Penetrative convection and multi-component diffusion in a porous medium

Linear instability and nonlinear energy stability analyses are developed for the problem of a fluid-saturated porous layer stratified by penetrative thermal convection and two salt concentrations. Unusual neutral curves are obtained, in particular non-perfect `heart-shaped' oscillatory curves that are disconnected from the stationary neutral curve. These curves show that three critical values of the thermal Rayleigh number may be required to fully describe the linear stability criteria. As the penetrative effect is increased, the oscillatory curves depart more and more from a perfect heart shape. For certain values of the parameters it is shown that the minima on the oscillatory and stationary curves occur at the same Rayleigh number but different wavenumbers, offering the prospect of different types of instability occurring simultaneously at different wavenumbers. A weighted energy method is used to investigate the nonlinear stability of the problem and yields unconditional results guaranteeing nonlinear stability for initial perturbations of arbitrary sized amplitude.     

The effect of stratification and compressibility on anelastic convection in a rotating plane layer

We study the effect of stratification and compressibility on the threshold of convection and the heat transfer by developed convection in the nonlinear regime in the presence of strong background rotation. We consider fluids both with constant thermal conductivity and constant thermal diffusivity. The fluid is confined between two horizontal planes with both boundaries being impermeable and stress-free. An asymptotic analysis is performed in the limits of weak compressibility of the medium and rapid rotation (τ^?1/12???|θ|???1, where τ is the Taylor number and θ is the dimensionless temperature jump across the fluid layer). We find that the properties of compressible convection differ significantly in the two cases considered. Analytically, the correction to the characteristic Rayleigh number resulting from small compressibility of the medium is positive in the case of constant thermal conductivity of the fluid and negative for constant thermal diffusivity. These results are compared with numerical solutions for arbitrary stratification. Furthermore, by generalizing the nonlinear theory of Julien and Knobloch [Fully nonlinear three-dimensional convection in a rapidly rotating layer. Phys. Fluids 1999, 11, 1469–1483] to include the effects of compressibility, we study the Nusselt number in both cases. In the weakly nonlinear regime we report an increase of efficiency of the heat transfer with the compressibility for fluids with constant thermal diffusivity, whereas if the conductivity is constant, the heat transfer by a compressible medium is more efficient than in the Boussinesq case only if the specific heat ratio γ is larger than two.     

Convection in rotating annular channels heated from below. Part 1. Linear stability and weakly nonlinear mean flows

Convection in a Boussinesq fluid in an annular channel rotating about a vertical axis with lateral rigid sidewalls, stress-free top and bottom, uniformly heated from below is investigated. The sidewalls are assumed to be either perfectly insulating or conducting. Three different types of convection are identified when the channel is rotating sufficiently fast: (i) global oscillatory convection preferred for small Prandtl numbers in channels with intermediate or large aspect ratios (width to height ratio), (ii) wall-localized oscillatory convection representing the most unstable mode for moderate or large Prandtl numbers in channels with intermediate or large aspect ratios and (iii) global stationary convection preferred in channels with sufficiently small aspect ratios regardless of the size of the Prandtl number. The corresponding weakly nonlinear problem describing differential rotation and meridional circulation is also examined, showing that geostrophic, multiple-peaked (two prograde and two retrograde) differential rotation can be maintained by the Reynolds stresses in wall-localized convective eddies in a rapidly rotating channel.     

