The complex impact structure Serra da Cangalha,Tocantins State,Brazil

Abstract– Serra da Cangalha is a complex impact structure with a crater diameter of 13,700 m and a central uplift diameter of 5800 m. New findings of shatter cones, planar fractures, feather features, and possible planar deformation features are presented. Several ring‐like features that are visible on remote sensing imagery are caused by selective erosion of tilted strata. The target at Serra da Cangalha is composed of Devonian to Permian sedimentary rocks, mainly sandstones that are interlayered with siltstone and claystones. NNE–SSW and WNW–ESE‐striking joint sets were present prior to the impact and also overprinted the structure after its formation. As preferred zones of weakness, these joint sets partly controlled the shape of the outer perimeter of the structure and, in particular, affected the deformation within the central uplift. Joints in radial orientation to the impact center did not undergo a change in orientation during tilting of strata when the central uplift was formed. These planes were used as major displacement zones. The asymmetry of the central uplift, with preferred overturning of strata in the northern to western sector, may suggest a moderately oblique impact from a southerly direction. Buckle folding of tilted strata, as well as strata overturning, indicates that the central uplift became gravitationally unstable at the end of crater formation.     

Insights into the morphology of the Serra da Cangalha impact structure from geophysical modeling

Forward modeling is commonly applied to gravity field data of impact structures to determine the main gravity anomaly sources. In this context, we have developed 2.5‐D gravity models of the Serra da Cangalha impact structure for the purpose of investigating geological bodies/structures underneath the crater. Interpretation of the models was supported by ground magnetic data acquired along profiles, as well as by high resolution aeromagnetic data. Ground magnetic data reveal the presence of short‐wavelength anomalies probably related to shallow magnetic sources that could have been emplaced during the cratering process. Aeromagnetic data show that the basement underneath the crater occurs at an average depth of about 1.9 km, whereas in the region beneath the central uplift it is raised to 0.5–1 km below the current surface. These depths are also supported by 2.5‐D gravity models showing a gentle relief for the basement beneath the central uplift area. Geophysical data were used to provide further constraints for numeral modeling of crater formation that provided important information on the structural modification that affected the rocks underneath the crater, as well as on shock‐induced modifications of target rocks. The results showed that the morphology is consistent with the current observations of the crater and that Serra da Cangalha was formed by a meteorite of approximately 1.4 km diameter striking at 12 km s^?1.     

An appraisal of the Serra da Cangalha impact structure using the Euler deconvolution method

Abstract— The applicability of the Euler deconvolution method in imaging impact crater structure vis‐à‐vis delineation of source depth of the circular magnetic anomaly and/or basement depth beneath the crater is addressed in this paper. The efficacy of the method has been evaluated using the aeromagnetic data obtained over the Serra da Cangalha impact crater, northeastern Brazil. The analyses of the data have provided characteristic Euler deconvolution signatures and structural indices associated with impact craters. Also, through the interpretation of the computed Euler solutions, our understanding of the structural features present around the impact structure has been enhanced. The Euler solutions obtained indicate shallow magnetic sources that are interpreted as possibly post‐impact faults and a circular structure. The depth of these magnetic sources varies between 0.8 and 2.5 km, while the Precambrian basement depth was found at ?1.5 km. This is in good agreement with the estimates of the Precambrian basement depth of about 1.1 km, calculated using aeromagnetic data. The reliability of the depth solutions obtained through the implementation of the Euler method was confirmed through the use of the existing information available in the area and the result of previous studies. We find that the Euler depth solutions obtained in this study are consistent with the results obtained using other methods.     

Structural evolution of the 40 km wide Araguainha impact structure,central Brazil

Abstract— The 40 km wide Araguainha structure in central Brazil is a shallowly eroded impact crater that presents unique insights into the final stages of complex crater formation. The dominant structural features preserved at Araguainha relate directly to the centripetal movement of the target rocks during the collapse of the transient cavity. Slumping of the transient cavity walls resulted in inward‐verging inclined folds and a km‐scale anticline in the outer ring of the structure. The folding stage was followed by radial and concentric faulting, with downward displacement of kilometer‐scale blocks around the crater rim. The central uplift records evidence for km‐scale upward movement of crystalline basement rocks from the transient cavity floor, and lateral moment of sedimentary target rocks detached from the cavity walls. Much of the structural grain in the central uplift relates to structural stacking of km‐scale thrust sheets of sedimentary strata onto the core of crystalline basement rocks. Outward‐plunging radial folds indicate tangential oblate shortening of the strata during the imbrication of the thrust sheets. Each individual sheet records an early stage of folding and thickening due to non‐coaxial strains, shortly before sheet imbrication. We attribute this folding and thickening phase to the kilometer‐scale inward movement of the target strata from the transient cavity walls to the central uplift. The outer parts of the central uplift record additional outward movement of the target rocks, possibly related to the collapse of the central uplift. An inner ring structure at 10–12 km from the crater center marks the extent of the deformation related to the outward movement of the target rocks.     

