Pleistocene tectonics inferred from fluvial terraces of the northern Upper Rhine Graben, Germany

This study of fluvial terraces of the River Rhine and tributaries aims to search for indications of Pleistocene tectonic activity. The study area includes the northern Upper Rhine Graben (URG), the Mainz Basin and the adjacent Rhenish Massif with the Middle Rhine Valley. High rates of Quaternary surface processes, large amount of human modifications, relatively slow tectonic deformation and presently low intra-plate seismic activity characterize this area. Therefore, the records of relatively slow tectonic deformation are less well preserved and thus difficult to detect. This study uses the relative position of fluvial terraces to determine the more local effects of fault movements on the terraces and to evaluate their displacement rates and patterns. The research is based on a review of previous terrace studies and new terrace mapping from the eastern Mainz Basin and the bordering URG using topographic map interpretations and field observations. This newly mapped sequence of terrace surfaces can be correlated to other terraces in the vicinity on the basis of relative height levels. Terrace correlation between the western Mainz Basin and Middle Rhine Valley relies on a single chronostratigraphic unit (Mosbach sands) and additional relative height correlations. This is the first study to present a continuous correlation of terraces from the western margin of the URG to the Rhenish Massif and enables the study of the transition from the subsiding graben to the uplifted Rhenish Massif. By means of a longitudinal profile, which ranges from the URG to the Rhenish Massif, the influence of individual fault movements on the terrace levels and the large-scale regional uplift is demonstrated. It is evident from the profile that the uplift of Early to Middle Pleistocene terraces increases northwards, towards the Rhenish Massif. The uplift was diachronic, with a significant pulse occurring first in the northern URG (Lower Pleistocene) and later in the Rhenish Massif (Middle Pleistocene). The largest vertical displacements are recorded for the boundary fault separating the Mainz Basin and the Rhenish Massif (Hunsrück–Taunus Boundary Fault) and for faults bounding the northeastern Mainz Basin. The motions and displacement rates calculated for individual faults indicate deformation rates in the order of 0.01–0.08 mm/year. At this stage, the calculation of displacement rates depends mostly on a single dated stratigraphic unit. Additional dating of terrace deposits is urgently needed to better constrain the temporal development of the terrace sequence and the impact of tectonic movements.     

Late Pleistocene fluvial dynamics in the Hochrhein Valley and in the Upper Rhine Graben: chronological frame

During the Pleistocene, the Rhine glacier system acted as a major south–north erosion and transport medium from the Swiss Alps into the Upper Rhine Graben, which has been the main sediment sink forming low angle debris fans. Only some aggradation resulted in the formation of terraces. Optically stimulated luminescence (OSL) and radiocarbon dating have been applied to set up a more reliable chronological frame of Late Pleistocene and Holocene fluvial activity in the western Hochrhein Valley and in the southern part of the Upper Rhine Graben. The stratigraphically oldest deposits exposed, a braided-river facies, yielded OSL age estimates ranging from 59.6 ± 6.2 to 33.1 ± 3.0 ka. The data set does not enable to distinguish between a linear age increase triggered by a continuous autocyclical aggradation or two (or more) age clusters, for example around 35 ka and around 55 ka, triggered by climate change, including stadial and interstadial periods (sensu Dansgaard–Oeschger cycles). The braided river facies is discontinuously (hiatus) covered by coarse-grained gravel-rich sediments deposited most likely during a single event or short-time period of major melt water discharge postdating the Last Glacial Maximum. OSL age estimates of fluvial and aeolian sediments from the above coarse-grained sediment layer are between 16.4 ± 0.8 and 10.6 ± 0.5 ka, and make a correlation with the Late Glacial period very likely. The youngest fluvial aggradation period correlates to the beginning of the Little Ice Age, as confirmed by OSL and radiocarbon ages.     

A robust feldspar luminescence dating method for Middle and Late Pleistocene sediments

Luminescence dating is used extensively to provide absolute chronologies for Late Pleistocene sediments. Nowadays, most optical dates are based on quartz optically stimulated luminescence (OSL). However, the application of this signal is usually limited to the last ～100 ka because of saturation of the quartz luminescence signal with dose. In contrast, the feldspar infrared stimulated luminescence (IRSL) dose–response curve grows to much higher doses; this has the potential to extend the datable age range by a factor of 4–5 compared with quartz OSL. However, it has been known for several decades that this IRSL signal is unstable, and this instability often gives rise to significant age underestimation. Here we test against independent age control the recently developed feldspar post‐IR IRSL approach to the dating of sediments, which appears to avoid signal instability. A physical model explaining our observations is discussed, and the method is shown to be accurate back to 600 ka. The post‐IR IRSL signal is reduced by exposure to daylight more slowly than that from quartz and low‐temperature IRSL, preventing its general application to young (e.g. Holocene) sediments. Nevertheless, this new approach is widely applicable (feldspar of appropriate luminescence behaviour is even more ubiquitous than quartz). These characteristics make this a method of great importance for the dating of Middle and Late Pleistocene deposits.     

