湍致次生环流的数值研究

本文给出了一个数值模式,用于描述具有横向粗糙度变化的平面上方的湍流场内的次生环流。在此模式中,雷诺平均运动方程组的闭合,采用了代数化的雷诺应力输运方程和k-ε二方程湍流模式。计算结果和实验结果相吻合。本文还讨论了利用数值模式进行参数实验的一些结果。     

“门”地貌单元的能量耗散和过程机制

基岩岛屿组成的"门"地貌单元是珠江河口区别于世界其他河口的重要地貌特征之一。文章基于重整化群k-ε湍流模型(RNG k-ε)的FLOW3D流体计算模型研究了"门"地貌单元的时均动力结构及湍流能耗特性。"门"地形致动力结构伴随不同类型能耗区。根据能耗空间分布特性可分为核心区(A1区)、混合区(A2区)、上游区(A3区)、下游区(A4区)。"门"地形作用下,不同分区的动力结构、湍流特性、能量转化、能量耗散特征及其驱动机制不同。     

陆地水体对气候影响的数值研究

本文提出了一个非静力平衡中小尺度数值模式,在模式中包含云的微物理学参数化方案、地面温度和水温预报方案、边界层湍流参数化方案、长波和短波辐射参数化方案,且包含地形。模式具有较好的积分稳定性,能精确地模拟边界层内气候的演变过程。本文用该模式研究了陆地水体对温度、湿度、风和湍流强度的影响,模拟结果与实测资料一致,反映了陆地水体对周围气候环境的影响过程和规律。     

湍流数值模拟中封闭模式应用的局限性

通过对琼州海峡的潮流场特征进行数值模拟，指出了选择不同的特征混合长度表达式对数值模拟结果的影响，表明了基于特征混合长度理论的流封闭模式在近海湍流数值模拟中应用的局限性。     

潮流能水平轴水轮机湍流模型研究初探

借助计算流体力学(CFD)方法研究潮流能水平轴水轮机水动力学性能,选择合适的湍流模型至关重要。为此,本文采用计算流体力学软件Fluent,将Spalart-Allmaras湍流模型、标准k-ε湍流模型、RNGk-ε湍流模型、标准k-ω湍流模型和SSTk-ω湍流模型分别应用到水平轴水轮机数值模拟当中。对数值模拟结果进行分析比较,并与模型试验数据进行对比,得出应用SSTk-ω湍流模型可以更好的模拟潮流能水平轴水轮机的水动力学性能。     

数值化海区框架的建立

数值化海区建立在海区观测资料的基础之上，采用现有的数值计算模式以拓展海区信息，包括海区水深地形数据库、海区潮流数据库、海区波浪数据库、海区泥沙数据库、数值化海区查询库的建立等内容。数值化海区具备一定的分析与计算能力，并具有投资小、速度快和辅助决策的作用。     

垂向湍流扩散系数的不确定性对深层叶绿素最大值现象模拟的影响

深层叶绿素最大值(Deep Chlorophyll Maximum, DCM)现象的数值模拟是研究海洋表层生态系统和全球碳循环的重要组成部分之一。但是由于自身的复杂性和观测的局限性,数值模式中物理参数的不确定性给模拟结果带来了一定程度的误差。其中,垂向湍流扩散系数(vertical turbulence diffusion)是模式所包含的物理参数中很难直接通过观测来确定的参数,它在模式中的来源和取值往往具有很大的不确定性。本文通过条件非线性最优(参数)扰动(Conditional nonlinear optimal perturbation related toparameter, CNOP-P)方法,研究了垂向湍流扩散系数的不确定性对模式模拟结果的影响。我们发现,垂向湍流扩散系数对 DCM 模拟产生最大影响的 CNOP 型扰动位于生产力层的上半部分。并且,去掉生产力层内湍流扩散系数的误差,模式模拟的改进程度最高达到了 80%。可见,垂向湍流扩散对生态系统的发展和保持起着极其重要的作用,改进垂向湍流扩散系数的不确定性,对 DCM 的数值模拟有着重要意义。     

计算波群折射的方法及其应用

根据汪炳祥１９８提出的普遍几何群速概念和波群波向线及其波向线散开因子方程，提出一种计算和绘制波群折射的数值方法。为使本方法较具普遍性，将旋转坐标系引入控制方程并予以变形与简化。数值计算采用Ｒｕｎｇｅ－Ｋｕｔｔａ法。将上述方法应用于胶州湾湾口附近海域的波群折射计算并绘制其折射图。将计算结果分别与依几何群速建立的波群折射和单频率波折射结果比较，可明显地看出基本方法的结果优于后两者。     

