Accumulation of heavy metals in Oostriku peat bog,Estonia: -site description,conceptual modelling and geochemical modelling of the source of the metals

Oxidation of sulphides leads to the dissolution of metals, which are transported with water and accumulate at geochemical barriers. Such barriers can form in peat bogs. This paper gives an introduction into the long-term processes in Oostriku peat bog where high accumulations of heavy metals are observed. Peat and water samples are analysed for Fe, As and heavy metals (Cd, Cu, Mn, Ni, Pb and Zn) using different methods. A concept is based on the observations. Metals are leached by sulphide oxidation in the carbonate rocks upstream of the peat. The water feeds the peat from below. The metals are sorbed and precipitated in the peat. The sulphide oxidation is simulated to examine the origin and metal speciation in the water. The simulated solution is compared with the groundwater entering the peat. The results showed a fair agreement for the major constituents. There were considerable differences for species with low concentrations.     

Geochemical fractionation of Ni,Cu and Pb in the deep sea sediments from the Central Indian Ocean Basin: An insight into the mechanism of metal enrichment in sediment

Metal speciation study in combination with major element chemistry of deep sea sediments provided possible metal enrichment pathways in sediments collected from environmentally different locations of Central Indian Ocean Basin (CIB). Metal speciation study suggests that Fe–Mn oxyhydroxide phase was the major binding phase for Ni, Cu and Pb in the sediments. The second highest concentrations of all these metals were present within the structure of the sediments. Easily reducible oxide phase (within the Fe–Mn oxyhydroxide binding phases) was the major host for all the three metals in the studied sediments. Major element chemistry of these sediments revealed that there was an increased tendency of Cu and Ni to get incorporated into the deep sea sediment via the non-terrigenous Mn-oxyhydroxide fraction, whereas, Pb gets incorporated mostly via amorphous Fe-hydroxides into the sediment from the CIB. This is the first attempt to provide an insight into the mechanism of metal enrichment in sediment that host vast manganese nodule.     

Interactions between Cd,Cu, Pb,and Zn and four different mine soils

The chemical associations of Cd, Cu, Pb, and Zn in four mine soil samples from the Amizour-Bejaia Pb/Zn mine (Algeria) have been investigated by a five-step sequential extraction procedure. Although Cd preferentially binds to carbonates, Cu, Pb, and Zn are mainly associated with the organic and reducible fractions. Batch adsorption experiments with either mono- or multi-metallic solutions are described with the Freundlich isotherm model. Whatever the nature of the soil sample, the sorption behavior for each given metal except Pb is very similar, indicating that the binding sites at the soil surface are progressively occupied by the metal from the solution. On each soil sample, the decreasing order of sorption can be established as Pb >> Cu > Cd > Zn. When the four metals are simultaneously applied to each soil sample, their specific behavior is strongly affected by their interactions and/or competition for the available surface sites: we generally observed isotherm curves with a slight maximum before the plateau at higher solution concentration. Although Cu is only slightly affected by the other metals, in the case of Pb, Cd, and Zn, the sorbed amounts strongly decreased.     

Sorption of Cu and Pb to kaolinite-fulvic acid colloids: Assessment of sorbent interactions