40Ar/39Ar dating of the Araguainha impact structure,Mato Grosso,Brazil

Abstract— Pursuing the exploration of the Araguainha impact structure (Engelhardt et al., 1992), we present ⁴⁰Ar/³⁹Ar ages (1) of biotite samples from the granite, which forms the central uplift of the structure, and (2) of a melt rock, formed by the impact. Total degassing ages of biotites from granite samples range from 326 to 481 Ma. The variation is explained by Ar losses due to the oxidation of divalent Fe and by removal of K. The K loss depends on the time that the granite was exposed to weathering at particular outcrops. The oldest age of the least oxidized biotite from a granite sample, collected at a site most recently exposed, signifies that the ascending granite passed the 300° isotherm earlier than 481 Ma ago. Early Devonian Furnas sandstones, the oldest sediments exposed by the impact, were deposited on this granite basement 410–396 Ma ago. The ⁴⁰Ar/³⁹Ar analyses of two size fractions of an impact melt rock, resulting in plateau ages of 245.5 ± 3.5 Ma and 243.3 ± 3.0 Ma, respectively, indicate that the Araguainha impact occurred close to the Permian-Triassic boundary.     

Geology and impact features of Riachão structure,northern Brazil

Riachão, located at S7°42′/W46°38′ in Maranhão State, northeastern Brazil, is a complex impact structure of about 4.1 km diameter, formed in Pennsylvanian to Permian sedimentary rocks of the Parnaíba Basin sequence. Although its impact origin was already proposed in the 1970s, information on its geology and shock features is still scarce in the literature. We present here the main geomorphological and geological characteristics of the Riachão impact structure obtained by integrated geophysical and remote sensing analysis, as well as geological field work and petrographic analysis. The identified lithostratigraphic units consist of different levels of the Pedra de Fogo Formation and, possibly, the Piauí Formation. Our petrographic analysis confirms the presence of shock‐diagnostic planar microdeformation structures in quartz grains of sandstone from the central uplift as evidence for an impact origin of the Riachão structure. The absence of crater‐filling impact breccias and melt rocks, shatter cones, as well as the restricted occurrence of microscopic shock effects, suggests that intense and relatively deep erosion has occurred since crater formation.     

Shocked lithologies at the Wanapitei impact structure,Ontario, Canada

Abstract The ～7.5 km diameter Wanapitei impact structure (46°45′N; 80°45′W) lies entirely within Lake Wanapitei in central Ontario, Canada. Impact lithologies are known only from glacial float at the southern end of the lake. Over 50% of the impact lithologies recovered from this float can be classified as suevite, <20% as highly shocked and partially melted arkosic metasediments of the target rock Mississagi Formation or, possibly, the Serpent Formation and <20% as glassy impact melt rocks. An additional <5% of the samples have similarities to the suevite but have up to 50% glass clasts and are tentatively interpreted as fall-back material. The glassy impact melt rocks fall into two textural and mineralogical types: a perlitically fractured, colorless glass matrix variant, with microlites of hypersthene with up to 11.5% Al₂O₃ and a “felted” matrix variant, with evidence of flow prior to the crystallization of tabular orthopyroxene. These melt glasses show chemical inhomogeneities on a microscopic scale, with areas of essentially SiO₂, even when appearing optically homogeneous. They are similar in bulk composition for major elements, but the felted matrix variant is ～5×more enriched in Ni, Co and Cr, the interelement ratios of which are indicative of an admixture of a chondritic projectile. Mixing models suggest that the glassy impact melt rocks can be made from the target rocks in the proportions: ～55% Gowganda wacke, ～42% Serpent arkose and ～3% Nipissing intrusives. Geologic reconstructions suggest that this is a reasonable mixture of potential target rocks at the time of impact.     

