Revisiting the compositions and volatile contents of olivine-hosted melt inclusions from the Mount Shasta region: implications for the formation of high-Mg andesites

Primitive chemical characteristics of high-Mg andesites (HMA) suggest equilibration with mantle wedge peridotite, and they may form through either shallow, wet partial melting of the mantle or re-equilibration of slab melts migrating through the wedge. We have re-examined a well-studied example of HMA from near Mt. Shasta, CA, because petrographic evidence for magma mixing has stimulated a recent debate over whether HMA magmas have a mantle origin. We examined naturally quenched, glassy, olivine-hosted (Fo_87–94) melt inclusions from this locality and analyzed the samples by FTIR, LA-ICPMS, and electron probe. Compositions (uncorrected for post-entrapment modification) are highly variable and can be divided into high-CaO (>10 wt%) melts only found in Fo > 91 olivines and low-CaO (<10 wt%) melts in Fo 87–94 olivine hosts. There is evidence for extensive post-entrapment modification in many inclusions. High-CaO inclusions experienced 1.4–3.5 wt% FeO^T loss through diffusive re-equilibration with the host olivine and 13–28 wt% post-entrapment olivine crystallization. Low-CaO inclusions experienced 1–16 wt% olivine crystallization with <2 wt% FeO^T loss experienced by inclusions in Fo > 90 olivines. Restored low-CaO melt inclusions are HMAs (57–61 wt% SiO₂; 4.9–10.9 wt% MgO), whereas high-CaO inclusions are primitive basaltic andesites (PBA) (51–56 wt% SiO₂; 9.8–15.1 wt% MgO). HMA and PBA inclusions have distinct trace element characteristics. Importantly, both types of inclusions are volatile-rich, with maximum values in HMA and PBA melt inclusions of 3.5 and 5.6 wt% H₂O, 830 and 2,900 ppm S, 1,590 and 2,580 ppm Cl, and 500 and 820 ppm CO₂, respectively. PBA melts are comparable to experimental hydrous melts in equilibrium with harzburgite. Two-component mixing between PBA and dacitic magma (59:41) is able to produce a primitive HMA composition, but the predicted mixture shows some small but significant major and trace element discrepancies from published whole-rock analyses from the Shasta locality. An alternative model that involves incorporation of xenocrysts (high-Mg olivine from PBA and pyroxenes from dacite) into a primary (mantle-derived) HMA magma can explain the phenocryst and melt inclusion compositions but is difficult to evaluate quantitatively because of the complex crystal populations. Our results suggest that a spectrum of mantle-derived melts, including both PBA and HMA, may be produced beneath the Shasta region. Compositional similarities between Shasta parental melts and boninites imply similar magma generation processes related to the presence of refractory harzburgite in the shallow mantle.     

Volatile content and degassing processes in the AD 79 magma chamber at Vesuvius (Italy)

The evolution of volatiles in the AD 79 magma chamber at Vesuvius (Italy) was investigated through the study of melt inclusions (MI) in crystals of different origins. FTIR spectroscopy and EMPA were used to measure H₂O, CO₂, S and Cl of the different melts. This allowed us to define the volatile content of the most evolved, phonolitic portion of the magma chamber and of the mafic melts feeding the chamber. MI in sanidine from phonolitic and tephri-phonolitic pumices show systematic differences in composition and volatile content, which can be explained by resorption of the host mineral during syn-eruptive mixing. The pre-eruption content of phonolitic magma appears to have been dominated by H₂O and Cl (respectively 6.0 to 6.5 wt% and 6700 ppm), while magma chamber refilling occurred through the repeated injection of H₂O, CO₂ and S-rich tephritic magmas (respectively 3%, 1500 ppm and 1400 ppm). Strong CO₂ degassing probably occurred during the decompressional path of mafic batches towards the magma chamber, while sulphur was probably released by the magma following crystallization and mixing processes. Water and chlorine strongly accumulated in the magma and reached their solubility limits only during the eruption. Chlorine solubility appears to have been strongly compositionally controlled, and Cl release was inhibited by groundmass crystallization of leucite, which shifted the composition of the residual liquid towards higher Cl solubilities. Received: 28 October 1999 / Accepted: 21 April 2000     

Sulphur solubility in andesitic to basaltic melts: implications for Hekla volcano

The solubility of sulphur in sulphide-saturated, H₂O-bearing basaltic–andesitic and basaltic melts from Hekla volcano (Iceland) has been determined experimentally at 1,050°C, 300 and 200 MPa, and redox conditions with oxygen fugacity (logfO₂) between QFM−1.2 and QFM+1.1 (QFM is a quartz–fayalite–magnetite oxygen buffer) in the systems containing various amounts of S and H₂O. The S content of the H₂O-rich glasses saturated with pyrrhotite decreases from 2,500 ppm in basalt to 1,500 ppm in basaltic andesite at the investigated conditions. Furthermore, the reduction of water content in the melt at pyrrhotite saturation and fixed T, P and redox conditions leads to a decrease in S concentration from 2,500 to 1,400 ppm for basaltic experiments (for H₂O decrease from 7.8 to 1.4 wt%) and from 1,500 to 900 ppm (for H₂O decrease from 6.7 to 1.7 wt%) for basaltic andesitic experiments. Our experimental data, combined with silicate melt inclusion investigations and the available models on sulphide saturation in mafic magmas, indicate that the parental basaltic melts of Hekla were not saturated with respect to sulphide. During magmatic differentiation, the S content in the residual melts increased and might have reached sulphide saturation with 2,500 ppm dissolved S. With further magma crystallization, the S concentration in the melt was controlled by the sulphide saturation of the magma, decreasing from ~2,500 to 900 ppm S.     

