Ar/Ar thermochronology of the Kampa Dome, southern Tibet: Implications for tectonic evolution of the North Himalayan gneiss domes

Structural and thermochronological studies of the Kampa Dome provide constraints on timing and mechanisms of gneiss dome formation in southern Tibet. The core of Kampa Dome contains the Kampa Granite, a Cambrian orthogneiss that was deformed under high temperature (sub-solidus) conditions during Himalayan orogenesis. The Kampa Granite is intruded by syn-tectonic leucogranite dikes and sills of probable Oligocene to Miocene age. Overlying Paleozoic to Mesozoic metasedimentary rocks decrease in peak metamorphic grade from kyanite + staurolite grade at the base of the sequence to unmetamorphosed at the top. The Kampa Shear Zone traverses the Kampa Granite — metasediment contact and contains evidence for high-temperature to low-temperature ductile deformation and brittle faulting. The shear zone is interpreted to represent an exhumed portion of the South Tibetan Detachment System. Biotite and muscovite ⁴⁰Ar/³⁹Ar thermochronology from the metasedimentary sequence yields disturbed spectra with 14.22 ± 0.18 to 15.54 ± 0.39 Ma cooling ages and concordant spectra with 14.64 ± 0.15 to 14.68 ± 0.07 Ma cooling ages. Petrographic investigations suggest disturbed samples are associated with excess argon, intracrystalline deformation, mineral and fluid inclusions and/or chloritization that led to variations in argon systematics. We conclude that the entire metasedimentary sequence cooled rapidly through mica closure temperatures at  14.6 Ma. The Kampa Granite yields the youngest biotite ⁴⁰Ar/³⁹Ar ages of  13.7 Ma immediately below the granite–metasediment contact. We suggest that this age variation reflects either varying mica closure temperatures, re-heating of the Kampa Granite biotites above closure temperatures between 14.6 Ma and 13.7 Ma, or juxtaposition of rocks with different thermal histories. Our data do not corroborate the “inverse” mica cooling gradient observed in adjacent North Himalayan gneiss domes. Instead, we infer that mica cooling occurred in response to exhumation and conduction related to top-to-north normal faulting in the overlying sequence, top-to-south thrusting at depth, and coeval surface denudation.     

U–Pb SHRIMP zircon geochronology and T–t–d history of the Kampa Dome, southern Tibet

Structural, petrographic and geochronologic studies of the Kampa Dome provide insights into the tectonothermal evolution of orogenic crust exposed in the North Himalayan gneiss domes of southern Tibet. U–Pb ion microprobe dating of zircons from granite gneiss exposed at the deepest levels within the dome yields concordia ²⁰⁶Pb/²³⁸U age populations of 506 ± 3 Ma and 527 ± 6 Ma, with no evidence of new zircon growth during Himalayan orogenesis. However, the granite contains penetrative deformation fabrics that are also preserved in the overlying Paleozoic strata, implying that the Kampa granite is a Cambrian pluton that was strongly deformed and metamorphosed during Himalayan orogenesis. Zircons from deformed leucogranite sills that cross-cut Paleozoic metasedimentary rocks yield concordant Cambrian ages from oscillatory zoned cores and discordant ages ranging from ca. 491–32 Ma in metamict grains. Since these leucogranites clearly post-date the metasedimentary rocks they intrude, the zircons are interpreted as xenocrysts that are probably derived from the Kampa granite. The Kampa Dome formed via a series of progressive orogenic events including regional ~ N–S contraction and related crustal thickening (D₁), predominately top-to-N ductile shearing and crustal extension (D₂), top-to-N brittle–ductile faulting and related folding on the north limb of the dome, localized top-to-S faulting on the southern limb of the dome, and crustal doming (D₃), and continued N–S contraction, E–W extension and doming (D₄). Structural and geochronologic variability amongst adjacent North Himalayan gneiss domes may reflect changes in the magnitude of crustal exhumation along the North Himalayan antiform, possibly relating to differences in the mid-crustal geometry of the exhuming fault systems.     

Late Cenozoic rotations of the Juan de Fuca Ridge and the Gorda Rise: A case study

