共查询到20条相似文献,搜索用时 15 毫秒
1.
Group Decision Making-Based Fuzzy Pattern Recognition Model for Lectotype Optimization of Offshore Platforms 总被引:1,自引:0,他引:1
This paper develops a fuzzy pattern recognition model for group decision making to solve the problem of lectotype optimization of offshore platforms. The lack of data and the inexact or incomplete information for criteria are the main cause of uncertainty in the evaluation process, therefore it is necessary to integrate the judgments from different decision makers with different experience, knowledge and preference. This paper first uses a complementary principle-based pairwise comparison method to obtain the subjective weight of the criteria from each decision maker. A fuzzy pattern recognition model is then developed to integrate the judgments from all the decision makers and the information from the criteria, under the supervision of the subjective weights. Finally a case study is given to show the efficiency and robustness of the proposed model. 相似文献
2.
Fuzzy Optimum Model of Semi-Structural Decision for Lectotype Optimization of Offshore Platforms 总被引:8,自引:0,他引:8
In the process of concept design of offshore platforms, it is necessary to select the best from feasible alternatives through comparison and filter. The criterion set, used to evaluate and select the satisfying alternative, consists of many qualitative and quantitative factors. Therefore, the selection is a problem of multicriteria and semi- structural decision- making. Different from traditional methods in semi- structural decision- making, a new framework and methodology is presented in this paper for evaluation of offshore platform alternatives. First, the criterion set is established for the evaluation of alternatives. Next, the approach is studied to construct the relative membership degree matrix, in which both qualitative and quantitative factors are consistent with the uniform calculating standard. And then a new weight-assessing method is developed for calculation of the weights based on the relative membership degree matrix. Finally, a multi-hierarchy fuzzy optimum model is adopted to select t 相似文献
3.
4.
WANG Licheng 《中国海洋工程》2001,(2):153-164
A Three-Scale Fuzzy Analytical Hierarchy Process (T-FAHP) is proposed by introducing the Three-Scale Analytical Hierarchy Process (T-AHP) and the trapezoid fuzzy number. A multi-objective optimization model based on the T-FAHP is presented subsequently, in which many factors influencing the lectotype of offshore platform are taken into account synthetically, such as the original investment, the maintenance cost, the ability of resisting fatigue and corrosion, the construction period, the threat to the environment, and so on. With this method, the experts can give the relatively precise ranking weight of each index and at the same time the requirement of consistence checking can be met. The result of a calculation example shows that the T-FAHP is practical. 相似文献
5.
In consideration of the fuzzy constraint boundary and through analysis of structural reliability, a model of structural fuzzy optimum design is established based on reliability for offshore jacket platforms. According to the characteristics of offshore jacket platforms, the tolerance coefficient of the constraint boundary is determined with the fuzzy optimization method. The optimum level cut set which is the intersection of the fuzzy constraint set and fuzzy objective set, is determined with the bound search method, and then the fuzzy optimum solution to the fuzzy optimization problem is obtained. The central offshore platform SZ36-1 is designed with the fuzzy optimum model based on reliability; the results are compared with those from deterministic optimum design and fuzzy optimum design. The tendency of design variables in the above three methods and its reasons are analyzed. The results of an example show that the fuzzy optimum design based on reliability is stable and reliable. 相似文献
6.
FENG Sheng 《中国海洋工程》2000,14(4):435-445
With the introduction of the design variables of nodal coordinates,which reflect the em-bedded depth of the pile and the jacket bed height,a shape optimum design model for offshore jacket plat-forms is established.A sequential two-level optimum algorithm is developed based on the design variablegradation.On the basis of the finite element method,the sensitivity of the objective function and nodal dis-placement is analyzed.As an example,the BZ281 oil storage offshore platform,which lies in the Bohai oilfield,is designed with the shape optimum model.The results are compared with the cross-section optimumdesign.The tendency of design variables and its reasons in the two methods are analyzed.In the shapeoptimum design,the value of objective function is obviously smaller than that of the initial design and thecross-section optimum design.Therefore,the advantage of structure shape optimum design for jacket plat-forms is remarkable. 相似文献
7.
1 .IntroductionInthe whole service period of the platforms ,some damage is unavoidable due to the corrosion,impact ,fatigue and so on.The damage whould cause the structures’ultimate capacity and safety de-crease .Presently,it is generally acceptedthat the detection of damage involes considerable statisticaluncertainties,thus lot of efforts is made for the damage probalility model ,for example Song and Lu(1996) usedthefuzzy-settheoryto estimatethe humanerrorsthroughthe definitionof inspection… 相似文献
8.
1 .IntroductionTheBohaiGulfisinfestedbyiceinthewholewinter,andoffshorestructuresthereexperiencenotonlywind ,waves ,currentsandearthquake ,butalsoiceloadswhicharecomplicatedbecauseofthedynamicinteractionbetweenicesheetsandstructures.Duanetal.( 2 0 0 0 )hadacomprehensivere viewofthelatestadvancesonice inducedvibration ,fatigueandfractureofoffshorestructures ,payingmuchattentiontothedifferencesinicebreakingmodeanddynamicsofstructuresindifferentice in festedwaters .Theypresentedcriticallythelates… 相似文献
9.
10.
An obvious motivation of this paper is to examine the effectiveness of the lateral vibration control of a jacket type offshore platform with an AMD control device, in conjunction with H2 control algorithm, which is an optimal frequency domain control method based on minimization of H2 norm of the system transfer function. In this study, the offshore platform is modeled numerically by use of the finite element method, instead of a lumped mass model. This structural model is later simplified to be single-degree-of-freedom (SDOF) system by extracting the first vibration mode of the structure. The corresponding "generalized" wave force is determined based on an analytical approximation of the first mode shape function, the physical wave loading being calculated from the linearized Morison equation. This approach facilitates the filter design for the generalized force. Furthermore, the present paper also intends to make numerical comparison between H2 active control and the corresponding passive control using a T 相似文献
11.
