Structure of the Central North Aegean Trough: an active strike-slip deformation zone

Detailed interpretation of marine seismic data shows the presence of an extending, active, dextral strike-slip fault zone at the south edge of the Mount Athos Peninsula. The zone is over 100 km long and has both transtensional and transpressive features observable on the seismic lines. We suggest that dextral strike-slip displacement along the zone is on the order of 5–7 km. The structure and fault patterns of Recent deformation in the Central North Aegean Trough is typical of strike-slip tectonism.     

Architecture,structural and tectonic significance of the Seagap fault (offshore Tanzania) in the framework of the East African Rift

The Southeastern portion of the East African Rift System reactivates Mesozoic transform faults marking the separation of Madagascar from Africa in the Western Indian Ocean. Earlier studies noted the reactivation of the Davie Fracture Zone in oceanic lithosphere as a seismically active extensional fault, and new 3D seismic reflection data and exploration wells provide unprecedented detail on the kinematics of the sub-parallel Seagap fault zone in continental/transitional crust landward of the ocean-continent transition. We reconstruct the evolution of the seismically active Seagap fault zone, a 400-km-long crustal structure affecting the Tanzania margin, from the late Eocene to the present day. The Seagap fault zone is represented by large-scale localized structures affecting the seafloor and displaying growth geometries across most of the Miocene sediments. The continuous tectonic activity evident by our seismic mapping, as well as 2D deep seismic data from literature, suggests that from the Middle-Late Jurassic until 125 Ma, the Seagap fault acted as a regional structure parallel to, and coeval with, the dextral Davie Fracture Zone. The Seagap fault then remained active after the cessation of both seafloor spreading in the Somali basin and strike-slip activity on the Davie Fracture Zone, till nowaday. Its architecture is structurally expressed through the sequence of releasing and restraining bends dating back at least to the early Neogene. Seismic sections and horizon maps indicate that those restraining bends are generated by strike-slip reactivation of Cretaceous structures till the Miocene. Finally based on the interpretation of edge-enhanced reflection seismic surfaces and seafloor data, we shows that, by the late Neogene, the Seagap fault zone switched to normal fault behaviour. We discuss the Seagap fault's geological and kinematic significance through time and its current role within the microplate system in the framework of the East African rift, as well as implications for the evolution and re-activation of structures along sheared margins. The newly integrated datasets reveal the polyphase deformation of this margin, highlighting its complex evolution and the implications for depositional fairways and structural trap and seal changes through time, as well as potential hazards.     

Aftershock tectonics of the 1978 Tabas-e-Golshan (Iran) earthquake sequence: a documented active 'thin-and thick-skinned tectonic' case

Summary. In this study a locally recorded aftershock sequence of the 1978 Tabas-e-Golshan earthquake ( M_s = 7.4) was accurately located. Out of 1560 located events, 329 best-located aftershocks passed a strict quality criterion. These well-located aftershocks, which have uncertainties in epicentre and in focal depth of about 1 and 2 km respectively, together with the well-constrained focal mechanisms, provided a detailed picture of active continental deformation during an aftershock sequence.
Almost all aftershocks follow very closely the pattern of the earthquake faults at the surface and lie in the hanging-wall block of the active fault. The hypocentres occurred mainly at depths less than 23 km with a high concentration of seismic activity between 8–14 km depth. The aftershocks clearly demonstrate an active imbricate listric thrust system with fault planes flattening into a basement decollement zone, and the reactivation of different basement reverse faults in response to a considerable amount of shortening of the top sedimentary cover. The sense of motion was almost universally thrusting and the aftershocks shared the same tectonic causes as the main shock.
The study indicates that the development of the young fold-thrust mountain belts necessarily involves basement shortening (thin-and thick-skinned tectonics) and that the 'frontal reverse faults' in young active fold-thrust mountain belts are the most seismically active faults. Geological and seismic data propose that the active frontal reverse fault systems are possibly reactivated old normal faults and may add support to the contention of reversal of fault motion during re thickening of continental crust. The active 'thin-and thick-skinned tectonics' documented in this study may prevail in other young and active fold-thrust mountain belts which are characterized by a thick sequence of telescoped top sedimentary cover over a decollement detachment zone.     

