Magma eruption rates of Merapi volcano,Central Java,Indonesia during one century (1890–1992)

The magma eruption rates of Merapi volcano form 1890 to 1992 are re-examined chronologically. For this volcano, movements of extruded lavas and domes as well as their extrusions are important because they control the modes of the subsequent activities and cause nuées ardentes and lahars. The monthly eruption rates varied widely, but the cumulative volume of lavas has increased linearly and is expressed as 0.1x10⁶ m³/month. The magma production rate of this volcano may have been constant for these 100 years. Recurrent excessive effusion of lavas is tentatively interpreted by assuming a magma reservoir. The averaged eruption rate is small in comparison with other volcanoes such as Nyramuragia, Kilauea and Vesuvio. However, it is remarkable that the activity has been continuous for these 100 years and the total amount of lava discharged during this period reached more than 10⁸ m³. A simple model for the formation of the 1992 lava dome is presented. The viscosity of the lavas is probably between 10⁶ and 10⁷ P and the length of the magma conduit is probably less than 10 km.     

Nuées ardentes of 22 November 1994 at Merapi volcano, Java, Indonesia

Nuées ardentes associated with dome collapse on 22 November 1994, at Merapi volcano traveled to the south–southwest as far as 6.5 km, and collectively accumulated roughly 2.5–3 million cubic meters of deposits. The damaged area comprises 9.5 km² and is covered by two nuée ardente facies, a conventional “Merapi-type”, valley-fill block-and-ash flow facies and a pyroclastic surge facies. The proximal deposits reflect the accumulation of dozens of nuées ardentes, with many subsidiary flow units. The distal deposits are more simply organized, as only a few individual events reached to distances >3.5 km. The stratigraphic relationships north of Turgo hill indicate that the surge deposits are a facies of particularly mobile nuées ardentes that also deposited channeled block-and-ash flow facies. They further suggest that the surge facies beyond the channel margins correlate laterally with a finer-grained sublayer locally developed at the base of the block-and-ash flow facies. Eyewitness reports suggest that the emplacement of the block-and-ash flow facies in the distal part of the Boyong river may have followed, by a short time interval, the destruction and deposition of the surge facies at Turgo village. The stratigraphy is in accord with the eyewitness reports. The surge facies was emplaced by a dilute surge current, detached from the same dome-collapse nuée ardente that, as a separate flow unit, subsequently emplaced the distal block-and-ash deposit in the Boyong valley. The detachment occurred at higher elevations, likely at or above the slope break at about 2000 m elevation. This flow separation enabled the surge current to shortcut over the landscape and to emplace its deposit even as the block-and-ash flow continued its tortuous southward movement in the Boyong channel. Dome-collapse nuée ardente activity formed the bulk of the eruption, which was accompanied by virtually no significant vertical summit explosive activity.     

Lahars at Merapi volcano, Central Java: an overview

Merapi volcano, in Central Java, is one of the most active volcanoes in the world. At least 23 of the 61 reported eruptions since the mid-1500s have produced source deposits for lahars. The combined lahar deposits cover about 286 km² on the flanks and the surrounding piedmonts of the volcano. At Merapi, lahars are commonly rain-triggered by rainfalls having an average intensity of about 40 mm in 2 h. Most occur during the rainy season from November to April, and have average velocities of 5–7 m/s at 1000 m in elevation. A wide range of facies may be generated from a single flow, which may transform downvalley from debris flow to hyperconcentrated streamflow.Because of the high frequency and magnitude of the lahar events, lahar-related hazards are high below about 450–600 m elevation in each of the 13 rivers which drain the volcano. Hazard-zone maps for lahar were produced by Pardyanto et al. (Volcanic hazard map, Merapi volcano, Central Java (1/100,000). Geol. Surv. of Indonesia, Bandung, II, 4, 1978) and the Japanese–Indonesian Cooperation Agency (Master plan for land conservation and volcanic debris control in the area of Mt Merapi, Jakarta, 1980), but these maps are of a very small scale to meet modern zoning requirements. More recently, a few large-scale maps (1/10,000- and 1/2000-scale) and risk assessments have been completed for a few critical river systems.     

