预制钢筋混凝土剪力墙结构抗震性能研究进展（Ⅱ）：结构性能研究

阐述了预制钢筋混凝土剪力墙结构抗震性能研究的重要性和预制钢筋混凝土剪力墙结构抗震性能研究的最新进展。综述了国内外预制钢筋混凝土剪力墙结构设计规范以及设计方法的研究进展。指出常规预制装配式钢筋混凝土剪力墙结构的抗震性能较差,在地震作用下,主要靠结构构件连接处的损伤和结构构件损坏来消耗能量;无粘结后张拉预应力预制混凝土剪力墙结构,在地震作用下具有自恢复中心能力和良好的抗震能力,但该结构体系的耗能能力不足。认为在预制钢筋混凝土剪力墙结构中设置耗能减震元件,或将预制钢筋混凝土剪力墙结构设计成隔震结构,将有效提高预制钢筋混凝土剪力墙结构的抗震性能。该类预制装配式剪力墙结构的抗震性能有待于进一步研究。     

HRB500级钢筋网轻骨料混凝土剪力墙抗震性能研究

我国混凝土结构工程中目前应用的非预应力钢筋强度为300~400MPa,比发达国家低1~2个等级,结构材料用量偏大,消耗了过多的资源和能源。通过拟静力试验,对两片HRB500级钢筋网轻骨料混凝剪力墙分别进行了在低周期反复荷载作用下受力性能的研究,观测了墙体的整个破坏过程,分析了墙体的强度、底部剪切变形和抗震性能。试验及分析表明,剪力墙具有较大的延性和耗能能力,为HRB500级钢筋用作抗震剪力墙的分布筋提供了试验依据。     

预制预应力混凝土拼装框架梁柱节点抗震性能研究

针对采用预应力钢筋进行干式连接的预制预应力混凝土拼装框架梁柱节点进行抗震性能研究。设计制作了一组节点试件,对其进行低周往复加载试验和数值分析,观测节点变形与破坏特征,得到试件梁端力-位移滞回曲线,分析节点承载力、耗能水平与变形能力。结果表明：通过接缝开合可在较小位移下控制构件的损伤程度,破坏模式以柱端牛腿压剪破坏为主;与现浇混凝土梁柱节点相比,该节点具有良好的变形能力和自复位特征,但是节点整体耗能能力较低;采用简化的基于多折线骨架曲线的本构模型可以对节点的力学性能进行简化等效模拟。     

应用ANSYS对夹层橡胶垫耗能低剪力墙结构的性能分析

本文针对低剪力墙结构延性差、耗能能力差、结构抗震性能差等问题，提出一种新型耗能低剪力墙结构，并应用有限元分析软件ANSYS对同截面整体墙结构及耗能墙结构进行了数值模拟计算，并对其破坏形态、耗能能力、承载力情况、变形性能等进行了对比分析。结果表明，夹层橡胶垫耗能低剪力墙结构具有良好的延性和抗震性能。     

装配式单排配筋再生混凝土中高剪力墙抗震性能研究

提出了新型构造的半装配式、全装配式单排配筋再生混凝土剪力墙,为研究其中高剪力墙的抗震性能,进行了2个半装配式、1个全装配式和1个全现浇单排配筋再生混凝土中高剪力墙试件的低周反复荷载试验,对比分析了各试件的破坏形态、滞回特性、承载力、延性、刚度退化、耗能能力及钢筋应变。结果表明:半装配式单排配筋中高剪力墙与全现浇剪力墙相比,承载力接近,滞回曲线均较饱满,耗能能力相差不大;全装配式试件与半装配式试件相比,承载力低,延性和抗震耗能能力差;随着轴压比的增大,半装配式剪力墙的承载力、耗能能力明显提高。     

装配式人工消能塑性铰框架-摇摆墙抗震性能研究

为提高装配式钢筋混凝土(RC)框架结构的抗震性能,并针对震后梁、柱构件损伤严重等问题,提出一种基于人工塑性消能铰的装配式混凝土框架-摇摆墙结构。人工消能塑性铰即梁、柱构件在梁端采用机械铰及附加耗能钢板连接的构造,基于该构造的框架结合底部铰接的剪力墙,形成人工消能塑性铰框架-摇摆墙结构。使用OpenSEES软件建立了人工消能塑性铰框架-摇摆墙模型及2组对比模型,选用24条天然地震波对3组结构模型进行双向地震响应分析,结果表明:人工消能塑性铰框架-摇摆墙结构可通过摇摆墙的构造,提升结构竖向连续刚度,使结构层间变形均匀,实现完全梁铰的理想屈服机制;在整体可控的变形模式下充分利用人工消能塑性铰滞回耗能,有效减小结构地震响应。     