Graben width controlling syn-rift sedimentation: the Palaeogene southern Upper Rhine Graben as an example

Eocene to Early Oligocene syn-rift deposits of the southern Upper Rhine Graben (URG) accumulated in restricted environments. Sedimentation was controlled by local clastic supply from the graben flanks, as well as by strong intra-basinal variations in accommodation space due to differential tectonic subsidence, that in turn led to pronounced lateral variations in depositional environment. Three large-scale cycles of intensified evaporite sedimentation were interrupted by temporary changes towards brackish or freshwater conditions. They form three major base level cycles that can be traced throughout the basin, each of them representing a stratigraphic sub-unit. A relatively constant amount of horizontal extension (ΔL) in the range of 4–5 km has been estimated for the URG from numerous cross-sections. The width of the rift (L _f ), however, varies between 35 and more than 60 km, resulting in a variable crustal stretching factor between the bounding masterfaults. Apart from block tilting, tectonic subsidence was, therefore, largely controlled by changes in the initial rift width (L ₀). The along-strike variations of the graben width are responsible for the development of a deep, trough-like evaporite basin (Potash Basin) in the narrowest part of the southern URG, adjacent to shallow areas in the wider parts of the rift such as the Colmar Swell in the north and the Rhine Bresse Transfer Zone that delimits the URG to the south. Under a constant amount of extension, the along-strike variation in rift width is the principal factor controlling depo-centre development in extensional basins.     

Evolution and structure of the Upper Rhine Graben: insights from three-dimensional thermomechanical modelling

The evolution and geometry of the Tertiary Upper Rhine Graben were controlled by a continually changing stress field and the reactivation of pre-existing crustal discontinuities. A period of WNW-ESE extension in the late Eocene and Oligocene was followed by lateral translation from the early Miocene onwards. This study utilizes 3D finite element techniques to simulate extension and lateral translation on a lithospheric scale. Brittle and creep behaviour of lithospheric rocks are represented by elastoplasticity and thermally activated power-law viscoplasticity, respectively. Contact elements allocated with cohesion and frictional coefficients are used to describe pre-existing zones of weakness in the elastic-brittle field. Our results suggest that (1) extension is accommodated along listric border faults to midcrustal depth of 15–16 km. Beneath, pure shear stretching occurs without a need for localized shear zones in lower crust and upper mantle. (2) Ductile flow at midcrustal depth across the graben accounts for the pronounced halfgraben morphology. Thereby, the shape of the border faults, their frictional coefficients, and sedimentary loads have profound effects on the rate of ductile flow across the graben. (3) Horizontal extension of 8–8.5 km and sinistral displacement across the rift of 3–4 km are needed to accommodate the observed sediment thickness.     

Fluvial aggradation phases in the Upper Rhine Graben—new insights by quartz OSL dating

The Upper Rhine Graben (URG) is characterized by a thickness of up to 500 m of unconsolidated Quaternary sediments, providing excellent records of the Rhine river system and its responses to tectonic and climatic changes. The most complete Quaternary sequence of fluvial and limnic-fluvial deposits is found in the Heidelberg Basin, due to its long-term subsidence since the mid-Eocene. The aim of this study is to provide a chronological framework using optically stimulated luminescence (OSL) dating of aeolian and fluvial sands derived from the upper 33 m of a sediment core, which was drilled into the Heidelberg Basin infill close to the village of Viernheim, Germany. The OSL ages demonstrate that the dated fluvial sediments were deposited during the last glacial period (Weichselian) and that there were at least three aggradation periods during this episode. The coversands that cap the sequence were emplaced during the early Holocene.     

