Effects of wave passage on the relevant dynamic properties of structures with flexible foundation

An evaluation of the wave passage effects on the relevant dynamic properties of structures with flexible foundation is presented. A simple soil–structure system similar to that used in practice to take into account the inertial interaction effects by the soil flexibility is studied. The kinematic interaction effects due to non‐vertically incident P, SV and Rayleigh waves are accounted for in this model. The effective period and damping of the system are obtained by establishing an equivalence between the interacting system excited by the foundation input motion and a replacement oscillator excited by the free‐field ground motion. In this way, the maximum structural response could be estimated from standard free‐field response spectra using the period and damping of the building modified by both the soil flexibility and the travelling wave effects. Also, an approximate solution for the travelling wave problem is examined over wide ranges of the main parameters involved. Numerical results are computed for a number of soil–structure systems to identify under which conditions the effects of wave passage are important. It comes out that these effects are generally negligible for the system period, but they may significantly change the system damping since the energy dissipation within the soil depends on both the wave radiation and the diffraction and scattering of the incident waves by the foundation. Copyright © 2001 John Wiley & Sons, Ltd.     

Effects of foundation embedment during building–soil interaction

A numerical solution for evaluating the effects of foundation embedment on the effective period and damping and the response of soil–structure systems is presented. A simple system similar to that used in practice to account for inertial interaction effects is investigated, with the inclusion of kinematic interaction effects for the important special case of vertically incident shear waves. The effective period and damping are obtained by establishing an equivalence between the interacting system excited by the foundation input motion and a replacement oscillator excited by the free-field ground motion. In this way, the use of standard free-field response spectra applicable to the effective period and damping of the system is permitted. Also, an approximate solution for total soil–structure interaction is presented, which indicates that the system period is insensitive to kinematic interaction and the system damping may be expressed as that for inertial interaction but modified by a factor due to kinematic interaction. Results involving both kinematic and inertial effects are compared with those obtained for no soil–structure interaction and inertial interaction only. The more important parameters involved are identified and their influences are examined over practical ranges of interest. © 1998 John Wiley & Sons, Ltd.     

Influence of the soil–structure interaction on the fundamental period of buildings

This paper includes an investigation of the influence of the soil–structure interaction (SSI) on the fundamental period of buildings. The behaviour of both the soil and the structure is assumed to be elastic. The soil‐foundation system is modelled using translational and rotational discrete springs. Analysis is first conducted for one‐storey buildings. It shows that the influence of the SSI on the fundamental frequency of building depends on the soil–structure relative rigidity K_ss. Analysis is then extended for multi‐storey buildings. It allows the generalization of the soil–structure relative rigidity K_s to such complex structures. Charts are proposed for taking into account the influence of the SSI in the calculation of the fundamental frequency of a wide range of buildings. Copyright © 2007 John Wiley & Sons, Ltd.     

Stochastic seismic response of multiply-supported secondary systems in flexible-base structures

A formulation has been proposed for the transfer function of a secondary system response while the primary system is supported on a compliant soil and the excitation comprises of translational ground motion at its base. For this purpose, the earlier formulation of the authors for the fixed-base case, which exactly considers the interaction between the two sub-systems and is based on the use of their individual modal properties, has been extended. Also, the concept of modifying the input excitation for the interaction accelerations (associated with the soil–structure interaction) has been used. An example P–S system and three example earthquake excitations have been considered to illustrate the proposed formulation and to estimate the expected response peak amplitudes in the secondary system. This study shows that ‘detuning’ of the tuned systems may occur in case of significant soil–structure interaction. Further, for the reasons of both safety and economy, ignoring the interaction effects in designing the secondary systems may not always be justified. Copyright © 1999 John Wiley & Sons, Ltd.     