Recent tectonics in the Turkana Rift (North Kenya): an integrated approach from drainage network, satellite imagery and reflection seismic analyses

The Turkana rifted zone in northern Kenya is a long‐lived and polyphased rift system where the lack of well‐marked rift morphology makes it difficult to identify the zone of active deformation. A high‐density river network is exceptionally well developed over the study area and shows evidence of drainage anomalies that suggest recent fault‐induced movements at various scales. Correlation of surface drainage anomalies with Landsat remote sensing and deep seismic reflection data permits to characterize the deep geometry of the inferred fault structures. Seismic stratigraphy further allows distinction between the inherited (Oligocene–Pliocene) and the newly formed (<3.7 Ma) origin of the recent deformation. Evidence for neotectonics are observed (1) along a large‐scale transverse (EW) fault rooted at depth along a steep basement discontinuity (Turkwell), (2) along a rift‐parallel (NS) fault zone probably emplaced during the Pliocene–Pleistocene and currently bounding the Napedet volcanic plateau to the west and (3) over a round‐shaped uplifted zone caused by positive inversion tectonics (Kalabata). The major contribution of this work is the recognition of a broad (80 km wide) zone of recent/active extensional deformation in the Turkana Rift in contrast with the narrow (20 km wide) N10°E‐trending axial trough forming the Suguta valley to the south, and the Chew Bahir faulted basin to the north. These along‐strike variations in structural style are partly controlled by the occurrence of rejuvenated Oligocene–Miocene rift faults and long‐lived transverse discontinuities in the Turkana Rift area. More generally, this study has implications for the use of river drainage network about recent/active extensional domains with subdued topography and slow deformation rate.     

The Nootka Fault Zone — a new plate boundary off western Canada

Summary. Relative motion across a boundary between the main Juan de Fuca plate and its northern extension, the Explorer plate, had earlier been suggested from sea-floor magnetic anomaly analysis and from earthquakes recorded on the western Canada land seismic network. The location of the boundary, called the Nootka fault zone, and the motion across it have been examined through seismic reflection profiles, accurate location of earthquakes with an array of ocean bottom seismometers and through analysis of magnetic, gravity and bathymetric data. The fault zone extends from a ridge-fault—fault triple point at the northern end of the Juan de Fuca ridge to a fault—trench—trench triple junction at the margin off north-central Vancouver Island. The active portion of the fault zone is about 20 km wide, and has produced extensive disturbance in the 0.5 to 1 km of overlying sediments. Magnetic anomaly analysis suggests present left-lateral strike slip motion of about 3 cm/yr, with convergence at the margin being more rapid to the south than to the north of the fault zone. Because of rapidly changing spreading parameters on the Explorer and Juan de Fuca ridges over the past 5 Myr the Nootka fault zone has had a very complex history.     

Local and regional components of western Aegean deformation extracted from 100 years of geodetic displacement measurements

Our objectives are as follows. First, we wish to develop a methodology to recover the long-term component of deformation from any set of distributed, time-averaged geodetic strain measurements that were subject to seismic disturbance, given a catalogue of local seismicity that occurred during the measurement period. Second, using seismic and geodetic data sets that span approximately 100 years, we apply this technique in the western Aegean to assess the role of local seismicity in regional deformation. The methodology is developed using a model for crustal deformation constructed from a long-term, smooth regional strain field combined with instantaneous, local perturbations from upper-crustal earthquakes approximated by static elastic dislocations. By inverting geodetic displacements for the smooth field while simultaneously floating influential but uncertain earthquake source parameters, an estimate of the regional component of deformation that is approximately independent of the seismicity can be made. In the western Aegean we find that the horizontal component of regional deformation can be described with minor inaccuracy by a quadratic relative displacement field. The principal horizontal extensional axes calculated from the regionally smooth displacement field agree in orientation with the T-axes of earthquakes in the region. These observations indicate that the instantaneous elastic strain of the 10 km thick seismogenic layer is driven by a stress field that is smooth on the scale of the geodetic network as a whole, 200-300 km.     

