共查询到20条相似文献,搜索用时 31 毫秒
1.
Abstract A depth-dependent model for the topographic rectification of tidal currents in a homogeneous rotating fluid is used to examine the dependence of the rectified mean flow on various tidal, topographic and frictional parameters. Friction is parameterized through a vertically-uniform, time-independent vertical eddy viscosity and a bottom stress law applied near the top of the constant stress layer. The model neglects the interaction of mean and tidal currents, assumes uniformity along isobaths, and is closed with the assumption of zero depth-averaged mean flow across isobaths. In the limit of depth-independence, the model reduces to that considered by Huthnance (1973) and Loder (1980) which, for weak friction, favours anticyclonic mean circulation around shallow regions and Lagrangian flow which is significantly reduced from the Eulerian. With the inclusion of vertical structure, the magnitude of the anticyclonic flow is amplified suggesting that depth-independent models may underestimate the along-isobath flow. For strong friction the direction of the mean flow depends on the orientation of the tidal ellipse relative to the isobaths. The depthindependent model again underestimates the magnitude of the along-isobath flow, but this can be offset with an appropriate reduction of the bottom friction coefficient. The cross-isobath mean flows are one to two orders of magnitude weaker than the along-isobath flows and generally have more vertical structure. There is also a significant Stokes drift in the cross-isobath direction. Although there is some tendency for the cross-isobath mean bottom current to be down the cross-isobath mean pressure gradient, it appears that it is not generally possible to infer this current from depth-independent models. 相似文献
2.
Vertical mixing by the tides plays a key role in controlling water column structure over the seasonal cycle in shelf seas. The influence of tidal stirring is generally well represented as a competition between surface buoyancy input and the production of turbulent kinetic energy (TKE) by frictional stresses, a competition which is encapsulated in the Qh/u3 criterion. An alternative control mechanism arises from the limitation of the thickness of the bottom boundary layer due to the effects of rotation and the oscillation of the flow. Model studies indicate that, for conditions typical of the European shelf seas, the energy constraint exerts the dominant control but that for tidal streams with large positive polarisation (i.e. anti-clockwise rotation of velocity vector), some influence of rotation in limiting mixing should be detectable. We report here measurements of flow structure (with ADCPs) and turbulent dissipation (FLY Profiler) made at two similar locations in the Celtic Sea which differ principally in that the tidal currents rotate in opposite senses with approximately equal magnitude (polarity P=±0.6). A clear contrast was observed between the two sites in the vertical structure of the currents, the density profile and the rate of dissipation of TKE. At the positive polarity (PP) site (P≈+0.6), the bottom boundary layer in the tidal flow was limited to ∼20 mab (metre above the bed) and significant dissipation from bottom boundary friction was constrained within this layer. At the negative polarity (NP) site (P≈−0.6), the dominant clockwise rotary current component exhibited a velocity defect (i.e. reduction relative to the free stream) extending into the upper half of the water column while significant dissipation was observed to penetrate much further up the water column with dissipation levels ∼10−4.5 W m−3 reaching to the base of the pycnocline at 70–80 mab. These contrasting features of the vertical distribution of dissipation are well reproduced by a 1-D model when run with windstress and tidal forcing and using the observed density profile. Model runs with reversed polarity at the two sites, support the conclusion that the observed contrast in the structure of tidal velocity, dissipation and stratification is due to the influence of tidal stream polarity. Increased positive polarity reduces the upward penetration of mixing which allows the development of stronger seasonal stratification, which, in turn, further inhibits vertical mixing. 相似文献
3.
A three-dimensional prognostic hydrodynamic model in cross sectional form is used to examine the influence of bottom friction,
mixing and topography upon the spin-down and steady-state circulation in a cold water bottom-dome. Parameters characteristic
of the Irish Sea or Yellow Sea cold water domes are used. In all calculations, motion is induced by specifying an initial
temperature distribution characteristic of the dome, and an associated along frontal flow. The spin-down of the dome is found
to be influenced by the coefficient of bottom friction, with a typical time scale of order 10 days, and in general to be independent
of the chosen initial vertical profile of along frontal flow. However, in the case in which the along frontal flow is such
that the near bed velocity is zero, then bottom stress is also zero, and there is no appreciable spin-down. Calculations showed
that the formulation of viscosity and diffusivity had a greater effect upon the steady-state circulation than topography,
suggesting that background mixing of tidal origin is important. The lack of topographic influence was due mainly to the formulation
of the initial conditions which were taken to be independent of topography. The steady-state circulation was characterized
by a cyclonic flow in the surface region, with an anti-cyclonic current near the bed, where frictional effects produced a
bottom Ekman layer and an across frontal flow. This gave rise to vertical circulation cells in the frontal region of the dome
with prevailing downwelling motion inside the dome. A detailed analysis of the dynamic balance of the various terms in the
hydrodynamic equations yielded insight into the processes controlling the steady-state circulation in cold water domes.
