Extension and subsidence of the Pearl River Mouth Basin, northern South China Sea

Abstract The uniform stretching model has been applied to seismic reflection profiles and well-log information from the Pearl River Mouth Basin on the northern flank of the South China Sea. Stretching factors were calculated from subsidence curves determined from the stratigraphy by using the backstripping technique to remove the effects of compaction and sediment loading. Variations in rift topography, palaeobathymetry and global sea-level v/ere taken into account. We argue that the Pearl River Mouth Basin formed by lithospheric extension by a factor of about 1.8, lasting from Late Cretaceous to late Oligocene times. Stretching factors calculated from subsidence agree with those determined from the geometry of normal faulting and from crustal thinning. Thus there is no indication of a significant discrepancy between the different estimates of stretching. The geometry of faulting suggests that considerable amounts of local footwall uplift occurred during the rifting period. Small differences between the observed and calculated subsidence curves (∽ 400 m in the middle Miocene) are best explained by minor amounts of extension ( β ∽ 1.1). The time-temperature history of sediments within the basin has also been calculated so that expected vitrinite reflectance and oil abundance could be determined. The results are consistent with each other and are in reasonable agreement with observations from wells.     

Clinoform growth and sediment flux into late Cenozoic Qiongdongnan shelf margin,South China Sea

The South China Sea continental margin in the Qiongdongnan Basin (QDNB) area has incrementally prograded since 10.5 Ma generating a margin sediment prism more than 4km-thick and 150–200 km wide above the well-dated T40 stratigraphic surface. Core and well log data, as well as clinoform morphology and growth patterns along 28 2D seismic reflection lines, illustrate the evolving architecture and margin morphology; through five main seismic-stratigraphic surfaces (T40, T30, T27, T20 and T0) frame 15 clinothems in the southwest that reduce over some 200 km to 8 clinoforms in the northeast. The overall margin geometry shows a remarkable change from sigmoidal, strongly progradational and aggradational in the west to weakly progradational in the east. Vertical sediment accumulation rate increased significantly across the entire margin after 2.4 Ma, with a marked increase in mud content in the succession. Furthermore, an estimate of sediment flux across successive clinoforms on each of the three selected seismic cross sections indicate an overall decrease in sediment discharge west to east, away from the Red River depocenter, as well as a decrease in the percentage of total discharge crossing the shelf break in this same direction. The QDNB Late Cenozoic continental margin growth, with its overall increased sediment flux, responded to the climate-induced, gradual cooling and falling global sea level during this icehouse period.     

Cenozoic stratigraphy and subsidence history of the South China Sea margin in the Taiwan region

Seismic reflection profiles and well data are used to determine the Cenozoic stratigraphic and tectonic development of the northern margin of the South China Sea. In the Taiwan region, this margin evolved from a Palaeogene rift to a latest Miocene–Recent foreland basin. This evolution is related to the opening of the South China Sea and its subsequent partial closure by the Taiwan orogeny. Seismic data, together with the subsidence analysis of deep wells, show that during rifting (～58–37 Ma), lithospheric extension occurred simultaneously in discrete rift belts. These belts form a >200 km wide rift zone and are associated with a stretching factor, β, in the range ～1.4–1.6. By ～37 Ma, the focus of rifting shifted to the present‐day continent–ocean boundary off southern Taiwan, which led to continental rupture and initial seafloor spreading of the South China Sea at ～30 Ma. Intense rifting during the rift–drift transition (～37–30 Ma) may have induced a transient, small‐scale mantle convection beneath the rift. The coeval crustal uplift (Oligocene uplift) of the previously rifted margin, which led to erosion and development of the breakup unconformity, was most likely caused by the induced convection. Oligocene uplift was followed by rapid, early post‐breakup subsidence (～30–18 Ma) possibly as the inferred induced convection abated following initial seafloor spreading. Rapid subsidence of the inner margin is interpreted as thermally controlled subsidence, whereas rapid subsidence in the outer shelf of the outer margin was accompanied by fault activity during the interval ～30–21 Ma. This extension in the outer margin (β～1.5) is manifested in the Tainan Basin, which formed on top of the deeply eroded Mesozoic basement. During the interval ～21–12.5 Ma, the entire margin experienced broad thermal subsidence. It was not until ～12.5 Ma that rifting resumed, being especially active in the Tainan Basin (β～1.1). Rifting ceased at ～6.5 Ma due to the orogeny caused by the overthrusting of the Luzon volcanic arc. The Taiwan orogeny created a foreland basin by loading and flexing the underlying rifted margin. The foreland flexure inherited the mechanical and thermal properties of the underlying rifted margin, thereby dividing the basin into north and south segments. The north segment developed on a lithosphere where the major rift/thermal event occurred ～58–30 Ma, and this segment shows minor normal faulting related to lithospheric flexure. In contrast, the south segment developed on a lithosphere, which experienced two more recent rift/thermal events during ～30–21 and ～12.5–6.5 Ma. The basal foreland surface of the south segment is highly faulted, especially along the previous northern rifted flank, thereby creating a deeper foreland flexure that trends obliquely to the strike of the orogen.     

