Temporal variations in magma composition at Merapi Volcano (Central Java, Indonesia): magmatic cycles during the past 2000 years of explosive activity

Merapi Volcano (Central Java, Indonesia) has been frequently active during Middle to Late Holocene time producing basalts and basaltic andesites of medium-K composition in earlier stages of activity and high-K magmas from 1900 ¹⁴C yr BP to the present. Radiocarbon dating of pyroclastic deposits indicates an almost continuous activity with periods of high eruption rates alternating with shorter time spans of distinctly reduced eruptive frequency since the first appearance of high-K volcanic rocks. Geochemical data of 28 well-dated, prehistoric pyroclastic flows of the Merapi high-K series indicate systematic cyclic variations. These medium-term compositional variations result from a complex interplay of several magmatic processes, which ultimately control the periodicity and frequency of eruptions at Merapi. Low eruption rates and the absence of new influxes of primitive magma from depth allow the generation of basaltic andesite magma (56–57 wt% SiO₂) in a small-volume magma reservoir through fractional crystallisation from parental mafic magma (52–53 wt% SiO₂) in periods of low eruptive frequency. Magmas of intermediate composition erupted during these stages provide evidence for periodic withdrawal of magma from a steadily fractionating magma chamber. Subsequent periods are characterised by high eruption rates that coincide with shifts of whole-rock compositions from basaltic andesite to basalt. This compositional variation is interpreted to originate from influxes of primitive magma into a continuously active magma chamber, triggering the eruption of evolved magma after periods of low eruptive frequency. Batches of primitive magma eventually mix with residual magma in the magmatic reservoir to decrease whole-rock SiO₂ contents. Supply of primitive magma at Merapi appears to be sufficiently frequent that andesites or more differentiated rock types were not generated during the past 2000 years of activity. Cyclic variations also occurred during the recent eruptive period since AD 1883. The most recent eruptive episode of Merapi is characterised by essentially uniform magma compositions that may imply the existence of a continuously active magma reservoir, maintained in a quasi-steady state by magma recharge. The whole-rock compositions at the upper limit of the total SiO₂ range of the Merapi suite could also indicate the beginning of another period of high eruption rates and shifts towards more mafic compositions.     

Geology and eruptive history of Unzen volcano, Shimabara Peninsula, Kyushu, SW Japan

During the past 500 thousand years, Unzen volcano, an active composite volcano in the Southwest Japan Arc, has erupted lavas and pyroclastic materials of andesite to dacite composition and has developed a volcanotectonic graben. The volcano can be divided into the Older and the Younger Unzen volcanoes. The exposed rocks of the Older Unzen volcano are composed of thick lava flows and pyroclastic deposits dated around 200–300 ka. Drill cores recovered from the basal part of the Older Unzen volcano are dated at 400–500 ka. The volcanic rocks of the Older Unzen exceed 120 km³ in volume. The Younger Unzen volcano is composed of lava domes and pyroclastic deposits, mostly younger than 100 ka. This younger volcanic edifice comprises Nodake, Myokendake, Fugendake, and Mayuyama volcanoes. Nodake, Myokendake and Fugendake volcanoes are 100–70 ka, 30–20 ka, and <20 ka, respectively. Mayuyama volcano formed huge lava domes on the eastern flank of the Unzen composite volcano about 4000 years ago. Total eruptive volume of the Younger Unzen volcano is about 8 km³, and the eruptive production rate is one order of magnitude smaller than that of the Older Unzen volcano.     

Modeling of pyroclastic flows of Colima Volcano,Mexico: implications for hazard assessment

