Geochemistry of trace metals associated with reduced sulfur in freshwater sediments

Porewater concentration profiles were determined for Fe, trace elements (As, Cd, Co, Cu, Mn, Ni, Pb, Zn), sulfide, SO₄ and pH in two Canadian Shield lakes (Chevreuil and Clearwater). Profiles of pyrite, sedimentary trace elements associated with pyrite and AVS were also obtained at the same sites. Thermodynamic calculations are used, for the anoxic porewaters where sulfide was measured, to characterize diagenetic processes involving sulfide and trace elements and to illustrate the importance of sulfide, and possibly polysulfides and thiols, in binding trace elements. The ion activity products (IAP) of Fe sulfide agree with the solubility products (K_s) of greigite or mackinawite. For Co, Ni and Zn, IAP values are close to the K_S values of their sulfide precipitates; for Cu and Pb, IAP/K_s indicate large oversaturations, which can be explained by the presence of other ligands (not measured) such as polysulfides (Cu) and thiols (Pb). Cobalt, Cu, Ni and Zn porewater profiles generally display a decrease in concentration with increasing ΣH₂S, as expected for transition metals, whereas Cd, Pb and Zn show an increase (mobilisation). The results suggest that removal of trace elements from anoxic porewaters occurs by coprecipitation (As and Mn) with FeS(s) and/or adsorption (As and Mn) on FeS(s), and by formation of discrete solid sulfides (Cd, Cu, Ni, Pb, Zn and Co). Reactive Fe is extensively sulfidized (51–65%) in both lakes, mostly as pyrite, but also as AVS. Similarities between As, Co, Cu and Ni to Fe ratios in pyrite and their corresponding mean diffusive flux ratios suggest that pyrite is an important sink at depth for these trace elements. High molar ratios of trace elements to Fe in pyrite from Clearwater Lake correspond chronologically to the onset of smelting activities. AVS can be an important reservoir of reactive As, Cd and Ni and, to a lesser extent, of Co, Cu and Pb. Overall, the trace elements most extensively sulfidized were Ni, Cd and As (maximum of 100%, 81% and 49% of the reactive fraction, respectively), whereas Co, Cu, Mn, Pb and Zn were only moderately sulfidized (11–16%).     

青岛胶州湾沉积物痕量元素黄铁矿化程度及其剖面类型

为了探索青岛近海不同沉积环境下不同痕量元素的黄铁矿化规律, 2003年5月潜水员潜入海底采集了4个不同沉积环境的未扰动柱样, 并利用Huerta-Diaz and Morse (1990)连续提取技术测试分析了沉积物痕量金属的不同存在形式(活性态和黄铁矿结合态) 在垂直剖面上的分布规律.结果表明: 除了在涨潮三角洲上部沉积和潮下带沉积物柱子的Cd和Cr外, 痕量元素的黄铁矿化度的增高取决于其相应剖面上的DOP的增高; 并且不同痕量元素向黄铁矿中转移的规模存在着较大的差别, 即元素As、Hg和Mo转移的规模最大, Cu、Zn、Cd、Cr、Co和Ni中等, Pb和Mn最小; 此外, 还进一步揭示了河流三角洲沉积物的下部各元素的黄铁矿化程度高, 而潮下带沉积物以及涨潮三角洲沉积物低.最后指出在河口水下三角洲进行的清淤工作应注意黄铁矿结合态痕量元素的活化而产生生物有效的毒性元素.      

Pyrite geochemistry in the Toarcian Posidonia Shale of south‐west Germany: Evidence for contrasting trace‐element patterns of diagenetic and syngenetic pyrites

Authigenic pyrite grains from a section of the Lower Toarcian Posidonia Shale were analysed for their trace‐element contents and sulphur‐isotope compositions. The resulting data are used to evaluate the relationship between depositional conditions and pyrite trace‐element composition. By using factor analysis, trace‐elements in pyrite may be assigned to four groups: (i) heavy metals (including Cu, Ni, Co, Pb, Bi and Tl); (ii) oxyanionic elements (As, Mo and Sb); (iii) elements partitioned in sub‐microscopic sphalerite inclusions (Zn and Cd); and (iv) elements related to organic or silicate impurities (Ga and V). Results indicate that trace‐element contents in pyrite depend on the site and mechanism of pyrite formation, with characteristic features being observed for diagenetic and syngenetic pyrites. Diagenetic pyrite formed within anoxic sediments generally has a high heavy metals content, and the degree of pyritization of these elements increases with increasing oxygen deficiency, similar to the degree of pyritization of reactive Fe. The highest gradient in the increase of the degree of trace element pyritization with bottom‐water oxygenation was found for the elements Ni < Cu < Mo = As < Tl. In contrast, syngenetic pyrite formed within a euxinic water column typically is enriched in As, Mo and Sb, but is low in heavy metals, and the geochemical variation reflects changes in sea water composition.     

