Trench-forearc interactions reflected in the sedimentary fill of Talara basin, northwest Peru

Exceptional exposure of the forearc region of NW Peru offers insight into evolving convergent margins. The sedimentary fill of the Talara basin spans the Cretaceous to the Eocene for an overall thickness of 9000 m and records within its stratigraphy the complicated history of plate interactions, subduction tectonics, terrane accretion, and Andean orogeny. By the early Tertiary, extensional tectonism was forming a complex horst and graben system that partitioned the basin into a series of localized depocentres. Eocene strata record temporal transitions from deltaic and fluvial to deep‐water depositional environments as a response to abrupt, tectonically controlled relative sea‐level changes across those depocentres. Stratigraphic and provenance data suggest a direct relationship between sedimentary packaging and regional tectonics, marked by changes in source terranes at major unconformities. A sharp shift is recognized at the onset of deepwater (bathyal) sedimentation of the Talara Formation, whose sediments reflect an increased influx of mafic material to the basin, likely related to the arc region. Although the modern topography of the Amotape Mountains partially isolates the Talara basin from the Lancones basin and the Andean Cordillera to the east, provenance data suggest that the Amotape Mountains were not always an obstacle for Cordilleran sediment dispersal. The mountain belt intermittently isolated the Talara basin from Andean‐related sediment throughout the early Tertiary, allowing arc‐related sediment to reach the basin only during periods of subsidence in the forearc region, probably related to plate rearrangement and/or seamounts colliding with the trench. Intraplate coupling and/or partial locking of subduction plates could be among the major causes behind shifts from contraction to extension (and enhanced subduction erosion) in the forearc region. Eventually, collisional tectonic and terrane accretion along the Ecuadorian margin forced a major late‐Eocene change in sediment dispersal.     

Monoclinal flexure of an orogenic plateau margin during subduction,south Turkey

Geologic evidence across orogenic plateau margins enables the discrimination of the relative contributions of orogenic, epeirogenic and/or climatic processes that lead to growth and maintenance of those plateaus and their margins. Here, we discuss the mode of formation of the southern margin of the Central Anatolian Plateau (SCAP) and evaluate its time of formation using fieldwork in the onshore and seismic reflection data in the offshore. In the onshore, uplifted Miocene rocks in a dip‐slope topography show monocline flexure over >100 km, km‐scale asymmetric folds verging south, and outcrop‐scale syn‐sedimentary reverse faults. On the Turkish shelf, vertical faults transect the basal latest Messinian of a 10 km fold where on‐structure syntectonic wedges and synsedimentary unconformities indicate pre‐Pliocene uplift and erosion, followed by Pliocene and younger deformation. Collectively, Miocene rocks delineate a flexural monocline at plateau margin scale that is expressed along our on‐offshore sections as a kink‐band fold with a steep flank 20–25 km long. In these reconstructed sections, we estimate a relative vertical displacement of 3.8 km at rates of ca. 0.5 mm/y, and horizontal shortening values <1 %. We use this evidence together with our observations of shortening at outcrop, basin, plateau‐margin and forearc‐system scales to infer that the SCAP forms as a monoclinal flexure to accommodate deep‐seated thickening and shortening since >5 Ma, and to contextualize the plateau margin as the forearc high of the Cyprus subduction system.     

Quantitative analysis of Miocene to Recent forearc basin evolution along the Colombian convergent margin

The Colombian accretionary complex forms the active convergent margin of the North Andes block of South America beneath which the east Panama Basin of the Nazca plate is subducted at a rate of 50–64 km Myr^?1. Multichannel seismic reflection data, collected as part of RRS Charles Darwin cruise CD40, image a series of well-developed forearc basins along the length of the margin, bounded on their oceanward side by an active accretionary complex and on their landward side by oceanward-dipping continental basement. Sedimentary sequences within the forearc basins indicate successive landward migration of the basin depocentre as the structural high bounding its oceanward edge is forced upward and landward by continued growth of the accretionary complex. Uplift beneath the oceanward side of the basins has resulted in progressive landward rotation of the older sedimentary sequences. Prominent seismic reflectors across the basins show a complex onlap–offlap relationship between successive sequences that reflects the interplay between tectonic uplift, sediment supply, differential sediment compaction and basement subsidence due to loading. A numerical model has been devised to investigate how Miocene to Recent forearc basin stratigraphy is controlled by progressive growth of the accretionary complex resulting in elevation of the outer-arc high and landward motion of the rear of the complex up the seaward-dipping backstop formed by the leading edge of the continental lithosphere. The effects of sediment accretion are modelled by treating the accretionary complex as a doubly vergent, noncohesive Coulomb wedge, where forces exerted by the proto- and retro-wedges must be balanced for the system to be in equilibrium. The model generates synthetic basin-fill architecture over a series of steps, each of which represents the deposition of individual sedimentary sequences and their subsequent deformation due to wedge growth. The model accounts for differential sediment compaction and the flexural response of the underlying lithosphere to changes in load distribution over time. Forearc basin evolution is simulated for various rates of sediment supply to the forearc and accretionary complex growth until the synthetic basin-fill geometry matches the observed geometry. The model enables either the rate of accretionary wedge growth or the rate of sediment supply to the forearc basin to be established. The technique is generally applicable to those convergent margins with forearc basins that have developed between an actively accreting wedge and a seaward-dipping backstop. Other examples include Peru, S. Chile, Sumatra and Barbados.     

