The Beni Haoua,Algeria, Mw 4.9 earthquake: source parameters,engineering, and seismotectonic implications

A moderate Mw 4.9 earthquake struck the Beni Haoua (Algeria) coastal area on April 25, 2012. The mainshock was largely recorded by the accelerograph network of the Centre National de Recherche Appliquée en Génie Parasismique (CGS). The same day the earthquake occurred, eight mobile short period stations were deployed through the epicentral area. In this study, we use accelerogram and seismogram data recorded by these two networks. We combined the focal mechanism built from the first motion of P waves and from waveform inversion, and the distribution of aftershocks to well constrain the source parameters. The mainshock is located with a shallow focal depth, ～9 km, and the focal mechanism shows a nearly pure left lateral strike slip motion, with total seismic moment of 2.8?×?10¹⁶ N.m (M_w?=?4.9). The aftershocks mainly cluster on a narrow NS strip, starting at the coast up to 3–4 km inland. This cluster, almost vertical, is concentrated between 6 and 10 km depth. The second part of this work concerns the damage distribution and estimated intensity in the epicentral area. The damage distribution is discussed in connection with the observed maximum strong motion. The acceleration response spectrum with 5 % damping of the mainshock and aftershocks give the maximum amplitude in high frequency which directly affects the performance of the high-frequency structures. Finally, we tie this earthquake with the seismotectonic of the region, leading to conclude that it occurred on a N–S transform zone between two major compressional fault zones oriented NE–SW.     

Source parameters of the 27th of June 2015 Gulf of Aqaba earthquake

On the 27 June 2015, at 15:34:03 UTC, a moderate-sized earthquake of M _w 5.0 occurred in the Gulf of Aqaba. Using teleseismic P waves, the focal mechanism of the mainshock was investigated by two techniques. The first technique used the polarities of the first P wave onsets, and the second technique was based on the normalized waveform modeling technique. The results showed that the extension stress has a NE orientation with a shallow southward plunge while the compression stress has a NW trend with a nearly shallow westward plunge, obtaining a strike-slip mechanism. This result agrees well with the typical consequence of crustal deformation resulting from the ongoing extensional to shear stress regime in the Gulf of Aqaba (NE-SW extension and NW-SE compression). The grid search method over a range of focal depths indicates an optimum solution at 15 ± 1 km. To identify the causative fault plane, the aftershock hypocenters were relocated using the local waveform data and the double-difference technique. Considering the fault trends, the spatial distribution of relocated aftershocks demarcated a NS-oriented causative fault, in consistence with one of the nodal planes of the focal mechanism solution, emphasizing the dominant stress regime in the region. Following the Brune model, the estimates of source parameters exhibited fault lengths of 0.29 ≤ L ≤ 2.48 km, moment magnitudes of 3.0 ≤ M _w ≤ 5.0, and stress drops of 0.14 ≤ Δσ < 1.14 MPa, indicating a source scaling similar to the tectonic earthquakes related to plate boundaries.     