Electrical conductivity of hydrous basaltic melts: implications for partial melting in the upper mantle

The Earth’s uppermost asthenosphere is generally associated with low seismic wave velocity and high electrical conductivity. The electrical conductivity anomalies observed from magnetotelluric studies have been attributed to the hydration of mantle minerals, traces of carbonatite melt, or silicate melts. We report the electrical conductivity of both H₂O-bearing (0–6 wt% H₂O) and CO₂-bearing (0.5 wt% CO₂) basaltic melts at 2 GPa and 1,473–1,923 K measured using impedance spectroscopy in a piston-cylinder apparatus. CO₂ hardly affects conductivity at such a concentration level. The effect of water on the conductivity of basaltic melt is markedly larger than inferred from previous measurements on silicate melts of different composition. The conductivity of basaltic melts with more than 6 wt% of water approaches the values for carbonatites. Our data are reproduced within a factor of 1.1 by the equation log σ = 2.172 − (860.82 − 204.46 w ^0.5)/(T − 1146.8), where σ is the electrical conductivity in S/m, T is the temperature in K, and w is the H₂O content in wt%. We show that in a mantle with 125 ppm water and for a bulk water partition coefficient of 0.006 between minerals and melt, 2 vol% of melt will account for the observed electrical conductivity in the seismic low-velocity zone. However, for plausible higher water contents, stronger water partitioning into the melt or melt segregation in tube-like structures, even less than 1 vol% of hydrous melt, may be sufficient to produce the observed conductivity. We also show that ~1 vol% of hydrous melts are likely to be stable in the low-velocity zone, if the uncertainties in mantle water contents, in water partition coefficients, and in the effect of water on the melting point of peridotite are properly considered.     

Water and other volatile systematics of olivine-hosted melt inclusions from the Yellowstone hotspot track

Major oxide, trace element and volatile (H₂O, CO₂, S, F, and Cl) compositions have been analyzed for olivine-hosted melt inclusions in eight basalt samples from Yellowstone National Park and the Snake River Plain (SRP) to identify the least differentiated melt compositions and assess the volatile budget of the Yellowstone hotspot. Melt-inclusion chemistry was evaluated to understand potential overprinting effects in the shallow mantle and crust of magmas derived from deeper levels. Maximum water concentrations of 3.3 wt% and CO₂ up to 1,677 ppm have been observed in olivine-hosted melt inclusions from the Gerritt Basalts at Mesa Falls, Idaho (SRP region), which is significantly higher than the maximum concentrations measured in lavas from other hotspots such as Hawaii (~0.8–0.9 wt%). Maximum water concentrations were generally observed in the least differentiated melt inclusions in terms of incompatible major oxide concentrations, indicating that high water concentrations are characteristic of the mantle or perhaps lower crust rather than resulting from differentiation enhancement within the shallow crust, even taking into account the fact that water behaves as an incompatible element during crystal fractionation. Enrichment in Ba coupled with depletion in Th in many of the melt inclusions and their host rocks is a characteristic of many arc lavas and may indicate that volatiles in Yellowstone-Snake River Plain basalts could have a subduction zone origin.     

Strong tin enrichment in a pegmatite-forming melt

To investigate processes of magmatic tin enrichment and cassiterite deposition, we studied the abundances of major, trace, and volatile elements in a large number of rehomogenized silicate melt inclusions in quartz and topaz from a pegmatite body at the Ehrenfriedersdorf Sn–W deposit. This deposit is associated with evolved Variscan granites of the central Erzgebirge, southeast Germany. The melt inclusions are peraluminous; the molar aluminum saturation index (ASI) ranges from 1.15 to 2.0, and many inclusions are characterized by a very high content of fluxing components and volatiles. Some inclusions contain more than 20 wt% of H₂O, F, Cl, and P₂O₅, plus Li as well as very high levels of Sn. Some rare, highly evolved fractions of late-stage pegmatite-forming liquid at Ehrenfriedersdorf contained up to 7000 ppm Sn. The presence of hydrogen and methane in addition to water and carbon dioxide in the vapor phase of the melt inclusions suggests a very low oxygen fugacity for some fractions of magma. The extreme levels of tin, volatiles, and fluxing components in this magma had an important influence on processes of melt movement and cassiterite precipitation. Melts, like these, that are high in volatiles and alkalis (sum of Li₂O, Na₂O, K₂O, Rb₂O, and Cs₂O is >8 wt%) have low densities (≤1.8 g/cm³), low viscosities (<10 Pa.s at 700 °C), facilitate relatively rapid diffusion of ions through melts, and hence are excellent solvents for extracting and transporting ore-forming elements. Received: 1 February 1999 / Accepted: 19 January 2000     

The origin of hydrous,high-δ<Superscript>18</Superscript>O voluminous volcanism: diverse oxygen isotope values and high magmatic water contents within the volcanic record of Klyuchevskoy volcano,Kamchatka, Russia

