首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Chitosan composites and derivatives have gained wide attentions as effective biosorbents due to their low costs and high contents of amino and hydroxyl functional groups. They have showed significant potentials of removing metal ions, dyes and pro- teins from various media. Chemical modifications that lead to the formation of the chitosan derivatives and chitosan composites have been extensively studied and widely reported in literatures. The aims of this review were to summarize the important information of the bioactivities of chitosan, highlight the various preparation methods of chitosan-based active biosorbents, and outline its potential applications in the adsorption of heavy metal ions, dyes and proteins from wastewater and aqueous solutions.  相似文献   

2.
Chitosan composites and derivatives have gained wide attentions as effective biosorbents due to their low costs and high contents of amino and hydroxyl functional groups. They have showed significant potentials of removing metal ions, dyes and proteins from various media. Chemical modifications that lead to the formation of the chitosan derivatives and chitosan composites have been extensively studied and widely reported in literatures. The aims of this review were to summarize the important information of the bioactivities of chitosan, highlight the various preparation methods of chitosan-based active biosorbents, and outline its potential applications in the adsorption of heavy metal ions, dyes and proteins from wastewater and aqueous solutions.  相似文献   

3.
This study investigated the removal of heavy metal ions from cigarette mainstream smoke using chitosan. Chitosan of various deacetylation degrees and molecular weights were manually added to cigarette filters in different dosages. The mainstream smoke particulate matter was collected by a Cambridge filter pad, digested by a microwave digestor, and then analyzed for contents of heavy metal ions, including As(III/V), Pb(II), Cd(II), Cr(III/VI) and Ni(II), by graphite furnace atomic absorption spectrometry (GFAAS). The results showed that chitosan had a removal effect on Pb(II), Cd(II), Cr(III/VI) and Ni(II). Of these, the percent removal of Ni(II) was elevated with an increasing dosage of chitosan. Chitosan of a high deace tylation degree exhibited good binding performance toward Cd(II), Cr(III/VI) and Ni(II), though with poor efficiency for Pb(II). Except As(III/V), all the tested metal ions showed similar tendencies in the growing contents with an increasing chitosan molecular weight. Nonetheless, the percent removal of Cr(III/VI) peaked with a chitosan molecular weight of 200 kDa, followed by a dramatic decrease with an increasing chitosan molecular weight. Generally, chitosan had different removal effects on four out of five tested metal ions, and the percent removal of Cd(II), Pb(II), Cr(III/VI) and Ni(II) was approximately 55%, 45%, 50%, and 16%, respectively. In a word, chitosan used in cigarette filter can remove toxic heavy metal ions in the mainstream smoke, improve cigarette safety, and reduce the harm to smokers.  相似文献   

4.
INTRODUCTIONThetoxicityofheavymetalsreleasedintotheenvironmenthasrecentlytriggeredanumberofstudiesaimingattheremovalofmetalionsfromaqueoussolutions (FourestandVolesky ,1 997;FehrmannandPohl,1 993 ;KuyucakandVolesky,1 989) .Itwasfoundthattheaccumulationofheavymeta…  相似文献   

5.
Analgesis and wound healing effect of chitosan and carboxymethyl chitosan on scalded rats were investigated. A II degree scald model was established in rats, which was subsequently treated with chitosan and carboxymethyl chitosan solution, respectively. The concentration of bradykinin and 5-hydroxytryptophan was detected by assaying enzyme-linked immunosorbent. Healing condition was observed and pathological sections were made to determine the healing effect of chitosan and carboxymethyl chitosan. Results showed that the concentration of bradykinin and 5-hydroxytryptophan peaked at the third hour post-wound in all groups, while the concentration of hydroxyproline peaked at the seventh day post-wound in both chitosan and carboxymethyl chitosan group. The concentration of bradykinin and 5-hydroxytryptophan of carboxymethyl chitosan group was significantly lower than that of control (P < 0.05), while that of chitosan group was similar to that of control (P > 0.05). These findings indicated that carboxymethyl chitosan reduced the concentration of algogenic substances, resulting in analgesia. During the whole recovery process, the hydroxyproline concentration in chitosan and carboxymethyl chitosan group on day 3 and 7 was significantly higher than that of control (P < 0.01); however the significance of such a highness decreased on day 14 (P < 0.05). These findings indicated that chitosan and carboxymethyl chitosan accelerated tissue repair. Meanwhile, chitosan performed better in healing than carboxymethyl chitosan in both decrustation and healing time. In conclusion, carboxymethyl chitosan showed significant analgesis and wound-healing promotion effect, but chitosan only showed wound-healing promotion effect.  相似文献   

