Geological evolution and structural style of the Palaeozoic Tafilalt sub‐basin,eastern Anti‐Atlas (Morocco,North Africa)

The Tafilalt is one of a number of generally unexplored sub‐basins in the eastern Anti‐Atlas of Morocco, all of which probably underwent a similar tectono‐stratigraphic evolution during the Palaeozoic Era. Analysis of over 1000 km of 2‐D seismic reflection profiles, with the interpretation of ten regional seismic sections and five isopach and isobath maps, suggests a multi‐phase deformation history for the Palaeozoic‐aged Tafilalt sub‐basins. Extensional phases were probably initiated in the Cambrian, followed by uniform thermal subsidence up to at least the end of the Silurian. Major extension and subsidence did not begin prior to Middle/Upper Devonian times. Extensional movements on the major faults bounding the basin to the north and to the south took place in synchronisation with Upper Devonian sedimentation, which provides the thickest part of the sedimentary sequence in the basin. The onset of the compressional phase in Carboniferous times is indicated by reflectors in the Carboniferous sequence progressively onlapping onto the Upper Devonian sequence. This period of compression developed folds and faults in the Upper Palaeozoic‐aged strata, producing a structural style characteristic of thin‐skinned fold and thrust belts. The Late Palaeozoic units are detached over a regional décollement with a northward tectonic vergence. The folds have been formed by the process of fault‐propagation folding related to the thrust imbricates that ramp up‐section from the décollement. Copyright © 2007 John Wiley & Sons, Ltd.     

Post‐Variscan exhumation of the Central Anti‐Atlas (Morocco) constrained by zircon and apatite fission‐track thermochronology

The origin of the Anti‐Atlas relief is one of the currently debated issues of Moroccan geology. To constrain the post‐Variscan evolution of the Central Anti‐Atlas, we collected nine samples from the Precambrian basement of the Bou Azzer‐El Graara inlier for zircon and apatite fission‐track thermochronology. Zircon ages cluster between 340 ± 20 and 306 ± 20 Ma, whereas apatite ages range from 171 ± 7 Ma to 133 ± 5 Ma. Zircon ages reflect the thermal effect of the Variscan orogeny (tectonic thickening of the ca. 7 km‐thick Paleozoic series), likely enhanced by fluid advection. Apatite ages record a complex Mesozoic–Cenozoic exhumation history. Track length modelling yields evidence that, (i) the Precambrian basement was still buried at ca. 5 km depth by Permian times, (ii) the Central Anti‐Atlas was subjected to (erosional) exhumation during the Triassic‐Early Cretaceous, then buried beneath ca. 1.5 km‐thick Cretaceous‐Paleogene deposits, (iii) final exhumation took place during the Neogene, contemporaneously with that of the High Atlas.     

Physical analog (centrifuge) model investigation of contrasting structural styles in the Salt Range and Potwar Plateau,northern Pakistan

We use scaled physical analog (centrifuge) modeling to investigate along- and across-strike structural variations in the Salt Range and Potwar Plateau of the Himalayan foreland fold-thrust belt of Pakistan. The models, composed of interlayered plasticine and silicone putty laminae, comprise four mechanical units representing the Neoproterozoic Salt Range Formation (basal detachment), Cambrian–Eocene carapace sequence, and Rawalpindi and Siwalik Groups (Neogene molasse), on a rigid base representing the Indian craton. Pre-cut ramps simulate basement faults with various structural geometries.A pre-existing north-dipping basement normal fault under the model foreland induces a frontal ramp and a prominent fault-bend-fold culmination, simulating the Salt Range. The ramp localizes displacement on a frontal thrust that occurs out-of-sequence with respect to other foreland folds and thrusts. With a frontal basement fault terminating to the east against a right-stepping, east-dipping lateral ramp, deformation propagates further south in the east; strata to the east of the lateral ramp are telescoped in ENE-trending detachment folds, fault-propagation folds and pop-up structures above a thick basal detachment (Salt Range Formation), in contrast to translated but less-deformed strata with E–W-trending Salt-Range structures to the west. The models are consistent with Salt Range–Potwar Plateau structural style contrasts being due to basement fault geometry and variation in detachment thickness.     