The relationship between seismic deformation and deep-seated gravitational movements during the 1997 Umbria–Marche (Central Italy) earthquakes

This paper re-evaluates the origin of some peculiar patterns of ground deformation in the Central Apennines, observed by space geodetic techniques during the two earthquakes of the Colfiorito seismic sequence on September 26th, 1997. The surface displacement field due to the fault dislocation, as modelled with the classic Okada elastic formulations, shows some areas with high residuals which cannot be attributed to non-simulated model complexities. The residuals were investigated using geomorphological analysis, recognising the geologic evidence of deep-seated gravitational slope deformations (DSGSD) of the block-slide type. The shape and direction of the co-seismic ground displacement observed in these areas are correlated with the expected pattern of movement produced by the reactivation of the identified DSGSD. At least a few centimetres of negative “Line of Sight” ground displacement was determined for the Costa Picchio, Mt. Pennino, and Mt. Prefoglio areas. A considerable horizontal component of movement in the Costa Picchio DSGSD is evident from a qualitative analysis of ascending and descending interferograms. The timing of the geodetic data indicates that the ground movement occurred during the seismic shaking, and that it did not progress appreciably during the following months. This work has verified the seismic triggering of DSGSD previously hypothesized by many researchers. A further implication is that in the assessment of DSGSD hazard seismic input needs to be considered as an important cause of accelerated deformation.     

Seismic reflection imaging of active offshore faults in the Gulf of Corinth: their seismotectonic significance

High resolution seismic reflection surveys over one of the most active and rapidly extending regions in the world, the Gulf of Corinth, have revealed that the gulf is a complex asymmetric graben whose geometry varies significantly along its length. A detailed map of the offshore faults in the gulf shows that a major fault system of nine distinct faults limits the basin to the south. The northern Gulf appears to be undergoing regional subsidence and is affected by an antithetic major fault system consisting of eight faults. All these major faults have been active during the Quaternary. Uplifted coastlines along their footwalls, growth fault patterns and thickening of sediment strata toward the fault planes indicate that some of these offshore faults on both sides of the graben are active up to present. Our data ground‐truth recent models and provides actual observations of the distribution of variable deformation rates in the Gulf of Corinth. Furthermore they suggest that the offshore faults should be taken into consideration in explaining the high extension rates and the uplift scenarios of the northern Peloponnesos coast. The observed coastal uplift appears to be the result of the cumulative effect of deformation accommodated by more than one fault and therefore, average uplift rates deduced from raised fossil shorelines, should be treated with caution when used to infer individual fault slip rates. Seismic reflection profiling is a vital tool in assessing seismic hazard and basin‐formation in areas of active extension.     

Evidence of quaternary transtensional tectonics in the Nekor basin (NE Morocco)

The geodynamic processes in the western Mediterranean are driven by both deep (mantle) processes such as slab‐rollback or delamination, oblique plate convergence and inherited structures. The present‐day deformation of the Alboran Sea and in particular the Nekor basin area is linked to these coeval effects. The seismically active Nekor basin is an extensional basin formed in a convergent setting at the eastern part of the Rif Chain whose boundaries extend both onshore and offshore Morocco. We propose a new structural model of the Nekor basin based on high‐resolution offshore data compiled from recent seismic reflection profiles, swath bathymetry acquisitions and industrial seismic reflection profiles. The new data set shows that the northern limit of the basin is oriented N49° with right‐stepping faults from the Bousekkour–Aghbal fault to the sinistral Bokkoya fault zone. This pattern indicates the presence of an inherited left‐lateral basement fault parallel to the major inherited Nekor fault. This fault has been interpreted as a Quaternary active left‐lateral transfer fault localized on weak structural discontinuities inherited from the orogenic period. Onshore and offshore active faults enclose a rhombohedral tectonic Nekor Basin. Normal faults oriented N155° offset the most recent Quaternary deposits in the Nekor basin, and indicate the transtensional behaviour of this basin. The geometry of these faults suggests a likely rollover structure and the presence at depth of a crustal detachment. Inactive Plio‐Quaternary normal faults to the east of the Ras Tarf promontory and geometries of depocentres seem to indicate the migration of deformation from east to west. The local orientations of horizontal stress directions deduced from normal fault orientations are compatible with the extrusion of the Rifian units and coherent with the westward rollback of the Tethyan slab and the localization of the present‐day slab detachment or delamination.     

