A model for moisture and heat flow in fractured unsaturated porous media

The present study investigates propagation of a cohesive crack in non‐isothermal unsaturated porous medium under mode I conditions. Basic points of skeleton deformation, moisture, and heat transfer for unsaturated porous medium are presented. Boundary conditions on the crack surface that consist of mechanical interaction of the crack and the porous medium, water, and heat flows through the crack are taken into consideration. For spatial discretization, the extended finite element method is used. This method uses enriched shape functions in addition to ordinary shape functions for approximation of displacement, pressure, and temperature fields. The Heaviside step function and the distance function are exploited as enrichment functions for representing the crack surfaces displacement and the discontinuous vertical gradients of the pressure and temperature fields along the crack, respectively. For temporal discretization, backward finite difference scheme is applied. Problems solved from the literature show the validity of the model as well as the dependency of structural response on the material properties and loading. Copyright © 2016 John Wiley & Sons, Ltd.     

Multiscale model reduction for shale gas transport in fractured media

In this paper, we develop a multiscale model reduction technique that describes shale gas transport in fractured media. Due to the pore-scale heterogeneities and processes, we use upscaled models to describe the matrix. We follow our previous work (Akkutlu et al. Transp. Porous Media 107(1), 235–260, 2015), where we derived an upscaled model in the form of generalized nonlinear diffusion model to describe the effects of kerogen. To model the interaction between the matrix and the fractures, we use Generalized Multiscale Finite Element Method (Efendiev et al. J. Comput. Phys. 251, 116–135, 2013, 2015). In this approach, the matrix and the fracture interaction is modeled via local multiscale basis functions. In Efendiev et al. (2015), we developed the GMsFEM and applied for linear flows with horizontal or vertical fracture orientations aligned with a Cartesian fine grid. The approach in Efendiev et al. (2015) does not allow handling arbitrary fracture distributions. In this paper, we (1) consider arbitrary fracture distributions on an unstructured grid; (2) develop GMsFEM for nonlinear flows; and (3) develop online basis function strategies to adaptively improve the convergence. The number of multiscale basis functions in each coarse region represents the degrees of freedom needed to achieve a certain error threshold. Our approach is adaptive in a sense that the multiscale basis functions can be added in the regions of interest. Numerical results for two-dimensional problem are presented to demonstrate the efficiency of proposed approach.     

A finite-volume discretization for deformation of fractured media

Simulating the deformation of fractured media requires the coupling of different models for the deformation of fractures and the formation surrounding them. We consider a cell-centered finite-volume approach, termed the multi-point stress approximation (MPSA) method, which is developed in order to discretize coupled flow and mechanical deformation in the subsurface. Within the MPSA framework, we consider fractures as co-dimension one inclusions in the domain, with the fracture surfaces represented as line pairs in 2D (face pairs in 3D) that displace relative to each other. Fracture deformation is coupled to that of the surrounding domain through internal boundary conditions. This approach is natural within the finite-volume framework, where tractions are defined on surfaces of the grid. The MPSA method is capable of modeling deformation, considering open and closed fractures with complex and nonlinear relationships governing the displacements and tractions at the fracture surfaces. We validate our proposed approach using both problems, for which analytical solutions are available, and more complex benchmark problems, including comparison with a finite-element discretization.     

A vertically resolved model for phytoplankton aggregation

This work presents models of the vertical distribution and flux of phytoplankton aggregates, including changes with time in the distribution of aggregate sizes and sinking speeds. The distribution of sizes is described by two parameters, the mass and number of aggregates, which greatly reduces the computational cost of the models. Simple experiments demonstrate the effects of aggregation on the timing and depth distribution of primary production and export. A more detailed ecological model is applied to sites in the Arabian Sea; it demonstrates that aggregation can be important for deep sedimentation even when its effect on surface concentrations is small, and it presents the difference in timing between settlement of aggregates and fecal pellets.     

A novel finite element double porosity model for multiphase flow through deformable fractured porous media

Based on the theory of double-porosity, a novel mathematical model for multiphase fluid flow in a deforming fractured reservoir is developed. The present formulation, consisting of both the equilibrium and continuity equations, accounts for the significant influence of coupling between fluid flow and solid deformation, usually ignored in the reservoir simulation literature. A Galerkin-based finite element method is applied to discretize the governing equations both in the space and time domain. Throughout the derived set of equations the solid displacements as well as the fluid pressure values are considered as the primary unknowns and may be used to determine other reservoir parameters such as stresses, saturations, etc. The final set of equations represents a highly non-linear system as the elements of the coefficient matrices are updated during each iteration in terms of the independent variables. The model is employed to solve a field scale example where the results are compared to those of ten other uncoupled models. The results illustrate a significantly different behaviour for the case of a reservoir where the impact of coupling is also considered. © 1997 by John Wiley & Sons, Ltd.     