Heat transport by variable viscosity convection and implications for the Earth's thermal evolution

The case is presented that the efficiency of variable viscosity convection in the Earth's mantle to remove heat may depend only very weakly on the internal viscosity or temperature. An extensive numerical study of the heat transport by 2-D steady state convection with free boundaries and temperature dependent viscosity was carried out. The range of Rayleigh numbers (Ra) is 10⁴?10⁷ and the viscosity contrast goes up to 250000. Although an absolute or relative maximum of the Nusselt number (Nu) is obtained at long wavelength in a certain parameter range, at sufficiently high Rayleigh number optimal heat transport is achieved by an aspect ratio close to or below one. The results for convection in a square box are presented in several ways. With the viscosity ratio fixed and the Rayleigh number defined with the viscosity at the mean of top and bottom temperature the increase of Nu with Ra is characterized by a logarithmic gradient β = ?ln(Nu)/? ln(Ra) in the range of 0.23–0.36, similar to constant viscosity convection. More appropriate for a cooling planetary body is a parameterization where the Rayleigh number is defined with the viscosity at the actual average temperature and the surface viscosity is fixed rather than the viscosity ratio. Now the logarithmic gradient β falls below 0.10 when the viscosity ratio exceeds 250, and the velocity of the surface layer becomes almost independent of Ra. In an end-member model for the Earth's thermal evolution it is assumed that the Nusselt number becomes virtually constant at high Rayleigh number. In the context of whole mantle convection this would imply that the present thermal state is still affected by the initial temperature, that only 25–50% of the present-day heat loss is balanced by radiogenic heat production, and the plate velocities were about the same during most of the Earth's history.     

Thermal convection in differentially rotating systems

Abstract

The onset of convection in a cylindrical fluid annulus is analyzed in the case when the cylindrical walls are rotating differentially, a temperature gradient in the radial direction is applied, and the centrifugal force dominates over gravity. The small gap approximation is used and no-slip conditions on the cylindrical walls are assumed. It is found that over a considerable range of the parameter space either convection rolls aligned with the axis of rotation or rolls in the perpendicular (azimuthal) direction are preferred. It is shown that by a suitable redefinition of parameters, results for finite amplitude Taylor vortices and for convection rolls in the presence of shear can be applied to the present problem. Weakly nonlinear results for transverse rolls in a Couette flow indicate the possibility of subcritical bifurcation for Prandtl numbers P less than 0.82. Heat and momentum transports are derived as functions of P and the problem of interaction between transverse and longitudinal rolls is considered. The relevance of the analysis for problems of convection in planetary and stellar atmospheres is briefly discussed.     

Convection in rotating annular channels heated from below. Part 3: Experimental boundary conditions

Results are presented from both linear stability analysis and numerical simulations of three-dimensional nonlinear convection in a Boussinesq fluid in an annular channel, under experimental boundary conditions, rotating about a vertical axis uniformly heated from below. The focus is placed on the Prandtl number Pr = 7.0, representing liquid water at room temperature. The linear analysis shows that, when the aspect ratio is sufficiently small, there exists only one stationary mode that occupies the whole fluid container. When the aspect ratio is moderate or large, however, there exist three different linear solutions: (i) the outer sidewall-localized traveling wave propagating against the sense of rotation; (ii) the inner sidewall-localized traveling wave propagating in the same sense as rotation; and (iii) both the counter-traveling waves occurring simultaneously. Guided by the result of the linear stability analysis, fully three-dimensional simulations are then performed for a channel with a moderate aspect ratio. It is found that neither the prograde nor the retrograde mode is physically realizable near threshold and beyond. The dynamics of nonlinear convection in a rotating channel are chiefly characterized by the interaction between the sidewall-localized waves and the interior convection cells/rolls, producing an interesting and unusual nonlinear phenomenon. In order to compare with the classical Rayleigh–Bénard problem without vertical sidewalls, we also study linear and nonlinear convection at exactly the same parameters but in an infinitely extended layer with periodic horizontal conditions. This reveals that both the linear instability and nonlinear convection in a rotating channel are characteristically different from those in a rotating layer with periodic horizontal conditions.     

Comment on the effect of anisotropy on the onset of convection in a porous medium

The effect of anisotropy on the onset of convection in a saturated porous medium is discussed. In particular, the case of time-dependent density-driven convection is examined. The applicability of the value of an equivalent Rayleigh number as the criterion for the onset of convection is discussed.     