Stratigraphic and structural evolution of the Blue Nile Basin,Northwestern Ethiopian Plateau

The Blue Nile Basin, situated in the Northwestern Ethiopian Plateau, contains ∼1400 m thick Mesozoic sedimentary section underlain by Neoproterozoic basement rocks and overlain by Early–Late Oligocene and Quaternary volcanic rocks. This study outlines the stratigraphic and structural evolution of the Blue Nile Basin based on field and remote sensing studies along the Gorge of the Nile. The Blue Nile Basin has evolved in three main phases: (1) pre‐sedimentation phase, include pre‐rift peneplanation of the Neoproterozoic basement rocks, possibly during Palaeozoic time; (2) sedimentation phase from Triassic to Early Cretaceous, including: (a) Triassic–Early Jurassic fluvial sedimentation (Lower Sandstone, ∼300 m thick); (b) Early Jurassic marine transgression (glauconitic sandy mudstone, ∼30 m thick); (c) Early–Middle Jurassic deepening of the basin (Lower Limestone, ∼450 m thick); (d) desiccation of the basin and deposition of Early–Middle Jurassic gypsum; (e) Middle–Late Jurassic marine transgression (Upper Limestone, ∼400 m thick); (f) Late Jurassic–Early Cretaceous basin‐uplift and marine regression (alluvial/fluvial Upper Sandstone, ∼280 m thick); (3) the post‐sedimentation phase, including Early–Late Oligocene eruption of 500–2000 m thick Lower volcanic rocks, related to the Afar Mantle Plume and emplacement of ∼300 m thick Quaternary Upper volcanic rocks. The Mesozoic to Cenozoic units were deposited during extension attributed to Triassic–Cretaceous NE–SW‐directed extension related to the Mesozoic rifting of Gondwana. The Blue Nile Basin was formed as a NW‐trending rift, within which much of the Mesozoic clastic and marine sediments were deposited. This was followed by Late Miocene NW–SE‐directed extension related to the Main Ethiopian Rift that formed NE‐trending faults, affecting Lower volcanic rocks and the upper part of the Mesozoic section. The region was subsequently affected by Quaternary E–W and NNE–SSW‐directed extensions related to oblique opening of the Main Ethiopian Rift and development of E‐trending transverse faults, as well as NE–SW‐directed extension in southern Afar (related to northeastward separation of the Arabian Plate from the African Plate) and E–W‐directed extensions in western Afar (related to the stepping of the Red Sea axis into Afar). These Quaternary stress regimes resulted in the development of N‐, ESE‐ and NW‐trending extensional structures within the Blue Nile Basin. Copyright © 2008 John Wiley & Sons, Ltd.     

Deformation history of the Hampden Synform in the Eastern Fold Belt of the Mt Isa terrane

The moderately metamorphosed and deformed rocks exposed in the Hampden Synform, Eastern Fold Belt, in the Mt Isa terrane, underwent complex multiple deformations during the early Mesoproterozoic Isan Orogeny (ca 1590–1500 Ma). The earliest deformation elements preserved in the Hampden Synform are first‐generation tight to isoclinal folds and an associated axial‐planar slaty cleavage. Preservation of recumbent first‐generation folds in the hinge zones of second‐generation folds, and the approximately northeast‐southwest orientation of restored L¹ ₀ intersection lineation suggest recumbent folding occurred during east‐west to northwest‐southeast shortening. First‐generation folds are refolded by north‐south‐oriented upright non‐cylindrical tight to isoclinal second‐generation folds. A differentiated axial‐planar cleavage to the second‐generation fold is the dominant fabric in the study area. This fabric crenulates an earlier fabric in the hinge zones of second‐generation folds, but forms a composite cleavage on the fold limbs. Two weakly developed steeply dipping crenulation cleavages overprint the dominant composite cleavage at a relatively high angle (>45°). These deformations appear to have had little regional effect. The composite cleavage is also overprinted by a subhorizontal crenulation cleavage inferred to have developed during vertical shortening associated with late‐orogenic pluton emplacement. We interpret the sequence of deformation events in the Hampden Synform to reflect the progression from thin‐skinned crustal shortening during the development of first‐generation structures to thick‐skinned crustal shortening during subsequent events. The Hampden Synform is interpreted to occur within a progressively deformed thrust slice located in the hangingwall of the Overhang Shear.     