The sorption of Cu(II) and Pb(II) to kaolinite-fulvic acid colloids was investigated by potentiometric titrations. To assess the possible interactions between kaolinite and fulvic acid during metal sorption, experimental sorption isotherms were compared with predictions based on a linear additivity model (LAM). Suspensions of 5 g L⁻¹ kaolinite and 0.03 g L⁻¹ fulvic acid in 0.01 M NaNO₃ were titrated with Cu and Pb solutions, respectively. The suspension pH was kept constant at pH 4, 6, or 8. The free ion activities of Cu²⁺ and Pb²⁺ were monitored in the titration vessel using ion selective electrodes. Total dissolved concentrations of metals (by ICP-MS) and fulvic acid (by UV-absorption) were determined in samples taken after each titration step. The amounts of metals sorbed to the solid phase, comprised of kaolinite plus surface-bound fulvic acid, were calculated by difference. Compared to pure kaolinite, addition of fulvic acid to the clay strongly increased metal sorption to the solid phase. This effect was more pronounced at pH 4 and 6 than at pH 8, because more fulvic acid was sorbed to the kaolinite surface under acidic conditions. Addition of Pb enhanced the sorption of fulvic acid onto kaolinite at pH 6 and 8, but not at pH 4. Addition of Cu had no effect on the sorption of fulvic acid onto kaolinite. In the LAM, metal sorption to the kaolinite surface was predicted by a two-site, 1-pK basic Stern model and metal sorption to the fulvic acid was calculated with the NICA-Donnan model, respectively. The LAM provided good predictions of Cu sorption to the kaolinite-fulvic acid colloids over the entire range in pH and free Cu²⁺ ion activity (10⁻¹² to 10⁻⁵). The sorption of Pb was slightly underestimated by the LAM under most conditions. A fractionation of the fulvic acid during sorption to kaolinite was observed, but this could not explain the observed deviations of the LAM predictions from the experimental Pb sorption isotherms.     

Distribution and immobilization of heavy metals in Pliocene aquifer sediments in Wadi El Natrun depression, Western Desert

The Pliocene aquifer receives inflow of Miocene and Pleistocene aquifer waters in Wadi El Natrun depression. The aquifer also receives inflow from the agricultural activity and septic tanks. Nine sediment samples were collected from the Pliocene aquifer in Wadi E1 Natrun. Heavy metal (Cu, Sr, Zn, Mn, Fe, Al, Ba, Cr, Ni, V, Cd, Co, Mo, and Pb) concentrations of Pliocene aquifer sediments were investigated in bulk, sand, and mud fractions. The determination of extractable trace metals (Cu, Zn, Fe, Mn, and Pb) in Pliocene aquifer sediments using sequential extraction procedure (four steps) has been performed in order to study environmental pathways (e.g., mobility of metals, bounding states). These employ a series of successively stronger chemical leaching reagents which nominally target the different compositional fractions. By analyzing the liquid leachates and the residual solid components, it is possible to determine not only the type and concentration of metals retained in each phase but also their potential ecological significance. Cu, Sr, Zn, Mn, Fe, and Al concentrations are higher in finer sediments than in coarser sediments, while Ba, Cr, Ni, V, Cd, Co, Mo, and Pb are enriched in the coarser fraction. The differences in relative concentrations are attributed to intense anthropogenic inputs from different sources. Heavy metal concentrations are higher than global average concentrations in sandstone, USEPA guidelines, and other local and international aquifer sediments. The order of trace elements in the bulk Pliocene aquifer sediments, from high to low concentrations, is Fe?>?Al?>?Mn?>?Cr?>?Zn?>?Cu?>?Ni?>?V?>?Sr?>?Ba?>?Pb?>?Mo?>?Cd?>?Co. The Pliocene aquifer sediments are highly contaminated for most toxic metals, except Pb and Co which have moderate contamination. The active soluble (F0) and exchangeable (F1) phases are represented by high concentrations of Cu, Zn, Fe, and Mn and relatively higher concentrations of Pb and Cd. This may be due to the increase of silt and clay fractions (mud) in sediments, which act as an adsorbent, retaining metals through ion exchange and other processes. The order of mobility of heavy metals in this phase is found to be Pb?>?Cd?>?Zn?>?Cu?>?Fe?>?Mn. The values of the active phase of most heavy metals are relatively high, indicating that Pliocene sediments are potentially a major sink for heavy metals characterized by high mobility and bioavailability. Fe–Mn oxyhydroxide phase is the most important fraction among labile fractions and represents 22% for Cd, 20% for Fe, 11% for Zn, 8% for Cu, 5% for Pb, and 3% for Mn. The organic matter-bound fraction contains 80% of Mn, 72% of Cu, 68% of Zn, 60% of Fe, 35% of Pb, and 30% of Cd (as mean). Summarizing the sequential extraction, a very good immobilization of the heavy metals by the organic matter-bound fraction is followed by the carbonate-exchangeable-bound fraction. The mobility of the Cd metal in the active and Fe–Mn oxyhydroxide phases is the highest, while the Mn metal had the lowest mobility.     

