Analysis of lateral rock spreading process initiation with a numerical modelling approach

The first erosional front of the south‐eastern Alps has been affected by several deep‐seated landslides. The movements affected a Jurassic limestone sequence underlain by an upper Trias unit (Keuper) mainly composed of marl and clays. Horst‐ and graben‐like structures, newly formed gravitational faults, outflow and other field evidence suggest that such movements are consistent with lateral rock spreading processes. An example of such processes is the ‘La Marbrière’ slope, where field investigations have revealed that three distinct zones corresponding to three evolutionary stages of movement exist. The question is: What are the structural and mechanical modifications undergone by the slope between those evolution stages? To tackle this question, numerical models based on a 2D cross section of the ‘La Marbrière’ slope have been performed. Results show that, to fit the structural evidence of the precollapse situation, elasto‐plastic behaviour of the Trias Keuper unit is needed. The transition between the precollapse and fresh post‐collapse situations requires a modification of the mechanical behaviour of the Trias Keuper unit to Burger type, resulting in the formation of antithetic and synthetic gravitational faults (producing a graben‐like structure).     

Half‐a‐billion‐year‐old microscopic treasures—the Cambrian ‘Orsten’ fossils of Sweden

The creatures that gaze back at us through the binocular microscope are so uniquely well‐preserved and life‐like that had we not known better we would have thought that they were modern. Instead they are half‐a‐billion‐year‐old arthropods extracted from Cambrian rocks of Sweden. The microscopic fossils, colloquially known as the ‘Orsten’ fossils, are now world‐famous and basking in the light of the research catwalk since their discovery in the 1970s. These fossils have provided significant insight into the long lost Cambrian biotas and early animal evolution.     

The Isle of Portland,Dorset, England

The Isle of Portland is one of the jewels in the crown of the ‘Jurassic Coast’ of Dorset, southern England. Thomas Hardy aptly described this limestone peninsula as the ‘Gibraltar of Wessex’, and used its stone quarries as the backdrop for one of his novels (The Well‐Beloved). Quarries then, as now, work the world‐famous Portland Stone—a Jurassic oolitic limestone—from which St Paul's Cathedral and many other well‐known buildings are constructed. Rocks exposed in the numerous disused quarries scattered across the isle, together with exposures in spectacular sea‐cliffs, paint a vivid picture of life and environments, ～150 million years ago. In addition to Jurassic patch‐reefs, coastal sabhkas, fossil forests and dinosaur footprints found in the bedrock, more recent geological phenomena include two Quaternary raised beaches, solution caves filled with vertebrates, and massive coastal landslips. The aim of this article is to provide a field guide for those wishing to explore the geology of this little‐known region for themselves.     

The Middle–Late Jurassic forced regression and disconformity in central Portugal: eustatic, tectonic and climatic effects on a carbonate ramp system

Abstract Successions across the Middle–Upper Jurassic disconformity in the Lusitanian Basin (west‐central Portugal) are highly varied, and were probably developed on a large westward‐inclined hangingwall of a half‐graben. The disconformity is preceded by a complex forced regression showing marked variations down the ramp, and provides an example of the effects of rapid, relative sea‐level falls on carbonate ramp systems. In the east, Middle Jurassic inner ramp carbonates (‘Candeeiros’ facies) are capped by a palaeokarstic surface veneered by ferruginous clays or thick calcretes. In the west, mid‐outer ramp marls and limestones (‘Brenha’ facies) are terminated by two contrasting successions: (1) a sharp‐based carbonate sandbody capped by a minor erosion surface, overlain by interbedded marine–lagoonal–deltaic deposits with further minor erosion/exposure surfaces; (2) a brachiopod‐rich limestone with a minor irregular surface, overlain by marls, lignitic marls with marine and reworked non‐marine fossils and charophytic limestones, with further minor irregular surfaces and capped by a higher relief ferruginous erosional surface. The age ranges from Late Bathonian in the east to Late Callovian in the west. This disconformity assemblage is succeeded by widespread lacustrine–lagoonal limestones with microbial laminites and evaporites (‘Cabaços’ facies), attributed to the Middle Oxfordian. Over the whole basin, increasingly marine facies were deposited afterwards. In Middle Jurassic inner‐ramp zones in the east, the overall regression is marked by a major exposure surface overlain by continental sediments. In Middle Jurassic outer‐ramp zones to the west, the regression is represented initially by open‐marine successions followed by either a sharp marine erosion surface overlain by a complex sandbody or minor discontinuities and marginal‐marine deposits, in both cases capped by the major lowstand surface. Reflooding led to a complex pattern of depositional conditions throughout the basin, from freshwater and brackish lagoonal to marginal‐ and shallow‐marine settings. Additional complications were produced by possible tilting of the hangingwall of the half‐graben, the input of siliciclastics from westerly sources and climate change from humid to more seasonally semi‐arid conditions. The Middle–Late Jurassic sea‐level fall in the Lusitanian Basin is also recorded elsewhere within the Iberian and other peri‐Atlantic regions and matches a transgressive to regressive change in eustatic sea‐level curves, indicating that it is related in part to a global event.     