Distinguishing eustatic and epeirogenic controls on Lower–Middle Cambrian boundary successions in West Gondwana (Morocco and Iberia)

Major eustatic fall has been invoked to explain Lower–Middle Cambrian boundary sandstones and faunal replacements on a number of Cambrian palaeocontinents. This proposal has been tested on the Moroccan and Spanish margins of West Gondwana and found to be inadequate to explain stratigraphical developments. In these regions, sandstone intervals long presumed to be regressive and late Early Cambrian in age are now shown to be early Middle Cambrian, and composed of a lower regressive and an overlying transgressive sandstone separated by a regional unconformity. Only the lower tidalites (i.e. Tazlaft Formation in Morocco and lower Daroca sandstones in Spain) record the Hawke Bay eustatic regression in West Gondwana. The Tazlaft is overlain by a newly recognized, unconformably overlying sandstone (Talelt Formation) that onlapped southern Morocco with reactivation of a pull‐apart or transcurrent regime. Up to 150 m of erosion on uplifted blocks in the High Atlas range and foundering of the Souss Basin to the south preceded onlap and deposition of the volcanic‐rich Tatelt, the correlative and depositional analogue of the upper Daroca and lower Valdemides Formations in northern Spain. With folding and erosion, a type 1 depositional sequence boundary also caps the Tatelt at its contact with an overlying, lower Middle Cambrian mudstone‐dominated succession. This unconformity probably occurs in Spain within the Valdemiedes Formation and corresponds to a faunal discontinuity called the ‘Valdemiedes geoevent’. The Iberian ‘Daroca regression’ and Moroccan ‘Asrir regression’ are misnomers, as the sandstones on which they are based are composite units with a lower regressive interval that records eustatic fall and an upper transgressive unit that records epeirogenically driven onlap.     

Mechanics of thick-skinned Variscan overprinting of Cadomian basement (Iberian Variscides)

Remnants of the Cadomian basement can be found in the Iberian Variscides (IBVA) in several key sectors of its autochthonous units (composed of Neoproterozoic to Lower Palaeozoic metasedimentary sequences) and within the Continental Allochthonous Terrane (CAT). Comprehensive characterization of these critical exposures shows that the prevailing features are related to major geological events dated within the age range of 620–540 Ma. Indeed, near the Cambrian–Ordovician boundary, the IBVA Internal Zones experienced pervasive basement thinning and cover thickening, reflecting diffusive displacement of intracratonic rifting that continued until Lower Devonian times. In the thick-skinned Internal Zones, Helvetic/Penninic style nappes were generated, whereas flower upright axial structures developed along transpressive, intraplate shear zones. These features contrast with those preserved in the thin-skinned IBVA External Zones, dominated by décollements above (un-)deformed Palaeozoic and Cadomian basement. The inferred attenuation of rheological contrast between Cadomian basement and Palaeozoic cover can be explained by inherited fabrics due to thermal softening operated during the Cambrian–Lower Devonian extensional regime. Deeper décollements (and subsequent strain partitioning) are also expected to develop at the upper-lower crust (and at the Moho?) transition, as imaged by the available seismic profiling and MT surveys. The whole data implies a significant discontinuity between Cadomian and Variscan Cycles that should have constrained subsequent lithospheric evolution.     

Tectonic zoning of Wrangel Island,Arctic region

The Northern, Central, and Southern zones are distinguished by stratigraphic, lithologic, and structural features. The Northern Zone is characterized by Upper Silurian–Lower Devonian sedimentary rocks, which are not known in other zones. They have been deformed into near-meridional folds, which formed under settings of near-latitudinal shortening during the Ellesmere phase of deformation. In the Central Zone, mafic and felsic volcanic rocks that had been earlier referred to Carboniferous are actually Neoproterozoic and probably Early Cambrian in age. Together with folded Devonian–Lower Carboniferous rocks, they make up basement of the Central Zone, which is overlain with a angular unconformity by slightly deformed Lower (?) and Middle Carboniferous–Permian rocks. The Southern Zone comprises the Neoproterozoic metamorphic basement and the Devonian–Triassic sedimentary cover. North-vergent fold–thrust structures were formed at the end of the Early Cretaceous during the Chukchi (Late Kimmerian) deformation phase.     