6.
Photochemical oxidation of benzothiophene in seawater   总被引:3,自引:0,他引:3  
INTRODUCTIONphotochemicaloxidationofbenzothiopheneinseawaterinordertolearnmoreabouttheremovalpatternofthispollutantinmarineenvironments.Benzothiophenewaschosenforthisstudysinceitisthesimplest  Thehigh -pressuremercurylampusedinthisstudycouldproducelig…  相似文献   

7.
In order to synthesize an improved adsorbent for heavy metal ions, we studied the condensation reaction of chitosan with salicylaldehyde in ethanol to form a Schiff base. The effect irradiating the reaction using an ultrasonic liquid processor was contrasted with conventional methods. The IR spectra of condensed chitosan prepared by the two methods showed that their molecular structures were identical. The reaction conditions, including solvents, ultrasonic power density and irradiation time, pH, and reactant ratio, were optimized by orthogonal design. A shorter reaction time and a higher product yield were obtained using ultrasonic-assisted synthesis compared with the traditional method. A condensation degree of 89.63% was achieved using the optimized conditions: i.e. ultrasonic irradiation at 180 W for 60 min; 95% ethanol as the solvent, pH 4.0, and salicylaldehyde:chitosan ratio of 6:1.  相似文献   

8.
1 IntroductionHydrophobically modified water-soluble polymers,also known as hydrophobized polymers, are thosemodified by hydrophobic groups such as alkyl,arolkyl, and deoxycholic acid. In water, they canself-aggregate due to their intro- and/or intermolecularhydrophobic interaction. By this process, unique hy-drogel nanoparticles with hydrophobic core and hy-drophilic shell can be prepared, which is a new ap-proach to preparing the monodispersed hydrogelnanoparticles (Whitesides et al., 1991; …  相似文献   

9.
1IN T R O D U C T IO N With therapiddevelopment of urbanizatio,nurban land was exploitedand utilizetdoform differendtomains be- ing subjectto many potentialpollutionsourcessuch as vehicleemission, industrialactivitieasnd household garbage.Particularl, yur…  相似文献   

10.
In this study,the water-based ferromagnetic fluid and magnetic resin made from chitosan and cerium complex(MRCCC) were successfully prepared by using the chemical co-precipitation technique and by the reversed-phase suspension cross-linking polymerization.MRCCC presented uniform and narrow particle size distribution as determined by the Laser Particles Sizer.The Inductively Coupled Plasma-Atomic Emission Spectrometry(ICP-AES),Fourier transform infrared spectroscopy(FT-IR),differential scanning calorimetry(DSC)and X-ray powder diffraction(XRD)study demonstrated that there were iron and cerium existing in MRCCC.The movement of MRCCC under magnetic field proved its magnetic property.The swelling kinetics in water or solutions with different pH indicated that MRCCC could be applied in solutions with pH greater than 1.0.The ferromagnetic fluid particles were stable in MRCCC soaked in solutions with pH >2.0.In view of these results,MRCCC can be used as material for separation,clarification,adsorption,sustained release and hydrolysis activity.  相似文献   

