Elevator tectonics and orogenic collapse of a Tibetan-style plateau in the European Variscides: the role of the Bohemian shear zone

Variscan collision of peri-Gondwanan terranes led to a doubly vergent crustal wedge that was thicker than 55 km in the area of the Bohemian Massif. This crustal thickness resulted in a highly elevated Bohemian plateau with a topographic height >3–4 km. The Bohemian plateau was covered with unmetamorphic Paleozoic strata, all of which are today well preserved in the Tepla–Barrandian unit because of crustal-scale vertical slip along the Bohemian shear zone (BSZ). The BSZ forms a subvertical, ca. 500-km long and up to 2-km wide belt of dip–slip mylonites which show several 90° deflections in map view. Tepla-Barrandian-down movements were active under retrograde metamorphic conditions, starting with granulite and ceasing with greenschist facies conditions. As slip along the BSZ was largely vertical and led to a minimum throw of 10 km, this type of crustal-scale deformation is referred to as elevator tectonics. The elevator-style movements caused the juxtaposition of the supracrustal Tepla–Barrandian lid (the “elevator”) against high-grade rocks of the extruding orogenic root. The BSZ has further governed the foci of mantle-derived plutonism. New U–Pb zircon and monazite TIMS dating of six plutons suggest that emplacement of mantle-derived melts along the BSZ lasted for at least 20 m.y., starting with the emplacement of the Klatovy granodiorite at 347 +4/−3 Ma and ceasing with the emplacement of the Drahotin pluton at 328 ± 1 Ma. When taking into account the new ages of synkinematic plutons, the simultaneous vertical slip along the individual segments of the BSZ (North, West, and Central Bohemian shear zone) is bracketed to the period 343–337 Ma. Elevator tectonics was probably controlled by delamination of thickened mantle lithosphere that caused a dramatic thermal turnover and heating-up of the orogenic root. The overheated lower crust was thermally softened by anatexis and diffusion creep resulting in channel flow, vertical extrusion, fast uplift, and exhumation of the orogenic root.     

Clasts of Variscan high-grade rocks within Upper Viséan conglomerates – constraints on exhumation history from petrology and U-Pb chronology

In this paper, U‐Pb zircon, monazite and rutile data for crystalline rocks deposited as clasts in the Upper Viséan conglomerates at the eastern margin of the Bohemian Massif are reported. U‐Pb data of spherical zircon from three different granulite clasts yielded a mean age of 339.0 ± 0.7 Ma (±2σ), while oval and spherical grains of another granulite pebble define a slightly younger date of 337.1 ± 1.1 Ma. These ages are interpreted as dating granulite facies metamorphism. Thermochronology and the derived pressure–temperature (P–T) path of the granulite pebbles reflect two‐stage exhumation of the granulites. Near‐to‐isothermal decompression from at least 44 km to mid‐crustal depths of around 22 km was followed by a near‐isobaric cooling stage based on reaction textures and geothermobarometry. Minimum average exhumation rate corresponds to 2.8–4.3 mm year^?1. The extensive medium‐pressure/high‐temperature overprint on granulite assemblages is dated by U‐Pb in monazite at c. 333 Ma. This thermal event probably has a close link to generation and emplacement of voluminous Moldanubian granites, including the cordierite granite present in clasts. This granite was emplaced at mid‐crustal levels at 331 ± 3 Ma (U‐Pb monazite), whereas the U‐Pb zircon ages record only a previous magmatic event at c. 378 Ma. Eclogites and garnet peridotites normally associated with high‐pressure granulites are absent in the clasts but exotic subvolcanic and volcanic members of the ultrapotassic igneous rock series (durbachites) of the Bohemian Massif have been found in the clasts. It is therefore assumed that the clasts deposited in the Upper Viséan conglomerates sampled a structurally higher tectonic unit than the one that corresponds to the present denudation level of the Moldanubicum of the Bohemian Massif. The strong medium‐temperature overprint on granulites dated at c. 333 Ma is attributed to the relatively small size of the entirely eroded bodies compared with the presently exposed granulites.     

