Metamorphism of the Koraput Alkaline Complex, Eastern Ghats Province, India—Evidence for reworking of a granulite terrane

An assemblage of predominantly metasedimentary rocks in the Eastern Ghats Province, India, underwent granulite facies metamorphism and deformation in early Neoproterozoic times, and was subsequently intruded by the Koraput alkaline complex. The intrusion was earlier believed to be syn- to late tectonic. The gabbroic core of the complex hosts nepheline-bearing syenitic dykes and veins. Following emplacement, magmatic amphibole within the syenites, and early orthopyroxene in feldspathic gneisses within the country rocks were retrogressed to biotite during pervasive solid-state deformation. Subsequent prograde metamorphism resulted in the formation of anhydrous assemblages at the expense of relict magmatic amphibole within the syenites, and metamorphic biotite in both the complex and the country rocks. Reactions reconstructed from textural observations indicate breakdown of biotite and amphibole to garnet + clinopyroxene ± orthopyroxene-bearing assemblages. Schreinemakers’ analysis on the relevant mineral associations suggests that heating was followed by loading of the region. This indicates thermal rejuvenation of the complex and the host granulites during an intracrustal orogeny that post-dates emplacement and cooling of the pluton. Available ages suggest that this event occurred in the mid-Neoproterozoic, and is probably unrelated to the amalgamation of the granulite belt with the Archaean Bastar/Dharwar craton.     

Superposed deformation and inherited structures in an ancient dilational step-over zone: Post-mortem of the Rengali Province,India

In the eastern Indian shield, a dextral strike-slip system juxtaposed the Archaean Singhbhum Province against the Proterozoic Eastern Ghats Belt at ∼490–470 Ma. Two WNW–ESE trending strands of the strike-slip system enclose a multiply deformed (D₁ to D₃) intervening domain called the Rengali Province, with D₃ representing dextral shearing. In a granulite lens within the province, an early fabric (S_gr) was deformed by an amphibolite facies D₁–D₂ deformation continuum in the late Archaean time, forming cylindrical folds. In the surrounding quartzofeldspathic gneisses, quartzites and mica schists of the province, superimposition of syn-D₃ shortening on D₁-D₂ folds generated complex non-cylindrical geometries; the granulites escaped D₃ strain. Microstructures in the province-bounding shear zones confirm that D₃ deformation was associated with mylonitization, dynamic recrystallization and greenschist facies metamorphism. In the quartzites, syn-D₃ folds can be correlated with rotation of D₁–D₂ structures through the shortening zone of bounding dextral shears. Since the province-bounding shears form a step-over zone, the structural complexity within the Rengali Province arises from superposition of syn-D₃ shortening structures on initially asympathetically oriented inherited cylindrical D₁-D₂ folds. Hydrous fluid channeling causing greenschist facies metamorphism and quartz vein emplacement accompanied D₃ as the step-over zone was dilational in nature.     

U–Pb zircon study of tectonically bounded blocks of 2940–2840 Ma crust with different metamorphic histories,Paamiut region,South-West Greenland: implications for the tectonic assembly of the North Atlantic craton

New fieldwork, map interpretation, petrography and single zircon U–Pb geochronology has allowed the identification of different crustal blocks in the Paamiut region, in the southern portion of the West Greenland Archaean Craton. Changes of metamorphic grade from only amphibolite facies to granulite facies (some subsequently retrogressed) corresponds with zones of Archaean high strain ductile deformation ± mylonites. U–Pb zircon dates are presented for the TTG (tonalite, trondhjemite, granodiorite) protoliths from each block in the Paamiut region, and the southern portion of the previously identified Tasiusarsuaq terrane lying to the north. The southern part of the Tasiusarsuaq terrane contains 2880–2860 Ma TTG rocks and underwent amphibolite facies metamorphism. Structurally underneath the Tasiusarsuaq terrane to the south is the Sioraq block containing 2870–2830 Ma TTG rocks partly retrogressed from granulite facies. Structurally underneath and to the south is the Paamiut block, dominated by 2850–2770 Ma granodioritic rocks that have only undergone amphibolite facies metamorphism. Also structurally overlying the Paamiut block, but cropping out separately from the Sioraq block, is the Neria block. This appears to be dominated by 2940–2920 Ma gneisses that have been totally retrogressed from granulite facies and strongly deformed. In the southernmost part of the region the Neria block overlies the greenschist to lowermost amphibolite facies Sermiligaarsuk block that contains the ⩾2945 Ma Tartoq Group. Rocks from all the blocks record ancient loss of Pb from zircons and some new zircon growth at 2820 Ma, interpreted to indicate a high grade metamorphic event at that time, including granulite facies metamorphism in the Sioraq and Neria blocks. The blocks of different metamorphic grade are interpreted to have moved to their current positions after the 2820 Ma metamorphism, explaining the change in metamorphic history across some mylonites and ductile shear zones which deform and retrogress granulite facies textures. The juxtaposed blocks and their contacts were subsequently folded under amphibolite facies conditions. The contacts are cut by undeformed Palaeoproterozoic dolerite dykes which post-date amphibolite facies metamorphism. These results, together with previously published data from the Godthåbsfjord region (north of Paamiut) shows that the North Atlantic Craton in West Greenland from Ivittuut in the south to Maniitsoq in the north (∼550 km) consists of a mosaic of ductile fault-bounded packages that attained their present relative positions in the late Archaean.     