A mixed solution for two-dimensional unsteady flow in fractured porous media

A mixed finite element–boundary element solution for the analysis of two-dimensional flow in porous media composed of rock blocks and discrete fractures is described. The rock blocks are modelled implicitly by using boundary elements whereas finite elements are adopted to model the discrete fractures. The computational procedure has been implemented in a hybrid code which has been validated first by comparing the numerical results with the closed-form solution for flow in a porous aquifer intercepted by a vertical fracture only. Then, a more complex problem has been solved where a pervious, homogeneous and isotropic matrix containing a net of fractures is considered. The results obtained are shown to describe satisfactorily the main features of the flow problem under study. © 1997 by John Wiley & Sons, Ltd.     

Experiment of pumping at constant-head: an alternative possibility to the sustainable yield of a well

The effects of constant-head pumping on a well over a period of 1 year have been monitored and the results used in the research of a potential alternative for the attainment of sustainable yield. Sustainable yield is frequently related to the response of drawdown during a pumping test at constant-rate, which sometimes involves a difficult choice of conceptual model to be used to analyse the pumping results. The experiment, carried out on a well that taps a fractured aquifer in Italy, recorded the aquifer’s response to pumping, compared with the response of springs. From the trends in discharge variation with time, the period and magnitude of the recharge and the stored water volume at the beginning of the depletion period can be evaluated, and the discharge rate during the same depletion period can be predicted. A sustainable yield can be derived based on the water volume extracted during the depletion period rather than on the prediction of drawdown over a long time. The experiment also highlights the stability of water quality extracted from the well, and where this criterion is important, in some cases, the constant-head pumping can represent an alternative method of groundwater exploitation.     

Hydromechanical behavior during constant-rate pumping tests in fractured gneiss

Deformation and fluid pressure during constant-rate pumping tests were characterized by sensitivity analyses using a theoretical model of a deformable fracture, and by conducting and analyzing field tests at a site underlain by fractured biotite gneiss in western South Carolina, USA. The sensitivity analysis indicates that displacement is a hysteretic function of fluid pressure during constant-rate pumping tests, and the signals are affected by properties of the fracture (normal stiffness, aperture, and heterogeneities in the fracture plane) and enveloping rock (elastic modulus and permeability). The field tests used a removable borehole extensometer to measure axial displacements in the pumping well. The field results are generally similar to simulations, and the hydraulic and mechanical properties obtained by inversion of the pumping test results are essentially the same as results from hydromechanical slug tests. The observed displacements early in the pumping tests are less than, whereas late in the test they are greater than predicted values assuming a uniform fracture. This difference can be explained as a consequence of preferential flow within the fracture. These results indicate that displacements in a wellbore are sensitive to details of fracture connectivity and preferential flow that are difficult to detect through the pressure signal alone.     

A finite element method for modeling coupled flow and deformation in porous fractured media

Modeling the flow in highly fractured porous media by finite element method (FEM) has met two difficulties: mesh generation for fractured domains and a rigorous formulation of the flow problem accounting for fracture/matrix, fracture/fracture, and fracture/boundary fluid mass exchanges. Based on the recent theoretical progress for mass balance conditions in multifractured porous bodies, the governing equations for coupled flow and deformation in these bodies are first established in this paper. A weak formulation for this problem is then established allowing to build a FEM. Taking benefit from recent development of mesh‐generating tools for fractured media, this weak formulation has been implemented in a numerical code and applied to some typical problems of hydromechanical coupling in fractured porous media. It is shown that in this way, the FEM that has proved its efficiency to model hydromechanical phenomena in porous media is extended with all its performances (calculation time, couplings, and nonlinearities) to fractured porous media. Copyright © 2015 John Wiley & Sons, Ltd.     

模拟裂隙多孔介质中变饱和渗流的广义等效连续体方法

描述了一种计算裂隙多孔介质中变饱和渗流的广义等效连续体方法。这种方法忽略裂隙的毛细作用,设定一个与某孔隙饱和度相对应的综合饱和度极限值,并假定：（1）如果裂隙多孔介质的综合饱和度小于该极限值,水只在孔隙中存在并流动,而裂隙中则没有水的流动;（2）如果综合饱和度等于或大于该极限值,水将进入裂隙,并在裂隙内运动。分析比较了等效连续体模型的不同计算方法,并给出了一个模拟裂隙岩体中变饱和渗流与传热耦合问题的应用算例。结果表明,所述方法具有一般性,可以有效地模拟裂隙多孔介质中变饱和渗流的基本特征。     

A Winkler model approach for vertically and laterally loaded piles in nonhomogeneous soil