Coseismic deformation revealed by inversion of strong motion and GPS data: the 2003 Chengkung earthquake in eastern Taiwan

A moderate earthquake of   M _w= 6.8  occurred on 2003 December 10. It ruptured the Chihshang Fault in eastern Taiwan which is the most active segment of the Longitudinal fault as a plate suture fault between the Luzon arc of the Philippine Sea plate and the Eurasian plate. The largest coseismic displacements were 13 cm (horizontal) and 26 cm (vertical). We analyse 40 strong motion and 91 GPS data to model the fault geometry and coseismic dislocations. The most realistic shape of the Chihshang fault surface is listric in type. The dipping angle of the seismic zone is steep (about 60°–70°) at depths shallower than 10 km and then gradually decreases to 40°–50° at depths of 20–30 km. Thus the polygonal elements in Poly3D are well suited for modelling complex surfaces with curving boundaries. Using the strong motion data, the displacement reaches 1.2 m dip-slip on the Chihshang Fault and decreases to 0.1 m near surface. The slip averages 0.34 m, releasing a scalar moment of 1.6E26 dyne-cm. For GPS data, our model reveals that the maximal dislocation is 1.8 m dip-slip. The dislocations decrease to 0.1 m near the surface. The average slip is 0.48 m, giving a scalar moment of 2.2E26 dyne-cm. Regarding post-seismic deformation, a displacements of 0.5 m were observed near the Chihshang Fault, indicating the strain had not been totally released, as a probable result of near-surface locking of the fault zone.     

Evidence for underthrusting beneath the Queen Charlotte Margin, British Columbia, from teleseismic receiver function analysis

The Queen Charlotte Fault zone is the transpressive boundary between the North America and Pacific Plates along the northwestern margin of British Columbia. Two models have been suggested for the accommodation of the ∼20 mm yr⁻¹ of convergence along the fault boundary: (1) underthrusting; (2) internal crustal deformation. Strong evidence supporting an underthrusting model is provided by a detailed teleseismic receiver function analysis that defines the underthrusting slab. Forward and inverse modelling techniques were applied to receiver function data calculated at two permanent and four temporary seismic stations within the Queen Charlotte Islands. The modelling reveals a ∼10 km thick low-velocity zone dipping eastward at 28° interpreted to be underthrusting oceanic crust. The oceanic crust is located beneath a thin (28 km) eastward thickening (10°) continental crust.     

Fault architecture, basin structure and evolution of the Gulf of Corinth Rift, central Greece

