Along strike changes in the structural evolution over a brittle detachment fault: Example of the Pleistocene Corinth–Patras rift (Greece)

The Patras, Corinth, and northern Saronic gulfs occupy a 200-km-long, N120° trending Pleistocene rift zone, where Peloponnese drifts away from mainland Greece. The axes of Patras and Corinth basins are 25 km apart and linked by two transfer-fault zones trending N040°. The older one defines the western slope of Panachaïkon mountain, and the younger one limits the narrow Rion–Patras littoral plain. Between these two faults, the ca. 4-km-thick Rion–Patras series dips 20–30° SSW. It is part of the Patras gulf synrift deposits, which pile in an asymmetric basin governed by a fault dipping ca. 25–35° NNE, located in the southern Gulf of Patras. Mapping of this fault to the east in northern Peloponnese shows that it is an inactive north-dipping low-angle normal fault (0° to 30°N), called the northern Peloponnese major fault (NPMF). The structural evolution of the NPMF was different in the gulfs of Patras and Corinth. In the Gulf of Patras, it is still active. In northern Peloponnese, footwall uplift and coeval southward tilting flattened the fault and locked its southern part. Steeper normal faults formed north of the locked area, connecting the still active northern part of the NPMF to the surface. After several locks, the presently active normal faults (Psathopyrgos, Aigion, Helike) trend along the southern shore of the Gulf of Corinth. This migration of faults caused the relative 25 km northward shift of the Corinth basin, and the formation of NE–SW trending transfer-faults between the Corinth and Patras gulfs.     

Tectonic geomorphology of the Kemalpaşa Basin and surrounding horsts,southwestern part of the Gediz Graben,Western Anatolia

The Kemalpa?a Basin is one of the Quaternary basins in Western Anatolia and represents the south-western branch of the Gediz Graben system in this extensional province. This basin has been formed under the NNE–SSW trending extensional tectonic regime. It is bounded by a major fault, the Kemalpa?a Fault, in the south and it is bounded by a number of downstepping faults, called as Spilda?? Fault Zone, in the north. Both margin-bounding faults of the Kemalpa?a Basin are oblique-slip normal faults. In order to better understand the activities of these faults, we investigated the tectonic geomorphology of the Kemalpa?a Basin and interpreted the effect of tectonic activity on the geomorphological evolution using geomorphic markers such as drainage basin patterns, facet geometries and morphometric indices such as hypsometric curves and integral (HI), basin shape index (B_s), valley floor width-to-height ratio (V_f) and mountain front sinuosity (S_mf). The morphometric analysis of 30 drainage basins in total and mountain fronts bounding the basin from both sides suggests a relatively high degree of tectonic activity. The mountain front sinuosity (S_mf) generally varies from 1.1 to 1.3 in both sides of the basin suggesting the active fronts and facet slopes (12°–32°) suggest a relatively high degree of activity along the both sides of the Kemalpa?a Basin. Similarly, the valley floor width-to-height ratios (V_f) obtained from the both sides indicate low values varying from 0.043 to 0.92, which are typical values (<1) for tectonically active mountain fronts. The all values obtained are lower for the southern side. Therefore, we suggest that the tectonic activity of the Kemalpa?a Fault higher than the Spilda?? Fault Zone. This difference that can be arised from the different uplift rates also reveals the typical asymmetric characteristics of the Kemalpa?a Basin. Additionally, the trapezoidal facets which have been observed on the southern side of the basin indicate that the Kemalpa?a Fault is evolutionally more active as compared to the Spilda?? Fault Zone. The geomorphic indices indicate that the Quaternary landscape evolution of the Kemalpa?a Basin was governed by tectonic and erosional processes, and also the all results of morphometric analysis suggest a relatively high degree of tectonic activity along the faults bounding the Kemalpa?a Basin. Moreover, considering that active large normal faults with an average 15 km long can cause major earthquake, the earthquake hazard in the Kemalpa?a Basin should be investigated in detailed paleoseismological studies.     

