Alpine and pre-Alpine magmatism in the root-zone of the western Central Alps

 The highest grade of metamorphism and associated structural elements in orogenic belts may be inherited from earlier orogenic events. We illustrate this point using magmatic and metamorphic rocks from the southern steep belt of the Lepontine Gneiss Dome (Central Alps). The U-Pb zircon ages from an anatectic granite at Verampio and migmatites at Corcapolo and Lavertezzo yield 280–290 Ma, i.e., Hercynian ages. These ages indicate that the highest grade of metamorphism in several crystalline nappes of the Lepontine Gneiss Dome is pre-Alpine. Alpine metamorphism reached sufficiently high grade to reset the Rb-Sr and K-Ar systematics of mica and amphibole, but generally did not result in crustal melting, except in the steep belt to the north of the Insubric Line, where numerous 29 to 26 Ma old pegmatites and aplites had intruded syn- and post-kinematically into gneisses of the ductile Simplon Shear Zone. The emplacement age of these pegmatites gives a minimum estimate for the age of the Alpine metamorphic peak in the Monte Rosa nappe. The U-Pb titanite ages of 33 to 31 Ma from felsic porphyritic veins represent a minimum-age estimate for Alpine metamorphism in the Sesia Zone. A porphyric vein emplaced at 448±5 Ma (U-Pb monazite) demonstrates that there existed a consolidated Caledonian basement in the Sesia Zone. Received: 23 May 1995/Accepted: 12 October 1995     

The DAV and Periadriatic fault systems in the Eastern Alps south of the Tauern window

Alpine deformation of Austroalpine units south of the Tauern window is dominated by two kinematic regimes. Prior to intrusion of the main Periadriatic plutons at ~30 Ma, the shear sense was sinistral in the current orientation, with a minor north-side-up component. Sinistral shearing locally overprints contact metamorphic porphyroblasts and early Periadriatic dykes. Direct Rb-Sr dating of microsampled synkinematic muscovite gave ages in the range 33-30 Ma, whereas pseudotachylyte locally crosscutting the mylonitic foliation gave an interpreted ⁴⁰Ar-³⁹Ar age of ~46 Ma. The transition from sinistral to dextral (transpressive) kinematics related to the Periadriatic fault occurred rapidly, between solidification of the earlier dykes and of the main plutons. Subsequent brittle-ductile to brittle faults are compatible with N-S to NNW-SSE shortening and orogen-parallel extension. Antithetic Riedel shears are distinguished from the previous sinistral fabric by their fine-grained quartz microstructures, with local pseudotachylyte formation. One such pseudotachylyte from Speikboden gave a ⁴⁰Ar-³⁹Ar age of 20 Ma, consistent with pseudotachylyte ages related to the Periadriatic fault. The magnitude of dextral offset on the Periadriatic fault cannot be directly estimated. However, the jump in zircon and apatite fission-track ages establishes that the relative vertical displacement was ~4-5 km since 24 Ma, and that movement continued until at least 13 Ma.     

Geochronological constraints on the evolution of the Periadriatic Fault System (Alps)

Fault rocks from various segments of the Periadriatic fault system (PAF; Alps) have been directly dated using texturally controlled Rb-Sr microsampling dating applied to mylonites, and both stepwise-heating and laser-ablation ⁴⁰Ar/³⁹Ar dating applied to pseudotachylytes. The new fault ages place better constraints on tectonic models proposed for the PAF, particularly in its central sector. Along the North Giudicarie fault, Oligocene (E)SE-directed thrusting (29-32 Ma) is currently best explained as accommodation across a cogenetic restraining bend within the Oligocene dextral Tonale-Pustertal fault system. In this case, the limited jump in metamorphic grade observed across the North Giudicarie fault restricts the dextral displacement along the kinematically linked Tonale fault to ~30 km. Dextral displacement between the Tonale and Pustertal faults cannot be transferred via the Peio fault because of both Late Cretaceous fault ages (74-67 Ma) and sinistral transtensive fault kinematics. In combination with other pseudotachylyte ages (62-58 Ma), widespread Late Cretaceous-Paleocene extension is established within the Austroalpine unit, coeval with sedimentation of Gosau Group sediments. Early Miocene pseudotachylyte ages (22-16 Ma) from the Tonale, Pustertal, Jaufen and Passeier faults argue for a period of enhanced fault activity contemporaneous with lateral extrusion of the Eastern Alps. This event coincides with exhumation of the Penninic units and contemporaneous sedimentation within fault-bound basins.     

