鄂尔多斯盆地马家沟组白云岩成因及其储集性能

对鄂尔多斯盆地下奥陶统马家沟组野外剖面、钻井岩心和铸体薄片的观察以及地球化学分析及岩石物性测试,马家沟组白云岩可分为泥微晶白云岩、晶粒白云岩和溶蚀残余白云岩三大类。泥微晶白云岩常有石膏伴生,Sr含量较高,其稀土配分模式及δ13C分布区间等特征与本区的泥微晶灰岩相似,包裹体均一温度接近地表温度,为近地表与海水相关流体准同生白云石化。晶粒白云岩的伴生矿物少,Sr含量低,其稀土配分模式及δ13C分布区间与本区的泥微晶灰岩相近,包裹体均一温度较高,为与海水相关流体埋藏白云石化。溶蚀残余白云岩为前两类白云岩受后期大气淡水改造而成。晶间孔、晶间溶孔、溶孔为马家沟组白云岩的主要储集空间。泥微晶白云岩的孔隙度、渗透率均较低,难构成储层;晶粒白云岩的孔隙度和渗透率较高,可成为良好储层;而溶蚀残余白云岩具高孔高渗特征,为优质储集岩类。盆地中东部、东南部、南部及天环地区是白云岩型储层勘探的重点区域。     

鄂尔多斯盆地马家沟组白云岩稀土元素地球化学特征

稀土元素具良好的地球化学过程示踪性,且受成岩流体影响小,在分析白云岩化流体性质和白云岩化成岩环境方面具有独特效果。采用中子活化法对鄂尔多斯盆地马家沟组白云岩稀土元素地球化学特征进行研究。结果表明:泥微晶白云岩REE质量分数为(2.907～140.09)×10-6,平均为46.917×10-6,低于泥晶灰岩中的含量,δEu平均为0.634,δCe平均为0.942,配分模式与泥晶灰岩相似,显示该类白云岩形成于低温氧化环境,白云岩化流体为海水或海源流体,可能为准同生白云岩化;晶粒白云岩REE质量分数为(3.392～18.435)×10-6,平均为8.788×10-6,远小于海相泥晶灰岩,δEu平均为0.724,δCe平均为0.78,配分模式与泥晶灰岩相似,且与泥微晶白云岩趋于一致,说明其形成于相对高温还原环境,白云岩化流体为海源流体,可能为埋藏白云岩化;溶蚀残余白云岩REE含量高,配分模式与泥晶灰岩不同且不具Eu正异常,指示岩溶流体可能为大气淡水。     

川西地区中二叠统栖霞组白云岩成因分析

川西地区栖霞组白云岩成因及其与峨眉山玄武岩喷发热事件关系颇有争论。在野外剖面、岩心观察基础上,通过岩石学、全岩及矿物微区地球化学分析方法对其研究,结果表明川西地区栖霞组白云岩（石）可分为残余砂屑白云岩、晶粒白云岩以及鞍状白云石、脉体充填白云石四类。残余砂屑白云岩与晶粒白云岩均呈块状,阴极发光较暗,稀土配分模式与泥微晶灰岩相似,δ13C、87Sr/86Sr多处于同期海水范围内,δ18O略偏负,Ce负异常,残余砂屑白云岩Eu呈负异常,而晶粒白云岩Eu多为正异常。微区δ13C、δ18O分析显示,残余砂屑白云岩的白云石雾心与亮边内δ13C均处于同期海水范围内,δ18O亮边较雾心偏负;晶粒白云岩中不同大小的晶粒白云石微区δ13C、δ18O显示相近特征,表明这两类白云岩均为海水浅埋藏成因,但受到后期热流体叠加改造。曲面他形粗晶鞍状白云石充填于裂隙与溶蚀孔洞内,镜下具波状消光特征,发亮红色光,δ13C与二叠纪海水相近,δ18O明显负偏,Eu呈正异常,指示鞍状白云石为热液成因。脉体白云石岩石学与地球化学特征表明其为晚期埋藏成因。川西地区栖霞组白云岩主体为浅埋藏成因,峨眉山玄武岩喷发期热液对其叠加改造,仅西南地区充填裂隙与溶洞的鞍形白云石为热液成因。     