The 18–24 January 1913 eruption of Colima Volcano consisted of three eruptive phases that produced a complex sequence of tephra fall, pyroclastic surges and pyroclastic flows, with a total volume of 1.1 km³ (0.31 km³ DRE). Among these events, the pyroclastic flows are most interesting because their generation mechanisms changed with time. They started with gravitanional dome collapse (block-and-ash flow deposits, Merapi-type), changed to dome collapse triggered by a Vulcanian explosion (block-and-ash flow deposits, Soufrière-type), then ended with the partial collapse of a Plinian column (ash-flow deposits rich in pumice or scoria,). The best exposures of these deposits occur in the southern gullies of the volcano where Heim Coefficients (H/L) were obtained for the various types of flows. Average H/L values of these deposits varied from 0.40 for the Merapi-type (similar to the block-and-ash flow deposits produced during the 1991 and 1994 eruptions), 0.26 for the Soufrière-type events, and 0.17–0.26 for the column collapse ash flows. Additionally, the information of 1991, 1994 and 1998–1999 pyroclastic flow events was used to delimit hazard zones. In order to reconstruct the paths, velocities, and extents of the 20th Century pyroclastic flows, a series of computer simulations were conducted using the program FLOW3D with appropriate Heim coefficients and apparent viscosities. The model results provide a basis for estimating the areas and levels of hazard that could be associated with the next probable worst-case scenario eruption of the volcano. Three areas were traced according to the degree of hazard and pyroclastic flow type recurrence through time. Zone 1 has the largest probability to be reached by short runout (<5 km) Merapi and Soufrière pyroclastic flows, that have occurred every 3 years during the last decade. Zone 2 might be affected by Soufriere-type pyroclastic flows (∼9 km long) similar to those produced during phase II of the 1913 eruption. Zone 3 will only be affected by pyroclastic flows (∼15 km long) formed by the collapse of a Plinian eruptive column, like that of the 1913 climactic eruption. Today, an eruption of the same magnitude as that of 1913 would affect about 15,000 inhabitants of small villages, ranches and towns located within 15 km south of the volcano. Such towns include Yerbabuena, and Becerrera in the State of Colima, and Tonila, San Marcos, Cofradia, and Juan Barragán in the State of Jalisco.     

Mélanges magmatiques à la Montagne Pelée (Martinique) Origine des eruptions de type Saint-Vincent

During the last 40,000 years B.P. the eruptive activity of Mont Pelée (Martinique) has been exclusively pyroclastic, including mainly pumice flow deposits, Pelean-type and Merapi-type nuée ardente deposits, characterized by an andesitic to dacitic magma composition. In addition, a few Saint-Vincent-type nuée ardente deposits are present. Their products are compositionally more basic (basalt, basaltic andesite) and show some characteristic magma mixing features. Two well defined Saint-Vincent type eruptions, named SV1 and SV2 have been studied here. They have been dated by the C¹⁴ method respectively at 25,700±1,200 and 22,300±1,200 years B.P. Both follow a similar eruptive pattern, evolving from an andesitic to a more basic magma composition, through an intermediate stage of magma mixing. The volume of ejected products is extensive (1 km³ or more), compared with other deposits such as the Pelean-type nuée ardente. The moderate and progressive variations of magma composition (3 to 6 % SiO₂), mineralogy and crystallization pressure-temperature conditions (T: 920°–930° to 950°970°C, using Fe-Ti oxides geothermometer) demonstrate the cogenetic nature of these various magmas. These results, as well as the study of the recent activity of Mont Pelée suggest that during a former period (about 40,000 to 20,000 years B.P.), two magmatic chambers existed rather close to one another. The triggering of these Saint-Vincent type nuée ardente eruptions might involve injections of less-differentiated magma from a lower to a shallower reservoir, followed by the emptying of both reservoirs. During the recent period (less than 13,500 years B.P.), the cyclic eruptive activity of Mont Pelée Volcano has been controlled mainly by a relatively shallow and permanent magmatic chamber. The triggering of eruptions has depended on two processes: volatile overpressure and periodic replenishment of this superficial reservoir by deeper and less-differentiated magma injections. This change in eruptive character results perhaps from succession of SV1 and SV2 Saint-Vincent type eruptions; the volcano deep-structure might have changed, as a consequence of the extensive volume of ejected products.     