Tectonic and sedimentary evolution of the Lower Pliocene Periadriatic foredeep in Central Italy

The Periadriatic foredeep (Italy) was generated by Neogene downbending of the Adria Plate under the Apennine Chain. The basin is filled with Plio-Pleistocene siliciclastic turbidites. Its substratum consists of the carbonate succession of the southwestern Adria Plate margin. The influence of the basin’s morphology on sedimentation and subsequent tectonic evolution is investigated in the Abruzzo sector of the foredeep (Cellino Basin). The substratum is composed of Messinian evaporites that dip towards the Apennines (W). A NNW component along the depocentral axis is divided into four blocks with different depths. The substratum was also affected by a Messinian extensional fault system, not involving the overlying Pliocene sequence. This morphology controlled the distribution of the turbidites in the lower part of the Cellino Basin. The Plio-Pleistocene compressional deformation of the foredeep produced an inner complex structure (Internal Structure), involving the foredeep substratum and an outer imbricate thrust system (Coastal Structure), detached over the faulted Messinian evaporites. This thrust system is parallel to the extensional faults, suggesting a strong influence of the substratum morphology on the development of the compressional structures. The overall structural setting was validated with a balanced cross-section. Out-of-sequence thrusting and non-coeval deformation within each thrust sheet characterize the local tectonic history.     

Dating emplacement and evolution of the orogenic magmatism in the internal Western Alps: 1. The Miagliano Pluton

The Canavese Line in the Western Alps represents the position in the Alpine chain, where alkaline and calc-alkaline magmatism occur in close spatial and temporal association. In addition to available data on the alkaline Valle del Cervo Pluton, we present petrological and geochemical data on the Miagliano tonalite. The latter is of special interest, because it is located in the south-eastern side of the Canavese Line, in contrast to most Periadriatic Plutons. The dioritic to tonalitic rocks of the Miagliano Pluton represent an intermediate stage of a calc-alkaline differentiation, demonstrated by relics of two different pyroxenes as well as the texture of allanite. Hornblende barometry indicates pressures of ~0.46?GPa consistent with the presence of magmatic epidote. Field relationships between the two Plutons, the volcanic and volcaniclastic rocks of the Biella Volcanic Suite and numerous dykes cross-cutting the different units, allow reconstruction of a more refined chronology of the calc-alkaline and alkaline magmatic series. High precision zircon geochronology yields an age of 33.00?±?0.04?Ma for the central tonalitic part of the Miagliano Pluton and 30.39?±?0.50?Ma for the granitic core of the Valle del Cervo Pluton. The difference in age combined with cooling data and intrusion depth indicates dissimilar tectonic transport east and west of the Canavese Line. The earlier emplaced Miagliano Pluton has to be exhumed from an intrusion depth of ~12?C15?km, whereas the neighbouring and younger Valle del Cervo Pluton is exhumed from a depth of 5?C7?km. This tectonic scenario is related to upper crustal rigid block rotation responsible for the burial of the lowermost Rupelian paleosurface of the Sesia?CLanzo Zone. Thus, the new ages constrain the paroxysm of the orogenic magmatism in the internal Western Alps to an extremely short lapse of time in the first half of the Rupelian.     

