共查询到20条相似文献,搜索用时 31 毫秒
1.
斜向逆冲作用在自然界普遍存在,研究斜向逆冲断层相关褶皱的构造几何学特征,识别断层相关褶皱是否存在斜向逆冲有重要意义。文章采用Trishear 4.5、Gocad以及Trishear3D软件构建一系列不同滑移量的断层转折褶皱和断层传播褶皱的二维正演剖面,通过连接一系列不同排列方式的二维剖面建立了三种不同逆冲滑移方向的断层转折褶皱和断层传播褶皱的假三维模型,通过不同假三维模型的比较分析来探讨斜向逆冲断层相关褶皱的构造几何学特征。研究发现,斜向逆冲断层相关褶皱区别于正向逆冲断层相关褶皱的特征主要有两点:① 正向逆冲断层相关褶皱层面等高线图上的最高点与后翼等高线中点的连线以及水平切面上的核心点与后翼中点的连线方向均与断层走向垂直,而斜向逆冲断层相关褶皱的最高点以及核心点与后翼中点的连线方向均与断层走向斜交,并且最高点与后翼等高线中点的连线方向或者核心点与后翼中点的连线方向均与逆冲滑移方向一致;② 在褶皱平行断层走向纵剖面上,正向逆冲断层相关褶皱各个层面最高点的连线是直立的,而斜向逆冲断层相关褶皱各个层面最高点的连线发生倾斜。通过这两个特征可以判别褶皱是否存在斜向逆冲以及逆冲的方向。将模型分析结果运用到四川盆地西南部三维地震勘探资料所覆盖的邛西背斜和大兴西背斜的实例中。研究结果表明,两个背斜均存在右旋斜向逆冲,逆冲方向与各自断层走向的夹角均为70°左右,邛西背斜和大兴西背斜的逆冲方向分别是NE79°和NE77°左右,这与龙门山南段晚上新世以来的主应力方向以及反演的汶川地震最大主应力方向一致。 相似文献
2.
JIA Qiupeng JIA Dong LUO Liang CHEN Zhuxin LI Yiquan DENG Fei SUN Shengsi LI Haibin 《《地质学报》英文版》2009,83(2):372-385
Fold terminations are key features in the study of compressional fault-related folds. Such terminations could be due to loss of displacement on the thrust fault or/and forming a lateral or oblique ramp. Thus, high-quality seismic data would help unambiguously define which mechanism should be responsible for the termination of a given fault-related fold. The Qiongxi and Qiongxinan structures in the Sichuan Basin, China are examples of natural fault-propagation folds that possess a northern termination and a structural saddle between them. The folds/fault geometry and along-strike displacement variations are constrained by the industry 3-D seismic volume. We interpret that the plunge of the fold near the northern termination and the structural saddle are due to the loss of displacement along strike. The fault geometry associated with the northern termination changes from a flat-ramp at the crest of the Qiongxinan structure, where displacement is the greatest, to simply a ramp near the northern tip of the Qiongxi structure, without forming a lateral or oblique ramp. In this study, we also use the drainage pattern, embryonic structure preserved in the crest of the Qiongxinan structure and the assumption that displacement along a fault is proportional to the duration of thrusting to propose a model for the lateral propagation of the Qiongxinan and Qiongxi structures. Specifically, we suggest that the structure first initiated as an isolated fault ramp within brittle units. With increased shortening, the fault grows to link with lower detachments in weaker shale units to create a hybridized fault-propagation fold. Our model suggests a possible explanation for the lateral propagation history of the Qiongxinan and Qiongxi structures, and also provides an alternative approach to confirming the activity of the previous Pingluoba structure in the southwestern Sichuan Basin in the late Cenozoic. 相似文献
3.
The leading edge of the ENE-trending Himalayan thrust front in Pakistan exhibits along-strike changes in deformational style, ranging from fault-bend to fault-propagation folds. Although the structural geometry is very gently deformed throughout the Salt Range, it becomes progressively more complex to the east as the leading edge of the emergent Salt Range Thrust becomes blind. Surface geology, seismic reflection, petroleum well, and chronostratigraphic data are synthesized to produce a 3-D kinematic model that reconciles the contrasting structural geometries along this part of the Himalayan thrust front. We propose a model whereby displacement was transferred, across a newly-identified lateral ramp, from a fault-bend fold in the west to fault-propagation folds in the east and comparable shortening was synchronously accommodated by two fundamentally different mechanisms: translation vs. telescoping. However, substantially different shortening distribution patterns within these structurally contrasting segments require a tear fault, which later is reactivated as a thrust fault. The present geometry of this S-shaped displacement transfer zone is a combined result of the NW–SE compression of the lateral culmination wall and associated tear fault, and their subsequent modification due to mobilization of underlying ductile salt. 相似文献
4.