川中磨溪—高石梯地区栖霞组白云岩特征及成因机制

川中磨溪—高石梯地区栖霞组发育滩相白云岩,目前对滩相中差异白云石化机理不明确,导致难以预测优质白云岩储层的分布。在岩石学和地层特征研究基础上,通过分析不同类型白云岩的微量元素及碳、氧、锶同位素特征,结合颗粒滩类型和构造背景,系统研究了该区不同类型白云岩的成因机理及模式。结果显示:研究区栖霞组白云岩中白云石以细晶为主,中晶和粗晶次之,晶形多为半自形—自形。白云岩具有明显的残余颗粒结构,表明原始岩性为颗粒灰岩。细晶、细—中晶白云岩的阴极发光整体较暗,呈暗红色至红色,稀土元素配分模式与同期灰岩相似,白云岩的87Sr/86Sr比值大部分落于二叠纪海水的87Sr/86Sr比值范围之内,表明白云岩的成岩流体与海水沉积的灰岩具有同源性。白云岩的δ13C值（3.73‰~4.19‰）与同期灰岩δ13C值（3.61‰~4.93‰）相近,表明白云岩与灰岩具有一致的碳源。从灰岩到白云岩,Sr含量明显减少且Mn含量有所增加,说明灰岩经过一定的成岩作用被交代形成白云岩,该类白云岩为埋藏条件下地层中富Mg2+的流体交代孔隙型颗粒灰岩而成;中—粗晶白云岩的阴极发光呈红色,具明显环带特征,且具有高的Mn含量、低Sr/Ba比值及铕的正异常,87Sr/86Sr比值高于同期海水值,δ18O值在-8.06‰~-8.52‰,为颗粒灰岩在埋藏期受持续、充足的云化流体供给而成,较高的包裹体均一温度和δ18O值明显偏负均指示埋藏白云化作用过程还受到局部高温的影响。总体而言,埋藏白云岩化是该区白云岩的主要成因,地层中富镁的流体在压力和热对流的双重影响下进行迁移,促进白云岩化流体的运移,但局部地区鞍形白云石的形成遭受了后期不同程度的热液改造作用。     

川东北地区下寒武统龙王庙组白云岩成因分析

通过剖面实测、薄片鉴定、阴极发光分析和地球化学分析,对川东北地区下寒武统龙王庙组白云岩成因进行了研究。研究结果表明:研究区龙王庙组自下而上发育灰岩—过渡岩性—白云岩,以颗粒结构为主,白云石主要为泥—粉晶,呈它形—半自形晶,阴极发光呈昏暗光—暗红光。样品的MgO与CaO呈负相关,白云岩Mg2+/Ca2+较低,高Na含量,低Sr、Fe、Mn含量,白云石有序度较低,各岩性稀土元素配分曲线平行一致分布,δCe无异常,δEu负异常,灰岩δ13C偏正、δ18O处于同期海水内,白云岩δ13C、δ18O偏正,87Sr/86Sr高于同期海水值。结合区域地质背景、岩石学特征和地球化学分析结果,研究区白云石化流体为高盐度蒸发海水,研究区白云岩为渗透回流白云石化作用形成。     

羌塘盆地中央隆起带南侧隆额尼-昂达尔错布曲组古油藏白云岩稀土元素特征及成因意义

以系统的岩石学及沉积相分析为基础,深入探讨了隆额尼—昂达尔错古油藏白云岩及其伴生灰岩的稀土元素地球化学特征,认为该区灰岩及白云岩∑REE仍受沉积相带及沉积过程的控制,且具∑REE较低的总体特征,白云岩中HREE比LREE更具贫化的特点,这些特征均系淡水淋漓作用的结果;灰岩及白云岩在配分模式上,均为相对平坦的页岩配分模式。其中灰岩在配分模式上,在∑REE较高的情况下表现出起伏较大的特点,而白云岩在∑REE较低的情况下,表现出较为平坦的特征,白云岩化过程中稀土元素有贫化和均一的趋势;灰岩与白云岩相比,灰岩δEu值较高,而白云岩δCe较高,反映出灰岩形成于水体较深的还原环境,而白云岩形成于古地理相对高点的氧化环境。该区白云岩为混合水交代成因。     

塔里木盆地玉北地区蓬莱坝组白云岩类型及成因

塔里木盆地玉北地区蓬莱坝组发育粉-细晶自形白云岩、中晶自形-半自形白云岩、粗晶自形-他形白云岩三种白云岩类型。粉-细晶白云岩具纹层状构造,稀土元素配分模式、总稀土含量与同期灰岩相似,氧同位素组成与同期海水成因的白云岩相近,表明白云岩化流体为同期海水,较高的盐度指数指示了相对浓缩的海水条件,较低的有序度值反应出快速的白云岩化过程,为准同生白云岩化的产物,白云石晶间均匀充填富Fe、富Si及高~(87)Sr/~(86)Sr比值的陆源物质,表明玉北地区在蓬莱坝组粉-细晶白云岩沉积期由于相对海平面较低从而受到陆源物质混入的影响。中晶白云岩和粗晶白云岩的稀土元素配分模式、总稀土含量、~(87)Sr/~(86)Sr比值等与同期海水特征相似,表明白云岩化流体为海水,可见残余颗粒结构,成岩温度较低,埋藏较浅,为埋藏的海水以及沿原始颗粒灰岩的粒间孔及可能存在的裂缝等通道向下运移的海水提供的Mg~(2+)导致的白云岩化,后期重结晶作用破坏了粗晶白云岩中的残余颗粒结构并导致其Fe、Mn含量及成岩温度、有序度值高于中晶白云岩,Sr含量及δ~(18)O值低于中晶白云岩。部分中-粗晶白云石边缘可见加大边,表明后期存在少量他源流体导致的次生加大作用。     