In response to at least one change in the direction of sea-floor spreading, the Juan de Fuca Ridge and Gorda Rise have rotated approximately 20° clockwise with respect to geographic North during the last 10 million years. The rotation histories of these ridge segments have been determined from the ages and azimuths of linear magnetic anomalies within the corresponding “zed” patterns. In each case the rotations were systematic and occurred between about 9 and 3 Ma B.P. Significantly, the rotations occurred in a number of discrete stages during each of which the rates of rotation were approximately constant; rotation rates range from 1.3 to 8.6°/Ma.Though the rotation histories of these spreading centers are generally similar, some changes in the rotation rates are not synchronous, and until 3 Ma B.P., the Juan de Fuca Ridge had a 5–10° more easterly trend than the Gorda Rise. For the last 3 million years both ridge segments have had stable trends near 19°E of North.On a time scale of millions of years, ridge reorientation may be regarded as a continuous process wherein the rotation of the spreading center results from asymmetric spreading. Discontinuous changes in the degree of asymmetric spreading are required to account for observed changes in rotation rate. If the orthogonal arrangement of spreading centers and transform faults represents a least-work condition in which the resistance to plate motions is minimized by minimizing the lengths of ridge segments, as suggested previously, and if the rate at which the system seeks to reduce the total resistance after a change in spreading direction is maximum, it follows that the degree of asymmetric spreading, and hence the rate of rotation, are inversely proportional to the resistance to motion on transform faults. Thus, the various stages of rotation of the Juan de Fuca Ridge and Gorda Rise probably reflect different stress conditions on the Blanco Fracture Zone.It is difficult to account for the different trends of the Juan de Fuca Ridge and Gorda Rise largely because the Gorda Block is not behaving as a rigid plate and because the Mendocino Fracture Zone is not a transform fault. However, the fact that the Gorda Rise has had a stable trend for 3 million years, in spite of the deformation of an adjacent plate, suggests that the motion of the Gorda Block is not controlled by the motions of the vast Pacific and North American Plates, and that the Driving mechanism is “felt” directly at the ridge.     

Westward accretion of the Baltic Shield: implications from the 1.6 GaÅmål-Horred Belt, SW Sweden

Three new U-Pb zircon age determinations are reported from the Horred region, south-southeast of Göteborg, SW Sweden. This is a region of the Southwest Scandinavian Domain, within which a major NS trending shear zone and tectonic boundary, the Mylonite Zone, juxtaposes comparatively weakly migmatised lithologies in the west against more intensely migmatised gneisses in the east.West of the Mylonite Zone, a metavolcanic rock (the Mjösjödacite) yields an age of 1643 ± 29 Ma, whereas a cross-cutting plutonic rock (the Idala tonalite) has an age of 1584 ± 15 Ma. Together with a recent age for a volcanic rock from theÅmål region farther north (1.61 Ga, Lundqvist and Skiöld, 1992), these ages help to establish the existence of a coherent calc-alkaline igneous belt of 1.6 Ga age for which the nameÅmål-Horred Belt is proposed.East of the Mylonite Zone, a presumably metavolcanic rock (the Grimmared gneiss) yields an age of 1.61 Ga. The obtained age and the compositional similarity of rocks on each side of the Mylonite Zone indicate that more deformed and more strongly metamorphosed equivalents of the rocks in theÅmål-Horred Belt may occur also to the east of the Mylonite Zone in what is termed the Eastern Segment of the Southwest Scandinavian Domain.The new results establish theÅmål-Horred Belt as a major geological unit younger than most other crustal components in southern Sweden such as theÖstfold-Marstrand Belt ( 1.76 Ga), the Eastern Segment gneisses (> 1.66 Ga) and the three age groups of the Transscandinavian Igneous Belt ( 1.81 – 1.65 Ga; Larson and Berglund, 1992). The configuration of the crustal units in SW Sweden appears to necessitate more complex Proterozoic models than those with a persistent younging from the present east to the west.The present concept of the “Gothian orogeny” must be revised since at least two different orogenic episodes at 1.7 and 1.6 Ga can now be distinguished.     

Temporal relationship between granite cooling and hydrothermal uranium mineralization at Dalongshan in China: a combined radiometric and oxygen isotopic study

A combined study using multi-radiometric dating and oxygen isotopic geothermometry was carried out for Mesozoic quartz syenite, alkali-feldspar granite and associated hydrothermal uranium mineralization at Dalongshan in the Middle-Lower Yangtze valley of east-central China. Radiometric dating of the quartz syenite yields a whole-rock Rb–Sr isochron age of 135.6±4.3 Ma, a zircon U–Pb isochron age of 132.9±2.2 Ma, and K–Ar ages of 126±2, 118±3 and 94±4 Ma for hornblende, biotite and orthoclase, respectively. The alkali-feldspar granite yields a whole-rock Rb–Sr isochron age of 117.3±3.3 Ma, a zircon U–Pb isochron age of 114.7±2.1 Ma, and K–Ar ages of 112±2, 109±3 and 88±4 Ma for hornblende, biotite and orthoclase, respectively. Oxygen isotope thermometry for both granites gives temperatures of 685 to 720, 555 to 580, 435 to 460 and 320 to 330 °C, for hornblende, magnetite, biotite and orthoclase respectively, when paired with quartz. The systematic differences among the ages by the different techniques on the different minerals are used to reconstruct the cooling history of the granite. The results yield rapid cooling rates of 27.4 to 58.6 °C/Ma from 800 to 300 °C in the early stage, but slow cooling rates of 6.3 to 7.2 °C/Ma from 300 to 150 °C in the late stage. The regular sequence of oxygen isotope temperatures for the different quartz–mineral pairs demonstrates that diffusion is a dominant factor controlling the closure of both radiometric and O isotopic systems during granite cooling. Pitchblende U–Pb isochron dating yields an uranium mineralization age of 106.4±2.9 Ma, which is younger than the age of the granite emplacement and thus considerably postdates the time of magma crystallization, but is close to the closure time of the K–Ar system in the biotite. This points to a close relationship between granite cooling and ore-forming process. It appears that hydrothermal mineralization took place in the stage of slow cooling of the granite, whereas the rapid cooling of the granite was concurrent with the migration of hydrothermal fluids along fault structures. Therefore, the activity of the ore-forming hydrothermal system is temporally dictated by the cooling rates of the granite and may lag about 25 to 30 Ma behind the crystallization timing of associated granite.     