Last Interglacial peopling of Siberia: the Middle Palaeolithic site Ust''-Izhul'', the upper Yenisei area

Multidisciplinary Quaternary investigations in the Minusinsk Basin in the upper Yenisei River region and other southern Siberian continental depressions have produced evidence of prehistoric peopling pre‐dating the last glacial stage (>100 ka BP). Abundant ‘pebble tools’ and bone artefacts exposed from eroded alluvia of the Yenisei River terraces indicate repeated occupation of this territory since the Middle Pleistocene. A new stage of expansion of the early human occupation habitat occurred around the last interglacial (OIS 5e) by a Middle Palaeolithic (Neanderthaloid?) population characterized by a core and flake stone industry and open‐air occupation sites. The key camp/kill‐processing site at Ust‘‐Izhul’, dated to c. 125 ka BP and documenting complex behavioural activities, is so far the most complete in situ pre‐Late Palaeolithic site found in Siberia. This unique record provides new insights into the timing and the palaeoenvironmental conditions of the Pleistocene colonization of north‐central Asia.     

Calcite uranium–lead geochronology applied to hardground lithification and sequence boundary dating

Hardground discontinuities within carbonate platforms form important stratigraphic surfaces which can be used at basin scale to correlate sequence boundaries. Although these surfaces are commonly used in sequence strati‐graphy, the timing and duration of hardground lithification and the crystallization of early cements remain unexplored. Here, early calcite cements were dated by U‐Pb geochronology for five Jurassic hardgrounds, interpreted as third‐order sequence boundaries, situated within a well‐constrained petrographic, sedimentological and stratigraphic framework. The consistency or the slight deviation between the age of the cements and the stratigraphic age of deposition of the formations illustrate that cementation occurred early in the diagenetic history. The ages obtained on dogtooth cements, replacing aragonite in gastropod shells and pendant cements in intergranular spaces, match those of the standard Jurassic biostratigraphic ammonite Zones, making calcite U‐Pb geochronology a promising method for dating third‐order sequence boundaries of depositional sequences and refining the Jurassic time scale in the future.     

‘Boninitic’ clasts from the Mesozoic olistostromes and turbidites of Angelokastron (Argolis,Greece)