深圳湾物理自净能力研究——Ⅰ.潮流和浓度场的模拟

依据环境流体动力学模型和污物输运模型,利用ADI数值计算方法,数值模拟了深圳湾的潮流场和污物浓度场。计算中对边界条件的处理及湍流扩散系数的选取都作了改进,因此计算结果与实测场吻合较好。     

渤海垂直湍流混合强度季节变化的数值模拟

渤海为极浅陆架海 ,其中湍流耗散作用显著。将三维斜压陆架海模式 HAMSOM应用于渤海 ,以渤海周边台站每天 4次的常规气象资料作为风和热驱动 ,渤海海峡开边界以 5个主要分潮调和常数计算水位强迫 ,计算了渤海 1982年水文要素和流场变化 ,并用模式以湍的局地平衡理论封闭计算出垂直湍流粘性的时空分布。结果表明 :渤海湍流混合冬强夏弱 ,变化幅度较大 ( 10～ 2 0 0 cm2 / s) ,这是风搅拌和潮混合的湍流输入在密度层化调整下的结果 ;风的作用在冬季强于潮的作用 ,而底层则由潮混合控制呈现半月周期 ;渤海湍粘性系数的空间分布十分复杂 ,这是在渤海地形和岸形轮廓限制下 ,由一定大气条件驱动的流场和密度场导致的湍流混合强度不同所致     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.     

Estimation of Sediment Properties during Benthic Impact Experiments

Sediment properties, such as water content and density, have been used to estimate the dry and wet weights, as well as the volume of sediment recovered and discharged, during benthic impact experiments conducted in the Pacific and Indian Oceans. The estimates show that the weights of dry (355-1332 t) and wet sediment (1651-4888 t) recovered during the experiments, are not only a function of the total duration and distance covered during the experiment, but also depend on water content and density of the sediment. Estimation of dry sediment and its volumetric ratio in the discharge, are key parameters for calculating the discharged volume. The estimated volume of wet sediment recovered (1427-4049 m 3 ) as well as discharged (2693-6951 m 3 ) during the experiments, provide important inputs to evaluate the sediment resettlement and migration. Using these estimates, the average depth of excavation on the seafloor, can also been calculated. However, the stages of sediment recovery and discharge are expressed differently in some of the experiments. In order to standardize these, different stages have been identified, and definitions of certain terms have been suggested, for use in the future. The methods of calculating different properties, as well as weight and volume of discharged sediment are described in the paper for use in other applications concerning deep-sea discharges.     

A Tidal Flow Model for the Gulf of Kachchh, India

A vertically integrated model has been used to study the tidal circulation and currents in the Gulf of Kachchh along the west coast of India. The model is fully nonlinear and uses a semiexplicit finite difference scheme to solve the basic hydrodynamic equations on a staggered grid. The model is forced by prescribing the tides along the open boundary of the model domain. The flow is simulated both with and without the presence of the proposed tidal barrage across the Hansthal Creek in the Gulf of Kachchh. The results show a considerable change in the behavior of the tidal flow in the presence of the barrage.     

利用中国GF-3卫星SAR和HY-2A卫星微波散射计的首次台风联合定量观测

<正>The typhoon,as a mature tropical cyclone that develops in the western part of the North Pacific Ocean with high wind speed and heavy rainfall,is one of the most lethal and costly of natural disasters for the densely populated countries of East Asia.It can be easily detected by space-borne sensors operated at microwave,visible or infrared bands(Liu et al.,2014).Synthetic Aperture Radar(SAR)is     

Increased Particle Fluxes at the INDEX Site Attributable to Simulated Benthic Disturbance

Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.     

A Review of Some Environmental Issues Affecting Marine Mining

This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.     

离子交换—原子吸收光谱法测定海水中痕量铜、铅、锌、镉、铁、锰

本文介绍了用国产D401型螯合树脂分离富集海水中铜、铅、锌、镉、铁、锰等痕量元素,并用原子吸收光谱仪测定其含量的方法。讨论了各元素的分离条件选择及干扰元素的影响,并与溶剂萃取法的结果作了比较。各元素检测的定量下限为:铜0.5μg/L、铅0.1μg/L、锌1.0μg/L、镉0.01μg/L、铁2.0μg/L、锰2.0μg/L。方法精密度在4—8％之间,回收率为90—102％。