Layered ejecta craters and the early water/ice aquifer on Mars

Abstract— A model for emplacement of deposits of impact craters is presented that explains the size range of Martian layered ejecta craters between 5 km and 60 km in diameter in the low and middle latitudes. The impact model provides estimates of the water content of crater deposits relative to volatile content in the aquifer of Mars. These estimates together with the amount of water required to initiate fluid flow in terrestrial debris flows provide an estimate of 21% by volume (7.6 × 10⁷km³) of water/ice that was stored between 0.27 and 2.5 km depth in the crust of Mars during Hesperian and Amazonian time. This would have been sufficient to supply the water for an ocean in the northern lowlands of Mars. The existence of fluidized craters smaller than 5 km diameter in some places on Mars suggests that volatiles were present locally at depths less than 0.27 km. Deposits of Martian craters may be ideal sites for searches for fossils of early organisms that may have existed in the water table if life originated on Mars.     

The planforms of low‐angle impact craters in the northern hemisphere of Mars

Abstract— We have surveyed Martian impact craters greater than 5 km in diameter using Viking and thermal emission imaging system (THEMIS) imagery to evaluate how the planform of the rim and ejecta changes with decreasing impact angle. We infer the impact angles at which the changes occur by assuming a sin²θ dependence for the cumulative fraction of craters forming below angle θ. At impact angles less than ?40° from horizontal, the ejecta become offset downrange relative to the crater rim. As the impact angle decreases to less than ?20°, the ejecta begin to concentrate in the cross‐range direction and a “forbidden zone” that is void of ejecta develops in the uprange direction. At angles less than ?10°, a “butterfly” ejecta pattern is generated by the presence of downrange and uprange forbidden zones, and the rim planform becomes elliptical with the major axis oriented along the projectile's direction of travel. The uprange forbidden zone appears as a “V” curving outward from the rim, but the downrange forbidden zone is a straight‐edged wedge. Although fresh Martian craters greater than 5 km in diameter have ramparts indicative of surface ejecta flow, the ejecta planforms and the angles at which they occur are very similar to those for lunar craters and laboratory impacts conducted in a dry vacuum. The planforms are different from those for Venusian craters and experimental impacts in a dense atmosphere. We interpret our results to indicate that Martian ejecta are first emplaced predominantly ballistically and then experience modest surface flow.     

Arecibo radar observations of Mars surface characteristics in the northern hemisphere

Mars surface characteristics at and near the Viking Chryse and Tritonis Lacus landing areas were determined by radio scatter using the new 12.6 cm radar at the Arecibo Observatory during 1975–1976. Interpretation of each power spectrum suggests rms surface tilts of 4° at the final A1WNW (47.9°W, 22.5°N) site, 5° near the original A1 site, and 6° between the two. At the back-up site (A2) surface roughness estimates were about 4°. Striking changes in surface texture have been found near the eastern bases of Tharsis Montes and Albor Tholus, each volcanic feature marking the western boundary of very smooth surface units. The roughness sensed at 1 to 100 m scales by radar appears to be relatively independent of the surface units defined at large scale lengths by photogeologists. Radar properties thus provide an additional means by which planetary surfaces may be characterized.     

Comparison of central pit craters on Mars,Mercury, Ganymede,and the Saturnian satellites

We report on the first results of a large‐scale comparison study of central pit craters throughout the solar system, focused on Mars, Mercury, Ganymede, Rhea, Dione, and Tethys. We have identified 10 more central pit craters on Rhea, Dione, and Tethys than have previously been reported. We see a general trend that the median ratio of the pit to crater diameter (D_p/D_c) decreases with increasing gravity and decreasing volatile content of the crust. Floor pits are more common on volatile‐rich bodies while summit pits become more common as crustal volatile content decreases. Uplifted bedrock from below the crater floor occurs in the central peak upon which summit pits are found and in rims around floor pits, which may or may not break the surface. Peaks on which summit pits are found on Mars and Mercury share similar characteristics to those of nonpitted central peaks, indicating that some normal central peaks undergo an additional process to create summit pits. Martian floor pits do not appear to be the result of a central peak collapse as the median ratio of the peak to crater diameter (D_pk/D_c) is about twice as high for central peaks/summit pits than D_p/D_c values for floor pits. Median D_pk/D_c is twice as high for Mars as for Mercury, reflecting differing crustal strength between the two bodies. Results indicate that a complicated interplay of crustal volatiles, target strength, surface gravity, and impactor energy along with both uplift and collapse are involved in central pit formation. Multiple formation models may be required to explain the range of central pits seen throughout the solar system.     