The October 11, 1999 and November 08, 2006 Beni Suef Earthquakes

Two felt moderate-sized earthquakes with local magnitudes of 4.9 on October 11, 1999 and 4.3 on November 08, 2006 occurred southeast of Beni Suef and Cairo cities. Being well recorded by the digital Egyptian National Seismic Network (ENSN) and some regional broadband stations, they provided us with a unique opportunity to study the tectonic process and present-day stress field acting on the northern part of the Eastern Desert of Egypt. In this study, we analyze the main shocks of these earthquakes and present 15 well recorded aftershocks (0.9 ≤ ML ≤ 3.3) which have small errors on both horizontal and vertical axes. The relocation analysis using the double difference algorithm clearly reveals a NW trending fault for the 1999 earthquake. The spatial distribution of its aftershocks indicates a propagation of rupture from the SW towards the NW along a fault length ~5 km dipping nearly ~40°SW. We also determined the focal mechanisms of the two main shocks by two methods (polarities and amplitudes ratios of P, S_V and S_H and regional waveform inversion). Our results indicate a normal faulting mechanism with a slight shear component for the first event, while pure normal faulting for the second one. The spatial distribution of the 1999 aftershocks sequence along with the retrieved focal mechanism confirmed the NW plane as the true fault plane. While for the 2006 event, the few aftershocks do not reveal any fault geometry; its focal mechanism indicated a pure normal fault nearly trending WNW-ESE that corresponds more likely to the extension of the 1999 earthquake fault. The seismicity distribution between the two earthquake sequences reveals a noticeable gap that may be a site of a future event. The NNE-SSW extensional stress indicated by the mechanisms of these events is in agreement with the regional stress field and the rifting of the northern Red Sea in its northern branches (Gulf of Suez and Gulf of Aqaba). The source parameters (seismic moment, moment magnitude, fault radius, stress drop and displacement across the fault) were also estimated and compared based on both the regional waveform inversion and the displacement spectra and interpreted in the context of the tectonic setting. The obtained results imply a reactivation of the pre-exiting NW-SE faults as a result of extensional deformation from the northern Red Sea-Gulf of Suez rifts.     

2016年1月21日青海门源MS6.4余震序列重定位和主震震源机制解

2016年1月21日01时13分13.0秒（北京时间）,青海省海北州门源县发生M_S6.4地震.为了更好地认识这次地震的发震构造,本文利用青海省地震台网和甘肃省地震台网的省级固定地震台站及部分流动地震台站记录到的波形资料,通过重新拾取震相和联合HYPOINVERSE 2000与HypoDD定位方法,对2016年1月21日青海门源地震序列M_L≥1.8的189个地震事件进行了重新定位,并采用gCAP方法分别反演了主震的双力偶机制解和全矩张量解. 定位结果显示,主震位置为37.67°N、101.61°E,震源深度为11.98 km;余震序列展布方向为SE和NW两个方向、长度约16 km,震源深度优势分布为4~14 km,断层面倾向为SW方向. 利用gCAP方法得到的矩心深度在8~9 km之间. 结合野外地质调查结果,认为该次地震事件为一次逆冲型事件,其发震断层可能为北西向冷龙岭断裂与北西向民乐—大马营断裂之间的一条盲断层,推测由于印度板块与欧亚板块的碰撞挤压使得青藏高原北缘与阿拉善地块之间的东西向挤压而造成的断层应力失稳,从而形成门源地震.     

The 2014 Mihoub earthquake (Mw4.3), northern Algeria: empirical Green’s function analysis of the mainshock and the largest aftershock

On November 15, 2014, an Mw4.3 earthquake occurred 2 km west of Mihoub village, 60 km SE of Algiers. In this study, we retrieve the relative source-time functions of the mainshock and largest aftershock (Mw3.9) for rupture analysis using the empirical Green’s function method. The two events are nearly colocated with a smaller aftershock (Mw3.5), which is treated as the empirical Green’s function. Moreover, these three events have similar focal mechanisms, suggesting that deconvolution is well posed in this case. The three events were recorded by nine stations of the Algerian permanent network. We use mainly P-wave data. The focal mechanism solution shows dominant reverse faulting with a strong strike-slip component. The two nodal planes align almost E-W, dipping to the south, and NNE-SSW, dipping to the NW, respectively; the fault and auxiliary planes cannot be resolved from hypocenter locations alone because too few aftershocks were recorded by the permanent network. The results show unilateral rupture propagation to the ENE and complex rupture with multiple episodes for the mainshock. The largest aftershock shows similar behavior with slightly less pronounced directivity at some sites. The rupture directivity for the mainshock is estimated at about N66° E, and the rupture velocity is Vr = 0.66β. The E-W nodal plane of the best-fit focal mechanism is the preferred fault plane because it best agrees with the directivity direction and is consistent with the E-W faulting that dominates in the region.     