Responsible Editor: Phil Dyke 相似文献
4.
A cross-sectional nonhydrostatic model using idealized sill topography is used to examine the influence of bottom friction
upon unsteady lee wave generation and flow in the region of a sill. The implications of changes in shear and lee wave intensity
in terms of local mixing are also considered. Motion is induced by a barotropic tidal flow which produces a hydraulic transition,
associated with which are convective overturning cells, wave breaking, and unsteady lee waves that give rise to mixing on
the lee side of the sill. Calculations show that, as bottom friction is increased, current profiles on the shallow sill crest
develop a highly sheared bottom boundary layer. This enhanced current shear changes the downwelling of isotherms downstream
of the sill with an associated increase in the hydraulic transition, wave breaking, and convective mixing in the upper part
of the water column. Both short and longer time calculations with wide and narrow sills for a number of sill depths and buoyancy
frequencies confirm that increasing bottom friction modifies the flow and unsteady lee wave distribution on the downstream
side of a sill. Associated with this increase in bottom friction coefficient, there is increased mixing in the upper part
of the water column with an associated decrease in the vertical temperature gradient. However, this increase in mixing and
decrease in temperature gradient in the upper part of the water column is very different from the conventional change in near-bed
temperature gradient produced by increased bottom mixing that occurs in shallow sea regions as the bottom drag coefficient
is increased. 相似文献
5.
Residual, or tidally averaged, circulation in fjords is generally assumed to be density driven and two layered. This circulation consists of a thin surface layer of outflow and a thick bottom layer of sluggish inflow. However, development of different vertical structures in residual circulation in fjords can arise from wind, remote, and tidal forcing that may modify the two-layer circulation. Particularly, theoretical results of tidal residual flows in homogeneous semienclosed basins indicate that their vertical structure is determined by the dynamical depth of the system. This dynamical depth can be considered as the ratio between the water column depth and the depth of frictional influence in an oscillatory flow (inverse of Stokes number). When the frictional depth occupies the entire water column, the tidal residual flow is one layered as in shallow basins. But when the frictional depth is only a small portion of the water column (>6 times smaller), the tidal residual is three layered. In relatively deep fjords (say deeper than 100 m), where frictional depths typically occupy a small portion of the water column, the tidal residual flow is expected to be three layered. Ample observational evidence presented here shows a three-layered exchange flow structure in fjords. On the basis of observational and theoretical evidence, it is proposed that the water exchange structure in deep fjords (more than six frictional layers deep, or inverse Stokes number >6) is tidally driven and is three layered. The tidally driven three-layer structure of residual flows could be regarded in some cases as the fundamental structure. However, this structure will only be observed sporadically as it will be masked by wind forcing, remote forcing from the ocean, and freshwater pulses. 相似文献
6.
A weakly nonlinear model is used to examine the mean transverse circulation (cross-isobath) driven by tidal-induced buoyancy flux. The mean Eulerian flows driven by both the barotropic and baroclinic tide are presented for a semi-infinite wedge. The mean flow driven by the barotropic tide is significant only near the apex where the thickness of the frictional boundary layer is comparable to the water depth. The mean flow there is characterized by a single-cell circulation with offshore flow near the bottom, and its magnitude can reach a few percentage or a significant fraction of the tidal velocity in oceanic applications. The mean flow driven by the baroclinic tide, on the other hand, is characterized by pairs of half-open (on the seaward side) counter-rotating cells, the number of which equals the vertical mode number. For a baroclinic tide propagating onshore, the mean flow near the top and bottom surfaces is always directed offshore and its magnitude can reach a large fraction of the tidal velocity. Taken together, the model thus predicts a mean offshore flow near the bottom while higher up in the water column the mean flow direction is less definite due to the contribution from different tidal components. The model results are consistent with some current measurements over the Georges Bank. 相似文献
7.