A comparison of the recent eruptions of Mt. Pelée,Martinique and Soufrière,St. Vincent

The simultaneous eruption of Mt. Pelée, Martinique and Soufrière, St. Vincent are regarded as the first recognized examples of Pelean-type and St. Vincent-type pyroclastic eruptions. Both produced nuées ardentes, the former usually laterally directed because of the presence of a dome and the latter vertically directed from an open crater. Both volcanoes have subsequently erupted for a second time this century. The 1902–05 and 1929–32 eruptions of Mt. Pelée produced andesite lava of almost identical composition and mineralogy. Both contain two generations of plagioclase, orthopyroxene, Fe-Ti oxide, corroded brown amphibole and olivine rimmed by pyroxene. In contrast, the Soufrière material is more basic in composition varying from basaltic andesite to basalt in 1902–03 and basaltic andesite in 1971–72. The Soufrière material contains two generations of plagioclase (with those of 1971–72 having additional zones of labradorite), clinopyroxene, orthopyroxene, olivine and Fe-Ti oxide. The pyroclastic deposits are strikingly different, those from the Pelean-type eruption are termed «block and ash deposits» being characterised by poorly vesicular lava blocks up to 7 m in diameter, while the St. Vincent-type eruption produced «scoria and ash deposits» containing vesicular ropey blocks or bombs no larger than 1 m in diameter. The differences in styles of eruption are attributed to differences in viscosity and mechanism of eruption of the magmas. Stratigraphic studies of Mt. Pelée reveal that the volcano has produced basaltic andesite scoria and ash deposits from St. Vincent-type eruptions. It is concluded that the recent eruptions of Pelée tapped a deep level magma during both eruptions releasing magma of similar composition, while the 1971 Soufrière magma is thought to be a remnant of the 1903 basaltic magma which remained at a high level within the volcano where it underwent enrichment in plagioclase and loss of olivine and oxide.     

The geology of Mount Hasan stratovolcano, central Anatolia, Turkey

Mount Hasan is a double-peaked stratovolcano, located in Central Anatolia, Turkey. The magmas erupted from this multi-caldera complex range from basalt to rhyolite, but are dominated by andesite and dacite. Two terminal cones (Big Mt. Hasan and Small Mt. Hasan) culminate at 3253 m and 3069 m respectively. There are four evolutionary stages in the history of the volcanic complex (stage 1: Kecikalesi volcano, 13 Ma, stage 2: Palaeovolcano, 7 Ma, stage 3: Mesovolcano and stage 4: Neovolcano). The eruptive products consist of lava flows, lava domes, and pyroclastic rocks. The later include ignimbrites, phreatomagmatic intrusive breccias and nuées ardentes, sometimes reworked as lahars. The total volume is estimated to be 354 km³, the area extent 760 km². Textural and mineralogical data suggest that both magma mixing and fractional crystallization were involved in the generation of the andesites and dacites. The magmas erupted from the central volcanoes show a transition with time from tholeite to calc-alkaline. Three generations of basaltic strombolian cones and lava flows were emplaced contemporaneously with the central volcanoes. The corresponding lavas are alkaline with a sodic tendency.     

The formation of various ash flows in Indonesia

A thorough analysis of the mode of occurrence of various ash flows deposits in Indonesia confirms the present author’s belief in an important difference in mechanism of formation between ash-flow tuff sheets abundantly found in the island of Sumatra and those minor ash flows of nuée ardentes type produced by orogenic volcanic activity such as displayed by Mt Merapi and Mt Agung in Java and Bali. The present author is more inclined to think that the enormous ash-flow sheets in Sumatra, usually called « welded tuffs » are nothing more than collapsed froth flows emitted from fissures and closely related to the emplacement of granite batholiths in the core of the geanticlines during the third impulse of orogenic uplift in Plio-Pleistocene time, whereas they have nothing to do whatsoever with nuée ardentes in the sense of Lacroix. These nuée ardentes on the other hand are believed to be the result of a delayed action in the formation of crystal nuclei during the magmatic gas phase of a volcanic eruption.     

Merapi volcano (Java,Indonesia) and Merapi-type Nuée ardente

A particular nuée ardente type (Merapi-type avalanche nuée) has been defined at the Merapi volcano because of its prominent role in the recent activity of the volcano: gravity plays a significant role during the eruption. However, some other eruption styles occur too producing surges and ashfalls. Three types of tephra, deposited in a very short time-span (15 years) are compared: chemistry and mineralogy are similar, but grain-size analyses are different. There is no vesicular glass, and it is concluded that there is an absence of new magma. This example shows clearly the variety of volcanic styles, with similar chemistry in a very short period. Avalanche nuées from collapsed domes or flows are separated into two types:

1. Merapi-typesensu stricto, without any fresh glass, derived from a wholly solidified dome.
2. Arenal-type, containing pumiceous glass, derived from a dome, the interior of which is still liquid.

