such axial systems have already been directed around fault tips. Hence, the immediate localisation of strain through selective reactivation in the later rift phases restricts fault‐transverse sediment supply more than axial sediment supply, which is likely to be a key aspect of the tectono‐sedimentary evolution of multiphase rifts.     

The effect of fault relay and clay smearing on groundwater flow patterns in the Lower Rhine Embayment

Faults strongly impact groundwater flow in the unconsolidated sediments of the Lower Rhine Embayment. Hydraulic head maps show that many individual faults form a barrier to fluid flow whereas relay structures in these faults are sites of hydraulic contact between otherwise separated aquifers. The fluid flow patterns around the Rurrand Fault close to the largest open‐pit mine in the Lower Rhine Embayment is one of the first well‐documented examples of fluid flow around a fault relay zone. The effect of clay smearing could be quantified using the Shale Gouge Ratio (SGR) method that is common in hydrocarbon‐related studies but has not been applied to groundwater flow data so far. The effect of fault relay zones on groundwater flow is analysed using numerical simulations. It is concluded that fault relay needs special consideration in the evaluation of the sealing capacities of faults in sedimentary basins. Moreover, it is demonstrated that the SGR methodology is a promising tool for the estimation of fault zone hydraulic properties in hydrogeological modelling.     

Spatial distribution of micrometre‐scale porosity and permeability across the damage zone of a reverse‐reactivated normal fault in a tight sandstone: Insights from the Otway Basin,SE Australia

Knowledge of the permeability structure of fault‐bearing reservoir rocks is fundamental for developing robust hydrocarbon exploration and fluid monitoring strategies. Studies often describe the permeability structure of low porosity host rocks that have experienced simple tectonic histories, while investigations of the influence of faults with multiple‐slip histories on the permeability structure of porous clastic rocks are limited. We present results from an integrated petrophysical, microstructural, and mineralogical investigation of the Eumeralla Formation (a tight volcanogenic sandstone) within the hanging wall of the Castle Cove Fault which strikes 30 km NE–SW in the Otway Basin, southeast Australia. This late Jurassic to Cenozoic‐age basin has experienced multiple phases of extension and compression. Core plugs and thin sections oriented relative to the fault plane were sampled from the hanging wall at distances of up to 225 m from the Castle Cove Fault plane. As the fault plane is approached, connected porosities increase by ca. 10% (17% at 225 m to 24% at 0.5 m) and permeabilities increase by two orders of magnitude (from 0.04 mD at 225 m to 1.26 mD at 0.5 m). Backscattered Scanning Electron Microscope analysis shows that microstructural changes due to faulting have enhanced the micrometre‐scale permeability structure of the Eumeralla Formation. These microstructural changes have been attributed to the formation of microfractures and destruction of original pore‐lining chlorite morphology as a result of fault deformation. Complex deformation, that is, formation of macrofractures, variably oriented microfractures, and a hanging wall anticline, associated with normal faulting and subsequent reverse faulting, has significantly influenced the off‐fault fluid flow properties of the protolith. However, despite enhancement of the host rock permeability structure, the Eumeralla Formation at Castle Cove is still considered a tight sandstone. Our study shows that high‐resolution integrated analyses of the host rock are critical for describing the micrometre‐scale permeability structure of reservoir rocks with high porosities, low permeabilities, and abundant clays that have experienced complex deformation.     

The role of fault length,overlap and spacing in controlling extensional relay ramp fluvial system geometry

Relay ramps are integral components of normal fault systems that control sediment transport pathways in evolving rifts. We attribute differences in the geometry of fluvial systems that drain relay ramps to the scale of the ramp bounding fault segments, the spacing between segments and the amount of overlap between segments. Previous conceptual models for relay ramp geomorphological evolution have assumed that ramp fluvial catchments develop on the ramp surfaces and flow parallel to fault strike into the adjacent basin. Numerous examples exist in nature, however, that show that this is not ubiquitous. The fundamental question of what drives differences in fluvial geometry in these settings has, to date, not been fully addressed. We selected 27 relay ramps across the Basin and Range, western North America, and mapped, via GPS and remote sensing, the faults and ramp fluvial systems associated with each site. The sites represent a range of fault scales, which we define by the total outboard fault length, and a range of spacing and overlap values in order to better understand the structural controls on differences among ramp fluvial systems. Results show that the majority of a relay ramp surface drains parallel to fault strike when the outboard fault is less than about 15 km long. High overlap/spacing ratios are associated with relays along shorter (<15 km long) outboard faults, whereas lower overlap/spacing ratios are associated with relays along longer faults. Relays with lower overlap/spacing values may be more common along longer outboard faults because they survive for longer periods of time in the landscape. Our geomorphological observations can be used to predict synrift depocenter locations along segmented faults, but these observations only apply if the faults are short (<15 km long) and in early rifting stages. At longer fault lengths, ramp fluvial system geometry has no discernable relationship with any specific structural parameter.     