The Lemnos 8 January 2013 (M w = 5.7) earthquake: fault slip,aftershock properties and static stress transfer modeling in the north Aegean Sea

We investigate mainshock slip distribution and aftershock activity of the 8 January 2013 M _w?=?5.7 Lemnos earthquake, north Aegean Sea. We analyse the seismic waveforms to better understand the spatio-temporal characteristics of earthquake rupture within the seismogenic layer of the crust. Peak slip values range from 50 to 64 cm and mean slip values range from 10 to 12 cm. The slip patches of the event extend over an area of dimensions 16?×?16 km². We also relocate aftershock catalog locations to image seismic fault dimensions and test earthquake transfer models. The relocated events allowed us to identify the active faults in this area of the north Aegean Sea by locating two, NE–SW linear patterns of aftershocks. The aftershock distribution of the mainshock event clearly reveals a NE–SW striking fault about 40 km offshore Lemnos Island that extends from 2 km up to a depth of 14 km. After the mainshock most of the seismic activity migrated to the east and to the north of the hypocenter due to (a) rupture directivity towards the NE and (b) Coulomb stress transfer. A stress inversion analysis based on 14 focal mechanisms of aftershocks showed that the maximum horizontal stress is compressional at N84°E. The static stress transfer analysis for all post-1943 major events in the North Aegean shows no evidence for triggering of the 2013 event. We suggest that the 2013 event occurred due to tectonic loading of the North Aegean crust.     

2018年11月26日台湾海峡M_S6.2地震发震构造研究

本文利用福建省地震台网、广东省地震台网和台湾"中央"气象局17个台的宽频带记录,使用CAP方法反演了2018年11月26日台湾海峡M_S6.2地震震源机制解,得到节面1走向/倾角/滑动角为89°/82°/-173°,节面2走向/倾角/滑动角为358°/84°/-7°,最佳拟合深度14km,矩震级5.8.使用双差定位获取了94个M_L2.0以上地震的精定位结果,结果显示,主震位于北纬23.36°,东经118.62°,震源深度10.43km.根据小震分布和构造应力场反演得到余震断层面走向和倾角分别为88°和60°.研究认为,台湾海峡6.2级地震发震构造为近EW向的台湾浅滩断裂,受南海板块张裂拉伸发育而成,孕震过程中有东山隆起东缘断裂的参与,推测在菲律宾板块对欧亚板块NW-SE向挤压碰撞背景下,近EW向的台湾浅滩断裂与近NS向的东山隆起东缘断裂交接部位属于强度薄弱区,最终产生高倾角右旋走滑错动而引发地震,余震主要沿台湾浅滩断裂分布.     

Seismic relocation,focal mechanism and crustal seismic anisotropy associated with the 2010 Yushu MS7.1 earthquake and its aftershocks

The 2010 Yushu M_S7.1 earthquake occurred in Ganzi-Yushu fault, which is the south boundary of Bayan Har block. In this study, by using double difference algorithm, the locations of mainshock (33.13°N, 96.59°E, focal depth 10.22 km) and more than 600 aftershocks were obtained. The focal mechanisms of the mainshock and some aftershocks with M_S>3.5 were estimated by jointly using broadband velocity waveforms from Global Seismic Network (GSN) and Qinghai Seismic Network as well. The focal mechanisms and relocation show that the strike of the fault plane is about 125° (WNW-ESE), and the mainshock is left-laterally strikeslip. The parameters of shear-wave splitting were obtained at seismic stations of YUS and L6304 by systematic analysis method of shear-wave splitting (SAM) method. Based on the parameters of shear-wave splitting and focal mechanism, the characteristics of stress field in seismic source zone were analyzed. The directions of polarization at stations YUS and L6304 are different. It is concluded that after the mainshock and the M_S6.3 aftershock on April 14, the stress-field was changed.     

Focal depths and mechanisms of Tohoku-Oki aftershocks from teleseismic P wave modeling

Aftershocks of the 2011 Tohoku-Oki great earthquake have a wide range of focal depths and fault plane mechanisms. We constrain the focal depths and focal mechanisms of 69 aftershocks with M _w > 5.4 by modeling the waveforms of teleseismic P and its trailing near-surface reflections pP and sP. We find that the “thrust events” are within 10 km from the plate interface. The dip angles of these thrust events increase with depth from ~5° to ~25°. The “non-thrust events” vary from 60 km above to 40 km below the plate interface. Normal and strike-slip events within the overriding plate point to redistribution of stress following the primary great earthquake; however, due to the spatially variable stress change in the Tohoku-Oki earthquake, an understanding of how the mainshock affected the stresses that led to the aftershocks requires accurate knowledge of the aftershock location.     

