Optimum Design for Offshore Platform Structural Reliability

In this paper, the main problems concerning reliability design of offshore platform structure are described and the general steps for the use of Safety Coefficient Method are presented.     

Finite Element Method for Design of Reinforced Concrete Offshore Platforms

A design method of reinforced concrete (R. C.) offshore platforms with nonlinear finite element analysis is proposed. According to the method, a computer program is developed. In this program nonlinear constitutive relationships and strength criteria of concrete and steel bars are included, and the progressive cracking and crushing of the concrete are taken into account. Based on the stress distribution obtained by the nonlinear finite element analysis, the amount of reinforcement in the control sections can be computed and adjusted automatically by the program to satisfy the requirement of the design. The amount of reinforcement required in the control sections, which are obtained with the nonlinear finite element analysis, is agreeable to that obtained in the experiment. This shows that the design method of R. C. offshore platform with the nonlinear finite element method proposed by the authors is reliable for practical use.     

NP6-1井PDC钻头断落处理与认识

随着PDC钻头的广泛使用,因PDC钻头选型与钻遇地层的不匹配,或PDC钻头本身质量问题,也遇到一些井下复杂情况。此文介绍NP6-1井在311．2mm井段使用PDC钻头钻至井深2878．76m时,PDC钻头从公扣根部折断留在井底,加工公锥和采取适当措施成功地打捞出落鱼,避免侧钻,挽回了经济损失。该井成功打捞出PDC钻头,为同类型的井下落鱼或小落鱼提供参考与借鉴。     

冰激振动下简易平台的动态优化设计

简易平台是边际油田开发的主要结构形式,由于平台结构形式简单,受到动力荷载作用响应比较大。采用动态设计可以合理优化平台结构形式,达到降低平台动力响应的效果。文中以JZ20-2NW简易平台为原型,运用ANSYS有限元分析软件对其进行冰激振动下的动态优化设计。结果表明,动态设计减振效果明显,可供设计人员参考。     

Reliability-Based Full-Life Cycle Optimum Design of Offshore Jacket Platform

Based on the consideration of operation environment and structural property, an optimnm design model of offshore jacket platform is developed in this paper, namely, the reliability-based full-life cycle optimum design model. In this model, the time-dependent reliability assessment method for structural members is established by combination of the decrease, of sectional size and performance deterioration of material. The initial investment, maintenance cost and failure loss cost are assembled into the model. The total cost of the platform structure system in its full service period is chosen as the objective function, and the initial reliabilities of the layer elements partitioned in advance are taken as the design variables. Different models are obtained, depending on whether the system reliability eonstraint is considered or not. This optimum design model can result in the lowest full-life cost and the optimal initial layer reliability of an offshore jacket platform in the design of marine structures. The feasibility of this model is illustrated with an actual jacket platform in the Liaodong Gulf as an example.     

Analysis of Collision Protection for Ocean and Offshore Structures

1 .Introduction Many accidents of ocean and offshore structuresinvolve impact loadings .Some famous ship colli-sion cases arethe Tj rn Bridge (Sweden) ,the West Bridge of the Great Belt Link (Denmark) andtheMaracaibo Bridge (Venezuela) . Most studies usedthe Hertzian contact law(Zukaset al .,1982) tocalculate the impact force and analyze structures subjectedtoimpact loadings .Other alternative meth-ods such as the spring-dashpot and momentumbalance methods utilizedthe coefficient of rest…     

Optimum Design of Structure Shape for Offshore Jacket Platforms

With the introduction of the design variables of nodal coordinates,which reflect the em-bedded depth of the pile and the jacket bed height,a shape optimum design model for offshore jacket plat-forms is established.A sequential two-level optimum algorithm is developed based on the design variablegradation.On the basis of the finite element method,the sensitivity of the objective function and nodal dis-placement is analyzed.As an example,the BZ281 oil storage offshore platform,which lies in the Bohai oilfield,is designed with the shape optimum model.The results are compared with the cross-section optimumdesign.The tendency of design variables and its reasons in the two methods are analyzed.In the shapeoptimum design,the value of objective function is obviously smaller than that of the initial design and thecross-section optimum design.Therefore,the advantage of structure shape optimum design for jacket plat-forms is remarkable.     