The quantifiable clinothem – types,shapes and geometric relationships in the Plio‐Pleistocene Giant Foresets Formation,Taranaki Basin,New Zealand

The understanding of how clinoforms develop is approached based on shape and dimensions, correlation between geometric parameters, and internal characteristics of clinothems bounded by clinoform surfaces in high‐resolution 2D seismic data from the Giant Foresets Formation, Taranaki Basin, offshore New Zealand. The study subdivides the observed clinothems to identify nine types: 1. Oblique 2. Tangential oblique 3. Tangential oblique chaotic 4. Sigmoidal symmetrical 5. Sigmoidal divergent 6. Sigmoidal chaotic 7. Asymmetrical top‐heavy 8. Asymmetrical bottom‐heavy 9. Complex. Accommodation is a dominant control on the type of clinothem that develops, whereby limited accommodation promotes clinothems with significant shelf‐edge advance and low trajectory angles, while increasing accommodation promotes higher trajectory angles and increased deposition on the shelf. Further variations in shape, slope and deposition are influenced by many factors of which sediment influx appears be a fundamental driver. Sigmoidal clinothems tend to show a strong relationship between their maximum thickness and average thickness, their overall slope and maximum foreset angle, along with a high correlation between average thickness and toe advance. This suggests that they distribute sediment in a manner that may be possible to predict and quantify. The increasing steepness of the foreset slope from bottom‐heavy to symmetrical to top‐heavy clinothems, respectively, is dominantly the result of decreasing sediment influx. The clinothems with the steepest slopes, along with chaotic clinothems, are associated with comparatively large toe advance suggesting a strong link between over‐steepened slopes and/or collapse, and processes promoting sediment deposition along the basin floor. Apart from toe advance, the two types of chaotic clinothems develop differently from each other, and from their assumed parent‐clinothem. Tangential oblique chaotic forms steepen, and shelf‐edge advance is limited, suggesting upper slope collapse. Sigmoidal chaotic clinothems have comparatively higher shelf‐edge advance, lower shelf‐edge trajectories and gentler slopes and profiles, suggesting different processes are responsible for their development and resulting shape.     

Relationships between morphological and sedimentological parameters in source‐to‐sink systems: a basis for predicting semi‐quantitative characteristics in subsurface systems

The study of source‐to‐sink systems relates long‐term variations in sediment flux to morphogenic evolution of erosional–depositional systems. These variations are caused by an intricate combination of autogenic and allogenic forcing mechanisms that operate on multiple time scales – from individual transport events to large‐scale filling of basins. In order to achieve a better understanding of how these mechanisms influence morphological characteristics on different scales, 29 submodern source‐to‐sink systems have been investigated. The study is based on measurements of morphological parameters from catchments, shelves and slopes derived from a ∼1 km global digital elevation model dataset, in combination with data on basin floor fans, sediment supply, water discharge and deposition rates derived from published literature. By comparing various morphological and sedimentological parameters within and between individual systems, a number of relationships governing system evolution and behaviour are identified. The results suggest that the amount of low‐gradient floodplain area and river channel gradient are good indicators for catchment storage potential. Catchment area and river channel length is also related to shelf area and shelf width, respectively. Similarly to the floodplain area, these parameters are important for long‐term storage of sediment on the shelf platform. Additionally, the basin floor fan area is correlative to the long‐term deposition rate and the slope length. The slope length thus proves to be a useful parameter linking proximal and distal segments in source‐to‐sink systems. The relationships observed in this study provide insight into segment scale development of source‐to‐sink systems, and an understanding of these relationships in modern systems may result in improved knowledge on internal and external development of source‐to‐sink systems over geological time scales. They also allow for the development of a set of semi‐quantitative guidelines that can be used to predict similar relationships in other systems where data from individual system segments are missing or lacking.     