Contrasting the geochemistry of oxic sediments across ecosystems: a synthesis

The geochemistry of oxic sediments was contrasted across a range of Canadian aquatic ecosystems; 7 freshwater lakes, (3 circumneutral and 4 acidic), 15 peatlands (5 mineral-rich, 5 moderately-poor and 5 mineral-poor), 9 wetlands (3 oligosaline, 3 mesosaline and 3 euryhaline), an estuary (deposited and suspended sediments) and an intertidal region. Sediments were characterized by a simultaneous extraction that separated sediments into easily reducible (ER) metal (oxyhydroxides of Mn and easily reducible amorphous oxyhydroxides of Fe) and reducible (R) metal (more crystalline forms of oxyhydroxides of Fe), organic matter, and, the concentrations and partitioning of Zn, Cu and Cd associated with these 3 sediment components. Ecosystems were distinct with respect to ER Fe and organic matter [canonical variate analysis (CVA)] with 53% of among system variation in geochemistry attributed to these 2 components. Sediments of peatlands and wetlands contained greater amounts of organic matter whereas sediments of lakes, intertidal and estuarine deposited and suspended sediments were characterized by greater amounts of ER Fe. A further 21% of among system variation could be ascribed to organically bound Fe that was greater in acidic lakes and mineral-rich peatlands as compared to other systems. Concentration and partitioning of Cd within sediments was regionally dependent with 41% of among system variation (CVA) attributed to differences in ER Cd and R Cd. Cadmium from peatlands and lakes located in Ontario was recovered from all 3 sediment components whereas sediment from wetlands, the estuary and the intertidal regions of British Columbia (BC) contained no organically bound Cd with amounts recovered occurring mostly as ER Cd. Lakes and peatlands located in Ontario contained 3–5-fold total Cd as compared to ecosystems located in BC. A further 21% of among ecosystem variation was attributed to Zn partitioning. Zinc in peatland and wetland sediments occurred as R Zn as compared to lake and estuarine deposited sediments where Zn was recovered both as ER and R Zn. Total Zn was also 3–5-fold greater in sediments of systems in Ontario as compared to those sampled in BC. Concentration and partitioning of Cu was similar across all systems with Cu recovered from the organic component of sediment. The geochemistry of surficial oxic sediments with respect to ER Mn, R Fe and organic matter and the geochemical associations among these sediment components is ecosystem and region dependent. For assessing impacts of metals on sediment dwelling biota the geochemical characteristics of the system under study should first be defined.     

Evaluation of elemental enrichments in surface sediments off southwestern Taiwan

Surface slices of 20 sediment cores, off southwestern Taiwan, and bed sediment of River Kaoping were measured for major and trace elements (Al, As, Ca, Cd, Cl, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, S, Si, Ti, V, and Zn) to evaluate the geochemical processes responsible for their distribution, including elemental contamination. Major element/Al ratio and mean grain size indicate quartz-dominated, coarse grained sediments that likely derived from sedimentary rocks of Taiwan and upper crust of Yangtze Craton. Bi-plot of SiO₂ versus Fe₂O₃^T suggests the possible iron enrichment in sediments of slag dumping sites. Highest concentrations of Cr, Mn, P, S, and Zn found in sediments of dumping sites support this. Correlation analysis shows dual associations, detrital and organic carbon, for Cr, P, S, and V with the latter association typical for sediments in dumping sites. Normalization of trace elements to Al indicates high enrichment factors (>2) for As, Cd, Pb, and Zn, revealing contamination. Factor analysis extracted four geochemical associations with the principal factor accounted for 25.1% of the total variance and identifies the combined effects of dumped iron and steel slag-induced C–S–Fe relationship owing to authigenic precipitation of Fe–Mn oxyhydroxides and/or metal sulfides, and organic matter complexation of Fe, Mn, Ca, Cr, P, and V. Factors 2, 3, and 4 reveal detrital association (Ti, Al, Ni, Pb, Cu, and V), effect of sea salt (Cl, Mg, Na, and K) and anthropogenic component (As and Zn)-carbonate link, respectively, in the investigated sediments.     