Klyuchevskoy volcano, in Kamchatka’s subduction zone, is one of the most active arc volcanoes in the world and contains some of the highest δ¹⁸O values for olivines and basalts. We present an oxygen isotope and melt inclusion study of olivine phenocrysts in conjunction with major and trace element analyses of ¹⁴C- and tephrochronologically-dated tephra layers and lavas spanning the eruptive history of Klyuchevskoy. Whole-rock and groundmass analyses of tephra layers and lava samples demonstrate that both high-Mg (7–12.5 wt% MgO) and high-Al (17–19 wt% Al₂O₃, 3–6.5 wt% MgO) basalt and basaltic andesite erupted coevally from the central vent and flank cones. Individual and bulk olivine δ¹⁸O range from normal MORB values of 5.1‰ to values as high as 7.6‰. Likewise, tephra and lava matrix glass have high-δ¹⁸O values of 5.8–8.1‰. High-Al basalts dominate volumetrically in Klyuchevskoy’s volcanic record and are mostly high in δ¹⁸O. High-δ¹⁸O olivines and more normal-δ¹⁸O olivines occur in both high-Mg and high-Al samples. Most olivines in either high-Al or high-Mg basalts are not in oxygen isotopic equilibrium with their host glasses, and Δ¹⁸O_{olivine–glass} values are out of equilibrium by up to 1.5‰. Olivines are also out of Fe–Mg equilibrium with the host glasses, but to a lesser extent. Water concentrations in olivine-hosted melt inclusions from five tephra samples range from 0.4 to 7.1 wt%. Melt inclusion CO₂ concentrations vary from below detection (<50 ppm) to 1,900 ppm. These values indicate depths of crystallization up to ~17 km (5 kbar). The variable H₂O and CO₂ concentrations likely reflect crystallization of olivine and entrapment of inclusions in ascending and degassing magma. Oxygen isotope and Fe–Mg disequilibria together with melt inclusion data indicate that olivine was mixed and recycled between high-Al and high-Mg basaltic melts and cumulates, and Fe–Mg and δ¹⁸O re-equilibration processes were incomplete. Major and trace elements in the variably high-δ¹⁸O olivines suggest a peridotite source for the parental magmas. Voluminous, highest in the world with respect to δ¹⁸O, and hydrous basic volcanism in Klyuchevskoy and other Central Kamchatka depression volcanoes is explained by a model in which the ascending primitive melts that resulted from the hydrous melt fluxing of mantle wedge peridotite, interacted with the shallow high-δ¹⁸O lithospheric mantle that had been extensively hydrated during earlier times when it was part of the Kamchatka forearc. Following accretion of the Eastern Peninsula terrains several million years ago, a trench jump eastward caused the old forearc mantle to be beneath the presently active arc. Variable interaction of ascending flux-melting-derived melts with this older, high-δ¹⁸O lithospheric mantle has produced mafic parental magmas with a spectrum of δ¹⁸O values. Differentiation of the higher δ¹⁸O parental magmas has created the volumetrically dominant high-Al basalt series. Both basalt types incessantly rise and mix between themselves and with variable in δ¹⁸O cumulates within dynamic Klyuchevskoy magma plumbing system, causing biannual eruptions and heterogeneous magma products. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Mixing and differentiation in the Oruanui rhyolitic magma, Taupo, New Zealand: evidence from volatiles and trace elements in melt inclusions

Large pyroclastic rhyolites are snapshots of evolving magma bodies, and preserved in their eruptive pyroclasts is a record of evolution up to the time of eruption. Here we focus on the conditions and processes in the Oruanui magma that erupted at 26.5 ka from Taupo Volcano, New Zealand. The 530 km³ (void-free) of material erupted in the Oruanui event is comparable in size to the Bishop Tuff in California, but differs in that rhyolitic pumice and glass compositions, although variable, did not change systematically with eruption order. We measured the concentrations of H₂O, CO₂ and major and trace elements in zoned phenocrysts and melt inclusions from individual pumice clasts covering the range from early to late erupted units. We also used cathodoluminescence imaging to infer growth histories of quartz phenocrysts. For quartz-hosted inclusions, we studied both fully enclosed melt inclusions and reentrants (connecting to host melt through a small opening). The textures and compositions of inclusions and phenocrysts reflect complex pre-eruptive processes of incomplete assimilation/partial melting, crystallization differentiation, magma mixing and gas saturation. ‘Restitic’ quartz occurs in seven of eight pumice clasts studied. Variations in dissolved H₂O and CO₂ in quartz-hosted melt inclusions reflect gas saturation in the Oruanui magma and crystallization depths of ∼3.5–7 km. Based on variations of dissolved H₂O and CO₂ in reentrants, the amount of exsolved gas at the beginning of eruption increased with depth, corresponding to decreasing density with depth. Pre-eruptive mixing of magma with varying gas content implies variations in magma bulk density that would have driven convective mixing. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