The onset of convection in a rotating layer of viscous fluid with an imposed magnetic field: the dependence on the prandlt numbers

The onset of Boussinesq convection in a horizontal layer of an electrically conducting incompressible fluid is considered. The layer rotating about a vertical axis is heated from below; a vertical magnetic field is imposed. Rigid electrically insulating boundaries are assumed. The loss of stability of the trivial steady state, which occurs as the Rayleigh numbers increase, can be accompanied by the development of a monotonic or an oscillatory instability, depending on the parameter values of the problem at hand (the Taylor number, the Chandrasekhar number, the kinematic and the magnetic Prandtl numbers). When the instability is monotonic, the emerging convective rolls themselves are also unstable if the Taylor number is sufficiently large (the so-called Küppers-Lortz instability takes place). In the present work it is studied how the critical value of the Rayleigh number, the type of the trivial steady state instability, and the critical value of the Taylor number for the Küppers-Lortz instability depend on the kinematic and the magnetic Prandtl numbers. We consider the values of the Prandtl number not exceeding 1, which is typical for the outer core of the Earth.     

Nonlinear internal waves in the upper atmosphere

To investigate the mechanism of mixing in oscillatory doubly diffusive (ODD) convection, we truncate the horizontal modal expansion of the Boussinesq equations to obtain a simplified model of the process. In the astrophysically interesting case with low Prandtl number (traditionally called semiconvection), large-scale shears are generated as in ordinary thermal convection. The interplay between the shear and the oscillatory convection produces intermittent overturning of the fluid with significant mixing. By contrast, in the parameter regime appropriate to sea water, large-scale flows are not generated by the convection. However, if such flows are imposed externally, intermittent overturning with enhanced mixing is observed.     

Models of solar differential rotation

Abstract

Models of a differentially rotating compressible convection zone are calculated, considering the inertial forces in the poloidal components of the equations of motion. Two driving mechanisms have been considered: latitude dependent heat transport and anisotropic viscosity. In the former case a meridional circulation is induced initially which in turn generates differential rotation, whereas in the latter case differential rotation is directly driven by the anisotropic viscosity, and the meridional circulation is a secondary effect.

In the case of anisotropic viscosity the choice of boundary conditions has a big influence on the results: depending on whether or not the conditions of vanishing pressure perturbation are imposed at the bottom of the convection zone, one obtains differential rotation with a fast (≥ 10 ms^?1) or a slow (～ 1 ms^?1) circulation. In the latter case the rotation law is mainly a function of radius and the rotation rate increases inwards if the viscosity is larger in radial direction than in the horizontal directions.

The models with latitude dependent heat transport exhibit a strong dependence on the Prandtl number. For values of the Prandtl number less than 0.2 the pole-equator temperature difference and the surface velocity of the meridional circulation are compatible with observations. For sufficiently small values of the Prandtl number the convection zone becomes globally unstable like a layer of fluid for which the critical Rayleigh number is exceeded.     

Large wavenumber convection in the rotating annulus

Abstract

The annulus model considers convection between concentric cylinders with sloping endwalls. It is used as a simplified model of convection in a rapidly rotating sphere. Large azimuthal wavenumbers are preferred in this problem, and this has been exploited to develop an asymptotic approach to nonlinear convection in the annulus. The problem is further reduced because the Taylor-Proudman constraint simplifies the dependence in the direction of the rotation vector, so that a nonlinear system dependent only on the radial variable and time results. As Rayleigh number is increased a sequence of bifurcations is found, from steady solutions to periodic solutions and 2-tori, typically ending in chaotic behaviour. Both the magnetic (MHD convection) and non-magnetic problem has been considered, and in the non-magnetic case our bifurcation sequence can be compared with those found by previous two-dimensional numerical simulations.     