Novel discrete element modelling of Gilbert‐type delta formation in an active tectonic setting—first results

Gilbert deltas are now recognised as an important stratigraphic component of many extensional basins. They are remarkable due to their coarse‐grained nature, large size and steep foresets (up to 30–35°) and may exhibit a variety of slope instability features (faulting, slump scars, avalanching, etc.). They are also often closely related to major, basin‐margin normal faults. There has been considerable research interest in Gilbert deltas, partly due to their economic significance as stratigraphic traps for hydrocarbons but also due to their sensitivity to relative base level changes, giving them an important role in basin analysis. In addition to field studies, numerical modelling has also been used to simulate such deltas, with some success. However, until now, such studies have typically employed continuum numerical techniques where the basic data elements created by simulations are stratigraphic volumes or timelines and the sediments themselves have no internal properties per se and merely represent areas/volumes of introduced coarse‐grained, clastic and sedimentary material. Faulting or folding (if present) are imposed externally and do not develop (naturally) within the modelled delta body itself. Here, I present first results from a novel 2D numerical model which simulates coarse‐grained (Gilbert‐type) deltaic sedimentation in an active extensional tectonic setting undergoing a relative base level rise. Sediment is introduced as packages of discrete elements which are deposited beneath sea level, from the shoreline, upon a pre‐existing basin or delta. These elements are placed carefully and then allowed to settle onto the system. The elements representing the coarse‐grained, deltaic sediments can have an intrinsic coefficient of friction, cohesion or other material properties appropriate to the system being considered. The spatial resolution of the modelling is of the order of 15 m and topsets, foresets, bottomsets, faults, slumps and collapse structures all form naturally in the modelled system. Examples of deltas developing as a result of sediment supply from both the footwall and hanging‐wall of a normal fault, and subject to changes in fault slip rate are presented. Implications of the modelling approach, and its application and utility in basin research, are discussed.     

Event sedimentation in low‐latitude deep‐water carbonate basins,Anegada passage,northeast Caribbean

The Virgin Islands and Whiting basins in the Northeast Caribbean are deep, structurally controlled depocentres partially bound by shallow‐water carbonate platforms. Closed basins such as these are thought to document earthquake and hurricane events through the accumulation of event layers such as debris flow and turbidity current deposits and the internal deformation of deposited material. Event layers in the Virgin Islands and Whiting basins are predominantly thin and discontinuous, containing varying amounts of reef‐ and slope‐derived material. Three turbidites/sandy intervals in the upper 2 m of sediment in the eastern Virgin Islands Basin were deposited between ca. 2000 and 13 600 years ago, but do not extend across the basin. In the central and western Virgin Islands Basin, a structureless clay‐rich interval is interpreted to be a unifite. Within the Whiting Basin, several discontinuous turbidites and other sand‐rich intervals are primarily deposited in base of slope fans. The youngest of these turbidites is ca. 2600 years old. Sediment accumulation in these basins is low (<0.1 mm year^?1) for basin adjacent to carbonate platform, possibly due to limited sediment input during highstand sea‐level conditions, sediment trapping and/or cohesive basin walls. We find no evidence of recent sediment transport (turbidites or debris flows) or sediment deformation that can be attributed to the ca. M7.2 1867 Virgin Islands earthquake whose epicentre was located on the north wall of the Virgin Islands Basin or to recent hurricanes that have impacted the region. The lack of significant appreciable pebble or greater size carbonate material in any of the available cores suggests that submarine landslide and basin‐wide blocky debris flows have not been a significant mechanism of basin margin modification in the last several thousand years. Thus, basins such as those described here may be poor recorders of past natural hazards, but may provide a long‐term record of past oceanographic conditions in ocean passages.     

Three-dimensional analogue modelling of an alluvial basin margin affected by hydrological cycles: processes and resulting depositional sequences