Evolution of the Mount Woods Inlier, northern Gawler Craton, Southern Australia: an integrated structural and aeromagnetic analysis

Structural mapping integrated with interpretation and forward modelling of aeromagnetic data form complimentary and powerful tools for regional structural analysis because both techniques focus on architecture and overprinting relationships. This approach is used to constrain the geometry and evolution of the sparsely exposed Mount Woods Inlier in the northern Gawler Craton. The Mount Woods Inlier records a history of poly-phase deformation, high-temperature metamorphism, and syn- and post-orogenic magmatism between ca. 1736 and 1584 Ma. The earliest deformation involved isoclinal folding, and the development of bedding parallel and axial planar gneissic foliation (S₁). This was accompanied by high-temperature, upper amphibolite to granulite facies metamorphism at ca. 1736 Ma. During subsequent north–south shortening (D₂), open to isoclinal south–southeast-oriented F₂ folds developed as the Palaeoproterozoic successions of the inlier were thrust over the Archaean nuclei of the Gawler Craton. The syn-D₂ Engenina Adamellite was emplaced at ca. 1692 Ma. The post-D₂ history involved shear zone development and localised folding, exhumation of metamorphic rocks, and deposition of clastic sediments prior to the emplacement of the ca. 1584 Ma Granite Balta Suite. The Mount Woods Inlier is interpreted as the northern continuation of the Kimban Orogen.     

CARBONATITES FROM THE EASTERN HIMALAYAN SYNTAXIS: PETROLOGY AND TECTONIC IMPLICATIONS

Most carbonatites occur in relatively stable, intra\|plate areas but some are found to occur in near to plate margins and may be linked with plate separation (Woolley, 1989). Although many carbonatites have been discovered to occur in the orogenic belts in recent years, most of these rocks are related to post\|orogenic magmatism, that is, the rocks occur in the specially extensional setting. Therefore it is unusual that such magmatic rocks occur in the typical convergent environment. Here we report carbonatites and associated ultramafic and mafic rocks in the core of the eastern Himalayan syntaxis. The eastern Himalayan syntaxis consists of three tectonic units: the Gangdise, the Yarlung Zangbo, and the Himalayan units, each of which is bounded by faults (Liu & Zhong, 1997). The Himalayan unit, the northernmost exposed part of the Indian plate, is divided into two complexes, the amphibolite facies complex in the south and the granulite facies complex in the north. The granulite facies complex in the Himalayan unit have been argued to experience high\|pressure metamorphism and represent materials buried to upper\|mantle depths (Liu & Zhong, 1997). The carbonatites and associated ultramafic and mafic rocks only occur in the granulite facies rocks and are divided into two belts: northern and southern belts.The northern belt extends at least 30km, and is about 20km in width. The southern belt extends several kilometers, and is 3km or so in width. Each belt consists mainly of differently compositional dykes, extending parallel to gneissosity of granulite facies gneiss. Carbonatitic agglomerates are observed in the northern belt. From the center of carbonatite dykes to country rocks, five types of rock are observed: the center parts of carbonatites, the rim parts of carbonatites, ultramafic and mafic rocks, altered rocks and country rocks. The gneissosity of country rock was deformed by intrusion of dykes.     