Testing landslide and atmospheric-effects models for the formation of double-layered ejecta craters on Mars

Double-layered ejecta (DLE) craters are distinctive among the variety of crater morphologies observed on Mars, but the mechanism by which they form remains under debate. We assess two ejecta emplacement mechanisms: (1) atmospheric effects from ejecta curtain-induced vortices or a base surge and (2) ballistic emplacement followed by a landslide of ejecta assisted by either surface- or pore-ice. We conduct a morphological analysis of the ejecta facies for three DLE craters which impacted into irregular pre-existing topography. We find that the unique topographic environments affected the formation of grooves and the inner facies, and thus appear to be inconsistent with an atmospheric-effects origin but are supportive of the landslide hypothesis. We distinguish between the two landslide models (lubrication by either surface- or pore-ice) by assessing relationships between DLE crater ejecta and morphologic features indicative of buried ice deposits, including sublimation pits, ring-mold craters, expanded secondary craters, and excess ejecta craters. The association of DLE craters with these features suggests that surface ice was present at the time of the impacts that formed the DLE craters. We also compare the Froude numbers of DLE crater ejecta to landslides, and find that the ejecta of DLE craters are kinematically and frictionally similar to terrestrial landslides that overran glaciers. This suggests that the grooves on DLE craters may plausibly form through the same shear/splitting mechanism as the landslides. In summary, our analysis supports the hypothesis that DLE craters form through meteoroid impacts into decameters-thick surface ice deposits (emplaced during periods of higher obliquity) followed by ejecta sliding on the ice.     

Impacts into non-polar ice-rich paleodeposits on Mars: Excess ejecta craters, perched craters and pedestal craters as clues to Amazonian climate history

We compare three previously independently studied crater morphologies - excess ejecta craters, perched craters, and pedestal craters - each of which has been proposed to form from impacts into an ice-rich surface layer. Our analysis identifies the specific similarities and differences between the crater types; the commonalities provide significant evidence for a genetic relationship among the morphologies. We use new surveys of excess ejecta and perched craters in the southern hemisphere in conjunction with prior studies of all of the morphologies to create a comprehensive overview of their geographic distributions and physical characteristics. From these analyses, we conclude that excess ejecta craters and perched craters are likely to have formed from the same mechanism, with excess ejecta craters appearing fresh while perched craters have experienced post-impact modification and infilling. Impacts that led to these two morphologies overwhelmed the ice-rich layer, penetrating into the underlying martian regolith, resulting in the excavation of rock that formed the blocky ejecta necessary to armor the surface and preserve the ice-rich deposits. Pedestal craters, which tend to be smaller in diameter, have the same average deposit thickness as excess ejecta and perched craters, and form in the same geographic regions. They rarely have ejecta around their crater rims, instead exhibiting a smooth pedestal surface. We interpret this to mean that they form from impacts into the same type of ice-rich paleodeposit, but that they do not penetrate through the icy surface layer, and thus do not generate a blocky ejecta covering. Instead, a process related to the impact event appears to produce a thin, indurated surface lag deposit that serves to preserve the ice-rich material. These results provide a new basis to identify the presence of Amazonian non-polar ice-rich deposits, to map their distribution in space and time, and to assess Amazonian climate history. Specifically, the ages, distribution and physical attributes of the crater types suggest that tens to hundreds of meters of ice-rich material has been episodically emplaced at mid latitudes in both hemispheres throughout the Amazonian due to obliquity-driven climate variations. These deposits likely accumulated more frequently in the northern lowlands, resulting in a larger population of all three crater morphologies in the northern hemisphere.     