Rupture process and aftershock focal mechanisms of the 2022 M6.8 Luding earthquake in Sichuan

According to the China Earthquake Networks Center, a strong earthquake of M6.8 occurred in Luding County, Ganzi Tibetan Autonomous Prefecture, Sichuan Province, China (102.08°E, 29.59°N), on September 5, 2022, with a focal depth of 16 km. Rapid determination of the source parameters of the earthquake sequence is vital for post-earthquake rescue, disaster assessment, and scientific research. Near-field seismic observations play a key role in the fast and reliable determination of earthquake source parameters. The numerous broadband seismic stations and strong-motion stations recently deployed by the National Earthquake Intensity Rapid Report and Early Warning project have provided valuable real-time near-field observation data. Using these near-field observations and conventional mid- and far-field seismic waveform records, we obtained the focal mechanism solutions of the mainshock and M ≥ 3.0 aftershocks through the waveform fitting method. We were further able to rapidly invert the rupture process of the mainshock. Based on the evaluation of the focal mechanism solution of the mainshock and the regional tectonic setting, we speculate that the Xianshuihe fault formed the seismogenic structure of the M6.8 strong earthquake. The aftershocks formed three spatially separated clusters with distinctly different focal mechanisms, reflecting the segmented nature of the Xianshuihe fault. As more high-frequency information has been applied in this study, the absolute location of the fault rupture is better constrained by the near-field strong-motion data. The rupture process of the mainshock correlates well with the spatial distribution of aftershocks, i.e., aftershock activities were relatively weak in the maximum slip area, and strong aftershock activities were distributed in the peripheral regions.     

The M<Subscript>W</Subscript> 4.5 Vallorcine (French Alps) earthquake of 8 September 2005 and its complex aftershock sequence

On 8 September 2005 a moderate M_W 4.5 earthquake occurred in the north-western Alps midway between Chamonix (France) and Martigny (Switzerland). The focal mechanism corresponds to a right-lateral strike-slip on a N60°E fault plane. The foreshock–mainshock–aftershock sequence is investigated on the basis of data recorded by a temporary network of 28 stations deployed for 1 month just after the mainshock, and data from permanent, regional seismic networks. Absolute and relative locations of more than 400 events are obtained with a mean uncertainty of approximately 0.2 km. Small foreshocks, the mainshock, and early and late aftershocks are located relative to the main aftershock set. The seismic sequence exhibits a surprisingly complex structure, with at least five clusters on distinct fault planes. The main elongated cluster agrees with the location of the mainshock, its hypocenter being 4.3 km below sea level. We discuss the relationship between the right-lateral fault beneath the Loriaz peak (the source of the Vallorcine event), the nearby normal Remuaz fault, and the regional seismotectonic stress field.     

2017年8月8日九寨沟M7.0地震及余震震源机制解与发震构造分析

2017年8月8日在青藏高原东缘四川省九寨沟县发生M7.0级强烈地震,极震区烈度达Ⅸ度,但无明显地表破裂,一定程度上限制了发震构造的确定和后续地震危险性判定.本文基于截止至2017年8月14日的地震资料,采用多阶段定位方法,对主震及余震进行了重新定位,同时,利用CAP波形反演方法,获得了M7.0主震与13次M_L ≥ 4.0级余震的震源机制解和震源矩心深度,进而初步分析了本次地震的发震构造.结果显示,九寨沟M7.0地震的矩震级M_W6.4,震源矩心深度5 km,表明主震发生在上地壳浅部,与2003年伊朗巴姆（Bam）M_W6.5地震特征极为相似;12次M_L ≥ 4.0级余震的震源矩心深度6~12 km,显示这些余震发生在主震下部,仅1次例外.重新定位后的余震震中呈NW-SE向窄带展布,位于近NS向的岷江断裂与近EW向的东昆仑断裂带东端分支塔藏断裂所夹持的区域,余震带长轴长约38 km,主震位于余震带中部.根据余震震中分布、主震及余震震源机制解等,推测本次九寨沟M7.0地震及其余震的主发震构造为位于岷江断裂与塔藏断裂之间的树正断裂.震源机制解揭示,树正断裂呈左旋走滑,走向约152°,近SE,倾向SW,倾角约70°,该断裂应属于东昆仑断裂东端的分支断裂之一,或与东南侧的虎牙断裂构成统一断裂系.     