Rate of sediment yield following small‐scale volcanic eruptions: a quantitative assessment at the Merapi and Semeru stratovolcanoes,Java, Indonesia

Sediment yields were calculated on the ?anks of Merapi and Semeru volcanoes in Java, Indonesia, using two different methods. During the ?rst year following the 22 November 1994 eruption of Merapi, a sediment yield in excess of 1·5 × 10⁵ m³ km^?2 yr^?1 was calculated in the Boyong River drainage basin, based on the volumes of sediment that were trapped by ?ve check dams. At Semeru, sediment discharges were assessed in the Curah Lengkong River from direct measurements on the lahars in motion and on the most signi?cant stream?ows. The calculated rate of sediment yield during one year of data in 2000 was 2·7 × 10⁵ m³ km^?2 yr^?1. Sediment yields are dominated by rain‐triggered lahars, which occur every rainy season in several drainage basins of Merapi and Semeru volcanoes, mostly during the rainy season extending from October to April. The return period of lahars carrying sediment in excess of 5 × 10⁵ m³ is about one year in the Curah Lengkong River at Semeru. At Merapi, the volume of sediments transported by a lahar did not exceed 2·8 × 10⁵ m³ in the Boyong River during the rainy season 1994–95. On both volcanoes, the sediments are derived from similar sources: pyroclastic‐?ow/surges deposits, rockfalls from the lava domes, and old material from the riverbed and banks. However, daily explosions of vulcanian type at Semeru provide a more continuous sediment supply than at Merapi. Therefore, sediment yields are larger at Semeru. Copyright © 2004 John Wiley & Sons, Ltd.     

Broadband seismic experiment at Merapi Volcano, Java, Indonesia: very-long-period pulses embedded in multiphase earthquakes

Multiphase (MP) and low frequency (LF) earthquakes with spectral peak amplitudes at 3–4 and 1 Hz, respectively, are two common types of shallow volcanic earthquakes previously recognized at Merapi Volcano. Their mechanisms are poorly understood but MPs have been temporally associated with lava dome growth. We conducted a seismic experiment in January–February 1998, using four broadband seismographs to investigate the nature of seismic activity associated with dome growth. During our experiment, Merapi experienced mild dome growth with low-level seismic activity. We compare our data to that recorded on a local short-period (SP) network, with the following preliminary results.MP and LF events as recorded and classified on the short-period network instruments were recognized on the broadband network. Frequency spectrograms revealed similar patterns in the near summit region at widely separated broadband stations. Higher frequency spectra than previously recognized were identified for both MP and LF events, and were strongly attenuated as a function of radial distance from the source. Thus the spectral characteristics of these events as recorded on far-field stations are not fully indicative of the source processes. In particular, many events classified as LF-type appear to have much high frequency energy near the source. This aspect of these so-called LF earthquakes, and their association with very-long-period (VLP) pulses, suggests that many events identified in the far-field as LF events are in actuality a variety of the MP event and involve similar source processes. Broadband records indicated that simple large-amplitude VLP pulses were embedded in MP and LF wavetrains. From event to event these pulses were similar in their waveforms and had periods of 4 s. VLP events embedded in LF and MP earthquakes were located using particle motions. The epicenters were clustered in a central region of the dome complex, and preliminary source depths were within about 100 m of the dome surface, suggesting a source region deep within the dome or the uppermost conduit. A similar source location was established by study of MP high-frequency onsets. Our broadband data suggests that we have recorded both elastic seismic waves and a simple embedded pulse that is interpreted to represent a surface tilt at the seismometer site. The inferred tilt indicates an inflation and subsequent deflation, possibly caused by a gas pressure pulse or episodic shallow magma transport with stick-slip movement of the conduit wall.     