Zircon (re)crystallization during short‐lived,high‐P granulite facies metamorphism (Eger Complex,NW Bohemian Massif)

The Eger Complex in the northwestern Bohemian Massif consists mainly of amphibolite facies granitic gneisses containing a subordinate volume of felsic granulites. Microstructural changes and modelling of metamorphic conditions for both rock types suggest a short‐lived static heating from ~760 to ~850 °C at a constant pressure of ~16 kbar, which led to the partial granulitization of the granitoid rocks. Detailed study of the protolith zircon modifications and modelling of the Zr re‐distribution during the transition from amphibolite to granulite facies suggests that the development of c. 340 Ma old zircon rims in the granulite facies sample is the result of recrystallization of older (c. 475 Ma) protolith zircon. This study suggests that the partial granulitization is a result of a short exposure of the Eger Complex metagranitoids to a temperature of ~850 °C at the base of an arc/fore‐arc domain and their subsequent rapid exhumation during the Lower Carboniferous collision along the western margin of the Bohemian Massif.     

Apatite fission-track dating and low-temperature history of the Bavarian Forest (southern Bohemian Massif)

Apatite fission-track (AFT) dating applied to uplifted Variscan basement blocks of the Bavarian Forest is employed to unravel the low-temperature history of this segment of the Bohemian Massif. Twenty samples were dated and confined track lengths of four samples were measured. Most samples define Cretaceous APT ages between 110 and 82 Ma (Albian to Campanian) and three samples give older ~148–140 Ma (Jurassic–Cretaceous boundary) ages. No discernible regional age variations exist between the areas north-east and south-west of the Pfahl shear zone, but >500 m post-Jurassic and post-Cretaceous vertical offsets along this and other faults can be inferred from elevation profile analyses. The AFT ages clearly postdate the Variscan exhumation history of the Bavarian Forest. Thermal modeling reveals that the ages are best explained by a slight reheating of the basement rocks to temperatures within the apatite partial annealing zone during the middle and late Jurassic and/or by late Cretaceous marine transgression causing burial heating, which affected marginal low-lying areas of the Bohemian Massif and the Bavarian Forest. Late Jurassic period was followed by enhanced cooling through the 120–60 °C temperature interval during the subsequent exhumation phase for which denudation rates of ~100 m myr^?1 were calculated. On a regional scale, Jurassic–Cretaceous AFT ages are ubiquitous in marginal structural blocks of the Bohemian Massif and seem to reflect the exhumation of these zones more distinctly compared to central parts.     

Monazite in a Variscan mylonitic paragneiss from the Münchberg Metamorphic Complex (NE Bavaria) records Cadomian protolith ages

Small oval‐shaped, unshielded monazite grains found in a Variscan garnet–muscovite‐bearing mylonitic paragneiss from the Liegendserie unit of the Münchberg Metamorphic Complex in the northwestern Bohemian Massif, central Europe, yield only pre‐Variscan ages. These ages, determined with the electron microprobe, have maxima at c. 545, 520 and 495 Ma and two side‐maxima at 455 and 575 Ma, and are comparable with previously determined ages of detrital zircon reported from paragneisses elsewhere in the NW Bohemian Massif. The pressure (P)–temperature (T) history of this mylonitic paragneiss, determined from contoured P–T pseudosections, involved an initial stage at 6 kbar/600 °C, reaching peak P–T conditions of 12.5 kbar/670 °C with partial melting, followed by mylonitization and retrogression to 9 kbar/610 °C. The monazite, representing detrital grains derived from igneous rocks of a Cadomian provenance between 575 and 455 Ma, has survived these Variscan metamorphic/deformational events unchanged because this mineral has probably never been outside its P–T stability field during metamorphism.     

Crustal structure at the easternmost termination of the Variscan belt based on CELEBRATION 2000 and ALP 2002 data

