热弹性P波在有流体夹层介质中的传播问题及其基本特征

本文作为基础理论研究,讨论了热弹性P波在有流体夹层介质中的传播问题。研究结果表明:热弹性波在流体夹层的传播中,不仅存在反射波、透射波,而且,还伴随有具有相同传播速度的温度波;且其反射系数、透射系数均为复数,并与介质的物性参数及夹层厚度有关。同时指出反射波、透射波的振幅、位相均受介质的物性参数及夹层厚度的影响。此外,还表明夹层中往返震荡的层间波是一系列正传热弹性波和反传热弹性波的叠加。     

热弹性波在层状介质中传播的一类反射问题的解

本文作为基础理论研究, 从热弹性波方程组出发, 求出了热弹性波在层状介质中传播的解析解, 并给出了热弹性波对于平面夹层的反射波, 透射波及其伴随的具有相同传播速度的温度波。此时, 反射系数、 透射系数均为复数表明, 反射波、 透射波的振幅及相位都受介质的物性参数、 夹层厚度及入射波频率的影响。这些与弹性波不同的结果会在地震勘探、 地震工程等有关问题的研究中得到应用。     

热弹性波在流体—固体界面上的反射问题及其基本特征

本文建立了热弹性流体介质中的波方程,指出了该介质中可能传播的两类波,并建立了热弹性P波的概念和基本特征。此外,本文还研究了热弹性波在液体—固体界面上的反射问题,给出了反射系数、透射系数的表达式以及反射热弹性P波、透射热弹性P波和透射SV型S波的基本特征。     

热弹性波在流体—固体界面上的反射问题及其基本特征*

本文建立了热弹性流体介质中的波方程,指出了该介质中可能传播的两类波,并建立了热弹性P波的概念和基本特征。此外,本文还研究了热弹性波在液体—固体界面上的反射问题,给出了反射系数、透射系数的表达式以及反射热弹性P波、透射热弹性P波和透射SV型S波的基本特征。     

流体饱和多孔介质黏弹性动力人工边界

基于Biot流体饱和多孔介质本构方程，采用平面波和远场散射波经验叠加来反映外行波传播，以经验参数反映人工边界外行波动的衰减和多角度透射特性。在人工边界处分别施加反映固相和液相介质传播效应的弹簧及阻尼来模拟人工边界以外的无限域介质对来自有限域的外行波的能量的吸收作用。从而形成一种流体饱和多孔介质的黏弹性动力人工边界。数值算例表明：边界的精度和稳定性高于现有的黏性边界、黏弹性人工边界及一阶透射边界。     

含夹层孔隙介质分界面上反透射系数特征研究

研究地震波在含黏性流体孔隙介质中的传播特性,对于识别油气储层、刻画流体边界、判识油水界面等有重要作用.通常利用地震波在孔隙介质分界面上的反透射系数特征,来实现这些方面的研究.顶、底层孔隙介质之间存在含黏性流体孔隙介质夹层时,夹层内岩石骨架、孔隙因子、孔隙流体等参数会对反透射系数产生影响.本文推导出含夹层孔隙介质分界面上的反透射系数方程,针对方程建立不同孔隙度的含夹层孔隙介质模型;基于模型实现孔隙介质分界面上的反透射系数特征研究,分别分析不同夹层厚度、不同频率情况下,反透射系数随入射角的变化规律.研究表明,快慢纵波及横波的反透射系数都会受到孔隙夹层的影响,受影响程度主要取决于夹层厚度和地质背景等因素;慢纵波反射和透射系数数值极小,且后者随夹层厚度的增加而迅速衰减;频率通过反透射系数方程本身和地震波速度两个因素直接或间接的影响地震波反透射特征,其值的增加会引起快纵波和横波反透射系数不同程度的衰减.     

黏弹各向异性介质中波的反射与透射问题分析

黏弹各向异性介质中传播不均匀波,其反射、透射模式不仅与介质分界面两侧速度对比有关,还与品质因子Q的对比有关. 用伪谱技术模拟黏弹各向异性介质分界面上波的反射、透射,并与弹性各向异性介质、黏弹各向同性介质和弹性各向同性介质的模拟结果做比较. 计算平面波的反射、透射系数,分析介质的黏弹性和各向异性对反射、透射系数的影响. 数值模拟了一个三层介质模型中的波场,分析两个分界面上产生的反射波的特征. 黏弹各向异性介质中,qS波比qP波衰减程度大.     

三维层状孔隙介质中弹性波的一种积分表达式I：理论

孔隙介质弹性波传播理论在地球物理勘探、地震工程和岩土动力学等领域有着广泛的应用.而孔隙介质中的弹性波受孔隙度、渗透率、流体黏滞系数等参数的影响,因此研究波场的传播特征将有助于分析和提取这些信息.本文在Biot理论的基础上,针对三维层状孔隙介质模型,利用在合成理论地震图的研究中已经被证实具有稳定、高效且适用范围较广的Luco-Apsel-Chen（LAC）广义反透射方法,给出了弹性波场的一种积分形式的半解析解,可通过数值方法高效、准确地计算层状孔隙介质中的理论波场,所以该积分形式的半解析解可为三维层状孔隙介质波场传播特征的理论数值模拟研究提供一种新的途径和手段.     

