Heavy metals removal from synthetic wastewater by a novel nano-size composite adsorbent

The effects of varying operating conditions on metals removal from aqueous solution using a novel nano-size composite adsorbent are reported in this paper. Characterization of the composite adsorbent material showed successful production of carbon nanotubes on granular activated carbon using 1 % nickel as catalyst. In the laboratory adsorption experiment, initial mixed metals concentration of 2.0 mg/L Cu²⁺, 1.5 mg/L Pb²⁺ and 0.8 mg/L Ni²⁺ were synthesized based on metals concentration from samples collected from a semiconductor industry effluent. The effects of operation conditions on metals removal using composite adsorbent were investigated. Experimental conditions resulting in optimal metals adsorption were observed at pH 5, 1 g/L dosage and 60 min contact time. It was noted that the percentage of metals removal at the equilibrium condition varied for each metal, with lead recording 99 %, copper 61 % and nickel 20 %, giving metal affinity trend of Pb²⁺ > Cu²⁺ > Ni²⁺ on the adsorbent. Langmuir’s adsorption isotherm model gave a higher R² value of 0.93, 0.89 and 0.986 for copper, nickel and lead, respectively, over that of Freundlich model during the adsorption process of the three metals in matrix solution.     

Potentiality of open burnt clay as an adsorbent for the removal of Congo red from aqueous solution

Open burnt clay was studied as a potential adsorbent for the adsorption of Congo red (a reactive dye) from aqueous solution. The effect of contact time, pH, adsorbent dosage and temperature were studied. It was observed that the amount of Congo red retained increase with decreasing pH and increasing initial concentration. Removal percentage at pH 2 and 3 are almost same. The adsorption capacity of regenerated burnt clay was showed more than 98 % recovery of the adsorption efficiency of initial virgin adsorbent. The equilibrium data were described well by both Langmuir and Freundlich isotherm model. The adsorption capacity of some natural adsorbents, namely rice husk, wood charcoal, tea waste etc. were also investigated and compared with that of open burnt clay.     

Application of dried plant biomass as novel low-cost adsorbent for removal of cadmium from aqueous solution

Heavy metals are a threat to human health and ecosystem. These days, great deal of attention is being given to green technologies for purification of water contaminated with heavy metal ions. Biosorption is one among such emerging technologies, which utilizes naturally occurring waste materials to sequester heavy metals from wastewater. Cadmium has hazardous impact on living beings; therefore, its removal through green and economical process is an important task. The aim of the present study was to utilize the locally available Portulaca oleracea plant biomass as an adsorbent for cadmium removal from aqueous solution. The biomass was obtained after drying and grinding the portulaca leaves and stem. No chemical treatment was done on the adsorbent so that it remained green in a true sense. Batch experiments were performed at room temperature. The critical parameters studied were effects of pH, contact time, initial metal ion concentration and adsorbent dose on the adsorption of cadmium. The maximum adsorption was found to be 72 %. The kinetic data were found to best fit the pseudo-second-order equation. High adsorption rates were obtained in the initial 45 min, and adsorption equilibrium was then gradually achieved in about 100 min. Adsorption increased with increase in pH for a range 2 and 6. The equilibrium adsorption results closely followed both the Langmuir and Freundlich isotherms. The values of constants were calculated from isotherms. Results indicated that portulaca plant biomass could be developed as a potential material to be used in green water treatment devices for removal of metal ions.     

Evaluation of coal as adsorbent for phosphate removal

This paper reports the adsorption of phosphate ions on coal, charcoal, and coal ash. The influences of factors such as contact time, and initial adsorbate concentration have been studied. Adsorption of phosphate ions on virgin coal was significant compared to charcoal, coal and coal ash evacuated at 200°C. The significant adsorption capability of coal is due to the porosity as well as due to organic carbon and inorganic elements present in coal. The evacuation of coal proved to be ineffective in enhancing its capability for phosphate ions retention. The adsorption behaviors of all the three adsorbent used was conformed using Freundlich’s adsorption model. The results suggest that coal could be used as an efficient adsorbent for removing phosphate ions from wastewater.     