The eastern margin of the Variscan belt in Europe comprises plate boundaries between continental blocks and terranes formed during different tectonic events. The crustal structure of that complicated area was studied using the data of the international refraction experiments CELEBRATION 2000 and ALP 2002. The seismic data were acquired along SW–NE oriented refraction and wide-angle reflection profiles CEL10 and ALP04 starting in the Eastern Alps, passing through the Moravo-Silesian zone of the Bohemian Massif and the Fore-Sudetic Monocline, and terminating in the TESZ in Poland. The data were interpreted by seismic tomographic inversion and by 2-D trial-and-error forward modelling of the P waves. Velocity models determine different types of the crust–mantle transition, reflecting variable crustal thickness and delimiting contacts of tectonic units in depth. In the Alpine area, few km thick LVZ with the Vp of 5.1 km s^− 1 dipping to the SW and outcropping at the surface represents the Molasse and Helvetic Flysch sediments overthrust by the Northern Calcareous Alps with higher velocities. In the Bohemian Massif, lower velocities in the range of 5.0–5.6 km s^− 1 down to a depth of 5 km might represent the SE termination of the Elbe Fault Zone. The Fore-Sudetic Monocline and the TESZ are covered by sediments with the velocities in the range of 3.6–5.5 km s^− 1 to the maximum depth of 15 km beneath the Mid-Polish Trough. The Moho in the Eastern Alps is dipping to the SW reaching the depth of 43–45 km. The lower crust at the eastern margin of the Bohemian Massif is characterized by elevated velocities and high Vp gradient, which seems to be a characteristic feature of the Moravo-Silesian. Slightly different properties in the Moravian and Silesian units might be attributed to varying distances of the profile from the Moldanubian Thrust front as well as a different type of contact of the Brunia with the Moldanubian and its northern root sector. The Moho beneath the Fore-Sudetic Monocline is the most pronounced and is interpreted as the first-order discontinuity at a depth of 30 km.     

Azimuthal variation of Pg velocity in the Moldanubian, Czech Republic: observations based on a multi-azimuthal common-shot experiment

We study the azimuthal velocity variation of Pg waves in the Moldanubian, which is a crystalline segment within the Bohemian Massif in the Czech Republic. We use the data from a multi-azimuthal common-shot experiment performed as part of the ALP 2002 refraction experiment, complemented by profile refraction data from the CELEBRATION 2000 experiment. We analyze the travel times of waves recorded by 72 portable seismic stations deployed along two circles with radii of 35 and 45 km around a shot. The observed travel times display an azimuthal variation indicating anisotropy of 2%. The minimum and maximum velocity values are 5.83 and 5.95 km/s, respectively. The direction of the maximum velocity is N50°E. These values characterize horizontal anisotropy of the uppermost crust down to 3 km. The strength and orientation of uppermost crustal anisotropy in the Moldanubian is consistent with the overall upper crustal anisotropy in the entire Bohemian Massif. The high-velocity direction is roughly perpendicular to the present-day maximum compressive stress in the Bohemian Massif and Central Europe and coincides with the orientation of structures formed by the main Variscan tectonic events in the area. This indicates that the anisotropy is caused predominantly by alignment of textural elements and minerals in the rocks, which developed in early geological stages rather than by a preferred orientation of cracks or microcracks due to present-day stress. If the crack-induced anisotropy is present in the medium, then its strength should not exceed 1% and the cracks should be water saturated.     

Two-stage exhumation of subducted Saxothuringian continental crust records underplating in the subduction channel and collisional forced folding (Krkonoše-Jizera Mts., Bohemian Massif)

The Krkonoše-Jizera Massif in the northern part of the Variscan Bohemian Massif provides insight into the exhumation mechanisms for subducted continental crust. The studied region exposes a relatively large portion of a flat-lying subduction-related complex that extends approximately 50 km away from the paleosuture. wide extent of HP-LT metamorphism has been confirmed by new P-T estimates indicating temperatures of 400–450 °C at 14–16 kbar and 450–520 °C at 14–18 kbar for the easternmost and westernmost parts of the studied area, respectively. A detailed study of metamorphic assemblages associated with individual deformation fabrics together with analysis of quartz deformation microstructures and textures allowed characterisation of the observed deformation structures in terms of their subduction-exhumation memory. An integration of the lithostratigraphic, metamorphic and structural data documents a subduction of distal and proximal parts of the Saxothuringian passive margin to high-pressure conditions and their subsequent exhumation during two distinct stages. The initial stage of exhumation has an adiabatic character interpreted as the buoyancy driven return of continental material from the subduction channel resulting in underplating and progressive nappe stacking at the base of the Teplá-Barrandian upper plate. With the transition from continental subduction to continental collision during later stages of the convergence, the underplated high-pressure rocks were further exhumed due to shortening in the accretionary wedge. This shortening is associated with the formation of large-scale recumbent forced folds extending across the entire studied area.     

