Target rocks,impact glasses,and melt rocks from the Lonar impact crater,India: Petrography and geochemistry

Abstract— The Lonar crater, India, is the only well‐preserved simple crater on Earth in continental flood basalts; it is excavated in the Deccan trap basalts of Cretaceous‐Tertiary age. A representative set of target basalts, including the basalt flows excavated by the crater, and a variety of impact breccias and impact glasses, were analyzed for their major and trace element compositions. Impact glasses and breccias were found inside and outside the crater rim in a variety of morphological forms and shapes. Comparable geochemical patterns of immobile elements (e.g., REEs) for glass, melt rock and basalt indicates minimal fractionation between the target rocks and the impactites. We found only little indication of post‐impact hydrothermal alteration in terms of volatile trace element changes. No clear indication of an extraterrestrial component was found in any of our breccias and impact glasses, indicating either a low level of contamination, or a non‐chondritic or otherwise iridium‐poor impactor.     

Bosumtwi impact structure,Ghana: Geochemistry of impactites and target rocks,and search for a meteoritic component

Abstract— Major and trace element data, including platinum group element abundances, of representative impactites and target rocks from the crater rim and environs of the Bosumtwi impact structure, Ghana, have been investigated for the possible presence of a meteoritic component in impact‐related rocks. A comparison of chemical data for Bosumtwi target rocks and impactites with those for Ivory Coast tektites and microtektites supports the interpretation that the Bosumtwi structure and Ivory Coast tektites formed during the same impact event. High siderophile element contents (compared to average upper crustal abundances) were determined for target rocks as well as for impactites. Chondrite‐normalized (and iron meteorite‐normalized) abundances for target rocks and impactites are similar. They do not, however, allow the unambiguous detection of the presence, or identification of the type, of a meteoritic component in the impactites. The indigenous siderophile element contents are high and possibly related to regional gold mineralization, although mineralized samples from the general region show somewhat different platinum‐group element abundance patterns compared to the rocks at Bosumtwi. The present data underline the necessity of extensive target rock analyses at Bosumtwi, and at impact structures in general, before making any conclusions regarding the presence of a meteoritic component in impactites.     

Confirmation of a meteoritic component in impact‐melt rocks of the Chesapeake Bay impact structure,Virginia, USA—Evidence from osmium isotopic and PGE systematics

Abstract— The osmium isotope ratios and platinum‐group element (PGE) concentrations of impact‐melt rocks in the Chesapeake Bay impact structure were determined. The impact‐melt rocks come from the cored part of a lower‐crater section of suevitic crystalline‐clast breccia in an 823 m scientific test hole over the central uplift at Cape Charles, Virginia. The ¹⁸⁷Os/¹⁸⁸Os ratios of impact‐melt rocks range from 0.151 to 0.518. The rhenium and platinum‐group element (PGE) concentrations of these rocks are 30–270x higher than concentrations in basement gneiss, and together with the osmium isotopes indicate a substantial meteoritic component in some impact‐melt rocks. Because the PGE abundances in the impact‐melt rocks are dominated by the target materials, interelemental ratios of the impact‐melt rocks are highly variable and nonchondritic. The chemical nature of the projectile for the Chesapeake Bay impact structure cannot be constrained at this time. Model mixing calculations between chondritic and crustal components suggest that most impact‐melt rocks include a bulk meteoritic component of 0.01–0.1% by mass. Several impact‐melt rocks with lowest initial ¹⁸⁷Os/¹⁸⁸Os ratios and the highest osmium concentrations could have been produced by additions of 0.1%–0.2% of a meteoritic component. In these samples, as much as 70% of the total Os may be of meteoritic origin. At the calculated proportions of a meteoritic component (0.01–0.1% by mass), no mixtures of the investigated target rocks and sediments can reproduce the observed PGE abundances of the impact‐melt rocks, suggesting that other PGE enrichment processes operated along with the meteoritic contamination. Possible explanations are 1) participation of unsampled target materials with high PGE abundances in the impact‐melt rocks, and 2) variable fractionations of PGE during syn‐ to post‐impact events.     