Deformation and seismic precursors to dome-collapse and fountain-collapse nuées ardentes at Merapi Volcano, Java, Indonesia, 1994–1998

Following the eruption of January 1992, episodes of lava dome growth accompanied by generation of dome-collapse nuées ardentes occurred in 1994–1998. In addition, nuées ardentes were generated by fountain-collapse in January 1997, and the 1998 events also suggest an explosive component. Significant tilt and seismic precursors on varying time scales preceded these events. Deformation about the summit has been detected by electronic tiltmeters since November 1992, with inflation corresponding generally to lava dome growth, and deflation (or decreased inflation) corresponding to loss of dome mass. Strong short-term (days to weeks) accelerations in tilt rate and seismicity occurred prior to the major nuées ardentes episodes, apart from those of 22 November 1994 which were preceded by steadily increasing tilt for over 200 days but lacked short-term precursors. Because of the combination of populated hazardous areas and the lack of an issued warning, about 100 casualties occurred in 1994. In contrast, the strong precursors in 1997 and 1998 provided advance warning to observatory scientists, enabled the stepped raising of alert levels, and aided hazard management. As a result of these factors, but also the fortunate fact that the large nuées ardentes did not quite descend into populated areas, no casualties occurred. The nuée ardente episode of 1994 is interpreted as purely due to gravitational collapse, whereas those of 1997 and 1998 were influenced by gas-pressurization of the lava dome.     

Magnetic monitoring at Merapi volcano, Indonesia

Merapi volcano, located 30 km north of the heavily populated city of Yogjakarta, Java, is one of the most active of the 129 volcanoes in Indonesia. About every 2 years a new phase of activity is observed. Depending on the past activity the unrest gives rise either to an endogenous dome which partly collapses in the southwest direction or to pyroclastic flows which travel as far as 15 km. The 1990–1997 period has involved a plume emission on 30 August 1990, an extrusion on 20 January 1992, and a pyroclastic eruption on 22 November 1994. The intensity of the Earth magnetic field has been measured simultaneously and digitally recorded at four stations since 1990. Two Overhauser magnetometers with resolution of 0.01 nT have been installed in the summit area to strengthen the volcano monitoring. Outstanding magnetic changes appear to correlate with volcanic activity. Three types of volcanomagnetic signals can be identified: long-term trends up to 15 nT with period >10 years; medium-term cyclic variations, at most 3 nT in amplitude and with 1–2 years period; and small events, reaching 1.5 nT, lasting a few months, and associated with any remarkable volcanic activity. Merapi volcano began a new cycle of activity in 1995 leading to a dome growth in July 1996, and accompanied by 27 nuées ardentes in August. The comparison between magnetic data, seismicity, and surface phenomena suggests that some long-term trends of decade periods could be of thermomagnetic origin, while mid-term volcanomagnetic variations associated with the cycles of Merapi activity could be of piezomagnetic origin. Short-term variations of a few weeks duration, less than 1.5 nT, are well correlated with the 1995–1996 seismic activity.     

Longitudinal structure of pyroclastic-flow deposits,revealed by GPR survey,at Merapi Volcano,Java, Indonesia

In 2006 Merapi volcano, Indonesia, erupted for a few months, producing several block-and-ash flows reaching a maximum distance of 7.5 km from the main vent. During the eruption, we conducted a survey on those flow deposits in the Gendol Valley at Kaliadem village, about 4.5 km from the Merapi submit, using a Ground Penetrating Radar (GPR). The upper deposit was studied in its distal reaches, whereas the one below was studied in its medial reaches. The field study was carried out with a commercial RAMAC® GPR coupled with 100 MHz antennas, and the data treatment conducted with Reflex™ software. From this survey, we determined both deposits' local (1) thickness – reaching a maximum of 15 m – and (2) internal architecture. This last one is governed by long reflecting horizons extending over 20 to 30 m that delimit layers showing progradation patterns in their distal reaches. Within these layers we could also observe an internal architecture of still unknown origin. The layers are interpreted as the result of the flow pulses that progressively deposited downstream-ward by progradation. However the interpretation of those GPR profiles is a bit hazardous, because of the absence of outcrops, and we can only proceed by analogy with other studies. Nevertheless, despite numerous limitations, GPR is a helpful tool to understand pyroclastic deposits' structure when no visual observations are available.     