Structural and geochronological constraints on the tectonic evolution of the Dulong-Song Chay tectonic dome in Yunnan province, SW China

The Dulong-Song Chay tectonic dome lies on the border of China (SE Yunnan Province) and northern Vietnam, and consists of two tectonic and lithologic units: a core complex and a cover sequence, separated by an extensional detachment fault. These two units are overlain unconformably by Late Triassic strata. The core complex is composed of gneiss, schist and amphibolite. SHRIMP zircon U–Pb dating results for the orthogneiss yield an age of 799±10 Ma, which is considered to be the crystallization age of its igneous protolith formed in an arc-related environment. A granitic intrusion within the core complex occurred with an age of 436–402 Ma, which probably formed during partial closure of Paleotethys. Within the core complex, metamorphic grades change sharply from upper greenschist-low amphibolite facies in the core to low greenschist facies in the cover sequence. There are two arrays of foliation within the core complex, detachment fault and the cover sequence: S₁ and S₂. The pervasive S₁ is the axial plane of intrafolial S₀ folds. D₁ deformation related to this foliation is characterized by extensional structures. The strata were structurally thinned or selectively removed along the detachment faults, indicating exhumation of the Dulong-Song Chay tectonic dome. The major extension occurred at 237 Ma, determined by SHRIMP zircon U–Pb and ³⁹Ar/⁴⁰Ar isotopic dating techniques. Regionally, simultaneous tectonic extension was associated with pre-Indosinian collision between the South China and Indochina Blocks. The S₂ foliation appears as the axial plane of NW-striking S₁ buckling folds formed during a compressional regime of D₂. D₂ is associated with collision between the South China and Indochina Blocks along the Jinshajiang-Ailao Shan suture zone, and represents the Indosinian deformation. The Dulong granites intruded the Dulong-Song Chay dome at 144±2, 140±2 and 116±10 Ma based on ³⁹Ar/⁴⁰Ar measurement on muscovite and biotite. The dome was later overprinted by a conjugate strike-slip fault and related thrust fault, which formed a vortex structure, contemporaneously with late Cenozoic sinistral movement on the Ailao Shan-Red River fault.     

Timing of granite emplacement and cooling in the Songpan–Garzê Fold Belt (eastern Tibetan Plateau) with tectonic implications

New U–Pb and Rb–Sr geochronology on syn- and post-orogenic granites provide constraints on the timing of major tectonic events in the Songpan–Garzê fold belt, west Sichuan, China. The Ma Nai granite was probably syn-kinematic with the main deformation and yields an age of 197±6 Ma that is interpreted as an upper age limit of the Indosinian event. Zircons and apatites from the post-kinematic Rilonguan granite also yield Jurassic ages (195±6 and 181±4 Ma). The post-orogenic Markam massif gives two ages of 188±1 and 153±3 Ma. Both granites are undeformed and cut structures in the Triassic sedimentary rocks. These results demonstrate that the major deformation and décollement tectonics in the Songpan–Garzê fold belt occurred prior to the Early Jurassic. The wide range of ages obtained for post-kinematic granites (from Early Jurassic to Late Jurassic) suggests that, locally, magmatic activity persisted for a long time (at least 50 Ma) after the Indosinian compressional tectonism. No Tertiary ages have been obtained, suggesting that these granites were not affected strongly by the India–Asia collision.     