     

Eruption of kimberlite magmas: physical volcanology, geomorphology and age of the youngest kimberlitic volcanoes known on earth (the Upper Pleistocene/Holocene Igwisi Hills volcanoes, Tanzania)

The Igwisi Hills volcanoes (IHV), Tanzania, are unique and important in preserving extra-crater lavas and pyroclastic edifices. They provide critical insights into the eruptive behaviour of kimberlite magmas that are not available at other known kimberlite volcanoes. Cosmogenic ³He dating of olivine crystals from IHV lavas and palaeomagnetic analyses indicates that they are Upper Pleistocene to Holocene in age. This makes them the youngest known kimberlite bodies on Earth by >30?Ma and may indicate a new phase of kimberlite volcanism on the Tanzania craton. Geological mapping, Global Positioning System surveying and field investigations reveal that each volcano comprises partially eroded pyroclastic edifices, craters and lavas. The volcanoes stand <40?m above the surrounding ground and are comparable in size to small monogenetic basaltic volcanoes. Pyroclastic cones consist of diffusely layered pyroclastic fall deposits comprising scoriaceous, pelletal and dense juvenile pyroclasts. Pyroclasts are similar to those documented in many ancient kimberlite pipes, indicating overlap in magma fragmentation dynamics between the Igwisi eruptions and other kimberlite eruptions. Characteristics of the pyroclastic cone deposits, including an absence of ballistic clasts and dominantly poorly vesicular scoria lapillistones and lapilli tuffs, indicate relatively weak explosive activity. Lava flow features indicate unexpectedly high viscosities (estimated at >10² to 10⁶?Pa?s) for kimberlite, attributed to degassing and in-vent cooling. Each volcano is inferred to be the result of a small-volume, short-lived (days to weeks) monogenetic eruption. The eruptive processes of each Igwisi volcano were broadly similar and developed through three phases: (1) fallout of lithic-bearing pyroclastic rocks during explosive excavation of craters and conduits; (2) fallout of juvenile lapilli from unsteady eruption columns and the construction of pyroclastic edifices around the vent; and (3) effusion of degassed viscous magma as lava flows. These processes are similar to those observed for other small-volume monogenetic eruptions (e.g. of basaltic magma).     

An extremely large magnitude eruption close to the Plio-Pleistocene boundary: reconstruction of eruptive style and history of the Ebisutoge-Fukuda tephra, central Japan

An extremely large magnitude eruption of the Ebisutoge-Fukuda tephra, close to the Plio-Pleistocene boundary, central Japan, spread volcanic materials widely more than 290,000 km² reaching more than 300 km from the probable source. Characteristics of the distal air-fall ash (>150 km away from the vent) and proximal pyroclastic deposits are clarified to constrain the eruptive style, history, and magnitude of the Ebisutoge-Fukuda eruption.Eruptive history had five phases. Phase 1 is phreatoplinian eruption producing >105 km³ of volcanic materials. Phases 2 and 3 are plinian eruption and transition to pyroclastic flow. Plinian activity also occurred in phase 4, which ejected conspicuous obsidian fragments to the distal locations. In phase 5, collapse of eruption column triggered by phase 4, generated large pyroclastic flow in all directions and resulted in more than 250–350 km³ of deposits. Thus, the total volume of this tephra amounts over 380–490 km³. This indicates that the Volcanic Explosivity Index (VEI) of the Ebisutoge-Fukuda tephra is greater than 7. The huge thickness of reworked volcaniclastic deposits overlying the fall units also attests to the tremendous volume of eruptive materials of this tephra.Numerous ancient tephra layers with large volume have been reported worldwide, but sources and eruptive history are often unknown and difficult to determine. Comparison of distal air-fall ashes with proximal pyroclastic deposits revealed eruption style, history and magnitude of the Ebisutoge-Fukuda tephra. Hence, recognition of the Ebisutoge-Fukuda tephra, is useful for understanding the volcanic activity during the Pliocene to Pleistocene, is important as a boundary marker bed, and can be used to interpret the global environmental and climatic impact of large magnitude eruptions in the past.     