The Lower Unit of the ophiolitic sequence of Northern Argolis comprises turbiditic sediments and olistostromes, both containing ophiolitic clasts, mainly crystal fragments (clinopyroxene, plagioclase, Cr-spinel, amphibole) in the turbidites and cumulitic intrusives (quartz noritic amphibole-bearing gabbros), subvolcanic rocks (dolerites) and various effusive lithologies (mainly Si-rich basalts to basaltic andesites) in the olistostromes. The volcanic rocks belong to three groups. In rare cases the lavas are mineralogically and chemically comparable with MORB; most of them, and the subvolcanic rocks, contain primary quartz and amphibole, orthopyroxene, Ca-rich plagioclase and clinopyroxene±Cr-spinels. All rocks are Si- and Mg-rich and have high concentrations of ‘compatible’ and very low concentrations of ‘incompatible’ elements. The REE profiles are characteristically U-shaped. Many of the observed features are comparable with those of subduction-related lavas and, in particular, with present day boninites and ophiolitic boninitic rocks. The gabbroic rocks have mineralogical and chemical analogies with the dolerites and lavas, thus it may be argued that the gabbros represent the intrusive counterparts of the ‘boninitic’ volcanic clasts. The mineral clasts occurring in the turbidites are chemically comparable with those analysed in the ophiolitic clasts of the overlying olistostrome. It may be concluded that the ophiolitic clasts of both olistostromes and turbidites were derived from a subduction-related sequence. An island arc–back-arc system might explain the occurrence of both boninitic and MORB-type lithologies in the olistostrome of Angelokastron. This may support the hypothesis of the onset of compressive tectonics along the Pindos Ocean during the Jurassic. © 1996 John Wiley & Sons, Ltd.     

Genesis and Age Constraints on Gold Deposits of the Daerae Mine, Sangju Area, Central-Northern Sobaegsan Massif, Korea

Abstract: Gold mineralization of the Daerae mine represents the first recognized example of the Jurassic gold mineralization in the Sangju area, Korea. It occurs as a single stage of quartz veins that fill fault fractures in Precambrian gneiss of the central‐northern Sobaegsan Massif. The mineralogical characteristics of quartz veins, such as the simple mineralogy and relatively gold‐rich (65–72 atomic % Au) nature of electrum, as well as the CO₂–rich and low salinity nature of fluid inclusions, are consistent with the ‘mesothermal‐type’ gold deposits previously recognized in the Youngdong area (about 50 km southwest of the Sangju area). Ore fluids were evolved mainly through CO₂ immiscibility at temperatures between about 250 and 325 C. Vein sulfides characteristically have negative sulfur isotopic values (–1.9 to +0.2 %), which have been very rarely reported in South Korea, and possibly indicate the derivation of sulfur from an ilmenite‐series granite melt. The calculated O and H isotopic compositions of hydrothermal fluids at Daerae (δ¹⁸O_water = +5.2 to +5.9 %; δD_water = –59 to –67 %) are very similar to those from the Youngdong area, and indicate the important role of magmatic water in gold mineralization. The ⁴⁰Ar–³⁹Ar age dating of a pure alteration sericite sample yields a high‐temperature plateau age of 188.3 0.1 Ma, indicating an early Jurassic age for the gold mineralization at Daerae. The lower temperature Ar‐Ar plateau defines an age of 158.4 2.0 Ma (middle Jurassic), interpreted as reset by a subsequent thermal effect after quartz vein formation. The younger plateau age is the same as the previously reported K‐Ar ages (145–171 Ma) for the other ‘mesothermal–type’ gold deposits in the Youngdong and Jungwon areas, Korea, which are too young in view of the new Jurassic Ar‐Ar plateau age (around 188 Ma).     

Origin,characteristics and distribution of fault‐related and fracture‐related dolomitization: Insights from Mississippian carbonates,Isle of Man

Viséan limestones on the Isle of Man host numerous examples of fault‐controlled and fracture‐controlled dolomitization, which have been investigated to determine their macro‐scale to micro‐scale characteristics, geofluid origin, timing and relation to basin evolution. Geobodies composed of fabric destructive, ferroan, non‐planar dolomite range from several centimetres to >300 m wide and tens to hundreds of metres long parallel to faults and/or fractures; they have sharply defined margins, cross‐cut stratigraphy and locally finger out along beds or bed boundaries for tens of metres. Larger geobodies accompany NNE–SSW extensional faults with substantial breccia zones. One of these bodies hosts a sphalerite‐rich breccia deposit cemented by dolomite. Saddle dolomite lines or fills vugs and fractures within dolomite geobodies, and is a minor late diagenetic phase in undolomitized limestones. Replacive dolomite has low matrix porosity owing to non‐planar texture and associated cementation, and there is no evidence for subsequent leaching. Three dolomite stages are discriminated by texture, cathodoluminescence petrography and electron microscopy. Disseminated ‘Dolomite 1’ is substantially replaced and may be residual early diagenetic dolomite. Pervasive ‘Dolomite 2’ and ‘Dolomite 3’ have overlapping carbon–oxygen–strontium isotopic and fluid‐inclusion characteristics that indicate precipitation from allochthonous, high‐temperature (98 to 223°C) and high‐salinity (15 to 24 wt% NaCl eq.) brines. These variably equilibrated with host limestones and mixed with resident pore fluids. Overlying mudrocks formed a seal for ascending fluids. Integration of data from the mineral deposit suggests that fault‐fracture systems tapped different deep‐seated fluid reservoirs at different temperatures, and implies fluid interactions with both metamorphic basement and sedimentary cover in large‐scale circulation systems. This phenomenon probably took place during Mesozoic rifting, although an earlier event at the end of the Early Carboniferous cannot be discounted. In either case, a transient heat flow anomaly, previously unrecognized in the Irish Sea region, may be required to account for the hottest fluids.     