JIA Qiupeng JIA Dong LUO Liang CHEN Zhuxin LI Yiquan DENG Fei SUN Shengsi LI Haibin 《《地质学报》英文版》2009,83(2)
Fold terminations are key features in the study of compressional fault-related folds. Such terminations could be due to loss of displacement on the thrust fault or/and forming a lateral or oblique ramp. Thus, high-quality seismic data would help unambiguously define which mechanism should be responsible for the termination of a given fault-related fold. The Qiongxi and Qiongxinan structures in the Sichuan Basin, China are examples of natural fault-propagation folds that possess a northern termination and a structural saddle between them. The folds/fault geometry and along-strike displacement variations are constrained by the industry 3-D seismic volume. We interpret that the plunge of the fold near the northern termination and the structural saddle are due to the loss of displacement along strike. The fault geometry associated with the northern termination changes from a flat-ramp at the crest of the Qiongxinan structure, where displacement is the greatest, to simply a ramp near the northern tip of the Qiongxi structure, without forming a lateral or oblique ramp. In this study, we also use the drainage pattern, embryonic structure preserved in the crest of the Qiongxinan structure and the assumption that displacement along a fault is proportional to the duration of thrusting to propose a model for the lateral propagation of the Qiongxinan and Qiongxi structures. Specifically, we suggest that the structure first initiated as an isolated fault ramp within brittle units. With increased shortening, the fault grows to link with lower detachments in weaker shale units to create a hybridized fault-propagation fold. Our model suggests a possible explanation for the lateral propagation history of the Qiongxinan and Qiongxi structures, and also provides an alternative approach to confirming the activity of the previous Pingluoba structure in the southwestern Sichuan Basin in the late Cenozoic. 相似文献
5.
The inversion of the Middle Proterozoic Belt sedimentary basin during Late Cretaceous thrusting in Montana produced a large eastwardly-convex salient, the southern boundary of which is a 200 km-long oblique to lateral ramp subtended by a detachment between the Belt rocks and Archean basement. A 10 km-long lateral ramp segment exposes the upper levels of the detachment where hanging wall Belt rocks have moved out over the Paleozoic and Mesozoic section. The hanging wall structure consists of a train of high amplitude, faulted, asymmetrical detachment folds. Initial west-east shortening produced layer parallel shortening fabrics and dominantly strike slip faulting followed by symmetrical detachment folding. “Lock-up” of movement on the detachment surface produced regional simple shear and caused the detachment folds to become asymmetrical and faulted. Folding of the detachment surface after lock-up modified the easternmost detachment folds further into a southeast-verging, overturned fold pair with a ramp-related fault along the base of the stretched mutual limb. 相似文献
6.
The map expression of "abrupt" changes in lateral stratigraphic level of a thrust fault has been traditionally interpreted to be a result of the presence of(1) a lateral(or oblique) thrust-ramp,or(2) a frontal ramp with displacement gradient、and/or(3) a combination of these geometries.These geometries have been used to interpret the structures near transverse /ones in fold-thrust belts(FTB).This contribution outlines an alternative explanation that can result in the same map pattern by lateral variations in stratigraphy along the strike of a low angle thrust fault.We describe the natural example of the Leamington transverse zone.which marks the southern margin of the Pennsy lvanian—Permian Oquirrh basin with genetically related lateral stratigraphic variations in the North American Sevier(TB.Thus.the observed map pattern at this zone is closely related to lateral stratigraphic variations along the strike of a horizontal fault.Even though the present-day erosional level shows the map pattern that could be interpreted as a lateral ramp.the observed structures along the Leamington zone most likely share the effects of the presence of a lateral(or oblique) ramp,lateral stratigraphic variations along the fault trace.and the displacement gradient. 相似文献
7.