Influence of a turbidite deposit on the extent of pyritization of iron,manganese and trace metals in sediments from the Guaymas Basin,Gulf of California (Mexico)

A core collected in the Guaymas Basin contained an organic-poor, Mn oxide-rich and (relatively) Fe oxide-rich turbidite layer that affected the distribution of Fe, Mn, C, S and trace metals. Results indicate that sediments not influenced by the turbidite layer achieved a 100% degree of pyritization and, by extension, that pyrite production is Fe-limited in these sediments. In contrast, the mud slide layer apparently supplied enough reactive Fe to transfer essentially 98% of the total S present at the base of the turbidite (17–19 cm) to the pyrite reservoir. C/S ratios showed rapid decreases with depth, from a high of 38 close to the sediment-water interface, to minimum values of 2.8 at the lower limit of the turbidite layer, a ratio equal to the average C/S value of normal marine modern sediments, where concentrations of organic C and pyrite supposedly have attained quasi-steady values. A significant part of the reactive Mn was associated with carbonates (41±12%) and, to a much lower degree, with pyrite (2.7±1.2%). The turbidite layer is currently showing a depletion of Mn relative to the host sediment. It is possible that Mn, a major metal constituent in these sediments, was initially present in high concentrations in the mud slide, but was eventually mobilized and transferred either to the water column or to the sediments immediately below the turbidite layer. Metals associated with this element probably followed the same path, affecting their incorporation into pyrite. The turbidite layer apparently affected the distribution of most of the trace metals associated with pyrite, except maybe Cd, Pb and, to a certain, extent Cr. However, Cu, Cr, Zn, Ni and Co were all found to be highly pyritized (>80%) in the sediments of the Guaymas Basin.     

Distribution and immobilization of heavy metals in Pliocene aquifer sediments in Wadi El Natrun depression, Western Desert

The Pliocene aquifer receives inflow of Miocene and Pleistocene aquifer waters in Wadi El Natrun depression. The aquifer also receives inflow from the agricultural activity and septic tanks. Nine sediment samples were collected from the Pliocene aquifer in Wadi E1 Natrun. Heavy metal (Cu, Sr, Zn, Mn, Fe, Al, Ba, Cr, Ni, V, Cd, Co, Mo, and Pb) concentrations of Pliocene aquifer sediments were investigated in bulk, sand, and mud fractions. The determination of extractable trace metals (Cu, Zn, Fe, Mn, and Pb) in Pliocene aquifer sediments using sequential extraction procedure (four steps) has been performed in order to study environmental pathways (e.g., mobility of metals, bounding states). These employ a series of successively stronger chemical leaching reagents which nominally target the different compositional fractions. By analyzing the liquid leachates and the residual solid components, it is possible to determine not only the type and concentration of metals retained in each phase but also their potential ecological significance. Cu, Sr, Zn, Mn, Fe, and Al concentrations are higher in finer sediments than in coarser sediments, while Ba, Cr, Ni, V, Cd, Co, Mo, and Pb are enriched in the coarser fraction. The differences in relative concentrations are attributed to intense anthropogenic inputs from different sources. Heavy metal concentrations are higher than global average concentrations in sandstone, USEPA guidelines, and other local and international aquifer sediments. The order of trace elements in the bulk Pliocene aquifer sediments, from high to low concentrations, is Fe?>?Al?>?Mn?>?Cr?>?Zn?>?Cu?>?Ni?>?V?>?Sr?>?Ba?>?Pb?>?Mo?>?Cd?>?Co. The Pliocene aquifer sediments are highly contaminated for most toxic metals, except Pb and Co which have moderate contamination. The active soluble (F0) and exchangeable (F1) phases are represented by high concentrations of Cu, Zn, Fe, and Mn and relatively higher concentrations of Pb and Cd. This may be due to the increase of silt and clay fractions (mud) in sediments, which act as an adsorbent, retaining metals through ion exchange and other processes. The order of mobility of heavy metals in this phase is found to be Pb?>?Cd?>?Zn?>?Cu?>?Fe?>?Mn. The values of the active phase of most heavy metals are relatively high, indicating that Pliocene sediments are potentially a major sink for heavy metals characterized by high mobility and bioavailability. Fe–Mn oxyhydroxide phase is the most important fraction among labile fractions and represents 22% for Cd, 20% for Fe, 11% for Zn, 8% for Cu, 5% for Pb, and 3% for Mn. The organic matter-bound fraction contains 80% of Mn, 72% of Cu, 68% of Zn, 60% of Fe, 35% of Pb, and 30% of Cd (as mean). Summarizing the sequential extraction, a very good immobilization of the heavy metals by the organic matter-bound fraction is followed by the carbonate-exchangeable-bound fraction. The mobility of the Cd metal in the active and Fe–Mn oxyhydroxide phases is the highest, while the Mn metal had the lowest mobility.     