Free‐vibration analysis of a three‐dimensional soil–structure system

A procedure which involves a non‐linear eigenvalue problem and is based on the substructure method is proposed for the free‐vibration analysis of a soil–structure system. In this procedure, the structure is modelled by the standard finite element method, while the unbounded soil is modelled by the scaled boundary finite element method. The fundamental frequency, and the corresponding radiation damping ratio as well as the modal shape are obtained by using inverse iteration. The free vibration of a dam–foundation system, a hemispherical cavity and a hemispherical deposit are analysed in detail. The numerical results are compared with available results and are also verified by the Fourier transform of the impulsive response calculated in the time domain by the three‐dimensional soil–structure–wave interaction analysis procedure proposed in our previous paper. The fundamental frequency obtained by the present procedure is very close to that obtained by Touhei and Ohmachi, but the damping ratio and the imaginary part of modal shape are significantly different due to the different definition of damping ratio. This study shows that although the classical mode‐superposition method is not applicable to a soil–structure system due to the frequency dependence of the radiation damping, it is still of interest in earthquake engineering to evaluate the fundamental frequency and the corresponding radiation damping ratio of the soil–structure system. Copyright © 2001 John Wiley & Sons, Ltd.     

Kinematic response of single piles to vertically incident P‐waves

Dynamic response of single piles to seismic waves is fundamentally different from the free‐field motion because of the interaction between the pile and the surrounding soil. Considering soil–pile interaction, this paper presents a new displacement model for the steady‐state kinematic response of single piles to vertically incident P‐waves on the basis of a continuum model. The governing equations and boundary conditions of the two undetermined functions in the model are obtained to be coupled by using Hamilton's principle. Then, the two unknown functions are decoupled and solved by an iterative algorithm numerically. A parametric study is performed to investigate the effects of the properties of the soil–pile system on the kinematic response of single piles. It is shown that the effects of the pile–soil modulus ratio, the slenderness ratio of the pile, and the frequency of the incident excitations are very significant. By contrast, the influence of soil damping on the kinematics of the system is slight and can be neglected. Copyright © 2013 John Wiley & Sons, Ltd.     

Numerical modelling of wave propagation in anisotropic soil using a displacement unit-impulse-response-based formulation of the scaled boundary finite element method

An efficient method for modelling the propagation of elastic waves in unbounded domains is developed. It is applicable to soil–structure interaction problems involving scalar and vector waves, unbounded domains of arbitrary geometry and anisotropic soil. The scaled boundary finite element method is employed to derive a novel equation for the displacement unit-impulse response matrix on the soil–structure interface. The proposed method is based on a piecewise linear approximation of the first derivative of the displacement unit-impulse response matrix and on the introduction of an extrapolation parameter in order to improve the numerical stability. In combination, these two ideas allow for the choice of significantly larger time steps compared to conventional methods, and thus lead to increased efficiency. As the displacement unit-impulse response approaches zero, the convolution integral representing the force–displacement relationship can be truncated. After the truncation the computational effort only increases linearly with time. Thus, a considerable reduction of computational effort is achieved in a time domain analysis. Numerical examples demonstrate the accuracy and high efficiency of the new method for two-dimensional soil–structure interaction problems.     

A time‐domain seismic SSI analysis method for inelastic bridge structures through the use of a frequency‐dependent lumped parameter model

It is highlighted in the past that the soil–structure interaction phenomenon can produce a significant alteration on the response of a bridge structure. A variety of approaches has been developed in the past, which is capable of tackling the soil–structure interaction problem from different perspectives. The popular approach of a discretized truncated finite element model of the soil domain is not always a numerically viable solution, especially for computationally demanding simulations such as the probabilistic fragility analysis of a bridge structure or the real time hybrid simulation. This paper aims to develop a complete modeling procedure that is capable of coping with the soil–structure interaction problem of inelastic bridge structures through the use of a frequency dependent lumped parameter assembly. The proposed procedure encounters accuracy and global stability issues observed on past methods while maintaining the broad applicability of the method by any commercial FEM software. A case study of an overpass bridge structure under earthquake excitations is illustrated in order to verify the proposed method. Copyright © 2015 John Wiley & Sons, Ltd.     

Soil–structure interaction for a SDOF oscillator supported by a flexible foundation embedded in a half-space: Closed-form solution for incident plane SH-waves

A closed-form analytical solution is presented for the dynamic response of a SDOF oscillator, supported by a flexible foundation embedded in an elastic half-space, and excited by plane SH waves. The solution is obtained by the wave function expansion method. The solution is verified for the special case of a rigid foundation by comparison with published results. The model is used to investigate the effect of the foundation flexibility on the system response. The results show that the effect is significant for both foundation response and structural relative response. For a system with more flexible foundation, the radiation damping is smaller, the foundation response is larger, especially for obliquely incident waves, while the structural relative response is smaller, and the system frequency shifts towards lower frequencies. This simple model may be helpful to obtain insight into the effects of soil–structure interaction for a slim structure on an extended flexible foundation.     