井巷工程反射波超前探测逆时偏移成像

探讨了井巷隧道工程反射波法超前地质预报成像问题.从一阶速度－应力弹性波方程出发,推导了二维各向同性介质情况下弹性波逆时传播的高阶差分格式,实现了弹性波在数值空间中的逆时延拓.构建反射波法隧道超前探测中的断层、软弱夹层等介质模型,以反射波探测的正演记录作为初始条件,并从程函方程出发,采用逆时差分格式求取介质模型网格空间中各点的直达波旅行时作为弹性波逆时偏移的成像条件,实现多波多分量资料的逆时偏移.偏移结果表明,逆时偏移能够使隧道壁接收到的波场准确归位,提高隧道反射波超前探测的资料处理的精度.     

我国西北地区地壳中的高速夹层

在我国西北地区的柴达木盆地东部和甘肃地区,在距离炮点40互100公里处,能够接收到不少能量较强的地壳深界面反射波。另外还发现一种与一般反射波性质不同的波,其视速度特大,视速度随距离的变化不大,而且有较明显的终点;其吋距曲线与一般深界面反射波的时距曲线相交。根据它的特征可以判断地壳中存在具有速度梯度的高速夹层.求得的夹层参数为: 甘肃地区柴达木盆地东部覆盖层厚度 18.8公里 30.5公里覆盖层平均速度 5.5公里/秒 5.3公里/秒夹层厚度 6.0公里 3.2公里夹层速度 7.5-8.5公里/秒 7.5-8.0公里/秒夹层的上下界面均为强反射面,可以产生多次反射波。分別利用相邻两个反射波可以求得各层参数,并能避免射线折射的影响。甘肃地区和柴达木盆地东部的地壳厚度分別为51和52公里。地壳中有高速夹层的存在,可以更好地说明P~*速度分散的原因,而且也能够解释Lg波的传播机制。     

热弹性介质中波传播特征

深层-超深层油气地震勘探涉及高温介质地震波传播问题,热弹介质参数对地震波传播有重要影响.含弛豫时间修正项的Lord-Shulman双曲型耦合热弹波动方程从理论上预测了热弹性介质中存在快纵波、慢纵波(一种准静态慢纵波,简称热波)和横波的传播,两个纵波为热耗散衰减波而横波不受介质热特性的影响.本文结合平面波频散分析和格林函数法数值模拟,详细研究两个热耗散衰减波的频散和衰减特征,着重分析热导率、热膨胀系数及比热的变化对波速和衰减的影响.研究表明热导率作为主要参数决定了波速与衰减的临界变化,热膨胀系数对波速和衰减的幅度有明显影响,比热则兼顾了前两个热弹系数的影响特征.最后,利用热弹性动力学频率域的二阶格林函数进行波场快照数值模拟,展示热弹性介质中纵波、横波和热波的传播行为.     

Fission of a weakly nonlinear interfacial solitary wave at a step

The transformation of a weakly nonlinear interfacial solitary wave in an ideal two-layer flow over a step is studied. In the vicinity of the step the wave transformation is described in the framework of the linear theory of long interfacial waves, and the coefficients of wave reflection and transmission are calculated. A strong transformation arises for propagation into shallower water, but a weak transformation for propagation into deeper water. Far from the step, the wave dynamics is described by the Korteweg-de Vries equation which is fully integrable. In the vicinity of the step, the reflected and transmitted waves have soliton-like shapes, but their parameters do not satisfy the steady-state soliton solutions. Using the inverse scattering technique it is shown that the reflected wave evolves into a single soliton and dispersing radiation if the wave propagates from deep to shallow water, and only dispersing radiation if the wave propagates from shallow to deep water. The dynamics of the transmitted wave is more complicated. In particular, if the coefficient of the nonlinear quadratic term in the Korteweg-de Vries equation is not changed in sign in the region after the step, the transmitted wave evolves into a group of solitons and radiation, a process similar to soliton fission for surface gravity waves at a step. But if the coefficient of the nonlinear term changes sign, the soliton is destroyed completely and transforms into radiation. The effects of cubic nonlinearity are studied in the framework of the extended Korteweg-de Vries (Gardner) equation which is also integrable. The higher-order nonlinear effects influence the amplitudes of the generated solitons if the amplitude of the transformed wave is comparable with the thickness of lower layer, but otherwise the process of soliton fission is qualitatively the same as in the framework of the Korteweg-de Vries equation.     