Transtensional deformation in the Lake Tahoe region, California and Nevada, USA

Dextral transtensional deformation is occurring along the Sierra Nevada–Great Basin boundary zone (SNGBBZ) at the eastern edge of the Sierra Nevada microplate. In the Lake Tahoe region of the SNGBBZ, transtension is partitioned spatially and temporally into domains of north–south striking normal faults and transitional domains with conjugate strike-slip faults. The normal fault domains, which have had large Holocene earthquakes but account only for background seismicity in the historic period, primarily accommodate east–west extension, while the transitional domains, which have had moderate Holocene and historic earthquakes and are currently seismically active, primarily record north–south shortening. Through partitioned slip, the upper crust in this region undergoes overall constrictional strain.Major fault zones within the Lake Tahoe basin include two normal fault zones: the northwest-trending Tahoe–Sierra frontal fault zone (TSFFZ) and the north-trending West Tahoe–Dollar Point fault zone. Most faults in these zones show eastside down displacements. Both of these fault zones show evidence of Holocene earthquakes but are relatively quiet seismically through the historic record. The northeast-trending North Tahoe–Incline Village fault zone is a major normal to sinistral-oblique fault zone. This fault zone shows evidence for large Holocene earthquakes and based on the historic record is seismically active at the microearthquake level. The zone forms the boundary between the Lake Tahoe normal fault domain to the south and the Truckee transition zone to the north.Several lines of evidence, including both geology and historic seismicity, indicate that the seismically active Truckee and Gardnerville transition zones, north and southeast of Lake Tahoe basin, respectively, are undergoing north–south shortening. In addition, the central Carson Range, a major north-trending range block between two large normal fault zones, shows internal fault patterns that suggest the range is undergoing north–south shortening in addition to east–west extension.A model capable of explaining the spatial and temporal partitioning of slip suggests that seismic behavior in the region alternates between two modes, one mode characterized by an east–west minimum principal stress and a north–south maximum principal stress as at present. In this mode, seismicity and small-scale faulting reflecting north–south shortening concentrate in mechanically weak transition zones with primarily strike-slip faulting in relatively small-magnitude events, and domains with major normal faults are relatively quiet. A second mode occurs after sufficient north–south shortening reduces the north–south S_hmax in magnitude until it is less than S_v, at which point S_v becomes the maximum principal stress. This second mode is then characterized by large earthquakes on major normal faults in the large normal fault domains, which dominate the overall moment release in the region, producing significant east–west extension.     

Quantifying geomorphic evolution of earthquake-triggered landslides and their relation to active normal faults. An example from the Gulf of Corinth, Greece

Photogrammetric analysis of aerial photographs is used to investigate morphological changes in two large landslides located adjacent to the active Marathias normal fault along the Gulf of Corinth, Greece. This E–W trending fault intersects at almost right angles a series of west-verging and east-dipping thrust faults, and has a clear geomorphic expression. The fault's structural signature, such as the trace length, displacement, segmentation, and scarp freshness resembles other normal faults within the Gulf of Corinth. Along this fault we mapped a series of landslides that are mainly concentrated at the near tip areas. Two of them are hosted in the damage zone formed by the intersecting normal and reverse faults. The Marathias and Sergoula landslides show a significant geomorphic evolution on aerial photographs from 1945 to 1991.

Evolution of landslides in the study area appears to be correlated with two earthquake clusters that drive mass wasting in the order of 10⁶ m³, significant drainage adjustment, and triggering of post-landslide river incision. We infer the following process sequence for these presumably earthquake-triggered landslides in the region: eroded material in Marathias landslide and reactivation of movement within the main body of the Sergoula landslide were observed in 1969 aerial photographs. Both landslides are deep-seated rotational rockslides. Obstruction or abandonment of channels due to the landslides establishes river incision and a dramatic increase of the rate of fan-delta progradation in the order of 1 m/yr. These large landslides are related to strong (M > 6.5) earthquakes concentrated along faults, and their reactivation period is almost a century, based on seismological or paleoseismological analyses.     

Paleostress analysis of the brittle deformations on the northwestern margin of the Red Sea and the southern Gulf of Suez,Egypt

Shear fractures, dip-slip, strike-slip faults and their striations are preserved in the pre- and syn-rift rocks at Gulf of Suez and northwestern margin of the Red Sea. Fault-kinematic analysis and paleostress reconstruction show that the fault systems that control the Red Sea–Gulf of Suez rift structures develop in at least four tectonic stages. The first one is compressional stage and oriented NE–SW. The average stress regime index R' is 1.55 and S_Hmax oriented NE–SW. This stage is responsible for reactivation of the N–S to NNE, ENE and WNW Precambrian fractures. The second stage is characterized by WNW dextral and NNW to N–S sinistral faults, and is related to NW–SE compressional stress regime. The third stage is belonging to NE–SW extensional regime. The S_Hmax is oriented NW–SE parallel to the normal faults, and the average stress regime R' is equal 0.26. The NNE–SSW fourth tectonic stage is considered a counterclockwise rotation of the third stage in Pliocene-Pleistocene age. The first and second stages consider the initial stages of rifting, while the third and fourth represent the main stage of rifting.     