Target rocks,impact glasses,and melt rocks from the Lonar crater,India: Highly siderophile element systematics and Sr‐Nd‐Os isotopic signatures

The Lonar crater is a ~0.57‐Myr‐old impact structure located in the Deccan Traps of the Indian peninsula. It probably represents the best‐preserved impact structure hosted in continental flood basalts, providing unique opportunities to study processes of impact cratering in basaltic targets. Here we present highly siderophile element (HSE) abundances and Sr‐Nd and Os isotope data for target basalts and impactites (impact glasses and impact melt rocks) from the Lonar area. These tools may enable us to better constrain the interplay of a variety of impact‐related processes such as mixing, volatilization, and contamination. Strontium and Nd isotopic compositions of impactites confirm and extend earlier suggestions about the incorporation of ancient basement rocks in Lonar impactites. In the Re‐Os isochron plot, target basalts exhibit considerable scatter around a 65.6 Myr Re‐Os reference isochron, most likely reflecting weathering and/or magma replenishment processes. Most impactites plot at distinctly lower ¹⁸⁷Re/¹⁸⁸Os and ¹⁸⁷Os/¹⁸⁸Os ratios compared to the target rocks and exhibit up to two orders of magnitude higher abundances of Ir, Os, and Ru. Moreover, the impactites show near‐chondritic interelement ratios of HSE. We interpret our results in terms of an addition of up to 0.03% of a chondritc component to most impact glasses and impact melt rocks. The magnitude of the admixture is significantly lower than the earlier reported 12–20 wt% of extraterrestrial component for Lonar impact spherules, reflecting the typical difference in the distribution of projectile component between impact glass spherules and bulk impactites.     

Hydrothermal alteration at the Lonar Lake impact structure,India: Implications for impact cratering on Mars

Abstract— The 50,000 year old, 1.8 km diameter Lonar crater is one of only two known terrestrial craters to be emplaced in basaltic target rock (the 65 million year old Deccan Traps). The composition of the Lonar basalts is similar to martian basaltic meteorites, which establishes Lonar as an excellent analogue for similarly sized craters on the surface of Mars. Samples from cores drilled into the Lonar crater floor show that there are basaltic impact breccias that have been altered by post‐impact hydrothermal processes to produce an assemblage of secondary alteration minerals. Microprobe data and X‐ray diffraction analyses show that the alteration mineral assemblage consists primarily of saponite, with minor celadonite, and carbonate. Thermodynamic modeling and terrestrial volcanic analogues were used to demonstrate that these clay minerals formed at temperatures between 130°C and 200°C. By comparing the Lonar alteration assemblage with alteration at other terrestrial craters, we conclude that the Lonar crater represents a lower size limit for impact‐induced hydrothermal activity. Based on these results, we suggest that similarly sized craters on Mars have the potential to form hydrothermal systems, as long as liquid water was present on or near the martian surface. Furthermore, the Fe‐rich alteration minerals produced by post‐impact hydrothermal processes could contribute to the minor iron enrichment associated with the formation of the martian soil.     

Chromium isotopes identify the extraterrestrial component in impactites from Dhala impact structure,India

The Dhala structure in north-central India is a confirmed complex impact structure of Paleoproterozoic age. The presence of an extraterrestrial component in impactites from the Dhala structure was recognized by geochemical analyses of highly siderophile elements and Os isotopic compositions; however, the impactor type has remained unidentified. This study uses Cr isotope systematics to identify the type of projectile involved in the formation of the Dhala structure. Unlike the composition of siderophile elements (e.g., Ni, Cr, Co, and platinum group elements) and their inter-element ratios that may get compromised due to the extreme energy generated during an impact, Cr isotopes retain the distinct composition of the impactor. The distinct ε⁵⁴Cr value of −0.31 ± 0.09 for a Dhala impact melt breccia sample (D6-57) indicates inheritance from an impactor originating within the non-carbonaceous reservoir, that is, the inner Solar System. Based on the Ni/Cr ratio, Os abundance, and Cr isotopic composition of the samples, the impactor is constrained to be of ureilite type. Binary mixing calculations also indicate contamination of the target rock by 0.1–0.3 wt% of material from a ureilite-like impactor. Together with the previously identified impactors that formed El'gygytgyn, Zhamanshin, and Lonar impact structures, the Cr isotopic compositions of the Dhala impactites argue for a much more diverse source of the objects that collided with the Earth over its geological history than has been supposed previously.     