In the Appalachian thrust belt in Alabama, thrust sheets of Paleozoic strata generally strike northeastward and are imbricated northwestward; four transverse zones cross the regional strike of the thrust belt. The large-scale Pell City thrust sheet ends southwestward at an oblique lateral ramp within the Harpersville transverse zone, where the leading edge of the thrust sheet (the Pell City fault) curves abruptly 55° counterclockwise. The northwest-striking segment of the Pell City fault conforms to the geometry of an oblique lateral ramp in the footwall. Furthermore, the Pell City fault cuts up section in the hanging wall southwestward toward the transverse zone, indicating a hanging-wall lateral ramp emplaced over the footwall oblique lateral ramp.In the hanging wall adjacent to the northwest-trending segment of the Pell City fault, a pervasive train of upright, isoclinal folds (with 50% apparent shortening) trends N15°W, oblique to the regional translation direction. The fold train is limited to the southwestern part of the Pell City thrust sheet; farther northeast, the regional northeasterly strike prevails. The isoclinal folds in the hanging wall indicate contractional crowding perpendicular to the footwall oblique lateral ramp. 相似文献
8.
Ralph Hinsch Charlotte M. Krawczyk Christoph Gaedicke Raul Giraudo Daniel Demuro 《Tectonophysics》2002,355(1-4)
In the area of the Bolivian Orocline, we examine the deformation pattern associated with the active development of a new thrust sheet. A dense grid of reprocessed 2-D seismic lines from hydrocarbon exploration industry is interpreted and a 3-D simplified structural and kinematic model is deduced. In the Boomerang Hills, onlapping Paleozoic and foredeep sediments are detached from the underlying S-dipping basement. They are thrust northeastwards by less than 2 km. Two zones can be differentiated along the Andean deformation front: (1) a W–E to NW–SE striking frontal segment of predominantly orthogonal shortening, comprising a thrust and anticline system; (2) a WSW–ENE striking lateral zone of oblique shortening within a complex system of thin-skinned strike–slip faults and minor folds. The deformation front always follows a pronounced edge in the topography of the top basement surface close to the boundary of the Paleozoic basin. The observed deformation pattern indicates intensified strain partitioning caused by the interaction of contraction direction and basement topography, which provides a near oblique ramp for the onlapping wedge of sediments. The SW–NE thrusting direction is divided into orthogonal and tangential components. These are accommodated by convergent and strike–slip structures, respectively, which sole into a common detachment horizon. The structural evolution of the new thrust sheet in the Bolivian Orocline is primarily controlled by the paleorelief of the Brazilian Shield because: (1) the shape of the basement affects the taper of the thrust wedge and localizes the deformation front and (2) small asperities in/close to the top of the basement promote fault localization. The coincidence of a relatively high basement position and a structural high of the Eastern Cordillera leads to the conclusion that the shape of the Brazilian Shield also controls the structural evolution of the pronounced eastern border of the Bolivian Orocline. 相似文献
9.
Antithetic fault linkages in a deep water fold and thrust belt 总被引:4,自引:0,他引:4
Simon Higgins Richard J. Davies Benjamin Clarke 《Journal of Structural Geology》2007,29(12):1900-1914
Deep water fold and thrust belts consist of both forethrusts and backthrusts that can link along strike to form continuous folds in the overburden. The interaction of faults of opposing dip are termed ‘antithetic thrust fault linkages’ and share the common feature of a switch in vergence of overlying hangingwall anticlines. Using three-dimensional seismic data, on the toe-of-slope of the Niger Delta, linkages are classified into three distinct structural styles. This preliminary classification is based on the vertical extent of faulting within a transfer zones relative to the branch line of the antithetic faults. The stratigraphic level of the lateral tip of the fault, the shape of lateral tip region of a fault plane and the stratal deformation within the transfer zones is also distinctive in each type of fault linkage. A Type 1 linkage comprises faults that overlap exclusively above the level of the branch line. A ‘pop-up’ structure forms within the transfer zone with sediments below remaining planar. The lower tip lines of faults climb stratigraphically towards the linkage zone creating asymmetric, upward-tapering lateral tip regions. In Type 2 linkages fault overlap occurs lower than the level of the branch line such that lateral fault tips are located within the footwall of the counterpart fault. Faulting is thus limited to the deeper section within the transfer zone and creates unfaulted, symmetric, bell-shaped folds in the overburden. Upper tip lines of faults lose elevation within the transfer zone creating asymmetric, downwards-tapering lateral tip regions. In Type 3 linkages both faults continue above and below the branch line within the transfer zone resulting in cross-cutting fault relationships. Horizon continuity across the folds, through the transfer zones, varies significantly with depth and with the type of fault intersection. 相似文献
10.