Burial history of Late Neogene sedimentary basins on part of the New Zealand convergent plate margin

Abstract Burial histories of Late Neogene sedimentary basins on the Wairarapa fold and thrust belt of the Hikurangi convergent plate margin (New Zealand) have been deduced from decompacted sedimentary columns and palaeo-waterdepths. These indicate that at least two major cycles of basement subsidence and uplift have occurred since 15 Ma. The older (15-10 Ma) cycle affected outer areas of the forearc. Subsidence, at a minimum rate of 0.5-0.6 mm/yr, was followed by rapid uplift. The subsequent (10 Ma to present) cycle affected a broad area of the inner forearc. Subsidence, at an average rate 0.33 mm/yr, was followed by uplift at an average rate of 0.5-1.5 mm/yr. Vertical movement is continuing, with uplift of the axial greywacke ranges and development of the Wairarapa Depression.
Palinspastic reconstructions of the inner forearc region indicate that basin development was characterized by a see-saw oscillation in basin orientation, with the axis of the basin and direction of basin tilt switching back and forth from east to west through time. A large-scale change in basin orientation took place around 2 Ma when the westernmost part of Wairarapa began to rise on the flanks of the rising Tararua Range, associated with the ramping of the Australian Plate up and over the subducted Pacific Plate. Loading of the forearc is unlikely to have been a significant cause of basement subsidence before this event. Earlier phases of basin development associated with basement subsidence and uplift may be related to a complex interplay of tectonic factors, including the westward migration of the subducted Pacific Plate as it passed beneath southern North Island during Miocene time, episodes of locking and unlocking of parts of the plate interface, and growth of the accretionary prism.     

Integrated provenance record of a forearc basin modified by slab‐window magmatism: detrital‐ zircon geochronology and sandstone compositions of the Paleogene Arkose Ridge Formation,south‐central Alaska

This study presents an integrated provenance record for ancient forearc strata in southern Alaska. Paleocene–Eocene sedimentary and volcanic strata >2000 m thick in the southern Talkeetna Mountains record nonmarine sediment accumulation in a remnant forearc basin. In these strata, igneous detritus dominates conglomerate and sandstone detrital modes, including plutonic and volcanic clasts, plagioclase feldspar, and monocrystalline quartz. Volcanic detritus is more abundant and increases upsection in eastern sandstone and conglomerate. U‐Pb ages of >1600 detrital zircons from 19 sandstone samples document three main populations: 60–48 Ma (late Paleocene–Eocene; 14% of all grains), 85–60 Ma (late Cretaceous–early Paleocene; 64%) and 200–100 Ma (Jurassic–Early Cretaceous; 11%). Eastern sections exhibit the broadest distribution of detrital ages, including a principal population of late Paleocene–Eocene ages. In contrast, central and western sections yield mainly late Cretaceous–early Paleocene detrital ages. Collectively, our results permit reconstruction of individual fluvial drainages oriented transverse to a dissected arc. Specifically, new data suggest: (1) Detritus was eroded from volcanic‐plutonic sources exposed along the arcward margin of the sampled forearc basin fill, primarily Jurassic–Paleocene magmatic‐arc plutons and spatially limited late Paleocene–Eocene volcanic centers; (2) Eastern deposystems received higher proportions of juvenile volcanic detritus through time from late Paleocene–Eocene volcanic centers, consistent with emplacement of a slab window beneath the northeastern part of the basin during spreading‐ridge subduction; (3) Western deposystems transported volcanic‐plutonic detritus from Jurassic–Paleocene remnant arc plutons and local eruptive centers that flanked the northwestern part of the basin; (4) Diagnostic evidence of sediment derivation from accretionary‐prism strata exposed trenchward of the basin fill is lacking. Our results provide geologic evidence for latest Cretaceous–early Paleocene exhumation of arc plutons and marine forearc strata followed by nonmarine sediment accumulation and slab‐window magmatism. This inferred history supports models that invoke spreading‐ridge subduction beneath southern Alaska during Paleogene time, providing a framework for understanding a mature continental‐arc/forearc‐basin system modified by ridge subduction. Conventional provenance models predict reduced input of volcanic detritus to forearc basins during progressive exhumation of the volcanic edifice and increasing exposure of subvolcanic plutons. In contrast, our results show that forearc basins influenced by ridge subduction may record localized increases in juvenile volcanic detritus during late‐stage evolution in response to accumulation of volcanic sequences formed from slab‐window eruptive centers.     