Interplay between an axial channel belt,slope gullies and overbank deposition in the Puchkirchen Formation in the Molasse Basin,Austria

Deep‐water sediments in the Molasse Basin, Austria, were deposited in a narrow foreland basin dominated by a large channel belt located between the steep Alpine fold and thrust belt to the south and the gentler northern slope off the Bohemian Massif. Several gas fields occur outside the channel belt, along the outer bend of a large meander. Accumulation of these overbank sediments reflects a complicated interplay between slope accommodation and debris‐flow and turbidity‐flow interaction within the channel. The tectonically oversteepened northern slope of the basin (ca 2 to 3°) developed a regionally important erosional surface, the Northern Slope Unconformity, which can be traced seismically for >100 km in an east–west direction and >20 km from the channel to the north. The slope preserves numerous gullies sourced from the north that eroded into the channel belt. These gullies were ca 20 km long, <1 km wide and ca 200 m deep. As the channel aggraded, largely inactive and empty gullies served as entry points into the overbank area for turbidity currents within the axial channel. Subsequently, debris‐flow mounds, 7 km wide and >15 km long, plugged and forced the main channel to step abruptly ca 7 km to the south. This resulted in development of an abrupt turn in the channel pathway that propagated to the east and probably played a role in forming a sinuous channel later. As debris‐flow topography was healed, flows spread out onto narrow area between the main channel and northern slope forming a broad fine‐grained apron that serves as the main gas reservoir in this area. This model of the overbank splay formation and the resulting stratigraphic architecture within the confined basin could be applied in modern and ancient systems or for subsurface hydrocarbon reservoirs where three‐dimensional seismic‐reflection data is limited. This study elucidates the geomorphology of the oversteepened slope of the under‐riding plate and its effects on the sedimentation.     

Two types of ultrapotassic plutonic rocks in the Bohemian Massif — Coeval intrusions at different crustal levels

We present U–Pb zircon age determinations of two Variscan ultrapotassic plutonic rocks from the Moldanubian Zone (Bohemian Massif). Equant, multifaceted zircons without inherited cores from a two-pyroxene–biotite quartz monzonite of the Jihlava Pluton yielded a precise age of 335.12 ± 0.57 Ma, interpreted as dating magma crystallization. The majority of both tabular and prismatic grains from the amphibole–biotite melagranite (“durbachite”) from the T?ebí? Pluton plot along a discordia intersecting the concordia at 334.8 ± 3.2 Ma; prismatic zircon grains commonly contain inherited cores and yield an upper intercept age of 2.2 Ga, indicating early Proterozoic inheritance. We therefore suggest that both types of the ultrapotassic plutonic rocks from the Bohemian Massif crystallized at ca 335 Ma, and the previously published ages higher than ca 340 Ma for “durbachites” were biased by a small amount of unresolved inheritance. The ultrapotassic magma emplacement in the middle crust was related to rapid exhumation of a deep crustal segment, considered as isothermal decompression between high-pressure (～ 340 Ma) and medium-pressure (～ 333 Ma) stages recorded in granulites. Mineral assemblages as well as external and internal zircon morphology suggest that the Jihlava intrusion was deep and dry, whereas the T?ebí? intrusion was shallow and wet. Low ε_Hf values of zircons (? 4.4 to ? 7.5) in both rock types suggest a similar source with a predominant crustal component. However, inherited grains in the T?ebí? melagranite indicate its contamination with crustal material during emplacement, and thus possibly a slower rate of exhumation and/or of magma ascent through the crust.     