Identification of the Bloody Creek structure,a possible impact crater in southwestern Nova Scotia,Canada

Abstract— An approximately 0.4 km diameter elliptical structure formed in Devonian granite in southwestern Nova Scotia, herein named the Bloody Creek structure (BCS), is identified as a possible impact crater. Evidence for an impact origin is based on integrated geomorphic, geophysical, and petrographic data. A near‐continuous geomorphic rim and a 10 m deep crater that is infilled with lacustrine sediments and peat define the BCS. Ground penetrating radar shows that the crater has a depressed inner floor that is sharply ringed by a 1 m high buried scarp. Heterogeneous material under the floor, interpreted as deposits from collapse of the transient cavity walls, is overlain by stratified and faulted lacustrine and wetland sediments. Alteration features found only in rim rocks include common grain comminution, polymict lithic microbreccias, kink‐banded feldspar and biotite, single and multiple sets of closely spaced planar microstructures (PMs) in quartz and feldspar, and quartz mosaicism, rare reduced mineral birefringence, and chlorite showing plastic deformation and flow microtextures. Based on their form and crystallographic orientations, the quartz PMs consist of planar deformation features that document shock‐metamorphic pressures ≤25 GPa. The age of the BCS is not determined. The low depth to diameter ratio of the crater, coupled with anomalously high shock‐metamorphic pressures recorded at its exposed rim, may be a result of significant post‐impact erosion. Alternatively, impact onto glacier ice during the waning stages of Wisconsinian deglaciation (about 12 ka BP) may have resulted in dissipation of much impact energy into the ice, resulting in the present morphology of the BCS.     

Shock deformation confirms the impact origin for the Cerro do Jarau,Rio Grande do Sul,Brazil, structure

Cerro do Jarau is a conspicuous, circular morpho‐structural feature in Rio Grande do Sul State (Brazil), with a central elevated core in the otherwise flat “Pampas” terrain typical for the border regions between Brazil and Uruguay. The structure has a diameter of approximately 13.5 km. It is centered at 30^o12′S and 56^o32′W and was formed on basaltic flows of the Cretaceous Serra Geral Formation, which is part of the Paraná‐Etendeka Large Igneous Province (LIP), and in sandstones of the Botucatu and Guará formations. The structure was first spotted on aerial photographs in the 1960s. Ever since, its origin has been debated, sometimes in terms of an endogenous (igneous) origin, sometimes as the result of an exogenous (meteorite impact) event. In recent years, a number of studies have been conducted in order to investigate its nature and origin. Although the results have indicated a possible impact origin, no conclusive evidence could be produced. The interpretation of an impact origin was mostly based on the morphological characteristics of the structure; geophysical data; as well as the occurrence of different breccia types; extensive deformation/silicification of the rocks within the structure, in particular the sandstones; and also on the widespread occurrence of low‐pressure deformation features, including some planar fractures (PFs). A detailed optical microscopic analysis of samples collected during a number of field campaigns since 2007 resulted in the disclosure of a large number of quartz grains from sandstone and monomict arenite breccia from the central part of the structure with PFs and feather features (FFs), as well as a number of quartz grains exhibiting planar deformation features (PDFs). While most of these latter grains only carry a single set of PDFs, we have observed several with two sets, and one grain with three sets of PDFs. Consequently, we here propose Cerro do Jarau as the seventh confirmed impact structure in Brazil. Cerro do Jarau, together with Vargeão Dome (Santa Catalina state) and Vista Alegre (Paraná State), is one of very few impact structures on Earth formed in basaltic rocks.     

Melting and cataclastic features in shatter cones in basalt from the Vista Alegre impact structure,Brazil

Shatter cones are one of the most widely recognized pieces of evidence for meteorite impact events on Earth, but the process responsible for their formation is still debated. Evidence of melting on shatter cone surfaces has been rarely reported in the literature from terrestrial impact craters but has been recently observed in impact experiments. Although several models for shatter cones formation have been proposed, so far, no one can explain all the observed features. Shatter cones' from the Vista Alegre impact structure, Brazil, formed in fine‐grained basalt of the Jurassic‐Cretaceous Serra Geral Formation (Paraná large igneous province). A continuous quenched melt film, consisting of a crystalline phase, mica, and amorphous material, decorates the striated surface. Ultracataclasites, containing subrounded pyroxene clasts in an ultrafine‐grained matrix, occur subparallel to the striated surface. Several techniques were applied to characterize the crystalline phase in the melt, including Raman spectroscopy and transmission electron microscopy. Results are not consistent with any known mineral, but they do suggest a possible rare or new type of clinopyroxene. This peculiar evidence of melting and cataclasis in relation with shatter cone surfaces is interpreted as the result of tensile fracturing at the tip of a fast propagating shock‐induced rupture, which led to the formation of shatter cones at the tail of the shock front, likely during the early stage of the impact events.     