The 2010 M w 7.2 El Mayor-Cucapah Earthquake Sequence, Baja California, Mexico and Southernmost California, USA: Active Seismotectonics along the Mexican Pacific Margin

The El Mayor-Cucapah earthquake sequence started with a few foreshocks in March 2010, and a second sequence of 15 foreshocks of M?>?2 (up to M4.4) that occurred during the 24?h preceding the mainshock. The foreshocks occurred along a north?Csouth trend near the mainshock epicenter. The M _w 7.2 mainshock on April 4 exhibited complex faulting, possibly starting with a ~M6 normal faulting event, followed ~15?s later by the main event, which included simultaneous normal and right-lateral strike-slip faulting. The aftershock zone extends for 120?km from the south end of the Elsinore fault zone north of the US?CMexico border almost to the northern tip of the Gulf of California. The waveform-relocated aftershocks form two abutting clusters, each about 50?km long, as well as a 10?km north?Csouth aftershock zone just north of the epicenter of the mainshock. Even though the Baja California data are included, the magnitude of completeness and the hypocentral errors increase gradually with distance south of the international border. The spatial distribution of large aftershocks is asymmetric with five M5+ aftershocks located to the south of the mainshock, and only one M5.7 aftershock, but numerous smaller aftershocks to the north. Further, the northwest aftershock cluster exhibits complex faulting on both northwest and northeast planes. Thus, the aftershocks also express a complex pattern of stress release along strike. The overall rate of decay of the aftershocks is similar to the rate of decay of a generic California aftershock sequence. In addition, some triggered seismicity was recorded along the Elsinore and San Jacinto faults to the north, but significant northward migration of aftershocks has not occurred. The synthesis of the El Mayor-Cucapah sequence reveals transtensional regional tectonics, including the westward growth of the Mexicali Valley and the transfer of Pacific?CNorth America plate motion from the Gulf of California in the south into the southernmost San Andreas fault system to the north. We propose that the location of the 2010 El Mayor-Cucapah, as well as the 1992 Landers and 1999 Hector Mine earthquakes, may have been controlled by the bends in the plate boundary.     

2013年芦山地震序列震源机制与震源区构造变形特征分析

基于四川区域地震台网记录的波形资料,利用CAP波形反演方法,同时获取了2013年4月20日芦山M7.0级地震序列中88个M≥3.0级地震的震源机制解、震源矩心深度与矩震级,进而利用应变花（strain rosette）和面应变（areal strain）As值,分析了芦山地震序列震源机制和震源区构造运动与变形特征.获得的主要结果有：（1）芦山M7.0级主震破裂面参数为走向219°/倾角43°/滑动角101°,矩震级为M_W6.55,震源矩心深度15 km.芦山地震余震区沿龙门山断裂带走向长约37 km、垂直断裂带走向宽约16 km.主震两侧余震呈不对称分布,主震南西侧余震区长约27 km、北东侧长约10 km.余震分布在7~22 km深度区间,优势分布深度为9~14 km,序列平均深度约13 km,多数余震分布在主震上部.粗略估计的芦山地震震源体体积为37 km×16 km×16 km.（2）面应变As值统计显示,芦山地震序列以逆冲型地震占绝对优势,所占比例超过93%.序列主要受倾向NW、倾角约45°的近NE-SW向逆冲断层控制;部分余震发生在与上述主发震断层近乎垂直的倾向SE的反冲断层上;龙门山断裂带前山断裂可能参与了部分余震活动.P轴近水平且优势方位单一,呈NW-SE向,与龙门山断裂带南段所处区域构造应力场方向一致,反映芦山地震震源区主要受区域构造应力场控制,芦山地震是近NE-SW向断层在近水平的NW-SE向主压应力挤压作用下发生逆冲运动的结果.序列中6次非逆冲型地震均发生在主震震中附近,且主震震中附近P轴仰角变化明显,表明主震对其震中附近局部区域存在明显的应力扰动.（3）序列整体及不同震级段的应变花均呈NW向挤压白瓣形态,显示芦山地震震源区深部构造呈逆冲运动、NW向纯挤压变形.各震级段的应变花方位与形状一致,具有震级自相似性特征,揭示震源区深部构造运动和变形模式与震级无关.（4）不同深度的应变花形态以NW-NWW向挤压白瓣为优势,显示震源区构造无论是总体还是分段均以NW-NWW向挤压变形为特征.但应变花方位与形状随深度仍具有较明显的变化,可能反映了震源区构造变形在深度方向上存在分段差异.（5）芦山地震震源体尺度较小,且主震未发生在龙门山断裂带南段主干断裂上,南段长期积累的应变能未能得到充分释放,南段仍存在发生强震的危险.     