Boundaries of mantle–lithosphere domains in the Bohemian Massif as extinct exhumation channels for high-pressure rocks

Five domains (microplates) have been recognized by seismic anisotropy in the mantle lithosphere of the Bohemian Massif. The mantle domains correspond to major crustal units and each of the domains bears a consistent fossil olivine fabric formed before their Variscan assembly. The present-day mantle fabric indicates that this process consisted of at least three oceanic subductions, each followed by an underthrusting of the continental lithosphere. The seismic anisotropy does not detect remnants of the oceanic subductions, but it can trace boundaries of the preserved continental domains subsequently underthrust along the paths of previous oceanic subductions. The most robust continent–continent collision was followed by westward underthrusting of the Brunovistulian mantle lithosphere, still detectable by seismic anisotropy more than 100 km beneath the Moldanubian mantle lithosphere. Major occurrences of the high-pressure/ultra high-pressure (HP–UHP) rocks follow the ENE and NNE oriented sutures and boundaries of the mantle–lithosphere domains mapped from three-dimensional modeling of body-wave anisotropy. The HP–UHP rocks are products of oceanic subductions and the following underthrusting of the continental crust and mantle lithosphere exhumed along the mantle boundaries. The close relation of the mantle sutures and occurrences of the HP–UHP rocks near the paleosubductions testifies for models interpreting the granulite–garnet peridotite association by oceanic/continental subduction/underthrusting followed by the exhumation of deep-seated rocks. Our findings support the bivergent subduction model of tectonic development of the central part of the Bohemian Massif. The inferences from seismic anisotropy image the Bohemian Massif as a mosaic of microplates with a rigid mantle lithosphere preserving a fossil olivine fabric. The collisional mantle boundaries, blurred by tectonometamorphic processes in easily deformed overlying crust, served as major exhumation channels of the HP–UHP rocks.     

Diachronic metamorphic and structural evolution of the Connecticut Valley–Gaspé trough,Northern Appalachians

The Connecticut Valley–Gaspé (CVG) trough represents a major, orogen-scale Silurian–Devonian basin of the Northern Appalachians. From Gaspé Peninsula to southern New England, the CVG trough has experienced a contrasting metamorphic and structural evolution during the Acadian orogeny. Along its strike, the CVG trough is characterized by increasing strain and polyphase structures, and by variations in the intensity of regional metamorphism and contrasting abundance of c. 390–370 Ma granitic intrusions. In southern Quebec and northern Vermont, a series of NW–SE transects across the CVG trough have been studied in order to better understand these along-strike variations. Detailed structural analyses, combined with phase equilibria modelling, Raman spectrometry, and muscovite ⁴⁰Ar/³⁹Ar dating highlight a progressive and incremental deformation involving south–north variation in the timing of metamorphism. Deformation evolves from a D₁ crustal thickening event which originates in Vermont and progresses to southern Québec where it peaked at 0.6 GPa/380°C at c. 375 Ma. This was followed by a D₂ event associated with continuous burial in Vermont from 378 to 355 Ma, which produced peak metamorphic conditions of 0.85 GPa/380°C and exhumation in Quebec from 368 to 360 Ma. The D₃ compressional exhumation event also evolved from south to north from 345 to 335 Ma. D₁ to D₃ deformation events form part of a continuum with an along-strike propagation rate of ~50 km/Ma During D₁, the burial depth varied by more than 15 km between southern Quebec and Vermont, and this can be attributed to the occurrence of a major crustal indenter, the Bronson Hill Arc massif, in the New England segment of the Acadian collision zone.     

Metamorphic record of the Asemi‐gawa eclogite unit in the Sanbagawa belt,southwest Japan: Constraints from inclusions study in garnet porphyroblasts