Tectono‐sedimentary evolution of the northern Iranian Plateau: insights from middle–late Miocene foreland‐basin deposits

Sedimentary basins in the interior of orogenic plateaus can provide unique insights into the early history of plateau evolution and related geodynamic processes. The northern sectors of the Iranian Plateau of the Arabia–Eurasia collision zone offer the unique possibility to study middle–late Miocene terrestrial clastic and volcaniclastic sediments that allow assessing the nascent stages of collisional plateau formation. In particular, these sedimentary archives allow investigating several debated and poorly understood issues associated with the long‐term evolution of the Iranian Plateau, including the regional spatio‐temporal characteristics of sedimentation and deformation and the mechanisms of plateau growth. We document that middle–late Miocene crustal shortening and thickening processes led to the growth of a basement‐cored range (Takab Range Complex) in the interior of the plateau. This triggered the development of a foreland‐basin (Great Pari Basin) to the east between 16.5 and 10.7 Ma. By 10.7 Ma, a fast progradation of conglomerates over the foreland strata occurred, most likely during a decrease in flexural subsidence triggered by rock uplift along an intraforeland basement‐cored range (Mahneshan Range Complex). This was in turn followed by the final incorporation of the foreland deposits into the orogenic system and ensuing compartmentalization of the formerly contiguous foreland into several intermontane basins. Overall, our data suggest that shortening and thickening processes led to the outward and vertical growth of the northern sectors of the Iranian Plateau starting from the middle Miocene. This implies that mantle‐flow processes may have had a limited contribution toward building the Iranian Plateau in NW Iran.     

Sedimentology,provenance and geochronology of the upper Cretaceous–lower Eocene western Xigaze forearc basin,southern Tibet

Located on the southern margin of the Lhasa terrane in southern Tibet, the Xigaze forearc basin records Cretaceous to lower Eocene sedimentation along the southern margin of Asia, prior to and during the initial stages of continental collision with the Tethyan Himalaya in the Early Eocene. We present new measured stratigraphic sections, totalling 4.5 km stratigraphic thickness, from a 60 km E–W segment of the western portion of the Xigaze forearc basin, northeast of the Lopu Kangri Range (29.8007° N, 84.91827° E). In addition, we apply U–Pb detrital zircon geochronology to constrain the provenance and maximum depositional ages of investigated strata. Stratigraphic ages range between ca. 88 and ca. 54 Ma and sedimentary facies indicate a shoaling‐upward trend from deep‐marine turbidites to fluvial deposits. Depositional environments of coeval Cretaceous strata along strike include deep‐marine distal turbidites, slope‐apron debris‐flow deposits and marginal marine carbonates. This along‐strike variability in facies suggests an irregular paleogeography of the Asian margin prior to collision. Paleocene–Eocene strata are composed of shallow marine carbonates with abundant foraminifera such as Nummulites‐Discocyclina and Miscellanea‐Daviesina and transition into fluvial deposits dated at ca. 54 Ma. Sandstone modal analyses, conglomerate clast compositions and detrital zircon U–Pb geochronology indicate that forearc detritus in this region was derived solely from the Gangdese magmatic arc to the north. In addition, U–Pb detrital zircon age spectra within the upper Xigaze forearc stratigraphy are similar to those from Eocene foreland basin strata south of the Indus‐Yarlung suture near Sangdanlin, suggesting that the Xigaze forearc was a possible source of Sangdanlin detritus by ca. 55 Ma. We propose a model in which the Xigaze forearc prograded south over the accretionary prism and onto the advancing Tethyan Himalayan passive margin between 58 and 54 Ma, during late stage evolution of the forearc basin and the beginning of collision with the Tethyan Himalaya. The lack of documented forearc strata younger than ca. 51 Ma suggests that sedimentation in the forearc basin ceased at this time owing to uplift resulting from continued continental collision.     