The occurrence of Mt Barca flank eruption in the evolution of the NW periphery of Etna volcano (Italy)

Geological surveys, tephrostratigraphic study, and ⁴⁰Ar/³⁹Ar age determinations have allowed us to chronologically constrain the geological evolution of the lower NW flank of Etna volcano and to reconstruct the eruptive style of the Mt Barca flank eruption. This peripheral sector of the Mt Etna edifice, corresponding to the upper Simeto valley, was invaded by the Ellittico volcano lava flows between 41 and 29 ka ago when the Mt Barca eruption occurred. The vent of this flank eruption is located at about 15 km away from the summit craters, close to the town of Bronte. The Mt Barca eruption was characterized by a vigorous explosive activity that produced pyroclastic deposits dispersed eastward and minor effusive activity with the emission of a 1.1-km-long lava flow. Explosive activity was characterized by a phreatomagmatic phase followed by a magmatic one. The geological setting of this peripheral sector of the volcano favors the interaction between the rising magma and the shallow groundwater hosted in the volcanic pile resting on the impermeable sedimentary basement. This process produced phreatomagmatic activity in the first phase of the eruption, forming a pyroclastic fall deposit made of high-density, poorly vesicular scoria lapilli and lithic clasts. Conversely, during the second phase, a typical strombolian fall deposit formed. In terms of hazard assessment, the possible occurrence of this type of highly explosive flank eruption, at lower elevation in the densely inhabited areas, increases the volcanic risk in the Etnean region and widens the already known hazard scenario.     

40Ar/39Ar constraints on the temporal evolution of Graciosa Island, Azores (Portugal)

Lava flows spanning the eruptive record of Graciosa Island (Azores archipelago) and a gabbro xenolith were dated by ⁴⁰Ar/³⁹Ar in order to constrain the Pleistocene and Holocene volcanic evolution of the island. The results range from 1.05 Ma to 3.9 ka, whereas prior published K–Ar and ¹⁴C ages range from 620 to 2 ka. The formation of the Serra das Fontes shield volcano started at minimum 1.05 Ma, and the magmatic system was active for ca. 600 ky, as suggested by the formation of the gabbro xenolith by magmatic differentiation. Evolved magmas making up the Serra das Fontes–Serra Branca composite volcano were generated at ca. 450 ka. After a period of ca. 110 ky of volcanic inactivity and erosion of volcanic edifices, volcanism was reactivated with the formation of the Vitória Unit NW platform. Later, the development of the Vulcão Central Unit started with the formation of monogenetic cones located to the south of the Serra das Fontes–Serra Branca–Vitória Unit. This volcanism became progressively more evolved and was concentrated in a main eruptive center, forming the Vulcão Central stratovolcano with an age older than 50 ka. The caldera related to this stratovolcano is older than 47 ka and was followed by effusion of basaltic magmas into the caldera, resulting in the formation of a lava lake, which ultimately spilled over the caldera rim at ca. 11 ka. The most recent eruptions on Graciosa formed two small pyroclastic cones within the caldera and the Pico do Timão cone within the Vitória Unit at ca 3.9 ka.     

The eruptive history of the Tequila volcanic field, western Mexico: ages, volumes, and relative proportions of lava types