Models of the rapid post‐rift subsidence in the eastern Qiongdongnan Basin,South China Sea: implications for the development of the deep thermal anomaly

The Qiongdongnan Basin is one of the largest Cenozoic rifted basins on the northern passive margin of the South China Sea. It is well known that since the Late Miocene, approximately 10 Ma after the end of the syn‐rift phase, this basin has exhibited rapid thermal subsidence. However, detailed analysis reveals a two‐stage anomalous subsidence feature of the syn‐rift subsidence deficit and the well‐known rapid post‐rift subsidence after 10.5 Ma. Heat‐flow data show that heat flow in the central depression zone is 70–105 mW m^?2, considerably higher than the heat flow (<70 mW m^?2) on the northern shelf. In particular, there is a NE‐trending high heat‐flow zone of >85 mW m^?2 in the eastern basin. We used a numerical model of coupled geothermal processes, lithosphere thinning and depositional processes to analyse the origin of the anomalous subsidence pattern. Numerical analysis of different cases shows that the stretching factor β_s based on syn‐rift sequences is less than the observed crustal stretching factor β_c, and if the lithosphere is thinned with β_c during the syn‐rift phase (before 21 Ma), the present basement depth can be predicted fairly accurately. Further analysis does not support crustal thinning after 21 Ma, which indicates that the syn‐rift subsidence is in deficit compared with the predicted subsidence with the crustal stretching factor β_c. The observed high heat flow in the central depression zone is caused by the heating of magmatic injection equivalently at approximately 3–5 Ma, which affected the eastern basin more than the western basin, and the Neogene magmatism might be fed by the deep thermal anomaly. Our results suggest that the causes of the syn‐rift subsidence deficit and rapid post‐rift subsidence might be related. The syn‐rift subsidence deficit might be caused by the dynamic support of the influx of warmer asthenosphere material and a small‐scale thermal upwelling beneath the study area, which might have been persisting for about 10 Ma during the early post‐rift phase, and the post‐rift rapid subsidence might be the result of losing the dynamic support with the decaying or moving away of the deep thermal source, and the rapid cooling of the asthenosphere. We concluded that the excess post‐rift subsidence occurs to compensate for the syn‐rift subsidence deficit, and the deep thermal anomaly might have affected the eastern Qiongdongnan Basin since the Late Oligocene.     