The 20 April 2013 Lushan,Sichuan, mainshock,and its aftershock sequence: tectonic implications

Using the double-difference relocation algorithm, we relocated the 20 April 2013 Lushan, Sichuan, earthquake (M _S 7.0), and its 4,567 aftershocks recorded during the period between 20 April and May 3, 2013. Our results showed that most aftershocks are relocated between 10 and 20 km depths, but some large aftershocks were relocated around 30 km depth and small events extended upward near the surface. Vertical cross sections illustrate a shovel-shaped fault plane with a variable dip angle from the southwest to northeast along the fault. Furthermore, the dip angle of the fault plane is smaller around the mainshock than that in the surrounding areas along the fault. These results suggest that it may be easy to generate the strong earthquake in the place having a small dip angle of the fault, which is somewhat similar to the genesis of the 2008 Wenchuan earthquake. The Lushan mainshock is underlain by the seismically anomalous layers with low-V_P, low-V_S, and high-Poisson’s ratio anomalies, possibly suggesting that the fluid-filled fractured rock matrices might significantly reduce the effective normal stress on the fault plane to bring the brittle failure. The seismic gap between Lushan and Wenchuan aftershocks is suspected to be vulnerable to future seismic risks at greater depths, if any.     

近场全波形反演：芦山7.0级地震及余震矩张量解

2013年4月20日四川芦山发生了7.0级地震.该地震是自2008年汶川8.0级地震以来发生在龙门山断裂带上的最强地震,截至5月5日,四川省数字遥测台网记录到了52个（M_L≥4.0）余震.我们搜集了信噪比相对较高的宽频带数据,根据已有的三个分别适合于四川盆地和龙门山断裂东南地区、西南山区、西北山区速度模型,利用TDMT_INVC方法计算矩张量,获得了芦山主震及其16个余震的高质量矩张量解;根据P轴、B轴和T轴的倾角对主震及余震的断层类型进行了分类,结果表明：芦山地震的震级为M_w6.46（矩震级）,地震矩为0.61×10¹⁹Nm,震源深度为13 km,震源机制类型为逆断层.芦山余震类型简单,主要为逆冲型;芦山地震序列震中分布于龙门山断裂带西南端的彭县—灌县断裂上,本研究获得的主震和余震的震源机制主要为逆冲型,这表明了龙门山断裂西南端主要为逆冲特征.芦山地震震源性质与汶川地震相近,发震间隔时间短,且均发生于同一构造单元内,表明了该地震与汶川地震可能有密切关系.     