The 1783 Lakagigar eruption in Iceland: geochemistry,CO2 and sulfur degassing

About 12.3 km³ of basaltic magma were erupted from the Lakagigar fissure in Iceland in 1783, which may have been derived from the high-level reservoir of Grimsvotn central volcano, by lateral flow within the rifted crust. We have studied the petrology of quenched, glassy tephra from sections through pyroclastic cones along the fissure. The chemical composition of matrix glass of the 1783 tephra is heterogeneous and ranges from olivine tholeiite to Fe–Ti rich basalt, but the most common magma erupted is quartz tholeiite (Mg#43.6 to 37.2). The tephra are characterized by low crystal content (5 to 9 vol%). Glass inclusions trapped in plagioclase and Fo₈₆ to Fo₇₅ olivine phenocrysts show a large range of compositions, from primitive olivine tholeiite (Mg#64.3), quartz tholeiite (Mg#43–37), to Fe–Ti basalts (Mg#33.5) which represent the most differentiated liquids and are trapped as rare melt inclusions in clinopyroxene. Both matrix glass and melt inclusion data indicate a chemically heterogeneous magma reservoir, with quartz tholeiite dominant. LREE-depleted olivine-tholeiite melt-inclusions in Mg-rich olivine and anorthitic-plagioclase phenocrysts may represent primitive magma batches ascending into the reservoir at the time of the eruption. Vesicularity of matrix glasses correlates with differentiation, ranging from 10 to 60 vol.% in evolved quartz-tholeiite glasses, whereas olivine-tholeiite glasses contain less than 10 vol.% vesicles. FTIR analyses of olivine-tholeiite melt-inclusions indicate concentrations of 0.47 wt% H₂O and 430 to 510 ppm for CO₂. Chlorine in glass inclusions and matrix glasses increases from 50 ppm in primitive tholeiite to 230 ppm in Fe–Ti basalts, without clear evidence of degassing. Melt inclusion analyses show that sulfur varies from 915 ppm to 1970 ppm, as total FeO^* increases from 9 to 13.5 wt%. Sulfur degassing correlates both with vesicularity and magma composition. Thus sulfur in matrix glasses decreases from 1490 ppm to 500 ppm, as Mg # decreases from 47 to 37 and vesicularity of the magma strongly increases. These results indicate loss of at least 75% of sulfur during the eruption. The correlation of low sulfur content in matrix glasses with high vesicularity is regarded as evidence of the control of a major exsolving volatile phase on the degassing efficiency of the magma. Our model is consistent a quasi-permanent CO₂ flux through the shallow-level magmatic reservoir of Grimsvotn. Following magma withdrawal from the reservoir and during eruption from the Lakagigar fissure, sulfur degassing was controlled by inherent CO₂-induced vesicularity of the magma.     

Deep pre-eruptive storage of silicic magmas feeding Plinian and dome-forming eruptions of central and northern Dominica (Lesser Antilles) inferred from volatile contents of melt inclusions

Volatiles contribute to magma ascent through the sub-volcanic plumbing system. Here, we investigate melt inclusion compositions in terms of major and trace elements, as well as volatiles (H₂O, CO₂, SO₂, F, Cl, Br, S) for Quaternary Plinian and dome-forming dacite and andesite eruptions in the central and the northern part of Dominica (Lesser Antilles arc). Melt inclusions, hosted in orthopyroxene, clinopyroxene and plagioclase are consistently rhyolitic. Post-entrapment crystallisation effects are limited, and negligible in orthopyroxene-hosted inclusions. Melt inclusions are among the most water-rich yet recorded (≤?8 wt% H₂O). CO₂ contents are generally low (<?650 ppm), although in general the highest pressure melt inclusion contain the highest CO₂. Some low-pressure (<?3 kbars) inclusions have elevated CO₂ (up to 1100–1150 ppm), suggestive of fluxing of shallow magmas with CO₂-rich fluids. CO₂-trace element systematics indicate that melts were volatile-saturated at the time of entrapment and can be used for volatile-saturation barometry. The calculated pressure range (0.8–7.5 kbars) indicates that magmas originate from a vertically-extensive (3–27 km depth) storage zone within the crust that may extend to the sub-Dominica Moho (28 km). The vertically-extensive crustal system is consistent with mush models for sub-volcanic arc crust wherein mantle-derived mafic magmas undergo differentiation over a range of crustal depths. The other volatile range of composition for melt inclusions from the central part is F (75–557 ppm), Cl (1525–3137 ppm), Br (6.1–15.4 ppm) and SO₂ (<?140 ppm), and for the northern part it’s F (92–798 ppm), Cl (1506–4428 ppm), Br (not determined) and SO₂ (<?569; one value at 1015 ppm). All MIs, regardless of provenance, describe the same Cl/F correlation (8.3?±?2.7), indicating that the magma source at depth is similar. The high H₂O content of Dominica magmas has implications for hazard assessment.     

Compositional and thermal evolution of olivine-hosted melt inclusions in small-volume basaltic eruptions: a “simple” example from Dotsero Volcano,NW Colorado

Olivine-hosted melt inclusions have been analyzed from the young (4,150 ± 300 ybp) Dotsero basaltic (48.2 wt% SiO₂) lava flow in Northwest Colorado, USA. Silicate melt-inclusion compositions have a bimodal distribution (41–46 wt% SiO₂ and 47–50 wt% SiO₂). Low-Si melt inclusions record high pre-eruptive sulfur concentrations (>1,000 ppm S) and variations in their major- and trace-element compositions appears to be related to shallow assimilation of local basement sandstone. Whole-rock compositions are modeled as a contamination of low-Si inclusion compositions with ~10 wt% sandstone. Host olivine crystallization may have accompanied magma injection into a shallow storage chamber. In contrast to the low-Si melt inclusions, the high-Si population is relatively degassed and records late-stage rapid crystallization either during or post-eruption. Hopper or skeletal olivine grains in conjunction with the bimodal inclusion compositions suggest relatively rapid cooling rates at the time of eruption and inclusion entrapment. Inclusion compositions, in conjunction with mineral textures, therefore provide a more complete picture of shallow magma processes, coupling the relative timing of undercooling and crystallization, assimilation and melt compositional evolution. Most of the inclusion and host textural and compositional data indicates late and very shallow petrogenetic processes and does not appear to record deeper (mid-, lower-crustal) processes.     