The Sanbagawa belt is one of the famous subduction‐related high‐pressure (HP) metamorphic belts in the world. However, spatial distributions of eclogite units in the belt have not yet satisfactorily established, except within the Besshi region, central Shikoku, southwest Japan because most eclogitic rocks were affected by lower pressure overprinting during exhumation. In order to better determine the areal distribution of the eclogite units and their metamorphic features, inclusion petrography of garnet porphyroblasts using a combination of electron probe microanalyser and Raman spectroscopy was applied to pelitic and mafic schists from the Asemi‐gawa region, central Shikoku. All pelitic schist samples are highly retrogressed, and include no index HP minerals such as jadeite, omphacite, paragonite, or glaucophane in the matrix. Garnet porphyroblasts in pelitic schists occur as subhedral or anhedral crystals, and show compositional zoning with irregular‐shaped inner segments and overgrown outer segments, the boundary of which is marked by discontinuous changes in spessartine. This feature suggests that a resorption process of the inner segment occurred prior to the formation of the outer segment, indicating discontinuous crystallization between the two segments. The inner segment of some composite‐zoned garnet grains displays Mn oscillations, implying infiltration of metamorphic fluid during the initial exhumation stage. Evidence for an early eclogite facies event was determined from mineral inclusions (e.g., jadeite, paragonite, glaucophane) in the garnet inner segments. Mafic schists include no index HP minerals in the matrix as with pelitic schists. Garnet grains in mafic schists show simple normal zoning, recording no discontinuous growth during crystal formation. There are no index HP mineral inclusions in the garnet, and thus no evidence suggesting eclogite facies conditions. Quartz inclusions in garnet of the pelitic and mafic schists show residual pressure values (?ω₁) of >8.5 cm^?1 and <8.5 cm^?1 respectively. The combination of Raman geobarometry and conventional thermodynamic calculations gives peak P–T conditions of 1.6–2.1 GPa at 460–520°C for the pelitic schists. The ?ω₁ values of quartz inclusions in mafic schists are converted to a metamorphic pressure of 1.2–1.4 GPa at 466–549°C based on Raman geothermometry results. These results indicate that a pressure gap definitely exists between the mafic schists and the almost adjacent pelitic schists, which have experienced a different metamorphic history. Furthermore, the peak P–T values of the Asemi‐gawa eclogite unit are compatible with those of Sanbagawa eclogite unit in the Besshi region of central Shikoku, suggesting that these eclogite units share a similar P–T trajectory. The Asemi‐gawa eclogite unit exists in a limited area and is composed of mostly pelitic schists. We infer that these abundant pelitic schists played a key role in buoyancy‐driven exhumation by reducing bulk rock density and strength.     

The tectono‐metamorphic evolution of the very low‐grade hangingwall constrains two‐stage gneiss dome formation in the Montagne Noire (Southern France)

The Montagne Noire in the southernmost French Massif Central is made of an ENE‐elongated gneiss dome flanked by Palaeozoic sedimentary rocks. The tectonic evolution of the gneiss dome has generated controversy for more than half a century. As a result, a multitude of models have been proposed that invoke various tectonic regimes and exhumation mechanisms. Most of these models are based on data from the gneiss dome itself. Here, new constraints on the dome evolution are provided based on a combination of very low‐grade petrology, K–Ar geochronology, field mapping and structural analysis of the Palaeozoic western Mont Peyroux and Faugères units, which constitute part of the southern hangingwall of the dome. It is shown that southward‐directed Variscan nappe‐thrusting (D₁) and a related medium‐P metamorphism (M₁) are only preserved in the area furthest away from the gneiss dome. The regionally dominant pervasive tectono‐metamorphic event D₂/M₂ largely transposes D₁ structures, comprises a higher metamorphic thermal gradient than M₁ (transition low‐P and medium‐P metamorphic facies series) and affected the rocks between c. 309 and 300 Ma, post‐dating D₁/M₁ by more than 20 Ma. D₂‐related fabrics are refolded by D₃, which in its turn, is followed by dextral‐normal shearing along the basal shear zone of both units at c. 297 Ma. In the western Mont Peyroux and Faugères units, D₂/M₂ is largely synchronous with shearing along the southern dome margin between c. 311 and 303 Ma, facilitating the emplacement of the gneiss dome into the upper crust. D₂/M₂ also overlaps in time with granitic magmatism and migmatization in the Zone Axiale between c. 314 and 306 Ma, and a related low‐P/high‐T metamorphism at c. 308 Ma. The shearing that accompanied the exhumation of the dome therefore was synchronous with a peak in temperature expressed by migmatization and intrusion of melts within the dome, and also with the peak of metamorphism in the hangingwall. Both, the intensity of D₂ fabrics and the M₂ metamorphic grade within the hangingwall, decrease away from the gneiss dome, with grades ranging from the anchizone–epizone boundary to the diagenetic zone. The related zonation of the pre‐D₃ metamorphic field gradients paralleled the dome. These observations indicate that D₂/M₂ is controlled by the exhumation of the Zone Axiale, and suggest a coherent kinematic between the different crustal levels at some time during D₂/M₂. Based on integration of these findings with regional geological constraints, a two‐stage exhumation of the gneiss dome is proposed: during a first stage between c. 316 and 300 Ma dome emplacement into the upper crust was controlled by dextral shear zones arranged in a pull‐apart‐like geometry. The second stage from 300 Ma onwards was characterized by northeast to northward extension, with exhumation accommodated by north‐dipping detachments and hangingwall basin formation along the northeastern dome margin.     