Formation and fragmentation of a late Miocene supradetachment basin in central Crete: implications for exhumation mechanisms of high‐pressure rocks in the Aegean forearc

We present a new lithostratigraphy and chronology for the Miocene on central Crete, in the Aegean forearc. Continuous sedimentation started at ～10.8 Ma in the E–W trending fluvio‐lacustrine Viannos Basin, formed on the hangingwall of the Cretan detachment, which separates high‐pressure (HP) metamorphic rocks from very low‐grade rocks in its hangingwall. Olistostromes including olistoliths deposited shortly before the Viannos Basin submerged into the marine Skinias Basin between 10.4 and 10.3 Ma testifies to significant nearby uplift. Uplift of the Skinias Basin between 9.7 and 9.6 Ma, followed by fragmentation along N–S and E–W striking normal faults, marks the onset of E–W arc‐parallel stretching superimposed on N–S regional Aegean extension. This process continued between 9.6 and 7.36 Ma, as manifested by tilting and subsidence of fault blocks with subsidence events centred at 9.6, 8.8, and 8.2 Ma. Wholesale subsidence of Crete occurred from 7.36 Ma until ～5 Ma, followed by Pliocene uplift and emergence. Subsidence of the Viannos Basin from 10.8 to 10.4 Ma was governed by motion along the Cretan detachment. Regional uplift at ～10.4 Ma, followed by the first reworking of HP rocks (10.4–10.3 Ma) is related to the opening and subsequent isostatic uplift of extensional windows exposing HP rocks. Activity of the Cretan detachment ceased sometime between formation of extensional windows around 10.4 Ma, and high‐angle normal faulting cross‐cutting the detachment at 9.6 Ma. The bulk of exhumation of the Cretan HP‐LT metamorphic rocks occurred between 24 and 12 Ma, before basin subsidence, and was associated with extreme thinning of the hangingwall (by factor ～10), in line with earlier inferences that the Cretan detachment can only explain a minor part of total exhumation. Previously proposed models of buyoant rise of the Cretan HP rocks along the subducting African slab provide an explanation for extension without basin subsidence.     

The response of a basin‐scale Miocene barrier reef system to long‐term,strong subsidence on a passive continental margin,Barcoo Sub‐basin,Australian North West Shelf

The Miocene sedimentary succession of the southern Browse Basin records the response of a tropical reef system to long‐term, strong subsidence on a passive continental margin. Geological interpretation of a comprehensive two‐dimensional (2D) seismic reflectivity data set documents for the first time the development of a continuous Miocene barrier reef on the Australian North West Shelf. With a length of over 250 km, this barrier reef is among the Earth's largest in the Neogene record. A sequence stratigraphic analysis tied to well data shows that the main controls for the evolution, growth and demise of the reef system were subsidence, third‐order global‐scale eustatic variations and antecedent topography. The generally very high Miocene subsidence rates estimated for the study area cannot be explained by typical passive‐margin subsidence controlled by lithospheric cooling and sedimentary loading alone. Additional dynamic subsidence induced by mantle convection, though documented as unusually large on the northern margin of Australia during the Neogene, can be also regarded as being of only minor importance. Therefore, accelerated tectonic subsidence related to the collision of the Australian and Eurasian Plates 250–500 km north of the study area seems to exert an important influence on reef development and demise, complicated by local tectonic inversion. The Miocene tectonic reactivation and inversion of an older structural grain is interpreted to have controlled the reef development considerably by providing localized topographic highs along transpressional anticlines above basement‐rooted faults that served as preferential sites for reef growth and retreat during times of rapidly rising sea level. This exemplarily shows that the far‐field effects of collision‐induced tectonic subsidence can significantly influence carbonate systems on passive margins.     

Late Cenozoic tectono‐stratigraphic sequences of the Crotone Basin: insights on the geodynamic history of the Calabrian arc and Tyrrhenian Sea