Trace metals in oxic lake sediments: possible adsorption onto iron oxyhydroxides

Apparent overall equilibrium constants for the adsorption of Cd, Cu, Ni, Pb and Zn onto natural iron oxyhydroxides have been calculated from the partitioning of these trace metals in oxic lake sediments and the in situ measurement of trace metal concentrations in the associated pore waters. Such values obtained from lakes of various pH located on the Precambrian Shield, in the area of Sudbury, Ontario, are compared with equilibrium constants obtained for the adsorption of the trace metals onto iron oxyhydroxides in well-defined media.The field data are consistent with laboratory experiments reported in the literature and with theory. Both the influence of pH upon adsorption and the binding strength sequence observed for the field data agree with theory. At high sediment pH values, the partitioning of Cd, Ni and Zn between the pore waters and the natural iron oxyhydroxides is similar to those reported in the literature for the adsorption of these metals at low surface coverage onto amorphous iron oxyhydroxides in a NaNO₃ medium; deviation from this simple model is however observed for Cu and Pb, presumably due to the competitive action of dissolved ligands. At low sediment pH values, the adsorption is much higher than predicted by the simple model and can be explained by the formation of ternary complexes with the iron oxyhydroxide surface.     

Heavy metal partitioning in river sediments severely polluted by acid mine drainage in the Iberian Pyrite Belt

This study provides a geochemical partitioning pattern of Fe, Mn and potentially toxic trace elements (As, Cd, Cr, Cu, Ni, Pb, Zn) in sediments historically contaminated with acid mine drainage, as determined by using a 4-step sequential extraction scheme. At the upperstream, the sediments occur as ochreous precipitates consisting of amorphous or poorly crystalline oxy-hydroxides of Fe, and locally jarosite, whereas the estuarine sediments are composed mainly of detrital quartz, illite, kaolinite, feldspars, carbonates and heavy minerals, with minor authigenic phases (gypsum, vivianite, halite, pyrite). The sediments are severely contaminated with As, Cd, Cu, Pb and Zn, especially in the vicinity of the mining pollution sources and some sites of the estuary, where the metal concentrations are several orders of magnitude above background levels. Although a significant proportion of Zn, Cd and Cu is present in a readily soluble form, the majority of heavy metals are bonded to reducible phases, suggesting that Fe oxy-hydroxides have a dominant role in the metal accumulation. In the estuary, the sediments are potentially less reactive than in the riverine environment, because relevant concentrations of heavy metals are immobilised in the crystalline structure of minerals.     

Sedimentary Trace Elements as Proxies to Depositional Changes Induced by a Holocene Fresh-Brackish Water Transition

