Impact histories of angrites,eucrites, and their parent bodies

Abstract– Eucrites, which are probably from 4 Vesta, and angrites are the two largest groups of basaltic meteorites from the asteroid belt. The parent body of the angrites is not known but it may have been comparable in size to Vesta as it retained basalts and had a core dynamo. Both bodies were melted early by ²⁶Al and formed basalts a few Myr after they accreted. Despite these similarities, the impact histories of the angrites and eucrites are very different: angrites are very largely unshocked and none are breccias, whereas most eucrites are breccias and many are shocked. We attribute the lack of shocked and unbrecciated angrites to an impact, possibly at 4558 Myr ago—the radiometric age of the younger angrites—that extracted the angrites from their original parent body into smaller bodies. These bodies, which may have had a diameter of approximately 10 km, suffered much less impact damage than Vesta during the late heavy bombardment because small bodies retain shocked rocks less efficiently than large ones and because large bodies suffer near‐catastrophic impacts that deposit vastly more impact energy per kg of target. Our proposed history for the angrites is comparable to that proposed by Bogard and Garrison (2003) for the unbrecciated eucrites with Ar‐Ar ages of 4.48 Gyr and that for unbrecciated eucrites with anomalous oxygen isotopic compositions that did not come from Vesta. We infer that the original parent bodies of the angrites and the anomalous eucrites were lost from the belt when the giant planets migrated and the total mass of asteroids was severely depleted. Alternatively, their parent bodies may have formed in the terrestrial planet region and fragments of these bodies were scattered out to the primordial Main Belt as a consequence of terrestrial planet formation.     

The parent magmas of the cumulate eucrites: A mass balance approach

Abstract— The cumulate eucrite meteorites are gabbros that are related to the eucrite basalt meteorites. The eucrite basalts are relatively primitive (nearly flat REE patterns with La ～ 8–30 × CI), but the parent magmas of the cumulate eucrites have been inferred as extremely evolved (La to > 100 × CI). This inference has been based on mineral/magma partitioning, and on mass balance considering the cumulate eucrites as adcumulates of plagioclase + pigeonite only; both approaches have been criticized as inappropriate. Here, mass balance including magma + equilibrium pigeonite + equilibrium plagioclase is used to test a simple model for the cumulate eucrites: that they formed from known eucritic magma types, that they consisted only of magma + crystals in chemical equilibrium with the magma, and that they were closed to chemical exchange after the accumulation of crystals. This model is tested for major and rare earth elements (REE). The cumulate eucrites Serra de Magé and Moore County are consistent, in both REE and major elements, with formation by this simple model from a eucrite magma with a composition similar to the Nuevo Laredo meteorite: Serra de Magé as 14% magma, 47.5% pigeonite, and 38.5% plagioclase; Moore County as 35% magma, 37.5% pigeonite, and 27.5% plagioclase. These results are insensitive to the choice of mineral/magma partition coefficients. Results for the Moama cumulate eucrite are strongly dependent on choice of partition coefficients; for one reasonable choice, Moama's composition can be modeled as 4% Nuevo Laredo magma, 60% pigeonite, and 36% plagioclase. Selection of parent magma composition relies heavily on major elements; the REE cannot uniquely indicate a parent magma among the eucrite basalts. The major element composition of Y-791195 can be fit adequately as a simple cumulate from any basaltic eucrite composition. However, Y-791195 has LREE abundances and La/Lu too low to be accommodated within the model using any basaltic eucrite composition and any reasonable partition coefficients. Postcumulus loss of incompatible elements seems possible. It is intriguing that Serra de Magé, Moore County, and Moama are consistent with the same parental magma; could they be from the same igneous body on the eucrite parent asteroid (4 Vesta)?     