The Crotone Basin was generated in the late Cenozoic as a forearc basin of the Ionian arc‐trench system. New data are gained through detailed field mapping, high‐resolution stratigraphic analysis of a key area and examination of offshore well data and seismic reflection profiles. Major unconformities divide the basin fill into major sequences, which reveal a three‐stage internal organization thought to reflect geodynamic events of the Calabrian arc and backarc area closely. The first stage is characterized by extensional block faulting and uplift followed by rapid drowning during high subsidence and transtension in the basin along a major NNW‐ to NW‐striking fault system. This stage is interpreted to reflect resumption of rollback after an episode of slab tearing triggered by transitory docking of continental lithosphere in the trench. The initial uplift is inferred to reflect decoupling and rebound after the transitory coupling phase. The second stage is characterized by increased subsidence and continued extension/transtension. This trend presumably reflects a decreasing rate of rollback resulting from a tendency towards viscous coupling after acceleration of slab downwelling. The third stage is characterized by short‐lived transpression along major shear zones and local inversion of former basins. This is inferred to reflect entrance into the trench of buoyant continental lithosphere, resulting in significant deceleration of slab rollback and consequently a break in, or slowing of, backarc extension, and predominance of the effects of compression related to Africa–Europe convergence. Overall, the above evolution resulted in the formation of a progressively narrower and rapidly retreating slab, inducing extreme rates of backarc extension, and may have played a critical role in determining the intermittent nature of the backarc rifting.     

Post‐seafloor spreading magmatism and associated magmatic hydrothermal systems in the Xisha uplift region,northwestern South China Sea

Submarine magmatism and associated hydrothermal fluid flows has significant feedback influence on the petroleum geology of sedimentary basins. This study uses new seismic profiles and multibeam bathymetric data to examine the morphology and internal architecture of post‐seafloor spreading magmatic structures, especially volcanoes of the Xisha uplift, in extensive detail. We discover for the first time hydrothermal systems derived from magmatism in the northwestern South China Sea. Numerous solitary volcanoes and volcanic groups occur in the Xisha uplift and produce distinct seismic reflections together with plutons. Sills and other localized amplitude anomalies were fed by extrusions/intrusions and associated fluid flow through fractures and sedimentary layers that may act as conduits for magma and fluid flows transport. Hydrothermal structures such as pipes and pockmarks mainly occur in the proximity of volcanoes or accompany volcanic groups. Pipes, pockmarks and localized amplitude anomalies mainly constitute the magmatic hydrothermal systems, which are probably driven by post‐seafloor spreading volcanoes/plutons. The hydrothermal fluid flows released by magma degassing or/and related boiling of pore fluids/metamorphic dehydration reactions in sediments produced local overpressures, which drove upward flow of fluid or horizontal flow into the sediments or even seafloor. Results show that post‐seafloor spreading magmatic activity is more intense during a 5.5 Ma event than one in 2.6 Ma, whereas the hydrothermal activities are more active during 2.6 Ma than in 5.5 Ma. Our analysis indicates that post‐seafloor spreading magmatism may have a significant effect on hydrocarbon maturation and gas hydrate formation in the Xisha uplift and adjacent petroliferous basins. Consequently the study presented here improves our understanding of hydrocarbon exploration in the northwestern South China Sea.     

Why is there no Coastal Cordillera at the Arica Bend (Western Central Andes)?

The architecture of the Western Andes is remarkably constant between southern Peru and northern Chile. An exception, however, is present near Arica at 18°S, where the Andes change their strike direction by ca. 50° and the Coastal Cordillera is absent over an along‐strike width of 50 km. Although this feature has been mentioned in several previous studies, no effort has been made yet to describe and explain this peculiar morphology of the Western Central Andean forearc. Here, we propose a large‐scale model to explain the Myr‐long low uplift rate of the Arica Bend concerning seismic coupling and continental wedge‐top basin evolution. New geomorphic and sedimentologic data are integrated with seismicity and structural data from the literature to interpret the post‐Oligocene pattern of uplift, erosion and sediment transport to the trench. Results show that the Arica Bend has been marked by exceptionally low coastal uplift rates over post‐Oligocene timescales. In addition, this uplift anomaly at the Arica Bend correlates with relatively high sediment discharge to the corresponding trench segment since late Oligocene time. We interpret that before 25 Ma, the forming seaward concavity of the subduction zone induced trench‐parallel extension at the curvature apex of the overriding forearc. The subsequent low uplift rate would have then triggered a feedback mechanism, where the interplay between relatively low interplate friction, low coastal uplift and relatively high sediment discharge favoured Myr‐long relative subsidence at the Arica Bend, in contrast to Myr‐long uplift of the Coastal Cordillera north and south of it.     