Patrick L. Murphy Amy F. Waterhouse Tyler J. Hesser Allison M. Penko Arnoldo Valle-Levinson 《Continental Shelf Research》2009
Spatial and temporal variability of the subtidal exchange flow at West Pass, an inlet at the entrance to a subtropical lagoon (St. Andrew Bay, Florida), was studied using moored and towed current velocity profiles and hydrographic data. Towed and hydrographic measurements were captured over one diurnal tidal cycle to determine intratidal and spatial changes in flow. Hydrographic profiles over the tidal cycle showed that tidal straining modified density stratification asymmetrically, thus setting up the observed mean flow within the inlet. During the towed survey, the inlet's mean flow had a two-layer exchange structure that was moderately frictional and weakly influenced by Coriolis accelerations. Moored current profiles revealed the additional contribution to the dynamics from centrifugal accelerations. Along channel residual flows changed between unidirectional and exchange flow, depending on the forcing from the along-estuary wind stress and, to a lesser extent, the spring–neap tidal cycle. Increases in vertical shear in the along channel subtidal flow coincided with neap tides and rain pulses. Lateral subtidal flows showed the influence on the dynamics of centrifugal accelerations through a well-developed two-layer structure modulated in magnitude by the spring–neap tidal cycle. 相似文献
8.
Two diagnostic models, reproducing circulation generated in a marginal sea by variable density, have been developed. The models’ domain is a 2D transverse section for which analytical solutions have been obtained. They describe the winter situation in the northern Adriatic, with a strong vertical mixing present and the density maximum dominating the centre of the basin. Both models employ Boussinesq-type parametrisation of friction and linear slip at the bottom. The first model allows for frictional departure from hydrostatic equilibrium and includes vertical friction only. The second one is hydrostatic but allows for lateral friction as well. The results obtained by the two models are similar and to some extent dependent on the vertical and bottom friction. They reproduce several well known characteristics of the Adriatic circulation (cyclonic surface flow, downwelling in the central and larger part of the basin compensated by upwelling in the coastal zone) but also predict some phenomena that are still not well understood. A conspicuous feature of the model results are coastal jets, which were observed in the Adriatic on several occasions. The present models show that the distance of jets from the coasts depends on lateral friction: it is found to vary from 1 up to 10 km on the Italian side and between 2 and 15 km on the Croatian side. Both models reproduce the west–east asymmetry, with the wider current on the east side of the basin. The asymmetry is a subject on which conflicting empirical results exist in the Adriatic. In the two models cyclonic flow occupies the whole water column, which disagrees with some recent theoretical findings of the near-bottom anticyclonic flow and thus leaves the issue open. 相似文献
9.
Bottom-mounted ADV and ADCP instruments in combination with CTD profiling measurements taken along the Chinese coast of the East China Sea were used to study the vertical structure of temperature, salinity, and velocity in reversing tidal currents on a shallow inner shelf and in rotating tidal flows over a deeper sloping bottom of the outer shelf. These two regimes of barotropic tide affect small-scale dynamics in the lower part of the water column differently. The reversing flow was superimposed by seiches of ∼2.3 h period generated in semienclosed Jiaozhou Bay located nearby. As the tidal vector rotates over the sloping bottom, the height of the near-bottom logarithmic layer is subjected to tidal-induced variations. A maximum of horizontal velocity Umax appears at the upper boundary of the log layer during the first half of the current vector rotation from the minor to the major axis of tidal ellipse. In rotating tidal flow, vertical shear generated at the seafloor, propagated slowly to the water interior up to the height of Umax, with a phase speed of ∼5 m/h. The time-shifted shear inside the water column, relative to the shear at the bottom, was associated with periodically changing increases and decreases of the tidal velocity above the log layer toward the sea surface. In reversing flows, the shear generated near the bottom and the shear at the upper levels were almost in phase. 相似文献
10.