Microstructures of metal grains in ordinary chondrites: Implications for their thermal histories

Abstract— This paper reports one of the first attempts to investigate by analytical transmission electron microscopy (ATEM) the microstructures and compositions of Fe‐Ni metal grains in ordinary chondrites. Three ordinary chondrites, Saint Séverin (LL6), Agen (H5), and Tsarev (L6) were selected because they display contrasting microstructures, which reflects different thermal histories. In Saint Séverin, the microstructure of the Ni‐rich metal grains is due to slow cooling. It consists of a two‐phase assemblage with a honeycomb structure resulting from spinodal decomposition similar to the cloudy zone of iron meteorites. Microanalyses show that the Ni‐rich phase is tetrataenite (Ni = 47 wt%) and the Ni‐poor phase, with a composition of ～25% Ni, is either martensite or taenite, these two occurring adjacent to each other. The observation that the Ni‐poor phase is partly fcc resolves the disagreement between previous transmission electron microscopy (TEM) and Mössbauer studies on iron meteorites and ordinary chondrite metal. The Ni content of the honeycomb phase is much higher than in mesosiderites, confirming that mesosiderites cooled much more slowly. The high‐Ni tetrataenite rim in contact with the cloudy zone displays high‐Ni compositional variability on a very fine scale, which suggests that the corresponding area was destabilized and partially decomposed at low temperature. Both Agen and Tsarev display evidence of reheating and subsequent fast cooling obviously related to shock events. Their metallic particles mostly consist of martensite, the microstructure of which depends on local Ni content. Microstructures are controlled by both the temperature at which martensite forms and that at which it possibly decomposes. In high‐Ni zones (>15 wt%), martensitic transformation started at low temperature (<300 °C). Because no further recovery occurred, these zones contain a high density of lattice defects. In low‐Ni zones (<15 wt%), martensite grains formed at higher temperature and their lattice defects recovered. These martensite grains present a lath texture with numerous tiny precipitates of Ni‐rich taenite (Ni = 50 wt%) at lath boundaries. Nickel composition profiles across precipitate‐matrix interfaces show that the growth of these precipitates was controlled by preferential diffusion of Ni along lattice defects. The cooling rates deduced from Ni concentration profiles and precipitate sizes are within the range 1–10 °C/year for Tsarev and 10–100 °C/year for Agen.     

Nonporphyritic chondrules and chondrule fragments in enstatite chondrites: Insights into their origin and secondary processing

Sixteen nonporphyritic chondrules and chondrule fragments were studied in polished thin and thick sections in two enstatite chondrites (ECs): twelve objects from unequilibrated EH3 Sahara 97158 and four objects from equilibrated EH4 Indarch. Bulk major element analyses, obtained with electron microprobe analysis (EMPA) and analytical scanning electron microscopy (ASEM), as well as bulk lithophile trace element analyses, determined by laser ablation inductively coupled plasma–mass spectrometry (LA‐ICP‐MS), show that volatile components (K₂O + Na₂O versus Al₂O₃) scatter roughly around the CI line, indicating equilibration with the chondritic reservoir. All lithophile trace element abundances in the chondrules from Sahara 97158 and Indarch are within the range of previous analyses of nonporphyritic chondrules in unequilibrated ordinary chondrites (UOCs). The unfractionated (solar‐like) Yb/Ce ratio of the studied objects and the mostly unfractionated refractory lithophile trace element (RLTE) abundance patterns indicate an origin by direct condensation. However, the objects possess subchondritic CaO/Al₂O₃ ratios; superchondritic (Sahara 97158) and subchondritic (Indarch) Yb/Sc ratios; and chondritic‐normalized deficits in Nb, Ti, V, and Mn relative to RLTEs. This suggests a unique nebular process for the origin of these ECs, involving elemental fractionation of the solar gas by the removal of oldhamite, niningerite, and/or another phase prior to chondrule condensation. A layered chondrule in Sahara 97158 is strongly depleted in Nb in the core compared to the rim, suggesting that the solar gas was heterogeneous on the time scales of chondrule formation. Late stage metasomatic events produced the compositional diversity of the studied objects by addition of moderately volatile and volatile elements. In the equilibrated Indarch chondrules, this late process has been further disturbed, possibly by a postaccretional process (diffusion?) that preferentially mobilized Rb with respect to Cs in the studied objects.     