Deformation history of the Paleoproterozoic Liaohe assemblage in the eastern block of the North China Craton

The Paleoproterozoic Liaohe assemblage and associated Liaoji granitoids represent the youngest basement in the Eastern Block of the North China Craton. Various structural elements and metamorphic reaction relations indicate that the Liaohe assemblage has experienced three distinct deformational events (D₁ to D₃) and four episodes of metamorphism (M₁ to M₄). The earliest greenschist facies event (M₁) is recognized in undeformed or weakly deformed domains wrapped by the S₁ schistosity, suggesting that M₁ occurred before D₁. The D₁ deformation produced small, mostly meter-scale, isoclinal and recumbent folds (F₁), an associated penetrative axial planar schistosity (S₁), a mineral stretching lineation (L₁) and regional-scale ductile shear zones. Concurrent with D₁ was M₂ metamorphism, which occurred before D₂ and produced low- to medium-pressure amphibolite facies assemblages. Regionally divergent motion senses reflected by the asymmetric F₁ folds and other sense-of-shear indicators, together with the radial distribution of the L₁ lineation surrounding the Liaoji granitoids, imply that D₁ represents an extensional event. The D₂ deformation produced open to tight F₂ folds of varying scales, S₂ axial crenulation cleavages and ENE-NE-striking thrust faults, involving broadly NW–SE compression. Following D₂ was M₃ metamorphism that led to the formation of sillimanite and cordierite in low-pressure type rocks and kyanite in medium-pressure rocks. The last deformational event (D₃) formed NW-WNW-trending folds (F₃), axial planar kink bands, spaced cleavages (S₃), and strike–slip and thrust faults, which deflect the earlier D₁ and D₂ structures. D₃ occurred at a shallow crustal level and was associated with, or followed by, a greenschist facies retrograde metamorphic event (M₄).The Liaohe assemblage and associated Liaoji granitoids are considered to have formed in a Paleoproterozoic rift, the late spreading of which led to the occurrence of the early extensional deformation (D₁) and the M₁ and M₂ metamorphism, and the final closing of which was associated with the D₂ and D₃ phases of deformation and M₃ and M₄ metamorphism.     

Two types of Precambrian high-grade metamorphism, Inner Mongolia, China

Abstract Archaean and Proterozoic granulite facies complexes of Inner Mongolia differ in lithological association, tectonic style, mineral assemblage and metamorphic P–T path. A nearly isobaric cooling path for Archaean high-grade metamorphic rocks is suggested by reaction textures and geothermobarometry. Early Proterozoic metamorphic rocks show nearly isothermal decompression. Archaean metamorphism may have been caused by magmatic accretion, whereas early Proterozoic metamorphism suggests a major continental thickening event followed by exhumation.     

http://www.sciencedirect.com/science/article/pii/S1674987112000564

High-pressure（HP） granulites widely occur as enclaves within tonalite-trondhjemitegranodiorite （TTG） gneisses of the Early Precambrian metamorphic basement in the Shandong Peninsula, southeast part of the North China Craton（NCC）.Based on cathodoluminescence（CL）,laser Raman spectroscopy and in-situ U-Pb dating,we characterize the zircons from the HP granulites and group them into three main types:inherited（magmatic） zircon,HP metamorphic zircon and retrograde zircon.The inherited zircons with clear or weakly defined magmatic zoning contain inclusions of apatites,and ²⁰⁷Pb/²⁰⁶Pb ages of 2915—2890 Ma and 2763—2510 Ma,correlating with two magmatic events in the Archaean basement. The homogeneous HP metamorphic zircons contain index minerals of high-pressure metamorphism including garnet,clinopyroxene.plagioclase,quartz,rutile and apatite,and yield ²⁰⁷Pb/²⁰⁶Pb ages between 1900 and 1850 Ma,marking the timing of peak HP granulite fades metamorphism.The retrograde zircons contain inclusions of orthopyroxene.plagioclase.quartz,apatite and amphibole.and yield the youngest ²⁰⁷Pb/²⁰⁶Pb ages of 1840—1820 Ma among the three groups,which we correlate to the medium to low-pressure granulite fades retrograde metamorphism.The data presented in this study suggest subduction of Meso- and Neoarchean magmatic protoliths to lower crust depths where they were subjected to HP granulite facies metamorphism during Palaeoproterozoic（1900—1850 Ma）.Subsequently, the HP granulites were exhumated to upper crust levels,and were overprinted by medium to low-pressure granulite and amphibolite facies retrograde event at ca.1840—820 Ma.     