Dating emplacement and evolution of the orogenic magmatism in the internal Western Alps: 2. The Biella Volcanic Suite

The high-pressure metamorphic rocks of the Sesia?CLanzo zone are partly covered by a volcano-sedimentary unit, the Biella Volcanic Suite. Calc-alkaline and shoshonitic lavas extruded sub-aerially on the Oligocene surface. Uranium?CLead zircon dating yields 32.44?C32.89?Ma for the eruption of the calc-alkaline lavas and therefore fixes a minimum age for the paleosurface. The Biella Volcanic Suite consists mainly of epiclastic rocks deposited in a high-energy fluvial environment and minor lava flows. The rocks of the suite display widespread post-eruption transformations. Illite and chlorite thermometry as well as fission track dating suggest a thermal overprint related to burial of the Biella Volcanic Suite. An upper crustal rigid block tilting in the area causes this burial. Hydrothermal tourmaline and ankerite veins related to the intrusion of the nearby Valle del Cervo Pluton crosscut the already tilted Biella Volcanic Suite. The intrusion age of Valle del Cervo Pluton at 30.39?±?0.50?Ma sets therefore the lower time limit for tectonic processes responsible for the tilting and burial. After the burial, the Biella Volcanic Suite remained for around 20?million years between the zircon and the apatite partial annealing zone. The apatite fission track ages spread between 16 and 20?Ma gives the time frame for the second exhumation of these units. The Biella Volcanic Suite and the adjacent rocks of the Sesia?CLanzo zone were the second time exhumed to the surface in Messinian times, after a long residence time within the apatite partial annealing zone.     

Evolutionary cycles during the Andean orogeny: repeated slab breakoff and flat subduction?

Tectonomagmatic similarities between the modern Chilean flat-slab region and pre-Neogene magmatic episodes suggest that they represent analogues to flat subduction. Evolutionary patterns in each magmatic suite include (i) increasing La/Yb ratios and Sr-and Nd-isotopic enrichment through time, (ii) eastward-migration of magmatism after periods of transpressional/transtensional intra-arc deformation, and (iii) subsequent termination and virtual absence of main-arc activity for 5–10 Myr. These patterns may reflect slab shallowing followed by flat subduction and thickening of the overlying crust. If repeated, they require interchanging episodes of slab steepening. Increasing convergence rates force slab kinking and eventual failure of the oversteepened slab, followed by rebound of the slab tip (owing to lack of further slab pull), flat subduction and termination of subduction-related magmatism. Rapid subduction leads to shallow overriding of the detached slab fragment. Eclogitization of the gradually steepening slab tip at depth and subsequent slab pull permits asthenospheric corner flow and subduction-related magmatism.     

Extensional neotectonics around the bend of the Western/Central Alps: an overview

The Western Alps’ active tectonics is characterized by ongoing widespread extension in the highest parts of the belt and transpressive/compressive tectonics along its borders. We examine these contrasting tectonic regimes using a multidisciplinary approach including seismotectonics, numerical modeling, GPS, morphotectonics, fieldwork, and brittle deformation analysis. Extension appears to be the dominant process in the present-day tectonic activity in the Western Alps, affecting its internal areas all along the arc. Shortening, in contrast, is limited to small areas located along at the outer borders of the chain. Strike-slip is observed throughout the Alpine realm and in the foreland. The stress-orientation pattern is radial for σ3 in the inner, extensional zones, and for σ1 in the outer, transcurrent/tranpressional ones. Extensional areas can be correlated with the parts of the belt with the thickest crust. Quantification of seismic strain in tectonically homogeneous areas shows that only 10–20% of the geodesy-documented deformation can be explained by the Alpine seismicity. We propose that, Alpine active tectonics are ruled by isostasy/buoyancy forces rather than the ongoing shortening along the Alpine Europe/Adria collision zone. This interpretation is corroborated by numerical modeling. The Neogene extensional structures in the Alps formed under increasingly brittle conditions. A synthesis of paleostress tensors for the internal parts of the West-Alpine Arc documents major orogen-parallel extension with a continuous change in σ3 directions from ENE–WSW in the Simplon area, to N–S in the Vanoise area and to NNW–SSE in the Briançon area. Minor orogen-perpendicular extension increases from N to S. This second signal correlates with the present-day geodynamics as revealed by focal-plane mechanisms analysis. The orogen-parallel extension could be related to the opening of the Ligurian Sea during the Early-Middle Miocene and to compression/rotation of the Adriatic indenter inducing lateral extrusion.     