A halocline developed in the GotlandDeep, Baltic Sea, at c. 8.0 ¹⁴C ky BP, as theresult of a transition from fresh to brackish water.The sediment-water interface changed from oxic topredominantly anoxic, depositional conditions wereperiodically euxinic and pyrite formation wasextensive. This environmental change led topyritization of the upper part of earlier depositedsediments. This study discusses how the distributionof trace elements (As, Ba, Cd, Cu, Co, Mo, Mn, Ni, Pb,U, Zn and V) were affected by the changing redoxconditions, productivity and salinity. The reducingconditions led to pyritization of Cu, Co, Ni, Cd, Mo,Mn and As. Lead and Zn concentrations are very low inpyrite, in agreement with their coordination tosulfide being tetrahedral. Certain elements areenriched in those sediments deposited under euxinicconditions. This enrichment was caused by scavengingof elements dissolved in the water column and isrestricted to elements that have a comparably longresidence time in the Baltic Sea. Molybdenum appearsto be the most unambigious proxy for euxinicconditions, whereas enrichment of U also requiresbrackish water in the productive zone. In the brackishenvironment, enrichment of Ba and V are linked to thecycling of organic carbon. Manganese and As are theonly elements that have been significantly remobiliseddue to the downward moving pyritization front.     

南极普里兹湾表层沉积物微量元素分布特征及其物源指示意义

利用电感耦合等离子体质谱仪测定了中国南极科考21~27航次期间获取的普里兹湾表层沉积物中Cu、Pb、Zn、Cd、Cr、Co、Al、Fe、Mn的含量,分析了普里兹湾微量元素的分布特征,结合沉积物粒度分布、生物硅含量,并利用富集系数和主成分分析的方法,探讨了微量元素的物源指示意义。研究结果表明:普里兹湾沉积物中的微量元素含量与南大洋其他海域具有很好的可比性。Cu、Zn、Cr、Co、Fe、Mn含量在陆坡深海区明显高于冰架边缘区和陆架区;Al、Pb含量在冰架边缘区较高;而Cd含量在陆架区相对较高。人类活动对普里兹湾沉积物中的微量元素没有明显的影响,南极大陆岩石风化产物和海洋生物源性沉降是其主要来源。冰架边缘区及陆架破折处P2-9站位的微量元素主要为岩源性输入。陆架区、陆坡深海区的微量元素Cu、Zn、Cr、Co、Fe、Mn明显受到生源性物质输入的影响。而普里兹湾沉积物中Cd则主要来源于硅藻的吸收利用及硅质软泥的富集。     

Geochemical variations of major and trace elements in recent sediments,off the Gulf of Mannar,the southeast coast of India

The Gulf of Mannar along the Tuticorin coast is a coral base of the southeast coast of India. To obtain a preliminary view of its environmental conditions, geochemical distribution of major elements (Si, Al, Fe, Ca, Mg, Na, K, P), trace elements (Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) and acid leachable elements (Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) were analyzed in surface sediment samples from two seasons. Geochemical fractionation confirmed the lithogenic origin of metals, which were mainly associated with the detrital phase. The sediments in the gulf are sandy with abundant calcareous debris, which controls the distribution of total and acid leachable elements. Enrichment factors relative to crust vary by a magnitude of two to three and the presence of trace metals indicates the input of Cr, Pb, Cd, Cu and Zn in both forms through industrial activities. Factor analysis supports the above observation with higher loadings on acid leachable elements and its association with CaCO₃. The increase in concentration of trace metals (Cr, Pb, Cd, Cu, Co, Ni, Zn) along the Gulf of Mannar indicates that the area has been contaminated by the input from riverine sources and the industries nearby. The present study indicates that other sources should be evaluated in the long-term monitoring program.     

Environmental geochemistry of El Temsah Lake sediments, Suez Canal district, Egypt

The heavy metal contents of Mn, Ni, Cu, Zn, Cr, Co, Pb, Cd, Fe, and V in the surface sediments from five selected sites of El Temsah Lake was determined by graphite furnace atomic absorption spectrophotometer. Geochemical forms of elements were investigated using four-step sequential chemical extraction procedure in order to identify and evaluate the mobility and the availability of trace metals on lake sediments, in comparison with the total element content. The operationally defined host fractions were: (1) exchangeable/bound to carbonate, (2) bound to Fe/Mn oxide, (3) bound to organic matter/sulfides, and (4) acid-soluble residue. The speciation data reveals that metals Zn, Cd, Pb, Ni, Mn, Cu, Cr, Fe, and V are sink primarily in organic and Fe–Mn oxyhydroxides phases. Co is mainly concentrated in the active phase. This is alarming because the element is enriched in Al Sayadin Lagoon which is still the main site of open fishing in Ismailia. Average concentration of the elements is mostly above the geochemical background and pristine values of the present study. There is a difference on the elemental composition of the sediment collected at the western lagoon (Al Sayadin Lagoon), junction, the shoreline shipyard workshops, and eastern beach of the lake. Depending upon the nature of elements and local pollution source, high concentration of Zn, Pb, and Cu are emitted by industrial wastewater flow (shoreline workshops), while sanitary and agricultural wastewater (El Bahtini and El Mahsama Drains) emit Co and Cd in Al Sayadin Lagoon. On the other hand, there is a marked decrease in potentially toxic heavy metal concentrations in the sediments at the most eastern side of the lake, probably due to the successive sediment dredging and improvements in water purification systems for navigation objective. These result show that El Temsah receives concentrations in anthropogenic metals that risk provoking more or less important disruptions, which are harmful and irreversible on the fauna and flora of this lake and on the whole ecobiological equilibrium.     