Olivine‐bearing symplectites in fractured garnet from eclogite,Moldanubian Zone (Bohemian Massif) – a short‐lived,granulite facies event

Recent petrological studies on high‐pressure (HP)–ultrahigh‐pressure (UHP) metamorphic rocks in the Moldanubian Zone, mainly utilizing compositional zoning and solid phase inclusions in garnet from a variety of lithologies, have established a prograde history involving subduction and subsequent granulite facies metamorphism during the Variscan Orogeny. Two temporally separate metamorphic events are developed rather than a single P–T loop for the HP–UHP metamorphism and amphibolite–granulite facies overprint in the Moldanubian Zone. Here further evidence is presented that the granulite facies metamorphism occurred after the HP–UHP rocks had been exhumed to different levels of the middle or upper crust. A medium‐temperature eclogite that is part of a series of tectonic blocks and lenses within migmatites contains a well‐preserved eclogite facies assemblage with omphacite and prograde zoned garnet. Omphacite is partly replaced by a symplectite of diopside + plagioclase + amphibole. Garnet and omphacite equilibria and pseudosection calculations indicate that the HP metamorphism occurred at relatively low temperature conditions of ~600 °C at 2.0–2.2 GPa. The striking feature of the rocks is the presence of garnet porphyroblasts with veins filled by a granulite facies assemblage of olivine, spinel and Ca‐rich plagioclase. These minerals occur as a symplectite forming symmetric zones, a central zone rich in olivine that is separated from the host garnet by two marginal zones consisting of plagioclase with small amounts of spinel. Mineral textures in the veins show that they were first filled mostly by calcic amphibole, which was later transformed into granulite facies assemblages. The olivine‐spinel equilibria and pseudosection calculations indicate temperatures of ~850–900 °C at pressure below 0.7 GPa. The preservation of eclogite facies assemblages implies that the granulite facies overprint was a short‐lived process. The new results point to a geodynamic model where HP–UHP rocks are exhumed to amphibolite facies conditions with subsequent granulite facies heating by mantle‐derived magma in the middle and upper crust.     

Development of fluid conduits in the auriferous shear zones of the Hutti Gold Mine, India: evidence for spatially and temporally heterogeneous fluid flow

The gold mineralization of the Hutti Mine is hosted by nine parallel, N–S trending, steeply dipping, 2–10 m wide shear zones, that transect Archaean amphibolites. The shear zones were formed after peak metamorphism during retrograde ductile D₂ shearing in the lower amphibolite facies. They were reactivated in the lower to mid greenschist facies by brittle–ductile D₃ shearing and intense quartz veining. The development of a S₂–S₃ crenulation cleavage facilitates the discrimination between the two deformation events and contemporaneous alteration and gold mineralization. Ductile D₂ shearing is associated with a pervasively developed distal chlorite–sericite alteration assemblage in the outer parts of the shear zones and the proximal biotite–plagioclase alteration in the center of the shear zones. D₃ is characterized by development of the inner chlorite-K-feldspar alteration, which forms a centimeter-scale alteration halo surrounding the laminated quartz veins and replaces earlier biotite along S₃. The average size of the laminated vein systems is 30–50 m along strike as well as down-dip and 2–6 m in width.Mass balance calculations suggest strong metasomatic changes for the proximal biotite–plagioclase alteration yielding mass and volume increase of ca. 16% and 12%, respectively. The calculated mass and volume changes of the distal chlorite–sericite alteration (ca. 11%, ca. 8%) are lower. The decrease in δ¹⁸O values of the whole rock from around 7.5‰ for the host rocks to 6–7‰ for the distal chlorite–sericite and the proximal biotite–plagioclase alteration and around 5‰ for the inner chlorite-K-feldspar alteration suggests hydrothermal alteration during two-stage deformation and fluid flow.The ductile D₂ deformation in the lower amphibolite facies has provided grain scale porosities by microfracturing. The pervasive, steady-state fluid flow resulted in a disseminated style of gold–sulfide mineralization and a penetrative alteration of the host rocks. Alternating ductile and brittle D₃ deformation during lower to mid greenschist facies conditions followed the fault-valve process. Ductile creep in the shear zones resulted in a low permeability environment leading to fluid pressure build-up. Strongly episodic fluid advection and mass transfer was controlled by repeated seismic fracturing during the formation of laminated quartz(-gold) veins. The limitation of quartz veins to the extent of earlier shear zones indicate the importance of pre-existing anisotropies for fault-valve action and economic gold mineralization.     