Efficient removal of hexavalent chromium from aqueous solutions using autohydrolyzed Scots Pine (Pinus Sylvestris) sawdust as adsorbent

In this work, a low-cost lignocellulosic adsorbent with high biosorption capacity is proposed, suitable for the efficient removal of hexavalent chromium from water and wastewater media. The adsorbent was produced by autohydrolyzing Scots Pine (Pinus Sylvestris) sawdust. The effect of the autohydrolysis conditions, i.e., pretreatment time and temperature, on hexavalent chromium biosorption was investigated using energy-dispersive X-ray spectroscopy (EDS) and UV–visible spectrophotometry. The Freundlich, Langmuir, Sips, Radke-Prausnitz, Modified Radke-Prausnitz, Tóth, UNILAN, Temkin and Dubinin-Radushkevich adsorption capacities and the rate constant values for pseudo-first- and pseudo-second-order kinetics indicated that the autohydrolyzed material exhibits significantly enhanced hexavalent chromium adsorption properties comparing with the untreated sawdust. The Freundlich’s adsorption capacity K _F increased from 2.276 to 8.928 (mg g^?1)(L mg^?1)^1/n , and the amount of hexavalent chromium adsorbed at saturation (Langmuir constant q _m) increased from 87.4 to 345.9 mg g^?1, indicating that autohydrolysis treatment at 240 °C for 50 min optimizes the adsorption behavior of the lignocellulosic material.     

Nettle ash as a low cost adsorbent for the removal of nickel and cadmium from wastewater

This study was focused on nettle ash as an alternative adsorbent for the removal of nickel (II) and cadmium (II) from wastewater. Batch experiments were conducted to determine the factors affecting adsorption of nickel (II) and cadmium (II). The adsorption process is affected by various parameters such as contact time, solution pH and adsorbent dose. The optimum pH required for maximum adsorption was found to be 6. The experimental data were tested using Langmuir, Freundlich and Tempkin equations. The data were fitted well to the Langmuir isotherm with monolayer adsorption capacity of 192.3 and 142.8 mg/g for nickel and cadmium, respectively. The adsorption kinetics were best described by the pseudo second order model. The cost of removal is expected to be quite low, as the adsorbent is cheap and easily available in large quantities. The present study showed that nettle ash was capable of removing nickel and cadmium ions from aqueous solution.     

Adsorptive removal of eight heavy metals from aqueous solution by unmodified and modified agricultural waste: tangerine peel

Analysis was carried out using tangerine peel aiming its use as a potential adsorbent of eight heavy metal ions (Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn) from aqueous solution. This agricultural waste was tested both in its untreated and also chemically modified form. Based on Fourier transformation infrared spectra, a comparison of biosorbent structure before and after chemical treatment was made. Batch adsorption tests were conducted at different pH and mass of sorbent to examine the influence on the effectiveness of simultaneous removal of tested ions. Kinetic studies were conducted at optimum pH 5.0 and sorbent dosage 300 mg. The pseudo-second-order kinetic model best fit the experimental data with high correlation coefficients (r² > 0.9997). By optimizing listed parameters, high removal efficiencies (> 89%) were achieved. According to the results obtained in this study, the remediation of water polluted with heavy metals could be done using modified tangerine peel as an agricultural waste material.     

Removal of hazardous hexavalent chromium from aqueous solution using divinylbenzene copolymer resin

This paper presents the removal of hazardous hexavalent chromium from liquid waste streams using divinylbenzene copolymer resin Amberlite IRA 96. Important sorption parameters such as contact time, pH, resin dosage and initial metal concentration were studied at 30?°C. The kinetic study was conducted using pseudo-first and pseudo-second-order kinetics at 30?°C. The sorption process was found to be pH dependent. Maximum removal was obtained at pH 2 under optimized conditions. The sorption process was rapid and 99?% of the removal was achieved in first 30?min. The equilibrium data were fitted to both Langmuir and Freundlich models. The better regression coefficient (R ²) in Freundlich model suggests the multilayer sorption process. The value of Gibbs free energy for sorption process was found to be ?12.394?kJmol^?1. The negative value indicated the spontaneity of the sorption process. Scanning electron microscope and energy dispersive X-ray spectroscopy studies were conducted to find the role of surface morphology during sorption process. The Fourier transform infrared study was conducted to identify the functional groups responsible for interaction between the resin and chromium. Desorption and regeneration studies were also carried out.     