Oscillatory large-scale dynamos from Cartesian convection simulations

We present results from compressible Cartesian convection simulations with and without imposed shear. In the former case the dynamo is expected to be of α² Ω type, which is generally expected to be relevant for the Sun, whereas the latter case refers to α² dynamos that are more likely to occur in more rapidly rotating stars whose differential rotation is small. We perform a parameter study where the shear flow and the rotational influence are varied to probe the relative importance of both types of dynamos. Oscillatory solutions are preferred both in the kinematic and saturated regimes when the negative ratio of shear to rotation rates, q?≡??S/Ω, is between 1.5 and 2, i.e. when shear and rotation are of comparable strengths. Other regions of oscillatory solutions are found with small values of q, i.e. when shear is weak in comparison to rotation, and in the regime of large negative qs, when shear is very strong in comparison to rotation. However, exceptions to these rules also appear so that for a given ratio of shear to rotation, solutions are non-oscillatory for small and large shear, but oscillatory in the intermediate range. Changing the boundary conditions from vertical field to perfect conductor ones changes the dynamo mode from oscillatory to quasi-steady. Furthermore, in many cases an oscillatory solution exists only in the kinematic regime whereas in the nonlinear stage the mean fields are stationary. However, the cases with rotation and no shear are always oscillatory in the parameter range studied here and the dynamo mode does not depend on the magnetic boundary conditions. The strengths of total and large-scale components of the magnetic field in the saturated state, however, are sensitive to the chosen boundary conditions.     

Numerical simulation of Martian historical dynamo: Impact of the Rayleigh number on the dynamo state

The observed Mars remnant magnetism suggests that there was an active dynamo in the Martian core. We use the MoSST core dynamics model to simulate the Martian historical dynamo, focusing on the variation of the dynamo states with the Rayleigh number Ra (a non-dimensional parameter describing the buoyancy force in the core). Our numerical results show that the mean field length scale does not vary monotonically with the Rayleigh number, and the field morphology at the core mantle boundary changes with Rayleigh number. In particular, it drifts westward with a speed decreasing with Rayleigh number. Supported by National Natural Science Foundation of China (Grant No. 40328006)     

Nonlinear Convection in a Rotating Annulus with a Finite Gap

Thermal convection in a fluid-filled gap between the two corotating, concentric cylindrical sidewalls with sloping curved ends driven by radial buoyancy was first studied by Busse (Busse, F.H., "Thermal instabilities in rapidly rotating systems", J. Fluid Mech . 44 , 441-460 (1970)). The annulus model captures the key features of rotating convection in full spherical geometry and has been widely employed to study convection, magnetoconvection and dynamos in planetary systems, usually in connection with the small-gap approximation neglecting the effect of azimuthal curvature of the annulus. This article investigates nonlinear thermal convection in a rotating annulus with a finite gap through numerical simulations of the full set of nonlinear convection equations. Three representative cases are investigated in detail: a large-gap annulus with the ratio of the radii ( s i and s o ) of the sidewalls ξ = s i / o s = 0.1, a medium-gap annulus with ξ = 0.35 and a small-gap annulus with ξ = 0.8. Near the onset of convection, the effect of rapid rotation through the sloping ends forces the first (Hopf) bifurcation in the form of small-scale, steadily drifting rolls (thermal Rossby waves). At moderately large Rayleigh numbers, a variety of different convection patterns are found, including mixed-mode steadily drifting, quasi-periodic (vacillating) and temporally chaotic convection in association with various temporal and spatial symmetry-breaking bifurcations. Our extensive simulations suggest that competition between nonlinear and rotational effects with increasing Rayleigh number leads to an unusual sequence of bifurcation characterized by enlarging the spatial scale of convection.     