Fluid and melt inclusions in the Mesozoic Fangcheng basalt from North China Craton: implications for magma evolution and fluid/melt-peridotite reaction

Melt inclusions and fluid inclusions in the Fangcheng basalt were investigated to understand the magma evolution and fluid/melt-peridotite interaction. Primary silicate melt inclusions were trapped in clinopyroxene and orthopyroxene phenocrysts in the Fangcheng basalt. Three types of melt inclusions (silicate, carbonate, and sulfide) coexisting with fluid inclusions occur in clinopyroxene xenocrysts and clinopyroxene in clinopyroxenite xenoliths. In situ laser-ablation ICP-MS analyses of major and trace element compositions on individual melt inclusions suggest that the silicate melt inclusions in clinopyroxene and orthopyroxene phenocrysts were trapped from the same basaltic magma. The decoupling of major and trace elements in the melt inclusions indicates that the magma evolution was controlled by melt crystallization and contamination from entrapped ultramafic xenoliths. Trace element patterns of melt inclusions are similar to those of the average crust of North China Craton and Yangtze Craton, suggesting a considerable crustal contribution to the magma source. Calculated parental melt of the Fangcheng basalt has features of low MgO (5.96 wt%), high Al₂O₃ (16.81 wt%), Sr (1,670 ppm), Y (>35 ppm), and high Sr/Y (>40), implying that subducted crustal material was involved in the genesis of the Fangcheng basalt. The coexisting fluid and melt inclusions in clinopyroxene xenocrysts and in clinopyroxene of xenoliths record a rare melt-peridotite reaction, that is olivine + carbonatitic melt₁ (rich in Ca) = clinopyroxene + melt₂ ± CO₂. The produced melt₂ is enriched in LREE and CO₂ and may fertilize the mantle significantly, which we consider to be the cause for the rapid replacement of lithospheric mantle during the Mesozoic in the region.     

Hydrogen partitioning between melt,clinopyroxene, and garnet at 3 GPa in a hydrous MORB with 6 wt.% H<Subscript>2</Subscript>O

To understand partitioning of hydrogen between hydrous basaltic and andesitic liquids and coexisting clinopyroxene and garnet, experiments using a mid-ocean ridge basalt (MORB) + 6 wt.% H₂O were conducted at 3 GPa and 1,150–1,325°C. These included both isothermal and controlled cooling rate crystallization experiments, as crystals from the former were too small for ion microprobe (SIMS) analyses. Three runs at lower bulk water content are also reported. H₂O was measured in minerals by SIMS and in glasses by SIMS, Fourier Transform infrared spectroscopy (FTIR), and from oxide totals of electron microprobe (EMP) analyses. At 3 GPa, the liquidus for MORB with 6 wt.% H₂O is between 1,300 and 1,325°C. In the temperature interval investigated, the melt proportion varies from 100 to 45% and the modes of garnet and clinopyroxene are nearly equal. Liquid composition varies from basaltic to andesitic. The crystallization experiments starting from above the liquidus failed to nucleate garnets, but those starting from below the liquidus crystallized both garnet and clinopyroxene. SIMS analyses of glasses with >7 wt.% H₂O yield spuriously low concentrations, perhaps owing to hydrogen degassing in the ultra-high vacuum of the ion microprobe sample chamber. FTIR and EMP analyses show that the glasses have 3.4 to 11.9 wt.% water, whilst SIMS analyses indicate that clinopyroxenes have 1,340–2,330 ppm and garnets have 98–209 ppm H₂O. D _H ^cpx−gt is 11 ± 3, D _H ^cpx−melt is 0.023 ± 0.005 and D _H ^gt−melt is 0.0018 ± 0.0006. Most garnet/melt pairs have low values of D _H ^gt−melt, but D _H ^gt−melt increases with TiO₂ in the garnet. As also found by previous studies, values of D _H ^cpx−melt increase with Al₂O₃ of the crystal. For garnet pyroxenite, estimated values of D _H ^{pyroxenite−melt} decrease from 0.015 at 2.5 GPa to 0.0089 at 5 GPa. Hydration will increase the depth interval between pyroxenite and peridotite solidi for mantle upwelling beneath ridges or oceanic islands. This is partly because the greater pyroxene/olivine ratio in pyroxenite will tend to enhance the H₂O concentration of pyroxenite, assuming that neighboring pyroxenite and peridotite bodies have similar H₂O in their pyroxenes. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Sixty thousand years of magmatic volatile history before the caldera-forming eruption of Mount Mazama, Crater Lake, Oregon