Complex slab structure and arc magmatism beneath the Japanese Islands

A dense nationwide seismic network recently constructed in Japan has resulted in the production of a large amount of high-quality data that have enabled the high-resolution imaging of deep seismic structures in the Japanese subduction zone. Seismic tomography, precise locations of earthquakes, and focal mechanism research have allowed the identification of the complex structure of subducting slabs beneath Japan, revealing that the subducting Philippine Sea slab underneath southwestern Japan has an undulatory configuration down to a depth of 60–200 km, and is continuous from Kanto to Kyushu without disruption or splitting, even within areas north of the Izu Peninsula. Analysis of the geometry of the Pacific and Philippine Sea slabs identified a broad contact zone beneath the Kanto Plain that causes anomalously deep interplate and intraslab earthquake activity. Seismic tomographic inversions using both teleseismic and local events provide a clear image of the deep aseismic portion of the Philippine Sea slab beneath the Japan Sea north of Chugoku and Kyushu, and beneath the East China Sea west of Kyushu down to a depth of ∼450 km. Seismic tomography also allowed the identification of an inclined sheet-like seismic low-velocity zone in the mantle wedge beneath Tohoku. A recent seismic tomography work further revealed clear images of similar inclined low-velocity zones in the mantle wedge for almost all other areas of Japan. The presence of the inclined low-velocity zones in the mantle wedge across the entirety of Japan suggests that it is a common feature to all subduction zones. These low-velocity zones may correspond to the upwelling flow portion of subduction-induced convection systems. These upwelling flows reach the Moho directly beneath active volcanic areas, suggesting a link between volcanism and upwelling.     

Syn-convergence exhumation of the Central Alps

Abstract

The exhumation of rocks in a plate convergence setting is commonly related to erosion and/or tectonic denudation accompanied by isostatic adjustment. Isostatic compensation is the physical response to denudation. It leads to unroofing of deep levels of the crust. A new model for producing topographic relief is proposed which explains well the rapid exhumation of high-temperature rocks in the Central Alps via erosion and tectonic denudation (i.e. gravitational collapse and normal faulting). It is shown that the forward motion of the cold and rigid Adriatic indenter into the European crust is twofold. Firstly, horizontal compression led to the vertical extrusion of the deepest ductile European basement into shallower levels. This tectonic process induced heat transfer through the southern steep belt as well as heat advection together with the extruded material, resulting in the metamorphic aureole observed in the Central Alps. Secondly, the lower part of the Adriatic crust protruded into the warm European crust as a result of continuous forward motion. Geophysical data suggest that the isostatic response to indentation (i.e. deepening of the alpine root) has been inhibited by the mechanical strength of the cold and rigid Adriatic crust. Then, the indentation process induced a deviation from isostatic equilibrium by creating a tremendous topographic relief. This relief disappeared rapidly, possibly as fast as it forms, by enhanced erosion and tectonic denudation leading to rapid exhumation of the metamorphic dome.     