纳米比亚湖山铀矿地质特征、控矿因素及其成因探讨

湖山铀矿位于泛非期达马拉造山带的南部中央区带内,构造以NNE-SSW向穹窿和断裂为主。矿区内地层自老至新为艾杜西斯组、可汗组、罗辛组、楚斯组、阿兰蒂斯组、卡里比布组和卡塞布组,侵入岩为寒武纪至晚新元古代花岗岩类。晶质铀矿为主要原生矿石矿物。后期热液叠加导致了铀石、硅钙铀矿和黄硅钾铀矿等热液矿物的形成以及高岭土化、蛇纹石化、绢云母化和绿泥石化等蚀变作用。矿床的形成受矿区地层、岩浆岩和构造联合控制,矿化仅发生于D和E型花岗岩内。矿化岩体呈席状侵入于NNE-SSW向湖山背斜转折端和翼部高应力区域,赋存于罗辛组与可汗组不整合接触带及其上部的罗辛组,少量赋存于楚斯组内。矿区内构造-岩浆事件可划分为四个阶段,铀成矿作用与第四阶段构造-岩浆事件密切相关,含矿D和E型花岗岩为后造山伸展环境下富铀阿巴比斯基底重熔形成。     

Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.     

The Jinshajiang–Ailaoshan Suture Zone, China: tectonostratigraphy, age and evolution

The Jinshajiang Suture Zone is important for enhancing our understanding of the evolution of the Paleo-Tethys and its age, tectonic setting and relationship to the Ailaoshan Suture Zone have long been controversial. Based on integrated tectonic, biostratigraphic, chemostratigraphic and isotope geochronological studies, four tectono-stratigraphic units can be recognized in the Jinshajiang Suture Zone: the Eaqing Complex, the Jinshajiang Ophiolitic Melange, the Gajinxueshan “Group” and the Zhongxinrong “Group”. Isotope geochronology indicates that the redefined Eaqing Complex, composed of high-grade-metamorphic rocks, might represent the metamorphic basement of the Jinshajiang area or a remnant micro-continental fragment. Eaqing Complex protolith rocks are pre-Devonian and probably of Early–Middle Proterozoic age and are correlated with those of the Ailaoshan Complex. Two zircon U–Pb ages of 340±3 and 294±3 Ma, separately dated from the Shusong and Xuitui plagiogranites within the ophiolitic assemblage, indicate that the Jinshajiang oceanic lithosphere formed in latest Devonian to earliest Carboniferous times. The oceanic lithosphere was formed in association with the opening and spreading of the Jinshajiang oceanic basin, and was contiguous and equivalent to the Ailaoshan oceanic lithosphere preserved in the Shuanggou Ophiolitic Melange in the Ailaoshan Suture Zone; the latter yielded a U–Pb age of 362±41 Ma from plagiogranite. The re-defined Gajinxueshan and Zhongxinrong “groups” are dated as Carboniferous to Permian, and latest Permian to Middle Triassic respectively, on the basis of fossils and U–Pb dating of basic volcanic interbeds. The Gajinxueshan “Group” formed in bathyal slope to neritic shelf environments, and the Zhongxinrong “Group” as bathyal to abyssal turbidites in the Jinshajiang–Ailaoshan back-arc basin. Latest Permian–earliest Middle Triassic synorogenic granitoids, with ages of 238±18 and 227±5–255±8 Ma, respectively, and an Upper Triassic overlap molasse sequence, indicate a Middle Triassic age for the Jinshajiang–Ailaoshan Suture, formed by collision of the Changdu-Simao Block with South China.     

New U–Pb SHRIMP zircon age for the Schurwedraai alkali granite: Implications for pre-impact development of the Vredefort Dome and extent of Bushveld magmatism, South Africa

The Schurwedraai alkali granite is one of a number of prominent ultramafic-mafic and felsic intrusions in the Neoarchaean to Palaeoproterozoic sub-vertical supracrustal collar rocks of the Vredefort Dome, South Africa. The alkali granite intruded the Neoarchaean Witwatersrand Supergroup and has a peralkaline to peraluminous composition. A new zircon SHRIMP crystallization age of 2052 ± 14 Ma for the Schurwedraai alkali granite places it statistically before the Vredefort impact event at 2023 ± 4 Ma and within the accepted emplacement interval of 2050–2060 Ma of the Bushveld magmatic event. The presence of the alkali granite and associated small ultramafic-mafic intrusions in the Vredefort collar rocks extends the southern extremity of Bushveld-related intrusions to some 120 km south of Johannesburg and about 150 km south of the current outcrop area of the Bushveld Complex. The combined effect of these ultramafic-mafic and felsic bodies may have contributed to a pronouncedly steep pre-impact geothermal gradient in the Vredefort area, and to the amphibolite-grade metamorphism observed in the supracrustal collar rocks of the Vredefort Dome.     