Reflection and transmission of attenuated waves at the boundary between two dissimilar poroelastic solids saturated with two immiscible viscous fluids

The phenomenon of reflection and transmission of plane harmonic waves at the plane interface between two dissimilar poroelastic solids saturated with two immiscible viscous fluids is investigated. Both porous media are considered dissipative due to the presence of viscosity in pore‐fluids. Four attenuated (three dilatational and one shear) waves propagate in such a dissipative porous medium. A finite non‐dimensional parameter is used to define the effective connections between the surface‐pores of two media at their common interface. Another finite parameter represents the gas‐share in the saturation of pores. An attenuated wave in a dissipative medium is described through the specification of directions of propagation and maximum attenuation. A general representation of an attenuated wave is defined through its inhomogeneous propagation, i.e., different directions for propagation and attenuation. Incidence of an inhomogeneous wave is considered at the interface between two dissipative porous solids. This results in four reflected and four transmitted inhomogeneous waves. Expressions are derived for the partition of incident energy among the reflected and transmitted waves. Numerical examples are studied to determine the effects of saturating pore fluid, frequency, surface‐pore connections and wave inhomogeneity on the strengths of reflected and transmitted waves. Interaction energy due to the interference of different (inhomogeneous) waves is calculated in both the dissipative porous media to verify the conservation of incident energy.     

Reflection and transmission of inhomogeneous waves in a composite porous solid saturated by two immiscible fluids

This paper is concerned with reflection and transmission of a plane, elastic, and inhomogeneous wave striking obliquely at some discontinuity inside a porous medium composed of two distinct solids and saturated by two immiscible fluids. It is found that four P‐ and two SV‐waves are reflected, whereas four P‐ and two SV‐waves are transmitted at the interface. All reflected and transmitted waves are inhomogeneous in nature and specified with different directions of propagation and attenuation vectors. An expression for the Umov–Poynting energy flux vector is derived for the system. Continuity of energy flux along normal to the interface gives 12 required boundary conditions. Expressions of amplitude and energy ratios of various reflected and transmitted waves are derived. Variations in amplitude and energy coefficients of reflected and transmitted waves with angle of incidence are numerically studied for a porous matrix composed of shaley sandstone and clay, saturated with water and oil. The effects of change in oil saturation and volume fraction of clay are also observed on amplitude ratios. Numerical simulation reveals that the change in sign in the difference of capillary pressure across the interface causes jump in the values of amplitude ratios of all waves.     

热弹性介质中波的一类反射问题的解

研究了热弹性波的一类反射问题,就热弹性波的两种基本形式求得一类直反射问题及一类斜反射问题的解。结果表明,热弹性波的反射系数、折射系数不仅依赖于介质的性质,还依赖于波的频率;热弹性波的复反射系数及复折射系数使其在界面两侧的相位和附加温度场都出现跃变。     

新疆北天山地区中强震前单台地震波参数异常特征研究

强地震的孕育过程也是孕震介质的形成过程,在强震前震源附近小地震的地震波运动学,动力学特征的变化过程,则反映了孕震介质的变化过程,为研究地震的孕育,发展和发生的过程,采用单台地震波振幅比,尾波持续时间比,尾波衰减系数这３项地震波参数作为地震学短期前兆指标,分析其震兆特征,从而达到监测孕震介质变化的目的,研究结果表明,单台地震波参数能够有效地发现地震的前兆,但地震波参数的前兆图像复杂多变,不具有统一的     

Effect of reservoir bottom on earthquake response of concrete dams

The absorption of hydrodynamic pressure waves at the reservoir bottom has dominant effects on the structural response of the dam when subjected to ground motion. In the present study, a model is proposed for the absorption effects of the reservoir bottom in the earthquake analysis of dams. The model utilizes the wave reflection coefficient approach and is based on the solution of the wave equation in a sediment layer of viscoelastic material with a constant thickness overlying an elastic, semi-infinite foundation. Numerical studies were conducted to evaluate the effect of the sediment layer thickness and material properties as well as the effect of reflection of waves from the underlying rock. It is shown that the current approach of assuming the wave reflection coefficient at the reservoir bottom based on the characteristics of the sediment material and excluding the effect of the reflected waves from the underlying rock, may significantly underestimate the seismic response of the dam.     

Numerical simulation of seismic wave in elastic and viscoelastic TTI media*

Based on the two-dimensional (2D) three-component first-order velocity-stress equation, the high order staggered mesh finite difference numerical simulation method was used to simulate the elastic and viscoelastic tilted transversely isotropic (TTI) media. The perfect matched layer (PML) absorption boundary condition was selected to eliminate the boundary effect. The results show that: ① Under the condition of fixed elastic parameters of elastic TTI medium, when the polarization angle and azimuth are 60° and 45° respectively, the degree of shear wave splitting is significantly greater than the angle of 0°; ② The influence of viscoelasticity on TTI medium is mainly reflected in the amplitude. If the quality factor decreases, the attenuation of the seismic wave amplitude increases, causing the waveform to become wider and distorted. If the quality factor increases, the viscoelastic medium becomes closer to elastic medium; ③ For TTI medium with different polarization angle and azimuth angle in the upper and lower layers, the shear wave can multiple splits at the interface of medium. The symmetry of seismograms is affected by the polarization angle and azimuth angle of TTI medium; ④ Viscoelasticity has a great influence on reflected wave, transmitted wave and converted wave in the low-velocity model. When the viscoelasticity is strong, the weaker waves may not be shown.