Metamorphic field gradients in the Central Alps

Metamorphic field gradients were determined across the entire amphibolite grade Central Alps ( c . 50×100 km). P – T  were calculated from 116 samples acquired from our own field work, from samples provided to us by others, and from rocks with mineral compositions described in the literature. Only fluid-conserved equilibria were used to determine P – T  . The use of an internally consistent thermodynamic database and mineral solid solution models makes the results robust and reduces relative errors. The results are presented in contour maps. Temperature increases from 500 to 550 °C along the limit of amphibolite grade metamorphism in the north and west, to c . 675 °C toward the south at the Insubric line near the town of Bellinzona. Maximum recorded pressures of c . 7 kbar are in a central region c . 20 km north of the Insubric line, and decrease both to the north (5.5 kbar) and south (4.5 kbar). The P–T  results indicate that there is a relatively large area that reached conditions in the sillimanite stability field but developed neither sillimanite nor fibrolite; this is interpreted as a result of kinetic constraints on nucleation and growth because of the small amounts of thermal overstep (<40 °C) of the kyanite-sillimanite phase boundary. Comparison of P–T  conditions with carbonate isograds in the region indicate that fluids present during metamorphism were not dominated by a homogeneous external source. Examination of the two-dimensional distribution of pressure and temperature in the context of thermal and tectonic models indicates that two thermal pulses affected the Central Alps during the Tertiary. In the second, heat affected only the southern parts of the area and overprinted the previously established P–T  gradients.     

Post-collisional tectonics in the Northern Cottian Alps (Italian Western Alps)

Field mapping and structural analysis have allowed us to characterise the fault geometry and the post-metamorphic tectonics of an area located in the Northern Cottian Alps (inner Western Alps). Two main faulting stages were distinguished here. The first (Oligocene?-Early Miocene) is related to the development of an E–W-striking left-normal shear zone. This shear zone is interpreted as an antithetical of two regional, N–S right-lateral structures: the Col del Lis-Trana Deformation Zone (LTZ) and the Colle delle Finestre Deformation Zone (CFZ). The second faulting stage (post-Early Miocene) is related mainly to the development of N–S normal faults, coeval with the extensional reactivation of the LTZ and the CFZ. We discuss this kinematic evolution in the framework of the geodynamic evolution of the Western Alps.     

Exhumed fault-bounded Alpine blocks along the Periadriatic lineament: the Eder unit (Carnic Alps, Austria)

The Eder unit in the Carnic Alps, which is situated immediately south of the Periadriatic lineament (PL), represents a fault-bounded block consisting of a low-grade (up to 400?°C, indicated by epizonal illite “crystallinity” values, recrystallized quartz, and non-recrystallized white mica) metamorphic Paleozoic metasedimentary sequence. Until now, it has been assumed to represent a separate Variscan nappe. The rocks of the Eder unit show a strong E- to W-oriented stretching lineation on steep foliation planes (D₁) subparallel to the PL. D₁ structures originated near the temperature peak of metamorphism, and shear sense indicators show dextral ductile shear parallel to the PL. Tight mesoscale D₂ folds formed on the cooling path. K–Ar and Ar–Ar ages from newly formed white mica cluster around 32–28 and 18–13 Ma and suggest a two-stage Tertiary history of the Eder unit. We interpret the Eder unit as a fault-bounded block formed during Oligocene large-scale dextral shearing along the PL (near T_max) and exhumed in mid-Miocene times during another phase of activity along the PL. Its nature as a separate Variscan nappe is questioned.     

Erosion-driven uplift of the modern Central Alps

We present a compilation of data of modern tectono-geomorphic processes in the Central European Alps which suggest that observed rock uplift is a response to climate-driven denudation. This interpretation is predominantly based on the recent quantification of basin-averaged Late Holocene denudation rates that are so similar to the pattern and rates of rock uplift rates as determined by geodetic leveling. Furthermore, a GPS data-based synthesis of Adriatic microplate kinematics suggests that the Central Alps are currently not in a state of active convergence. Finally, we illustrate that the Central Alps have acted as a closed system for Holocene redistribution of sediment in which the peri-Alpine lakes have operated as a sink for the erosional products of the inner Central Alps.While various hypotheses have been put forward to explain Central Alpine rock uplift (e.g. lithospheric forcing by convergence, mantle processes, or ice melting) we show with an elastic model of lithospheric deformation, that the correlation between erosion and rock uplift rates reflects a positive feedback between denudation and the associated isostatic response to unloading. Thus, erosion does not passively respond to advection of crustal material as might be the case in actively converging orogens. Rather, we suggest that the geomorphic response of the Alpine topography to glacial and fluvial erosion and the resulting disequilibrium for modern channelized and associated hillslope processes explains much of the pattern of modern denudation and hence rock uplift. Therefore, in a non-convergent orogen such as the Central European Alps, the observed vertical rock uplift is primarily a consequence of passive unloading due to erosion.     