11.
Sulfate chitosan derivatives have good solubility and therapeutic effect on the cell model of NAFLD. The aim of this study was to examine the therapeutic effect of sulfate chitosan derivatives on NAFLD. The male Wistar rats were orally fed high fat emulsion and received sulfate chitosan derivatives for 5 weeks to determine the pre-treatment effect of sulfate chitosan derivatives on NAFLD. To evaluate the therapeutic effect of sulfate chitosan derivatives on NAFLD, the rats were orally fed with high concentration emulsion for 5 weeks, followed by sulfate chitosan derivatives for 3 weeks. Histological analysis and biomedical assays showed that sulfate chitosan derivatives can dramatically prevent the development of hepatic steatosis in hepatocyte cells. In animal studies, pre-treatment and treatment with sulfate chitosan derivatives significantly protected against hepatic steatohepatitis induced by high fat diet according to histological analysis. Furthermore, increased TC, ALT, MDA, and LEP in NAFLD were significantly ameliorated by pre-treatment and treatment with sulfate chitosan derivatives. Furthermore, increased TG, AST, and TNF-α in NAFLD were significantly ameliorated by treatment with sulfate chitosan derivatives. Sulfate chitosan derivatives have good pre-treatment and therapeutic effect on NAFLD.  相似文献   

12.
从甲壳素出发,先制备了3种不同脱乙酰度的壳聚糖,选择过硫酸铵_亚硫酸氢钠为氧化还原体系引发剂,合成了壳聚糖接枝丙烯酰胺聚合物;通过红外光谱,电镜扫描对聚合物进行结构表征,结果表明壳聚糖结构发生了变化,通过在相同条件下比较壳聚糖不同脱乙酰度对接枝率的影响,得出了在脱乙酰度为68.5%时聚合物的接枝率最大为250%,其最佳合成工艺为∶m(壳聚糖)∶m(丙烯酰胺)=1∶5,引发剂用量为体系质量分数的0.3%~0.4%,温度55~60℃,反应时间为2.5~3.0 h。  相似文献   

13.
新型壳聚糖季铵盐衍生物的合成与表征   总被引:2,自引:0,他引:2  
采用甲磺酸作为溶剂兼作氨基保护试剂,对壳聚糖上的羟基选择性酯化,再游离出氨基并对其氯乙酰化,最后进行吡啶成盐,得到新型水溶性的壳聚糖季铵盐衍生物,产物的结构通过核磁共振氢谱和红外光谱进行了表征,从而为壳聚糖季铵盐衍生物的制备提供了一种新途径。  相似文献   

14.
15.
The present paper reports Zn,Cu,Pb,Cd,Ni,Fe,Mn and Co contents in the tissues of oyster,solen,red-tail prawn,sea eel and kelp,taken from Meizhou Bay(and analysed by flame atomicabsorption spectrophotometry after wet digestion)in June 1992,and also the concentration factors esti-mated from the mean metal concentrations in the organisms and water there.Heavy metal concentrationsin every species of the organisms followed the pattern:Fe,Mn,Cu,Zn>Pb,Cd,Ni,Co and in variousorganisms showed considerable variation.In general,levels of most of these metals were in the order:softtissues of the bivalves>the kelp>muscles of the red-tail prawn,the sea eel.The greatest concentrationof most metals was found in the gill or viscera of the sea eel,whereas the muscle tissues,in general,con-tained only low concentrations of them.The Cu,Zn concentration factors of the oyster were higher by1—2 orders of magnitude than that of the other organisms.The observed heavy metal levels were closeto those reported from various waters  相似文献   

16.
In order to determine and assess the concentrations of trace elements in coral reefs sediments from Red Sea of Yemen, sediment samples were collected, treated and analyzed for cadmium, chromium, cobalt, copper, manganese, nickel, iead, iron, zinc and vanadium by the atomic absorption spectrometric analysis. The result is that cadmium, cobalt and lead concentrations were high and other elements are low or the same as natural background. It is concluded that the high cadmium, cobalt and lead levels in coral reefs sediments will have negative effects on marine life of the sites, so further researches are needed to characterize the sources fate, biogeochemical processes and impacts of these trace elements on coral reefs and marine of the region.  相似文献   