A novel adsorbent for heavy metal remediation in aqueous environments

The objective of this study was to investigate the possibility of using maize tassel as an alternative adsorbent for the removal of chromium (VI) and cadmium (II) ions from aqueous solutions. The effect of pH, solution temperature, contact time, initial metal ion concentration and adsorbent dose on the adsorption of chromium (VI) and cadmium (II) by tassel was investigated using batch methods. Adsorption for both chromium (VI) and cadmium (II) was found to be highly pH dependent compared to the other parameters investigated. Obtained results gave an adsorption capacity of 79.1 % for chromium (VI) at pH 2, exposure time of 1h at 25 °C. Maximum capacity of cadmium of 88 % was obtained in the pH range of 5-6 at 25 °C after exposure time of 1 h. The adsorption capacities of tassel for both chromium (VI) and cadmium (II) were found to be comparable to those of other commercial adsorbents currently in use for the removal of heavy metals from aqueous wastes. These results have demonstrated the immense potential of maize tassel as an alternative adsorbent for toxic metal ions remediation in polluted water and wastewater.     

Efficiency of compost in the removal of heavy metals from the industrial wastewater

Authorities have been applying very strict regulations for the treatment of industrial wastewater recently because of the threatening level of the environmental pollution faced. Industrial wastewater containing heavy metals is a threat to the public health because of the accumulation of the heavy metals in the aquatic life which is transferred to human bodies through the food chain. Therefore, recently, researchers have been oriented toward the practical use of adsorbents for the treatment of wastewater polluted by heavy metals. The aim of this research was to determine the retention capacity of compost for copper, zinc, nickel and chromium. For this purpose, experiments in batch-mixing reactors with initial metal concentrations ranging from 100 to 1,000 mg/l were carried. It was also observed that compost could repeatedly be used in metal sorption processes. The experiments conducted indicated that compost has high retention capacities for copper, zinc and nickel, but not for chromium. Thus, compost has been approved as a potential sorbent for copper, zinc and nickel and may find place in industrial applications. Thus, solid waste which is another source of significant environmental pollution will be reduced by being converted into a beneficial product compost.     

Application of agricultural fibers in pollution removal from aqueous solution

Discharging different kinds of wastewater and polluted waters such as domestic, industrial and agricultural wastewaters into environment, especially to surface water, can cause heavy pollution of this body sources. With regard to increasing effluent discharge standards to the environment, high considerations should be made when selecting proper treatment processes. Any of chemical, biological and physical treatment processes have its own advantages and disadvantages. It should be kept in mind that economical aspects are important, too. In addition, employing environment-friendly methods for treatment is emphasized much more these days. Application of some waste products that could help in this regard, in addition to reuse of these waste materials, can be an advantage. Agricultural fibers are agricultural wastes and are generated in high amounts. The majority of such materials is generated in developing countries and, since they are very cheap, they can be employed as biosorbents in water and wastewater applications. Polluted surface waters, different wastewaters and partially treated wastewater may be contaminated by heavy metals or some organic matters and these waters should be treated to reduce pollution. The results of investigations show high efficiency of agricultural fibers in heavy metal and phenol removal. In this paper, some studies conducted by the author of this article and other investigators are reviewed.     

Survey efficiency of electrocoagulation on nitrate removal from aqueous solution

Water supply for consumption is one of the crucial objectives of water supply systems. Using of excessive fertilizer is a main source of nitrate content in water. The high amounts of nitrate in water have a determinable effect on the environment which must be removed due to drinking and industrial water standards. The purpose of this study is nitrate removal from aqueous solution by Electrocoagulation process. The applied pilot was comprised of a reservoir, electrode and power supply. In this study pH, electrical potential difference, nitrate initial concentration, total dissolved solid, kind of electrode, electrode connection methods and number of electrode were studied. Moreover, obtained optimum conditions were tested on Kerman water. The results showed that the electrocoagulation process can reach nitrate to less than standard limit. pH, electrical potential difference, total dissolved solids and number of electrodes have direct effect and initial concentration of nitrate has reverse effect on nitrate removal. This study also showed that under optimum condition, nitrate removal from Kerman water distribution system was 89.7 %. According to the results, Electrocoagulation process is suggested as an effective technique in nitrate removal.     