Numerical simulations of mantle convection: Time-dependent,three-dimensional,compressible, spherical shell

Abstract

We describe nonlinear time-dependent numerical simulations of whole mantle convection for a Newtonian, infinite Prandtl number, anelastic fluid in a three-dimensional spherical shell for conditions that approximate the Earth's mantle. Each dependent variable is expanded in a series of 4,096 spherical harmonics to resolve its horizontal structure and in 61 Chebyshev polynomials to resolve its radial structure. A semiimplicit time-integration scheme is used with a spectral transform method. In grid space there are 61 unequally-spaced Chebyshev radial levels, 96 Legendre colatitudinal levels, and 192 Fourier longitudinal levels. For this preliminary study we consider four scenarios, all having the same radially-dependent reference state and no internal heating. They differ by their radially-dependent linear viscous and thermal diffusivities and by the specified temperatures on their isothermal, impermeable, stress-free boundaries. We have found that the structure of convection changes dramatically as the Rayleigh number increases from 10⁵ to 10⁶ to 10⁷. The differences also depend on how the Rayleigh number is increased. That is, increasing the superadiabatic temperature drop, δT, across the mantle produces a greater effect than decreasing the diffusivities. The simulation with a Rayleigh number of 10⁷ is approximately 10,000 times critical, close to estimates of that for the Earth's mantle. However, although the velocity structure for this highest Rayleigh number scenario may be adequately resolved, its thermodynamic structure requires greater horizontal resolution. The velocity and thermodynamic structures of the scenarios at Rayleigh numbers of 10⁵ and 10⁶ appear to be adequately resolved. The 10⁵ Rayleigh number solution has a small number of broad regions of warm upflow embedded in a network of narrow cold downflow regions; whereas, the higher Rayleigh number solutions (with large δT) have a large number of small hot upflow plumes embedded in a broad weak background of downflow. In addition, as would be expected, these higher Rayleigh number solutions have thinner thermal boundary layers and larger convective velocities, temperatures perturbations, and heat fluxes. These differences emphasize the importance of developing even more realistic models at realistic Rayleigh numbers if one wishes to investigate by numerical simulation the type of convection that occurs in the Earth's mantle.     

Thermal evolution of Venus

The theory of three-dimensional and finite-amplitude convection in a viscous spherical shell with temperature and pressure dependent physical parameters is developed on the basis of a modified Boussinesq fluid assumption. The lateral dependences of the variables are resolved through their spherical harmonic representations, whereas their radial and time dependences are determined by numerical procedures. The theory is then applied to produce thermal evolution models for Venus. The emphasis is on illustrating the effects of certain physical parameters on the thermal evolution rather than proposing a specific thermal history for the planet. The main conclusions achieved in this paper are (1) a significant portion of the present temperature in the mantle and heat flux at the surface of Venus is probably owing to the decay of a high temperature established in the planet at the completion of its core formation, (2) the effective Rayleigh number of the mantle is so high that even the lower order modes of convection cool the planet sufficiently and maintain an almost adiabatic temperature gradient in the convecting region and high temperature gradients in the thermal boundary layers, (3) the convection is oscillatory with avalanche type properties which induces oscillatory features to the surface heat flux and the thickness of the crustal layer, and (4) a planetary model with a recycling crust cools much faster than those with a permanently buoyant crust.The models presented in this paper suggest that Venus has been highly convective during its history until ～ 0.5 Ga ago. The vigorous convection was bringing hot and fresh material from the deep interior to the surface and dragging down the crustal slags, floating on the surface, in to the mantle. The rate of cooling of the planet was so high that its core has solidified. In the last 0.5 Ga the vigour of convection diminished considerably and the crustal slags developed into a global and permanently buoyant crustal layer. The tectonic style on Venus has, consequently, changed from the recycling of crustal plates to hot spot volcanics. At the present time the planet is completely solid, except in the upper part of its mantle where partial melting may occur.     