The style of extension and strain distribution during the early stages of intra-continental rifting is important for understanding rift-margin development and can provide constraints for lithospheric deformation mechanisms. The Corinth rift in central Greece is one of the few rifts to have experienced a short extensional history without subsequent overprinting. We synthesise existing seismic reflection data throughout the active offshore Gulf of Corinth Basin to investigate fault activity history and the spatio-temporal evolution of the basin, producing for the first time basement depth and syn-rift sediment isopachs throughout the offshore rift. A major basin-wide unconformity surface with an age estimated from sea-level cycles at ca . 0.4 Ma separates distinct seismic stratigraphic units. Assuming that sedimentation rates are on average consistent, the present rift formed at 1–2 Ma, with no clear evidence for along-strike propagation of the rift axis. The rift has undergone major changes in relative fault activity and basin geometry during its short history. The basement depth is greatest in the central rift (maximum ∼3 km) and decreases to the east and west. In detail however, two separated depocentres 20–50 km long were created controlled by N- and S-dipping faults before 0.4 Ma, while since ca . 0.4 Ma a single depocentre (80 km long) has been controlled by several connected N-dipping faults, with maximum subsidence focused between the two older depocentres. Thus isolated but nearby faults can persist for timescales ca . 1 Ma and form major basins before becoming linked. There is a general evolution towards a dominance of N-dipping faults; however, in the western Gulf strain is distributed across several active N- and S-dipping faults throughout rift history, producing a more complex basin geometry.     

Structural style and stratigraphic architecture of fault propagation folding in extensional settings: a seismic example from the Smørbukk area, Halten Terrace, Mid-Norway

A number of recent papers have stressed the importance of lateral and vertical fault propagation on sediment geometries in active rift settings. However, the majority of these studies have been based on outcrop data. This contribution addresses the evolution of a single, major normal fault and its interaction with adjacent active faults using high-resolution 3D seismic data from the Smørbukk and Smørbukk South hydrocarbon fields, Halten Terrace, Mid-Norway. The major fault dividing the two fields, the Trestakk–Smørbukk fault, evolves from a southern segment with a well-defined set of rift wedges in its hangingwall to a northern segment where the fault tip is buried and a fault-tip fold is developed. Isochore maps of three Jurassic intervals illustrate a south to north evolution where, initially, Early Jurassic fault activity is limited to the southern part of the study area. Middle to Upper Jurassic intervals display a northwards migration in activity and linkage with two other major faults in the study area. This northwards migration had a profound effect on sediment geometries and depocentres in an area where previously only Late Jurassic rift activity has been recognized.     

Seismic hazard in central southern Africa

Seismic hazard maps of central-southern Africa where hazard has been expressed in terms of peak ground acceleration for an annual probability in excess of 10^-1 show relatively high values that distinguish the seismic hazard potential of the Deka fault zone, the mid-Zambezi basin-Luangwa rift and western central Mozambique. In areas such as central-southern Africa where little is known about the geology of the region and the fault systems have not been fully mapped, seismic hazard potential may be estimated from seismicity and broad-scale fault features. For this region, such potential is based on earthquake magnitude M_s ≥ 6. Events of such magnitude have recently occurred in the mid-Zambezi basin, southern Zimbabwe and western-central Mozambique. This paper follows the conventional probabilistic hazard analysis procedure, defining seismic source zones from seismicity based on instrumental records from a cataloque that spans a period of 83 years. Geological and geomorphological features in the region are described on the mesoscale and are correlated with the seismicity as broad fault zones. The scarcity of strong-motion accelerogram data necessitated the formulation of attenuation values based on random vibration theory (RVT).     

Reactivation of basement faults: interplay of ice‐sheet advance,glacial lake formation and sediment loading

The Emme Delta is a small glacilacustrine delta, which developed on the southern flank of the Wesergebirge Mountains in NW Germany. Shallow shear‐wave seismic surveys allow a detailed assessment of the structural style of the delta body. Two different fault systems are developed within the delta, both showing syn‐sedimentary activity. The faults have planar to slightly listric geometries and show vertical offsets in a range of 2–15 m. They form small graben and half‐graben systems, which locally show roll‐over structures. The fill of the half‐grabens has a wedge‐shaped geometry, with the greatest sediment thickness close to the fault. The fault system in the upper portion of the Emme Delta is restricted to the delta body and probably gravity induced. In the lower portion of the delta, normal faults occur that originate in the underlying Jurassic basement rocks and penetrate into the delta deposits. The grid of seismic lines shows that the normal faults are trending E–W. This fits to a late Triassic–early Jurassic deformation phase in the Central European Basin System. We hypothese that these faults were reactivated during the Pleistocene by the advancing ice‐sheet, water and sediment loading. Based on the seismic data set, an overall model for the reactivation of the basement fault was developed. The advancing ice‐sheet caused far field extension, which might have reactivated pre‐existing normal faults. Later, the fault activity was enhanced due to sediment and water loading. In addition, high pore pressure due to lake formation might have supported the slip processes along the faults. After glacial unloading and lake drainage, the fault activity stopped.     