The eruptive history of the Tequila volcanic field (1600 km²) in the western Trans-Mexican Volcanic Belt is based on ⁴⁰Ar/³⁹Ar chronology and volume estimates for eruptive units younger than 1 Ma. Ages are reported for 49 volcanic units, including Volcán Tequila (an andesitic stratovolcano) and peripheral domes, flows, and scoria cones. Volumes of volcanic units 1 Ma were obtained with the aid of field mapping, ortho aerial photographs, digital elevation models (DEMs), and ArcGIS software. Between 1120 and 200 kyrs ago, a bimodal distribution of rhyolite (~35 km³) and high-Ti basalt (~39 km³) dominated the volcanic field. Between 685 and 225 kyrs ago, less than 3 km³ of andesite and dacite erupted from more than 15 isolated vents; these lavas are crystal-poor and show little evidence of storage in an upper crustal chamber. Approximately 200 kyr ago, ~31 km³ of andesite erupted to form the stratocone of Volcán Tequila. The phenocryst assemblage of these lavas suggests storage within a chamber at ~2–3 km depth. After a hiatus of ~110 kyrs, ~15 km³ of andesite erupted along the W and SE flanks of Volcán Tequila at ~90 ka, most likely from a second, discrete magma chamber located at ~5–6 km depth. The youngest volcanic feature (~60 ka) is the small andesitic volcano Cerro Tomasillo (~2 km³). Over the last 1 Myr, a total of 128±22 km³ of lava erupted in the Tequila volcanic field, leading to an average eruption rate of ~0.13 km³/kyr. This volume erupted over ~1600 km², leading to an average lava accumulation rate of ~8 cm/kyr. The relative proportions of lava types are ~22–43% basalt, ~0.4–1% basaltic andesite, ~29–54% andesite, ~2–3% dacite, and ~18–40% rhyolite. On the basis of eruptive sequence, proportions of lava types, phenocryst assemblages, textures, and chemical composition, the lavas do not reflect the differentiation of a single (or only a few) parental liquids in a long-lived magma chamber. The rhyolites are geochemically diverse and were likely formed by episodic partial melting of upper crustal rocks in response to emplacement of basalts. There are no examples of mingled rhyolitic and basaltic magmas. Whatever mechanism is invoked to explain the generation of andesite at the Tequila volcanic field, it must be consistent with a dominantly bimodal distribution of high-Ti basalt and rhyolite for an 800 kyr interval beginning ~1 Ma, which abruptly switched to punctuated bursts of predominantly andesitic volcanism over the last 200 kyrs.Electronic Supplementary Material Supplementary material is available in the online version of this article at Editorial responsility: J. Donnelly-NolanThis revised version was published online in January 2005 with corrections to Tables 1 and 3.An erratum to this article can be found at     

Nuées Ardentes of the 1968 Eruption of Mayon Volcano,Philippines

Mayon Volcano, southeastern Luzon, began a series of explosive eruptions at 0900 April 21, 1968, and by May 15 more than 100 explosions had occurred, at least 6 people had been killed, and roughly 100 square km had been covered by more than 5 cm of airfall ash, blocky ash flows, and a lava flow. All material crupted was porphyritic augite-hypersthene andesite. Explosions from the summit crater (elevation 2460 m) ejected large quantities of ash and incandescent blocks to a height exceeding 600 m and produced ash-laden clouds which rose to heights of 3 to 10 km. Backfall of the coarser material fed nuées ardentes which repeatedly swept down ravines on all sides of the volcanic cone. The velocity of one nuée ardente ranged from 9 to 63 m per sec. The largest nuées descended to the southwest and reached as far as 7 km from the summit. An aa lava flow also descended 3 1/2 km down this flank. The nuées ardentes deposited pyroclastic flows that contained large breadcrust-surfaced blocks averaging about 30 cm across, but occasionally reaching 25 m in greatest dimension. These blocks were still very hot in their interiors several days later. Surrounding the pyroclastic flows is a seared zone as much as 2 km wide, but averaging a few hundred meters, in which vegetation is charred and splintered, but over which only a thin layer of airfall ash was deposited.     

Tungurahua Volcano,Ecuador: structure,eruptive history and hazards

Tungurahua, one of Ecuador's most active volcanoes, is made up of three volcanic edifices. Tungurahua I was a 14-km-wide andesitic stratocone which experienced at least one sector collapse followed by the extrusion of a dacite lava series. Tungurahua II, mainly composed of acid andesite lava flows younger than 14,000 years BP, was partly destroyed by the last collapse event, 2955±90 years ago, which left a large amphitheater and produced a ∼8-km³ debris deposit. The avalanche collided with the high ridge immediately to the west of the cone and was diverted to the northwest and southwest for ∼15 km. A large lahar formed during this event, which was followed in turn by dacite extrusion. Southwestward, the damming of the Chambo valley by the avalanche deposit resulted in a ∼10-km-long lake, which was subsequently breached, generating another catastrophic debris flow. The eruptive activity of the present volcano (Tungurahua III) has rebuilt the cone to about 50% of its pre-collapse size by the emission of ∼3 km³ of volcanic products. Two periods of construction are recognized in Tungurahua's III history. From ∼2300 to ∼1400 years BP, high rates of lava extrusion and pyroclastic flows occurred. During this period, the magma composition did not evolve significantly, remaining essentially basic andesite. During the last ∼1300 years, eruptive episodes take place roughly once per century and generally begin with lapilli fall and pyroclastic flow activity of varied composition (andesite+dacite), and end with more basic andesite lava flows or crater plugs. This pattern is observed in the three historic eruptions of 1773, 1886 and 1916–1918. Given good age control and volumetric considerations, Tungurahua III growth's rate is estimated at ∼1.5×10⁶ m³/year over the last 2300 years. Although an infrequent event, a sector collapse and associated lahars constitute a strong hazard of this volcano. Given the ∼3000 m relief and steep slopes of the present cone, a future collapse, even of small volume, could cover an area similar to that affected by the ∼3000-year-old avalanche. The more frequent eruptive episodes of each century, characterized by pyroclastic flows, lavas, lahars, as well as tephra falls, directly threaten 25,000 people and the Agoyan hydroelectric dam located at the foot of the volcano.     