The Fountain Hills unique CB chondrite: Insights into thermal processes on the CB parent body

Abstract— We report the results of an extensive study of the Fountain Hills chondritic meteorite. This meteorite is closely related to the CB_a class. Mineral compositions and O‐isotopic ratios are indistinguishable from other members of this group. However, many features of Fountain Hills are distinct from the other CB chondrites. Fountain Hills contains 23 volume percent metal, significantly lower than other members of this class. In addition, Fountain Hills contains porphyritic chondrules, which are extremely rare in other CB_a chondrites. Fountain Hills does not appear to have experienced the extensive shock seen in other CB chondrites. The chondrule textures and lack of fine‐grained matrix suggests that Fountain Hills formed in a dust‐poor region of the early solar system by melting of solid precursors. Refractory siderophiles and lithophile elements are present in near‐CI abundances (within a factor of two, related to the enhancement of metal). Moderately volatile and highly volatile elements are significantly depleted in Fountain Hills. The abundances of refractory siderophile trace elements in metal grains are consistent with condensation from a gas that is reduced relative to solar composition and at relatively high pressures (10^?3bars). Fountain Hills experienced significant thermal metamorphism on its parent asteroid. Combining results from the chemical gradients in an isolated spinel grain with olivine‐spinel geothermometry suggests a peak temperature of metamorphism between 535 °C and 878 °C, similar to type‐4 ordinary chondrites.     

Ganymedean pedestal craters distribution: Implications on thermal and tectonic histories

The distribution analysis of the ganymedean pedestal craters shows a very good correlation between them and the grooved terrains. These craters seem to be the earliest post-grooved impacts. The presence of tectonized pedestal craters is also noted. This type of crater is the only one lying on the grooved terrains and being affected by the grooves. Assuming that a lowering of the terrain's viscosity is the determining factor for the presence of pedestal craters, we conclude that at the time of their formation, the grooved terrains have a lower viscosity than the other terrains. Moreover, using the density ratio between non-pedestal craters and pedestal craters, a relative low viscosity state's duration time is calculated. Based on the density ratio between pedestal craters and tectonized pedestal craters, a grooved terrains formation's time is also calculated. These two times are of the order of 10⁷ yr and 10⁶ yr respectively. This period of low viscosity may be partly due to internal heating.     

Askival: An altered feldspathic cumulate sample in Gale crater

Askival is a light-toned, coarsely crystalline float rock, which was identified near the base of Vera Rubin Ridge in Gale crater. We have studied Askival, principally with the ChemCam instrument but also using APXS compositional data and MAHLI images. Askival and an earlier identified sample, Bindi, represent two rare examples of feldspathic cumulate float rocks in Gale crater with >65% relict plagioclase. Bindi appears unaltered whereas Askival shows textural and compositional signatures of silicification, along with alkali remobilization and hydration. Askival likely experienced multiple stages of alteration, occurring first through acidic hydrolysis of metal cations, followed by deposition of silica and possible phyllosilicates at low T and neutral-alkaline pH. Through laser-induced breakdown spectroscopy compositional analyses and normative calculations, we suggest that an assemblage of Fe-Mg silicates including amphibole and pyroxene, Fe phases, and possibly Mg-rich phyllosilicate are present. Thermodynamic modeling of the more pristine Bindi composition predicts that amphibole and feldspar are stable within an upper crustal setting. This is consistent with the presence of amphibole in the parent igneous rocks of Askival and suggests that the paucity of amphiboles in other known Martian samples reflects the lack of representative samples of the Martian crust rather than their absence on Mars.     

The volatile content of Vesta: Clues from apatite in eucrites

Apatite was analyzed by electron microprobe in 3 cumulate and 10 basaltic eucrites. Eucritic apatite is fluorine‐rich with minor chlorine and hydroxyl (calculated by difference). We confirmed the hydroxyl content by measuring hydroxyl directly in apatites from three representative eucrites using secondary ionization mass spectroscopy. Overall, most eucritic apatites resemble fluorine‐rich lunar mare apatites, but intriguing OH‐ and Cl‐rich apatites suggest a role for water and/or hydrothermal fluids in the Vestan interior or on other related differentiated asteroids. Most late‐stage apatite found in mesostasis has little hydroxyl or chlorine and is thought to have crystallized from a degassed magma; however, several apatites exhibit atypical compositions and/or textural characteristics. For example, the isotopically anomalous basaltic eucrite Pasamonte has apatite in the mesostasis with significant OH. Apatites in Juvinas also have significant OH and occur as veinlets crosscutting silicates. Euhedral apatites in the Moore County cumulate eucrite occur as inclusions in pyroxene and are also hydroxyl‐rich (0.62 wt% OH). The OH was confirmed by SIMS analysis and this apatite clearly points to the presence of water, at least locally, in the Vestan interior. Portions of Elephant Moraine (EET) 90020 have large and abundant apatites, which may be the product of apatite accumulation in a zone of melt‐rock reaction. Relatively chlorine‐rich apatites occur in basaltic eucrite Graves Nunataks (GRA) 98098 (approximately 1 wt% Cl). Particularly striking is the compositional similarity between apatite in GRA 98098 and apatites in lunar KREEP, which may indicate the presence of residual magmas from an asteroid‐wide magma ocean on Vesta.     