The dynamics between sediment erosion and accumulation at an alluvial basin margin affected by changes in the surface hydrology are explored using scaled analogue models produced in a flume. The presented results differ from previous counterparts in that accumulation or erosion has not been forced at a spreading outlet, but occurred at a slope change produced by previously accumulated sediment. Cyclical upstream incision produced by increased stream discharge generated incised valleys, and these were subsequently filled by sediment carried by less efficient streams generated during the low discharge period. High resolution mapping using 2.5 mm contour maps allowed the study of sediment accumulation and terrain modelling. The results of three selected experiments are analysed. The only variable explored was discharge. The basin margin was simulated by a ramp inserted in a low sloping flume, consisting of two segments of different slopes selected to emulate high and low efficiency flume fans produced elsewhere. Water and fine‐medium sand entered the ramp along a narrow (0.1 m) channel and flow expanded but without occupying the complete 1.2 m flume width. Flows were highly concentrated and noncohesive. Fan‐like accumulation (slope: 0.11) began during low discharge (LD) periods at the ramp slope break, and proceeded upstream, onlapping quickly at first, but shifting to mostly progradation at the end of the period. High discharges (HD) usually generated two or three incised channels at the beginning of the period, but one of them prevailed and rapidly eroded parts of the LD fan and moved the sediment to a more distal low‐sloping fan (slope: 0.045). Both LD and HD fans passed downstream into a system of small parallel channels resembling a braided alluvial plain ending in sediment lobes. The mapping of the accumulated sediment during the various periods allowed calculation of sediment budgets for the entire flume. The stratal architecture of the deposits was investigated along five parallel trenches cut after experiment termination. The regression analysis of depositional profiles at fan‐like features (expanding flow) and at braided plains (parallel flow) indicated that these fan‐like systems are linear and dependent on applied discharge, while the latter showed an exponential decrease of slope downstream, with a starting value set up by the fan slope. Two main types of stratigraphic units were generated, the LDST and HDST (system tracts). The LDST has a nonerosive base over ‘bedrock’ and the previous HDST, filling proximal erosional topography and prograding as well, generating an onlap–downlap array. Its geometry is highly variable and dependent on pre‐existing topography. The HDST base is an important erosive surface comparable to sequence boundaries. However, there are places without erosion due to a marginal position with respect to the main stream. Indeed, the results suggest that the three‐dimensional variability of erosion and depositional processes might produce very different architectures along the same basin margin.     

Late Ordovician,deep‐water gravity‐flow deposits,palaeogeography and tectonic setting,Tarim Basin,Northwest China

The Upper Ordovician in the Tarim Basin contains 5000–7000 m of siliciclastic and calciclastic deep‐water, gravity‐flow deposits. Their depositional architecture and palaeogeographical setting are documented in this investigation based on an integrated analysis of seismic, borehole and outcrop data. Six gravity‐flow depositional–palaeogeomorphological elements have been identified as follows: submarine canyon or deeply incised channels, broad and shallow erosional channels, erosional–depositional channel and levee–overbank complexes, frontal splays‐lobes and nonchannelized sheets, calciclastic lower slope fans and channel lobes or sheets, and debris‐flow complexes. Gravity‐flow deposits of the Sangtamu and Tierekeawati formations comprise a regional transgressive‐regressive megacycle, which can be further classified into six sequences bounded by unconformities and their correlative conformities. A series of incised valleys or canyons and erosional–depositional channels are identifiable along the major sequence boundaries which might have been formed as the result of global sea‐level falls. The depositional architecture of sequences varies from the upper slope to abyssal basin plain. Palaeogeographical patterns and distribution of the gravity‐flow deposits in the basin can be related to the change in tectonic setting from a passive continental margin in the Cambrian and Early to Middle Ordovician to a retroarc foreland setting in the Late Ordovician. More than 3000 m of siliciclastic submarine‐fan deposits accumulated in south‐eastern Tangguzibasi and north‐eastern Manjiaer depressions. Sedimentary units thin onto intrabasinal palaeotopographical highs of forebulge origin and thicken into backbulge depocentres. Sediments were sourced predominantly from arc terranes in the south‐east and the north‐east. Slide and mass‐transport complexes and a series of debris‐flow and turbidite deposits developed along the toes of unstable slopes on the margins of the deep‐water basins. Turbidite sandstones of channel‐fill and frontal‐splay origin and turbidite lobes comprise potential stratigraphic hydrocarbon reservoirs in the basin.     