Causes of spatially variable tectonic subsidence in the Miocene Bermejo Foreland Basin, Argentina

ABSTRACT Tectonic subsidence in the 20–9 Ma Bermejo basin resulted from spatially variable crustal loading on a lithosphere of spatially variable strength (e.g. elastic thickness). Reconstruction of the crustal loads added between 20 and 9 Ma, and assessment of the effects of these loads on an elastic, isotropic lithosphere confirm this hypothesis. Elastic models effectively explain tectonic subsidence east of the Iglesia–Calingasta basin, but west of it crustal loads were locally compensated. Elastic models also prove that the 20–9 Ma Frontal Cordillera loading is of no importance in the mechanical system of the Bermejo basin. 2D and 3D elastic models of a uniformly strong lithosphere under 20–9 Ma crustal loads corrected for post‐9 Ma erosion successfully replicate the 9 Ma Bermejo basin's proximal palaeotopography. However, they fail to replicate the 9 Ma basin's medial and distal palaeotopography. A 3D finite element model of a lithosphere with bimodal strength (weak below the Bermejo basin and west of the Precordillera, and strong below the Precordillera and east of the Valle Fértil lineament) successfully replicates the 9 Ma basin's palaeotopography. That variable strength model introduces a southward decrease in the wavelength of flexural deformation, which results in a basin that narrows southward, consistent with the 9 Ma Bermejo basin. The preferred 9 Ma lithospheric strength distribution is similar to the present lithospheric strength field derived from gravity data, suggesting that the bimodal strength signature was retained throughout the entire basin's evolution. Late Miocene flattening of the subducting slab, tectonic change to a broken foreland, or deposition of a thick (～8–10 km) sedimentary cover did not affect the strength of the lithosphere underlying the Bermejo basin. The long‐term bimodal strength field does not correlate with the documented thickness of the seismogenic crust.     

Focused fluid flow systems of the Zhongjiannan Basin and Guangle Uplift,South China Sea

In this article, we document a large number of focused fluid escape structures using high quality 2D seismic reflection data and multibeam bathymetry data from a poorly known area at the intersection of the northern South China Sea (SCS) and the western SCS. Three types of focused fluid escape systems are identified and described: mud volcanoes, pipes and associated pockmarks. The mud volcanoes occur singly or as clustered groups. The overpressure driving the mud volcanism is argued herein to be related to the generation of thermogenic hydrocarbons. The clustered distributions are related to localized tectonic uplift in the basin. Pipes mainly occur within the Guangle Uplift or accompany the mud volcano clusters. The pipes located within the Guangle Uplift are attributed to carbonate dissolution caused by hydrothermal fluids. Fluids ascended through these structures and were expelled at the palaeo‐seabed or present seabed forming palaeo‐pockmarks and present‐day pockmarks. Some ‘mega‐pockmarks’ show evidence of enlargement due to bottom currents. The marginal basins of the SCS are petroliferous, with attention gradually shifting to the deep‐water area. Our results show that fluid migration must be taken into account when assessing seabed stability. This analysis also improves our understanding the petroleum geology in the study area, and is also useful for predicating where chemosynthetic ecosystems may be located.     

Sequence architecture and depositional evolution of the northern continental slope of the South China Sea: responses to tectonic processes and changes in sea level