Martian perched craters and large ejecta volume: Evidence for episodes of deflation in the northern lowlands

Abstract— The northern lowland plains, such as those found in Acidalia and Utopia Planitia, have high percentages of impact craters with fluidized ejecta. In both regions, the analysis of crater geometry from Mars Orbiter Laser Altimeter (MOLA) data has revealed large ejecta volumes, some exceeding the volume of excavation. Moreover, some of the crater cavities and fluidized ejecta blankets of these craters are topographically perched above the surrounding plains. These perched craters are concentrated between 40 and 70°N in the northern plains. The atypical high volumes of the ejecta and the perched craters suggest that the northern lowlands have experienced one or more episodes of resurfacing that involved deposition and erosion. The removal of material, most likely caused by the sublimation of ice in the materials and their subsequent erosion and transport by the wind, is more rapid on the plains than on the ejecta blankets. The thermal inertia difference between the ejecta and the surrounding plains suggests that ejecta, characterized by a lower thermal inertia, protect the underneath terrain from sublimation. This results in a decreased elevation of the plains relative to the ejecta blankets. Sublimation and eolian erosion can be particularly high during periods of high obliquity.     

Ries and Chicxulub: Impact craters on Earth provide insights for Martian ejecta blankets

Abstract— Terrestrial impact structures provide field evidence for cratering processes on planetary bodies that have an atmosphere and volatiles in the target rocks. Here we discuss two examples that may yield implications for Martian craters: 1. Recent field analysis of the Ries crater has revealed the existence of subhorizontal shear planes (detachments) in the periphery of the crater beneath the ejecta blanket at 0.9–1.8 crater radii distance. Their formation and associated radial outward shearing was caused by weak spallation and subsequent dragging during deposition of the ejecta curtain. Both processes are enhanced in rheologically layered targets and in the presence of fluids. Detachment faulting may also occur in the periphery of Martian impacts and could be responsible for the formation of lobe‐parallel ridges and furrows in the inner layer of double‐layer and multiple‐layer ejecta craters. 2. The ejecta blanket of the Chicxulub crater was identified on the southeastern Yucatán Peninsula at distances of 3.0–5.0 crater radii from the impact center. Abundance of glide planes within the ejecta and particle abrasion both rise with crater distance, which implies a ground‐hugging, erosive, and cohesive secondary ejecta flow. Systematic measurement of motion indicators revealed that the flow was deviated by a preexisting karst relief. In analogy with Martian fluidized ejecta blankets, it is suggested that the large runout was related to subsurface volatiles and the presence of basal glide planes, and was influenced by eroded bedrock lithologies. It is proposed that ramparts may result from enhanced shear localization and a stacking of ejecta material along internal glide planes at decreasing flow rates when the flow begins to freeze below a certain yield stress.     

Modification of impact craters in the northern plains of Mars: Implications for Amazonian climate history

Abstract— We measured the depth, wall steepness, and ejecta roughness and surveyed the wall and floor morphology of all craters 10–25 km in diameter within the typical Vastitas Borealis Formation in the northern lowlands of Mars north of 52°N. Two of the 130 craters have unusually rough ejecta; they are deep, have steep walls, and are apparently the youngest in the population. Icy mantles filling the local subkilometer‐scale topographic lows is the main contribution to ejecta smoothing, which occurs at a time scale on the order of tens of Myr. Wall degradation and crater shallowing generally occur at longer time scales, comparable to the duration of the Amazonian period. Many craters are shallow due to filling of the crater with specific ice‐rich material of uncertain origin. We use our collected data to infer the nature of the past climate back through the Amazonian, a period prior to ?10–20 Myr ago, when orbital parameter solutions are chaotic and one must rely on geological data to infer climate conditions. We conclude that moderately high obliquity and wide obliquity variations were probable during the last 40–160 Myr. We tentatively conclude that high obliquity peaks (>40–45°) may have occurred episodically through the last 210–430 Myr. A sharp step in the frequency distribution of wall steepness at 20° may indicate a geologically long period prior to that time where obliquity never exceeded 40–45°.     