Accumulation of potentially toxic elements in sediments in Budi Lagoon,Araucania Region,Chile

The concentrations of Cd, Cu, Mn, Ni, Pb, Fe and Zn were determined in superficial sediments extracted from nine zones of Budi Lagoon, located in the Araucanía Region (Chile). The concentrations of these metals were determined by flame atomic absorption spectroscopy and the method was validated using certified reference material (marine sediment). The concentration ranges found for the trace elements were: Pb < 0.5; Cd < 0.2–3.9; Cu 21.8–61.9; Ni 31.2–59.4; Zn 54.5–94.8 mgkg^?1 (dry weight). The elements that registered the highest concentrations were Mn 285.4–989.8 mgkg^?1 and Fe 4.8–10.6 %. The lagoon cluster analysis of the stations was divided into three groups (Temo station with high Cu and low Mn concentrations, Bolleco, Comué, Allipén and Deume 3 stations presented highest Cd concentration, and another group Botapulli, Río Budi, Deume 2 and Deume 1 stations presented low levels of Cd). The textural characteristics of the sediment were determined (gravel, sand and mud) and the results were correlated with the concentrations of the metals in the various study zones. The sediments of Budi Lagoon presented high levels of Fe and Mn, which are of natural origin and exceed the maximum values recorded by many authors. With respect to the recorded concentrations for Cd, Cu, Ni and Zn, are within the ranges published by other authors in similar works. The Pb element was not detected. The results were subjected to statistical analysis to evaluate the correlations between the content of the elements and obtain the site of sediment.     

Metal speciation and attenuation in stream waters and sediments contaminated by landfill leachate

The degree of metal contamination (Zn, Pb, Cu, Ni, Cd) has been investigated in the vicinity of an old unmonitored municipal landfill in Prague, Czech Republic, where the leachate is directly drained into a surface stream. The water chemistry was coupled with investigation of the stream sediment (aqua regia extract, sequential extraction, voltammetry of microparticles) and newly formed products (SEM/EDS, XRD). The MINTEQA2 speciation-solubility calculation showed that the metals (Zn, Pb, Cu, Ni) are mainly present as carbonate complexes in leachate-polluted surface waters. These waters were oversaturated with respect to Fe(III) oxyhydroxides, calcite (CaCO₃) and other carbonate phases. Three metal attenuation mechanisms were identified in leachate-polluted surface waters: (i) spontaneous precipitation of metal-bearing calcite exhibiting significant concentrations of trace elements (Fe, Mn, Mg, Sr, Ba, Pb, Zn, Ni); (ii) binding to Fe(III) oxyhydroxides (mainly goethite, FeOOH) (Pb, Zn, Cu, Ni); and (iii) preferential bonding to sediment organic matter (Cu). These processes act as the key scavenging mechanisms and significantly decrease the metal concentrations in leachate-polluted water within 200 m from the direct leachate outflow into the stream. Under the near-neutral conditions governing the sediment/water interface in the landfill environment, metals are strongly bound in the stream sediment and remain relatively immobile.     