Very high-pressure (>4 GPa) eclogite associated with the Moldanubian Zone garnet peridotite (Nové Dvory, Czech Republic)

Equilibrium pressure–temperature (P–T) conditions were estimated for kyanite‐bearing eclogite from Nové Dvory, Czech Republic, by using garnet–clinopyroxene thermometry and garnet–clinopyroxene–kyanite–coesite (or quartz) barometry. The estimated P–T conditions are 1050–1150 °C, 4.5–4.9 GPa, which are mostly the same as previously estimated values for garnet peridotite from Nové Dvory (～1100–1250 °C, 5–6 GPa). Such very high‐P conditions, which correspond to about 150‐km depth, have been obtained for some garnet peridotites in the Gföhl Unit of the Bohemian Massif, but pressure conditions of eclogites associated with the garnet peridotites have not been so well constrained. This is the first substantial finding of eclogite that gives such very high‐P conditions in the Gföhl Unit of the Bohemian Massif. The Gföhl Unit mainly consists of felsic granulite or migmatitic gneiss, but these rock types do not display high‐P (>2.5 GPa) evidence. It is unclear whether both the peridotite body and surrounding felsic rocks in the Gföhl Unit were buried to very deep levels, but at least some garnet peridotites and associated eclogites in the Gföhl Unit have ascended from about 150‐km depth.     

Experimental constraints on ultrapotassic magmatism from the Bohemian Massif (durbachite series, Czech Republic)

The equilibrium phase relations of a mafic durbachite (53 wt.% SiO₂) from the Třebíč pluton, representative of the Variscan ultrapotassic magmatism of the Bohemian Massif (338–335 Ma), have been determined as a function of temperature (900–1,100°C), pressure (100–200 MPa), and H₂O activity (1.1–6.1 wt.% H₂O in the melt). Two oxygen fugacity ranges were investigated: close to the Ni–NiO (NNO) buffer and 2.6 log unit above NNO buffer (∆NNO + 2.6). At 1,100°C, olivine is the liquidus phase and co-crystallized with phlogopite and augite at 1,000°C for the whole range of investigated pressure and water content in the melt. At 900°C, the mineral assemblage consists of augite and phlogopite, whereas olivine is not stable. The stability field of both alkali feldspar and plagioclase is restricted to low pressure (100 MPa) at nearly water-saturated conditions (<3–4 wt.% H₂O) and T < 900°C. A comparison between experimental products and natural minerals indicates that mafic durbachites have a near-liquidus assemblage of olivine, augite, Ti-rich phlogopite, apatite and zircon, followed by alkali feldspar and plagioclase, similar to the mineral assemblage of minette magma. Natural amphibole, diopside and orthopyroxene were not reproduced experimentally and probably result from sub-solidus reactions, whereas biotite re-equilibrated at low temperature. The crystallization sequence olivine followed by phlogopite and augite reproduces the sequence inferred in many mica-lamprophyre rocks. The similar fractionation trends observed for durbachites and minettes indicate that mafic durbachites are probably the plutonic equivalents of minettes and that K- and Mg-rich magmas in the Bohemian Massif may have been generated from partial melting of a phlogopite–clinopyroxene-bearing metasomatized peridotite. Experimental melt compositions also suggest that felsic durbachites can be generated by simple fractionation of a more mafic parent and mixing with mantle-derived components at mid crustal pressures.     

The structure of the earth's crust and the heat-flow—heat-generation relationship in the Bohemian Massif

The relationship between terrestrial heat flow and heat generation of rocks was examined in the region of Proterozoic crystalline schists (Crystalinicum) of the Bohemian Massif at 18 sites. It has been shown that it is not possible to fit a single straight line to the heat-flow—heat-generation plot for the whole area investigated. It is necessary to consider for different parts of the Bohemian Massif how the different values of the heat flow q₀, originating at greater depths, influence the measured surface value q. In the paper it is explained that different values of q₀ are not caused by different heat flow through the M-discontinuity but predominantly by the different fabric of the lower crust.     