On the consistency of earthquake moment release and space geodetic strain rates: Europe

In this paper, approximately 100 VLBI/SLR/GPS velocities map European strain rates from <0.09 × 10⁻⁸ to >9.0 × 10⁻⁸ yr⁻¹ with regional uncertainties of 20 to 40 per cent. Kostrov's formula translates these strain-rate values into regional geodetic moment rates M¯˙ _geodetic . Two other moment rates, M¯˙ _seismic , extracted from a 100-year historical catalogue and M¯˙ _plate , taken from plate-tectonic models, contrast the geodetic rates. In Mediterranean Europe, the ratios of M¯˙ _seismic to M¯˙ _geodetic are between 0.50 and 0.71. In Turkey the ratio falls to 0.22. Although aseismic deformation may contribute to the earthquake deficit ( M¯˙ _seismic values less than M¯˙ _geodetic ), the evidence is not compelling because the magnitudes of the observed shortfalls coincide with the random variations expected in a 100-year catalogue. If the lack of aseismic deformation inferred from the 100-year catalogue holds true for longer periods, then much of Europe's strain budget would have to be accommodated by more frequent or larger earthquakes than have been experienced this century to raise the ratios of M¯˙ _seismic to M¯˙ _geodetic to unity. Improved geological fault data bases, longer historical earthquake catalogues, and densification of the continent's space geodetic network will clarify the roles of aseismic deformation versus statistical quiescence.     

Extensional tectonics during the Tyrrhenian back‐arc basin formation and a new morpho‐tectonic map

We present a new tectonic map focused upon the extensional style accompanying the formation of the Tyrrhenian back‐arc basin. Our basin‐wide analysis synthetizes the interpretation of vintage multichannel and single‐channel seismic profiles, integrated with modern seismic images, P‐wave velocity models, and high‐resolution morpho‐bathymetric data. Four distinct evolutionary phases of the Tyrrhenian back‐arc basin opening are further constrained, redefining the initial opening to Langhian/Serravallian time. Listric and planar normal faults and their conjugates bound a series of horst and graben, half‐graben and triangular basins. Distribution of extensional faults, active throughout the basin since Middle Miocene, allows us to define an arrangement of faults in the northern/central Tyrrhenian mainly related to a pure shear which evolved to a simple shear opening. At depth, faults accommodate over a Ductile‐Brittle Transitional zone cut by a low‐angle detachment fault. In the southern Tyrrhenian, normal, inverse and transcurrent faults appear to be related to a large shear zone located along the continental margin of the northern Sicily. Extensional style variation throughout the back‐arc basin combined with wide‐angle seismic velocity models allows to explore the relationships between shallow deformation, faults distribution throughout the basin, and crustal‐scale processes as thinning and exhumation.     

Initiation and evolution of fault-controlled slope-parallel submarine channels: Miocene eastern slope of Yinggehai Basin,South China Sea