Environmental contamination of trace elements in the vicinity of Okpara coal mine, Enugu, Southeastern Nigeria

Water, sediment, and mine spoil samples were collected within the vicinity of the Okpara coal mine in Enugu, Southeastern Nigeria, and analyzed for trace elements using ICP-MS to assess the level of environmental contamination by these elements. The results obtained show that the mine spoils and sediments are relatively enriched in Fe, with mean values of 1,307.8(mg/kg) for mine spoils and 94.15% for sediments. As, Cd, Cr, Mn,Ni, Pb, and Zn in the sediments were found to be enriched relative to the mean values obtained from the study area, showing contamination by these elements. The mean values of Fe, Mn, Cu, and Cr in the mine spoils and mean values of Fe, Cu, Pb, Zn, Ni, Cr, and Mn in sediments, respectively, are above the background values obtained from coal and shale in the study area, indicating enrichment with these elements. The water and sediments are moderately acidic, with mean pH values of 4.22?±?1.06 and 4.66?±?1.35, respectively. With the exception of Fe, Mn, and Ni, all other elements are within the Nigerian water quality standard and WHO limits for drinking water and other domestic purposes. The strong to moderate positive correlation between Fe and Cu (r?=?0.72), Fe and Zn (r?=?0.88), and Fe and As (r?=?0.60) at p?<?0.05 as obtained for the sediments depict the scavenging effect of Fe on these mobile elements. As also shows a strong positive correlation with Mn (r?=?≥ 0.70, p?<?0.05), indicating that Mn plays a major role in scavenging elements that are not co-precipitated with Fe. In water, the strong positive correlation observed between Cr and Cd (r?=?1.00), Cu and Ni (r?=?0.94), Pb and Cu (r?=?0.87) and Zn and Cu (r?=?0.99); Ni and Pb (r?=?0.83) and Zn and Ni (r?=?0.97); and between Pb and Zn (0.84) at p?<?0.05 may indicate similar element–water reaction control on the system due to similarities in chemical properties as well as a common source. Elevated levels of heavy metals in sediments relative to surface water probably imply that sorption and co-precipitation on Al and Fe oxides are more effective in the mobilization and attenuation of heavy metals in the mine area than acid-induced dissolution. The level of concentration of trace elements for the mine spoils will serve as baseline data for future reference in the study area.     

Diagenetic cycling of trace elements in the bottom sediments of the Swan River Estuary,Western Australia

Teflon strips were used in-situ in the bottom sediments at two sites in the Swan River Estuary to collect diagenetic Fe–Mn oxyhydroxides and monitor monthly changes in their morphology and trace element geochemistry. This study demonstrates that substantial concentrations of trace elements accumulate at the redox front during the formation of diagenetic Fe–Mn oxyhydroxides. It is likely that the Fe–Mn oxyhydroxides initially nucleate and grow on the Teflon strips via bacterial activity. Trace element geochemistry of the diagenetic Fe–Mn oxyhydroxides is influenced by changes in the supply of trace elements from either the bottom sediments and/or water column or changes in the physico-chemical status of bottom and porewaters. If sufficient diagenetic Fe–Mn oxyhydroxides are preserved in the upper layer(s) of the bottom sediment it is possible that diagenetic (secondary) trace element enrichment profiles may be produced which modify the historical input of natural or anthropogenic trace element sources. Alternatively, partial or complete dissolution of the diagenetic Fe–Mn oxyhydroxides in response to temporal changes in the redox status of the bottom sediment may lead to a substantial underestimate of trace element fluxes in historical bottom sediment profiles. This study highlights that considerable care must be taken when interpreting short- to long-term geochemical profiles in bottom sediments due to the possible occurrence of rapid, seasonally mediated diagenetic processes.     

A comparison of the early diagenetic environment in intertidal sands and muds of the Manukau Harbour,New Zealand

The early diagenetic environment of intertidal sandy sediments (sands) and muddy sediments (muds) is described and compared from two cores taken from an unpolluted part of the Manukau Harbour, New Zealand. Extraction techniques characterized the form of the trace elements (Fe, Mn, S, C, Pb, Zn, Cu) at different depths in the sediment. Dissolved forms of Fe, Mn, and S were measured in interstitial water. Nonresidual metal concentrations, humic acid, FeS, and FeS₂ are an order of magnitude higher in the muds than in the sands because of dilution by unreactive sand particles. Muds contain a larger proportion of metals in the mobile fractions; exchangeable (Mn), carbonate (Mn, Fe, Zn), and easily-reducible oxide (Fe, Mn, Zn, Pb). This is due to greater surface area (for Mn adsorption); the favorable conditions for MnCO₃, FeCO₃, and FeS precipitation; and higher concentrations of easily reducible iron oxide and humic acid. Therefore, compared to the sands, muds are more important as reservoirs for toxic metals, both in terms of quantity and availability. At either site there was very little difference between the forms of Zn, Pb or Cu identified by sequential extraction as sediments changed from oxic to anoxic conditions. One reason for this is that the amounts and proportions of some of the important components that bind metals, viz., amorphous iron hydrous oxides, humic acids, and FeS₂, do not change much. Other components that do change with redox conditions, for example, manganese phases and FeS, are only minor components of the sediment. Redox conditions, then, have relatively little effect on trace-metal partitioning in the sediment matrix of these unpolluted sediments.     