Post‐Variscan exhumation of the Central Anti‐Atlas (Morocco) constrained by zircon and apatite fission‐track thermochronology

The origin of the Anti‐Atlas relief is one of the currently debated issues of Moroccan geology. To constrain the post‐Variscan evolution of the Central Anti‐Atlas, we collected nine samples from the Precambrian basement of the Bou Azzer‐El Graara inlier for zircon and apatite fission‐track thermochronology. Zircon ages cluster between 340 ± 20 and 306 ± 20 Ma, whereas apatite ages range from 171 ± 7 Ma to 133 ± 5 Ma. Zircon ages reflect the thermal effect of the Variscan orogeny (tectonic thickening of the ca. 7 km‐thick Paleozoic series), likely enhanced by fluid advection. Apatite ages record a complex Mesozoic–Cenozoic exhumation history. Track length modelling yields evidence that, (i) the Precambrian basement was still buried at ca. 5 km depth by Permian times, (ii) the Central Anti‐Atlas was subjected to (erosional) exhumation during the Triassic‐Early Cretaceous, then buried beneath ca. 1.5 km‐thick Cretaceous‐Paleogene deposits, (iii) final exhumation took place during the Neogene, contemporaneously with that of the High Atlas.     

A review of the pre-Permian geology of the Variscan French Massif Central

The Massif Central, like the southern part of the Massif Armoricain, belongs to the north Gondwana margin. The Massif Central consists of a stack of nappes resulting from six main tectonic-metamorphic events. The first, D₀, is coeval with a Late Silurian (ca 415 Ma) high-pressure (HP) (or ultra high-pressure) metamorphism for which the associated structures are poorly documented. The Early Devonian D₁ event, responsible for top-to-the-southwest nappe displacement, is coeval with migmatization and the exhumation of HP rocks around 385–380 Ma. In the northern part of the Massif Central, metamorphic rocks with retrogressed eclogites are covered by Late Devonian undeformed sedimentary rocks. The Late Devonian-Early Carboniferous D₂ event involves top-to-the-northwest shearing, coeval with an intermediate pressure-temperature metamorphism dated around 360–350 Ma. The Visean D₃ event is a top-to-the-south ductile shearing, which is widespread in the southern Massif Central. Coevally, in the northern Massif Central, the D₃ event corresponds to the onset of synorogenic extension. The next two events, D₄ and D₅, of Early and Late Carboniferous age, correspond to the syn- and late orogenic extensional tectonic regimes, respectively. The former is controlled by NW–SE stretching whereas the latter is accommodated by NNE–SSW stretching. These structural and metamorphic events are reconsidered in a geodynamic evolution model. The possibilities of one or two cycles involving microcontinent drifting, rewelding and collision are discussed.     

Magmatic to solid state fabrics in syntectonic granitoids recording early Carboniferous orogenic collapse in the Bohemian Massif

The ∼354–336 Ma Central Bohemian Plutonic Complex is a Variscan magmatic arc that developed in the central Bohemian Massif in response to subduction of the Saxothuringian lithosphere beneath the Teplá–Barrandian microplate. Magmatic to solid state fabrics in the most voluminous portion of this arc (the ∼346 Ma Blatná pluton) record two superposed orogenic events: dextral transpression associated with arc-parallel stretching and arc-perpendicular shortening, and normal shearing associated with exhumation of the high-grade core of the orogen (Moldanubian unit). This kinematic switch is an important landmark in the evolution of this segment of the Variscan belt for it marks the cessation of subduction-related compressive forces in the upper crust giving way to gravity-driven normal movements of the Teplá–Barrandian hanging wall block relative to the high-grade Moldanubian footwall. We use thermal modeling to demonstrate that the emplacement of huge volumes of arc magmas and their slow cooling produced a thermally softened domain in the upper crust and that the magmatic arc granitoids may have played a major role in initiating the orogenic collapse in the Bohemian Massif through lubrication and reactivation of a pre-existing lithospheric boundary and decreasing the overall strength of the rigid orogenic lid.