Cretaceous evolution of the Andean margin between 36°S and 40°S latitude through a multi‐proxy provenance analysis of Neuquén Basin strata (Argentina)

During the Cretaceous, the Neuquén Basin transitioned from an extensional back‐arc to a retroarc foreland basin. We present a multi‐proxy provenance study of Aptian to Santonian (125–84 Ma) continental sedimentary rocks preserved in the Neuquén Basin used to resolve changes of sediment drainage pattern in response to the change in tectonic regime. Sandstone petrology and U–Pb detrital zircon geochronology constrain the source units delivering detritus to the basin; apatite U–Pb and fission track dating further resolve provenance and determine the age and patterns of exhumation of the source rocks. Sandstone provenance records a sharp change from a mixed orogenic source during Aptian time (ca. 125 Ma), to a magmatic arc provenance in the Cenomanian (ca. 100 Ma). We interpret this provenance change as the result of the drainage pattern reorganisation from divergent to convergent caused by tectonic basin inversion. During this inversion and early stages of contraction, a transient phase of uplift and basin erosion, possibly due to continental buckling, caused the pre‐Cenomanian unconformity dividing the Lower from Upper Cretaceous strata in the Neuquén Basin. This phase was followed by the development of a retroarc foreland basin characterised by a volcanic arc sediment provenance progressively shifting to a mixed continental basement provenance during Turonian‐Santonian (90–84). According to multi‐proxy provenance data and lag times derived from apatite fission track analysis, this trend is the result of a rapidly exhuming source within the Cordillera to the west, in response to active compressional tectonics along the western margin of South America, coupled with the increasing contribution of material from the stable craton to the east; this contribution is thought to be the result of the weak uplift and exhumation of the foreland due to eastward migration of the forebulge.     

Cenozoic evolution of the central Myanmar drainage system: insights from sediment provenance in the Minbu Sub‐Basin

Located at the southern edge of the eastern Himalayan syntaxis, the Central Myanmar Basin (CMB) is divided into several Tertiary sub‐basins that have been almost continuously filled since the Indo‐Asia collision. They are currently drained by the Irrawaddy River, which flows down the eastern Tibetan Plateau and the Sino‐Burman Ranges. Tracing sediment provenance from the CMB is thus critical for reconstructing the past denudation of the Himalayan‐Tibetan orogen; it is especially relevant since a popular drainage scenario involves the capture of the Tsangpo drainage system in Tibet by a precursor to the Irrawaddy River. Here, we document the provenance of sediment samples from the Minbu Sub‐Basin at the southern edge of the CMB, which is traversed by the modern stream of the Irrawaddy River. Samples ranging in age from middle Eocene to Pleistocene were investigated using Nd isotopes, trace element geochemistry and sandstone modal compositions. Our data provide no evidence of a dramatic provenance shift; however, sandstone petrography, trace element ratios and isotopic values display long‐term trends indicating a gradual decrease of the volcanic input and its replacement by a dominant supply from the Burmese basement. These trends are interpreted to reflect the progressive denudation of the Andean‐type volcanic arc that extended onto the Burmese margin, along the flank of the modern Sino‐Burman Ranges, where most of the post‐collisional deformation of central Myanmar is located. Though our results do not exclude an ephemeral or diluted contribution from a past Tsangpo‐Irrawaddy connection, sedimentation rates suggest that this hypothesis is unlikely before the development of a stable Tsangpo‐Brahmaputra River in the Miocene. These results thus suggest that the central Myanmar drainage basin has remained restricted to the Sino‐Burman Ranges since the beginning of the India‐Asia collision.     

Basin modelling of the Limón Back-arc Basin (Costa Rica): burial history and temperature evolution of an island arc-related basin-system

The Limón back‐arc basin belongs to the southern Central American arc‐trench system and is situated at the east coast of Costa Rica. The basin‐fill consists of Late Cretaceous to Pleistocene sedimentary rocks. A northern and a southern sub‐basin can be defined, separated by the E–W‐trending Trans Isthmic Fault System. The North Limón Basin is nearly undeformed, whereas the South Limón Basin is characterized by a fold‐and‐thrust belt. Both sub‐basins have a very similar sedimentary fill and can act as a natural laboratory for reconstructing controlling factors of arc‐related sedimentary basins as well as the influence of deformation on a basin system. Modelling focused on burial history and temperature evolution. Two‐dimensional simulations were carried out with the software PetroMod^®. The geohistory curve of the North Limón Basin is overall linear, indicating continuous subsidence. The South Limón Basin is also characterized by continuous subsidence, but rates strongly increased at the beginning of the Neogene. Despite a rapid Plio‐Pleistocene deformation of the fold‐and‐thrust belt, the present‐day temperature field is not disturbed in that area. The modelling results indicate a mean heat flow of 60 mW m^?2 for the North Limón Basin and 41 mW m^?2 for the South Limón Basin. These values are low compared with other back‐arc basins. The lower values are attributed to the following effects: (1) underlying basaltic crust, (2) the lack of an initial rift phase, (3) the low extension rates, (4) absence of volcanic activity and (5) insulation effects of a thick sediment pile. The reasons for the locally lower heat flow in the southern sub‐basin can be found in the low‐angle subduction of the Cocos Ridge. Owing to the low subduction angle, the cool fore‐arc mantle‐wedge below the island‐arc is pushed backwards increasing the cooled area.     