Localization of temperature anomalies in the Upper Rhine Graben: insights from geophysics and neotectonic activity

The European Cenozoic Rift System hosts major temperature anomalies in Central Europe. In its central segment, the Upper Rhine Graben (URG), temperatures range from 75°C to nearly 150°C at a depth of 2000 m. Different hypotheses have been suggested to explain the localization of these anomalies. Our review and comprehensive interpretation of gravimetric and magnetic data, as well as neotectonic activity patterns, suggests that low-density, mostly magnetic and fractured granitic basement is systematically associated with major temperature anomalies. Further analyses provide insight into different heat transport processes contributing to the localization of these anomalies. Magnetic and gravity anomalies are known to represent lithological variations associated with the pre-Permian. We show their spatial relationship with positive temperature anomalies in the URG. Correlation between magnetics and temperature reveal a mean contribution of heat production to the temperature anomaly of about 10–15°C. A slightly higher mean value is obtained from correlation between gravity and temperature, which may be attributed to effects resulting from fracture porosity. The spatial relationship between temperature anomalies and neotectonic patterns indicates compressional shear and uplift regime for the major anomalies of the central segment of the URG. This is in agreement with different numerical models indicating free convection on fracture zones linked to faults. Our findings show that about 15–25% of the temperature anomaly can be attributed to variation in heat production. Hydrothermal circulation convection along faults, activated by the tectonic context, may explain the remaining 75–85% of the temperature anomalies.     

Interplay between tectonic, fluvial and erosional processes along the Western Border Fault of the northern Upper Rhine Graben, Germany

The northern Upper Rhine Graben, situated in the central part of the European Cenozoic rift system, is currently characterized by low intra-plate seismicity. Historical earthquakes have not been large enough to produce surface rupturing. Moreover, the records of Quaternary surface processes and human modifications are presumably better preserved than the record of the relatively slow tectonic deformation.In order to gain information on the neotectonic activity and paleoseismicity in this setting, the geological and geomorphological records of fault movements along a segment of the Western Border Fault (WBF) were studied using an integration of techniques in paleoseismology, structural analysis and shallow geophysics. The WBF segment investigated follows a 20 km long linear scarp of unclear origin. A series of geophysical measurements were performed and the results suggested that near-surface deformation structures are present at the segments' southern end. Several trenches opened at this location revealed fault structures with consistent extensional style and a maximum vertical displacement of 0.5 m. In one trench, the deformation structures were dated between 19 and 8 ka. Assuming the deformation has been caused by an earthquake, a M_w 6.5 earthquake would be implied. Aseismic deformation would point to a fault creep rate ≥ 0.04 mm/yr.A reconstruction of the sequence of events at the trench site, from Middle Pleistocene to Present, demonstrates that the morphology at the base of the scarp is the result of interplay between tectonic activity and fluvial and erosional processes. At the regional scale, a mixed origin for the WBF scarp is proposed, combining the effects of fluvial dynamics, erosion, regional uplift and localized tectonic activity on the WBF.     

Multiple and single aliquot luminescence dating techniques applied to quartz extracted from Middle and Upper Weichselian loess,Zemechy, Czech Republic

This paper reports the application of optically stimulated luminescence (OSL) dating to relatively coarse grains (100–200 μm) of quartz extracted from loess. Two approaches were tested – a multiple aliquot technique and a new single aliquot approach, which is especially suited to the dating of small quantities of such grains found in some loess. The results are compared with infra‐red stimulated luminescence and thermoluminescence (TL) measurements on the finer‐grained (4–11 μm) polymineral fraction and TL measurements on the relatively coarse grains of quartz. The advantages of the new single aliquot (OSL) approach are described and the iterating, computer‐controlled measurement procedure is given. The automated iterative single aliquot regeneration (AISAR) method corrects for changes in luminescence sensitivity during the measurement sequence by monitoring the response to a test dose. Some initial measurements are presented for the loess section at Zemechy, Czech Republic, and these show that the AISAR method gives more precise results than those using a multiple aliquot method. Copyright © 2000 John Wiley & Sons, Ltd.     