The Late Jurassic Tithonian, a greenhouse phase in the Middle Jurassic–Early Cretaceous 'cool' mode: evidence from the cyclic Adriatic Platform, Croatia

Well‐exposed Mesozoic sections of the Bahama‐like Adriatic Platform along the Dalmatian coast (southern Croatia) reveal the detailed stacking patterns of cyclic facies within the rapidly subsiding Late Jurassic (Tithonian) shallow platform‐interior (over 750 m thick, ca 5–6 Myr duration). Facies within parasequences include dasyclad‐oncoid mudstone‐wackestone‐floatstone and skeletal‐peloid wackestone‐packstone (shallow lagoon), intraclast‐peloid packstone and grainstone (shoal), radial‐ooid grainstone (hypersaline shallow subtidal/intertidal shoals and ponds), lime mudstone (restricted lagoon), fenestral carbonates and microbial laminites (tidal flat). Parasequences in the overall transgressive Lower Tithonian sections are 1–4·5 m thick, and dominated by subtidal facies, some of which are capped by very shallow‐water grainstone‐packstone or restricted lime mudstone; laminated tidal caps become common only towards the interior of the platform. Parasequences in the regressive Upper Tithonian are dominated by peritidal facies with distinctive basal oolite units and well‐developed laminate caps. Maximum water depths of facies within parasequences (estimated from stratigraphic distance of the facies to the base of the tidal flat units capping parasequences) were generally <4 m, and facies show strongly overlapping depth ranges suggesting facies mosaics. Parasequences were formed by precessional (20 kyr) orbital forcing and form parasequence sets of 100 and 400 kyr eccentricity bundles. Parasequences are arranged in third‐order sequences that lack significant bounding disconformities, and are evident on accommodation (Fischer) plots of cumulative departure from average cycle thickness plotted against cycle number or stratigraphic position. Modelling suggests that precessional sea‐level changes were small (several metres) as were eccentricity sea‐level changes (or precessional sea‐level changes modulated by eccentricity), supporting a global, hot greenhouse climate for the Late Jurassic (Tithonian) within the overall ‘cool’ mode of the Middle Jurassic to Early Cretaceous.     

Modelling grain‐recycling zoning during metamorphism

Chemical zoning, recorded by grain growth during metamorphism, is a key source of information about P–T–t paths. Interpretation of these data must be carried out using appropriate models and recognizing their inherent assumptions. To assist with defining how zoned minerals form, a set of geometric criteria for three types of chemical zoning developed in minerals (diffusion, growth and grain recycling) is outlined. Re‐equilibration of minerals by lattice diffusion causes zoning if the re‐equilibration is incomplete. Growth of porphyroblasts is commonly considered in pelites, but in metagranitoids, large monophase domains undergo coarsening by recycling of material from one grain to another as grain boundaries migrate driven by surface energy. This type of grain size increase is termed here ‘grain recycling’. Zoning developed during grain recycling due to equilibration of the recycled material with grain‐boundary chemistry is termed ‘grain‐recycling zoning’. Furthermore, short lattice diffusion lengths relative to grain sizes cause metamorphic fractionation because material in the grain cores is not in communication thermodynamically with the rest of the rock. A new model is derived for this sort of grain size increase coupled with metamorphic reactions using Theriak–Domino. An example is given of plagioclase undergoing an increase in anorthite content as epidote breaks down during amphibolite facies metamorphism of a metagranitoid. Agreement between naturally occurring zoning profiles and those derived from modelled P–T–t paths shows that this model can be used to extract metamorphic conditions from rocks which are not accessible using conventional thermobarometry.     