Geomorphic evidence for active tectonic deformation in the coastal part of Eastern Black Sea,Eastern Pontides,Turkey

The Eastern Pontides (EP), which is the under transpressional deformation zone, is an active mountain belt that has been rising rapidly since the Cenozoic era because of the Arabian-Eurasian convergence. Morphometric studies have been performed to investigate the tectonic activity of this region and better understand the characteristics of the faults geomorphologically; the faults control the mountain fronts in the drainage basin of the EP. The results show the Hypsometric Curve (HC)-Hypsometric Integral (0.37-HI-0.67), Basin-Shaped Analysis (1.2-B_s-7), Valley-Floor-Width to Height-Ratio (0.4-V_f-1.2) and Asymmetry Factor (35-AF-81) applied to 46 drainage basins together with 9 tectonically controlled geomorphic indices (1.2-S_mf-1.5) and a Stream Length Gradient (30-S_L-120) indicate that the EP is tectonically active, and when the areas are evaluated according to S_mf and V_f analyses, the tectonic level is relatively high. According to our conceptual model for the uplifting of the EP, with respect to field studies and morphometric analysis, (i) the EP is the active deformation zone and has a “push-up” geometry in conjunction with the North Anatolian Fault; (ii) the EP is progressively uplifting at a rate of more than 0.5 mm/yr in along with the thrust faults of the Black Sea Fault (BSF) and Borjomi-Kazbegi Fault (BKF).     

Scaling properties within the Gulf of Corinth, Greece; comparison between offshore and onshore active faults

The Gulf of Corinth, Greece, is a 110-km-long by 30-km-wide active graben displaying strong seismicity hosted both on north and south dipping normal faults. This complex fault pattern consists of two fault populations, offshore and onshore. The offshore fault population is investigated by densely arranged seismic reflection profiles during the last 20 years, whereas the onshore fault population displays spectacular and well exposed faults, delineated by high accuracy mapping. We analyzed fault length and throw, in order to study the scaling properties of 136 well-determined offshore and onshore faults and the comparison between the two datasets. We examined the statistical properties on both fault populations, in order to describe the role of segmentation in the growth of faults and the different stages of the evolution of the fault networks.Our results on power law relationships associated with the scaling properties of the fault zones in the Gulf of Corinth, suggest that both fault populations are bi-fractal, providing the initiation of a sature state in deformation. In addition, the vertical throw of faults shows that both fault populations have similar properties but different distributions below and above 5 km, respectively. Displacement–length ratios, show that faults larger than 9 km appear to accumulate throw without any dramatic change to their length. These observations combined with other geophysical studies within the Gulf, suggest that the characteristic fault lengths of 5 km and 9 km can be correlated to the crustal mechanical structure and the seismicity of the Gulf.     

Brittle normal faulting in the highest-grade Sambagawa metamorphic rocks of central Shikoku, southwest Japan: Indication of the exhumation into the upper crustal level

Analysis of fault system in the high-P/T type Sambagawa metamorphic rocks of central Shikoku, southwest Japan, shows that conjugate normal faults pervasively developed in the highest-grade biotite zone (upper structural level) in three study areas (Asemi river, Oriu and Niihama areas). These conjugate normal faults consist of NE–SW to E–W striking and moderately north-dipping (set A), and NNW–SSE striking and moderately east dipping (set B) faults. The fault set A is dominant compared to the fault set B, and hence most of deformation is accommodated by the fault set A, leading to non-coaxial deformation. The sense of shear is inferred to be a top-to-the-WNW to NNW, based on the orientations of striation or quartz slickenfibre and dominant north-side down normal displacement. These transport direction by normal faulting is significantly different from that at D₁ penetrative ductile flow (i.e. top-to-the-W to WNW). It has also been found that these conjugate normal faults are openly folded during the D₃ phase about the axes trending NW–SE to E–W and plunging west at low-angles or horizontally, indicating that normal faulting occurred at the D₂ phase. D₂ normal faults, along which actinolite breccia derived from serpentinite by metasomatism sometimes occurs, perhaps formed under subgreenschist conditions (ca. 250 °C) in relation to the final exhumation of Sambagawa metamorphic rocks into the upper crustal level. The pervasive development of D₂ normal faults in the upper structural level suggests that the final exhumation of Sambagawa metamorphic rocks could be caused by “distributed extension and normal faulting (removal of overburden)” in the upper crust.     