Xia Yongnian Senior Engineer Technical Research Institute for Sea-Going Ships China Classification Society 《中国海洋工程》1992,(1)
Fatigue design method is usually used for estimating whether a platform structure meets the requirements of fatigue resistance. It is described in API RP-2A and ZC rules for fixed offshore platforms, in which the allowable stresses for fatigue design are defined. In this paper discussed are the allowable stresses related factors, such as wave climate, structural response, fatigue behaviour of structural members. 相似文献
12.
当结构物产生损伤时,结构的动力特性会发生变化,从而引起结构振动响应产生相应的变化。小波变换是奇异性信号的良好检测工具,可以用于识别结构损伤的发生。建立了某海洋平台有限元模型,得到了随机海浪作用下不同损伤工况的结构振动响应。基于小波变换损伤检测,针对不同类型杆件损伤、不同位置杆件损伤、不同程度的噪声污染以及不同方向振动响应信号情况下,分别研究了海洋平台结构的损伤检测问题,得到了一些有用的结论。 相似文献
13.
Identification of modal parameters of a linear structure with output-only measurements has received much attention over the past decodes. In the paper, the Natural Excitation Technique (NEXT) is used for acquisition of the impulse signals from the structural responses. Then Eigensystem Realization Algorithm (ERA) is utilized for modal identification.For disregarding the fictitious ‘computational modes’, a procedure, Statistically Averaging Modal Frequency Method (SAMFM), is developed to distinguish the true modes from noise modes, and to improve the precision of the identified modal frequencies of the structure. An offshore platform is modeled with the finite element method. The theoretical modal parameters are obtained for a comparison with the identified values. The dynamic responses of the platform under random wave loading are computed for providing the output signals used for identification with ERA. Results of simulation demonstrate that the proposed method can determine the system modal frequency with high precision. 相似文献
14.
15.
Song Yupu Wang Jian Associate Professor Dept. of Civil Engineering Dalian University of Technology Dalian Lecturer Dept. of Civil Engineering Dalian University of Technology Dalian 《中国海洋工程》1992,(1)
A design method of reinforced concrete (R. C.) offshore platforms with nonlinear finite element analysis is proposed. According to the method, a computer program is developed. In this program nonlinear constitutive relationships and strength criteria of concrete and steel bars are included, and the progressive cracking and crushing of the concrete are taken into account. Based on the stress distribution obtained by the nonlinear finite element analysis, the amount of reinforcement in the control sections can be computed and adjusted automatically by the program to satisfy the requirement of the design. The amount of reinforcement required in the control sections, which are obtained with the nonlinear finite element analysis, is agreeable to that obtained in the experiment. This shows that the design method of R. C. offshore platform with the nonlinear finite element method proposed by the authors is reliable for practical use. 相似文献
16.
1 .IntroductionThe structural design method has evolvedfromthe workingstress method,damage stage methodtolimit state method.The more recent probabilisticlimit state design method,whichis based onreliabili-tytheory,has beengenerallyacceptedinthe designcode… 相似文献
17.
传感器优化配置的修正逐步累积法 总被引:1,自引:0,他引:1
讨论了模态实验中传感器的配置问题。利用结构振型矩阵转置的 QR分解得到传感器的初始配置。以模态置信度 MAC矩阵的最大非对角元为目标函数 ,利用本文提出的修正逐步累积法得到传感器的配置 ,并提出传感器配置必须结合优化效果和经济性 2方面综合考虑 相似文献
18.
The dynamic response of offshore platforms is more serious in hostile sea environment than inshallow sea.In this paper,a hybrid solution combined with analytical and numerical method is proposedto compute the stochastic response of fixed offshore platforms to random waves,considering wave-struc-ture interaction and non-linear drag force.The simulation program includes two steps:the first step is theeigenanalysis aspects associated the structure and the second step is response estimation based on spectralequations.The eigenanalysis could be done through conventional finite element method conveniently andits natural frequency and mode shapes obtained.In the second part of the process,the solution of theoffshore structural response is obtained by iteration of a series of coupled spectral equations.Consideringthe third-order term in the drag force,the evaluation of the three-fold convolution should be demanded fornonlinear stochastic response analysis.To demonstrate this method,a numerical analysis is carrie 相似文献
19.
1 .Introduction Large civil engineering structures are exposed to various external loads such as earthquakes ,winds ,traffic and wave loads during their lifetime . The structures may become deteriorated and de-graded withtime in an unexpected way, which m… 相似文献
20.
Efficient Approximate Method of Global Reliability Analysis for Offshore Platforms in the Ice Zone 总被引:1,自引:0,他引:1
Ice load is the dominative load in the design of offshore platforms in the ice zone, and the extreme ice load is the key factor that affects the safety of platforms. The present paper studies the statistical properties of the global resistance and the extreme responses of the jacket platforms in Bahai Bay, considering the randomness of ice load, dead load, steel elastic modulus, yield strength and structural member dimensions. Then, based on the above results, an efficient approximate method of the global reliability analysis for the offshore platforms is proposed, which converts the implicit nonlinear performance function in the conventional reliability analysis to linear explicit one. Finally, numerical examples of JZ20-2 MSW, JZ20-2NW and JZ20-2 MUQ offshore jacket platforms in the Bahai Bay demonstrate the satisfying efficiency, accuracy and applicability of the proposed method. 相似文献