Exploring an Ediacaran ‘nursery’: growth,ecology and evolution in a rangeomorph palaeocommunity

The recent discovery of a fossilized assemblage of juvenile Ediacaran rangeomorph macro‐organisms, fern‐like impressions from the Drook Formation of Newfoundland, suggests that the morphological diversity present within the earliest known communities of the Ediacaran biota was relatively high. The fledgling population of these Proterozoic organisms was smothered by volcanic material from a nearby eruption, preserving the standing community on the seafloor. As many as six different genera are identified, present less than three million years after the end of the Gaskiers glacial event. This hints at a hidden evolutionary history for these organisms that is yet to be discovered. Co‐occurring filamentous impressions, and other fossils interpreted to represent the remains of decayed and ‘effaced’ organisms, suggest that the bedding plane exhibits unusual ecological completeness, with the assemblage as a whole documenting an early example of secondary community succession. Discoveries such as this reveal the potential for high‐quality preservation of soft‐bodied Ediacaran organisms in siliciclastic successions, and provide valuable insights into rangeomorph development and palaeoecology.     

Fossil ‘treasure trove’ found in British Geological Survey vaults

The British Geological Survey is home to more than three million fossils collected over two centuries and catalogued with enormous precision. However, as generations of curators have come and gone, a few collections have lain forgotten and their significance has gradually passed out of memory. Six months ago, I pulled opened some drawers marked ‘unregistered fossil plants’ in one of the Survey's windowless vaults in Keyworth, in central England. What I found inside made my jaw drop. Contained within were hundreds of beautiful thin sections of fossil wood dating from the early nineteenth century. The collection was assembled by botanist Joseph Hooker (Darwin's best friend) while he was briefly employed by the Survey in 1846. The material includes some of the first thin sections ever made by William Nicol, the pioneer of petrography, in the late 1820s, as well as specimens picked up by Darwin and Hooker on their round‐the‐world voyages in the 1830s and 1840s. The collection is particularly interesting in the way it sheds light on the vibrant and sometimes murky world of early nineteenth century science. This is the story of these fascinating fossils.     

'Linked' debrites in sand-rich turbidite systems – origin and significance

Abstract The outer parts of a number of small Late Jurassic sandy deep‐water fans in the northern North Sea are dominated by the stacked deposits of co‐genetic sandy and muddy gravity flows. Sharp‐based, structureless and dewatered sandstone beds are directly overlain by mudclast breccias that are often rich in terrestrial plant fragments and capped by thin laminated sandstones, pseudonodular siltstones and mudstones. The contacts between the clast‐rich breccias and the underlying sandstones are typically highly irregular with evidence for liquefaction and upward sand injection. The breccias contain fragments (up to metre scale) of exotic lithologies surrounded by a matrix that is extremely heterogeneous and strewn with multiphase and variably sheared sand injections and scattered coarse and very coarse sand grains (often coarser than in the immediately underlying sand bed). Markov chain analysis establishes that the breccias consistently overlie sandstones, and the character of the breccias and their external contacts rule out a post‐depositional origin via in situ liquefaction, intrastratal flowage or bed amalgamation and disruption. The breccias are interpreted as debrites that rode on a water‐rich sand bed just deposited by a co‐genetic concentrated gravity current. As such, they are referred to as ‘linked debrites’ to distinguish them from debrites emplaced in the absence of a precursor sand bed. The distinction is important, because these linked debris flows can achieve significant mobility through entrainment of both water and sediment from beneath, and they ride on a low‐friction carpet of liquefied sand. This explains the paradox presented by fan fringes in which there are common debrites, when conventional thinking might predict that deposits of low‐concentration gravity currents should be more important here. In fact, evidence for transport by low‐concentration turbidity currents is rare in these systems. Several possible mechanisms might explain the formation of linked flows, but the ultimate source of both sandy and clast‐rich flow components must be in shallower water on the basin margin (the debrites are not triggered from distal slopes). Flow partitioning may have occurred by upslope erosion and retardation of the mudclast‐charged portion of an erosional sandy density current, partial flow transformation of a precursor debris flow and/or hydraulic segregation and reconcentration of the flaky clasts and carbonaceous matter during transport. Linked debrites are not restricted to small sand‐rich fans, and similar mechanisms may be responsible for the long runout of debris flows in other systems. The recognition of a distinct class of linked debrites is of wider importance for facies prediction, reservoir heterogeneity and even carbon fluxes and sequestration on continental margins.     