Dynamos with weakly convecting outer layers: implications for core-mantle boundary interaction

Convection in the Earth's core is driven much harder at the bottom than the top. This is partly because the adiabatic gradient steepens towards the top, partly because the spherical geometry means the area involved increases towards the top, and partly because compositional convection is driven by light material released at the lower boundary and remixed uniformly throughout the outer core, providing a volumetric sink of buoyancy. We have therefore investigated dynamo action of thermal convection in a Boussinesq fluid contained within a rotating spherical shell driven by a combination of bottom and internal heating or cooling. We first apply a homogeneous temperature on the outer boundary in order to explore the effects of heat sinks on dynamo action; we then impose an inhomogeneous temperature proportional to a single spherical harmonic Y ₂² in order to explore core-mantle interactions. With homogeneous boundary conditions and moderate Rayleigh numbers, a heat sink reduces the generated magnetic field appreciably; the magnetic Reynolds number remains high because the dominant toroidal component of flow is not reduced significantly. The dipolar structure of the field becomes more pronounced as found by other authors. Increasing the Rayleigh number yields a regime in which convection inside the tangent cylinder is strongly affected by the magnetic field. With inhomogeneous boundary conditions, a heat sink promotes boundary effects and locking of the magnetic field to boundary anomalies. We show that boundary locking is inhibited by advection of heat in the outer regions. With uniform heating, the boundary effects are only significant at low Rayleigh numbers, when dynamo action is only possible for artificially low magnetic diffusivity. With heat sinks, the boundary effects remain significant at higher Rayleigh numbers provided the convection remains weak or the fluid is stably stratified at the top. Dynamo action is driven by vigorous convection at depth while boundary thermal anomalies dominate in the upper regions. This is a likely regime for the Earth's core.     

Topology of Rayleigh–Bénard convection and magnetoconvection in plane layer

ABSTRACT

The present study aims to link the dynamics of geophysical fluid flows with their vortical structures in physical space and to study the transition of these structures due to the control parameters. The simulations are carried in a rectangular box filled with liquid gallium for three different cases, namely, Rayleigh–Bénard convection (RBC), magnetoconvection (MC) and rotating magnetoconvection (RMC). The physical setup and material properties are similar to those considered by Aurnou and Olson in their experimental work. The simulated results are validated with theoretical results of Chandrasekhar and experimental results of Aurnou and Olson. The results are also topologically verified with the help of Euler number given by Ma and Wang. For RBC, the onset is obtained at Ra greater than 1708 and at this Ra, the symmetric rolls are orientated in/along a horizontal axis. As the value of Ra increases further, the width of the horizontal rolls starts to amplify. It is observed that these two-dimensional rolls are nothing but the cross-sections of three-dimensional (3D) cylindrical rolls with wave structures. When the vertically imposed magnetic field is added to RBC, the onset of convection is delayed due to the effect of Lorentz force on the thermal buoyancy force. The presence of 3D rectangular structures is highlighted and analysed. When the magnetically influenced rectangular box rotates about vertical axis at low rotation rates in magnetoconvection model, the onset of convection gets further delayed by magnetic field, which is in general agreement with the theoretical predictions. The critical Ra increases linearly with magnetic field intensity. Coherent thermal oscillations are detected near the onset of convection, at moderate rotation rates.     

Application of the Lorenz equations for studying thermal convection in the lithosphere

Stationary solutions including wave solutions with constant amplitudes are found for nonlinear equations of thermal convection in a layer with nonlinear rheology. The solution is based on the Fourier expansion of unknown velocities and temperatures with only the first and first two terms retained in the velocity and temperature series, respectively. This method, which can be regarded as the Lorenz method, yields the Lorenz equations that fairly well describe the thermal convection in a layer with Newtonian rheology if the Rayleigh number is not very large. The obtained generalization of the Lorenz equations to the case of an integral (having a memory) nonlinear rheology implies that only the first term is retained in the Fourier series for the stress components, i.e., the nonlinear rheological equation is harmonically linearized. However, in the Fourier series of temperature, it is essential to keep the second term: this term, which is independent of the horizontal coordinate, models the thermal boundary layer that characterizes the developed convection. We constructed the bifurcation curves that describe the stationary convection in the nonlinear integral medium simulating the rheology of the mantle, and analyzed the stability of stationary convective flows. The Lorenz method is applied to study small-scale thermal convection in the lithosphere of the Earth.