Structural Analysis of the Multi-layer Detachment Folding in Eastern Sichuan Province

<正>A serial of"comb-like and trough-like"folds developed in eastern Sichuan,controlled by the multi-layer detachment folding,is different from the classical Jura-type structure in their development.The key factor resulting in the development of these structures is the occurrence of detachment layers in different parts of Neoprotozoic to Mesozoic stratigraphy of study area,which, from the bottom to the top,are the lower part of Banxi Group,Lower Cambrian(Niutitang Formation),Lower Silurian(Longmaxi Formation and Luoreping Formation),Upper Permian (Wujiaping Formation) and Lower Triassic(Daye Formation).On the basis of field survey combined with sand-box modeling,this study argued that the detachment layer of the lower part of Banxi Group controlled the development of the"comb-like"folds,and the lower part of Cambrian detachment layer controlled the development of"trough-like"folds.Because of several detachment layers occurring in the study area,the development of duplex structures different scales is an important deformation mechanism,and the duplexes are the important structures distinguished from the typical detachment folding structures.Due to these duplexes,the surface structures and structural highs may not be the structural highs in the depth.Meanwhile,the detachment layers are good channels for oil/ gas migration benefiting the understanding of accumulation and migration of oil and gas.     

Kinematic evolution of fold-and-thrust belts in the Yubei-Tangbei area:Implications for tectonic events in the southern Tarim Basin

The Yubei-Tangbei area in the southern Tarim Basin is one of the best-preserved Early Paleozoic northeast-southwest trending fold-and-thrust belts within this basin.This area is crucial for the exploration of primary hydrocarbon reservoirs in northwestern China.In this study,we constructed the structural geometric morphology of the Yubei-Tangbei area using geophysical logs,drilling,and recent two-and three-dimensional(2-D and 3-D)seismic data.The Early Paleozoic fault-propagation folds,the Tangnan triangle zone,fault-detachment folds,and trishear fault-propagation folds developed with the detachment of the Middle Cambrian gypsum-salt layer.According to a detailed chronostratigraphic framework,the growth strata in the Upper Ordovician-Lower Silurian layer formed by onlapping the back limb of the asymmetric fault-propagation folds,which therefore defines the timing of deformations.The changes in kink band hinges and amplitudes in the Permian-Carboniferous and Cenozoic folding strata suggest that the evolution of the fold-and-thrust belts followed a sequential evolution process rather than a simultaneous one.Above the pre-existing Precambrian basement structure,the Yubei-Tangbei fold-and-thrust belts can be divided into four tectonic evolution stages:Late Cambrian,Late Ordovician to Early Carboniferous,Carboniferous to Permian,and Cenozoic.The northwestern-verging Cherchen Fault is part of the piedmont fold-and-thrust system of the southern Tarim foreland basin.We interpreted its strata as a breakthrough trishear fault-propagation fold that developed in three phases:Mid-Late Ordovician,Silurian to Middle Devonian,and Triassic to present.These tectonic events are responses of the Altyn-Tagh and Kunlun collisional orogenic belts and the Indian-Eurasian collision.The inherited deformation and structural modification in the southern Tarim Basin may be an indicator of the growth and evolution of peripheral orogens.     

Structural geometry and controls on basement‐involved deformation in the northern Flinders Ranges,Adelaide Fold Belt,South Australia

In the northern Flinders Ranges, Neoproterozoic and Cambrian sedimentary rocks were deformed and variably metamorphosed during the ca 500 Ma Cambro‐Ordovician Delamerian Orogeny. Balanced and restored structural sections across the northern Flinders Ranges show shortening of about 10–20%. Despite the presence of suitable evaporitic detachment horizons at the basement‐cover interface, the structural style is best interpreted to be thick‐skinned involving basement with only a minor proportion of the overall shortening accommodated along stratigraphically controlled detachments. Much of the contractional deformation was localised by the inversion of former extensional faults such as the Norwest and Paralana Faults, which both controlled the deposition of Neoproterozoic cover successions. As such, both faults represent major, long‐lived structures which effectively define the present boundaries of the northern Flinders Ranges with the Gawler Craton to the west and the Curnamona Craton to the east. The most intense deformation, which resulted in exhumation of the basement along the Paralana Fault to form the Mt Painter and Babbage Inliers, coincides with extremely high heat flows related to extraordinarily high heat‐production rates in the basement rocks. High heat flow in the northern Flinders Ranges suggests that the structural style not only reflects the pre‐Delamerian basin architecture but is also a consequence of the reactivation of thermally perturbed, weakened basement.     