Several field studies in bays and estuaries have revealed pronounced subsurface maxima in the vertical profiles of the current amplitude of the principal tidal harmonic, or of its vertical shear, over the water column. To gain fundamental understanding about these phenomena, a semi-analytical model is designed and analysed, with focus on the sensitivity of the vertical structure of the tidal current amplitude to formulations of the vertical shape of the eddy viscosity. The new analytical solutions for the tidal current amplitude are used to explore their dependence on the degree of surface mixing, the vertical shape of eddy viscosity in the upper part of the water column and the density stratification. Sources of surface mixing are wind and whitecapping. Results show three types of current amplitude profiles of tidal harmonics, characterised by monotonically decreasing shear towards the surface, “surface jumps” (vertical shear of tidal current amplitude has a subsurface maximum) and “subsurface jets” (maximum tidal current amplitude below the surface), respectively. The “surface jumps” and “subsurface jets” both occur for low turbulence near the surface, whilst additionally the surface jumps only occur if the eddy viscosity in the upper part of the water column decreases faster than linearly to the surface. Furthermore, “surface jumps” take place for low density stratification, while and “subsurface jets” occur for high density stratification. The physics causing the presence of surface jumps and subsurface jets is also discussed. 相似文献
11.
Jan Erik H. Weber Kai H. Christensen Cléa Denamiel 《Continental Shelf Research》2009,29(11-12):1448-1453
A new theoretical approach for the wave-induced setup over a sloping beach is presented that takes into consideration the explicit variations of the surface waves due to bottom slope and viscosity. In this way, the wave forcing of the mean Lagrangian volume fluxes is calculated without assuming that the local depth is constant. The analysis is valid in the region outside the surf zone and is based on the shallow-water assumption. A novel approach for separating the viscous damping of the waves from the frictional damping of the mean flow is introduced, where the mean Eulerian velocity is applied in the bottom stress for the mean fluxes. In the case where the onshore Lagrangian mean transport is zero, a new formula is derived for the Eulerian mean free surface slope, in which the effects of bottom slope, viscous wave damping and frictional bottom drag on the mean flow are clearly identified. The analysis suggests that viscous damping of the waves and frictional dissipation of the Eulerian near-bed return flow could lead to setup outside the surf zone. 相似文献
12.
Mr. R. W. James 《Pure and Applied Geophysics》1953,25(1):114-122
Summary The theory of Part I is extended to take account of vertical motion and frictional drag. Surface friction is found not to affect appreciably the propagation speed of troughs and wedges. It is found, further, that the speed of a disturbance at the surface is not appreciably affected by the pattern of vertical motion. However, if the upper part of the perturbation moves at the same speed as the surface wave, a certain pattern of vertical motion is necessary, depending on the morphology of the perturbation, and of the mean flow. 相似文献
13.
The response of the Chesapeake Bay to river discharge under the influence and absence of tide is simulated with a numerical model. Four numerical experiments are examined: (1) response to river discharge only; (2) response to river discharge plus an ambient coastal current along the shelf outside the bay; (3) response to river discharge and tidal forcing; and (4) response to river discharge, tidal forcing, and ambient coastal current. The general salinity distribution in the four cases is similar to observations inside the bay. Observed features, such as low salinity in the western side of the bay, are consistent in model results. Also, a typical estuarine circulation with seaward current in the upper layer and landward current in the lower layer is obtained in the four cases. The two cases without tide produce stronger subtidal currents than the cases with tide owing to greater frictional effects in the cases with tide. Differences in salinity distributions among the four cases appear mostly outside the bay in terms of the outflow plume structure. The two cases without tide produce an upstream (as in a Kelvin wave sense) or northward branch of the outflow plume, while the cases with tide produce an expected downstream or southward plume. Increased friction in the cases with tide changes the vertical structure of outflow at the entrance to the bay and induces large horizontal variations in the exchange flow. Consequently, the outflow from the bay is more influenced by the bottom than in the cases without tide. Therefore, a tendency for a bottom-advected plume appears in the cases with tide, rather than a surface-advected plume, which develops in the cases without tide. Further analysis shows that the tidal current favors a salt balance between the horizontal and vertical advection of salinity around the plume and hinders the upstream expansion of the plume outside the bay. 相似文献
14.