Evaluation of a numerical model of the British–Irish ice sheet using relative sea‐level data: implications for the interpretation of trimline observations

The glacial isostatic adjustment (GIA) of the British Isles is complex due to the interplay between local and non‐local signals. A number of recent studies have modelled the GIA response of the British Isles using relative sea‐level data. This study extends these previous analyses by using output from a numerical glaciological model as input to a GIA model. This is a necessary step towards more realistic GIA models, and although there have been similar studies for the major late Pleistocene ice sheets, this is the first study to do so for the British Isles. We test three reconstructions, classed as ‘minimal’, ‘median’ and ‘maximal’ in terms of their volume at maximum extent, and find it is possible to obtain good data–model fits. The minimal reconstruction is clearly preferred by the sea‐level data. The ice reconstructions tested were not constrained by geomorphological information of past ice extent (lateral and vertical). As a consequence, the reconstructions extend further than much of this information suggests, particularly in terms of ice thickness. It is notable, however, that the reconstructions produce good fits to many sea‐level data from central, mountainous regions (e.g. Scottish highlands), which lends support to the suggestion that trimlines, often used as an constraint on the palaeo ice surface location, are in fact features formed at the transition from warm‐ to cold‐based ice and so mark a minimum constraint on the ice surface altitude. Based on data–model misfits, suggestions are made for improving the ice model reconstructions. However, in many locations, the cause of the misfit could be due to non‐local, predominantly Fennoscandian ice and so interpretation is not straightforward. As a result, we suggest that future analyses of this type consider models and observations for both Fennoscandia and the British Isles. Copyright © 2012 John Wiley & Sons, Ltd.     

Mantle‐derived and crustal melts dichotomy in northern Greece: spatiotemporal and geodynamic implications

Two distinct groups of subduction‐related (orogenic) granitoid rocks, one Jurassic and the other Tertiary, occur in the area between the Vardar (Axios) Zone and the Rhodope Massif in northern Greece. The two groups of granitoids differ in many respects. The first group shows evolved geochemical characters, it is not associated with mafic facies, and evidence of magmatic interaction between mantle‐ and crustal‐derived melts is lacking. The second group has less evolved geochemical characters, it is associated with larger amount of mafic facies, and magmatic interaction processes between mantle‐derived and crustal melts are ubiquitous as evidenced by mafic microgranular enclaves and synplutonic dykes showing different enrichment in K₂O, Ti, and incompatible elements. This kind of magmatism can be attributed to the complex geodynamic evolution of the area. In particular, we suggest that two successive subduction events related to the closure of the Vardar and the Pindos oceans, respectively, occurred in the investigated area from Late Jurassic to Tertiary. We relate the genesis of Jurassic granitoids to the first subduction event, whereas Tertiary granitoids are associated with the second subduction. Fluids released by the two subducted slabs induced metasomatic processes generating a ‘leopard skin’ mantle wedge able to produce mafic melts ranging from typical calc‐alkaline to ultra‐potassic. Such melts interacted in various amounts with crustal calc‐alkaline anatectic melts to generate the wide spectrum of Tertiary granitoids occurring in the study area. Copyright © 2004 John Wiley & Sons, Ltd.     