Petrochronology of the Terre Adélie Craton (East Antarctica) evidences a long-lasting Proterozoic (1.7–1.5 Ga) tectono-metamorphic evolution — Insights for the connections with the Gawler Craton and Laurentia

The Terre Adélie Craton displays superimposed strain fields related to the Neoarchean (2.6–2.4 Ga, M1) and Paleo-Mesoproterozoic (1.7–1.5 Ga, M2) metamorphic events. M1 is a regional granulite facies event, constrained by P-T modelling at ~0.8–1.0 GPa – 800–850 °C, followed by a decompressional retrogression in the upper amphibolite facies at ~0.6 GPa – 750 °C. M2 Stage 1 P-T peak is constrained at 0.6–0.7 GPa – 670–700 °C, followed by a steep P-T path down to 0.3 GPa – 550 °C. Retrogression after M2 PT peak occurred in a context of dextral shearing along the Mertz Shear Zone along with thrust motions within the eastern Terre Adélie Craton. In this paper, we present a series of 63 new ⁴⁰Ar/³⁹Ar ages of biotite and amphibole pairs in mafic rocks from a complete traverse of the Terre Adélie Craton. ⁴⁰Ar/³⁹Ar dating constrains M2 amphibolite facies metamorphism at a regional scale between 1700 and 1650 Ma, during stage 1 peak metamorphism. During retrogression, lower amphibolite facies recrystallization mainly occurred along vertical shear zones and mafic dykes between 1650 and 1600 Ma (Stage 2), followed by amphibolite to greenschist facies metamorphism until after 1500 Ma (Stage 3). At the scale of the Mawson continent, this event is related to the growth of an active margin above an oblique subduction zone. The supra-subduction model best explains opening of Dumont D'Urville and Hunter basins at 1.71 Ga followed by their rapid closure and metamorphism at 1.70 Ga. In this context, episodic shear zone reactivation and magmatic dyke emplacement led to a partial reequilibration of the ⁴⁰Ar/³⁹Ar system until <1500 Ma. This latter phase of mafic magmatism largely coincides with a hot spot event at the scale of the Gawler Craton and western Laurentia paleocontinent.     

Metamorphic petrology and zircon geochronology of high-grade rocks from the central Mozambique Belt of Tanzania: crustal recycling of Archean and Palaeoproterozoic material during the Pan-African orogeny

New data on the metamorphic petrology and zircon geochronology of high‐grade rocks in the central Mozambique Belt (MB) of Tanzania show that this part of the orogen consists of Archean and Palaeoproterozoic material that was structurally reworked during the Pan‐African event. The metamorphic rocks are characterized by a clockwise P–T path, followed by strong decompression, and the time of peak granulite facies metamorphism is similar to other granulite terranes in Tanzania. The predominant rock types are mafic to intermediate granulites, migmatites, granitoid orthogneisses and kyanite/sillimanite‐bearing metapelites. The meta‐granitoid rocks are of calc‐alkaline composition, range in age from late Archean to Neoproterozoic, and their protoliths were probably derived from magmatic arcs during collisional processes. Mafic to intermediate granulites consist of the mineral assemblage garnet–clinopyroxene–plagioclase–quartz–biotite–amphibole ± K‐feldspar ± orthopyroxene ± oxides. Metapelites are composed of garnet‐biotite‐plagioclase ± K‐feldspar ± kyanite/sillimanite ± oxides. Estimated values for peak granulite facies metamorphism are 12–13 kbar and 750–800 °C. Pressures of 5–8 kbar and temperatures of 550–700 °C characterize subsequent retrogression to amphibolite facies conditions. Evidence for a clockwise P–T path is provided by late growth of sillimanite after kyanite in metapelites. Zircon ages indicate that most of the central part of the MB in Tanzania consists of reworked ancient crust as shown by Archean (c. 2970–2500 Ma) and Palaeoproterozoic (c. 2124–1837 Ma) protolith ages. Metamorphic zircon from metapelites and granitoid orthogneisses yielded ages of c. 640 Ma which are considered to date peak regional granulite facies metamorphism during the Pan‐African orogenic event. However, the available zircon ages for the entire MB in East Africa and Madagascar also document that peak metamorphic conditions were reached at different times in different places. Large parts of the MB in central Tanzania consist of Archean and Palaeoproterozoic material that was reworked during the Pan‐African event and that may have been part of the Tanzania Craton and Usagaran domain farther to the west.     