The flow of dense water along continental slopes is considered. There is a large literature on the topic based on observations and laboratory experiments. In addition, there are many analytical and numerical studies of dense water flows. In particular, there is a sequence of numerical investigations using the dynamics of overflow mixing and entrainment (DOME) setup. In these papers, the sensitivity of the solutions to numerical parameters such as grid size and numerical viscosity coefficients and to the choices of methods and models is investigated. In earlier DOME studies, three different bottom boundary conditions and a range of vertical grid sizes are applied. In other parts of the literature on numerical studies of oceanic gravity currents, there are statements that appear to contradict choices made on bottom boundary conditions in some of the DOME papers. In the present study, we therefore address the effects of the bottom boundary condition and vertical resolution in numerical investigations of dense water cascading on a slope. The main finding of the present paper is that it is feasible to capture the bottom Ekman layer dynamics adequately and cost efficiently by using a terrain-following model system using a quadratic drag law with a drag coefficient computed to give near-bottom velocity profiles in agreement with the logarithmic law of the wall. Many studies of dense water flows are performed with a quadratic bottom drag law and a constant drag coefficient. It is shown that when using this bottom boundary condition, Ekman drainage will not be adequately represented. In other studies of gravity flow, a no-slip bottom boundary condition is applied. With no-slip and a very fine resolution near the seabed, the solutions are essentially equal to the solutions obtained with a quadratic drag law and a drag coefficient computed to produce velocity profiles matching the logarithmic law of the wall. However, with coarser resolution near the seabed, there may be a substantial artificial blocking effect when using no-slip. 相似文献
15.
David Dunkerley 《地球表面变化过程与地形》2002,27(1):45-58
This study investigates the contribution of surface tension forces to friction coefficients in shallow, laminar interrill flows. Friction coefficients in these flows are known to be increased greatly by organic litter and by stems. Fine litter provides extensive edges along which surface tension menisci can be drawn up, and evaluating the significance of this in the frictional retardation of flow was the primary objective of the experiments reported here. Using both standardized ‘litter particles’ (small wooden blocks of fixed dimensions) and natural plant litter, meniscus behaviour and the Darcy–Weisbach friction coefficient were evaluated in shallow flows on a laboratory sand board. For some tests, the surface tension of ordinary water was reduced by 40 per cent by the addition of a surfactant, and the friction coefficient redetermined. Results show that the presence of surface tension menisci flanking litter particles provides areas of deeper flow that are up to 7 mm in width and which can increase flow depths by 100–300 per cent. These zones support significantly higher flow speeds. Increased water depths within menisci are additionally associated with reduced depths beyond the menisci, so that an increase in the spatial variability of flow depths is a second consequence of meniscus formation. These modifications of flow depth by surface tension menisci are shown to reduce rather than increase the overall friction coefficient applicable to the flow. Consequently, additional frictional retardation does not arise within the menisci flanking litter particles and so cannot account for the greater drag arising from litter than from other surface features. Different factors, possibly the direct obstruction of flow paths, must therefore underlie the frictional drag. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
16.
H.L. Kuo 《Pure and Applied Geophysics》1997,150(1):143-153
—The boundary layer flows created by the frictional dissipation of the wind speed at the surface in the atmosphere and by surface wind stress in the ocean at the equator and in the equatorial region, are obtained by taking the influence of the surface friction on the zonal velocity as being balanced by vertical transport for the long-term mean flow and by a corresponding time variation for time-dependent flow fields. Solutions are expressed in terms of the velocities in zonal and vertical directions and the divergence of the horizontal current in the two media. It is found that under the ever present easterly flow in the lower atmosphere, the boundary layer flow in the atmosphere is convergence and ascending motion in the lower troposphere, and divergence at the surface and uplift in ocean, and in reverse directions for the westerly flow. Similar results are obtained for time-dependent wind fields and they give way to the steady asymptotic solutions when the period of the variation exceeds 10 months. 相似文献
17.
Observation data of along-estuary and lateral current velocities over a transect located at the South Channel of the Yangtze estuary was obtained during a spring tide in August 2011.Harmonic analysis was done on the current velocities to get a mean component and a semi-diurnal component.Based on these two components,the driving mechanisms of mean lateral flow and M2 lateral tidal flow are shown and analyzed respectively.The dominant driving force of mean lateral flow is nonlinear advection and that of lateral M2 tidal flow is Coriolis force.The friction plays an important role near the bottom and surface for both lateral mean flow and M2 tidal flow. 相似文献
18.