Structural control of geothermal reservoirs in extensional tectonic settings: An example from the Upper Rhine Graben

In extensional tectonic settings major structural elements such as graben boundary faults are typically oriented subparallel to the maximum horizontal stress component S_Hmax. They are often structurally accompanied by transfer zones that trend subparallel to the extension direction. In the Upper Rhine Graben, such transfer faults are typically characterized by strike-slip or oblique-slip kinematics. A major re-orientation of the regional stress field by up to 90° of the Upper Rhine Graben in the Early Miocene led to the present-day normal and strike-slip faulting regimes in the North and South of the Upper Rhine Graben, respectively, and a transition zone in-between. Consequently, conditions for fault frictional failure changed significantly. Moreover, it has been observed during tracer and stimulation experiments that such transfer faults may be of major importance for the hydraulic field of geothermal reservoirs under the present stress condition, especially, when located between production and injection well.In this context we have investigated slip and dilation tendencies (T_S and T_D) of major structural elements at reservoir scale for two representative geothermal sites, Bruchsal (Germany) and Riehen (Switzerland), located close to the Eastern Main Boundary Fault of the Upper Rhine Graben. We have evaluated the quality and uncertainty range of both tendencies with respect to potential variation in S_Hmax orientation. Despite significant differences in orientation of the structures and the stress regimes, the resulting variation of T_S and T_D reveal major similarities concerning the reactivation potential of both, the graben-parallel structures and the transfer faults. The conditions of criticality for tensile failure and non-criticality for shear failure suggest that transfer faults are most likely naturally permeable structures with low stimulation potential. This is in agreement with the absence of both immediate tracer recovery and seismicity in the studied geothermal sites.     

Simultaneous normal faulting and extensional flexuring during rifting: an example from the southernmost Upper Rhine Graben

The southern end of the Upper Rhine Graben (URG) is formed by a major continental transfer zone, which was localised by the reactivation of ENE-oriented basement faults of Late Palaeozoic origin. A combination of subcrop data (derived from exploration wells and reflection seismic lines) and palaeostress analysis provided new constraints on the timing and kinematics of interacting basement faults. Rifting in the southern URG began in the Upper Priabonian under regional WNW–ESE-directed extension, oriented roughly perpendicular to the graben axis. In the study area, this led to the formation of NNE-trending half-grabens. Simultaneously, ENE-trending basement faults, situated in the area of the future Rhine-Bresse Transfer Zone (RBTZ), were reactivated in a sinistrally transtensive mode. In the sedimentary cover the strike-slip component was accommodated by the development of en-échelon aligned extensional flexures. Flexuring and interference between the differently oriented basement faults imposed additional, but locally confined extension in the sedimentary cover, which deviated by as much as 90° from the regional WNW–ESE extension. The interference of regional and local stresses led to a regime approaching radial extension at the intersection between the URG and RBTZ.     

Isotopic and hydrochemical studies of groundwater flow and salinity in the Southern Upper Rhine Graben

In order to determine the origin and the propagation mechanisms of highly concentrated chloride brines within the Quaternary aquifer system in the southern part of the Upper Rhine Graben, a combined isotope (H, O, C) and hydrochemical analysis was carried out. Groundwater recharge in this area is a complex system, consisting of local precipitation, river bank filtration, lateral flow from the Graben borders and, to a minor extent, an old Pleistocene component. In some areas, groundwater consists of up to 90% of recent bank filtrate, reaching depths down to at least 100 m. The isotopic and hydrochemical results show, that the elevated chloride concentrations in the Quaternary aquifer mainly result from leaky settling basins charged by the French potash mines until the mid 1970s. Input of natural brines coming from tertiary salt diapirs is of only minor importance. While infiltrating, the anthropogenic brines were strongly diluted by local river bank filtrate of the Rhine. Nevertheless, maximum chloride concentrations nowadays still reach some 10,000 mg/l at the base of the aquifer at a depth of more than 100 m below surface. The main volume of the brines is stored in the less permeable lower part of the quaternary sediments (Breisgau-Formation) whereas only a minor part is transported northwards with the rapid convective groundwater flow. Brines undergoing only dilution preserve their hydrochemical characteristics (NaCl-type). In contrast, brines recirculated from the Breisgau-Formation show a northwards increasing alteration through ion exchange processes. Potassium and sodium may be fixed in the fine grained aquifer material while calcium is set free into the groundwater. After a flow distance of about 12 km, complex hydraulic interactions between groundwater and surface waters lead to the rise of strongly diluted and hydrochemically altered brines with chloride contents up to maximum 700 mg/l. The presented case study is an example for a detailed analysis of a multi-component groundwater mixing system using combined isotope and hydrochemical methods. Furthermore, cation exchange is shown as a major process affecting the hydrochemical evolution of the young groundwater in the southern Upper Rhine Graben which is locally strongly polluted by chloride as a consequence of former potash mining.     