填充粘弹性材料的开缝钢筋混凝土剪力墙性能试验研究

建立了填充粘弹性材料的开缝钢筋混凝土剪力墙的力学模型,基于通用有限元软件ABAQU S,对具有不同形式的钢筋混凝土剪力墙进行了数值模拟,通过对其在相同加载速率下的弹塑性分析,探讨了开缝填充粘弹性材料的剪力墙和整体墙、开缝墙的性能,以及粘弹性材料缝的尺寸等因素对剪力墙性能的影响。试验结果表明,开缝后填充粘弹性材料,在剪力墙承载力降低不大的前提下,很好地提高了墙体的延性与耗能能力,性能优于其他2种形式的剪力墙,并且剪力墙的承载力和延性受粘弹性材料竖缝的长度的影响较大,而受开缝宽度的影响则很小。     

钢管混凝土柱带钢板耗能键组合剪力墙抗震研究

提出了连排钢管混凝土柱带钢板耗能键组合剪力墙,它由钢管混凝土连排柱、柱间钢板耗能键、钢板耗能键外包混凝土条带三种单元组合而成。进行了4个不同设计参数试件的低周反复荷载试验研究。分析了各试件的承载力、刚度及其退化过程、滞回特性、延性和破坏特征,探讨了分灾耗能机制。研究表明:连排钢管混凝土柱带钢板耗能键组合剪力墙,承载力较大,后期刚度较稳定;混凝土条带在开裂与闭合过程中消耗地震能量,钢板耗能键通过弯剪变形消耗地震能量,钢管与混凝土条带共同工作协同耗能,具有良好的抗震耗能机制;这种新型组合剪力墙具有较强综合抗震耗能能力。     

CFRP加固一字形竖缝耗能预制剪力墙抗震性能研究

以一字形竖缝耗能预制剪力墙作为研究对象,设计了3个装配式剪力墙试件及1个现浇剪力墙对比试件,进行低周往复荷载试验,并对破坏墙体进行CFRP加固,再次进行拟静力试验。试件变化参数包括轴压比、混凝土强度等级及配筋率,对比分析加固前后试件滞回性能、刚度退化、承载力和耗能能力等性能。试验结果表明,与现浇剪力墙相比,一字形竖缝耗能预制剪力墙工作性能良好,阻尼器屈服耗能提高了试件整体工作性能;CFRP加固可有效抑制墙体斜裂缝的发展,对墙体承载力及耗能能力均有显著改善作用;各试件均满足剪力墙弹塑性层间位移角限值要求,延性较好;试件整体表现出良好的抗震性能。     

全装配式预制混凝土结构梁柱组合件抗震性能试验研究

采用足尺模型对比试验方法对现浇高强混凝土梁柱组合件、预制混凝土结构高强混凝土后浇整体式梁柱组合件和高强预制混凝土结构全装配式梁柱组合件在低周反复荷载作用下的开裂破坏形态、滞回特性、骨架曲线、强度与刚度退化特性、耗能能力、节点核心区域的剪切变形、梁端与柱端的转动变形等抗震性能指标进行了系统研究。结果表明：高强预制混凝土结构后浇整体式梁柱组合件与现浇高强混凝土结构梁柱组合件具有相同的抗震能力，全装配式预制混凝土梁柱组合件的抗震性能和主要抗震性能指标与现浇高强混凝土梁柱组合件和预制混凝土结构后浇整体式梁柱组合件存在明显的差异。对于实际工程应用，应采取必要措施增加全装配式节点的耗能能力。     

Shake-table testing of a self-centering precast reinforced concrete frame with shear walls