Reliability-Based Optimum Design of a Simple Offshore Platform Based on Genetic Algorithms

In this paper,the problem of reliability-based optimal design of simple offshore platform isstudied,and a nonlinear fatigue damage model based on damage mechanics and genetic algorithms areused in the fatigue reliability optimum design of the structure under stochastic wave load.The fatigue dam-age model and the yield failure reliability analyzing model are used in the paper.The reliability of the mod-els and the effectiveness of genetic algorithm are shown by the results of optimum design.     

Fuzzy Optimum Model of Semi-Structural Decision for Lectotype Optimization of Offshore Platforms

In the process of concept design of offshore platforms, it is necessary to select the best from feasible alternatives through comparison and filter. The criterion set, used to evaluate and select the satisfying alternative, consists of many qualitative and quantitative factors. Therefore, the selection is a problem of multicriteria and semi- structural decision- making. Different from traditional methods in semi- structural decision- making, a new framework and methodology is presented in this paper for evaluation of offshore platform alternatives. First, the criterion set is established for the evaluation of alternatives. Next, the approach is studied to construct the relative membership degree matrix, in which both qualitative and quantitative factors are consistent with the uniform calculating standard. And then a new weight-assessing method is developed for calculation of the weights based on the relative membership degree matrix. Finally, a multi-hierarchy fuzzy optimum model is adopted to select t     

Finite Element Analysis of Deformed Legs of Offshore Platform Structures

The element stiffness matrix of the equivalent beam or pipe element of the deformed leg of the platform is derived by the finite element method. The stresses and displacements of some damaged components are calculated, and the numeri-cal solutions agree well with those obtained by the fine mesh finite element method. Finally, as an application of this method, the stresses of some platform structures are calculated and analyzed.     

Model Simplification and Parameter Modification for Offshore Platforms Using Experiment Data

- In this paper, a computation method has been developed so as to compare the finite element method (FEM) with the test results directly. The structure is divided into the "master" and "slave" degrees of freedom. The simplified model can be obtained with modal reduction. Then the design sensitivity analysis of the eigenvalues and eigenvectors has been carried out using the modal frequency and modal shape of the test. A two-story frame structure and a jacket model structure have been calculated. Meanwhile, the modified coefficient, the FEM computational and experimental values have been given. It has been shown that the FEM model modified using the test modal value is efficient.     

Investigation of Allowable Stresses for Fatigue Design of Fixed Offshore Platforms

Fatigue design method is usually used for estimating whether a platform structure meets the requirements of fatigue resistance. It is described in API RP-2A and ZC rules for fixed offshore platforms, in which the allowable stresses for fatigue design are defined. In this paper discussed are the allowable stresses related factors, such as wave climate, structural response, fatigue behaviour of structural members.     

正压冲固平台结构分析中基础边界条件的影响

正压冲固平台是一种采用短桩加固基础的新型海洋采油平台,对于这种新型的平台结构,在结构分析和构件强度校核中必须考虑其有限元模型的基础边界条件处理问题。本文提出了正压冲固平台有限元计算模型中基础边界条件的一种简化方法,将两个水平方向的扭转自由度简化为扭转弹簧边界元,其余自由度简化为固定约束。通过计算分析得到了不同的边界约束刚度系数的取值对平台总体位移和强度校核应力的影响及变化趋势。结论是,平台结构对约束刚度系数K的反应在10^4～10^4之间时比较明显,对K的敏感度最为强烈：在此范围之外,平台反应分别接近于简支约束情况和刚性约束情况。尤其对于接近约束边界的单元,其应力变化最敏感。     

A Model for Loadout Analysis and Its Programming Implementation

- In this paper, the authors use the finite element method to conduct a special static analysis for the loadout procedure of offshore structures. By introducing a variable Xmove (the distance between the relative coordinate system fixed in the moving upper structure and the absolute coordinate system fixed on slideway), adopting substructure to treat the upper structure, and using the elastic foundation beam to model the slideway, the model for the analysis of the loadoul procedure is established. On the basis of this model, DASOS-J loadout program, a program system for the static analysis of loadout offshore structures, is also developed.     