The well-documented eruptive history of Mount Mazama, Oregon, provides an excellent opportunity to use pre-eruptive volatile concentrations to study the growth of an explosive silicic magmatic system. Melt inclusions (MI) hosted in pyroxene and plagioclase crystals from eight dacitic–rhyodacitic eruptive deposits (71–7.7?ka) were analyzed to determine variations in volatile-element concentrations and changes in magma storage conditions leading up to and including the climactic eruption of Crater Lake caldera. Temperatures (Fe–Ti oxides) increased through the series of dacites, then decreased, and increased again through the rhyodacites (918–968 to ~950 to 845–895?°C). Oxygen fugacity began at nickel–nickel-oxide buffer (NNO) +0.8 (71?ka), dropped slightly to NNO +0.3, and then climbed to its highest value with the climactic eruption (7.7?ka) at NNO +1.1 log units. In parallel with oxidation state, maximum MI sulfur concentrations were high early in the eruptive sequence (~500?ppm), decreased (to ~200?ppm), and then increased again with the climactic eruption (~500?ppm). Maximum MI sulfur correlates with the Sr content (as a proxy for LREE, Ba, Rb, P₂O₅) of recharge magmas, represented by basaltic andesitic to andesitic enclaves and similar-aged lavas. These results suggest that oxidized Sr-rich recharge magmas dominated early and late in the development of the pre-climactic dacite–rhyodacite system. Dissolved H₂O concentrations in MI do not, however, correlate with these changes in dominant recharge magma, instead recording vapor solubility relations in the developing shallow magma storage and conduit region. Dissolved H₂O concentrations form two populations through time: the first at 3–4.6 wt% (with a few extreme values up to 6.1 wt%) and the second at ≤2.4 wt%. CO₂ concentrations measured in a subset of these inclusions reach up to 240?ppm in early-erupted deposits (71?ka) and are below detection in climactic deposits (7.7?ka). Combined H₂O and CO₂ concentrations and solubility models indicate a dominant storage region at 4–7?km (up to 12?km), with drier inclusions that diffusively re-equilibrated and/or were trapped at shallower depths. Boron and Cl (except in the climactic deposit) largely remained in the melt, suggesting vapor–melt partition coefficients and gas fractions were low. Modeled Li, F, and S vapor–melt partition coefficients are higher than those of B and Cl. The decrease in maximum MI CO₂ concentration following the earliest dacitic eruptions is interpreted to result from a broadening of the shallow storage region to greater than the diameter of subjacent feeders, so that greater proportions of reservoir magma were to the side of CO₂-bearing vapor bubbles ascending vertically from the locus of recharge magma injection, thereby escaping recarbonation by streaming vapor bubbles. The Mazama melt inclusions provide a picture of a growing magma storage region, where chemical variations in melt and magma occur due to changes in the nature and supply rate of magma recharge, the timing of degassing, and the possible degree of equilibration with gases from below.     

Pre-eruptive melt composition and constraints on degassing of a water-rich pantellerite magma,Fantale volcano,Ethiopia

To determine the pre-eruptive composition of peralkaline magma at Frantale volcano, Ethiopia, we have studied glass inclusions in phenocrysts from a lateceupting, glassy pantelleritic lava flow. Matrix glass and crystal-free glass inclusions in quartz were analyzed for all major and most minor elements by electron microprobe and for H₂O and 15 lithophile trace elements by ion microprobe (SIMS). Compositions of inclusions may have been slightly modified by post-trapping quartz crystallization, the average concentrations of all constituents but silica may be artificially high by 10% relative. Glass inclusions contain extreme enrichments in H₂O (mean of 4.6 to 4.9 wt%) and several lithophile trace elements, which suggest that the lava erupted from a highly evolved, water-rich fraction of magma. The pre-eruptive concentration of water was much higher than that generally considered to occur in pantellerite magmas. Trends observed for lithophile elements in whole-rock samples from pre-,syn-and post-caldera eruptive units are mimicked in glass inclusions from the studied pantellerite lava; concentrations of Rb, Y, Zr, Nb, and Ce±Cl increase with progressive differentiation. With the exception of Cl and H₂O contents, the composition of matrix glass is similar to that of glass inclusions suggesting: that few constituents exsolved from magma or cooling glass; eruption and quench of the lava occurred rapidly; and the matrix glass is, largely, compositionally representative of melt. Higher average abundances of Cl and H₂O in glass inclusions suggest that these volatiles exsolved after melt entrapment; degassing could have occurred as either an equilibrium or disequilibrium process.     

Anatexis and fluid regime of the deep continental crust: New clues from melt and fluid inclusions in metapelitic migmatites from Ivrea Zone (NW Italy)