唐山、海城、盐源-宁蒗地震强余震特征

对大地震发生后强余震的震源机制,基于主要地震断层上小余震的时空分布进行了详细研究.近期在中国境内发生的强烈板内地震,如1976年唐山、1975年海城、1976年盐源——宁蒗等地震曾被中国地震台网很好记录.主震刚发生后的小余震以及强余震前后的小余震的震源用 S——P 时间的收敛法进行测定.强余震的断层是依靠这些小余震的震中分布来描绘的.可以看出有三种情况.第一,在主震断层区内,一次强余震发生在较小余震的比较不密集的部位;第二,一次强余震沿断层发生并与主震断层是共轭的;第三,一次强余震在沿平行并离开主震断层的断层上发生.可以认为,地质条件控制着强余震的发生.作为强余震的可能前兆,则有唐山地震的一次强余震,震级为7.1.其发生前,出现一些前震以及在接近主震断层方向上的某些地震台所记录的初动方向有变化.可以设想,这里的应力场在强余震发生前是有所变化的.      

Segmented seismicity of the M w 6.2 Baladeh earthquake sequence (Alborz Mountains, Iran) revealed from regional moment tensors

The M _w 6.2 Baladeh earthquake occurred on 28 May 2004 in the Alborz Mountains, northern Iran. This earthquake was the first strong shock in this intracontinental orogen for which digital regional broadband data are available. The Baladeh event provides a rare opportunity to study fault geometry and ongoing deformation processes using modern seismological methods. A joint inversion for hypocentres and a velocity model plus a surface-wave group dispersion curve analysis were used to obtain an adapted velocity model, customised for mid- and long-period waveform modelling. Based on the new velocity model, regional waveform data of the mainshock and larger aftershocks (M _w ?≥3.3) were inverted for moment tensors. For the Baladeh mainshock, this included inversion for kinematic parameters. All analysed earthquakes show dominant thrust mechanisms at depths between 14 and 26 km, with NW–SE striking fault planes. The mainshock ruptured a 28° south-dipping area of 24 × 21 km along a north-easterly direction. The rupture plane of the mainshock does not coincide with the aftershock distribution, neither in map view nor with respect to depth. The considered aftershocks form two main clusters. The eastern cluster is associated with the mainshock. The western cluster does not appear to be connected with the rupture plane of the mainshock but, instead, indicates a second activated fault plane dipping at 85° towards the north.     

2017年四川九寨沟MS7.0地震及余震精定位研究

2017年8月8日21点19分四川省九寨沟县发生M_S7.0级强震,本文应用对相对位置和绝对位置都有较好约束的hypoRelocate精定位方法,对8月15日前M_L大于1.5的854个余震重新定位.重定位使用了6178个Pg走时、3363个Sg走时、158929个地震对的相对走时差以及74个M_L大于3.5的34个地震构造的SH尾波互相关走时.定位结果显示,余震区呈NW向分布,长度约35 km、宽度约12 km.以主震为中心,余震形成西北和东南两个丛集区,其中西北区的余震展布较东南区宽,发震断层近似垂直,与主震的震源机制解吻合.余震深度主要集中在5~15 km,主震深度为16 km.从沿断层走向的垂直剖面可见,主震周围一直延伸到地表的区域,余震相对稀少,出现明显空区,这种现象可能与主震发生时该区域的滑动位移较大,应力得到充分释放有关.另外,我们还发现震后60 h之后余震的深度明显变浅,且西北向的深度明显浅于东南向.通过对比分析流动台站布设前后余震深度的分布特点,我们认为这种时空演化差异主要是由流动台站陆续布设和使用造成的,对余震的主要分布特征影响不大.     

龙门山断裂带地壳精细结构与汶川地震发震机理

利用2001年1月至2008年6月四川固定地震台网和临时地震台站记录到的大量P波到时资料,反演了龙门山断裂带及周边地区的地壳精细三维P波速度模型. 结果表明,汶川主震以北和以南地区的结构存在较大差异,以北地区的龙门山断裂带具有很强地壳不均匀性,这与该区发生了大量汶川地震的余震相一致. 这些结果有意义地改进了前人对龙门山断裂带仅为不同块体过渡带的认识. 汶川主震震源区下方存在有明显低波速异常体,表明流体可能存在于龙门山断裂带内. 这些流体可能直接影响汶川大震的形成. 本文的成像结果为下地壳流沿龙门山断裂带上浸提供了可靠的地震学证据.