Patterns of Late Pleistocene proglacial fluvial sedimentation in the SE Lithuanian Plain

We investigated proglacial fluvial sedimentation processes in the SE Lithuanian Plain by means of lithofacies analysis. The main parameters on which interpretations were based, were depositional structures of sandy sediments, paleohydraulic parameters and grain-size distribution. The development of the SE Lithuanian Plain illustrates the phenomenal shift of proglacial fluvial sedimentation from outwash plain to ice-marginal river during the ice retreat of the last glaciation. Three facies assemblages of braidplain deposits and two facies assemblages of palaeovalley deposits were distinguished in the sandy plain by means of qualitative and quantitative sedimentological research. This raises the question how the commonly accepted development of a SE orientated outwash plain could turn into an almost perpendicular (SW running) ice-marginal river. The vertical and lateral transitions of outwash plain facies present a classical example of braidplain evolution on slightly inclined lowlands, with well expressed proximal, middle and distal parts. Mid- and side-channel (point-bar) deposits of the proglacial valley point, however, which is unusual for proglacial fluvial systems, to a meandering character of the ice-marginal river. River types of various scale show a change from braided into meandering in the proglacial subenvironment. Lithofacies analysis and paleohydraulic parameters show distinct differences of the hydrodynamic regime during the first stage of the sandy plain development: from sedimentation on an outwash plain in a proglacial valley to sedimentation on a braidplain in a wide ice-marginal valley. The outwash system is characterized by a distinct downstream decrease in energy, whereas the ice-marginal river maintained most of its power and velocity.     

Numerical modelling of chloride propagation in the quaternary aquifer of the southern Upper Rhine Graben

The deep groundwater in the quaternary gravel sequence of the southern Upper Rhine Graben locally contains high chloride concentrations near the river Rhine between Fessenheim (France) in the South and Breisach (Germany) in the North. This historical pollution is mainly due to past infiltration from the former brine storage basins of the French potash mines on the Fessenheim Island and—to a lesser extent—from the leaching of the salt dumps of the German potash mines in Buggingen and Heitersheim. The spreading of the salt plume was investigated by means of a groundwater model. The aim of the model was to understand the brine movement, the present distribution of chloride as defined by recent hydrochemical investigations, and to select locations for new reconnaissance boreholes. The geological structure was reproduced by a three layer model, which was calibrated for steady state flow conditions. The hydraulic conductivity of the first layer was determined by comparing measured and calculated heads in the model area. The vertical resolution was refined to simulate the density-dependent salt transport processes. The transport of the salt plumes was simulated over a 40-year period, starting at the beginning of brine storage in the 1950s. The relevant transport parameters have been estimated in a sensitivity analysis, where the simulated breakthrough curves of chloride concentration have been compared with the measured data. The results of the groundwater model indicate that brines containing approximately 1 million tons of chloride are still present at the bottom of the aquifer. These highly concentrated salt brines mix with fresh water from the upper part of the aquifer. This dispersive process leads to the formation of a plume of chloride-rich water extending downstream, where pumping wells for several local water supplies are located.     

An overview on source rocks and the petroleum system of the central Upper Rhine Graben

International Journal of Earth Sciences - The petroleum system of the Upper Rhine Graben (URG) comprises multiple reservoir rocks and four major oil families, which are represented by four distinct...     

Insight into the structure of the Upper Rhine Graben and its basement from a new compilation of Bouguer Gravity

A compilation of gravity data from the Upper Rhine Graben (URG) is presented that includes all the main data sources from its German and French parts. This data is used to show that the URG consists of, at least, two arc-shaped and asymmetric rift units that tectonically are the basic building blocks of the graben. In this sense the URG does not differ from other continental rifts, such as the African rifts. This division should replace the now classical geomorphologic division of the URG into three segments, based on their different trends. Moreover, the gravity suggests that the faults in the central and southern segments are continuous and have the same trend, appearing to respond as a single kinematic unit. Changes in the gravity field in the graben are shown to reflect not only the structure of the graben, but also the highly variable composition of the basement. In this respect, the URG is quite different from some other Tertiary continental rifts, where possible changes in the composition of the basement are mostly masked in the gravity field by the effect of the overlying low-density sediments. This characteristic is used to study the extent of some of the main basement units that underlie the graben.     