An investigation is made to present analytical solutions provided by a Winkler model approach for the analysis of single piles and pile groups subjected to vertical and lateral loads in nonhomogeneous soils. The load transfer parameter of a single pile in nonhomogeneous soils is derived from the displacement influence factor obtained from Mindlin's solution for an elastic continuum analysis, without using the conventional form of the load transfer parameter adopting the maximum radius of the influence of the pile proposed by Randolph and Wroth. The modulus of the subgrade reaction along the pile in nonhomogeneous soils is expressed by using the displacement influence factor related to Mindlin's equation for an elastic continuum analysis to combine the elastic continuum approach with the subgrade reaction approach. The relationship between settlement and vertical load for a single pile in nonhomogeneous soils is obtained by using the recurrence equation for each layer. Using the modulus of the subgrade reaction represented by the displacement influence factor related to Mindlin's solution for the lateral load, the relationship between horizontal displacement, rotation, moment, and shear force for a single pile subjected to lateral loads in nonhomogeneous soils is available in the form of the recurrence equation. The comparison of the results calculated by the present method for single piles and pile groups in nonhomogeneous soils has shown good agreement with those obtained from the more rigorous finite element and boundary element methods. It is found that the present procedure gives a good prediction on the behavior of piles in nonhomogeneous soils. Copyright © 2011 John Wiley & Sons, Ltd.     

A statistically based numerical model for heat conduction in fractured rock masses

A computational procedure for simulating heat conduction in fractured rock masses is proposed and illustrated within the context of the finite element method. The procedure makes use of simple local models for conduction in the vicinity of a single open fracture. The local models allow effective thermal properties for fractured rock to be expressed in terms of fracture characteristics such as spacing, orientation and aperture. The distributions of fractures and fracture properties within the finiteelement model are derived from a statistical representation of geological field data. The procedure is demonstrated to satisfactorily reproduce heat transfer results across single fractures and provide an efficient means of representing conduction in formations with multiple fractures.     

A lattice type model for particulate media

In this paper, a lattice-type model to simulate the micro-mechanical behaviour of particulate/granular media is presented. In this numerical model, a particulate assembly is simulated as a lattice/truss. Nodes located at contacts between a particle and its neighbours are linked by bars to each other. Each particle is represented by a lattice within its microstructure and particle interact through load transfer at the nodes. Constraints are prescribed at the nodes to describe active, deactivated and reactivated contacts. When a particulate assembly develops into a mechanism (deformation with zero incremental load), further deformation is simulated through a framework that describes the kinematics of the particles (sliding, rolling and rotation of particles). This framework is formed by introducing nodes at the particle centroids and linking them with bars. Bars-linking particles with a non-sliding contact are assigned large stiffnesses relative to bars linking particles with a sliding contact. Numerical tests are conducted on two-dimensional assemblies of disks, arranged as very loose and very dense packing under simple shear loading conditions. The results concord with the results of numerical tests conducted using the discrete element method and with photoelastic experiments. Additionally, the model is applied to study the effects of initial imperfections caused by particles with low elastic modulus. Copyright © 1999 John Wiley & Sons, Ltd.     

裂隙岩体三维柔度张量的数值试验方法

在裂隙岩体二维柔度张量数值试验的基础上,建立了裂隙岩体三维柔度张量及其表征单元体积（REV）尺度研究的简化数值试验方法。首先根据岩体裂隙的统计参数及分布规律,运用蒙特卡罗方法在研究域内获得与实际岩体裂隙同分布的三维随机裂隙网络,提取位于不同方位的岩体试件,运用二维柔度张量的数值试验方法求出各个平面方向上的二维柔度张量,然后根据二维与三维柔度张量的拓扑关系,用数学方法求解裂隙岩体的三维柔度张量。对于含3组正交全贯通裂隙的岩体,通过数值试验获得的柔度张量与理论解相比,其主对角线上各参数的误差在5%以内,表明该数值试验方法较为可靠。最后将此方法运用到小湾水电站工程中,确定左岸坝区裂隙岩体的应力REV为11 m×11 m×11 m,并获得该区域裂隙岩体的三维柔度张量。     

Immiscible two-phase Darcy flow model accounting for vanishing and discontinuous capillary pressures: application to the flow in fractured porous media

Fully implicit time-space discretizations applied to the two-phase Darcy flow problem leads to the systems of nonlinear equations, which are traditionally solved by some variant of Newton’s method. The efficiency of the resulting algorithms heavily depends on the choice of the primary unknowns since Newton’s method is not invariant with respect to a nonlinear change of variable. In this regard, the role of capillary pressure/saturation relation is paramount because the choice of primary unknowns is restricted by its shape. We propose an elegant mathematical framework for two-phase flow in heterogeneous porous media resulting in a family of formulations, which apply to general monotone capillary pressure/saturation relations and handle the saturation jumps at rocktype interfaces. The presented approach is applied to the hybrid dimensional model of two-phase water-gas Darcy flow in fractured porous media for which the fractures are modelled as interfaces of co-dimension one. The problem is discretized using an extension of vertex approximate gradient scheme. As for the phase pressure formulation, the discrete model requires only two unknowns by degree of freedom.     