Geology and eruptive history of the Rabaul Caldera area, Papua New Guinea

Rabaul Caldera is the most recently active (1937–1943) of four adjoining volcanic centres aligned north-south through the northern extremity of eastern New Britain. Geological mapping after the 1983–1985 Rabaul seismic and deformation crisis has partially revealed a long and complex eruption history dominated by numerous explosive eruptions, the largest accompanied by caldera collapse. The oldest exposed eruptives are the basaltic pre-caldera cone Tovanumbatir Lavas K/Ar dated at 0.5 Ma. The dacitic Rabaul Quarry Lavas exposed in the caldera wall and K/Ar dated at 0.19 Ma, are overlain by a sequence of dacitic and andesitic pyroclastic flow and fall deposits. Uplifted coral reef limestones, interbedded within the pyroclastic sequence on the northeast coast, suggest that explosive eruptions in the Rabaul area had commenced prior to the 0.125 Ma last interglacial high sea level stand. The pyroclastic sequence includes the large Boroi Ignimbrites and Malaguna Pyroclastics both ⁴⁰Ar/³⁹Ar dated at about 0.1 Ma, and the Barge Tunnel Ignimbrite ⁴⁰Ar/³⁹Ar dated at around 0.04 Ma. Few reliable ages exist for the many younger eruptives. These include Holocene ignimbrites of the latest caldera-forming eruptions—the Raluan Pyroclastics variously dated (¹⁴C) at either about 3500 or 7000 yr B.P., and the ca. 1400 yr B.P. Rabaul Pyroclastics. At least eight intracaldera eruptions have occurred since the 1400 yr B.P. collapse, building small pyroclastic and lava cones within the caldera.A major erosional episode is evident as a widespread unconformity in the upper pyroclastic stratigraphy at Rabaul. Lacking relevant radiometric ages, this episode is assumed to have occurred during last glaciation low sea levels and is here arbitarily dated at ca. ?20 ka. At least five, possibly nine, significant ignimbrite eruptions have occurred at Rabaul during the last ?20 ka. The new eruptive history differs considerably from that previously published, which considered ignimbrite eruption and caldera collapse to have first occurred at 3500 yr B.P.Rabaul volcanism has been dominated by two main types: (a) basaltic and basaltic andesite cone building eruptions; and (b) dacitic, and rarely andesitic or rhyolitic, plinian/ignimbrite eruptions of both high- and low-aspect ratio types. The 1400 yr B.P. Rabaul Ignimbrite is a type example of a low-aspect ratio, high-energy, and potentially very damaging eruption. Fine vitric ash deposits, common in the Rabaul pyroclastic sequence, demonstrate the frequent modification of eruptions by external water probably related to early caldera lakes or bays. Interbedding of these fine ashes with plinian pumice lapilli beds suggests that many early eruptions occurred from multiple vents, located in both wet and dry areas.     