Experimental modelling of forearc basin development during accretionary wedge growth

We present results of three sand-box experiments that model the association between tectonic accretion and sedimentation in a forearc basin. Experimental sedimentation occurs step by step in the forearc basin during shortening of the sand wedge. In each experiment, the development of the accretionary wedge leads to the formation of a major backthrust zone. This major deformation zone accounts for the thickening in the rear part of the wedge. In natural settings this tectonic bulge dams sediments that are transported toward the trench from mountainous terrain behind the forearc. We test the variation of friction along the déollement and note the following: (1) shortening of a low-friction wedge involves a mechanical balance between forethrusts and backthrust propagation and this balance is recorded by the sedimentary sequence trapped in the forearc basin. Indeed, if most of the movement occurs along the backthrust, the deepening of the basin will be larger and consequently the thickness of the sedimentary sequence will be greater. (2) Such balance does not exist in the case of a high-friction wedge. (3) Variation of friction along the décollement during shortening of the sand wedge leads to modification in the forearc basin filling. Thus, for similar increments of convergence, the sequence deposited in the forearc basin shows relatively larger thickness when the wedge is shortened above a high-friction décollement. We suggest that contraction and thickening in the rear part of the wedge is an efficient mechanism to, initiate and develop a forearc basin. Thus, this kind of basin occurs in convergent settings, without collapse related to local extension or tectonic erosion. They represent a sedimentary trap on a passive basement, bounded by a tectonic bulge. The Quaternary Hikurangi forearc basin, southeast of the North Island of New Zealand, is bounded by two actively uplifting ridges. Thus, this basin is considered to be a possible example of the basins modelled in our experiments, and we suggest that the limit between the basin and the wedge could be a complex backthrust zone.     

Late Cretaceous‐Palaeogene stratigraphic and basin evolution in the Zhepure Mountain of southern Tibet: implications for the timing of India‐Asia initial collision

This article presents combined stratigraphic, sedimentological, subsidence and provenance data for the Cretaceous–Palaeogene succession from the Zhepure Mountain of southern Tibet. This region records the northernmost sedimentation of the Tethyan passive margin of India, and this time interval represents the transition into continental collision with Asia. The uppermost Cretaceous Zhepure Shanpo and Jidula formations record the transition from pelagic into upper slope to delta‐plain environments. The Palaeocene–lower Eocene Zongpu Formation records a carbonate ramp that is overlain by the deep‐water Enba Formation (lower Eocene). The upper part of the Enba Formation records shallowing into a storm‐influenced, outer shelf environment. Detrital zircon U–Pb and Hf isotopic data indicate that the terrigenous strata of the Enba Formation were sourced from the Lhasa terrane. Unconformably overlying the Enba Formation is the Zhaguo Formation comprising fluvial deposits with evidence of recycling from the underlying successions. Backstripped subsidence analysis indicates shallowing during latest Cretaceous‐earliest Palaeocene time (Zhepure Shanpo and Jidula formations) driven by basement uplift, followed by stability (Zongpu Formation) until early Eocene time (Enba Formation) when accelerated subsidence occurred. The provenance, subsidence and stratigraphy suggest that the Enba and Zhaguo formations record foredeep and wedge‐top sedimentation respectively within the early Himalayan foreland basin. The underlying Zongpu Formation is interpreted to record the accumulation of a carbonate ramp at the margin of a submarine forebulge. The precursor tectonic uplift during latest Cretaceous time could either record surface uplift over a mantle plume related to the Réunion hotspot, or an early signal of lithospheric flexure related to oceanic subduction, continental collision or ophiolite obduction. The results indicate that the collision of India with Asia occurred before late Danian (ca. 62 Ma) time.     