Analogue and numerical modeling of normal fault patterns produced due to slip along a detachment zone

In this paper, we investigate normal fault patterns produced by the sliding motion along a gently dipping normal fault by using analogue model tests and numerical modeling. The motivation for this study was offered by microseismic test data that indicate the existence of an active low-angle shear zone at a depth of 9–11 km in the extensional region of high seismic activity of the Gulf of Corinth (Greece). Both modeling techniques seem to support the hypothesis that the system of high-angle normal faults that are responsible for the final asymmetrical graben formation initiate at the tip of the active basal detachment nearest to the free surface. The normal faults propagate upwards with progressive sliding of the inclined basal plane, resulting in a first phase of symmetrical graben configuration that is delimited by a main synthetic fault and an antithetic fault forming a Rankine zone. Subsequent sliding on the inclined base induces a family of secondary antithetic normal faults, which are responsible for the asymmetry of the failure pattern and the diffusive character of deformation in that area. Shear deformation is more intense and localized along the synthetic normal fault than along the antithetic faults. Elaboration on the analogue test results has led to the phenomenological relations among four main parameters that describe the geometry of grabens, namely, (i) the width and (ii) the maximum subsidence of the graben, (iii) the dip angles of the conjugate normal faults, and (iv) the amount of sliding along the low-angle normal fault. However, analogue models do not produce the system of synthetic faults that is observed in the Gulf of Corinth. The effects of both friction angle variation along the detachment base and of the constitutive behavior of the model material on the configuration of the final structural pattern were also studied with a series of numerical continuum models. It was found that (a) the fault pattern of the Gulf of Corinth may be reproduced with either a strain-softening material with low elastic modulus or a constant strength material, and (b) two consecutive grabens, such as those of Gulfs of Corinth and Evia, may also be reproduced by an appropriate combination of variation of dip and frictional properties along the hypothesized detachment zone.     

Appraisal of relative tectonic activity along the Kazerun Fault Zone,Zagros Mountains,Iran: insight from spatial analysis of geomorphic indices

This paper investigates the impact of active tectonics on the geomorphic processes and landscape evolution along the Kazerun Fault Zone (KFZ) in the Zagros Mountains of Iran using spatial analysis of geomorphic indices. We document how topography and morphology are influenced by active tectonic deformation. The Zagros fold–thrust belt is an area of active crustal shortening where northwest–southeast oriented fault‐related folds become younger from north to south and from southeast to northwest. This temporal and spatial evolution of the belt was tested using geomorphic indices of active tectonics that include mountain front sinuosity index (Smf), the valley width/height ratio (Vf), drainage basin asymmetry factor, hypsometric integral, drainage basin shape ratio and mean axial slope of the channel. Change in the geomorphic indices is the result of active fold growth and change in the uplift rate. Decreasing Smf and Vf values from north (Smf = 2.01; Vf = 0.5) to south (Smf = 1.12; Vf = 0.2) and from southeast (Smf = 1.84; Vf = 0.8) to northwest (Smf = 1.54; Vf = 0.1) points to a migration of the active crustal shortening towards W–SW. The combined geomorphic (field evidences) and morphometric data (quantitative analysis of geomorphic indices) provide evidence of relative variation in the tectonic activity along the Kazerun Fault Zone and related landforms. The utilization of geomorphic parameters with comparison to the field observations exhibits change in relative tectonic activities mostly corresponding to the change in mechanism of the prominent fault zones in the study area. Copyright © 2014 John Wiley & Sons, Ltd.     