Speciation and Mobility of Selected Trace Metals (As, Cu, Mn, Pb and Zn) in Sediment with Depth in Cam River-Mouth, Haiphong, Vietnam

The speciation and mobility of some selected trace metals (As, Cu, Mn, Pb and Zn) in sediments with depth was investigated in the Cam River-mouth (Vietnam) by collecting sediment cores and analysing porewater and sediment composition, complemented with single (ammonium-EDTA) and sequential (BCR 3-step) extractions and mineralogical analysis (XRD). All trace metals show overall decreasing trends with depth in porewater as a result of anthropogenic input in upper sediment layers. High porewater concentrations of As, Mn and Pb in oxic and suboxic sediment layers may result in groundwater pollution. Sediment-bound Pb and Mn dominate in the reducible and the acid-soluble fraction, respectively, while Cu and Zn distribute rather evenly between four extracted fractions. The porewater metal speciation, as predicted by a geochemical model Visual MINTEQ version 3.0, indicates that the toxicity of Cu, Mn, Pb and Zn (presented by the proportions of free metal ions) decreases with depth, while the toxicity of As increases when As(III) becomes more abundant. The dissolved concentrations of trace metals are not only controlled by the precipitation/dissolution of discrete hydroxide/oxide, carbonate and phosphate minerals, but also by sorption processes on major sorbents (i.e. As on goethite, and Mn and Zn on calcite and dolomite). Sulphide minerals do not show any control even in the anoxic zone most likely because of the low concentration of sulphur.     

Seasonal variations of Zn, Cu, As and Mo in arsenic-rich stream at the Mokrsko gold deposit, Czech Republic

Monthly sampling of slightly alkaline arsenic-rich stream in the Mokrsko gold deposit revealed seasonal variations in dissolved Zn, Cu, As and Mo. Concentrations of trace metal cations (Zn, Cu) increased as much as 330 and 178%, respectively, from minimum mean values at autumn to maximum mean values at spring. In contrast, concentrations of trace element oxyanions (As, Mo) revealed opposite seasonal pattern with increase to 189% (As) and 123% (Mo) during summer–autumn, indicating that in-stream biogeochemical process(es) played the main role in controlling the seasonal variations of these trace elements. The trace elements were mainly scavenged by low crystalline Mn oxyhydroxide and Fe oxyhydroxide (ferrihydrite). Results are consistent with sorption and coprecipitation processes controlling seasonal variations of dissolved Zn and Cu, while As and Mo dynamics appear linked to Mn redox reactions. The sorption processes and Mn redox processes are attributed to the changes of pH and oxic/anoxic conditions on the surface of oxyhydroxides, respectively, which are themselves controlled by the balance between photosynthesis and respiration. Under the geochemical conditions of the stream, inferred Mn redox reactions can only be explained by microbial activity.     

On the metal content and metal ion uptake of botanically specific peats and the derived humic acids

With respect to ten metals (Al, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga) which are continguous in the Periodic Table the natural metal content and the ability to take up metal ions has been determined for three peats of defined botanical origin, each peat being sampled at three different levels. A correlation is found between the natural metal content and botanical origin. Apart from aluminium, the concentration of individual metals increased in the series Sphagnum < fen sedge < reed, the increase being statistically significant (P = 0.001) for V, Mn, Co, Ni, and Ga and for the sum of the metal ions measured.No clear correlation emerged between botanical origin and metal uptake. The metal uptake by the humic acid derived from each peat sample was also determined, and correlated with the metal uptake of the source peat itself.In all the humic acid and peat metal-uptake experiments the selectivities were very similar. V, Cr, Cu, Ga were readily taken up while Mn, Co and Zn were consistently less preferred.     