Further observations of regional dust storms and baroclinic eddies in the northern hemisphere of Mars

We have investigated the near-surface meteorology in the northern hemisphere of Mars through detailed analysis of data obtained with Mars Global Surveyor in January-August 2005. The season in the northern hemisphere ranged from midsummer through winter solstice of Mars Year (MY) 27. We examined composite, wide-angle images from the Mars Orbiter Camera and compiled a catalog of the dust storms that occurred in this interval. As in previous martian years, activity in the northern hemisphere was dominated by regional “flushing” dust storms that sweep southward through the major topographic basins, most frequently in Acidalia Planitia. We also used atmospheric profiles retrieved from radio occultation experiments to characterize eddy activity near the surface at high northern latitudes. There are strong correlations between the two sets of observations, which allowed us to identify three factors that influence the timing and location of the regional dust storms: (1) transitions among baroclinic wave modes, which strongly modulate the intensity of meridional winds near the surface, (2) storms zones, which impose strong zonal variations on the amplitude of some baroclinic eddies, and (3) stationary waves, which further modulate the wind field near the surface. The flushing dust storms ceased abruptly in midautumn, possibly in response to source depletion, CO₂ condensation, a shift in the period of the baroclinic eddies, and changes in the tidal wind field near the surface. Our results extend the meteorological record of the northern hemisphere, substantiate the findings of previous investigations, and further illuminate the climatic impact of baroclinic eddies.     

Indications of brine related local seepage phenomena on the northern hemisphere of Mars

Springtime low albedo features, called Dark Dune Spots, on the seasonal frost covered dunes on Mars between 77°N and 84°N latitude have been analyzed. Two groups of these spots have been identified: “small” and “large” ones, where large spots have diameters above 4 m, and complex internal structure. From these “large” spots branching seepage-like features emanate and grow on the steep slopes. They show a characteristic sequence of changes: first only wind-blown features emanate from them, while later a bright circular and elevated ring forms, and dark seepage-features start from the spots. These streaks grow with a speed between 0.3 m/day and 7 m/day respectively, first only from the spots, later from all along the dune crest.During this “seepage period” the temperature is between 150 K and 180 K at a 3-9 km spatial resolution scale, indicating that CO₂ ice-free parts must be present at the observed dark spots. Around the receding northern seasonal CO₂ cap, an annulus of water ice lags behind, which is probably present in the spots too where the CO₂ frost has sublimated. Our model estimates show in the present work and in Kereszturi et al. (Kereszturi, A., Möhlmann, D., Berczi, Sz., Ganti, T., Kuti, A., Sik, A., Horvath, A. [2009b]. Icarus 201, 492-503) that the warming driven by solar insolation may produce not only interfacial water, but also bulk brines around the dune grains. The brine can support the movement of liquids and dune grains, enhances the sublimation of CO₂ frost, and produce the dark features, as well as liquid modifies the optical properties of the surface.Signs of movement of dune material after the total defrosting of the terrain is also visible but it is uncertain because of the limit of resolution. In our previous work (Kereszturi et al., 2009b) we showed that resembling seepage-like streaks at the southern hemisphere might have been formed by ephemeral interfacial water, as well as these northern features. Such wet environments may have astrobiological importance too.     

Dust storms originating in the northern hemisphere during the third mapping year of Mars Global Surveyor

Data from the third Mars Global Surveyor (MGS) mapping year (MY 26, 2003-2005) are used to investigate dust storms originating in the northern hemisphere. Flushing dust storms, which originate as frontal dust storms at the northern polar vortex edge and propagate southward through topographic channels, are observed immediately before and after a quiescent period that occurs around the northern winter solstice (240°<Ls<300°). Both the pre- and post-solstice active periods can be further divided into two sub-periods. The most vigorous of these flushing storms occurred during L_s 210-220° and L_s 310-320°. The lifted dust crossed the equator and accumulated in the southern hemisphere. These major dust storms enhanced the Hadley circulation and suppressed the lower-level baroclinic eddies in the northern mid and high latitudes. The 2-3 sol wave number m=3 traveling waves show the best correlation with flushing dust storms and can combine with other wave modes to produce storm tracks and fronts within individual sub-periods.     

Measurements of the north polar cap of Mars and the Earth's northern hemisphere ice and snow cover

The boundaries of the polar caps of Mars have been measured on more than 3000 photographs since 1905 from the plate collection at the Lowell Observatory. For the Earth, the polar caps have been accurately mapped only since the mid 1960's when satellites were first available to synoptically view the polar regions. The polar caps of both planets wax and wane in response to changes in the seasons, and interannual differences in polar cap behavior on Mars as well as Earth are intimately linked to global energy balance. Data on the year to year variations in the extent of the north polar caps of Mars and Earth have been assembled and compared, although only 6 years of concurrent data were available for comparison.     