A review of the stratigraphy and geological setting of the Palaeoproterozoic Magondi Supergroup,Zimbabwe – Type locality for the Lomagundi carbon isotope excursion

The Palaeoproterozoic Magondi Supergroup lies unconformably on the Archaean granitoid-greenstone terrain of the Zimbabwe Craton and experienced deformation and metamorphism at 2.06–1.96 Ga to form the Magondi Mobile Belt. The Magondi Supergroup comprises three lithostratigraphic units. Volcano-sedimentary rift deposits (Deweras Group) are unconformably overlain by passive margin, back-arc, and foreland basin sedimentary successions, including shallow-marine sedimentary rocks (Lomagundi Group) in the east, and deeper-water shelf to continental slope deposits in the west (Piriwiri Group). Based on the upward-coarsening trend and presence of volcanic rocks at the top of the Piriwiri and Lomagundi groups, the Piriwiri Group is considered to be a distal, deeper-water time-equivalent of the Lomagundi Group. The Magondi Supergroup experienced low-grade metamorphism in the southeastern zone, but the grade increases to upper greenschist and amphibolite facies grade to the north along strike and, more dramatically, across strike to the west, reaching upper amphibolite to granulite facies in the Piriwiri Group.     

Ultrahigh-temperature mafic granulite in the Huai’an Complex,North China Craton: Evidence from phase equilibria modelling and amphibole thermometers

The Huai’an Complex in the north-western Trans-North China Orogen, North China Craton is recognized to have undergone high-pressure metamorphism with controversial ages. Two mafic granulite samples (17HT13 and 16HT22) from Huangtuyao of the Huai’an Complex are documented for metamorphism based on petrography, mineral chemistry, phase equilibria modelling and zircon dating. The rocks comprise garnet, clinopyroxene, orthopyroxene, amphibole, plagioclase and ilmenite. They show clockwise P-T paths involving the pre-T_max decompressional heating, the T_max and the post-T_max cooling stages. The pre-T_max decompressional heating is revealed by the core-rim/mantle anorthite-ascending zoning in coarse-grained plagioclase. The T_max stage is constrained to 8.5–10.5 kbar/980–1010 °C (17HT13) and 7.5–9.5 kbar/1000–1030 °C (16HT22) by the high Ti content of amphibole, and the anorthite content of coarse-grained plagioclase rims/mantles and fine-grained plagioclase cores. These temperatures are slightly higher than the results of amphibole thermometers (∼940–980 °C). The post-T_max cooling is defined by the later growth of amphibole and some conventional geothermobarometers. Because it is dominated by temperature with ilmenite present, the Ti content of amphibole is proposed as a reliable thermometer, and the Ti-rich amphibole with Ti > 0.28 p.f.u. or TiO₂ > 2.4–2.6 wt% is indicative of ultrahigh-temperature (>900 °C, UHT) conditions. The anorthite content of plagioclase is also significant in confining peak temperatures for UHT granulite but requires defining proper water content. Zircon dating for 17HT13 yields an upper intercept age of 1910 ± 35 Ma, representing the cooling of UHT granulite. We conclude that the Huai’an Complex may have at least locally undergone UHT metamorphism at ∼1.92–1.91 Ga after high-pressure granulite metamorphism at ∼1.95 Ga, similar to the Jining Complex. Therefore, the Huai’an and Jining Complexes share the same tectonic evolution involving ∼1.95 Ga crustal thickening, ∼1.92–1.91 Ga extension with regional or local UHT metamorphism, and subsequent cooling and uplifting.     

Geological observations in high‐grade mid‐Proterozoic rocks from Else Platform,northern Prince Charles mountains region,east Antarctica

Granulite facies rocks on Else Platform in the northern Prince Charles Mountains, east Antarctica, consist of metasedimentary gneiss extensively intruded by granitic rocks. The dominant rock type is a layered garnetbiotite‐bearing gneiss intercalated with minor garnet‐cordierite‐sillimanite gneiss and calc‐silicate. Voluminous megacrystic granite intruded early during a mid‐Proterozoic (ca 1000 Ma) granulite event, M₁, widely recognized in east Antarctica. Peak metamorphic conditions for M₁ are in the range of 650–750 MPa at ～800°C and were associated with the development of a gneissic foliation, S₁ and steep east‐plunging lineation, L₁. Strain partitioning during progressive non‐coaxial deformation formed large D₂ granulite facies south‐dipping thrusts, with a steep, east‐plunging lineation. In areas of lower D₂ strain, large‐scale upright, steep east‐plunging fold structures formed synchronously with the D₂ high‐strain zones. Voluminous garnet‐bearing leucogneiss intruded at 940 ±20 Ma and was deformed in the D₂ high‐strain zones. Textural relationships in pelitic rocks show that peak‐M2 assemblages formed during increasing temperatures via reactions such as biotite + sillimanite + quartz ± plagioclase = spinel + cordierite + ilmenite + K‐feldspar + melt. In biotite‐absent rocks, re‐equilibration of deformed M₁ garnet‐sillimanite‐ilmenite assemblages occurred through decompressive reactions of the form, garnet + sillimanite + ilmenite = cordierite + spinel + quartz. Pressure/temperature estimates indicate that peak‐M₂ conditions were 500–600 MPa and 700±50°C. At about 500 Ma, north‐trending granitic dykes intruded and were deformed during D₃‐M₃ at probable upper amphibolite facies conditions. Cooling from peak D₃‐M₃ conditions was associated with the formation of narrow greenschist facies shear zones, and the intrusion of pegmatite. Cross‐cutting all features are abundant north‐south trending alkaline mafic dykes that were emplaced over the interval ca 310–145 Ma, reflecting prolonged intrusive activity. Some of the dykes are associated with steeply dipping faults that may be related to basin formation during Permian times and later extension, synchronous with the formation of the Lambert Graben in the Cretaceous.     