Geophysical signature of the Pretoria Saltpan impact structure and a possible satellite crater

Abstract— The genesis of the 1.13-km-diameter Pretoria Saltpan crater has long been the focus of a controversy. Its origin has been explained by either meteorite impact or “cryptoexplosive” volcanic activity, but it was recently confirmed, through detailed petrographic and chemical analysis of a breccia layer forming part of the crater fill, that the crater was formed by impact. As the limited previous geophysical work failed to support an impact origin, a more detailed gravity and magnetic study was conducted. A possible 400-m-diameter circular crater located 3 km to the southwest of the main crater was also investigated with geophysical methods, including resistivity, seismics and ground-probing radar. The gravity signature of the main crater is compatible with that of a simple impact crater and the magnetic signature (no magnetic anomaly could be detected) rules out the possibility of a central magnetic volcanic body below the crater-fill sediments. The results for the possible twin or satellite crater are inconclusive. As it is the only such feature in the entire region, it should not be overlooked. A drilling program may reveal interesting results.     

Incipient melt formation and devitrification at the Wanapitei impact structure,Ontario, Canada

Abstract— The Wanapitei impact structure is ～8 km in diameter and lies within Wanapitei Lake, ～34 km northeast of the city of Sudbury. Rocks related to the 37 Ma impact event are found only in Pleistocene glacial deposits south of the lake. Most of the target rocks are metasedimentary rocks of the Proterozoic Huronian Supergroup. An almost completely vitrified, inclusion-bearing sample investigated here represents either an impact melt or a strongly shock metamorphosed, pebbly wacke. In the second, preferred interpretation, a number of partially melted and devitrified clasts are enclosed in an equally highly shock metamorphosed arkosic wacke matrix (i.e., the sample is a shocked pebbly wacke), which records the onset of shock melting. This interpretation is based on the glass composition, mineral relicts in the glass, relict rock textures, and the similar degree of shock metamorphism and incipient melting of all sample components. Boulder matrix and clasts are largely vitrified and preserve various degrees of fluidization, vesiculation, and devitrification. Peak shock pressure of ～50–60 GPa and stress experienced by the sample were somewhat below those required for complete melting and development of a homogeneous melt. The rapid cooling and devitrification history of the analyzed sample is comparable to that reported recently from glasses in the suevite of the Ries impact structure in Germany and may indicate that the analyzed sample experienced an annealing temperature after deposition of somewhere between 650 °C and 800 °C.     

Hydrothermal alteration at the Lonar Lake impact structure,India: Implications for impact cratering on Mars

Abstract— The 50,000 year old, 1.8 km diameter Lonar crater is one of only two known terrestrial craters to be emplaced in basaltic target rock (the 65 million year old Deccan Traps). The composition of the Lonar basalts is similar to martian basaltic meteorites, which establishes Lonar as an excellent analogue for similarly sized craters on the surface of Mars. Samples from cores drilled into the Lonar crater floor show that there are basaltic impact breccias that have been altered by post‐impact hydrothermal processes to produce an assemblage of secondary alteration minerals. Microprobe data and X‐ray diffraction analyses show that the alteration mineral assemblage consists primarily of saponite, with minor celadonite, and carbonate. Thermodynamic modeling and terrestrial volcanic analogues were used to demonstrate that these clay minerals formed at temperatures between 130°C and 200°C. By comparing the Lonar alteration assemblage with alteration at other terrestrial craters, we conclude that the Lonar crater represents a lower size limit for impact‐induced hydrothermal activity. Based on these results, we suggest that similarly sized craters on Mars have the potential to form hydrothermal systems, as long as liquid water was present on or near the martian surface. Furthermore, the Fe‐rich alteration minerals produced by post‐impact hydrothermal processes could contribute to the minor iron enrichment associated with the formation of the martian soil.     