The continental slopes of the South China Sea (SCS), the largest marginal sea on the continental shelf of Southeast Asia, are among the most significant shelf‐margin basins in the world because of their abundant petroleum resources and a developmental history related to sea floor spreading since Late Oligocene time. Based on integrated analyses of seismic, well‐logging and core data, we systematically document the sequence architecture and depositional evolution of the northern continental slope of the SCS and reveal its responses to tectonism, sea‐level change and sediment supply. The infill of this shelf‐margin basin can be divided into seven composite sequences (CS1–CS7) that are bounded by regional unconformities. Composite sequences CS3 to CS7 have formed since Late Oligocene time, and each of them generally reflects a regional transgressive–regressive cycle. These large cycles can be further divided into 20 sequences that are defined by local unconformities or transgressive–regressive boundaries. Depositional–geomorphological systems represented on the continental slope mainly include shelf‐edge deltas, prodelta‐slope fans, clinoforms of the shelf‐margin slope, unidirectionally migrating slope channels, incised slope valleys, muddy slope fans, slope slump‐debris‐flow complexes and large‐scale soft‐sediment deformation of bedding. Changing sea levels, reflected by evidence from sequence architecture in the study area, are generally comparable with those of the Haq (1987) global sea level curve, whereas the regional transgressions and regressions were apparently controlled by tectonic uplift and subsidence. Composite sequences CS3 and CS4 formed from Late Oligocene to Middle Miocene time and represent continental‐slope deposition during a time of northwest‐northeast seafloor spreading and subsequent development of sub‐basins in the southwest‐central SCS. The development of composite sequences CS5 to CS7 after Middle Miocene time was obviously influenced by the Dongsha Movement during convergence between the SCS and Philippine Sea plates. Climatic variations and monsoon intensification may have enhanced sediment supply during Late Oligocene‒Early Miocene (25–21 Ma) and Late Pliocene‒Pleistocene (3–0.8 Ma) times. This study indicates that shelf‐edge delta and associated slope fan systems are the most important oil/gas‐bearing reservoirs in the SCS continental‐slope area.     

The Miocene Saint-Florent Basin in northern Corsica: stratigraphy, sedimentology, and tectonic implications

Late early–early middle Miocene (Burdigalian–Langhian) time on the island of Corsica (western Mediterranean) was characterized by a combination of (i) postcollisional structural inversion of the main boundary thrust system between the Alpine orogenic wedge and the foreland, (ii) eustatic sealevel rise and (iii) subsidence related to the development of the Ligurian‐Provençal basin. These processes created the accommodation for a distinctive continental to shallow‐marine sedimentary succession along narrow and elongated basins. Much of these deposits have been eroded and presently only a few scattered outcrop areas remain, most notably at Saint‐Florent and Francardo. The Burdigalian–Langhian sedimentary succession at Saint‐Florent is composed of three distinguishing detrital components: (i) siliciclastic detritus derived from erosion of the nearby Alpine orogenic wedge, (ii) carbonate intrabasinal detritus (bioclasts of shallow‐marine and pelagic organisms), and (iii) siliciclastic detritus derived from Hercynian‐age foreland terraines. The basal deposits (Fium Albino Formation) are fluvial and composed of Alpine‐derived detritus, with subordinate foreland‐derived volcanic detritus. All three detrital components are present in the middle portion of the succession (Torra and Monte Sant'Angelo Formations), which is characterized by thin transitional deposits evolving vertically into fully marine deposits, although the carbonate intrabasinal component is predominant. The Monte Sant'Angelo Formation is characteristically dominated by the deposits of large gravel and sandwaves, possibly the result of current amplification in narrow seaways that developed between the foreland and the tectonically collapsing Alpine orogenic wedge. The laterally equivalent Saint‐Florent conglomerate is composed of clasts derived from the late Permian Cinto volcanic district within the foreland. The uppermost unit (Farinole Formation) is dominated by bioclasts of pelagic organisms. The Saint‐Florent succession was deposited during the last phase of the counterclockwise rotation of the Corsica–Sardinia–Calabria continental block and the resulting development of the Provençal oceanic basin. The succession sits at the paleogeographic boundary between the Alpine orogenic wedge (to the east), its foreland (to the west), and the Ligurian‐Provençal basin (to the northwest). Abrupt compositional changes in the succession resulted from the complex, varying interplay of post‐collisional extensional tectonism, eustacy and competing drainage systems.     