Cenozoic tectonics and landform evolution of the coast and adjacent highlands of southeast New South Wales

The Upper Precambrian and Lower Palaeozoic Rocks in the Mt Lofty Ranges, South Australia, have been subjected to at least three phases of folding. The first involved the formation of inclined folds and less common reclined folds. These structures are overprinted by usually upright, moderately tight, second and third generation folds which may show a well developed axial plane crenulation cleavage.

The metamorphism commenced prior to the appearance of penetrative structures and continued in many areas until after the third phase of deformation. It appears to have had its greatest effect during the static period following the first phase of folding.

Mineral assemblages of the pelitic rocks indicate that the metamorphism is of the low pressure‐intermediate type and that there are at least four progressive zones of metamorphism, namely, chlorite, biotite, andalusite‐staurolite, and sillimanite. Cordierite occurs in the sillimanite zone and kyanite is sporadically distributed in the andalusite‐staurolite zone. In the Angaston‐Springton region separate andalusite and staurolite zone boundaries may be delineated which cross as they are traced towards Angaston. This relationship is considered to be due to higher pressures operating during metamorphism in the latter area.

The maximum pressure and temperature reached in the metamorphism of these rocks are discussed in the light of recent experimental data.     

The establishment of recumbent folds in the Lower Palaeozoic near Queanbeyan,New South Wales

Lower Palaeozoic sedimentary and volcanic rocks east of Queanbeyan, N.S.W., have undergone multiple deformation resulting in four systems of folds. The first of these consists of large isoclinal, recumbent folds (F1). The second generation folds (F2) are the most pronounced; they consist of flattened flexural‐slip folds with well developed axial‐plane slaty cleavage. Minor variants of this system are associated with meridionally‐trending faults. Third and fourth generation folds are minor kink systems.

The existence of first generation folds was established on the basis of F2 fold‐facing determinations, and their likely form was deduced from the geometrical variations of F2 folds. It is thought that all fold phases developed during the Late Silurian Bowning Orogeny.     

Superposed folding in the Rockley district,Lachlan Fold Belt,New South Wales

Low grade metasediments and metavolcanics of the Hill End Synclinorial Zone within the Rockley district, NSW have experienced two phases of macroscopic folding (D1 and D2), both of which are post‐latest Silurian in age. No hiatus is evident between D1 and D2. D1 produced large Fi folds (λ/2 usually > 2 km) lacking mesoscopic elements and having variable axial trends. D2 was associated with the development of regional slaty cleavage (S2) and mesoscopic folds which are parasitic on plunging macroscopic F2 folds (λ/2=0.4–2 km). D2 strain is variable, being most intense in the north of the district where slaty cleavage and tight mesoscopic F2 folds are well developed, and weakest in the south where mesoscopic folds are absent or usually gentle and cleavage is often feebly developed even in mica‐rich rocks, which are stratigraphic equivalents to slates and schists in the north. The F1 fold mechanism may involve multiple folding, simultaneous folding in more than one direction, or complex buckling of layers of variable thickness. D1 and D2 are tentatively correlated with folding events elsewhere in the Hill End Synclinorial Zone.     

Unexpected Jurassic to Neogene vertical movements in ‘stable’ parts of NW Africa revealed by low temperature geochronology

In Morocco, it is generally considered that post‐Hercynian vertical movements were limited to the Atlas system, the passive continental margin and the Rif. Apatite FT and He ages from the Moroccan Meseta (Rehamna and Zaer Massif) document instead two episodes of subsidence and exhumation in Jurassic‐Early Cretaceous and during the Late Cretaceous to Neogene. The Meseta subsided to >3 km depth during the Late Triassic to Middle Jurassic and was exhumed to the surface before the Late Cretaceous, during the rift and post‐rift stages of Central Atlantic opening. Erosion of the exhuming rocks is responsible for a thick package of terrigenous sands found in the Moroccan offshore and elsewhere along the NW Africa margin. About 1 km of subsidence affected the Meseta during the Late Cretaceous to Eocene. During the Neogene, these areas were brought back to the surface in association with bimodal folding with wavelengths of 100–150 km and >500 km.     