Source‐to‐sink analysis of ancient sedimentary systems using a subsurface case study from the Møre‐Trøndelag area of southern Norway: Part 1 – depositional setting and fan evolution

In this study, we use seismic reflection, well and core data to investigate the role that basin physiography and sediment routing systems played on the distribution, geometry and stratigraphic architecture of Upper Cretaceous submarine fans (SF) offshore Norway. The Late Cretaceous Møre‐Trøndelag margin of western Norway was characterised by steep submarine slopes (gradient of ~0.3°–3°). Mudstones dominate the Upper Cretaceous slope succession, although a few regionally extensive, sandstone‐dominated units are developed. We focus on the most regionally extensive sandstone unit, which is of Late Turonian‐to‐Early Coniacian age. Mapping and visualisation of 2D and 3D seismic reflection data and analysis of well data indicates that the sandstone unit comprises a total of 11 SF, which were fed by sand‐rich sediment gravity flows routed through multiple upper slope canyons. Based on the internal organisation of seismic facies, four fan types have been identified: (i) Type Ia fans, which are characterised by <10 erosional channel complexes at their bases and aggradational to landward‐stepping lobes in their upper parts; (ii) Type Ib fans, which are characterised by >10 erosional channel complexes at their bases and aggradational to landward‐stepping lobe and mass‐transport deposits near the fan apex in their upper parts; (iii) Type II fans, which are dominated by aggradational lobe deposits; and (iv) Type III fans, which are dominated by a single channel complex that passes downdip into a small terminal lobe. The different fan types are interpreted to reflect variable stratigraphic responses to source proximity and basin physiography, which is principally related to the degree of local fault reactivation and differential compaction. This variability highlights the diversity of fan types that may occur over short distances along continental margins, and demonstrates the importance of local controls in understanding the internal stratigraphic variability that may be present in deep‐marine successions.     

Tectono‐climatic evolution of a Neogene intramontane basin (Late Miocene Carboneras subbasin,southeast Spain): revelations from basin mapping and biofacies analysis

Exceptional 3‐D exposures of fault blocks forming a 5 km × 10 km clastic sediment‐starved, marine basin (Carboneras subbasin, southeast Spain) allow a test of the response of carbonate sequence stratigraphic architectures to climatic and tectonic forcing. Temperate and tropical climatic periods recorded in biofacies serve as a chronostratigraphic framework to reconstruct the status of the basin within three time‐slices (late Tortonian–early Messinian, late Messinian, Pliocene). Structural maps and isopach maps trace out the distribution of fault blocks, faults, and over time, their relative motions, propagational patterns and life times, which demonstrate a changing layout of the basin because of a rotation of the regional transtensional stress field. Progradation of early Messinian reefal systems was perpendicular to the master faults of the blocks, which were draped by condensed fore‐slope sediments. The hangingwall basins coincided with the toe‐of‐slope of the reef systems. The main phase of block faulting during the late Tortonian and earliest Messinian influenced the palaeogeography until the late Pliocene (cumulative throw < 150–240 m), whereas displacements along block bounding faults, which moved into the hangingwall, died out over time. An associated shift of the depocentres of calciturbidites, slump masses and fault scarp degradation breccias reflects 500–700 m of fault propagation into the hangingwall. The shallow‐water systems of the footwall areas were repeatedly subject to emergence and deep peripheral erosion, which imply slow net relative uplift of the footwall. In the dip‐slope settings, erosional truncations of tilted proximal deposits prevail, which indicate rotational relative uplift. Block movements were on the order of magnitude of third order sea‐level fluctuations during the late Tortonian and earliest Messinian. We suggest that this might be the reason for the common presence of offlapping geometries in early Messinian reef systems of the Betic Cordilleras. During the late Pliocene, uplift rates fell below third order rates of sea‐level variations. However, at this stage, the basin was uplifted too far to be inundated by the sea again. The evolution of the basin may serve as a model for many other extensional basins around the world.     

Changes in bedrock channel morphology driven by displacement rate increase during normal fault interaction and linkage

We attribute changes in the morphology of relay ramp channels (increased slope and decreased width) to variations in displacement rate on ramp‐adjacent normal faults. We map the faults and fluvial channels associated with four sites in different stages of fault interaction and linkage on the Volcanic Tableland, a Late Pleistocene ash‐flow tuff in east‐central California. Because these channels are inactive today, we estimate downstream changes in channel width and depth using HEC‐RAS, a one‐dimensional open channel flow model. Our results show that channel slope must be greater than about 0.05 before there are substantial decreases in width or substantial increases in depth. Displacement rate increases during interaction between en echelon segments results in the increases in channel slope and decreases in channel width. Moreover, our data show that these changes begin to occur during the very early stages of fault interaction, well before the fault geometry would indicate ongoing or imminent linkage.