The differentiation of eucrites: The role of in situ crystallization

Abstract— We report on major and trace element analyses of 17 eucrites, including three cumulate eucrites (Binda, Moore County, and Serra de Magé), determined by, respectively, inductively‐coupled plasma atomic emission spectrometry and inductively‐coupled plasma mass spectrometry. The results obtained for Binda and Moore County are consistent with the model of Treiman (1997) for the formation of cumulate eucrites, which holds that these meteorites were produced from a eucritic melt. Our sample of Serra de Magé contains unusually large amounts of pyroxene and probably an accessory phase rich in heavy rare earth elements and is therefore not representative of this eucrite as known from literature data. Our results for the noncumulate eucrites Bereba, Bouvante, Cachari, Caldera, Camel Donga, Ibitira, Jonzac, Juvinas, Lakangaon, Millbillillie, Padvarninkai, Pasamonte, Sioux County, and Stannern are in good agreement with literature data. The observed decoupling between major and trace elements for noncumulate eucrites can be explained by in situ crystallization during the differentiation of an asteroidal magma ocean. This model can further account for both the Nuevo Laredo and the Stannern trends but has as a consequence that none of the analyzed eucrites represents a primary melt.     

Geology of large impact craters on Ganymede: Implications on thermal and tectonic histories

The geometry of the furrows of Galileo Regio indicates that they are not of impact origin, and irrelevant to discussion about large impact effects. The detailed study of three large impact basins indicates that their transient cavity radii are different from previously reported values. Because of the relations between crater's size and lithospheric thickness, these new values of basins radii would constrain further models of Ganymede's thermal evolution. The geometry of lineaments around these three basins, which occurred on grooved terrains, indicates that these impacts induced tectonic motions along a preexisting planetary wide grid pattern. This pattern influenced also the formation of the furrows on Galileo Regio. That would indicate that the grooved terrains are only superficial layers and that they were formed without destruction or rotation of their basement.     

Deformation and thermal histories of chondrules in the Chainpur (LL3.4) chondrite

Abstract— Transmission-electron-microscopy (TEM) and optical data suggest that chondrules in the Chainpur (LL3.4) chondrite experienced varied thermal and deformation histories prior to the final agglomeration of the meteorite. Chainpur may be regarded as an agglomerate or breccia that experienced little deformation or heating during and after the final accumulation and compaction of its constituents. One chondrule in Chainpur was impact-shocked to high pressures (～ 20–50 GPa), almost certainly prior to final agglomeration, either while it was an independent entity in space or while it was in the regolith of a parent body. However, most (>85%) of the chondrules in Chainpur were evidently not significantly shock-metamorphosed subsequent to their formation. The dearth of shock effects implies that most chondrules in Chainpur did not form by shock melting, although some chondrules may have formed by this process. Dusty-metal-bearing olivine grains, which are widely interpreted to have escaped melting during chondrule formation, contain moderate densities of dislocations (～ 10⁸ cm^?2). The dislocations in these grains were introduced before or during the last episode of melting in at least one chondrule. This observation can be explained if olivine was impact-deformed before or during chondrule formation, or if olivine was strained by reduction or thermally-induced processes during chondrule formation. Low-Ca pyroxene grains in chondrules are often strained. In most cases this strain probably arose as a by-product of polytype transformations (protoenstatite → clinoenstatite/orthoenstatite and clinoenstatite → orthoenstatite) that occurred during the igneous crystallization and static annealing of chondrules. Droplet chondrules with glassy mesostases were minimally annealed, consistent with an origin as relatively rapidly cooled objects in an unconfined, cold environment. Some irregular chondrules and at least one droplet chondrule were thermally metamorphosed prior to final agglomeration, either as a result of moderately slow cooling (～ 100 °C/hr) from melt temperatures (during autometamorphism) or as a result of reheating episodes. Two of the most annealed chondrules contain relatively abundant plagioclase feldspar, and one of these has a uniform olivine composition appropriate to that of an LL4 chondrite.     