Loess chronology of the Middle and Upper Pleistocene in Tadjikistan

The loess/paleosol sequences of Central Asia are continuous terrestrial records of the Quaternary period and enable detailed comparison with paleoclimatic archives such as marine and ice core records in order to reconstruct regional and global paleoclimatic and paleoecological development during the past 130?000 years. Thermoluminescence (TL) and infrared stimulated luminescence (IRSL) dating methods are applied to the extensively studied loess/paleosol sequence of the section at Darai Kalon/Chashmanigar, Tadjikistan, in order to determine a more accurate chronological framework and climatostratigraphic reconstruction for the last interglacial/glacial cycle. Luminescence dating suggests that the loess above the first pedocomplex from the top, PC1, accumulated during the last glacial period. A high accumulation rate of up to 1.20?m per 1000 years was determined for the last glacial loess, especially for the uppermost 5–8?m. PC1 formed during the last interglacial period (oxygen-isotope stage 5). The loess between PC1 and PC2 is designated to be of penultimate glacial deposition age. Infrared stimulated luminescence and TL age estimates are in agreement to 80?000 years before present (BP), indicating a long-distance transport of the aeolian dust prior to deposition. The upper numerical age-limit range is between 300?000 and 450?000 years. However, reliable dating of the loess older than 130?000 years is not possible due to age scatter between samples and an inadequate increase of paleodose with depth. This high-resolution dating study underlines the importance of the section at Darai Kalon and indicates that it is one of the most continuous loess/paleosol records of the Northern Hemisphere. The chronological results are particularly important for the reconstruction of the human evolution in Central Asia, suggesting much older age estimates than previously obtained for most of the archeological key sites associated with PC5 and PC4 in Tadjikistan.     

Chronologies of sedimentary changes in the south Bohai Sea,China: constraints from luminescence and radiocarbon dating

The alternation of terrestrial and marine deposits is an indicator of past environmental and sea‐level changes. The age of deposition is usually dated by means of radiocarbon. However, radiocarbon dates of molluscan shells from coastal areas may be complicated by various sources of carbon, and problematic for deposits of 40–50 ka or older. Herein, we apply the Optically Stimulated Luminescence (OSL) dating method to date samples from terrestrial and marine/coastal sediments extracted from three cores in the south Bohai Sea, China. Multiple‐ and single‐aliquot regenerative‐dose procedures using OSL signals from fine‐silt (4–11 μm), coarse‐silt (38–63 μm) and fine‐sand (63–90 or 90–125 μm) quartz were employed to determine the equivalent dose (D _e). The results showed that: (i) OSL ages from quartz of different grain sizes and different protocols are consistent with each other; (ii) for Holocene samples, most of the radiocarbon dates agree well with OSL ages; (iii) for pre‐Holocene samples, radiocarbon dates cluster at 40–50 ¹⁴ C ka BP, whereas OSL ages are in stratigraphic order from 11 ka to 176 ka. Because of the self‐consistency of the quartz OSL ages, the stratigraphic agreement in the three cores, and the clustering of the radiocarbon dates, we suggest that the quartz OSL ages are more reliable with respect to dating the samples from the south Bohai Sea. Finally, the four marine strata identified in the south Bohai Sea are likely to have formed during the Holocene, Marine Isotopic Stage (MIS) 3–5, MIS 6 and probably MIS 7, respectively.     

Bleaching of the post‐IR IRSL signal: new insights for feldspar luminescence dating

Post‐infrared (pIR) stimulated luminescence dating of sedimentary feldspar largely avoids the effects of anomalous fading that affect conventional infrared stimulated luminescence (IRSL) dating. However, optical resetting of pIR signals is more difficult than resetting the conventional IRSL signal, which may undermine the crucial assumption that pIR signals were effectively bleached upon deposition and burial of sediment grains. In this study, we quantify the bleaching properties of several pIR signals on various samples using laboratory‐simulated bleaching in full sunlight and water‐attenuated sunlight. Our data show that bleaching is most efficient under full spectrum conditions for all pIR signals and that pIR signals measured at elevated temperature are increasingly harder to bleach than IR and pIR signals measured at low temperature (e.g. IR at 50°C). All bleaching curves exhibit a very slow and steady decrease, indicating that a fixed un‐bleachable residual level cannot be reached within the 11 days of solar simulator exposure undertaken here. We show that the magnitude of a laboratory‐determined residual dose depends on the adopted bleaching protocol and cannot be used as a proxy for the dose that remains in the sample at the time of burial (remnant dose). Our data emphasize the importance of finding a balance between sufficient signal stability and a minimized contribution of a remnant dose when using pIR procedures for feldspar luminescence dating.