Field observations and surface characteristics of pristine block-and-ash flow deposits from the 2006 eruption of Merapi Volcano,Java, Indonesia

A series of pristine block-and-ash flow deposits from the May–June 2006 eruption of Merapi represent an exceptional record of small-volume pyroclastic flows generated by gravitational lava-dome collapses over a period of about two months. The deposits form nine overlapping lobes reaching ~ 7 km from the summit in the Gendol River valley on the volcano's southern flank, which were produced by successive flows generated during and after the major dome-collapse event on June 14. Both, single pulse (post-June 14 events) and multiple-pulse pyroclastic flows generated by sustained dome collapses on June 14 are recognised and three types of deposits, spread over an area of 4.7 km², are distinguished, totalling 13.3 × 10⁶ m³: (1) valley-confined basal avalanche deposits (11.7 × 10⁶ m³) in the Gendol River valley, (2) overbank pyroclastic-flow and associated surge deposits (1.4 × 10⁶ m³), where parts of the basal avalanche spread laterally onto interfluves and were subsequently channeled into the surrounding river valleys and (3) dilute ash-cloud surge deposits (0.2 × 10⁶ m³) along valley margins. Variations in the distribution, surface morphology and lithology of the deposits are related to the source materials involved in individual pyroclastic-flow-forming events and varying modes of transport and deposition of the different flows. Inferred flow velocities of the largest block-and-ash flows generated on June 14 vary from 43.8–13.5 m/s for the basal avalanche and from 62.6–24.2 m/s for the ash-cloud surge. The minimum temperatures range from 400 °C for the basal avalanche to 165 °C for the overlying ash cloud. Due to the potential of being re-channeled into adjacent river valleys and flowing laterally away from the main river channel, the overbank pyroclastic flows are considered the most hazardous part of the block-and-ash flow system. The conditions that lead to their development during flow transport and deposition must be taken into account when assessing future pyroclastic flow hazards at Merapi and similar volcanoes elsewhere.     

Geology and eruptive history of Unzen volcano, Shimabara Peninsula, Kyushu, SW Japan

During the past 500 thousand years, Unzen volcano, an active composite volcano in the Southwest Japan Arc, has erupted lavas and pyroclastic materials of andesite to dacite composition and has developed a volcanotectonic graben. The volcano can be divided into the Older and the Younger Unzen volcanoes. The exposed rocks of the Older Unzen volcano are composed of thick lava flows and pyroclastic deposits dated around 200–300 ka. Drill cores recovered from the basal part of the Older Unzen volcano are dated at 400–500 ka. The volcanic rocks of the Older Unzen exceed 120 km³ in volume. The Younger Unzen volcano is composed of lava domes and pyroclastic deposits, mostly younger than 100 ka. This younger volcanic edifice comprises Nodake, Myokendake, Fugendake, and Mayuyama volcanoes. Nodake, Myokendake and Fugendake volcanoes are 100–70 ka, 30–20 ka, and <20 ka, respectively. Mayuyama volcano formed huge lava domes on the eastern flank of the Unzen composite volcano about 4000 years ago. Total eruptive volume of the Younger Unzen volcano is about 8 km³, and the eruptive production rate is one order of magnitude smaller than that of the Older Unzen volcano.     