Fe‐Ni metal and sulfide minerals in CM chondrites: An indicator for thermal history

Abstract– CM chondrites were subjected to aqueous alteration and, in some cases, to secondary metamorphic heating. The effects of these processes vary widely, and have mainly been documented in silicate phases. Herein, we report the characteristic features of Fe‐Ni metal and sulfide phases in 13 CM and 2 CM‐related chondrites to explore the thermal history of these chondrites. The texture and compositional distribution of the metal in CM are different from those in unequilibrated ordinary and CO chondrites, but most have similarities to those in highly primitive chondrites, such as CH, CR, and Acfer 094. We classified the CM samples into three categories based on metal composition and sulfide texture. Fe‐Ni metal in category A is kamacite to martensite. Category B is characterized by pyrrhotite grains always containing blebs or lamellae of pentlandite. Opaque mineral assemblages of category C are typically kamacite, Ni‐Co‐rich metal, and pyrrhotite. These categories are closely related to the degree of secondary heating and are not related to degree of the aqueous alteration. The characteristic features of the opaque minerals can be explained by secondary heating processes after aqueous alteration. Category A CM chondrites are unheated, whereas those in category B experienced small degrees of secondary heating. CMs in category C were subjected to the most severe secondary heating process. Thus, opaque minerals can provide constraints on the thermal history for CM chondrites.     

Primary iron sulfides in CM and CR carbonaceous chondrites: Insights into nebular processes

We have carried out a systematic study involving SEM, EPMA, and TEM analyses to determine the textures and compositions of sulfides and sulfide–metal assemblages in a suite of minimally to weakly altered CM and CR carbonaceous chondrites. We have attempted to constrain the distribution and origin of primary sulfides that formed in the solar nebula, rather than by secondary asteroidal alteration processes. Our study focused primarily on sulfide assemblages associated with chondrules, but also examined some occurrences of sulfides within the matrices of these meteorites. Although sulfides are a minor phase in carbonaceous chondrites, we have determined that primary sulfide grains are actually a major proportion of the sulfide grains in weakly altered CM chondrites and have survived aqueous alteration relatively unscathed. In minimally altered CR chondrites, we have determined that essentially all of the sulfides are of primary origin, confirming the observations of Schrader et al. ( 2015 ). The pyrrhotite–pentlandite intergrowth (PPI) grains formed from crystallization of monosulfide solid solution (mss) melts, while sulfide-rimmed metal (SRM) grains formed from sulfidization of Fe,Ni metal. Micron-sized metal inclusions in some PPI grains may have formed by co-crystallization of metal and sulfide from a sulfide melt that experienced S volatilization during the chondrule formation event, or alternatively, may be a remnant of sulfidization of Fe,Ni metal that also occurred during chondrule formation. Sulfur fugacity for SRM grains ranged from −18 to −10 (log units) largely in agreement with predicted solar nebular values. Our observations show that understanding the formation mechanisms of primary sulfide grains provides clues to solar nebular conditions, such as the sulfur fugacity during chondrule formation.     