Reconstruction of the Cenozoic deformation of the Bohai Bay Basin,North China

A well‐constrained plate deformation model may lead to an improved understanding of sedimentary basin formation and the connection between subduction history and over‐riding plate deformation. Building quantitative models of basin kinematics and deformation remains challenging often due to the lack of comprehensive constraints. The Bohai Bay Basin (BBB) is an important manifestation of the destruction of the North China Craton, and records the plate kinematic history of East Asia during the Cenozoic. Although a number of interpretations of the formation of the BBB have been proposed, few quantitative basin reconstruction models have been built to test and refine previous ideas. Here, we developed a quantitative deformation reconstruction of the BBB constrained with balanced cross‐sections and structural, stratigraphic and depositional age data. Our reconstruction suggests that the basin formation process was composed of three main stages: Paleocene‐early Eocene (65–42 Ma) extension initiation, middle Eocene‐early Oligocene (42–32.8 Ma) extension climax and post‐Oligocene (32.8–0 Ma) post‐extensional subsidence. The deformation of the BBB is spatially heterogeneous, and its velocity directions rotated clockwise during the basin formation process. The reconstruction supports the interpretation that the BBB formed via strike‐slip faulting and orthogonal extension and that the basin is classified as a composite extensional‐transtensional basin. We argue that the clockwise rotation of the basin velocity field was driven by the counter‐clockwise rotation in the direction of Pacific Plate subduction. The kinematics of the BBB imply that the Pacific Plate may have been sufficiently coupled to the over‐riding East Asian Plate during the critical period of Pacific Plate reorganization. The new reconstruction provides a quantitative basis for studies of deformation processes not only in the vicinity of the BBB, but also more broadly throughout East Asia.     

Uplift, exhumation and precipitation: tectonic and climatic control of Late Cenozoic landscape evolution in the northern Sierras Pampeanas, Argentina

Deciphering the evolution of mountain belts requires information on the temporal history of both topographic growth and erosion. The exhumation rate of a mountain range undergoing shortening is related to the erodability of the uplifting range as well as the efficiency of erosion, which partly depends on the available precipitation. Young, rapidly deposited sediments have low thermal conductivity and are readily eroded, in contrast to underlying resistant basement rocks that have a higher thermal conductivity. Apatite fission‐track thermochronology can quantify cooling; thermal models constrain the relationship between this cooling and exhumation. By utilizing geological relations for a datum, we can examine the evolution of rock uplift, surface uplift and exhumation. In the northern Sierras Pampeanas of Argentina, a young sedimentary basin that overlay resistant crystalline basement prior to rapid exhumation provides an ideal setting to examine the effect of contrasting thermal and erosional regimes. There, tectonically active reverse‐fault‐bounded blocks partly preserve a basement peneplain at elevations in excess of 4500 m. Prior to exhumation, the two study areas were covered by 1000 and 1600 m of recently deposited sediments; this sequence begins with shallow marine deposits immediately overlying the regional erosion surface. Apatite fission‐track data were obtained from vertical transects in the Calchaquíes and Aconquija ranges. At Cumbres Calchaquíes, erosion leading to the development of the peneplain commenced in the Cretaceous, probably as a result of rift‐shoulder uplift. In contrast, Sierra Aconquija cooled rapidly between 5.5 and 4.5 Myr. At the onset of this rapid exhumation, the sediment was quickly removed, causing fast cooling, but relatively slow rates of surface uplift. Syntectonic conglomerates were produced when faulting exposed resistant bedrock; this change in rock erodability led to enhanced surface uplift rates, but decreased exhumation rates. The creation of an orographic barrier after the range had attained sufficient elevation further decreased exhumation rates and increased surface uplift rates. Differences in the magnitude of exhumation at the two transects are related to both differences in the thickness of the sedimentary basin prior to exhumation and differences in the effective precipitation due to an orographic barrier in the foreland and hence differences in the magnitude of headward erosion.     