Semi-empirical equations for the systematic decrease in permeability with depth in porous and fractured media

Permeability loss with depth is a general trend in geological media and plays an essential role in subsurface fluid flow and solute transport. In the near surface zone where groundwater movement is active, the decrease in permeability with depth is dominated by the mechanical compaction of deformable media caused by the increase in lithostatic stress with depth. Instead of using empirical equations from statistical analysis, by considering the well-defined relationships among permeability, porosity, fracture aperture and effective stress under lithostatic conditions, new semi-empirical equations for the systematic depth-dependent permeability are derived, as well as the equations for the depth-dependent porosity in a porous medium and the depth-dependent fracture aperture in a fractured medium. The existing empirical equations can be included in the new equations as special cases under some simplification. These new semi-empirical equations perform better than previous equations to interpret the depth-dependent permeability of the Pierre Shale (with a maximum depth of approximately 4,500 m) and the granite at Stripa, Sweden (with a maximum depth of about 2,500 m).     

裂隙岩体渗流-传热耦合的复合单元模型

基于复合单元法建立了裂隙岩体渗流-传热耦合的复合单元模型。该模型前处理简便快捷,网格剖分不受限制,可依据裂隙的真实信息自动将其离散在单元内。其次,采用交叉迭代算法,对裂隙岩体的渗流场和温度场进行耦合分析,耦合算法不仅考虑了温度对流体运动黏度的影响,而且可计算裂隙中流体与相邻岩块间渗流-传热过程以及两者间的渗流量和热量交换。通过与已有近似解析解相比较,验证了复合单元耦合算法的可靠性。算例分析表明,渗流-传热耦合作用对裂隙岩体的渗流场和温度场均有一定的影响。分析了不同岩块热传导系数和裂隙开度对热能提取效率的影响,结果显示,岩块热传导系数越大、裂隙开度越大,低温流体从高温岩块中吸取的热能会较多,出口处流体温度下降得较快。     

Embedded discontinuity approach for coupled hydromechanical analysis of fractured porous media

In this paper, a new continuum approach for the coupled hydromechanical analysis of fractured porous media is proposed. The methodology for describing the hydraulic characteristics invokes an enriched form of Darcy's law formulated in the presence of an embedded discontinuity. The constitutive relations governing the hydromechanical response are derived by averaging the fluid pressure gradient and the discontinuous displacement fields over a selected referential volume of the material, subject to some physical constraints. The framework incorporates an internal length scale which is explicitly embedded in the definition of gradient operators. The respective field equations are derived following the general form of balance equations in interacting continua. The conventional finite element method is then employed for the spatial discretization, and the generalized Newmark scheme is used for the temporal discretization. The proposed methodology is verified by some numerical examples dealing with a steady-state flow through fractured media as well as a time-dependent consolidation in the presence of a discontinuity.     

FDEM-TH3D: A three-dimensional coupled hydrothermal model for fractured rock

This paper proposes a three-dimensional coupled hydrothermal model for fractured rock based on the finite-discrete element method to simulate fluid flow and heat transport. The 3D coupled hydrothermal model is composed of three main parts: a heat conduction model for the rock matrix, a heat transfer model for the fluid in the fractures (including heat conduction and heat convection), and a heat exchange model between the rock matrix and the fluid in the fractures. Four examples with analytical solutions are provided to verify the model. A heat exchange experiment of circulating water in a cylindrical granite sample with one fracture is simulated. The simulation results agree well with the experimental results. The effects of the fracture aperture, fluid viscosity, and pressure difference on the heat exchange between the fluid and rock are studied. Finally, an application concerned with heat transport and fluid flow in fractured rock is presented. The simulation results indicate that the 3D fully coupled hydrothermal model can capture the fluid flow and temperature evolution of rocks and fluids.     

A finite element porothermoelastic model for dual-porosity media

An existing dual-porosity finite element model has been extended to include thermo-hydro-mechanical coupling in both media. The model relies on overlapping distinct continua for the fluid and solid domains. In addition, conductive and convective heat transfers are incorporated using a single representative thermodynamics continuum. The model is applied to the problem of an inclined borehole drilled in a fractured formation subjected to a three-dimensional state of stress and, a temperature gradient between the drilling fluid and the formation. A sensitivity analysis has been carried out to study the impact of thermal loading, effect of heat transport by pore fluid flow and, the effect of parameters of the secondary medium used to represent the fractures. Copyright © 2004 John Wiley & Sons, Ltd.