Centrifuge modelling of deformation of a multi-layered sequence over a ductile substrate: 1. Style and 4D geometry of active cover folds during layer-parallel shortening

Centrifuge analogue modelling illustrates the progressive development of active folds in multilayers upon a ductile substrate during layer-parallel shortening. Models simulate folding of a mechanically stratified sedimentary sequence upon migmatitic gneisses in a large hot orogen, or upon a thick basal evaporite ± shale sequence in deeper levels of fold belts. The absence of a weak low-viscosity and low-density layer at the interface promotes infolding of the cover sequence and ductile substrate, whereas a planar upper surface to the basal ductile substrate is preserved when it is present. Whilst fold style, wavelength, and deformation of the interface with the ductile substrate differ depending on whether a low-viscosity and low-density layer is present at the base of the cover sequence, there is no marked systematic curvature of fold axes as seen in previous sandbox models for fault-bend or fault propagation folding during bulk shortening. Bulk shortening of a layered sequence with relatively thick individual layers above a ductile substrate promotes a regular and upright train of buckle folds, whereas thinner layers promote a more irregular distribution of buckle folds with variable vergence, style, and amplitude. Buckle folds above a ductile substrate progressively develop during bulk shortening from open and upright, to angular and tight, and may further develop into cuspate structures above relatively weak horizons. Relatively thick weak horizons within the layered sequence during bulk shortening interrupt regular fold patterns up structural section and allow out-of-phase folds to develop above and below the weak horizon.     

Structural setting and genesis of ore bodies in carbonate rocks in the M.te Atzei-M.te Ega mining area (Sulcis,SW Sardinia)

At least seven different types of ore bodies, with an ore stock of Ba, F, Fe, Pb, Zn, Cu and Sb occur in Paleozoic rocks (Lower-Middle Cambrian and Ordovician) in an ?15 km² area north of the Narcao village (SW Sardinia, Italy). The ore bodies are related both to syngenetic accumulations, and later epigenetic recirculation of the primary ores. In the Lower Cambrian the area studied shows evidence of synsedimentary tectonic instability, probably related to carbonate shelf margin features. The Upper Cambrian is lacking and the transgressive Ordovician sediments cover large areas of the previously gently folded Cambrian rocks (Sardic phase of Caledonian orogenesis). The main Hercynian tectonic phases had a much stronger compressive folding that is mirrored in a sequence of tight folds and upthrusts. The geometric setting resulting from the tectonic frame of the Cambrian and Ordovician sediments must be taken into account to understand the distribution and the genesis of most of the ore bodies.     

Structure of the Patagonian Andes: Regional Balanced Cross Section at 50° S,Argentina

A 100 km long balanced structural transect is presented for the Patagonian Andes at 50° S Latitude. The area studied is characterized by a fold belt in the eastern Andean foothills and basement-involved thrusts in a western-basement thrust zone. The basement thrust zone exposes pre-Jurassic, polydeformed sedimentary and layered metamorphic rocks emplaced over Lower Cretaceous rocks above an E-vergent thrust located at the western end of the fold belt.

The fold belt is developed in a 3 km thick deformed Cretaceous–Paleogene sedimentary cover with few basement outcrops and scarce calc-alkaline magmatism. Cover structures related to shallow décollements have a N-S to NW-SE strike, with fold wavelengths from 1100 to 370 m in the east to 20 to 40 m in the west. However, long-wavelength basement-involved structures related to deeper décollements have a dominant N-S to NE-SW trend along the eastern and western parts of the fold belt. Field evidence showing different degrees of inversion of N-S–trending normal faults suggests that the orientation of the Cenozoic compressive basement structures was inherited partially from the original geometry of Mesozoic normal faults.

The deformation propagated toward the foreland in at least two events of deformation. The effects of Paleogene (Eocene?) compressive episode are observed in the western fold belt and a Neogene (Late Miocene) compressive episode is present in the eastern fold belt. Basement-involved structures typically refold older cover structures, producing a mixed thick and thin-skinned structural style. By retrodeforming a regional balanced cross section in the fold belt, a minimum late Miocene shortening of 35 km (26%) was calculated.     