Compressional- and transpressional-stress pattern for Pliocene and Quaternary brittle deformation in fore arc and intra-arc zones (Andes of Central and Southern Chile)

Kinematic analysis of fault slip data for stress determination was carried out on Late Miocene to Quaternary rocks from the fore arc and intra-arc regions of the Chilean Andes, between 33° and 46° south latitudes. Studies of Neogene and Quaternary infilling (the Central Depression), as well as plutonic rocks of the North Patagonian Batholith along the Liquiñe–Ofqui Fault Zone, have revealed various compressional and/or transpressional states of stress. In the Pliocene, the maximum compressional stress (σ₁) was generally oriented east–west. During the Quaternary, the deformation was partitioned into two coeval distinctive states of stress. In the fore arc zone, the state of stress was compressional, with σ₁ oriented in a N–S to NNE–SSW direction. In the intra-arc zone the state of stress was transpressional with σ₁ striking NE–SW. Along the coast, in one site (37°30′S) the Quaternary strain deformation is extensional, with an E–W direction, which can be explained by a co-seismic crustal bending readjustment.     

Magnetic overprints in granitoids and metamorphic rocks from Limousin (France): evidence for Late Variscan rotations, crustal folding and tilting

Generally, the lack of bedding criteria in basement units hampers the interpretation of paleomagnetic results in terms of geotectonics. Nevertheless, this work demonstrates that successive remagnetizations recorded in Early Carboniferous metamorphic and plutonic units, without clear bedding criteria, can be used to constrain a polyphased tectonic evolution consisting of a regional clockwise rotation, followed by a folding phase, a tilting phase and a second regional clockwise rotation.Metamorphic, ultrabasic, tonalitic and granitic rocks from different parts of Limousin (western French Massif central; 45.5°N/1.25°E), which underwent metamorphism during Devonian–Early Carboniferous or were intruded in the Early–Middle Carboniferous, were sampled in order (a) to identify the magnetic overprinting phases and the related tectono-magmatic events and (b) to constrain the regional and plate tectonic evolution of Limousin. Paleomagnetic results from 32 new and 26 sites investigated previously show that at least 90% of the magnetization isolated in rocks older than 330 Ma are overprints. In agreement with results from adjacent areas of the Variscan belt, the major overprinting phases occurred: (a) in the last stages of the major exhumation phase [332–328 Ma; mean Virtual Geomagnetic Pole (VGP) “Cp”: 37°N/70.5°E], (b) during the post-collisional syn-orogenic extension (325–315 Ma; VGP “B”: 11°N/114°E), (c) in the Latest Carboniferous and Early Permian (VGP “A1”: 27°N/149°E) and (d) in the Late Permian (VGP “A”: 48°N/146°E). The Middle–Late Carboniferous overprints “Cp” and “B” are contemporaneous with emplacement of leucogranitic, crustal derived plutons, and probably result from the hydro-thermal activity related to the magmatism. The drift from “Cp” directions to “B” directions implies that after 330 Ma, Limousin underwent a clockwise rotation by 65°, together with the Central Europe Variscides. The “Bt” components, the VGPs of which deviate from the mean apparent polar wander path (APWP) of the belt, are interpreted as “B” overprints tilted during Late Variscan tectonics, that is, in the time range 325–315 Ma. The first and most important generation of “Bt” overprints was tilted during NW–SE folding associated with NE–SW shortening, updoming and emplacement of leucogranitic plutons. The second generation reveals southeastward tilting due to NE-striking normal faulting. The drift from “B” to “A1” directions implies that Limousin has participated to the second clockwise rotation by 40° of the whole belt in Westphalian times.     