Interplay between erosion and tectonics in the Western Alps

Bedrock fission‐track analysis, high‐resolution petrography and heavy mineral analyses of sediments are used to investigate the relationships between erosion and tectonics in the Western Alps. Along the Aosta Valley cross‐section, exhumation rates based on fission‐track data are higher in the fault‐bounded western block than in the eastern block (0.4–1.5 vs. 0.1–0.3 mm yr⁻¹). Erosion rates based on the analysis of bed‐load in the Dora Baltea drainage display the same pattern and have similar magnitudes in the relative sub‐basins (0.4–0.7 vs. 0.04–0.08 mm yr⁻¹). Results highlight that climate, relief and lithology are not the controlling factors of erosion in the Western Alps. The main driving force behind erosion is instead tectonics that causes the differential upward motion of crustal blocks.     

Origin and significance of the Permian high-K calc-alkaline magmatism in the central-eastern Southern Alps, Italy

The Atesina Volcanic District, the Monte Luco volcanics, and the Cima d'Asta, Bressanone-Chiusa, Ivigna, Monte Croce and Monte Sabion intrusions, in the central-eastern Southern Alps, form a wide calc-alkaline association of Permian age (ca. 280–260 Ma). The magmatism originated during a period of post-orogenic extensional/transtensional faulting which controlled the magma ascent and emplacement. The magmatic products are represented by a continuum spectrum of rock types ranging from basaltic andesites to rhyolites, and from gabbros to monzogranites, with preponderance of the acidic terms. They constitute a metaluminous to weakly peraluminous series showing mineralogical, petrographic and chemical characteristics distinctive of the high-K calc-alkaline suites. In the MORB-normalized trace element diagrams, the most primitive volcanic and plutonic rocks (basaltic andesites and gabbros with Mg No.=66 to 70; Ni=25 to 83 ppm; Cr=248 to 679 ppm) show LILE and LREE enriched patterns with troughs at Nb–Ta and Ti, a distinctive feature of subduction-related magmas. Field, petrographic, geochemical and isotopic evidence (initial ⁸⁷Sr/⁸⁶Sr ratios from 0.7057 to 0.7114; ε_Nd values from −2.7 to −7.4; ∂¹⁸O values between 7.6 and 9.5‰) support a hybrid nature for both volcanic and plutonic rocks, originating through complex interactions between mantle-derived magmas and crustal materials. Only the scanty andalusite–cordierite and orthopyroxene–cordierite bearing peraluminous granites in the Cima d'Asta and Bressanone-Chiusa intrusive complexes can be interpreted as purely crustal melts (initial ⁸⁷Sr/⁸⁶Sr=0.7143–0.7167; initial ε_Nd values between −7.9 and −9.6, close to average composition of the granulitic metasedimentary crust from the Ivrea Zone in the western Southern Alps). Although the Permian magmatism shows geochemical characteristics similar to those of arc-related suites, palaeogeographic restorations, and geological and tectonic evidence, seem not to support any spatial and/or temporal connection with subduction processes. The magmatism is post-collisional and post-orogenic, and originated in a regime of lithospheric extension and attenuation affecting the whole domain of the European Hercynian belt. A change in the convergence direction between Gondwana and Laurasia, combined with the effects of gravitational collapse of the Hercynian chain, could have been the driving mechanism for lithosphere extension and thinning, as well as for upwelling of hot asthenosphere that caused thermal perturbation and magma generation. In the above context, the calc-alkaline affinity and the orogenic-like signature of the Permian magmatism might result from extensive contamination of basaltic magmas, likely derived from enriched lithospheric mantle source(s), with felsic crustal melts.     