Andrea Zanchi Paolo D’Adda Stefano Zanchetta Fabrizio Berra 《Swiss Journal of Geoscience》2012,105(1):19-38
The lateral continuity of the E?CW trending thrust sheets developed within the Lower to Middle Triassic cover of the central Southern Alps (Orobic belt) is disturbed by the occurrence of several N?CS trending transverse zones, such as the poorly known Grem?CVedra Transverse Zone (GVTZ). The GVTZ developed during the emplacement of the up to six S-verging thrust sheets consisting of Lower to Middle Triassic units, occurring immediately south of the Orobic Anticlines. The transverse zone, active during thrust emplacement related to the early Alpine compressions which pre-date the Adamello intrusion, includes three major vertical shear zones, the Grem, Pezzel and Zuccone faults. The major structure of the transverse zone is the dextral Grem fault, forming a deep lateral ramp between thrust sheets 3 and 5. A similar evolution also occurred along the Zuccone and Pezzel faults, which show a left-lateral displacement of syn-thrust folds. The Grem fault was later reactivated as an oblique tear fault during the emplacement of the Orobic Anticlines, due to back-thrusting along out-of-sequence thrust surfaces (Clusone fault). Transpressional deformations along the fault zone are recorded by the rotation of major syn-thrust folds, which also suggest a horizontal offset close to 0.5?km. Records of the first stage of evolution of the Grem fault are better preserved along its northern segment, and structural relationships suggest that it propagated southward and downward in the growing thrust stack. The study of the meso and megascopic structures developed along the GVTZ constrains the evolution of the transverse zone, illustrating the complex deformational phenomena occurring in a transpressional regime. The GVTZ probably reflects the existence of pre-existing tectonic lineaments with a similar orientation. Evidence of pre-existing structures are not preserved in the exposed units, nevertheless the N?CS extensional fault systems that characterize the Norian to Jurassic rifting history of the Lombardian basin are valid candidates. 相似文献
11.
《Journal of Structural Geology》1988,10(8):813-828
Detailed (1:60 scale) mapping of the Fort Foster Brittle Zone in the mylonitic Rye Formation of southernmost Maine has revealed the intricate internal duplex structure of a system of probable Paleozoic-age dextral strike-slip faults that have produced abundant pseudotachylyte and minor breccia. The internal configuration of this brittle zone consists of a mosaic of individual pseudotachylyte generation zones as slab-duplex structures. Individual duplex zones are up to 100 m in length and 1 m or less in width and are defined by pairs of layer-parallel slip surfaces along which frictional melts were produced. These slab-duplex structures are interpreted as zones of displacement transfer between long, overlapping, layer-parallel en échelon strike-slip fault surfaces. Contractional duplexes develop layer-parallel compressional structures that tend to shorten and thicken the fault-bounded slabs by the formation of lateral ramps and conjugate faults, kinks and asymmetric folds. Extensional duplexes develop layer-parallel stretching and thinning by the formation of oblique dextral shears, high-angle conjugate pairs and localized fault breccias. The production of pseudotachylyte by friction melting along layer-parallel fault surfaces in these exposures is attributed to rapid slip during paleoseismic events. The rupture structures developed during these events may be characteristic of fault structure and mechanics at near-focal depths in a strike-slip seismogenic zone. 相似文献
12.
黔南地区古生代正断层对构造特征的制约 总被引:2,自引:1,他引:1
黔南地区发育东西向的古生代正断层以及南北向的中、新生代逆冲断层和褶皱。通过对地层、褶皱和断层的平面展布、野外地质调查以及地震剖面的解释,结合雪峰隆起的逆冲推覆特征,研究黔南地区古生代正断层对构造特征的制约作用。研究结果表明东西向的古生代正断层在中、新生代的构造变形过程中起构造转换带的作用。通过建立区内构造转换带的几何学模型,对地震线上的构造变形特征进行了解释。在构造转换带(正断层)附近,断层上盘逆冲推覆不明显;在远离断层处,逆冲断层和与断层相关的褶皱发育。随着距离断层面越来越远,构造转换带(正断层)下盘地层的逆冲推覆特征逐渐消失。 相似文献
13.
构造转换带在逆冲断裂带中具有调节主干逆冲断层之间位移的作用。根据相邻主干逆冲断层在剖面上的组合关系并结合塔里木盆地中央隆起区的研究成果,将挤压区构造转换带分为相向倾斜、背向倾斜和同向倾斜型3类。相向倾斜型在转换带部位发育背冲断块样式,背向倾斜型通过逆冲三角带实现逆冲断层的倾向转换,同向倾斜型通过叠瓦构造实现断层位移的转换。分析了影响构造转换带形成的因素,认为基底构造、滑脱层、沉积相与岩性差异以及应力作用方式等对转换带形成具有重要影响。构造转换带是构造变形相对复杂的区带,不仅控制着富有机质沉积物的分布,形成有利的油气聚集区带,而且密集的断裂系也为烃类的运移提供了通道,并且有利于发育与断层、背斜有关的各种构造圈闭。 相似文献
14.