Insights about the formation of a complex impact structure formed in basalt from numerical modeling: The Vista Alegre structure,southern Brazil

We present the outcomes of simulations of the formation of the Vista Alegre impact structure, Paraná Basin, Brazil. The target comprised a thick sequence of volcanic rocks of predominantly basaltic composition of the Serra Geral Formation that had been deposited on top of sedimentary rocks (sandstones) of the Pirambóia/Botucatu formations. The cratering process was modeled using the iSALE shock physics code. Our best‐fit model suggests that (1) the crater was originally ~10 km in size; (2) it was formed in ~115 s by a stony projectile of 1000 m in diameter, for an assumed impact velocity of 12 km s^?1; (3) target rocks underwent a peak pressure of ~20 GPa, in agreement with previous petrographic investigations of shock deformation. Furthermore, the model points out that the sedimentary strata below the layer of volcanic rocks were raised by ~650 meters at the central part of the crater, which resulted in the current partial exposure of the sandstones at the surface. The outcomes of our modeling suggest that parameters like cohesion and strength of the target rocks, after shock compression, determined the final morphology of the crater, especially the absence of a topographically prominent central peak. Finally, the results of the numerical modeling are roughly in agreement with gravity data over the structure, in particular with respect to the presence of the uplifted sedimentary strata, which are responsible for a low gravity signature at the center of the structure.     

Petrography and geochemistry of the impact to postimpact transition layer at the El'gygytgyn impact structure in Chukotka,Arctic Russia

The 3.6 Ma El'gygytgyn impact structure, located in northeast Chukotka in Arctic Russia, was largely formed in acidic volcanic rocks. The 18 km diameter circular depression is today filled with Lake El'gygytgyn (diameter of 12 km) that contains a continuous record of lacustrine sediments of the Arctic from the past 3.6 Myr. In 2009, El'gygytgyn became the focus of the International Continental Scientific Drilling Program (ICDP) in which a total of 642.4 m of drill core was recovered. Lithostratigraphically, the drill cores comprise lacustrine sediment sequences, impact breccias, and deformed target rocks. The impactite core was recovered from 316.08 to 517.30 meters below lake floor (mblf). Because of the rare, outstanding recovery, the transition zone, ranging from 311.47 to 317.38 m, between the postimpact lacustrine sediments and the impactite sequences, was studied petrographically and geochemically. The transition layer comprises a mixture of about 6 m of loose sedimentary and volcanic material containing isolated clasts of minerals and melt. Shock metamorphic effects, such as planar fractures (PFs) and planar deformation features (PDFs), were observed in a few quartz grains. The discoveries of silica diaplectic glass hosting coesite, kinked micas and amphibole, lechatelierite, numerous impact melt shards and clasts, and spherules are associated with the impact event. The occurrence of spherules, impact melt clasts, silica diaplectic glass, and lechatelierite, about 1 m below the onset of the transition, marks the beginning of the more coherent impact ejecta layer. The results of siderophile interelement ratios of the transition layer spherules give indications of the relative contribution of the meteoritical component.     

The evolution of the Onaping Formation at the Sudbury impact structure

Abstract– The 1.4–1.6 km thick Onaping Formation consists of a complex series of breccias and “melt bodies” lying above the Sudbury Igneous Complex (SIC) at the Sudbury impact structure. Based on the presence of shocked lithic clasts and various “glassy” phases, the Onaping has been described as a “suevitic” breccia, with an origin, at least in part, as fallback material. Recent mapping and a redefined stratigraphy have emphasized similarities and differences in its various vitric phases, both as clast types and discrete intrusive bodies. The nature of the Onaping and that of other “suevitic” breccias overlying impact melt sheets is reviewed. The relative thickness, internal stratigraphic and lithological character, and the relative chronology of depositional units indicate multiple processes were involved over some time in the formation of the Onaping. The Sudbury structure formed in a foreland basin and water played an essential role in the evolution of the Onaping, as indicated by a major hydrothermal system generated during its formation. Taken together, observations and interpretations of the Onaping suggest a working hypothesis for the origin of the Onaping that includes not only impact but also the interaction of sea water with the impact melt, resulting in repeated explosive interactions involving proto‐SIC materials and mixing with pre‐existing lithologies. This is complicated by additional brecciation events due to the intrusion of proto‐SIC materials into the evolving and thickening Onaping. Fragmentation mechanisms changed as the system evolved and involved vesiculation in the formation of the upper two‐thirds of the Onaping.     