The hydrodynamics of a small tributary channel and its adjacent mudflat is studied in Willapa Bay, Washington State, USA. Velocity profiles and water levels are simultaneously measured at different locations in the channel and on the mudflat for two weeks. The above tidal flat and channel hydrodynamics differ remarkably during the tidal cycle. When the water surface level is above the tidal flat elevation, the channel is inactive. At this stage, the above tidal flat flow is predominantly aligned along the Bay axis, oscillating with the tide as a standing wave with peak velocities up to 0.3 m/s. When the mudflat becomes emergent, the flow concentrates in the channel. During this stage, current velocities up to 1 m/s are measured during ebb; and up to 0.6 m/s during flood. Standard equations for open-channel flow are utilized to study the channel hydrodynamics. From the continuity equation, a lateral inflow is predicted during ebb, which likely originates from the drainage of the mudflat through the lateral runnels. Both advective acceleration and lateral discharge terms, estimated directly from the velocity profiles, play a significant role in the momentum equation. The computed drag coefficient for bottom friction is small, due to an absence of vegetation and bottom bedforms in the channel. Sediment fluxes are calculated by combining flow and suspended sediment concentration estimated using the acoustic backscatter signal of the instruments. A net export of the sediment from the channel is found during ebb, which is not balanced by the sediment import during flood. When the mudflat is submerged, ebb-flood asymmetries in suspended sediment concentration are present, leading to a net sediment flux toward the inner part of the Willapa Bay. Finally, a residual flow is detected inside the channel at high slack water, probably associated with the thermohaline circulation. 相似文献
19.
Month-long observations of waves and tidal currents at Ponce de Leon Inlet, North Florida are used to investigate the importance of wave-induced bottom drag as a mechanism for overtide generation in estuaries. While bottom drag can in theory lead to overtide generation, in practice, resolving unambiguously this effect is difficult as it tends to be overshadowed by the stronger effect of diurnal–semidiurnal tidal variance. Bottom boundary layer numerical simulations based on observational data suggest that waves can cause the bottom drag experienced by currents to increase by a factor of 1.7, compared with relatively calm conditions. Despite the relatively short duration and limited scope of the experiment, the analysis suggests that overtide modulations (East–West velocity components of the 5th and 6th diurnal constituents) are correlated with wave-enhanced drag trends. Therefore, wave-enhanced bottom drags may be enhancing generation of overtides. Further work is necessary to understand the scope and the strength of this mechanism, in relation to the characteristics (e.g., flow direction) of individual overtides. 相似文献
20.
An idealised three-dimensional numerical model of the Rhine region of fresh water influence (ROFI) was set up to explore the effect of stratification on the vertical structure of the tidal currents. Prandle’s dynamic Ekman layer model, in the case of zero-depth-averaged, cross-shore velocities, was first used to validate the response of the numerical model in the case of barotropic tidal flow. Prandle’s model predicted rectilinear tidal currents with an ellipse veering of up to 2%. The behaviour of the Rhine ROFI in response to both a neap and a spring tide was then investigated. For the given numerical specifications, the Rhine plume region was well mixed over the vertical on spring tide and stratified on neap tide. During spring conditions, rectilinear tidal surface currents were found along the Dutch coast. In contrast, during neap conditions, significant cross-shore currents and tidal straining were observed. Prandle’s model predicted ellipse veering of 50%, and was found to be a good indicator of ellipticity magnitude as a function of bulk vertical eddy viscosity. The modelled tidal ellipses showed that surface currents rotated anti-cyclonically whereas bottom currents rotated cyclonically. This caused a semi-diurnal cross-shore velocity shearing which was 90° out of phase with the alongshore currents. This cross-shore shear subsequently acted on the horizontal density gradient in the plume, thereby causing a semi-diurnal stratification pattern, with maximum stratification around high water. The same behaviour was exhibited in simulations of a complete spring–neap tidal cycle. This showed a pattern of recurring stratification on neaps and de-stratification on springs, in accordance with observations collected from field campaigns in the 1990’s. To understand the increase in ellipticities to 30% during neaps and the precise shape of the vertical ellipse structure, stratification has to be taken into account. Here, a full three-dimensional numerical model was employed, and was found to represent the effect of de-coupling of the upper and lower layers due to a reduction of mixing at the pycnocline. 相似文献