The conspicuous curved structures located at the eastern front of the Eastern Cordillera between 25° and 26° south latitude is coincident with the salient recognized as the El Crestón arc. Major oblique strike-slip faults associated with these strongly curved structures were interpreted as lateral ramps of an eastward displaced thrust sheet. The displacement along these oblique lateral ramps generated the local N–S stress components responsible for the complex hanging wall deformation. Accompanying each lateral ramp, there are two belts of strong oblique fault and folding: the upper Juramento River valley area and El Brete area.On both margins of the Juramento River upper valley, there is extensive map-scale evidence of complex deformation above an oblique ramp. The N–S striking folds originated during Pliocene Andean orogeny were subsequently or simultaneously folded by E–W oriented folds. The lateral ramps delimiting the thrust sheet coincident with the El Crestón arc salient are strike-slip faults emplaced in the abrupt transitions between thick strata forming the salient and thin strata outside of it. El Crestón arc is a salient related to the pre-deformational Cretaceous rift geometry, which developed over a portion of this basin (Metán depocenter) that was initially thicker. The displacement along the northern lateral ramp is sinistral, whereas it is dextral in the southern ramp. The southern end of the Eastern Cordillera of Argentina shows a particular structure reflecting a pronounced along strike variations related to the pre-deformational sedimentary thickness of the Cretaceous basin. 相似文献
15.
Christian Brandes Daniel Paul Le Heron 《Proceedings of the Geologists' Association. Geologists' Association》2010,121(3):270-280
Fault-propagation folding is an important yet seldom recognised structural style within sediments affected by glacier-induced deformation. Fault-propagation folds develop in the hanging wall of low angle thrust faults and compensate part of the slip along the fault. Field examples are recognised across northern Europe, in glaciotectonic complexes of north Germany, Wales and the Isle of Man. The recognition of the fault-propagation fold mechanism in glaciotectonic deformation is important because resultant structures are related to exactly the same phase of deformation (i.e. the same phase of ice advance), and thus play a critical role in analyses of the temporal and spatial evolution of glacier-induced deformation. Some field examples show monoclinal geometries that are in good agreement with predictions of trishear kinematic theory. The trishear approach is appropriate to model these structures because the structures analysed in the field and simulated below show characteristics that are compatible with fault-propagation folds that were produced by trishear kinematics. The curved forelimb and the monocline geometry of the fault-propagation folds fit to the trishear model. The occurrence of footwall synclines is also in good agreement with trishear kinematics. These synclines show the typical thickening of the strata in the hinge. With respect to the modelling output, most important factors for the structural evolution of the fault-propagation folds is the ramp angle of the thrust, the position of the tip line and the propagation-to-slip ratio along the fault. This fits to observations made by previous studies at large scale fault-propagation folds in fold-and-thrust belts. 相似文献
16.
构造楔形体的形成需要两个条件,一是两条相互连接的断层,二是这两条断层的位移传递方向相反。当反向传递的位移量切割了上覆地层,通常在楔形体前翼形成具指示意义的背斜构造,此类背斜可作为判断深部构造楔形体存在的直接依据。准噶尔盆地南缘3排背斜内带的构造楔形体模式非常典型,并表现为“混序”的特征。在山前深部楔形体沿侏罗系西山窑组煤层向北扩展过程中,部分位移量沿构造楔顶部的反冲断层向南消减,并切割上覆地层形成第一排背斜带,另一部分位移量则继续向北传递,在断坡位置引发褶皱变形,形成第二排和第三排背斜带。在总位移量保持稳定的前提下,这3排背斜带在走向上的此消彼长反映了位移量在南、北两个方向上的转换。准噶尔盆地南缘第二、三排背斜带中-新生界内部发育多个小型的构造楔形体,这些互相叠置的楔形构造横向延伸不大,但有可能构成独立的成藏系统,具有不同的油气水特征,从而造成同一个背斜带不同部位的含油气性迥异。在油气勘探中应通过加强地震采集、处理和解释攻关,力求精细刻画各个楔形构造在三维空间的展布,再针对已落实的楔形体展开钻探。 相似文献
17.