塔里木盆地下奥陶统白云岩化流体来源的地球化学分析

塔里木盆地是中国重要的含油气盆地,其中奥陶系白云岩是主要储层之一,然而有关白云岩成因的问题众说纷纭,其中的关键是对于白云岩化流体性质的认识不一。元素地球化学和同位素测试分析表明,白云岩的稀土元素来源大部分继承原始灰岩,具有与海水类似的配分特征,只不过稀土元素的含量明显增高了;Sr、Ti含量和Sr/Ba比值较高,且Sr和Mn都具典型的埋藏演化特征;碳、氧同位素分布于正常海相范围内,与典型的埋藏白云岩特征类似;在局部发育一些与断裂相关的铁(锰)白云岩和鞍状白云岩,显示明显的Eu正异常,具相对较高的Fe-Mn-Ba-Si(-Zn-Pb)元素含量及Sr/Ba比值。分析结果说明塔中和塔北下奥陶统的白云岩化流体主要为正常或浓缩了的海水,白云岩形成于准同生和/或埋藏环境,局部发育与断裂相关的热液白云岩,而前人强调的大气淡水或混合水作用对白云岩的形成并不重要。     

塔里木盆地寒武系—奥陶系白云岩稀土元素特征及其成因意义

塔里木盆地寒武系—奥陶系白云岩是重要的油气储集层,按能反映成因的结构构造特征将其分为4类,即泥晶—粉晶白云岩、藻纹层白云岩、斑状白云岩及重结晶白云岩。通过分析各类白云岩的稀土元素组成特征,并结合岩石学研究,探讨了各类白云岩成岩流体性质及其水岩比的相对大小。4类白云岩的ΣREE差别较大,但稀土元素配分模式均具LREE轻微富集、HREE亏损、Eu负异常且与海相泥晶灰岩相似的特征,其稀土元素配分模式主要受海水的影响。4类白云岩经受的成岩作用差别明显,但REE迁移行为类似,无明显分馏。泥晶—粉晶白云岩中ΣREE平均值为51.55×10-6,与泥晶灰岩相近,其ΣREE主要受控于原岩,受后期成岩作用的影响相对较小,其成岩过程的水岩比较小。藻纹层白云岩的ΣREE平均值为21.37×10-6,不及海相泥晶灰岩的1/2;岩石学及地球化学资料反映其成因与藻类密切相关,其低ΣREE可能是由ΣREE极低的藻类参与白云岩化所致,后期成岩改造作用对其影响并不明显。斑状白云岩的ΣREE平均值为28.89×10-6,远低于泥晶灰岩及泥晶—粉晶白云岩,反映其白云岩化过程的水岩比远高于泥晶—粉晶白云岩。重结晶白云岩的ΣREE平均值为13.64×10-6,不及泥晶灰岩的1/4,在4类白云岩中最低,岩石学特征表明此类白云岩经受了白云岩化及后期强烈重结晶2期主要成岩作用,而这2期成岩作用均需极高的水岩比,此类白云岩的稀土元素组成特征主要是这2期成岩作用叠加的结果,其低ΣREE值可能是大量ΣREE含量极低的成岩流体改造的结果。     

塔里木盆地寒武-奥陶系白云岩储层类型与分布特征

塔里木盆地寒武-奥陶系白云岩是台盆区最重要的储层之一,发育4种类型:①潮坪白云岩。以含膏泥晶白云岩为主,石膏溶孔及白云岩砾间孔发育,发育于潮间-潮上坪蒸发环境。白云石表现为MgO-CaO呈线性正相关、低Mg/Ca值及高∑REE值、锶同位素值分布在0.7085～0.7100之间,略高于同期海水值0.7090、阴极发光不发光或暗色光。储层分布主要受沉积相控制,发育于中下寒武统地层;②蒸发台地白云岩。以藻丘及颗粒灰岩选择性白云石化为特征,发育铸模孔、膏溶孔和残留粒间孔,白云石Mg/Ca值变化范围大、δ13C、δ18O值相对偏正、分别大于2‰和-4‰、阴极发光发较亮红光。储层主要发育于台内靠近台缘一侧;③埋藏白云岩。发育细晶、中晶及粗晶白云岩,以晶间孔及晶间溶孔为主,δ18O值偏负在-5‰～-10‰(PDB)之间,87Sr/86Sr值相对较大,为0.7090～0.7110,阴极发光以发暗棕褐色、紫色光为主。埋藏白云岩储层发育主要受成岩相控制,但也表现出与沉积相具有相关性,这是因为物性好的台缘、台内礁滩体及有裂缝沟通构成的开放体系更有利于埋藏白云石化作用发生;④热液白云岩。以受热液改造的结晶白云岩为特征,往往伴生热液矿物,白云石δ18O值异常偏负、一般小于-9‰(PDB)、阴极发光多发明亮红光、稀土元素标准化配分曲线中Eu出现正异常、出现高于地层背景值的异常高温包裹体;主要发育在具有上覆隔挡层的不整合面之下地层及大断裂发育带附近。上述四类白云岩在规模与分布上有不同,但都可预测。埋藏和热液白云岩规模较大,受原始沉积相带和成岩流体来源双重约束。潮坪和蒸发台地白云岩规模可变性较大,可由沉积环境重建,结合成岩相研究预测评价。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。