The origin of carbonates in impact melt-bearing breccias from Site M0077 at the Chicxulub impact structure,Mexico

Carbonates from the impact melt-bearing breccia in the 2016 IODP/ICDP Expedition 364 drill core at Site M0077 were systematically documented and characterized petrographically and geochemically. Calcite, the only carbonate mineral present, is abundant throughout this deposit as five distinct varieties: (1) subangular carbonate clasts (Type A); (2) subround/irregular carbonate clasts with clay altered rims (Type B); (3) fine-crystalline matrix calcite (Type C); (4) void-filling sparry calcite (Type D); and (5) microcrystalline carbonate with flow textures (Type E). Quantitative geochemical analysis shows that calcite in all carbonate varieties are low in elemental impurities (<2.0 cumulative wt% on average); however, relative concentrations of MgO and MnO vary, which provides distinction between each variety: MgO is highest in calcite from Types A, B, and C carbonates (0.2–0.8 wt% on average); MnO is highest in calcite from Types B, C, and D carbonates (0.2–1.3 wt% on average); and calcite from Type E carbonate is most pure (<0.1 wt% on average MgO and MnO, cumulatively). Based on textural and geochemical variations between carbonate types, we interpret that some of the carbonate target rocks melted during impact and were immiscible within the silicate-dominated melt sheet prior to the resurgence of seawater. Type B clasts were formed by molten fuel–coolant interaction, as the incoming seawater eroded through the melt sheet and encountered carbonate melt (Type E). Post-impact meteoric-dominated hydrothermal activity produced the Mn-elevated calcite from Type C and D carbonates, and altered the Type B clasts to be elevated in Mn and host a clay-rich rim.     

Evidence for a spatially extensive hydrothermal system at the Ries impact structure,Germany

The ~15 Ma, 26 km diameter Ries impact structure in south‐central Germany was one of the first terrestrial impact structures where evidence of impact‐associated hydrothermal alteration was recognized. Previous studies suggested that pervasive, high‐temperature hydrothermal activity was restricted to the area within the “inner ring” (i.e., the crater‐fill impactite units). Here we present mineralogical evidence for localized hydrothermal activity in the ejecta beyond the crater rim in two previously unstudied settings: a pervasively altered lens of suevite ejecta directly overlying the Bunte Breccia at the Aumühle quarry; and suevite ejecta at depth overlain by ~20 m of lacustrine sediments sampled by the Wörnitzostheim 1965 drill core. A comprehensive set of X‐ray diffraction analyses indicates five distinct alteration regimes (1) surficial ambient weathering characterized by smectite and a minor illitic component; (2) locally restricted hydrothermal activity characterized by an illitic component and minor smectite; (3) hydrothermal activity at depth characterized by smectite, a minor illitic component, and calcite; (4) hydrothermal activity at depth characterized by smectite, a minor illitic component, calcite, zeolites, and clinochlore; and (5) pervasive hydrothermal activity at depth characterized by smectite, a minor illitic component, and minor clinochlore. These data spatially extend the Ries postimpact hydrothermal system suggesting a much more extensive, complex, and dynamic system than previously thought. Constraining the mineralogical alteration regimes at the Ries impact structure may also further our understanding of impact‐associated phyllosilicate formation on Mars with implications for climate models and habitability.     

Through the impact glass: Insight into the evolution of melt at the Mistastin Lake impact structure

By analyzing impact glass, the evolution of the impact melt at the Mistastin Lake impact structure was investigated. Impact glass clasts are present in a range of impactites, including polymict breccias and clast‐rich impact melt rock, and from a variety of settings within the crater. From the glass clasts analyzed, three petrographic subtypes of impact glass were identified based on their clast content, prevalence of schlieren, color, texture, and habit. Several alteration phases were also observed replacing glass and infilling vesicles; however, textural observations and quantified compositional data allowed for the identification of pristine impact glass. Although the various types of glasses show significant overlap in their major oxide composition, several subtle variations in the major oxide chemistry of the glass were observed. To investigate this variation, a least‐squares mixing model was implemented utilizing the composition of the glass and the known target rock chemistry to model the initial melt composition. Additionally, image analysis of the glass clasts was used to investigate whether the compositional variations correlated to textural difference in the lithologies. We propose that the textural and compositional dichotomy observed is a product of the evolution, assimilation, and emplacement of the glass. The dichotomy is reflective of the melt either being ballistically emplaced (group 2 glasses: occurring in melt‐poor polymict breccias at lowermost stratigraphic position outside the transient crater) or the result of late‐stage melt flows (group 1 glasses, occurring in melt‐bearing polymict breccias and impact melt rocks at higher stratigraphic positions outside the transient crater).