Statistical approach for the geochemical signature of two active normal faults in the western Corinth Gulf Rift (Greece)

Soil–gas measurements of different gas species were performed in two distinct areas of the Corinth Gulf Rift (Greece): the Aigion-Neos Erineos-Lambiri (ANEL) fault zone and the Rion-Patras fault zone. Both zones lie in one of the most seismically active areas of the Euro-Mediterranean region, where a fast-opening continental rift is located. In particular, the geochemical investigations were focused on fault segments and fracture systems previously inferred by geomorphological, lithological and structural studies.In this work the applicability of soil–gas geochemistry surveys for the exploration of buried/hidden faults was tested by using various statistical methods. Moreover, a comprehensive geostatistical treatment of the collected data provided new insights into the control exerted by active structures on deep-seated gas migration towards the surface. In both investigated areas, the highest ²²²Rn and CO₂ concentration peaks correspond with zones where the interaction among fracture and fault segments was inferred by structural and morphological methods. This indicates a clear correlation between the shape and orientation of the anomalies and the different attitude and kinematic behavior of the faults recognized in the two areas. Furthermore, obtained results show that gases migrate preferentially through zones of brittle deformation by advective processes, as suggested by the relatively high rate of migration needed to obtain anomalies of short-lived ²²²Rn in the soil pores.     

The 1984 Abruzzo earthquake (Italy): an example of seismogenic process controlled by interaction between differently oriented synkinematic faults

The evolution of the seismogenic process associated with the M_s 5.8 Sangro Valley earthquake of May 1984 (Abruzzo, central Italy) is closely controlled by the Quaternary extensional tectonic pattern of the area. This pattern is characterised by normal faults mainly NNW striking, whose length is controlled by pre-existing Mio–Pliocene N100±10° left-lateral strike-slip fault zones. These are partly re-activated as right-lateral normal-oblique faults under the Quaternary extensional regime and behave as transfer faults.Integration of re-located aftershocks, focal mechanisms and structural features are used to explain the divergence between the alignment of aftershocks (WSW–ENE) and the direction of seismogenic fault planes defined by the focal mechanisms (NNW–SSE) of the main shock and of the largest aftershock (M_s=5.3).The faults that appear to be involved in the seismogenic process are the NNW–SSE Barrea fault and the E–W M. Greco fault. There is field evidence of finite Quaternary deformation indicating that the normal Barrea fault re-activates the M. Greco fault as right-lateral transfer fault. No surface faulting was observed during the seismic sequence. The apparently incongruent divergence between aftershocks and nodal planes may be explained by interpreting the M. Greco fault as a barrier to the propagation of earthquake rupturing. The rupture would have nucleated on the Barrea fault, migrating along-strike towards NNW. The sharp variation in direction from the Barrea to the M. Greco fault segments would have represented a structural complexity sufficient to halt the rupture and subsequent concentration of post-seismic deformation as aftershocks around the line of intersection between the two fault planes.Fault complexities, similar to those observed in the Sangro Valley, are common features of the seismic zone of the Apennines. We suggest that the zones of interaction between NW–SE and NNW–SSE Plio-Quaternary faults and nearly E–W transfer faults, extending for several kilometres in the same way as M. Greco does, might act as barriers to the along-strike propagation of rupture processes during normal faulting earthquakes. This might have strong implications on seismic hazard, especially for the extent of the maximum magnitude expected on active faults during single rupture episodes.     

Relative tectonic activity assessment of the Çameli Basin,Western Anatolia,using geomorphic indices

Western Anatolia is one of the world’s most seismically active regions. A nearly N–S-oriented extension caused the formation of E–W- and NE–SW-trending major grabens, creating the potential for earthquakes with magnitudes ≥ 5. The fault segments of the NE-trending Çameli Basin were evaluated using geomorphic indices, common tools for assessment of relative tectonic activity in such areas. Quantitative measurement of geomorphic indices including mountain-front sinuosity (Smf; 1.35–2.39), valley floor width-to-height ratios (Vf; 0.08?0.37), and hypsometric integral (HI; 0.31–1.05) suggest relatively higher tectonic activity along western and southern part of the basin. Hypsometric curves for all segments of the faults mostly exhibit concave or straight profiles, signifying existence of young mountain fronts in the Çameli Basin. These calculations indicate that the Çameli Basin is tectonically active and, southern/south-western areas of this depression have earthquake potential, consistent with epicentres of recent earthquakes, occurred along some fault segments. Possible reason of this activity seems to be related to the E–W-trending corridor lying between the Gulf of Gökova and south-eastern part of the Çameli Basin, represented by active normal faults. These findings should be valid beyond the Çameli Basin for similar situations along the Isparta Angle’s western margin.     