Trace element concentrations of soils, plants and waters caused by a copper smelting plant and other industries, Northeast Turkey

The study area is situated in a large agricultural field which produces tobacco, maize, and other yearly cultivated vegetables in Tekkeköy, Samsun (NE-Turkey). In addition, a significant part of this area to the north along the Black Sea coast is occupied by several industrial plants such as a copper smelting plant (KB?), a fertilizer plant (Tügsa?) and industrial park facilities (IPF). In order to reveal their environmental impacts, heavy metal analyses were conducted on soil, plant leaves and water samples collected within an area of approximately 30 km² around these plants. Soil samples within an area of 10 km² around these facilities are found to be highly polluted with Cu, Zn, Pb, Fe and Mn. Pollution occurs at surface and sharply dies out at 20 cm downwards in soil profile. Since the region is polluted mostly with base metals, the copper smelting factory appears to be the main source of pollution as it processes the massive sulfidic ores of the Black Sea area. Plants show Cu, Pb, Zn and Fe pollution around KB? and Tügsa? and Cu and Pb around IPF. Pollutants observed in tobacco (Nicotiana tobacum) are Cu, Pb, Zn, Fe and S; in maize (Zea mays) Cu, Zn and Fe; and in cabbage (Brassica oleracea) Cu, Pb, Fe and S. The analyses of water samples collected from the study area reveal that Pb and, to a lesser degree, Cu and Fe pollution stem from KB?; Cu, Fe and Mn pollution from Tügsa?; Pb and minor amounts of Fe and Mn pollution from IPF. Factor analyses from analyzed metals and anionic complexes in water show three distinct groups: (a) an association of heavy metals with Na, K and Mg referring to pollution and acid leaching of soil, (b) an association of NH4, Fe, SO₄, Cl and Br indicating agricultural pollution and sea-water invasion in land near the shore line, and (c) HCO₃ behaving in a different manner in heavy metal precipitation.     

Sorption of metals on humic acid

The sorption on humic acid (HA) of metals from an aqueous solution containing Hg(II). Fe(III), Pb, Cu, Al, Ni, Cr(III), Cd, Zn, Co and Mn, was investigated with special emphasis on effects of pH, metal concentration and HA concentration. The sorption efficiency tended to increase with rise in pH, decrease in metal concentration and increase in HA concentration of the equilibrating solution. At pH 2.4. the order of sorption was: Hg? Fe? Pb? CuAl ? Ni ? CrZnCdCoMn. At pH 3.7. the order was: Hg and Fe were always most readily removed, while Co and Mn were sorbed least readily. There were indications of competition for active sites (CO₂H and phenolic OH groups) on the HA between the different metals. We were unable to find correlations between the affinities of the eleven metals to sorb on HA and their atomic weights, atomic numbers, valencies, and crystal and hydrated ionic radii. The sorption of the eleven metals on the HA could be described by the equation $\text{Y =}\text{100}\text{[1 + exp ? (A + BX)]}$, where Y = % metal removed by HA; X = mgHA; and A and B are empirical constants.     

Metals in Okefenokee peat-forming environments: relation to constituents found in coal

Ba, Ca, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, Pb and Zn were studied in cores of peat from two major vegetational areas of the Okefenokee Swamp, Georgia; both total peat and organic fractions were investigated. Except for Hg and Pb, metal concentrations were either higher or equal to Clarke values. The sandy bedrock is not an important contributor to metal concentrations found in peat. Levels of metals in a given peat sample were related to plant materials which gave rise to the peat; it does not appear that vegetational environment plays a critical role in determining trace metal distribution, but does play a role in determining the amount of humic or pre-vitrinitic constituents that eventually are found in coal.     