The distribution of tephra deposits and reconstructing the parameters of 1973 eruption on Tyatya Volcano,Kunashir I., Kuril Islands

We studied the distribution of tephra deposits discharged by the basaltic (52–54% SiO₂) explosive eruption of 1973 on Tyatya Volcano (Kunashir I., Kuril Islands). We made maps showing lines of equal tephra thickness (isopachs) and lines of maximum size of pyroclastic particles (isopleths). These data were used to find the parameters of explosive activity using the standard techniques for each of the two phases of this eruption separately. The first, phreatomagmatic, phase discharged 0.008 km³ of tephra during the generation of maars on the volcano’s northern slope. The tephra mostly consisted of fragmented host rocks with admixtures of fragments of low vesiculated juvenile basalt. The phase lasted 20 hours, the rate of pyroclastic discharge was 2 × 10⁵ kg/s; the eruptive plume reached heights of 4–6 km with wind speeds within 10 m/s. The second, magmatic, phase discharged 0.07 km³ of tephra during the generation of the Otvazhnyi scoria cone on the volcano’s southeastern slope. The tephra mostly consisted of juvenile basaltic scoria. The highly explosive Plinian part of this phase lasted 36 hours, the rate of pyroclastic discharge was 8 × 10⁵ kg/s; the eruptive plume reached heights of 6–8 km with wind speeds of 10–20 m/s. The total tephra volume discharged by the eruption was approximately 0.08 km³; the total amount of ejected pyroclastic material (including the resulting monogenic edifices) was 0.11 km³; the volume of erupted magma was 0.05 km³ (the conversion was based on 2800 kg/m³ density); the volcanic explosivity index, or VEI, was 3. The production rate of the Tyatya plumbing system is estimated as 3 × 10⁵ m³ magma per annum.     

Preliminary report on the 1963 eruption of Mt.Agung in Bali (Indonesia)

Mt. Agung in Bali which has been dormant for about hundred and twenty years showed increased activity on February 18 this year culminating with a paroxysmal eruption early in the morning on March 17; the second paroxysmal eruption occurred on May 16. The activity started with minor explosions in the main crater with the production of pyroclastics followed by the effusion of lavas which flowed over the lowest northern crater rim and the formation of nuées ardentes d’explosion which came down into the northwestern sector of the volcano. Successive nuées ardentes d’explosion which accompanied the paroxysmal cruption on March 17 and on May 16, came down along the southern, southeastern and northern slopes, devastating many villages. The first cycle of activity killed about 1700 people of which 1500 died from the nuées ardentes. Cold lahars, caused by heavy rainfall immediately after the eruption destroyed villages and constructions on the southern slope and killed about 200 more people. The nuées ardentes from the second paroxysmal eruption killed also about 200 more people who were all caught in the « Closed Zone ». A map showing the devastated area is presented.     

Volume,energy and cyclicity of eruptions of Arenal volcano,Costa Rica

The 1968–73 (and continuing) eruption of Arenal Volcano, Costa Rica, a small 1633 m strato-volcano with long periods of repose, defines an eruptive cycle which is typical of Arenal’s pre-historic eruptions. An intense, short explosive phase (July 29–31, 1968) grades into an effusive phase, and is followed by a block lava flow. The eruptive rocks become increasingly less differentiated with time in a given cycle, ranging from andesite to basaltic andesite. Nuées ardentes are a characteristic of the initial explosions, and are caused by fall-back ejecta on slopes around the main crater — an explosion crater in the 1968 eruption — which coalesce into hot avalanches and descend major drainage channels. Total volume of pyroclastic flows was small, about 1.8 ± 0.5 × 10ⁿ m³, in the July 29–31 explosions, and are block and ash flows, with much accidental material. Overpressures, ranging up to perhaps 5 kilobars just prior to major explosions, were estimated from velocities of large ejected blocks, which had velocities of up to 600 m/sec. Total kinetic energy and volume of ejecta of all explosions are an estimated 3 × 10²² ergs and 0.03 km³, respectively. The block lava flow, emitted from Sept., 1968 to 1973 (and continuing) has a volume greater than 0.06 km³, and covers 2.7 km² at thicknesses ranging from 15 to over 100 m. The total volumes of the explosive and effusive phases for the 1968–73 eruption are about 0.05 km³ and 0.06 km³, respectively. The last eruption of Arenal occurred about 1500 AD. based on radiocarbon dating and archaeological means, and was about twice as voluminous as the current one (0.17 km³ versus 0.09 km³). The total thermal energies for this pre-historic eruption and the current one are 8 × 10²³ and 18 × 10²³, respectively. The total volume of Arenal’s cone is about 6 km³ from 1633 m (summit) to 500 m, and, estimates of age based on the average rate of cone growth from these two eruptions, suggest an age between 20,000 to 200,000 years.