Thermal histories of angrite meteorites: Trace element partitioning among silicate minerals in Angra dos Reis,Lewis Cliff 86010, and experimental analogs

Abstract— We measured rare earth element (REE) abundances in selected silicate phases in the angrites Angra dos Reis (AdoR) and Lewis Cliff (LEW) 86010 in order to further clarify the thermal history of AdoR. We also carried out a preliminary experimental study designed to examine apparent REE partitioning between silicates (fassaite, olivine, kirschsteinite, and melt) in synthetic analogs of angrites under disequilibrium conditions at liquidus temperatures. Silicates in AdoR are homogeneous with respect to major, minor, and trace elements, which is consistent with the interpretation that AdoR underwent extensive subsolidus equilibration. REE distributions in olivine and kirschsteinite in AdoR are similar to those in LEW 86010 and are consistent with the formation of kirschsteinite by exsolution from olivine during cooling and/or annealing. There is no evidence for a disequilibrium trace element signature that could have been inherited from rapid cooling at liquidus temperatures. This is supported by our petrographic observations of the occurrence of kirschsteinite within olivine aggregates in AdoR. Olivine/kirschsteinite pairs in AdoR record closure temperatures around 600–650 °C.     

Sodic plagioclase thermometry of type 6 ordinary chondrites: Implications for the thermal histories of parent bodies

Abstract— The structural states of sodic plagioclase crystals of ～50 μm in size from three H6, two L6, and one LL6 chondritic meteorites have been determined by measuring the Δ131 parameter with a Gandolfi camera after analyzing chemical compositions. The temperature for each sodic plagioclase crystal has been determined by plotting the Δ131 parameter, corrected for the influence of K, on the relation diagram between the Δ131 parameter and the temperature of synthesis of sodic plagioclase by Smith (1972). The temperature obtained is assigned to the crystallization temperature of sodic plagioclase, and the maximum plagioclase temperature for each meteorite can be assumed to correspond to the maximum temperature attained by each meteorite during metamorphism. The maximum metamorphic temperatures estimated are 725–742 °C for the H6 chondrites, 808–820 °C for the L6 chondrites, and 800 °C for the LL6 chondrite. These temperatures are lower than those based on Ca contents of clinopyroxenes (Dodd, 1981; McSween et al., 1988) but are consistent with those based on Ca contents of orthopyroxenes (McSween and Patchen, 1989; Langenhorst et al., 1995; Jones, 1997). The K content of sodic plagioclase correlates with the temperature obtained from the structural state. This positive correlation suggests that sodic plagioclase has formed in the course of equilibration processes of alkali elements in prograde metamorphism (i.e., during heating processes). The results of this study (i.e., the maximum metamorphic temperature of the H6 chondrites is lower than that of the L6 chondrites by ～80 °C, and meteorites of the same chemical group show very similar maximum metamorphic temperatures) are in accordance with the predictions of calculations based on the ²⁶Al heat source and the onion-shell structure model of the parent bodies.     

Magma ocean fractional crystallization and cumulate overturn in terrestrial planets: Implications for Mars

Abstract— Crystallization of a magma ocean on a large terrestrial planet that is significantly melted by the energy of accretion may lead to an unstable cumulate density stratification, which may overturn to a stable configuration. Overturn of the initially unstable stratification may produce an early basaltic crust and differentiated mantle reservoirs. Such a stable compositional stratification can have important implications for the planet's subsequent evolution by delaying or suppressing thermal convection and by influencing the distribution of radiogenic heat sources. We use simple models for fractional crystallization of a martian magma ocean, and calculate the densities of the resulting cumulates. While the simple models presented do not include all relevant physical processes, they are able to describe to first order a number of aspects of martian evolution. The models describe the creation of magma source regions that differentiated early in the history of Mars, and present the possibility of an early, brief magnetic field initiated by cold overturned cumulates falling to the coremantle boundary. In a model that includes the density inversion at about 7.5 GPa, where olivine and pyroxene float in the remaining magma ocean liquids while garnet sinks, cumulate overturn sequesters alumina in the deep martian interior. The ages and compositions of source regions are consistent with SNC meteorite data.     