17.
于2008年3月至2009年1月用电感耦合等离子体质谱法(ICP-MS)对湛江港海水中的铜(Cu)、锌(Zn)、铅(Pb)、镉(Cd)进行调查。分析结果表明:2008年湛江港湾海水中Cu、Zn、Pb、Cd含量较低,年平均含量分别为4.46×10-3mg/L、14.2×10-3mg/L、0.795×10-3mg/L、0.588×10-3mg/L,总体上表层海水中Cu、Zn、Pb、Cd的含量均略低于底层海水。各季度海水中重金属含量的比较结果为:Cu的含量秋季>春季>夏季>冬季,Zn的含量夏季>春季>秋季>冬季,Pb的含量秋季>夏季>春季>冬季,Cd的含量冬季>夏季>秋季>春季。湛江港湾的Cu、Zn、Pb、Cd的含量均在中部水域湛江港码头核心作业区最高,港湾外较低;Zn、Cd在港湾内的含量较高。按照单因子污染指数法评价,湛江港湾海水中的Cu、Zn、Pb、Cd含量均低于国家二类海水水质标准规定的限值,水质较好。  相似文献   

18.
重金属在不同粒径PM10中的含量与形态   总被引:1,自引:0,他引:1  
利用WYX 402A型原子吸收分光光度计和Tessler形态分类法研究了Cu、Pb、Zn、Cd、Cr、As重金属在不同粒径PM10中的质量浓度与形态分布。结果表明Cu、Pb、Cd、As质量浓度随粒径增加而减少,Zn、Cr质量浓度在1.1~2.0μm粒径范围内有一峰值,总体上仍表现为随粒径增加而减少。重金属的形态分布表现出各自的特征,反映了其环境活性的不同。颗粒越细,Cu的活性越大;Pb的活性在各粒级中变化不大;Zn的活性随粒径增加而变大;Cd主要以碳酸盐结合态和氧化物结合态为主,且在小颗粒中活性较大;Cr以氧化物结合态和不溶物为主,在各粒级中含量较稳定,环境活性不大;As主要以前3种形态存在,在稳定环境下,其活性随粒径增加而减小。  相似文献   

19.
In order to determine and assess the concentrations of trace elements in coral reefs sediments from Red Sea of Yemen, sediment samples were collected, treated and analyzed for cadmium, chromium, cobalt, copper, manganese, nickel, lead, iron, zinc and vanadium by the atomic absorption spectrometric analysis. The result is that cadmium, cobalt and lead concentrations were high and other elements are low or the same as natural background. It is concluded that the high cadmium, cobalt and lead levels in coral reefs sediments will have negative effects on marine life of the sites, so further researches are needed to characterize the sources fate, biogeochemical processes and impacts of these trace elements on coral reefs and marine of the region.  相似文献   

20.
通过对滨州近海海域海底沉积物测试数据及海岸带陆域土壤地球化学分析,对滨州海岸带陆域土壤和海底沉积物中7种重金属(Hg,Cd,Pb,Cu,Zn,Cr,Ni)的空间分布特征进行了研究,并绘制了各指标含量陆海联合分区图。分析结果表明,滨州市海岸带重金属元素含量基本上均低于国标规定的海洋一类沉积物的最高标准,仅有个别元素含量超过一级标准值,表明局部存在一定的重金属污染。从滨州海岸带重金属含量空间分布上来看,除Hg元素外,其余重金属元素含量呈现一定的规律,基本上陆域含量高于海域含量,且大部分元素都呈现出陆域城镇值高,郊区值低的态势。区内化工企业较发达,Ni,Cr属于中度变异区,Cd,Hg,Pb属于高度变异,受人为影响因素较大,考虑区内土壤及海底沉积物重金属富集主要来源于工业"三废"。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号