In situ adsorption of mercury,methylmercury and other elements by iron oxyhydroxides and organic matter in lake sediments

Samples of authigenic material, sediment overlying water and oxic surface sediment (0–0.5-cm depth) from a perennially oxygenated lacustrine basin were analysed to investigate which solid phases are important for binding a suite of trace elements (Ag, As, Ca, Cd, Cu, Hg, In, methylmercury (MeHg), Mg, Mo, Pb, Sb and Zn). The authigenic material, which was collected with inert Teflon sheets deployed for several years across the sediment–water interface, contained mainly poorly crystallized Fe oxyhydroxides and natural organic matter, presumably humic substances derived from the watershed. Manganese oxyhydroxides were not present in the collected authigenic material due to the slightly acidic condition (pH = 5.6) of the lake that prevents the formation and recycling of these compounds. Conditional equilibrium constants for the adsorption of cationic (K_Fe–M) and anionic (K_Fe–A) trace elements onto the authigenic Fe oxyhydroxides were estimated from their concentrations in the authigenic material and in bottom water samples. These field-derived values of K_Fe–M and K_Fe–A were compared with those predicted by the surface complexation model, using laboratory-derived intrinsic adsorption constants and the water composition at the study site. Equilibrium constants (K_POM–M) were also calculated for the adsorption of the cationic trace elements onto the humic substances contained in the diagenetic material. The field-derived values of K_POM–M were compared to those predicted by the speciation code WHAM 6 for the complexation of the trace elements by dissolved humic substances in the lake. Combining the results of the present study with those on the distributions of trace elements in the porewater and solid-phase sediments reported in previous studies at the same site, it was determined whether the trace elements bind preferentially to Fe oxyhydroxides or natural organic matter in oxic sediments. The main inferences are that the anionic trace elements As, Mo and Sb, as well as the cationic metal Pb are preferentially bound to the authigenic Fe oxyhydroxides whereas the other trace elements, and especially Hg and MeHg, are preferentially bound to the humic substances.     

Geochemistry and specific features of manganese ore formation in sediments of oceanic bioproductive zones

Processes of authigenic manganese ore formation in sediments of the northern equatorial Pacific are considered on the basis of study of the surface layer (<2 mm) of ferromanganese nodule and four micronodule size fractions from the associated surface sediment (0–7 cm). Inhomogeneity of the nodule composition is shown. The Mn/Fe ratio is maximal in samples taken from the lateral sectors of nodule at the water-sediment interface. Compositional differences of nodules are related to the preferential accumulation of microelements in iron oxyhydroxides (P, Sr, Pb, U, Bi, Th, Y, and REE), manganese hydroxides (Co, Ni, Cu, Zn, Cd, Mo, Tl, W), and lithogenous component trapped during nodule growth (Ga, Rb, Ba, and Cs). The Ce accumulation in the REE composition is maximal in the upper and lower parts of the nodule characterized by the minimal Mn/Fe values. The compositional comparison of manganese micronodules and surface layers of the nodule demonstrated that the micronodule material was subjected to a more intense reworking during the diagenesis of sediments. The micronodules are characterized by higher Mn/Fe and P/Fe ratios but lower Ni/Cu and Co/Ni ratios. The micronodules and nodules do not differ in terms of contents of Ce and Th that are least mobile elements during the diagenesis of elements. Differences in the chemical composition of micronodules and nodules are related not only to the additional input of Mn in the process of diagenesis, but also to the transformation of iron oxyhydroxides after the removal of Mn from the close association with Fe formed in the suspended matter at the stage of sedimentation.