前陆冲断带构造分段特征--以准噶尔盆地西北缘断裂构造带为例 总被引:55,自引:2,他引:55
前陆冲断带普遍具有构造分段的特点。横断层、侧断坡与斜断坡常是构造分段的边界 ,它们起着运动方向、变形速率、构造样式与成因机制转换的作用。准噶尔西北缘前陆冲断带是古生代晚期—中生代早期发展起来的大型冲断推覆系统 ,南自车排子 ,北至夏子街、红旗坝的大型断裂带为其冲断前锋断裂。由于形成时间、活动方式与受力条件等出现变化 ,车排子—夏子街断裂带被北西向的横断层分割为构造样式与地质结构截然不同的三段 ,南段为红山嘴—车排子断裂带 ,构成车排子断隆的东部逆冲边界 ;中段为具压扭性质的克拉玛依—百口泉断裂带 ;北段为具冲断推覆性质的乌尔禾—夏子街断裂带。中生代晚期—新生代以来该前陆冲断带被稳定埋藏 ,构造分段是导致含油气性差异的主要原因 相似文献
18.
库车褶皱冲断带东秋里塔格位移转换构造及其演化--兼论侧断坡相关背斜构造圈闭的形成 总被引:8,自引:3,他引:5
库车褶皱冲断带东秋里塔格构造带发育与侧断坡有关的位移转换构造.东秋里塔格冲断层是一条北倾盲冲断层,其错移地层自西向东逐渐降低,从东秋5井以西的新近系膏盐岩转换至迪那201井的古近系膏盐岩再到迪那11井的侏罗系煤系,地震剖面上侧断坡形态清晰.侧断坡东、西断坪分别是新近系吉迪克组膏盐岩和侏罗系煤系,侧断坡发育在煤上-盐下构造地层组合中.通过DQ99-196、DQ00-226、DQ00-263等构造演化剖面恢复计算,东秋里塔格构造盐上地层位移梯度向西约为103.72m/km,而盐下东秋-迪那段的位移梯度为61.65m/km.在上述地震剖面上,盐上背斜和盐下隐伏背斜的轴线位置发生了相对变化,后者自东向西逐渐向南发生偏移;野外露头观察,盐上背斜的褶皱作用也随之向西增强.在走向上,东秋里塔格构造具有构造分段性,表明侧断坡的位移量变化具有突发性.西段为库车塔吾构造,东段为东秋-迪那构造.库车塔吾构造的盐下隐伏背斜是受东秋里塔格冲断层控制的断层相关褶皱,前、后断坪分别位于吉迪克组膏盐岩和侏罗系煤系,其隐伏的构造楔与南秋里塔格背冲断层组成库车塔吾三角带.东秋-迪那构造的隐伏背斜样式与库车塔吾段相似;但南翼缺乏背冲断层,不具备三角带形态.磷灰石裂变径迹测年表明,侧断坡的发育过程最早可以追索到康村期.东秋里塔格侧断坡相关背斜的形成与自北向南的盲冲断层和区域左行扭压复合作用有关.侧断坡相关背斜的主要构造特征是由侧断坡调节上、下滑脱层之间的应变差异,同时作为油气运移通道沟通气源岩和储层;其油气勘探意义是使得煤系烃源岩生成的天然气向上运移到侧断坡相关背斜构造圈闭如迪那2之中聚集成藏. 相似文献
19.
20.
In northwest Spain thrust sheets occur in an arcuate fold belt. The fault style consists of an array of thrusts, merging downdip into a single décollement surface. Most of the thrust sheets were initiated as thrusts cutting across flat lying beds. Folds above the hanging-wall ramps and some minor structures indicate that the body of the nappes has been subjected to an inhomogeneous simple shear parallel to bedding (y = 1.15), with slip concentrated along bedding planes. This allows the rocks forming the nappe to remain unstrained. At the base of the nappes a thin zone of deformed rock exists. The thrust sheets die out laterally against an anticline-syncline couple, oblique to the thrust direction. A geometrical analysis shows that if anticline and syncline axes are oblique, the thrust sheet was emplaced with a rotational movement, which can be evaluated. As deformation progressed two sets of folds were formed: a circumferential set, following the arc, and a radial set. An arcuate trace of the thrust structures remains after unfolding the radial folds. With a rotational emplacement, the displacement vector for successive points has a progressively greater length, and forms a progressively lower angle with the thrust. The main thrust units are broken into several slices with rotational movements, so that each unit was curved as it was being emplaced, producing a first tightening of the arc. Later folding increased the arc curvature to its present shape. The palaeomagnetic data available support the above conclusions. 相似文献