Absolute velocity of North America during the Mesozoic from paleomagnetic data

We use paleomagnetic data to map Mesozoic absolute motion of North America, using paleomagnetic Euler poles (PEP). First, we address two important questions: (1) How much clockwise rotation has been experienced by crustal blocks within and adjacent to the Colorado Plateau? (2) Why is there disagreement between the apparent polar wander (APW) path constructed using poles from southwestern North America and the alternative path based on poles from eastern North America? Regarding (1), a 10.5° clockwise rotation of the Colorado Plateau about a pole located near 35°N, 102°W seems to fit the evidence best. Regarding (2), it appears that some rock units from the Appalachian region retain a hard overprint acquired during the mid-Cretaceous, when the geomagnetic field had constant normal polarity and APW was negligible.We found three well-defined small-circle APW tracks: 245–200 Ma (PEP at 39.2°N, 245.2°E, R=81.1°, root mean square error (RMS)=1.82°), 200–160 Ma (38.5°N, 270.1°E, R=80.4°, RMS=1.06°), 160 to 125 Ma (45.1°N, 48.5°E, R=60.7°, RMS=1.84°). Intersections of these tracks (the “cusps” of Gordon et al. [Tectonics 3 (1984) 499]) are located at 59.6°N, 69.5°E (the 200 Ma or “J1” cusp) and 48.9°N, 144.0°E (the 160 Ma or “J2” cusp). At these times, the absolute velocity of North America appears to have changed abruptly.North America absolute motion also changed abruptly at the beginning and end of the Cretaceous APW stillstand, currently dated at about 125 and 88 Ma (J. Geophys. Res. 97 (1992b) 19651). During this interval, the APW path degenerates into a single point, implying rotation about an Euler pole coincident with the spin axis.Using our PEP and cusp locations, we calculate the absolute motion of seven points on the North American continent. Our intention is to provide a chronological framework for the analysis of Mesozoic tectonics. Clearly, if APW is caused by plate motion, abrupt changes in absolute motion should correlate with major tectonic events. This follows because large accelerations reflect important changes in the balance of forces acting on the plate, the most important of which are edge effects (subduction, terrane accretion, etc.). Some tectonic interpretations: (1) The J1 cusp may be associated with the inception of rifting of North America away from land masses to the east; the J2 cusp seems to mark the beginning of rapid spreading in the North Atlantic. (2) The J2 cusp signals the beginning of a period of rapid northwestward absolute motion of western North America; motion of tectonostratigraphic terranes in the westernmost Cordillera seems likely to have been directed toward the south during this interval. (3) The interval 88 to 80 Ma saw a rapid decrease in the paleolatitude of North America; unless this represents a period of true polar wander, terrane motion during this time should have been relatively northward.     

江南造山带西南段摩天岭穹隆脆韧性剪切与铀成矿作用

在造山带构造体制转换环境下,铀元素的活化、迁移和沉淀富集过程多与脆韧性剪切带的递进发育过程紧密相关。鉴于此,详细的区域和矿田构造解析是正确理解铀矿床成因的关键。华南江南造山带及其周缘分布着大面积低温铀矿床,既有晚古生代铀矿床,又有后期叠加的新生代铀矿床,均受脆韧性剪切转换带控制。华南铀矿床成矿作用具有多期叠加成矿特点,以往对单个铀矿床成矿地质和赋矿特征的研究较多,但对铀成矿作用与区域地质、构造体制及其剪切转化关系的系统研究则较为薄弱,造成对矿床成因认识很不统一,制约了对这一区铀成矿作用的深入理解。为深入了解这类铀矿床的形成机制,本文选取了摩天岭穹隆376矿床和374矿床两种不同地质特征的代表性铀矿床开展研究。通过详细地构造解析,我们认为摩天岭穹隆至少发育了五期构造变形,分别为新元古代(～820Ma)(D1期)近东西向褶皱与同构造岩浆侵位、加里东期顶部向NW的逆冲(453～426Ma)(D2期)、后加里东期NE走向的正向韧性剪切(426～295Ma)(D3期)、燕山晚期-喜马拉雅期的脆-韧性伸展(87～47Ma)(D4期)及喜马拉雅期以来的构造隆升与剥蚀(47Ma～至今)(D5期);结合显微构造与电子探针分析,认为D3期和D4期为关键铀成矿期。通过系统野外调查,以构造地质解析为主线,对新元古代三防花岗岩体及其周缘主要含矿构造与典型铀矿床的关系进行了详细解析,提出了摩天岭两种类型铀矿床由脆韧性递进变形控制的统一铀成矿模式,以期对华南铀矿勘查工作提供借鉴。     

The 2.40 Ga Ringvassøy mafic dykes, West Troms Basement Complex, Norway: The concluding act of early Palaeoproterozoic continental breakup

A north to northwest trending mafic dyke swarm of gabbronoritic and gabbroic composition makes up a significant part of the Archean basement on the island of Ringvassøy in northern Norway. U–Pb geochronology of zircon and baddeleyite in a gabbronorite provides an age of emplacement of 2403 ± 3 Ma. Metamict zircon in a plagioclase phyric dyke yield data that are discordant but consistent with the age of the gabbronoritic dyke. Titanite indicates a metamorphic overprint at 1768 ± 4 Ma. The two types of dyke show some distinct chemical characteristics. They are both tholeiitic, enriched in LREEs and LILE elements but depleted in HFS elements including Nb. Their Nd isotopic composition yields _Nd values of −1.5 to −1.8 for gabbronorites and −0.4 to +1.3 for the plagioclase phyric dykes. The chemical and isotopic constraints are typical of continental basalts.The Ringvassøy mafic dykes correlate broadly with a global Palaeoproterozoic magmatic event that formed extensive bimodal intrusive and extrusive suites in most Archaean cratons, including the northeastern Fennoscandian Shield. In detail, the 2403 ± 3 Ma Ringvassøy dykes postdated most episodes of magmatism at this time. On the regional scale there is a distinct trend from a 2505–2490 Ma suite present in the Kola Peninsula, over a second 2460–2440 Ma suite present both in Kola and further south in Karelia, to the 2403 Ma dykes on Ringvassøy. This variation suggests that the locus of maximum extension and magmatic activity may have been shifting with time.     