Pyroclastic flows from the 1991 eruption of Unzen volcano,Japan

Pyroclastic flows from Unzen were generated by gravitational collapse of the growing lava dome. As soon as the parental lobe failed at the edge of the dome, spontaneous shattering of lava occurred and induced a gravity flow of blocks and finer debris. The flows had a overhanging, tongue-like head and cone- or rollershaped vortices expanding outward and upward. Most of the flows traveled from 1 to 3 km, but some flows reached more than 4 km, burning houses and killing people in the evacuated zone of Kita-kamikoba on the eastern foot of the volcano. The velocities of the flows ranged from 15 to 25 m/s on the gentle middle flank. Observations of the flows and their deposits suggest that they consisted of a dense basal avalanche and an overlying turbulent ash cloud. The basal avalanche swept down a topographic low and formed to tongue-like lobe having well-defined levees; it is presumed to have moved as a non-Newtonian fluid. The measured velocities and runout distances of the flows can be matched to a Bingham model for the basal avalanche by the addition of turbulent resistance. The rheologic model parameters for the 29 May flow are as follows: the density is 1300 kg/m³, the yield strength is 850 Pa, the viscosity is 90 Pa s, and the thickness of the avalanche is 2 m. The ash cloud is interpreted as a turbulent mixing layer above the basal avalanche. The buoyant portions of the cloud produced ash-fall deposits, whereas the dense portions moved as a surge separated from the parental avalanche. The ash-cloud surges formed a wide devastated zone covered by very thin debris. The initial velocities of the 3 June surges, when they detached from avalanches, are determined by the runout distance and the angle of the energy-line slope. A comparison between the estimated velocities of the 3 June avalanches and the surges indicates that the surges that extended steep slopes along the avalanche path, detached directly from the turbulent heads of the avalanches. The over-running surge that reached Kita-Kamikoba had an estimated velocity higher than that of the avalanche; this farther-travelled surge is presumed to have been generated by collapse of a rising ash-cloud plume.     

Reconstruction of the eruptive history of Usu volcano,Hokkaido, Japan,inferred from petrological correlation between tephras and dome lavas

Usu volcano has erupted nine times since 1663. Most eruptive events started with an explosive eruption, which was followed by the formation of lava domes. However, the ages of several summit lava domes and craters remain uncertain. The petrological features of tephra deposits erupted from 1663 to 1853 are known to change systematically. In this study, we correlated lavas with tephras under the assumption that lava and tephra samples from the same event would have similar petrological features. Although the initial explosive eruption in 1663 was not accompanied by lava effusion, lava dome or cryptodome formation was associated with subsequent explosive eruptions. We inferred the location of the vent associated with each event from the location of the associated lava dome and the pyroclastic flow deposit distribution and found that the position of the active vent within the summit caldera differed for each eruption from the late 17th through the 19th century. Moreover, we identified a previously unrecognized lava dome produced by a late 17th century eruption; this dome was largely destroyed by an explosive eruption in 1822 and was replaced by a new lava dome during a later stage of the 1822 event at nearly the same place as the destroyed dome. This new interpretation of the sequence of events is consistent with historical sketches and documents. Our results show that petrological correlation, together with geological evidence, is useful not only for reconstructing volcanic eruption sequences but also for gaining insight into future potential disasters.     

Temporal variations in magma composition at Merapi Volcano (Central Java, Indonesia): magmatic cycles during the past 2000 years of explosive activity