The Berridale Wrench fault: A major structure in the Snowy Mountains of New South Wales

One of the most significant, but poorly understood, tectonic events in the east Lachlan Fold Belt is that which caused the shift from mafic, mantle‐derived calc‐alkaline/shoshonitic volcanism in the Late Ordovician to silicic (S‐type) plutonism and volcanism in the late Early Silurian. We suggest that this chemical/isotopic shift required major changes in crustal architecture, but not tectonic setting, and simply involved ongoing subduction‐related magmatism following burial of the pre‐existing, active intraoceanic arc by overthrusting Ordovician sediments during Late Ordovician — Early Silurian (pre‐Benambran) deformation, associated with regional northeast‐southwest shortening. A review of ‘type’ Benambran deformation from the type area (central Lachlan Fold Belt) shows that it is constrained to a north‐northwest‐trending belt at ca 430 Ma (late Early Silurian), associated with high‐grade metamorphism and S‐type granite generation. Similar features were associated with ca 430 Ma deformation in east Lachlan Fold Belt, highlighted by the Cooma Complex, and formed within a separate north‐trending belt that included the S‐type Kosciuszko, Murrumbidgee, Young and Wyangala Batholiths. As Ordovician turbidites were partially melted at ca 430 Ma, they must have been buried already to ～20 km before the ‘type’ Benambran deformation. We suggest that this burial occurred during earlier northeast‐southwest shortening associated with regional oblique folds and thrusts, loosely referred to previously as latitudinal or east‐west structures. This event also caused the earliest Silurian uplift in the central Lachlan Fold Belt (Benambran highlands), which pre‐dated the ‘type’ Benambran deformation and is constrained as latest Ordovician — earliest Silurian (ca 450–440 Ma) in age. The south‐ to southwest‐verging, earliest Silurian folds and thrusts in the Tabberabbera Zone are considered to be associated with these early oblique structures, although similar deformation in that zone probably continued into the Devonian. We term these ‘pre’‐ and ‘type’‐Benambran events as ‘early’ and ‘late’ for historical reasons, although we do not consider that they are necessarily related. Heat‐flow modelling suggests that burial of ‘average’ Ordovician turbidites during early Benambran deformation at 450–440 Ma, to form a 30 km‐thick crustal pile, cannot provide sufficient heat to induce mid‐crustal melting at ca 430 Ma by internal heat generation alone. An external, mantle heat source is required, best illustrated by the mafic ca 430 Ma, Micalong Swamp Igneous Complex in the S‐type Young Batholith. Modern heat‐flow constraints also indicate that the lower crust cannot be felsic and, along with petrological evidence, appears to preclude older continental ‘basement terranes’ as sources for the S‐type granites. Restriction of the S‐type batholiths into two discrete, oblique, linear belts in the central and east Lachlan Fold Belt supports a model of separate magmatic arc/subduction zone complexes, consistent with the existence of adjacent, structurally imbricated turbidite zones with opposite tectonic vergence, inferred by other workers to be independent accretionary prisms. Arc magmas associated with this ‘double convergent’ subduction system in the east Lachlan Fold Belt were heavily contaminated by Ordovician sediment, recently buried during the early Benambran deformation, causing the shift from mafic to silicic (S‐type) magmatism. In contrast, the central Lachlan Fold Belt magmatic arc, represented by the Wagga‐Omeo Zone, only began in the Early Silurian in response to subduction associated with the early Benambran northeast‐southwest shortening. The model requires that the S‐type and subsequent I‐type (Late Silurian — Devonian) granites of the Lachlan Fold Belt were associated with ongoing, subduction‐related tectonic activity.     