Absorption of metals on sedimentary and peat humic acids

Humic acids isolated from marine sediments were found to be effective in absorption of various metal ions through chelation, cation exchange and surface adsorption. The quantities of metal ions complexed varied from 40 to 205 mg/g of organic matter. In the presence of equal concentrations of Co, Cu, Mn, Ni and Zn in the reaction media, humic acid and peatmoss, a rich source of humic compounds, showed preferential absorption for Cu. Copper constituted more than 50% of the metal ions complexed by organic matter. As compared with the other metal ions, its bonding strength was very firm because it could not be displaced by ferric ion or cation exchange reagents.Peatmoss, a rich source of humic acid, was found to absorb significant quantities of various metal ions. Under laboratory conditions each kg of peat absorbed about 1500 mg of various metal ions from solutions containing equal concentrations of Co, Cu, Mn, Ni and Zn. However, in the field trials with sea water, absorption of metals was limited to Zn (28.7 mg/kg), Cu (3.66 mg/kg) and Fe (2.0 mg/kg). Under-saturation of sea water for transition metals and super-saturation for alkali and alkaline earth metals appears to be a bottleneck in the effective utilization of peat as a means of recovery of metals from sea water.     

Distribution of heavy metals in the clastic fine-grained sediments of Gavkhuni playa lake (Southeast of Isfahan,Iran)

The sedimentary basin of Gavkhuni playa lake includes two sedimentary environments of delta and playa lake. These environments consist of mud, sand and salt flats. There are potentials for concentration of heavy metals in the fine-grained sediments (silt and clay) of the playa due to existence of Pb/Zn ore deposits, industrial and agricultural regions in the water catchment of Zayandehrud River terminating to this area. In order to study the concentration of heavy metals and the controlling factors on their distribution in the fine-grained sediments, 13 samples were taken from the muddy facies and concentration of the heavy metals were determined. The results showed that the heavy metal concentrations range in the sediments (in ppm) are Mn (395.5–1,040), Sr (100.4–725.76), Pb (14.66–91.06), Zn (23.59–80.9), Ni (37–73.66), Cu (13.83–29.83), Co (5.73–13.78), Ag (3.03–4.76) and Cd (2.3–5.5) in their order of abundances. The concentration of Ag is noticeable in the sediments relative to the average concentration of this element in mud sediments. The amounts of Pb and Zn are relatively high in all the samples in comparison with the other elements. The concentration of Ni is relatively high in the oxidized samples. The distribution of Pb is directly related to organic matter content of the sediments. The concentrations of Zn, Sr, Cu, Co and Cd in the samples of the playa are lower than those in the delta. The amount of illite is another factor influencing Zn and Pb concentrations. Sr is more concentrated in the sediments with the high content of calcium carbonate. The distribution pattern of Cu, Co, Pb and Mn resembles to that of the clay content of the sediments. The clay content shows positive correlations with Co, Cu and Mn concentrations and negative correlation with Ag. The Sr and Ag concentrations are positively correlated with the amount of CaCO₃. The amounts of Co, Cu, Ni and Mn show negative correlations with the calcium carbonate content. Pb and Co are noticeably correlated with Mn.     

Partitioning of heavy metals in surface Black Sea sediments

Bulk heavy metal (Fe, Mn, Co, Cr, Ni, Cu, Zn and Pb) distributions and their chemical partitioning, together with TOC and carbonate data, were studied in oxic to anoxic surface sediments (0–2 cm) obtained at 18 stations throughout the Black Sea. TOC and carbonate contents, and available hydrographic data, indicate biogenic organic matter produced in shallower waters is transported and buried in the deeper waters of the Black Sea. Bulk metal concentrations measured in the sediments can be related to their geochemical cycles and the geology of the surrounding Black Sea region. Somewhat high Cr and Ni contents in the sediments are interpreted to reflect, in part, the weathering of basic-ultrabasic rocks on the Turkish mainland. Maximum carbonate-free levels of Mn (4347 ppm), Ni (355 ppm) and Co (64 ppm) obtained for sediment from the shallow-water station (102 m) probably result from redox cycling at the socalled ‘Mn pump zone’ where scavenging-precipitation processes of Mn prevail. Chemical partitioning of the heavy metals revealed that Cu, Cr and Fe seem to be significantly bound to the detrital phases whereas carbonate phases tend to hold considerable amounts of Mn and Pb. The sequential extraction procedures used in this study also show that the metals Fe, Co, Ni, Cu, Zn and Pb associated with the ‘oxidizable phases’ are in far greater concentrations than the occurrences of these metals with detrital and carbonate phases. These results are in good agreement with the recent studies on suspended matter and thermodynamic calculations which have revealed that organic compounds and sulfides are the major metal carriers in the anoxic Black Sea basin, whereas Fe-Mn oxyhydroxides can also be important phases of other metals, especially at oxic sites. This study shows that, if used with a suitable combination of the various sequential extraction techniques, metal partitioning can provide important information on the varying geological sources and modes of occurrence and distribution of heavy metals in sediments, as well as, on the physical and chemical conditions prevailing in an anoxic marine environment.     