Holocene diatom stratigraphy in the Archipelago Sea,northern Baltic Sea

Two sediment cores from the Archipelago Sea in the northern Baltic Sea were examined for their siliceous microfossils in order to study the Holocene palaeoenvironmental history of the area. The diatom record was divided into local diatom assemblage zones (LDAZ). An age model was constructed using independent palaeomagnetic and AMS-¹⁴C methods. The early history of the Archipelago Sea was freshwater. Initial brackish-water influence is observed at 7,950 ± 80 cal. BP (LDAZ4), but fully brackish conditions were established at 7,700 ± 80 cal. BP (LDAZ5). Diatom assemblages indicate increasing salinity, warming climate, and possible increasing trophic state during the transition from lacustrine to brackish-water conditions. The decreasing abundance of Pseudosolenia calcar-avis (Schultze) Sundström and the increasing abundance of the ice-cover indicator species Pauliella taeniata (Grunow) Round and Basson indicate reduced salinity and climatic cooling after ～5,000 cal. BP. LDAZ boundaries do not always correlate with changes in the sediment appearance, which underlines the importance of defining biostratigraphic boundaries independently to the sediment visual character, in contrast with the conventional practice for classifying the Baltic Sea sediments.     

Extensional tectonic regimes in the Aegean basins during the Cenozoic

Abstract Kinematics of faults in the Northern Aegean show three extensional tectonic regimes the tensional directions of which trend (1) WNW-ESE, (2) NE-SW and (3) N-S. These were active during the Upper Miocene, Pliocene-Lower Pleistocene and Mid Pleistocene-Present day, respectively. The main characteristics of the stress patterns (1) and (2) on the overall Aegean is tentatively explained by variations of the horizontal lithospheric stress value σ_zz due to the slab push and of the vertical lithospheric stress value σ_zz due to mass heterogeneities. During the Mid Pleistocene-Present, due to the slab push, tectonics were compressional along the arc boundary: σ_zz was σ1. In the Aegean basins, tectonics were extensional, c_2Z was σ1 as a consequence of the thickness of the continental crust and, possibly of an updoming asthenosphere; thus σ_zz became σ2, allowing tension σ3 to be orthogonal to the compression along the arc, i.e. to be roughly parallel to the arc trend. During the Pliocene-Lower Pleistocene, the extensional regime was distinctly different. The tensional directions were roughly radial to the arc. It is suggested that σ_zz was weakly compressional, or eventually tensional, due a seaward migration of the slab so that σ_zz became σ3. In the Northern Aegean, the stress pattern has been also controlled by the westward push of the Anatolian landmass. During the Mid Pleistocene-Present day, this was typically extensional (al was vertical) and the right lateral strike-slip motion on the North Anatolian Fault transformed into a N-S-stretching, E-W-shortening of the Northern Aegean. Dextral strike-slip motions along the North Aegean Trough fault zone were possible on NE-SW-striking faults. During the Pliocene-Lower Pleistocene, normal fault components were higher; however, because the angle between the NE-SW trend of the tensional axis and the strike of the fault zone was acute, dextral strike-slip components were possible on all the faults striking NE-SW to E-W. A clockwise 15^o rotation of Limnos with respect to Samothraki, Thraki and Thassos, suggested by structural data, was probably associated with these dextral motions. The WNW-ESE trending tension during the Upper Miocene indicates that the dextral North Anatolian Fault had not yet merged into the North Aegean Trough fault zone at that time. We propose that the formation of Aegean basins during the Cenozoic was related to the activity of two major Hellenic arcs. The ‘Pelagonian-Pindic Arc’ resulted in the formation of the subsident Aegean basins of Middle Eocene-Lower Miocene age and of the older Northern Aegean orogenic volcanism. The ‘Aegean Arc’ resulted in the formation of the subsident Aegean basins of Middle Miocene to Present day age and of the Southern Aegean orogenic volcanism. Were these arcs associated with a unique subduction zone or with two such zones ? In the first case, the slab is no more than 16 Myr old, in the second it may be as old as 45–50 Myr. The answer depends on the accuracy of the seismic tomography profiles.     