Ejecta emplacement and modes of formation of martian fluidized ejecta craters

From an analysis of 1173 craters possessing single (Type I) and double (Type 2) concentric ejecta deposits, Type 2 craters are found to occur most frequently in areas that have also been described as possessing periglacial features. The frequency of occurence of central peaks and wall failure (terraces plus scallops) within the craters indicate that, by analogy with previous analyses, Type 1 craters form in more fragmental targets than Type 2 craters. The maximum range of the outer ejecta deposits of Type 2 craters, however, consistently extends ～0.8 crater radii further than ejecta deposits of Type 1 craters, suggesting a greater degree of ejecta fluidization for the twin-lobed Type 2 craters. Numerous characteristics of Ries Crater, West Germany, show similarities to craters on Mars, indicating that Martian fluidized ejecta craters may be closer analogs to this terrestrial crater than are lunar craters.     

A multi-year survey of dynamics near the surface in the northern hemisphere of Mars: Short-period baroclinic waves and dust storms

Baroclinic waves figure prominently in the dynamics of the northern hemisphere of Mars, and extensive observations by the Viking Landers and two atmospheric sounders on Mars Global Surveyor have revealed many of their basic properties. However, previous investigations considered these data sets individually, so that their cumulative value is not fully appreciated. We have re-examined these data to extract new information about the dynamics near the surface at mid-to-high northern latitudes. By applying the same method of spectral analysis to each type of observation, we derive a uniform, multi-year characterization of basic elements of martian weather. This survey documents the time evolution of baroclinic waves among modes with different periods and zonal wave numbers. We devote particular attention to a recurring “wave-3 mode”, which is distinguished by its capacity to initiate regional dust storms in the topographic basins of the northern hemisphere. Our results include a detailed case study that shows how the intermittence of this mode and the strong zonal modulation of its amplitude influence the timing and location of these distinctive “flushing” dust storms. More generally, we find that the properties of the wave-3 mode are largely the same whenever it appears and that its intermittence plays an important role in the annual dust cycle.     

Ejecta size-velocity relation derived from the distribution of the secondary craters of kilometer-sized craters on Mars

The relation between the size and velocity of impact crater ejecta has been studied by both laboratory experiments and numerical modeling. An alternative method, used here, is to analyze the record of past impact events, such as the distribution of secondary craters on planetary surfaces, as described by Vickery (Icarus 67 (1986) 224; Geophys. Res. Lett. 14 (1987) 726). We first applied the method to lunar images taken by the CLEMENTINE mission, which revealed that the size-velocity relations of ejecta from craters 32 and 40 km in diameter were similar to those derived by Vickery for a crater 39 km in diameter. Next, we studied the distribution of small craters in the vicinity of kilometer-sized craters on three images from the Mars Orbiter Camera (MOC) on board the Mars Global Surveyor (MGS). If these small craters are assumed to be secondaries ejected from the kilometer-sized crater in each image, the ejection velocities are of hundreds of meters per second. These data fill a gap between the previous results of Vickery and those of laboratory studies.     

Observations of Martian layered ejecta craters and constraints on their formation mechanisms

The formation mechanism of layered ejecta craters on Mars has remained a topic of intense debate since their discovery. In this study, we perform a global morphological analysis of Martian layered ejecta craters using Thermal Emission Imaging System (THEMIS) images and Mars Orbiter Laser Altimeter (MOLA) data. The study focuses on the ejecta morphologies and well‐defined distal rampart characteristics associated with 9945 layered ejecta craters with a diameter greater than 1.5 km distributed across the entire Martian surface. Data analysis based on the new database provides new information on the distribution and morphological details of the three major layered ejecta morphologies (single layer ejecta [SLE], double layer ejecta [DLE], and multiple layer ejecta [MLE]). Global analysis is applied to the latitudinal distribution of characteristic parameters, including the ejecta mobility, lobateness values, and onset diameter. Our survey of the distribution and characteristics of layered ejecta craters reveals that strong correlations exist between ejecta mobility and latitude, and there is a latitudinal dependence of onset diameter. Our study of Martian layered ejecta craters provides more detailed information and insights of a connection between the layered ejecta morphologies and the subsurface volatiles.     