Implication of corona formation in a metatroctolite to the granulite facies overprint of HP–UHP rocks in the Moldanubian Zone (Bohemian Massif)

Corona and inclusion textures of a metatroctolite at the contact between felsic granulite and migmatites of the Gföhl Unit from the Moldanubian Zone provide evidence of the magmatic and metamorphic evolution of the rocks. Numerous diopside inclusions (1–10 μm, maximum 20 μm in size) in plagioclase of anorthite composition represent primary magmatic textures. Triple junctions between the plagioclase grains in the matrix are occupied by amphibole, probably pseudomorphs after clinopyroxene. The coronae consist of a core of orthopyroxene, with two or three zones (layers); the innermost is characterized by calcic amphibole with minor spinel and relicts of clinopyroxene, the next zone consists of symplectite of amphibole with spinel, sapphirine and accessory corundum, and the outermost is formed by garnet and amphibole with relicts of spinel. The orthopyroxene forms a monomineralic aggregate that may contain a cluster of serpentine in the core, suggesting its formation after olivine. Based on mineral textures and thermobarometric calculations, the troctolite crystallized in the middle to lower crust and the coronae were formed during three different metamorphic stages. The first stage relates to a subsolidus reaction between olivine and anorthite to form orthopyroxene. The second stage involving amphibole formation suggests the presence of a fluid that resulted in the replacement of igneous orthopyroxene and governed the reaction orthopyroxene + anorthite = amphibole + spinel. The last stage of corona formation with amphibole + spinel + sapphirine indicates granulite facies conditions. Garnet enclosing spinel, and its occurrence along the rim of the coronae in contact with anorthite, suggests that its formation occurred either during cooling or both cooling and compression but still at granulite facies conditions. The zircon U–Pb data indicate Variscan ages for both the troctolite crystallization (c. 360 Ma) and corona formation during granulite facies metamorphism (c. 340 Ma) in the Gföhl Unit. The intrusion of troctolite and other Variscan mafic and ultramafic rocks is interpreted as a potential heat source for amphibolite–granulite facies metamorphism that led to partial re‐equilibration of earlier high‐ to ultrahigh‐P metamorphic rocks in the Moldanubian Zone. These petrological and geochronological data constrain the formation of HP–UHP rocks and arc‐related plutonic complex to westward subduction of the Moldanubian plate during the Variscan orogeny. After exhumation to lower and/or middle crust, the HP–UHP rocks underwent heating due to intrusion of mafic and ultramafic magma that was generated by slab breakoff and mantle upwelling.     

Dating granulite-facies structures and the exhumation of lower crust in the Moldanubian Zone of the Bohemian Massif

Deformation of granulite-facies rocks in the Moldanubian Zone of the southern Bohemian Massif is expressed in two intersecting planar fabrics - steeply disposed (S₁) and flat-laying (S₂) - which correspond to two deformation stages (D₁) and (D₂). The existing Sm-Nd garnet ages from banded granulite gneisses, new U-Pb zircon data from deformed granite intrusions within the granulite gneisses, and the P-T and field structural relations constrain the ages and P-T conditions of the two deformation phases. The early deformation (D₁) was associated with a HP-HT metamorphic stage with a minimum age of ca. 354 Ma which was followed by a near-isothermal decompression. A concordant U-Pb zircon age of 318ǃ Ma dates the emplacement of intrusions of deformed granite into the granulite gneisses and constrains deformation phase (D₂). This phase was associated with an LP-HT metamorphism dated in the region at ca. 340-330 Ma. The available structural and isotopic data indicate that granulites in the southern Bohemian Massif were exhumed from lower to middle crust during compression. The structural relations and P-T-t data for the studied granulites are consistent with their exhumation by near-vertical extrusion of the softened orogenic root.     