Basin tectonic history and paleo‐physiography of the pelagian platform,northern Tunisia,using vitrinite reflectance data

Constraining the thermal, burial and uplift/exhumation history of sedimentary basins is crucial in the understanding of upper crustal strain evolution and also has implications for understanding the nature and timing of hydrocarbon maturation and migration. In this study, we use Vitrinite Reflectance (VR) data to elucidate the paleo‐physiography and thermal history of an inverted basin in the foreland of the Atlasic orogeny in Northern Tunisia. In doing so, it is the primary aim of this study to demonstrate how VR techniques may be applied to unravel basin subsidence/uplift history of structural domains and provide valuable insights into the kinematic evolution of sedimentary basins. VR measurements of both the onshore Pelagian Platform and the Tunisian Furrow in Northern Tunisia are used to impose constraints on the deformation history of a long‐lived structural feature in the studied region, namely the Zaghouan Fault. Previous work has shown that this fault was active as an extensional structure in Lower Jurassic to Aptian times, before subsequently being inverted during the Late Cretaceous Eocene Atlas I tectonic event and Upper Miocene Atlas II tectonic event. Quantifying and constraining this latter inversion stage, and shedding light on the roles of structural inheritance and the basin thermal history, are secondary aims of this study. The results of this study show that the Atlas II WNW‐ESE compressive event deformed both the Pelagian Platform and the Tunisian Furrow during Tortonian‐Messinian times. Maximum burial depth for the Pelagian Platform was reached during the Middle to Upper Miocene, i.e. prior to the Atlas II folding event. VR measurements indicate that the Cretaceous to Ypresian section of the Pelagian Platform was buried to a maximum burial depth of ~3 km, using a geothermal gradient of 30°C/km. Cretaceous rock samples VR values show that the hanging wall of the Zaghouan Fault was buried to a maximum depth of <2 km. This suggests that a vertical km‐scale throw along the Zaghouan Fault pre‐dated the Atlas II shortening, and also proves that the fault controlled the subsidence of the Pelagian Platform during the Oligo‐Miocene. Mean exhumation rates of the Pelagian Platform throughout the Messinian to Quaternary were in the order of 0.3 mm/year. However, when the additional effect of Tortonian‐Messinian folding is accounted for, exhumation rates could have reached 0.6–0.7 mm/year.     

南海地缘战略逻辑演进与南海命运共同体建构

南海因其所具有的重要地缘政治与经济战略地位而成为大国竞相角逐之地。然而,在一个相互依赖的时代,南海地缘战略并非只是地缘政治冲突的单一逻辑,而是迈向政治与经济、文化交织、竞争与合作并存的复合逻辑状态。南海周边国家经贸互补性大于竞争性,已经形成互赖的地缘经济格局,但是南海地缘经济合作存在的制度重叠、制度竞争与制度过剩仍暴露了地缘经济中的竞争逻辑。“一带一路”作为新型区域合作平台,有助于超越传统地缘经济竞争逻辑。东亚意识的产生、南海地缘政治经济互赖以及南海制度规范的建立使得南海地缘文化在多元文化互动中迈向共同体逻辑。建构融安全、利益以及信任为一体的南海命运共同体,需要通过对话协商自主制定地区规则、加强南海地区功能性合作、通过多轨外交增进地区互信,使南海成为“友好、和平、合作”之海。     

Characteristics of high arsenic groundwater in Hetao Basin, Inner Mongolia, northern China