Non-singular time domain BEM with applications to 3D inertial soil–structure interaction

A direct time domain boundary element method is presented based on the Stokes fundamental solutions, discretized in both time and space, and an efficient time step-by-step solution that minimizes the accumulation of errors. A non-singular numerical integration procedure, in the Cauchy sense, is proposed for the generation of the associated influence matrices. This methodology is shown to be efficient for the solution of a number of computationally intensive problems in the area of soil–structure interaction. In addition, an algorithm for the direct calculation of the response of massive foundations to externally applied forces and/or obliquely incident seismic waves is introduced. The accuracy and computational efficiency of the proposed methodologies is established through a number of comparison studies.     

Bridge–embankment interaction under transverse ground excitation

Seismic performance and dynamic response of bridge–embankments during strong or moderate ground excitations are investigated through finite element (FE) modelling and detailed dynamic analysis. Previous research studies have established that bridge–embankments exhibit increasingly flexible performance under high‐shear deformation levels and that soil displacements at bridge abutment supports may be significant particularly in the transverse direction. The 2D equation of motion is solved for the embankment, in order to evaluate the dynamic characteristics and to describe explicitly the seismic performance and dynamic response under transverse excitations accounting for soil nonlinearities, soil–structure interaction and imposed boundary conditions (BCs). Using the proposed model, equivalent elastic analysis was performed so as to evaluate the dynamic response of approach embankments while accounting for soil–structure interaction. The analytical procedures were applied in the case of a well‐documented bridge with monolithic supports (Painter Street Overcrossing, PSO) which had been instrumented and embankment participation was identified from its response records after the 1971 San Fernando earthquake. The dynamic characteristics and dynamic response of the PSO embankments were evaluated for alternative BCs accounting for soil–structure interaction. Explicit expressions for the evaluation of the critical embankment length L_c are provided in order to quantify soil contribution to the overall bridge system under strong intensity ground excitations. The dynamic response of the entire bridge system (deck–abutments–embankments) was also evaluated through simplified models that considered soil–structure interaction. Results obtained from this analysis are correlated with those of detailed 3D FE models and field data with good agreement. Copyright © 2007 John Wiley & Sons, Ltd.     

A fundamental dual‐zone continuum theory for dynamic soil–structure interaction

A continuum theory for an improved characterization of dynamic soil–structure interaction in the framework of three‐dimensional elastodynamics is presented. Effective in demonstrating the importance of integrating free‐field and near‐field effects under general soil and foundation conditions, a compact two‐zone delineation of the soil medium is proposed as a quintessential mechanics perspective for this class of problems. Sufficient to deliver a practical resolution of some perennial analytical and experimental conflicts, a fundamental formulation commensurate to a gradated unification of the homogenization approach and any sole free‐field inhomogeneous representation is developed and implemented computationally. Specialized to the problem of a rigid circular footing on sand, a nominal set of dynamic contact stress distributions and related impedance functions by the dual‐zone theory is included for theoretical and engineering evaluation. Through its comparison with benchmark analytical solutions and relevant physical measurements, the usage of the underlying conceptual platform as an advanced yet practical foundation for general dynamic soil–structure interaction is illustrated. Copyright © 2010 John Wiley & Sons, Ltd.     

Optimum lateral load pattern for seismic design of elastic shear‐buildings incorporating soil–structure interaction effects