Accretion of the asteroids: Implications for their thermal evolution

Thermal models of asteroids generally assume that they accreted either instantaneously or over an extended interval with a prescribed growth rate. It is conventionally assumed that the onset of accretion of chondrite parent bodies was delayed until a substantial fraction of the initial ²⁶Al had decayed. However, this interval is not consistent with the early melting, and differentiation of parent bodies of iron meteorites. Formation time scales are tested by dynamical simulations of accretion from small primary planetesimals. Gravitational accretion yields rapid runaway growth of large planetary embryos until most smaller bodies are depleted. In a given simulation, all asteroid‐sized bodies have comparable growth times, regardless of size. For plausible parameters, growth times are shorter than the lifetime of ²⁶Al, consistent with thermal models that assume instantaneous accretion. Rapid growth after planetesimal formation is consistent with differentiation of parent bodies of iron meteorites, but not with the assumed delay in formation of chondritic bodies. After the initial growth stage, there is an interval of slower evolution until the belt is stirred and the embryos are dynamically removed. During this interval, a fraction of asteroid‐sized bodies experience large accretional impacts, allowing bodies of the same final size to have very different histories of radius versus time. Accretion from small primary planetesimals leaves some fraction of material in bodies small enough to preserve CAIs while avoiding heating by ²⁶Al. Unheated material can be a significant fraction of the mass that remains after large embryos are removed from the Main Belt.     

Vesta and the HED meteorites: Mid‐infrared modeling of minerals and their abundances

Abstract— We demonstrate that the use of an established spectral deconvolution algorithm with mid‐infrared spectral libraries of mineral separates of varying grain sizes is capable of identifying the known mineral compositions and abundances of a selection of howardite, eucrite, and diogenite (HED) meteorite samples. In addition, we apply the same technique to mid‐infrared spectral emissivity measurements of Vesta that have been obtained from Cornell's Mid‐Infrared Asteroid Spectroscopy (MIDAS) Survey and the Infrared Space Observatory (ISO). Each Vesta measurement was made over a different range of longitudes. Our spectral deconvolution results to the Vesta spectra corroborate that Vesta's surface is howardite or eucrite‐like in composition and heterogeneous across its surface. The spectral fits produced by the linear deconvolution algorithm yields good results for the HED samples of known composition, thus giving us a high degree of confidence that our results for Vesta are valid.     

Insights into the Martian mantle: The age and isotopics of the meteorite fall Tissint

The recent witnessed fall of the meteorite Tissint represents the delivery of a pristine new sample from the surface of Mars. This meteorite provides an unprecedented opportunity to study a variety of aspects about the planet's evolution. Using the Rb–Sr and Sm–Nd isotopic systems, we determined that Tissint, a depleted shergottite, has a crystallization age of 574 ± 20 Ma, an initial ε¹⁴³Nd = +42.2 ± 0.5, and an initial ⁸⁷Sr/⁸⁶Sr = 0.700760 ± 11. These initial Nd and Sr isotopic compositions suggest that Tissint originated from a mantle source on Mars that is distinct from the source reservoirs of the other Martian meteorites. The known crystallization ages, geochemical characteristics, ejection ages, and ejection dynamics of Tissint and other similarly grouped Martian meteorites suggest that they are likely derived from a source crater up to approximately 90 km in diameter with an age of approximately 1 Ma that is located on terrain that is approximately 600 million years old.     

Altered primary iron sulfides in CM2 and CR2 carbonaceous chondrites: Insights into parent body processes

The presence of primary iron sulfides that appear to be aqueously altered in CM and CR carbonaceous chondrites provides the potential to study the effects and, by extension, the conditions of aqueous alteration. In this work, we have used SEM, TEM, and EPMA techniques to characterize primary sulfides that show evidence of secondary alteration. The alteration styles consist of primary pyrrhotite altering to secondary pentlandite (CMs only), magnetite (CMs and CRs), and phyllosilicates (CMs only) in grains that initially formed by crystallization from immiscible sulfide melts in chondrules (pyrrhotite‐pentlandite intergrowth [PPI] grains). Textural, microstructural, and compositional data from altered sulfides in a suite of CM and CR chondrites have been used to constrain the conditions of alteration of these grains and determine their alteration mechanisms. This work shows that the PPI grains exhibit two styles of alteration—one to form porous pyrrhotite‐pentlandite (3P) grains by dissolution of precursor PPI grain pyrrhotite and subsequent secondary pentlandite precipitation (CMs only), and the other to form the altered PPI grains by pseudomorphic replacement of primary pyrrhotite by magnetite (CMs and CRs) or phyllosilicates (CMs only). The range of alteration textures and products is the result of differences in conditions of alteration due to the role of microchemical environments and/or brecciation. Our observations show that primary sulfides are sensitive indicators of aqueous alteration processes in CM and CR chondrites.