We investigate the inclusions hosted in peritectic garnet from metapelitic migmatites of the Kinzigite Formation (Ivrea Zone, NW Italy) to evaluate the starting composition of the anatectic melt and fluid regime during anatexis throughout the upper amphibolite facies, transition, and granulite facies zones. Inclusions have negative crystal shapes, sizes from 2 to 10 μm and are regularly distributed in the core of the garnet. Microstructural and micro‐Raman investigations indicate the presence of two types of inclusions: crystallized silicate melt inclusions (i.e., nanogranitoids, NI), and fluid inclusions (FI). Microstructural evidence suggests that FI and NI coexist in the same cluster and are primary (i.e., were trapped simultaneously during garnet growth). FI have similar compositions in the three zones and comprise variable proportions of CO₂, CH₄, and N₂, commonly with siderite, pyrophyllite, and kaolinite, suggesting a COHN composition of the trapped fluid. The mineral assemblage in the NI contains K‐feldspar, plagioclase, quartz, biotite, muscovite, chlorite, graphite and, rarely, calcite. Polymorphs such as kumdykolite, cristobalite, tridymite, and less commonly kokchetavite, were also found. Rehomogenized NI from the different zones show that all the melts are leucogranitic but have slightly different compositions. In samples from the upper amphibolite facies, melts are less mafic (FeO + MgO = 2.0–3.4 wt%), contain 860–1700 ppm CO₂ and reach the highest H₂O contents (6.5–10 wt%). In the transition zone melts have intermediate H₂O (4.8–8.5 wt%), CO₂ (457–1534 ppm) and maficity (FeO + MgO = 2.3–3.9 wt%). In contrast, melts at granulite facies reach highest CaO, FeO + MgO (3.2–4.7 wt%), and CO₂ (up to 2,400 ppm), with H₂O contents comparable (5.4–8.3 wt%) to the other two zones. Our results represent the first clear evidence for carbonic fluid‐present melting in the Ivrea Zone. Anatexis of metapelites occurred through muscovite and biotite breakdown melting in the presence of a COH fluid, in a situation of fluid–melt immiscibility. The fluid is assumed to have been internally derived, produced initially by devolatilization of hydrous silicates in the graphitic protolith, then as a result of oxidation of carbon by consumption of Fe³⁺‐bearing biotite during melting. Variations in the compositions of the melts are interpreted to result from higher T of melting. The H₂O contents of the melts throughout the three zones are higher than usually assumed for initial H₂O contents of anatectic melts. The CO₂ contents are highest at granulite facies, and show that carbon‐contents of crustal magmas are not negligible at high T. The activity of H₂O of the fluid dissolved in granitic melts decreases with increasing metamorphic grade. Carbonic fluid‐present melting of the deep continental crust represents, together with hydrate‐breakdown melting reactions, an important process in the origin of crustal anatectic granitoids.     

Garnet-bearing tonalitic porphyry from East Kunlun,Northeast Tibetan Plateau: implications for adakite and magmas from the MASH Zone

A garnet-bearing tonalitic porphyry from the Achiq Kol area, northeast Tibetan Plateau has been dated by SHRIMP U-Pb zircon techniques and gives a Late Triassic age of 213 ± 3 Ma. The porphyry contains phenocrysts of Ca-rich, Mn-poor garnet (CaO > 5 wt%; MnO < 3 wt%), Al-rich hornblende (Al₂O₃ ~ 15.9 wt%), plagioclase and quartz, and pressure estimates for hornblende enclosing the garnet phenocrysts yield values of 8–10 kbar, indicating a minimum pressure for the garnet. The rock has SiO₂ of 60–63 wt%, low MgO (<2.0 wt%), K₂O (<1.3 wt%), but high Al₂O₃ (>17 wt%) contents, and is metaluminous to slightly peraluminous (ACNK = 0.89–1.05). The rock samples are enriched in LILE and LREE but depleted in Nb and Ti, showing typical features of subduction-related magmas. The relatively high Sr/Y (~38) ratios and low HREE (Yb < 0.8 ppm) contents suggest that garnet is a residual phase, while suppressed crystallization of plagioclase and lack of negative Eu anomalies indicate a high water fugacity in the magma. Nd–Sr isotope compositions of the rock (εNd_T = −1.38 to −2.33; ⁸⁷Sr/⁸⁶Sr_i = 0.7065–0.7067) suggest that both mantle- and crust-derived materials were involved in the petrogenesis, which is consistent with the reverse compositional zoning of plagioclase, interpreted to indicate magma mixing. Both garnet phenocrysts and their ilmenite inclusions contain low MgO contents which, in combination with the oxygen isotope composition of garnet separates (+6.23‰), suggests that these minerals formed in a lower crust-derived felsic melt probably in the MASH zone. Although the rock samples are similar to adakitic rocks in many aspects, their moderate Sr contents (<260 ppm) and La/Yb ratios (mostly 16–21) are significantly lower than those of adakitic rocks. Because of high partition coefficients for Sr and LREE, fractionation of apatite at an early stage in the evolution of the magma may have effectively decreased both Sr and LREE in the residual melt. It is suggested that extensive crystallization of apatite as an early phase may prevent some arc magmas from evolving into adakitic rocks even under high water fugacity.     

Role of cryptic amphibole crystallization in magma differentiation at Hudson volcano, Southern Volcanic Zone, Chile