Contrasting serpentinization processes in the eastern Central Alps

Stable isotope compositions have been determined for serpentinites from between Davos (Arosa-Platta nappe, Switzerland) and the Valmalenco (Italy). D and ¹⁸O values (–120 to –60 and 6–10, respectively) in the Arosa-Platta nappe indicate that serpentinization took place on the continent at relatively low temperatures in the presence of limited amounts of metamorphic fluids that contained a component of meteoric water. One sample of chrysotile has a ¹⁸O value of 13 providing evidence of high W/R ratios and low formation temperature of lizardite-chrysotile in this area. In contrast, relatively high D values (–42 to –34) and low ¹⁸O values (4.4–7.4) for serpentine in the eastern part of the Valmalenco suggest a serpentinization process that took place at moderate temperatures in fluids that were dominated by ocean water. The antigorite in the Valmalenco is the first reported example of continental antigorite with an ocean water signature. An amphibole sample from a metasomatically overprinted contact zone to metasediments (D=-36) indicates that the metasomatic event also took place in the presence of ocean water. Lower D values (–93 to –60) of serpentines in the western part of the Valmalenco suggest a different alteration history possibly influenced by fluids associated with contact metamorphism. Low water/rock ratios during regional metamorphism (and metasomatism) have to be assumed for both regions.     

Zeolites in fissures of granites and gneisses of the Central Alps

Six different Ca‐zeolite minerals are widespread in various assemblages in late fissures and fractures in granites and gneisses of the Swiss Alps. The zeolites formed as a result of water–rock interaction at relatively low temperatures (<250 °C) in the continental upper crust. The zeolites typically overgrow earlier minerals of the fissure assemblages, but zeolites also occur as monomineralic fissure fillings. They represent the youngest fissure minerals formed during uplift and exhumation of the Alpine orogen. A systematic study of zeolite samples showed that the majority of finds originate from three regions particularity rich in zeolite‐bearing fissures: (i) in the central and eastern part of the Aar‐ and Gotthard Massifs; (2) Gibelsbach/Fiesch, in a fissure breccia located at the boundary of Aar Massif and Permian sedimentary rocks; and (3) in Penninic gneisses of the Simano nappe at Arvigo (Val Calanca). Rail and road tunnel construction across the Aar‐ and Gotthard Massif provided excellent data on zeolite frequency in Alpine fissures. It was found that 32% (Gotthard NEAT rail base tunnel, Amsteg section) and 18% (Gotthard road tunnel) of all studied fissures are filled with zeolites. The number of different zeolites is limited to six species: laumontite, stilbite and scolecite are abundant and common, whereas heulandite, chabazite and epistilbite occur occasionally. Calcium is the dominant extra‐framework cation, with minor K and Na. Heulandite and chabazite contain Sr up to 29 and 10 mol.% extra‐framework cations respectively. Na and K contents in zeolites tend to increase during growth as a result of changes in fluid composition and/or temperature. The K enrichment of stilbite found in surface outcrops compared to subsurface samples may indicate late stage cation exchange with surface water. Texture data, relative age sequences derived from fissure assemblages and equilibrium calculations show that the Ca‐dominated zeolites precipitated from fluid with decreasing temperature in the order (old to young = hot to cold): scolecite, laumontite, heulandite, chabazite and stilbite. The necessary components for zeolite formation are derived from dissolving primary granite and gneiss minerals. The nature of these minerals depends, among other factors, on the metamorphic history of the host rock. Zeolites in the Aar Massif derived from the dissolution of epidote, secondary calcite and albite that were originally formed during Alpine greenschist metamorphism from primary granite and gneiss assemblages. Zeolite fissures occur in areas of H₂O‐dominated fluids. This is consistent with equilibrium calculations that predict a low CO₂ tolerance of zeolite assemblages, particularly at low temperature.