Assessment of trace metal contents in water and bottom sediments from Eğirdir Lake,Turkey

The concentration of metals (Pb, As, Co, Cu, Ni, Zn, Fe and Mn) was investigated in water and sediment samples of E?irdir Lake. The Lake is the second largest fresh water lake of Turkey and it is used as drinking water in the region. The anthropogenic pollutants are primary sources of trace metals which are negatively affected lake water quality. These negative effects were observed in both lake water and bottom sediments. According to obtained data, Pb, Cu, Ni, Fe and Zn have significant enrichment in sediments samples. In addition, the hydrodynamic model of the lake was determined as effectively for Pb, Co, Cu, Ni, Zn, Fe and Mn accumulations. Also, the effect of anthropogenic pollutants was found to be more dominant than geogenic effect in metal accumulation of the lake bottom sediments. Therefore, anthropogenic pollutants within the lake basin should be consistently controlled for the sustainable usage of the lake.     

The concentration of Cu(II), Pb(II) and Zn(II) from aqueous solutions by particulate algal matter

Experimental studies of the reactions of Cu(II), Pb(II), and Zn(II) in aqueous solutions with organic matter derived from fresh samples of the green filamentous algae Ulothrix spp. and the green unicellular algae Chlamydomonas spp. and Chlorella vulgaris show that, under suitable conditions, a significant proportion of the metals is removed from solution by sorption onto the particulate organic matter of the algal suspension.The metal sorption is strongly suppressed by H⁺ but is only marginally influenced by the proportion of whole cells in the suspension and by complexing of metals in solution by the soluble organic matter. The presence of relatively small amounts of the cations Na⁺ and Mg²⁺ in solution reduces the sorption of Zn(II) to near zero, but Pb(II) and Cu(II) sorption occurs to an appreciable extent even in strong brines. This may be a means for the selective precipitation of Pb(II) from brines rich in Pb(II) and Zn(II).Metal “saturation” values indicate that particulate algal matter of the type used in these experiments could sorb sufficient quantities of metal to form an ore deposit if a weight of organic matter of similar order of magnitude to that of the inorganic sediments in the deposits was available. However, the metal sorption is an equilibrium reaction, and the experimentally determined “enrichment factors” suggest that the “saturation” values could be approached only in solutions whose metal contents were initially at least two orders of magnitude above those of normal seawater.     

Removal of trace metals by coprecipitation with Fe,Al and Mn from natural waters contaminated with acid mine drainage in the Ducktown Mining District,Tennessee