Metamorphism of the Basement of the Qilian Fold Belt in the Minhe-Ledu Area, Qinghai Province, NW China

The basement of the central Qilian fold belt exposed along the Minhe-Ledu highway consists of psammitic schists, metabasitic rocks, and crystalline limestone. Migmatitic rocks occur sporadically among psammitic schist and metabasitic rocks. The mineral assemblage of psammitic schist is muscovite + biotite + feldspar + quartz ± tourmaline ± titanite ± sillimanite and that of metabasitic rocks is amphibole + plagioclase + biotite ± apatite ± magnetite ± pyroxene ± garnet ± quartz. The migmatitic rock consists of leucosome and restite of various volume proportions; the former consists of muscovite + alkaline feldspar + quartz ± garnet ± plagioclase while the latter is either fragments of psammitic schist or those of metabasitic rock. The crystalline limestone consists of calcite that has been partly replaced by olivine. The olivine was subsequently altered to serpentine. Weak deformations as indicated by cleavages and fractures were imposed prominently on the psammitic schists, occasionally on me     

Petrology of the Udayagiri anorthosite complex, Eastern Ghats Belt, India

The Eastern Ghats Belt (EGB), characterised by pervasive Grenvillian granulite facies metamorphism, is the host to several 950–1000 Ma old massif-type anorthosite complexes. The present work describes one such complex near Udayagiri from the northern margin of the EGB, reported for the first time as “Udayagiri anorthosite complex” (UAC). The ‘massif type’ UAC comprises mainly of anorthosite, leuconorite-olivine leuconorite and norite in the decreasing order of areal extent. Mineralogically, these rocks dominantly consist of cumulates of moderately calcic plagioclase (～An_50–60), moderately magnesian intercumulus olivine (X_Mg: ～0.6) and orthopyroxene (X_Mg: 0.47 to 0.70). Metamorphic garnet (Alm: ～50 mol%) is also common in these rocks. Anorthosite and leuconorite of the UAC exhibit a moderate ‘+ve’ Eu anomaly. Norite occurs locally as schlierens and is relatively rich in Fe, P, Rb, Sr, Th, Nb, Ta, Y and REE which could be a residual melt product. These rocks exhibit both relict magmatic mineralogy and textures with a metamorphic impress manifested by the development of multilayered corona involving olivine, orthopyroxene, garnet, phlogopite, ilmenite and plagioclase during cooling of the pluton. The corona development is a result of combination of significant magmatic and metamorphic reactions which have the potential to provide important clues for deciphering the magmatic and metamorphic evolution of such plutons in ambient granulite facies conditions.     

The role of heterogeneous strain in the development and preservation of a polymetamorphic record in high-P granulites, western Canadian Shield

Mafic rocks in the Chipman domain of the Athabasca granulite terrane, western Canadian Shield, provide the first well‐documented record of two distinct high‐P granulite facies events in the same domain in this region. Textural relations and the results of petrological modelling (NCFMASHT system) of mafic granulites are interpreted in terms of a three‐stage tectonometamorphic history. Stage 1 involved development of the assemblage Grt + Cpx + Qtz ± Pl (M₁) from a primary Opx‐bearing igneous precursor at conditions of 1.3 GPa, 850–900 °C. Field and microstructural observations suggest that M₁ developed synchronously with an early S₁ gneissic fabric. Stage 2 is characterized by heterogeneous deformation (D₂) and synkinematic partial retrogression of the peak assemblage to an amphibole‐bearing assemblage (M₂). Stage 3 involved a third phase of deformation and a return to granulite facies conditions marked by the prograde breakdown of amphibole (Amph₂) to produce matrix garnet (Grt_3a) and the coronitic assemblage Cpx_3b + Opx_3b + Ilm_3b + Pl_3b (M_3b) at 1.0 GPa, 800–900 °C. M₁ and M_3b are correlated with 2.55 and 1.9 Ga metamorphic generations of zircon, respectively, which were dated in a separate study. Heterogeneous strain played a crucial role in both the development and preservation of these rare examples of multiple granulite facies events within single samples. Without this fortuitous set of circumstances, the apparent reaction history could have incorrectly led to an interpretation involving a single‐cycle high‐grade event. The detailed P–T–t–D history constructed for these rocks provides the best evidence to date that much of the east Lake Athabasca region experienced long‐term lower crustal residence from 2.55 to 1.9 Ga, and thus the region represents a rare window into the reactivation and ultimate stabilization processes of cratonic lithosphere.