Trace element and isotopic (Sr, Nd, Pb, O) arguments for a mid-crustal origin of Pan-African garnet-bearing S-type granites from the Damara orogen (Namibia)

Geochronological data, major and trace element abundances, Nd and Sr isotope ratios, δ¹⁸O whole rock values and Pb isotope ratios from leached feldspars are presented for garnet-bearing granites (locality at Oetmoed and outcrop 10 km north of Omaruru) from the Damara Belt (Namibia). For the granites from outcrop 10 km N′ Omaruru, reversely discordant U–Pb monazite data give ²⁰⁷Pb/²³⁵U ages of 511±2 Ma and 517±2 Ma, similar to previously published estimates for the time of regional high grade metamorphism in the Central Zone. Based on textural and compositional variations, garnets from these granites are inferred to be refractory residues from partial melting in the deep crust. Because P–T estimates from these xenocrystic garnets are significantly higher (800°C/9–10 kbar) than regional estimates (700°C/5 kbar), the monazite ages are interpreted to date the peak of regional metamorphism in the source of the granites. Sm–Nd garnet–whole rock ages are between 500 and 490 Ma indicating the age of extraction of the granites from their deep crustal sources. For the granites from Oetmoed, both Sm–Nd and Pb–Pb ages obtained on igneous garnets range from 500 to 490 Ma. These ages are interpreted as emplacement ages and are significantly younger than the previously proposed age of 520 Ma for these granites based on Rb/Sr whole rock age determinations. Major and trace element compositions indicate that the granites are moderately to strongly peraluminous S-type granites. High initial ⁸⁷Sr/⁸⁶Sr ratios (>0.716), high δ¹⁸O values of >13.8‰, negative initial _Nd values between −4 and −7 and evolved Pb isotope ratios indicate formation of the granites by anatexis of mid-crustal rocks similar to the exposed metapelites into which they intruded. The large range of Pb isotope ratios and the lack of correlation between Pb isotope ratios and Nd and Sr isotope ratios indicate heterogeneity of the involved crustal rocks. Evidence for the involvement of isotopically highly evolved lower crust is scarce and the influence of a depleted mantle component is unlikely. The crustal heating events that produced these granites might have been caused by crustal thickening and thrusting of crustal sheets enriched in heat-producing elements. Very limited fluxing of volatiles from underthrust low- to medium-grade metasedimentary rocks may have also been a factor in promoting partial melting. Furthermore, delamination of the lithospheric mantle and uprise of hot mantle could have caused localized high-T regions. The presence of coeval A-type granites at Oetmoed that have been derived at least in part from a mantle source supports this model.     

A study of inherited zircons in granitoid rocks from the South Portuguese and Ossa-Morena Zones, Iberian Massif: support for the exotic origin of the South Portuguese Zone

Trace element and U–Pb isotopic analyses of inherited zircon cores from a sample of Gil Márquez granodiorite (South Portuguese Zone, SPZ) and Almonaster nebulite (Ossa-Morena Zone, OMZ, in the Aracena Metamorphic Belt) have been obtained using laser ablation-inductively coupled plasma-mass spectrometry. These data reveal differences in the age of deep continental crust in these two zones. Inherited zircon cores from the Ossa-Morena Zone range at 600±100 Ma, 1.7–2 Ga and 2.65–2.95 Ga, while those from the South Portuguese Zone range at 400–500 and 700–800 Ma. These data support the “exotic” origin of the South Portuguese Zone basement relative to the rest of Iberian Massif. The young ages of inherited zircon cores and Nd model ages of magmatic rocks of the South Portuguese Zone are comparable to results from granulite facies xenoliths and granitic rocks from the Meguma Terrane and Avalonia and support a correlation between the basement of the southernmost part of the Iberian Massif and the northern Appalachians.     

Ultrahigh-temperature metamorphism in the Achankovil Zone: Implications for the correlation of crustal blocks in southern India