It is well known that the Hetao Basin is one of the most seriously arsenic-affected groundwater areas in China. In order to understand the characteristics of high arsenic(As) groundwater in the Basin, a brief overview of arsenic in groundwater follows. High arsenic in the Basin commonly occurs in shallow groundwater and the total arsenic concentrations range from 0.58 to 572 μg/L(average 99.73 μg/L), exceeding the maximum mandated value of 10 μg/L for drinking water in China; As(Ш) is the predominant species. The regional distribution pattern of arsenic in the groundwater increases from south/southeast to north/northwest. Hangjinhouqi and Wuyuan counties are considered as the most seriously affected areas, with high incidences of endemic arsenicosic diseases in the Hetao Basin. High groundwater arsenic correlates with the increase of well depth. Previous studies proposed that groundwater arsenic in the Basin is mainly originated from desorption of some natural solid materials in the sediments, under reducing condition. Generally, reducing condition is believed to be the primary factor for arsenic releasing from the sediment to groundwater in the region. Under inorganic or bacterial processes, Fe2O3 changes to Fe S and arsenic adsorbed to Fe(OH)3 dissolves into groundwater, and As(V) is reduced to As(Ш). Besides, reducing environments, groundwater hydraulic gradients, organic matter, p H, evapotranspiration, and soil texture are presumed to be the predominant factors that control arsenic mobilization.     

Initiation and evolution of fault-controlled slope-parallel submarine channels: Miocene eastern slope of Yinggehai Basin,South China Sea

Submarine channels act as the main conduits for the transport of sediment to deep-water basins by sediment gravity flows. The interplay between fault-related deformation and the initiation and development of the channels is poorly known. Here, we present the identification, formation and evolution of the Miocene slope-parallel channel by employing 3D seismic reflection, wireline-log and core data in the eastern slope of Yinggehai Basin, South China Sea. Based on the lengths and plan-view shapes, a total of three different types of fault-associated slope-parallel depressions have been identified. The depressions were formed in the fault zone and controlled by the reactivation of the underlying older faults. Among them, Type-1 depressions are short (<20 km) oval or circle shaped possessing only one depocenter. Type-2 depressions are elongated (25–70 km), and usually have multiple depocenters. Type-3 depressions, which are usually connected by slope-perpendicular channels in the head and middle, are longer (more than 190 km) and connect shallow and deep-water basins. The analysis of morphology, erosivity and material transport shows that Type-3 depressions are fully fledged channels. Type-1 and Type-2 depressions are channel precursors representing the initial stage of channel evolution. With this motive, a model for the initiation and evolution of slope-parallel submarine channels controlled by strike-slip-extensional faults is presented. Unlike the previous investigations which suggest that erosion takes place at the inception of submarine channel formation, the fault-controlled slope-parallel channel is mainly controlled by faulting and has no initial erosive base and does not develop levees. The depressions are extended and elongated by the continuous fault activity. It was not until the slope-parallel depression connected with large-scale slope-perpendicular channels transporting materials into the depression via erosive turbidity currents that it evolved into a channel-levee system. This study is of global importance for understanding submarine channel generation and evolution since the fault-controlled slope-parallel channels have been found in tectonic active basins worldwide.     

南海珊瑚礁经济价值评估

根据已有的基础数据、国外文献资料及野外调查资料,利用生产效益法和数值转移法估算南海珊瑚礁的经济价值（包括渔业经济价值、海岸保护价值、旅游休闲价值、生物多样性价值）以及由于过度捕捞、破坏性捕捞和陆源沉积物污染而造成其经济价值的损失。结果显示：南海珊瑚礁年经济价值为156.5亿元,其中渔业价值占90%,为140.4亿元;其次是海岸保护价值,占5.5%,为8.7亿元;而旅游休闲价值和生物多样性价值分别为5.3亿元和2.1亿元。珊瑚礁如果维持可持续利用的状态,并考虑10%的贴现率,未来20 a珊瑚礁总的经济价值为1 370亿元。由于南海珊瑚礁面临最大的威胁是人类不合理的利用,其对今后20 a珊瑚礁带来的经济损失是258.8亿元,其中因破坏性捕捞造成的损失为249.6亿元,占总经济价值损失的96.4%,而因过度性捕捞和陆源沉积物造成的经济损失分别是3.3亿元和5.9亿元。人类干扰对今后20 a南海珊瑚礁造成的经济价值损失占未来20 a南海珊瑚礁总经济价值的18.98%。