Linking deformation, migmatite formation and zircon U–Pb geochronology in polymetamorphic orthogneisses, Sveconorwegian Province, Sweden

Absolute ages of migmatization in the polymetamorphic, parautochthonous basement of the Sveconorwegian Province, Sweden, have been determined using U–Pb ion probe analysis of zircon domains that formed in leucosome of migmatitic orthogneisses. Migmatite zircon was formed by recrystallization whereas dissolution–reprecipitation and neocrystallization were subordinate. The recrystallized migmatite zircon was identified by comparison of zircon in mesosomes and leucosomes. It is backscatter electron‐bright, U‐rich (800–4400 ppm) with low Th/U‐ratios (generally 0.01–0.1), unzoned or ‘oscillatory ghost zoned’, and occurs as up to 100 μm‐thick rims with transitional contacts to cores of protolith zircon. Protolith ages of 1686 ± 12 and 1668 ± 11 Ma were obtained from moderately resorbed, igneous zircon crystals (generally Th/U = 0.5–1.5, U < 300 ppm) in mesosomes; protolith zircon is also present as resorbed cores in the leucosomes. Linkage of folding, synchronous migmatization and formation of recrystallized zircon rims allowed direct dating of south‐vergent folding at 976 ± 7 Ma. At a second locality, similar recrystallized zircon rims in leucosome date pre‐Sveconorwegian migmatization at 1425 ± 7 Ma; an upper age bracket of 1394 ± 12 Ma for two overprinting phases of deformation (upright folding along gently SSW‐plunging axes and stretching in ESE) was set by zircon in a folded metagranitic dyke. Lower age brackets for these events were set at 952 ± 7 and 946 ± 8 Ma by zircon in two crosscutting and undeformed granite–pegmatite dykes. Together with previously published data the present results demonstrate: (i) Tectonometamorphic reworking during the Hallandian orogenesis at 1.44–1.42 Ga, resulting in migmatization and formation of a coarse gneissic layering. (ii) Sveconorwegian continent–continent collision at 0.98–0.96 Ga, involving (a) emplacement of an eclogite unit, (b) regional high‐pressure granulite facies metamorphism, (c) southvergent folding, subhorizontal, east–west stretching and migmatization, all of which caused overprint or transposition of older Mesoproterozoic and Sveconorwegian structures. The Sveconorwegian migmatization and folding took place during or shortly after the emplacement of Sveconorwegian eclogite and is interpreted as a result of north–south shortening, synchronous with east–west extension and unroofing during late stages of the continent–continent collision.     

Facies distribution of the Lower Cambrian cryptic microbial and epibenthic archaeocyathan-microbial communities, western Anti-Atlas, Morocco

Marine microbial communities recorded in the Moroccan Anti‐Atlas were unaffected across the Neoproterozoic–Cambrian transition. A stromatolite‐dominated consortium was replaced at the beginning of the Atdabanian (ca 20 Myr after the Neoproterozoic–Cambrian boundary) by shelly metazoan and thromboid consortia, which contain the oldest biostratigraphically significant fossils of the Moroccan Cambrian. The associated collapse of microbial mat (stromatolitic) growth appears to coincide with a change from pre‐Atdabanian shallow‐water restricted conditions into Atdabanian deeper, open‐sea conditions. It is postulated that this environmental change led to an episode of improved water circulation over carbonate platform interiors, promoting shelly metazoan immigration into the region. The Tiout/Amouslek lithostratigraphic contact in the early Atdabanian marks the end of an episodically unstable seafloor as suggested by the abundance of slumping and sliding structures, and synsedimentary microfaults and cracks recorded in the underlying Tiout Member. Concurrent with the transition is the occurrence of a network of cryptic fissures and cavities that provided habitats for a coelobiontic chemosynthetic–heterotrophic microbial community composed of stromatolitic crusts, Renalcis–Epiphyton–Girvanella intergrowths, and Kundatia thalli. In the overlying Amouslek Formation, archaeocyathan–thromboid reefs were constrained by substrate stability, water depth and subsidence rate. Four reef geometries are distinguished: (i) patch reefs surrounded by shales, (ii) bioherms in which flank beds intercalate laterally with carbonate and shale inter‐reef sediments, (iii) biostromes or low‐relief structures formed as a result of lateral accretion of patch reefs, and (iv) kalyptrate complexes that nucleated because of a marked tendency for aggregation, and in which patch reefs and bioherms occur stacked together bounded by clay–marl–silt seams.