Preservation of layered paleodeposits in high-latitude pedestal craters on Mars

An outstanding question in Mars’ climate history is whether or not pedestal craters represent the armored remnants of ice-rich paleodeposits. We address this question using new high-resolution images; in a survey of several hundred high-latitude pedestal craters, we have identified 12 examples in which visible and/or topographically expressed layers are exposed on the marginal scarp of the pedestal. One example, located on the south polar layered deposits, preserves ice-rich layers that have otherwise been completely removed from the polar cap. These observations provide empirical evidence that the pedestal crater formation mechanism is capable of armoring and preserving ice-rich layered paleodeposits. Although layered exposures have not yet been observed in mid-latitude pedestal craters, high-latitude instances of discontinuous, partially covered layers suggest that layers can be readily concealed, likely through mantling and/or mass wasting processes along the marginal scarp. This interpretation is supported by the observation that high-latitude pedestals with exposed layers along their margins are, on average, taller than mid-latitude examples, and have larger, steeper marginal scarps, which may help to maintain layer exposures. These observations favor the interpretation that mid- to high-latitude pedestal craters represent the armored remnants of ice- and dust-rich paleodeposits, which occurred transiently due to changes in the climate regime. Preservation of fine-scale layering of ice and dust at these latitudes implies that the climate change did not involve regional melting conditions.     

Curvilinear features in the southern hemisphere observed by Mars Global Surveyor Mars Orbiter Camera

We have used the complete set of Mars Global Surveyor (MGS) Mars Daily Global Maps (MDGMs) to study martian weather in the southern hemisphere, focusing on curvilinear features, including frontal events and streaks. “Frontal events” refer to visible events that are morphologically analogous to terrestrial baroclinic storms. MDGMs show that visible frontal events were mainly concentrated in the 210-300°E (60-150°W) sector and the 0-60°E sector around the southern polar cap during L_s = 140-250° and L_s = 340-60°. The non-uniform spatial and temporal distributions of activity were also shown by MGS Thermal Emission Spectrometer transient temperature variations near the surface. “Streaks” refer to long curvilinear features in the polar hood or over the polar cap. They are an indicator of the shape of the polar vortex. Streaks in late winter usually show wavy segments between the 180° meridian and Argyre. Model results suggest that the zonal wave number m = 3 eastward traveling waves are important for their formation.     

Centers of tectonic activity in the eastern hemisphere of Mars

We compiled a paleotectonic map for the eastern hemisphere of Mars to determine if extensional tectonic features (graben) are radial or compressional tectonic features (wrinkle ridges) are concentric to centers of tectonic activity defined by axisymmetric stress fields. Using a vector analysis technique all latitude and longitude points (1° bins) are tested to see if they lie on great circle extensions of extensional structures (the plane defined by the maximum and intermediate principal stresses) or great circle perpendiculars to compressional structures (the plane defined by the maximum and minimum compressional stresses). Centers of tectonic activity are defined as 5° areas whose concentrations of great circle extensions of tectonic features are statistically significant (e.g., 3σ or 7.4σ for large populations) and therefore are not the result of random noise. Our paleotectonic investigation has identified four statistically significant centers of tectonic activity within the eastern hemisphere: Elysium, Hadriaca/Tyrrhena-Hellas, Isidis-Syrtis, and Arabia Terra. Two of these centers (Hadriaca/Tyrrhena and Isidis-Syrtis) meet the 7.4σ statistical criteria and thus represent primary centers of tectonic activity with axisymmetric stress fields. The remaining two meet the 3σ statistical criteria and thus are defined as secondary centers of tectonic activity. Because the structures that define the centers extend over 80° of the planet the defined centers of tectonic activity are regional in character and related to modified impact basins or volcanic centers (all are more limited in extent than the Tharsis stress system that extends over the entire western hemisphere). The observation that statistically significant centers of tectonic activity are quantifiably and statistically identified argues that the crust and lithosphere of the eastern hemisphere at a regional scale is not dominated by regional inhomogeneities and anisotropies.