The Achankovil Zone of southern India, a NW–SE trending lineament of 8–10 km in width and > 100 km length, is a kinematically debated crustal feature, considered to mark the boundary between the Madurai Granulite Block in the north and the Trivandrum Granulite Block in the south. Both these crustal blocks show evidence for ultrahigh-temperature metamorphism during the Pan-African orogeny, although the exhumation styles are markedly different. The Achankovil Zone is characterized by discontinuous strands of cordierite-bearing gneiss with an assemblage of cordierite + garnet + quartz + plagioclase + spinel + ilmenite + magnetite ± orthopyroxene ± biotite ± K-feldspar ± sillimanite. The lithology preserves several peak and post-peak metamorphic assemblages including: (1) orthopyroxene + garnet, (2) perthite and/or anti-perthite, (3) cordierite ± orthopyroxene corona around garnet, and (4) cordierite + quartz symplectite after garnet. We estimate the peak metamorphic conditions of these rocks using orthopyroxene-bearing geothermobarometers and feldspar solvus which yield 8.5–9.5 kbar and 940–1040 °C, the highest P–T conditions so far recorded from the Achankovil Zone. The retrograde conditions were obtained from cordierite-bearing geothermobarometers at 3.5–4.5 kbar and 720 ± 60 °C. From orthopyroxene chemistry, we record a multistage exhumation history for these rocks, which is closely comparable with those reported in recent studies from the Madurai Granulite Block, but different from those documented from the Trivandrum Granulite Block. An evaluation of the petrologic and geochronologic data, together with the nature of exhumation paths leads us to propose that the Achankovil Zone is probably the southern flank of the Madurai Granulite Block, and not a unit of the Trivandrum Granulite Block as presently believed. Post-tectonic alkali granites that form an array of “suturing plutons” along the margin of the Madurai Granulite Block and within the Achankovil Zone, but are absent in the Trivandrum Granulite Block, suggest that the boundary between the Madurai Granulite Block and the Trivandrum Granulite Block might lie along the Tenmalai shear zone at the southern extremity of the Achankovil Zone.     

Origin and evolution of the calcic and magnesian skarns hosting the El Valle-Boinás copper–gold deposit, Asturias (Spain)

The El Valle-Boinás copper–gold deposit is located in the southern part of the Rio Narcea Gold Belt 65 km west of Oviedo (NW Spain), within the Cantabrian Zone (Iberian Hercynian Massif). The deposit is related to the Boinás stock, which ranges from quartz-monzonite to monzogranite and intruded (303 Ma) the carbonated Láncara Formation (early Cambrian) and the siliciclastic Oville Formation (middle-late Cambrian).A copper–gold skarn was developed along the contact between the igneous rock and the carbonated sedimentary rocks. The skarn distribution and mineralogy reflects both structural and lithologic controls. Two types of skarn exists: a calcic skarn mainly developed in the upper calcic member of the Láncara Formation, and a magnesian skarn developed in the lower dolomitic and organic-rich member. The former mainly consists of garnet, pyroxene and wollastonite. Retrograde alteration consists of K-feldspar, epidote, quartz, calcite, magnetite, ferroactinolite, titanite, apatite, chlorite and sulfides. Magnesian skarn mainly consists of diopside with interbedded forsterite zones. Pyroxene skarn is mainly altered to tremolite, with minor phlogopite and serpentine. Olivine skarn is pervasively altered to serpentine and magnetite, and is commonly accompanied by high sulfide and gold concentrations. This altered skarn results in a very dark rock, referred to as “black skarn”, which has great importance in gold reserves. Sulfide mineralization mainly consists of chalcopyrite, bornite, arsenopyrite, pyrrhotite and pyrite, while wittichenite, sphalerite, digenite, bismuthinite, native bismuth and electrum occur as accessory minerals.After extensive erosion, reactivation of the northeast-trending fracture zone provided conduits for the subsequent emplacement of porphyritic dikes (285±4 Ma) and diabasic dikes (255±5 Ma). Alteration, characterized by sericitization, silicification, carbonatization and hypogene oxidation took place, as did sulfide mineralization (pyrite, arsenopyrite, sphalerite, chalcopyrite, galena, bournonite, and Fe–Pb–Sb sulfosalts). Veins with quartz, carbonate, adularia and sulfide minerals crosscut all previous lithologies. Jasper and jasperoid breccias developed at the upper parts of the deposits.The fluid inclusion and stable isotope studies suggest a predominantly magmatic prograde-skarn fluid characterized by high-salinity (26–28 wt.% KCl and 32–36 wt.% NaCl) and high temperature, above 580°C. This fluid evolved into two immiscible fluids: a CO₂- and/or CH₄-rich, high-salinity aqueous fluid. Temperatures for the first retrograde-stage are between 350 and 425°C. A second stage is related to a more diluted aqueous fluid (3–6.2 wt.% NaCl eq.) and temperatures from 280 to 325°C. The fluid inclusion study performed on quartz from low-temperature mineralization indicates a very low salinity (0.2–6.2 wt.% NaCl eq.), low-temperature aqueous fluid (from 150 to 250°C), and trapping pressure conditions less than 0.2 kbar. In addition, the stable isotope study suggests that an influx of metamorphic waters derived from the country rocks produced these lower temperature fluids. The last control for the Au mineralization is the Alpine tectonism, which developed fault breccias (cataclasites to, locally, protomylonites) and gold remobilization from previous mineralization.