Optimum Environmental Load Design Criterion for Marine Structures Based on Investment and Benefit Analysis

Marine structures operating in natural ocean environment are subjected to various stochasticloads.For design of the marine structures,the most important task is to determine environmental load de-sign criterion.This paper presents a method to determine the optimum environmental load design criteri-on for marine structures.This method is based on the investment and benefit analysis and it can reach thedesign purpose of decreasing total costs during the service life of the structures and increasing economicbenefits.     

The Optimal Design of TMD for Offshore Structures

This paper presents the optimal design procedure of Tuned Mass Damper(TMD)for re-ducing vibration of an actual steel jacket offshore platform excited by random wave loading.In this study,a frequency domain is taken.The force on the structure is determined by use of the linearized Morisonequation for an input Power Spectral Density(PSD)of wave elevation.The sensitivity of optimum valuesof TMD to characteristic parameters of random wave spectrum is analyzed.An optimized TMD designfor the modeled platform is given based on design conditions and the findings of the study.     

Reliability Analysis of Ice-Induced Fatigue and Damage in Offshore Engineering Structures

—In Bohai Gulf,offshore and other installations have collapsed by sea ice due to the fatigueand fracture of the main supporting components in the ice environments.In this paper presented are someresults on fatigue reliability of these structures in the Gulf by investigating the distributions of iceparameters such as its floating direction and speed,sheet thickness,compressive strength,ice forces on thestructures,and hot spot stress in the structure.The low temperature,ice breaking modes and componentfatigue failure modes are also taken into account in the analysis of the fatigue reliability of the offshorestructures experiencing both random ice loading and low temperatures.The results could be applied to thedesign and operation of offshore platforms in the Bohai Gulf.     

海上桶形基础平台负压沉贯渗流场有限元分析

讨论了浅海桶形基础平台负压沉贯渗流场有限元分析方法.通过模型实验结果与有限元分析结果的对比,验证有限元法的可靠性.将有限元法用于桶形基础平台负压沉贯渗流场的计算,得到沉贯过程中许用负压随插深的变化,用于指导平台就位施工时的负压控制.不同插深时,相应许用负压下的桶内、外壁渗流水头和水头梯度分布的计算结果,用于沉贯阻力的计算.     

Equivalent Simplifying of Tower Structure and Its Application in Overall Analysis of Offshore Platform

Based on some mechanical principles, this paper presents a new way for simplifying the tower structure on the platform, i. e., substituting the three-dimensional tower structure by using beam elements. For the overall analysis of offshore platform, this method can not only save man- power and computer time, but also get better results. This paper introduces the equivalent-simplifying method and its application in engineering.     

海洋电缆弯曲加强器参数化设计与分析

为建立海洋电缆弯曲加强器参数化设计方法,使用有限元模型进行了弯曲加强器设计参数研究.基于海缆及其弯曲加强器的几何结构及受力特点,建立了基于多相耦合梁单元的平面有限元模型,可以计算并分析海缆及其弯曲加强器在一定角度的张力作用下的形变与等效应力分布.通过多个案例系统性地分析了弯曲加强器的主要设计参数,即根部直径、锥体段长度及材料弹性模量,对海缆弯曲挠度、曲率及等效应力分布的影响.文中原创性地提出了弯曲加强器组合设计参数φ(t,L,E).通过定量分析确定了其与海缆最大曲率之间的近似线性关系,并由此设计了参数化的弯曲加强器设计流程.通过设计实例验证了组合参数与海缆最大曲率之间关系的准确性和参数化设计流程的有效性.