Submarine channels act as the main conduits for the transport of sediment to deep-water basins by sediment gravity flows. The interplay between fault-related deformation and the initiation and development of the channels is poorly known. Here, we present the identification, formation and evolution of the Miocene slope-parallel channel by employing 3D seismic reflection, wireline-log and core data in the eastern slope of Yinggehai Basin, South China Sea. Based on the lengths and plan-view shapes, a total of three different types of fault-associated slope-parallel depressions have been identified. The depressions were formed in the fault zone and controlled by the reactivation of the underlying older faults. Among them, Type-1 depressions are short (<20 km) oval or circle shaped possessing only one depocenter. Type-2 depressions are elongated (25–70 km), and usually have multiple depocenters. Type-3 depressions, which are usually connected by slope-perpendicular channels in the head and middle, are longer (more than 190 km) and connect shallow and deep-water basins. The analysis of morphology, erosivity and material transport shows that Type-3 depressions are fully fledged channels. Type-1 and Type-2 depressions are channel precursors representing the initial stage of channel evolution. With this motive, a model for the initiation and evolution of slope-parallel submarine channels controlled by strike-slip-extensional faults is presented. Unlike the previous investigations which suggest that erosion takes place at the inception of submarine channel formation, the fault-controlled slope-parallel channel is mainly controlled by faulting and has no initial erosive base and does not develop levees. The depressions are extended and elongated by the continuous fault activity. It was not until the slope-parallel depression connected with large-scale slope-perpendicular channels transporting materials into the depression via erosive turbidity currents that it evolved into a channel-levee system. This study is of global importance for understanding submarine channel generation and evolution since the fault-controlled slope-parallel channels have been found in tectonic active basins worldwide.     

Strike‐slip tectonics and basin inversion in the Western Mediterranean: the Post‐Messinian evolution of the Alboran Sea

A comprehensive interpretation of single and multichannel seismic reflection profiles integrated with biostratigraphical data and log information from nearby DSDP and ODP wells has been used to constrain the late Messinian to Quaternary basin evolution of the central part of the Alboran Sea Basin. We found that deformation is heterogeneously distributed in space and time and that three major shortening phases have affected the basin as a result of convergence between the Eurasian and African plates. During the Messinian salinity crisis, significant erosion and local subsidence resulted in the formation of small, isolated, basins with shallow marine and lacustrine sedimentation. The first shortening event occurred during the Early Pliocene (ca. 5.33–4.57 Ma) along the Alboran Ridge. This was followed by a major transgression that widened the basin and was accompanied by increased sediment accumulation rates. The second, and main, phase of shortening on the Alboran Ridge took place during the Late Pliocene (ca. 3.28–2.59 Ma) as a result of thrusting and folding which was accompanied by a change in the Eurasian/African plate convergence vector from NW‐SE to WNW‐ESE. This phase also caused uplift of the southern basins and right‐lateral transtension along the WNW‐ENE Yusuf fault zone. Deformation along the Yusuf and Alboran ridges continued during the early Pleistocene (ca. 1.81–1.19 Ma) and appears to continue at the present day together with the active NNE‐SSW trending Al‐Idrisi strike‐slip fault. The Alboran Sea Basin is a region of complex interplay between sediment supply from the surrounding Betic and Rif mountains and tectonics in a zone of transpression between the converging African and European plates. The partitioning of the deformation since the Pliocene, and the resulting subsidence and uplift in the basin was partially controlled by the inherited pre‐Messinian basin geometry.     

Seismotectonic implications of relocated aftershock sequences in Iran and Turkey

Summary. Six aftershock sequences in Iran and Turkey are relocated using existing teleseismic data. Two of these are in the Zagros mountains where local fieldwork has failed to detect subcrustal seismicity but published teleseismic locations show depths greater than 100 km. All apparently deep events are shown to be small and badly recorded with poor depth resolution. There is thus no evidence for active lithospheric subduction in the Zagros.
Relocations of other sequences in Iran and Turkey are used with fault plane solutions, satellite photographs and surface faulting to provide new insight on the geometry of faulting and crustal deformation of those regions. Linear seismic trends from these sequences are shown to cut older geological structures and do not always bear a simple relation to surface faulting. In such cases aftershock activity may be on primary buried faults whose behaviour is not simply revealed in surface structure and deformation.
A linearized inversion scheme is used to investigate the trade-off between resolution and uncertainty in the hypocentral parameters. The ultimate resolution of teleseismic locations is shown to be limited by the quality of arrival time data.