The seismic performance of a self-centering precast reinforced concrete (RC) frame with shear walls was investigated in this paper. The lateral force resistance was provided by self-centering precast RC shear walls (SPCW), which utilize a combination of unbonded prestressed post-tensioned (PT) tendons and mild steel reinforcing bars for flexural resistance across base joints. The structures concentrated deformations at the bottom joints and the unbonded PT tendons provided the self-centering restoring force. A 1/3-scale model of a five-story self-centering RC frame with shear walls was designed and tested on a shake-table under a series of bi-directional earthquake excitations with increasing intensity. The acceleration response, roof displacement, inter-story drifts, residual drifts, shear force ratios, hysteresis curves, and local behaviour of the test specimen were analysed and evaluated. The results demonstrated that seismic performance of the test specimen was satisfactory in the plane of the shear wall; however, the structure sustained inter-story drift levels up to 2.45%. Negligible residual drifts were recorded after all applied earthquake excitations. Based on the shake-table test results, it is feasible to apply and popularize a self-centering precast RC frame with shear walls as a structural system in seismic regions.     

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism. This damage mode results in poor ductility and limited energy dissipation. Continuous components offer alternatives that may avoid such failures. A novel infilled rocking wall frame system is proposed that takes advantage of continuous component and rocking characteristics. Previous studies have investigated similar systems that combine a reinforced concrete frame and a wall with rocking behavior used. However, a large-scale experimental study of a reinforced concrete frame combined with a rocking wall has not been reported. In this study, a seismic performance evaluation of the newly proposed infilled rocking wall frame structure was conducted through quasi-static cyclic testing. Critical joints were designed and verified. Numerical models were established and calibrated to estimate frame shear forces. The results evaluation demonstrate that an infilled rocking wall frame can effectively avoid soft-story mechanisms. Capacity and initial stiffness are greatly improved and self-centering behavior is achieved with the help of the infilled rocking wall. Drift distribution becomes more uniform with height. Concrete cracks and damage occurs in desired areas. The infilled rocking wall frame offers a promising approach to achieving seismic resilience.     

Recent progress of seismic research on tall buildings in China Mainland

As a result of rapid economic growth and urbanization in the past two decades,many tall buildings have been constructed in China Mainland,offering researchers and practitioners an excellent opportunity for research and practice in the field of structural engineering. This paper reviews progress by researchers throughout China Mainland on the seismic research of tall buildings,focusing on three major topics that impact the seismic performance of tall buildings. These are:(1) new types of steel-concrete composite structural members such as steel-concrete composite shear walls and columns,(2) earthquake resilient shear wall structures such as shear walls with replaceable structural components,self-centering shear walls and rocking walls,and(3) performance-based seismic design,including seismic performance index,performance level and design method. The paper concludes by presenting future research needs and directions in this field.     

Single precast concrete rocking walls as earthquake force‐resisting elements

Precast concrete walls with unbonded post‐tensioning provide a simple self‐centering system. Yet, its application in seismic regions is not permitted as it is assumed to have no energy dissipation through a hysteretic mechanism. These walls, however, dissipate energy imparted to them because of the wall impacting the foundation during rocking and limited hysteretic action resulting from concrete nonlinearity. The energy dissipated due to rocking was ignored in previous experimental studies because they were conducted primarily using quasi‐static loading. Relying only on limited energy dissipation, a shake table study was conducted on four single rocking walls (SRWs) using multiple‐level earthquake input motions. All walls generally performed satisfactorily up to the design‐level earthquakes when their performance was assessed in terms of the maximum transient drift, maximum absolute acceleration, and residual drift. However, for the maximum considered earthquakes, the walls experienced peak lateral drifts greater than the permissible limits. Combining the experimental results with an analytical investigation, it is shown that SRWs can be designed as earthquake force‐resisting elements to produce satisfactory performance under design‐level and higher‐intensity earthquake motions. Copyright © 2016 John Wiley & Sons, Ltd.     