Intraplate subsidence and basin filling adjacent to an oceanic arc–continent collision: a case from the southern Caribbean‐South America plate margin

The upper Campanian–Lower Eocene synorogenic sedimentary wedge of the Ranchería Basin was deposited in an intraplate basin resting on a tilted continental crustal block that was deformed by collision and subsequent subduction of the Caribbean Plate. Upper Cretaceous–Lower Eocene strata rest unconformably upon Jurassic igneous rocks of the Santa Marta Massif, with no major thrust faults separating the Santa Marta Massif from the Ranchería Basin. The upper Campanian–Lower Eocene succession includes, from base to top: foraminifera‐rich calcareous mudstone, mixed carbonate–siliciclastic strata and mudstone, coal and immature fluvial sandstone beds. Diachronous collision and eastward tilting of the plate margin (Santa Marta Massif and Central Cordillera) favoured the generation of accommodation space in a continuous intraplate basin (Ranchería, Cesar and western Maracaibo) during the Maastrichtian to Late Palaeocene. Terrigenous detritus from the distal colliding margin filled the western segments of the continuous intraplate basin (Ranchería and Cesar Basins); in the Late Paleocene, continental depositional systems migrated eastwards as far as the western Maracaibo Basin. In Early Eocene time, reactivation of former extensional structures fragmented the intraplate basin into the Ranchería‐Cesar Basins to the west, and the western Maracaibo Basin and Palmar High to the East. This scenario of continent–oceanic arc collision, crustal‐scale tilting, intraplate basin generation and fault reactivation may apply for Upper Cretaceous–Palaeogene syntectonic basins in western Colombia and Ecuador, and should be considered in other settings where arc–continent collision is followed by subduction.     

Basin evolution of Upper Cretaceous–Lower Cenozoic strata in the Malargüe fold‐and‐thrust belt: northern Neuquén Basin,Argentina

The Andean Orogen is the type‐example of an active Cordilleran style margin with a long‐lived retroarc fold‐and‐thrust belt and foreland basin. Timing of initial shortening and foreland basin development in Argentina is diachronous along‐strike, with ages varying by 20–30 Myr. The Neuquén Basin (32°S to 40°S) contains a thick sedimentary sequence ranging in age from late Triassic to Cenozoic, which preserves a record of rift, back arc and foreland basin environments. As much of the primary evidence for initial uplift has been overprinted or covered by younger shortening and volcanic activity, basin strata provide the most complete record of early mountain building. Detailed sedimentology and new maximum depositional ages obtained from detrital zircon U–Pb analyses from the Malargüe fold‐and‐thrust belt (35°S) record a facies change between the marine evaporites of the Huitrín Formation (ca. 122 Ma) and the fluvial sandstones and conglomerates of the Diamante Formation (ca. 95 Ma). A 25–30 Myr unconformity between the Huitrín and Diamante formations represents the transition from post‐rift thermal subsidence to forebulge erosion during initial flexural loading related to crustal shortening and uplift along the magmatic arc to the west by at least 97 ± 2 Ma. This change in basin style is not marked by any significant difference in provenance and detrital zircon signature. A distinct change in detrital zircons, sandstone composition and palaeocurrent direction from west‐directed to east‐directed occurs instead in the middle Diamante Formation and may reflect the Late Cretaceous transition from forebulge derived sediment in the distal foredeep to proximal foredeep material derived from the thrust belt to the west. This change in palaeoflow represents the migration of the forebulge, and therefore, of the foreland basin system between 80 and 90 Ma in the Malargüe area.     

Sedimentary evidence for late Messinian uplift of the SE margin of the Central Anatolian Plateau: Adana Basin,southern Turkey

The Adana Basin of southern Turkey, located at the SE margin of the Central Anatolian Plateau in the vicinity of the Arabia‐Eurasia collision zone, is ideally suited to record Neogene and Quaternary topographic and tectonic changes in the easternmost Mediterranean realm. On the basis of our correlation of 34 seismic reflection profiles with corresponding exposed units along the margins of the Adana Basin, we identify and characterize the seismic facies that corresponds to the upper part of the Messinian Handere Formation (ca. 5.45 to 5.33 Ma), which consists mainly of fluvial conglomerates and marls. The seismic reflection profiles indicate that ca. 1100 km³ of the Handere Formation upper sub‐unit is distributed over ca. 3000 km², reflecting local sedimentation rates of up to 12.5 mm year^?1. This indicates a major increase in both sediment supply and subsidence rates at ca. 5.45 Ma. Our provenance analysis of the Handere Formation upper sub‐unit based on clast counting and palaeocurrent measurements reveals that most of the sediment is derived from the Taurus Mountains at the SE margin of the Central Anatolian Plateau and regions farther north. A comparison of these results with the composition of recent fluvial conglomerates and the present‐day drainage basins indicates major changes between late Messinian and present‐day source areas. We suggest that these changes in drainage patterns and lithological characteristics result from uplift and ensuing erosion of the SE margin of the plateau. We interpret the tectonic evolution of the southern flank of the Anatolian Plateau and the coeval subsidence and sedimentation in the Adana Basin to be related to deep lithospheric processes, particularly lithospheric delamination and slab break‐off.