Merapi Volcano (Central Java, Indonesia) has been frequently active during Middle to Late Holocene time producing basalts and basaltic andesites of medium-K composition in earlier stages of activity and high-K magmas from 1900 ¹⁴C yr BP to the present. Radiocarbon dating of pyroclastic deposits indicates an almost continuous activity with periods of high eruption rates alternating with shorter time spans of distinctly reduced eruptive frequency since the first appearance of high-K volcanic rocks. Geochemical data of 28 well-dated, prehistoric pyroclastic flows of the Merapi high-K series indicate systematic cyclic variations. These medium-term compositional variations result from a complex interplay of several magmatic processes, which ultimately control the periodicity and frequency of eruptions at Merapi. Low eruption rates and the absence of new influxes of primitive magma from depth allow the generation of basaltic andesite magma (56–57 wt% SiO₂) in a small-volume magma reservoir through fractional crystallisation from parental mafic magma (52–53 wt% SiO₂) in periods of low eruptive frequency. Magmas of intermediate composition erupted during these stages provide evidence for periodic withdrawal of magma from a steadily fractionating magma chamber. Subsequent periods are characterised by high eruption rates that coincide with shifts of whole-rock compositions from basaltic andesite to basalt. This compositional variation is interpreted to originate from influxes of primitive magma into a continuously active magma chamber, triggering the eruption of evolved magma after periods of low eruptive frequency. Batches of primitive magma eventually mix with residual magma in the magmatic reservoir to decrease whole-rock SiO₂ contents. Supply of primitive magma at Merapi appears to be sufficiently frequent that andesites or more differentiated rock types were not generated during the past 2000 years of activity. Cyclic variations also occurred during the recent eruptive period since AD 1883. The most recent eruptive episode of Merapi is characterised by essentially uniform magma compositions that may imply the existence of a continuously active magma reservoir, maintained in a quasi-steady state by magma recharge. The whole-rock compositions at the upper limit of the total SiO₂ range of the Merapi suite could also indicate the beginning of another period of high eruption rates and shifts towards more mafic compositions.     

Origin, characteristics, and behaviour of lahars following the 1990 eruption of Kelud volcano, eastern Java (Indonesia)

 In contrast to most twentieth-century eruptions of Kelud volcano (eastern Java), the 10 February 1990 plinian eruption was not accompanied by lake-outburst lahars. However, at least 33 post-eruption lahars occurred between 15 February and 28 March 1990. They swept down 11 drainage systems and travelled as far as 24 km at an estimated mean peak velocity in the range of 4–11 m s^–1. The deposits (volume ≥30 000 000 m³) were approximately 7 m thick 2 km from vent, and 3 m thick 10 km from vent, on the volcaniclastic apron surrounding the volcano. Subtle but significant sedimentological differences in the deposits relate to four flow types: (a) Early, massive deposits are coarse, poorly sorted, slightly cohesive, and commonly inversely graded. They are inferred to record hot lahars that incorporated pumice and scoria from pyroclastic-flow deposits, probably by rapid remobilization of hot proximal pyroclastic flow deposits by rainfall runoff. Sedimentary features, such as clasts subparallel to bedding and thick, reversely to ungraded beds, suggest that these flows were laminar. (b) Abundant, very poorly sorted deposits include non-cohesive, clast-supported, inversely graded beds and ungraded, finer-grained, and cohesive matrix-supported beds. These beds display layering and vertical segregation/density stratification, suggesting unsteady properties of pulsing debris flows. They are interpreted as deposited from segments of flow waves at a middle distance downstream that incorporated pre-eruption sediments. Sedimentological evidence suggests unsteady flow properties during progressive aggradation. (c) Fine-grained, poorly sorted and ungraded deposits are interpreted as recording late hyperconcentrated streamflows that formed in the waning stage of an overflow and transformed downcurrent into streamflows. (d) Ungraded, crudely stratified deposits were emplaced by flows transitional between hyperconcentrated flows and streamflows that traveled farther downvalley (as far as 27 km from the vent). At Kelud, the transformation of flow and behavior occurs within only 10 km of the source, at the apex of the alluvial fans. The rapid change of flow behavior is attributed to the low fines content and to the unsteady flow regime, which may be due to: (a) the rapid deposition of bedload, owing to the break in channel gradient close to the vent and to changes in channel cross-section and roughness; and (b) the very low silt+clay content in the non-cohesive deposits. These deposits mix with water to produce streamflows. Received: 27 June 1997 / Accepted: 5 January 1998     