Recently, several new optimum loading patterns have been proposed by researchers for fixed‐base systems while their adequacy for soil–structure systems has not been evaluated yet. Through intensive dynamic analyses of multistory shear‐building models with soil–structure interaction subjected to a group of 21 artificial earthquakes adjusted to soft soil design spectrum, the adequacy of these optimum patterns is investigated. It is concluded that using these patterns the structures generally achieve near optimum performance in some range of periods. However, their efficiency reduces as soil flexibility increases especially when soil–structure interaction effects are significant. In the present paper, using the uniform distribution of damage over the height of structures, as the criterion, an optimization algorithm for seismic design of elastic soil–structure systems is developed. The effects of fundamental period, number of stories, earthquake excitation, soil flexibility, building aspect ratio, damping ratio and damping model on optimum distribution pattern are investigated. On the basis of 30,240 optimum load patterns derived from numerical simulations and nonlinear statistical regression analyses, a new lateral load pattern for elastic soil–structure systems is proposed. It is a function of the fundamental period of the structure, soil flexibility and structural slenderness ratio. It is shown that the seismic performance of such a structure is superior to those designed by code‐compliant or recently proposed patterns by researchers for fixed‐base structures. Using the proposed load pattern in this study, the designed structures experience up to 40% less structural weight as compared with the code‐compliant or optimum patterns developed based on fixed‐base structures. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of soil–structure interaction on the dynamic properties and seismic response of piled structures

This paper presents a simple and stable procedure for the estimation of periods and dampings of piled shear buildings taking soil–structure interaction into account. A substructuring methodology that includes the three-dimensional character of the foundations is used. The structure is analyzed as founded on an elastic homogeneous half-space and excited by vertically incident S waves. The strategies proposed in the literature to estimate the period and damping are revised, and a modified strategy is proposed including crossed impedances and all damping terms. Ready-to-use graphs are presented for the estimation of flexible-base period and damping in terms of their fixed-base values and the system configuration. Maximum shear forces together with base displacement and rocking peak response are also provided. It is shown that cross-coupled impedances and kinematic interaction factors need to be taken into account to obtain accurate results for piled buildings.     

Assessment and modeling of embankment participation in the seismic response of integral abutment bridges

The dynamic response and seismic performance of bridges may be appreciably affected by numerous contributing factors, with soil–structure interaction being the dominant exogenous influence. The most familiar form is the so-called soil–pile interaction, but embankment–abutment interaction is also documented through field observations and analytical investigations, particularly evident in integral R.C. bridges. Recent studies have shown that this form of interaction may significantly alter the bridge response and should be taken into account during design and assessment, especially in the case of typical highway overcrossings that have abutments supported on earth embankments. In light of this emerging problem and in order to facilitate quantitative estimates of the interaction effects, the question of appropriate modeling and seismic assessment of R.C. integral bridges is the main object of the present paper. Based on already established procedures to account for soil–structure interaction, a new approach is proposed to model the contribution of the embankment, the bent and the abutments to the overall bridge response. Furthermore, the capacity curve of the entire bridge system is evaluated through the implementation of Incremental Dynamic Analysis (IDA), therefore allowing for seismic assessment of the complex superstructure–foundation system with well established displacement based procedures. Using as a benchmark case two typical instrumented U.S. highway bridges located in California, the proposed method is implemented and provided results from this analysis are correlated successfully with available field data. Results obtained from the analysis indicate excessive displacement demands for the entire bridge–embankment system owing to the embankment contribution and the soil degradation under increasing shear strains. Furthermore, seismic performance is strongly related to the central bent deformation capacity, with soil–pile interaction effects being of critical importance.     

Rocking vibrations of a rigid circular foundation on poroelastic half-space to elastic waves

A study is carefully conducted for the rocking response of a rigid circular foundation resting on a poroelastic half-space when subjected to seismic waves under the framework of Biot’s theory. The free-field waves, rigid-body scattering field waves and radiation scattering field waves are introduced to consider the complex behavior of the soil owing to the scattering phenomena caused by the existence of the foundation. The contact surface between the soil and the foundation is supposed to be perfectly bonded and fully permeable. Combining with the divided wave fields, two sets of dual integral equations elaborating the mixed boundary-value conditions are established, and then reduced to Fredholm integral equations. Therefore, with a semi-analytical method, the expressions of the rocking displacements are obtained. The numerical results of the rocking vibration of the foundation for incident P, SV and Rayleigh waves are presented. The influences of certain parameters, such as the permeability of the soil, the incident angle, Poisson’s ratio and the mass of the foundation, on the rocking vibration of the foundation are explored and studied. Different reactions are found when the foundation is excited by different waves.     