Hudson volcano (Chile) is the southern most stratovolcano of the Andean Southern Volcanic Zone and has produced some of the largest Holocene eruptions in South America. There have been at least 12 recorded Holocene explosive events at Hudson, with the 6700 years BP, 3600 years BP, and 1991 eruptions the largest of these. Hudson volcano has consistently discharged magmas of similar trachyandesitic and trachydacitic composition, with comparable anhydrous phenocryst assemblages, and pre-eruptive temperatures and oxygen fugacities. Pre-eruptive storage conditions for the three largest Holocene events have been estimated using mineral geothermometry, melt inclusion volatile contents, and comparisons to analogous high pressure experiments. Throughout the Holocene, storage of the trachyandesitic magmas occurred at depths between 0.2 and 2.7 km at approximately ~972°C (±25) and log fO₂ −10.33–10.24 (±0.2) (one log unit above the NNO buffer), with between 1 and 3 wt% H₂O in the melt. Pre-eruptive storage of the trachydacitic magma occurred between 1.1 and 2.0 km, at ~942°C (±26) and log fO₂ −10.68 (±0.2), with ~2.5 wt% H₂O in the melt. The evolved trachyandesitic and trachydacitic magmas can be derived from a basaltic parent primarily via fractional crystallization. Entrapment pressures estimated from plagioclase-hosted melt inclusions suggest relatively shallow levels of crystallization. However, trace element data (e.g., Dy/Yb ratio trends) suggests amphibole played an important role in the differentiation of the Hudson magmas, and this fractionation is likely to have occurred at depths >6 km. The absence of a garnet signal in the Hudson trace element data, the potential staging point for differentiation of parental mafic magmas [i.e., ~20 km (e.g., Annen et al. in J Petrol 47(3):505–539, 2006)], and the inferred amphibolite facies [~24 km (e.g., Rudnick and Fountain in Rev Geophys 33:267–309, 1995)] combine to place some constraint on the lower limit of depth of differentiation (i.e., ~20–24 km). These constraints suggest that differentiation of mantle-derived magmas occurred at upper-mid to lower crustal levels and involved a hydrous mineral assemblage that included amphibole, and generated a basaltic to basaltic andesitic composition similar to the magma discharged during the first phase of the 1991 eruption. Continued fractionation at this depth resulted in the formation of the trachyandesitic and trachydacitic compositions. These more evolved magmas ascended and stalled in the shallow crust, as suggested by the pressures of entrapment obtained from the melt inclusions. The decrease in pressure that accompanied ascent, combined with the potential heating of the magma body through decompression-induced crystallization would cause the magma to cross out of the amphibole stability field. Further shallow crystallization involved an anhydrous mineral assemblage and may explain the lack of phenocrystic amphibole in the Hudson suite.     

Shallow-level decompression crystallisation and deep magma supply at Shiveluch Volcano

Recent petrological studies indicate that some crustal magma chambers may be built up slowly by the intermittent ascent and amalgamation of small packets of magma generated in a deep-seated source region. Despite having little effect on whole-rock compositions, this process should be detectable as variable melt trace element composition, preserved as melt inclusions trapped in phenocrysts. We studied trace element and H₂O contents of plagioclase- and hornblende-hosted melt inclusions from andesite lavas and pumices of Shiveluch Volcano, Kamchatka. Melt inclusions are significantly more evolved than the whole rocks, indicating that the whole rocks contain a significant proportion of recycled foreign material. H₂O concentrations indicate trapping at a wide range of pressures, consistent with shallow decompression-driven crystallisation. The variation of trace element concentrations indicates up to ∼30% decompression crystallisation, which accounts for crystallisation of the groundmass and rims on phenocrysts. Trace element scatter could be explained by episodic stalling during shallow magma ascent, allowing incompatible element concentrations to increase during isobaric crystallisation. Enrichment of Li at intermediate pH₂O reflects influx and condensation of metal-rich vapours. A set of “exotic melts”, identified by their anomalous incompatible trace element characteristics, indicate variable source chemistry. This is consistent with evolution of individual magma batches with small differences in trace element chemistry, and intermittent ascent of magma pulses. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Carbonatite melt inclusions in coexisting magnetite,apatite and monticellite in Kerimasi calciocarbonatite,Tanzania: melt evolution and petrogenesis

Kerimasi calciocarbonatite consists principally of calcite together with lesser apatite, magnetite, and monticellite. Calcite hosts fluid and S-bearing Na–K–Ca-carbonate inclusions. Carbonatite melt and fluid inclusions occur in apatite and magnetite, and silicate melt inclusions in magnetite. This study presents statistically significant compositional data for quenched S- and P-bearing, Ca-alkali-rich carbonatite melt inclusions in magnetite and apatite. Magnetite-hosted silicate melts are peralkaline with normative sodium-metasilicate. On the basis of our microthermometric results on apatite-hosted melt inclusions and forsterite–monticellite phase relationships, temperatures of the early stage of magma evolution are estimated to be 900–1,000°C. At this time three immiscible liquid phases coexisted: (1) a Ca-rich, P-, S- and alkali-bearing carbonatite melt, (2) a Mg- and Fe-rich, peralkaline silicate melt, and (3) a C–O–H–S-alkali fluid. During the development of coexisting carbonatite and silicate melts, the Si/Al and Mg/Fe ratio of the silicate melt decreased with contemporaneous increase in alkalis due to olivine fractionation, whereas the alkali content of the carbonatite melt increased with concomitant decrease in CaO resulting from calcite fractionation. Overall the peralkalinity of the bulk composition of the immiscible melts increased, resulting in a decrease in the size of the miscibility gap in the pseudoquaternary system studied. Inclusion data indicate the formation of a carbonatite magma that is extremely enriched in alkalis with a composition similar to that of Oldoinyo Lengai natrocarbonatite. In contrast to the bulk compositions of calciocarbonatite rocks, the melt inclusions investigated contain significant amount of alkalis (Na₂O + K₂O) that is at least 5–10 wt%. The compositions of carbonatite melt inclusions are considered as being better representatives of parental magma composition than those of any bulk rock.