Study of active faults: Theoretical and applied implications

Theoretical and applied implications of the study of active faults and their identification and parametrization are discussed. The term active fault is defined as a fault with displacements that occurred in the late Pleistocene and Holocene and are expected to resume in the future. The displaced young landforms, late Quaternary sediments, and man-made constructions are the main reference marks to recognize active faults and estimate their kinematics and intensity. Since the structural pattern and parameters of all active faults are referred to the same, geologically short time interval, they are important for the study of recent geodynamics and young tectogenesis on the global, regional, and local scales. The opportunities that are opened for such investigations are illustrated by verification of the real existence of the Okhotsk and Bering minor plates. With allowance for active faults, it is possible to make tectonic and geodynamic reconstructions of the past events more plausible. Natural hazards, primarily, earthquakes, are related to active faults. The geological and geomorphic assessment of the seismic potential of active fault zones is discussed with emphasis on the maximum possible magnitude of earthquakes (M _max) estimated from the segmentation of the active zones, the length of particular segments (L), the empirical relationships M _max/L for strong recent earthquakes, as well as the resumption periods of strong earthquakes and measurement of particular seismogenic offsets by trenching and other techniques, including archeoseismological methods. A question is posed about possible perennial variations in the stress-and-strain state of active zones, which are expressed on the scale of large seismoactive regions in oscillations of released seismic energy and should be taken into account by assessment of the seismic hazard.     

The role of small‐scale fold and fault development in seismogenic zones: example of the western Huércal‐Overa Basin (eastern Betic Cordillera,Spain)

The NW–SE shortening between the African and the Eurasian plates is accommodated in the eastern Betic Cordillera along a broad area that includes large N‐vergent folds and kilometric NE–SW sinistral faults with related seismicity. We have selected the best exposed small‐scale tectonic structures located in the western Huércal‐Overa Basin (Betic Cordillera) to discuss the seismotectonic implications of such structures usually developed in seismogenic zones. Subvertical ESE–WNW pure dextral faults and E–W to ENE–ESW dextral‐reverse faults and folds deform the Quaternary sediments. The La Molata structure is the most impressive example, including dextral ESE–WNW Neogene faults, active southward‐dipping reverse faults and associated ENE–WSW folds. A molar M1 assigned to Mimomys savini allows for precise dating of the folded sediments (0.95–0.83 Ma). Strain rates calculated across this structure give ～0.006 mm a^?1 horizontal shortening from the Middle Pleistocene up until now. The widespread active deformations on small‐scale structures contribute to elastic energy dissipation around the large seismogenic zones of the eastern Betics, decreasing the seismic hazard of major fault zones. Copyright © 2009 John Wiley & Sons, Ltd.     

Structural style and fault kinematics of the Lower Eocene Rus Formation at Jabal Hafit area,Al Ain,United Arab Emirates (UAE)

The current contribution presents aspects of the structural style and fault kinematics of the Rus Formation that expose at Jabal Hafit, Al Ain, United Arab Emirates. Although the major structure of Jabal Hafit is an anticlinal fold, fractures (joints and faults) are the prominent structure of the study area. The fractures can be interpreted as the distributed effect of deep-seated basement fault reactivation or to be as reactivation of deep-seated basement faults. These fractures were created during two main tectonic stress regimes. The first is a WNW–ESE S _Hmax strike-slip stress regime, responsible for producing E–W to ESE–WNW joints and E–W dextral strike-slip and NNE–SSW reverse faults. This stress is interpreted to be post-Early Eocene in age and related to the second phase of thrusting in the Oman Mountains in the Miocene. The second stress regime is a NNE–SSW S _Hmax transtensional (strike-slip extensive) stress regime that was responsible for N–S to NNE–SSW striking joints and NE–SW sinistral strike-slip and N–S normal faults. This regime is interpreted to be post-Middle Eocene in age. This stress was the response to the collision of the Arabian–Eurasian Plates which began during the Late Eocene and continues to the present day.     