型钢混凝土剪力墙抗震性能影响参数研究

型钢混凝土剪力墙是一种广泛应用于高层混合结构中的剪力墙形式。本文采用通用有限元程序ADINA,以边缘构件含钢率为主要参数,对不同剪跨比的几组剪力墙承载力和变形能力进行了分析,并与考虑了剪力墙混凝土等级、轴压比、配筋率和边缘约束指标等参数影响的剪力墙性能进行了比较研究。结果表明,在高层结构中采用较高强度的混凝土是有利的,但剪力墙的轴压比需要严格限制,且墙体配筋率并不是提高其抗震性能的有效手段。在高层混合结构剪力墙中,通过边缘构件设置型钢可有效增加墙体延性,且边缘约束构件的约束指标可取0.32左右。     

Research on seismic performance of shear walls with concrete filled steel tube columns and concealed steel trusses

In order to further improve the seismic performance of RC shear walls, a new composite shear wall with concrete filled steel tube (CFT) columns and concealed steel trusses is proposed. This new shear wall is a double composite shear wall; the first composite being the use of three different force systems, CFT, steel truss and shear wall, and the second the use of two different materials, steel and concrete. Three 1/5 scaled experimental specimens: a traditional RC shear wall, a shear wall with CFT columns, and a shear wall with CFT columns and concealed steel trusses, were tested under cyclic loading and the seismic performance indices of the shear walls were comparatively analyzed. Based on the data from these experiments, a thorough elastic-plastic finite element analysis and parametric analysis of the new shear walls were carried out using ABAQUS software. The finite element results of deformation, stress distribution, and the evolution of cracks in each phase were compared with the experimental results and showed good agreement. A mechanical model was also established for calculating the load-carrying capacity of the new composite shear walls. The results show that this new type of shear wall has improved seismic performance over the other two types of shear walls tested.     

Shaking table experimental study of recycled concrete frame-shear wall structures

In this study, four 1/5 scaled shaking table tests were conducted to investigate the seismic performance of recycled concrete frame-shear wall structures with different recycled aggregates replacement rates and concealed bracing detail. The four tested structures included one normal concrete model, one recycled coarse aggregate concrete model, and two recycled coarse and fi ne aggregate concrete models with or without concealed bracings inside the shear walls. The dynamic characteristics, dynamic response and failure mode of each model were compared and analyzed. Finite element models were also developed and nonlinear time-history response analysis was conducted. The test and analysis results show that the seismic performance of the recycled coarse aggregate concrete frame-shear wall structure is slightly worse than the normal concrete structure. The seismic resistance capacity of the recycled concrete frame-shear wall structure can be greatly improved by setting up concealed bracings inside the walls. With appropriate design, the recycled coarse aggregate concrete frame-shear wall structure and recycled concrete structure with concealed bracings inside the walls can be applied in buildings.     

Linear‐elastic lateral load analysis and seismic design of pin‐supported wall‐frame structures with yielding dampers

This paper describes an analytical investigation on a reinforced concrete lateral load resisting structural system comprising a pin‐supported (base‐rocking) shear wall coupled with a moment frame on 1 or both sides of the wall. Yielding dampers are used to provide supplemental energy dissipation through the relative displacements at the vertical connections between the wall and the frames. The study extends a previous linear‐elastic model for pin‐supported wall‐frame structures by including the effects of the dampers. A closed‐form solution of the lateral load behavior of the structure is derived by approximating the discrete wall‐frame‐damper interactions with distributed (ie, continuous) properties. The validity of the model is verified by comparing the closed‐form results with computational models using OpenSees program. Then, a parametric analysis is conducted to investigate the effects of the wall, frame, and damper stiffness on the behavior of the structure. It is found that the damper stiffness significantly affects the distribution of shear forces and bending moments over the wall height. Finally, the performance‐based plastic design approach extended to the wall‐frame‐damper system is proposed. Case studies are carried out to design 2 damped pin‐supported wall‐frame structures using the proposed approach. Nonlinear dynamic time‐history analyses are conducted to verify the effectiveness of this method. Results indicate that the designed structures can achieve the performance level with the story drift ratios less than target values, and weak‐story failure mechanism is not observed. The approach can be used in engineering applications.     

型钢混凝土剪力墙的抗震性能研究

型钢混凝土剪力墙(亦称为SRC剪力墙)是一种新型的剪力墙,其抗弯承载力、抗剪承载力及延性均好于普通剪力墙。本文简要总结了近年来国内外关于型钢混凝土剪力墙抗震研究的成果。在此基础上,进行了较高轴压比下内藏钢桁架混凝土组合高剪力墙的抗震性能试验研究。试验研究表明,内藏钢桁架的存在明显改善了高轴压比下型钢混凝土高剪力墙的抗震性能。