SH Wave Number Green’s Function for a Layered,Elastic Half-Space. Part I: Theory and Dynamic Canyon Response by the Discrete Wave Number Boundary Element Method

We present a closed-form frequency-wave number (ω – k) Green’s function for a layered, elastic half-space under SH wave propagation. It is shown that for every (ω – k) pair, the fundamental solution exhibits two distinctive features: (1) the original layered system can be reduced to a system composed by the uppermost superficial layer over an equivalent half-space; (2) the fundamental solution can be partitioned into three different fundamental solutions, each one carrying out a different physical interpretation, i.e., an equivalent half-space, source image impact, and dispersive wave effect, respectively. Such an interpretation allows the proper use of analytical and numerical integration schemes, and ensures the correct assessment of Cauchy principal value integrals. Our method is based upon a stiffness-matrix scheme, and as a first approach we assume that observation points and the impulsive SH line-source are spatially located within the uppermost superficial layer. We use a discrete wave number boundary element strategy to test the benefits of our fundamental solution. We benchmark our results against reported solutions for an infinitely long circular canyon subjected to oblique incident SH waves within a homogeneous half-space. Our results show an almost exact agreement with previous studies. We further shed light on the impact of horizontal strata by examining the dynamic response of the circular canyon to oblique incident SH waves under different layered half-space configurations and incident angles. Our results show that modifications in the layering structure manifest by larger peak ground responses, and stronger spatial variability due to interactions of the canyon geometry with trapped Love waves in combination with impedance contrast effects.     

A simple model for structural control including soil–structure interaction effects

A simple model for the seismic response of a one-storey structure subjected to active control in the presence of soil–structure interaction effects is presented. The approach is based on the successive use of equivalent 1-DOF oscillators which account for the effects of control and soil–structure interaction. Simple expressions for these oscillators based on exact analytical solutions of the control equations and approximate solutions of the interaction equations are presented. The study includes an evaluation of the effects of soil–structure interaction on the seismic response of actively controlled structures in which the control gains have been determined with and without inclusion of soil–structure interaction effects. A simple procedure to include the interaction effects on the control gains is also presented. © 1998 John Wiley & Sons, Ltd.     

Seismic soil–structure interaction in multi‐span bridges: Application to a railway bridge

The effects of soil‐structure interaction on the seismic response of multi‐span bridges are investigated by means of a modelling strategy based on the domain decomposition technique. First, the analysis methodology is presented: kinematic interaction analysis is performed in the frequency domain by means of a procedure accounting for radiation damping, soil–pile and pile‐to‐pile interaction; the seismic response of the superstructure is evaluated in the time domain by means of user‐friendly finite element programs introducing suitable lumped parameter models take into account the frequency‐dependent impedances of the soil–foundation system. Second, a real multi‐span railway bridge longitudinally restrained at one abutment is analyzed. The input motion is represented by two sets of real accelerograms: one consistent with the Italian seismic code and the other constituted by five records characterized by different frequency contents. The seismic response of the compliant‐base model is compared with that obtained from a fixed‐base model. Pile stress resultants due to kinematic and inertial interactions are also evaluated. The application demonstrates the importance of performing a comprehensive analysis of the soil–foundation–structure system in the design process, in order to capture the effects of soil‐structure interaction in each structural element that may be beneficial or detrimental. Copyright © 2011 John Wiley & Sons, Ltd.     

A coupling model of FE–BE–IE–IBE for non-linear layered soil–structure interactions

A coupling model of Finite Elements (FEs), Boundary Elements (BEs), Infinite Elements (IEs) and Infinite Boundary Elements (IBEs) is presented for analysis of soil–structure interaction (SSI). The radiation effects of the infinite layered soil are taken into account by FE–IE coupling, while the underlying bed rock half-space is discretized into BE–IBE coupling whereby the non-horizontal bed rock surface can be accounted for. Displacement compatabilities are satisfied for all types of aforementioned elements. The equivalent linear approach is employed for approximation of nonlinearity of the near field soil. This model has some advantages over the current SSI program in considering the bed rock half-space and non-vertical wave incidence from the far field. Examples of verification demonstrate the applicability and accuracy of the method when compared with the FLUSH program. Finally, the effects of the relative modulus ratio E_r/E_s of rock and soil and the incident angles of non-vertical waves on the responses of the structure and the soil are examined. Copyright © 1999 John Wiley & Sons, Ltd.