Seismicity at White Island volcano, New Zealand: a revised classification and inferences about source mechanism

The classification of earthquakes at White Island volcano, New Zealand, has been revised to address problems in existing classification schemes, to better reflect new data and to try to focus more on source processes. Seismicity generated by the direct involvement of magmatic or hydrothermal fluids are referred to as volcanic, and that generated by fault movement in response to stresses caused by those fluids, regional stresses, thermal effects and so on are referred to as volcano-tectonic. Spasmodic bursts form a separate category, as we have insufficient information to classify them as volcanic or volcano-tectonic. Volcanic seismicity is divided into short-duration, long-period volcanic earthquakes, long-duration volcanic earthquakes, and harmonic- and non-harmonic volcanic tremor, while volcano-tectonic seismicity is divided into shallow and deep volcano-tectonic earthquakes. Harmonic volcanic tremor is related to sub-surface intrusive processes, while non-harmonic volcanic tremor originates close to active craters at shallow depth, and usually occurs during eruptive activity. Short-duration, long-period volcanic earthquakes come from a single source close to the active craters, but originate deeper than non-harmonic volcanic tremor, and are not related to eruptive activity. Long-duration volcanic earthquakes often accompany larger discrete eruptions. The waveform of these events consists of an initial low-frequency part from a deep source, and a later cigar-shaped part of mixed frequencies from a shallow crater source.     

Seismic signature of a phreatic explosion: hydrofracturing damage at Karthala volcano, Grande Comore Island, Indian Ocean

Karthala volcano is a basaltic shield volcano with an active hydrothermal system that forms the southern two-thirds of the Grande Comore Island, off the east coat of Africa, northwest of Madagascar. Since the start of volcano monitoring by the local volcano observatory in 1988, the July 11th, 1991 phreatic eruption was the first volcanic event seismically recorded on this volcano, and a rare example of a monitored basaltic shield. From 1991 to 1995 the VT locations, 0.5<M_l<4.3, show a crack shaped pattern (3 km long, 1 km wide) within the summit caldera extending at depth from –2 km to +2 km relative to sea level. This N-S elongated pattern coincides with the direction of the regional maximum horizontal stress as deduced from regional focal mechanism solutions. This brittle signature of the damage associated with the 1991 phreatic eruption is a typical pattern of the seismicity induced by controlled fluid injections such as those applied at geothermal fields, in oil and gas recovery, or for stress measurements. It suggests the 1991 phreatic eruption was driven by hydraulic fracturing induced by forced fluid flow. We propose that the extremely high LP and VT seismicity rates, relative to other effusive volcanoes, during the climax of the 1991 phreatic explosion, are due to the activation of the whole hydrothermal system, as roughly sized by the distribution of VT hypocenters. The seismicity rate in 1995 was still higher than the pre-eruption seismicity rate, and disagrees with the time pattern of thermo-elastic stress readjustment induced by single magma intrusions at basaltic volcanoes. We propose that it corresponds to the still ongoing relaxation of pressure heterogeneity within the hydrothermal system as suggested by the few LP events that still occurred in 1995.Editorial responsibility: H Shinohara     

The last 5000 years of activity at Sete Cidades volcano (São Miguel Island,Azores): Implications for hazard assessment

Sete Cidades is a central volcano with a summit caldera at the western end of São Miguel Island, Azores. Its stratigraphy comprises two main geological groups: the Inferior Group, the units of which date from more than 200 000 years ago through to 36 000 years before present, consisting of thick lava flows and subaerial volcaniclastic deposits that built the base of the central volcano; and the Superior Group which comprises all the activity from the last 36 000 years, including pumice and scoria fallout and PDC deposits with minor lava flows. The volcanostratigraphy is divided into six main formations — Risco, Ajuda, Bretanha, Lombas, Santa Bárbara and Lagoas, each defined by different activity phases in the volcano's evolution.