Solution transfer syn-S2: an inferred means of deriving fault fill in the lake Moondarra area, Mt. Isa, Queensland, Australia, based on oxygen isotope results

Many of the faults within the Lake Moondarra area cropout as wide zones which are filled with massive or fibrous milky quartz. Additionally, a variety of rock fragments from the surrounding metasediments are present in the fault zones. The second regional slaty cleavage, S₂, is locally observed through the quartz and country rock fragments within some of the zones, indicating that these fault fills originated pre- or early syn-S₂. The absence of the first regional slaty cleavage, S₁, suggests that the fault fills developed post or late syn-S₁. Evidence supporting an early syn-S₂ timing for the development of these fills is provided by the results of oxygen isotope analysis carried out on quartz specimens collected from the faults and also by the nature of the quartz. Specimens of quartz taken from the various fault zones have δ¹⁸O values between 12.4 and 14.5‰. This suggests that metamorphic water isotopically equilibrated with connate formation water was the aqueous fluid which transported the silica. δ¹⁸O values for the silica in the quartz-rich, sometimes dolomitic, metasediments of the Mount Isa and Haslingden Groups within the Lake Moondarra area are similar to the quartz within the fault fills. The lack of any metamorphic event between the first and second deformation, together with the sometimes fibrous nature of the fault-filling material with fibres parallel to the mineral elongation in S₂ (i.e. L₂²), suggests that the quartz in the faults was derived syntectonically at grain to grain contacts in the metasediments within the Lake Moondarra area, early in the development of S₂. The quartz is believed to have moved by the process of solution transfer to the faults as they underwent dilation during D₂. Subsequently the quartz was precipitated as a result of a chemical potential gradient.     

Stress field in the central and northern parts of the Gulf of Suez area,Egypt from earthquake fault plane solutions

Earthquake focal mechanism solutions from 18 events in the central and northern parts of the Gulf of Suez with local magnitudes ranging from 2.8 to 5.2 and occurring between 1983 and 2004 are used to determine the type of motion and stress pattern of the region. Fault plane solutions show mostly normal component; pure normal faulting mechanisms and normal faulting with a strike-slip component. Only some mechanisms show pure strike-slip faulting. The fault planes strike in NW, WNW, NNE and ENE directions, in conformity with the geologically observed striking faults in the northern and central parts of the gulf. The principal stress orientation is also estimated by inverting the selected focal mechanism solutions. The results show that the northern part of the Gulf is subjected to NE–SW to NNE–SSW extension, with a horizontal σ₃ (plunge 3°) and subvertical σ₁ (plunge 80°). This means that the horizontal extensional stresses are still present in the central/northern Gulf of Suez.     

Tectonics of the Northern Bresse region (France) during the Alpine cycle

Combining fieldwork and surface data, we have reconstructed the Cenozoic structural and tectonic evolution of the Northern Bresse. Analysis of drainage network geometry allowed to detect three major fault zones trending NE–SW, E–W and NW–SE, and smooth folds with NNE trending axes, all corroborated with shallow well data in the graben and fieldwork on edges. Cenozoic paleostress succession was determined through fault slip and calcite twin inversions, taking into account data of relative chronology. A N–S major compression, attributed to the Pyrenean orogenesis, has activated strike-slip faults trending NNE along the western edge and NE–SW in the graben. After a transitional minor E–W trending extension, the Oligocene WNW extension has structured the graben by a collapse along NNE to NE–SW normal faults. A local NNW extension closes this phase. The Alpine collision has led to an ENE compression at Early Miocene. The following WNW trending major compression has generated shallow deformation in Bresse, but no deformation along the western edge. The calculation of potential reactivation of pre-existing faults enables to propose a structural sketch map for this event, with a NE–SW trending transfer fault zone, inactivity of the NNE edge faults, and possibly large wavelength folding, which could explain the deposit agency and repartition of Miocene to Quaternary deformation.     

Quaternary tectonics in the Gulf of Patras, western Greece

Air gun seismic and 3.5 kHz profiling data from the Gulf of Patras, western Greece, show that it is occupied by a small asymmetric graben with several geometric similarities to the larger-scale graben in the Gulf of Corinth to the east. Major listric faulting characterizes the southern flank of the graben whilst the northern flank represents an associated rollover structure affected by antithetic and synthetic faulting. The present phase of subsidence is of Holocene age, but buried growth faults suggest earlier subsidence in the Gulf. The average rate of subsidence through the Holocene is estimated to be 10 mm/year.The Gulf of Patras graben, together with the Gulf of Corinth graben and the Megara basin, represent a continuous system of WNW-ESE trending grabens in a broad zone of intense seismicity within the Aegean domain. Individual grabens are offset and are interconnected by NE-SW trending fault systems.