This study examined the sorption of trace metals to precipitates formed by neutralization of 3 natural waters contaminated with acid mine drainage (AMD) in the former Ducktown Mining District, Tennessee. The 3 water samples were strongly acidic (pH 2.2 to 3.4) but had distinctively different chemical signatures based on the mole fractions of dissolved Fe, Al and Mn. One sample was Fe-rich (Fe=87.5%, Al=11.3%, and Mn=1.3%), another was Al-rich (Al=79.4%, Mn=18.0%, and Fe=2.5%), and the other was Mn-rich (Mn=51.4%, Al=25.7%, and Fe=22.9%). In addition, these waters had high concentrations of trace metals including Zn (37,700 to 17,400 μg/l), Cu (13,000 to 270 μg/l), Co (1,500 to 520 μg/l), Ni (360 to 75 μg/l), Pb (30 to 8 μg/l), and Cd (30 to 6 μg/l). Neutralization of the AMD-contaminated waters in the laboratory caused the formation of either schwertmannite at pH<4 or ferrihydrite at pH>4. Both phases were identified by XRD analyses of precipitates from the most Fe-rich water. At higher pH values (∼5) Al-rich precipitates were formed. Manganese compounds were precipitated at pH∼8. The removal of trace metals depended on the precipitation of these compounds, which acted as sorbents. Accordingly, the pH for 50% sorption (pH₅₀) ranged from 5.6 to 7.5 for Zn, 4.6 to 6.1 for Cu, 5.4 to 7.7 for Ni, 5.9 to 7.9 for Co, 3.1 to 4.3 for Pb, and 5.5 to 7.7 for Cd. The pH dependence of sorption arose not only because of changes in the sorption coefficients of the trace metals but also because the formation and composition of the sorbent was controlled by the pH, the chemical composition of the water, and the solubilities of the oxyhydroxide-sulfate complexes of Fe, Al, and Mn.     

Distribution of radioactive Cs and trace elements in the lichen-substrate system and in the lichen body

The distribution of radioactive Cs and heavy metals (V, Cr, Mn, Co, Ni, Cu, Zn, Cd, Hg, and Pb) in the lichen-substrate system and in lichen tissues were examined using the example of Cladonia genera. The upper podetia-lower podetia-dead podetia-base-substrate system was sampled at 32 sites in Novosibirsk oblast and Altai administrative territory, 16 of which were selected for detailed studying of the trace element distribution in the upper and lower podetia using cold press and the modified Dexter technique. One in vivo and two in vitro experiments simulated the influence of metal-rich atmospheric fallouts on the lichen carpet. The lichen carpet was irrigated by solution of metal nitrates (Co, Cu, Zn, Cd, Hg, and Pb) in the former case and loaded in these solution during the latter experiment. The experiment performed in the laboratory conditions (in vitro) was aimed at studying the dynamics of metal accumulation in lichen constituents and their subsequent extraction with distilled water to monitor metal sorption on the podetium cell walls. The metal contents and the activity of radioactive Cs in the lichen samples, including lichen cell sap, as well as in the base and substrate, were determined by atomic-absorption and gamma spectroscopic methods. In terms of accumulation, the elements are subdivided into two groups. The lowest contents of Group-1 elements (¹³⁷ Cs, Zn, Cd, Hg, and Pb) were found in the substrate, and the highest contents, detected at the base and dead podetium, are presumably of technogenic origin. The Group-2 elements (Cr, Mn, Co, Ni, and Cu) enrich the substrate. It was established that the elements are mainly accumulated in lichens in cell walls and the membrane. The lichen sap and water-soluble compounds of protoplasma contain less than 0.1% of the total element content in the tissue. Most Zn, Cd, Co, and Pb ions (about 80% of the total absorbed amount) migrated from experimental solution into lichen cells during the first 12 h.     

固体聚合膜电解浓集法测量天然水中低含量氚的化学淬灭效应研究

固体聚合膜电解浓集法是浓缩氚含量较低(1 Bq/m~3)的天然水样的常用方法,但因水样自身含有杂质离子或电解装置聚合膜带入杂质进入浓集液,使浓集液偏酸性,在测量过程中易产生化学淬灭效应,导致氚的测量值偏低。本文研究了水样自身存在的杂质离子和聚合膜上残留的杂质离子、样品溶液的pH值及其电导率所产生的化学淬灭效应的影响,实验表明,为减少化学淬灭效应,提高测量低含量氚的准确性,需保证水样溶液呈中性,电导率≤1μS/cm,同时避免杂质沉积在聚合膜上。如果水样溶液的pH值偏酸性、电导率大于1μS/cm,可采用酸碱混合型离子交换树脂去除水样中自身的杂质;对于聚合膜引入的杂质,可在电解后的水样中加入微量氨水将其pH值调节至中性。