Laboratory testing of trace metals removal from mine drainage and arsenic removal from groundwater in the Black Hills of South Dakota

The Gilt Edge Superfund Site is a former heap-leach gold mine that currently is being remediated in the Black Hills of South Dakota. Mine runoff water is treated before release from the site. The field pH, before treatment, is about 3; the water contains arsenic at low levels and some trace metals at elevated levels, in addition to total dissolved solids concentrations of more than 1,900 mg/L. In the Keystone area of the Black Hills, naturally occurring arsenic has been detected at elevated concentrations in groundwater samples from wells. The City of Keystone’s Roy Street Well, which is not used currently, showed arsenic concentrations of 36 parts per billion and total dissolved solids of 320 mg/L. With field samples of water from the Gilt Edge site, a limestone-based method was successful in reducing trace metals concentrations to about 0.001 mg/L or less; at the Keystone site, the limestone method reduced arsenic levels to about 0.006 mg/L. The results are significant because previous research with the limestone-based method mainly had involved samples prepared with distilled water in the laboratory, in which interference of other ions such as sulfate did not occur. The research indicates the potential for broader applications of the limestone-based removal method, including scale-up work at field sites for water treatment.     

方解石负载羟基磷灰石复合材料去除水中铀离子的PRB活性介质研究

铀污染地下水分布于世界多国,其危害备受关注。本文基于溶胶-凝胶法制备方解石负载羟基磷灰石复合材料(CLHC),通过静态与动态对比试验,探讨了PRB活性介质对水中铀离子的吸附机理和去除效果。试验结果表明,制备的CLHC表面被羟基磷灰石覆盖,对铀离子具有较强的吸附能力。当U的初浓度为5.0 mg/L、试验周期为2 h、溶液pH值为4、CLHC用量为0.5 g/L时,CLHC可以吸附水中所有的铀离子。CLHC对铀离子的吸附过程可以用Langmuir等温吸附模型、粒子内扩散吸附动力学模型和准二级吸附动力学模型较好地进行描述。石英砂负载羟基磷灰石与CLHC相比,后者具有更强的吸附能力,而且具有更长的使用寿命。CLHC在吸附铀的过程中没有价态变化,其对铀离子的吸附主要为离子交换的化学吸附。本研究的成果可为可渗透反应墙被应用于铀污染地下水修复提供试验依据。     

Adsorption studies for the simultaneous removal of arsenic and selenium using naturally prepared adsorbent materials

The adsorption properties of eggshell membranes (ESM), eggshells (ES) and orange peels (OP) were studied for the removal of arsenic (total As) and selenium (total Se). The effect of chemical treatment of these adsorbents by HNO₃ and NaOH was also investigated using Fourier transform infrared spectroscopy (FT-IR). Analysis of the FT-IR spectra showed that treatment with NaOH and HNO₃ had an effect on the functional groups present in the materials and also on the adsorption by extension. Thermal analysis showed that ES were more thermally stable than the others with no water molecules in their matrix, which could have caused a substantial weight loss at around 70 °C. In terms of adsorption capacities, chemical treatment increased the adsorption capacities of ESM and OP achieving up to 170 μg g^?1 (As) and 160 μg g^?1 (Se), and 120 μg g^?1 (As) and 70 μg g^?1 (Se), respectively, with not much activity for ES in terms of adsorption. The two adsorbents (NaOH-treated OP and ESM) were then tested in environmental water samples and the results showed that 68.9 % of As and 74.8 % of Se, and 54.1 % of As and 47.3 % of Se were removed from domestic wastewater samples investigated using OP and ESM, respectively. Moreover, better selectivities towards the compounds of interest were achieved.