A multi‐system geochronology in the Ad‐3 borehole,Pannonian Basin (Hungary) with implications for dating volcanic rocks by low‐temperature thermochronology and for interpretation of (U–Th)/He data

Independent geochronological and thermal modelling approaches are applied to a biostratigraphically exceptionally well‐controlled borehole, Alcsútdoboz‐3 (Ad‐3), in order to constrain the age of Cenozoic geodynamic events in the western Pannonian Basin and to test the efficacy of the methods for dating volcanic rocks. Apatite fission track and zircon U–Pb data show two volcanic phases of Middle Eocene (43.4–39.0 Ma) and Early Oligocene (32.72 ± 0.15 Ma) age respectively. Apatite (U–Th)/He ages (23.8–14.8 Ma) and independent thermal and subsidence history models reveal a brief period of heating to 55–70 °C at ~17 Ma caused by an increased heat‐flow related to crustal thinning and mantle upwelling. Our results demonstrate that, contrary to common perception, the apatite (U–Th)/He method is likely to record ‘apparent’ or ‘mixed’ ages resulting from subsequent thermal events rather than ‘cooling’ or ‘eruption’ ages directly related to distinct geological events. It follows that a direct conversion of ‘apparent’ or ‘mixed’ (U‐Th)/He ages into cooling, exhumation or erosion rates is incorrect.     

Shallow-burial dolomite cement: a major component of many ancient sucrosic dolomites

Dolomite cement is a significant and widespread component of Phanerozoic sucrosic dolomites. Cements in dolomites that were never deeply buried are limpid, have planar faces (non‐saddle forms), often distinct zonation in cathodoluminescence and form syntaxial overgrowths on crystals facing pores. Five samples of sucrosic dolomites, interpreted as having had mostly lime‐mudstone or wackestone precursors in four carbonate aquifers, provide insights into the abundance of planar cements in sucrosic dolomites. Such cement comprises 11% to 45% (32% mean) of peritidal to sub‐tidal dolomites on an outcrop in the Edwards aquifer (Early Cretaceous) of central Texas; 19% to 33% (25% mean) of ramp dolomites in the Hawthorn Group (Oligo‐Miocene) and 50% to 70% in shelf dolomites of the Avon Park Formation (Eocene) in the Upper Floridan aquifer of sub‐surface peninsular Florida; 18% to 45% (32+% mean) of sub‐tidal shelf dolomites in quarry sections of the Burlington‐Keokuk Formation (Early Mississippian) in south‐eastern Iowa; and 18% to 76% (50% mean) in shallow cores and outcrops of outer‐shelf dolomites from the Gambier Limestone (Oligo‐Miocene) of South Australia. Backstripping the cement phases revealed by cathodoluminescence colour photomicrographs documents the effects of cements on textural coarsening, pore‐space reduction, induration and general ‘maturation’ of these dolomites. Most pre‐Holocene dolomites are multiphase crystalline rocks composed of: (i) seed crystals or ‘cores’; (ii) crystal cortices that concentrically enlarged the cores; and (iii) free‐space, syntaxial precipitates of limpid cement around the crystals. Remaining CaCO₃ grains and micrite can be replaced by dolomite, but typically they are dissolved between stages (ii) and (iii), creating systems of intercrystal and mouldic pores typical of sucrosic dolomites. Networks of cement overgrowths, aided by water‐filled pore systems under hydrostatic to lithostatic pressure, are judged to slow or prevent compaction in sucrosic dolomites. It can be argued that cortex growth involves both replacement of CaCO₃ particles and microcementation of their interparticle pores. This interpretation, and the abundance of cements in so many dolomites, would obviate the controversy over the volumetrics of ‘replacement dolomitization’. Limpid, planar and syntaxial dolomite cements of early diagenetic origin are interpreted to have precipitated from clear pore waters, at low temperatures (<30 to 35 °C) and shallow burial depths (<100 m), in water‐saturated networks of dolomite ‘silt’ and ‘sand’. Cements in many dolomites in island and continental–aquifer systems appear to result from event‐driven processes related to sea‐level highstands. Cementation events can follow ‘replacement dolomitization’ events by time intervals ranging from geologically ‘instantaneous’ to tens of million years.     

川黔南北向构造带古构造特征

川黔SN向构造带以单式或复式褶皱及相伴的断层组成。从晚古生代到侏罗纪地层全部卷入这个构造带,盖层构造明显受古构造控制。川黔SN向构造带基底具双层结构,下硬上软,带内SN向古隆拗开始于早寒武世,由南向北逐渐推进。