Geochemical evidence of an extraterrestrial component in impact melt breccia from the Paleoproterozoic Dhala impact structure,India

The Paleoproterozoic Dhala structure with an estimated diameter of ~11 km is a confirmed complex impact structure located in the central Indian state of Madhya Pradesh in predominantly granitic basement (2.65 Ga), in the northwestern part of the Archean Bundelkhand craton. The target lithology is granitic in composition but includes a variety of meta‐supracrustal rock types. The impactites and target rocks are overlain by ~1.7 Ga sediments of the Dhala Group and the Vindhyan Supergroup. The area was cored in more than 70 locations and the subsurface lithology shows pseudotachylitic breccia, impact melt breccia, suevite, lithic breccias, and postimpact sediments. Despite extensive erosion, the Dhala structure is well preserved and displays nearly all the diagnostic microscopic shock metamorphic features. This study is aimed at identifying the presence of an impactor component in impact melt rock by analyzing the siderophile element concentrations and rhenium‐osmium isotopic compositions of four samples of impactites (three melt breccias and one lithic breccia) and two samples of target rock (a biotite granite and a mafic intrusive rock). The impact melt breccias are of granitic composition. In some samples, the siderophile elements and HREE enrichment observed are comparable to the target rock abundances. The Cr versus Ir concentrations indicate the probable admixture of approximately 0.3 wt.% of an extraterrestrial component to the impact melt breccia. The Re and Os abundances and the ¹⁸⁷Os/¹⁸⁸Os ratio of 0.133 of one melt breccia specimen confirm the presence of an extraterrestrial component, although the impactor type characterization still remains inconclusive.     

Shocked rocks and impact glasses from the El'gygytgyn impact structure,Russia

Abstract— The El'gygytgyn impact structure is about 18 km in diameter and is located in the central part of Chukotka, arctic Russia. The crater was formed in volcanic rock strata of Cretaceous age, which include lava and tuffs of rhyolites, dacites, and andesites. A mid‐Pliocene age of the crater was previously determined by fission track (3.45 ± 0.15 Ma) and ⁴⁰Ar/³⁹Ar dating (3.58 ± 0.04 Ma). The ejecta layer around the crater is completely eroded. Shock‐metamorphosed volcanic rocks, impact melt rocks, and bomb‐shaped impact glasses occur in lacustrine terraces but have been redeposited after the impact event. Clasts of volcanic rocks, which range in composition from rhyolite to dacite, represent all stages of shock metamorphism, including selective melting and formation of homogeneous impact melt. Four stages of shocked volcanic rocks were identified: stage I (≤35 GPa; lava and tuff contain weakly to strongly shocked quartz and feldspar clasts with abundant PFs and PDFs; coesite and stishovite occur as well), stage II (35–45 GPa; quartz and feldspar are converted to diaplectic glass; coesite but no stishovite), stage III (45–55 GPa; partly melted volcanic rocks; common diaplectic quartz glass; feldspar is melted), and stage IV (>55 GPa; melt rocks and glasses). Two main types of impact melt rocks occur in the crater: 1) impact melt rocks and impact melt breccias (containing abundant fragments of shocked volcanic rocks) that were probably derived from (now eroded) impact melt flows on the crater walls, and 2) aerodynamically shaped impact melt glass “bombs” composed of homogeneous glass. The composition of the glasses is almost identical to that of rhyolites from the uppermost part of the target. Cobalt, Ni, and Ir abundances in the impact glasses and melt rocks are not or only slightly enriched compared to the volcanic target rocks; only the Cr abundances show a distinct enrichment, which points toward an achondritic projectile. However, the present data do not allow one to unambiguously identify a meteoritic component in the El'gygytgyn impact melt rocks.     

Variations in magnetic properties of target basalts with the direction of asteroid impact: Example from Lonar crater,India

Abstract– The Lonar crater in Maharashtra state, India, has been completely excavated on the Deccan Traps basalt (approximately 65 Ma) at approximately 570 ± 47 ka by an oblique impact of a possible chondritic asteroid that struck the preimpact target from the east at an angle of approximately 30–45^o to the horizon where the total duration of the shock event was approximately 1 s. It is shown by our early work that the distribution of ejecta and deformation of target rocks around the crater rim are symmetrical to the east–west plane of impact ( Misra et al. 2010 ). The present study shows that some of the rock magnetic properties of these shocked target basalts, e.g., low‐field anisotropy of magnetic susceptibility (AMS), natural remanent magnetization (NRM)/bulk susceptibility (χ), and high‐coercivity and high‐temperature (HC_HT) magnetization component, are also almost symmetrically oriented with reference to the plane of impact. Studies on the relative displacements of K₃ (minimum) AMS axes of shocked basalts from around the crater rim and from the adjacent target rocks to the approximately 2–3 km west of the crater center suggest that the impact stress could have branched out into the major southwestward and northwestward components in the downrange direction immediately after the impact. The biaxial distribution of AMS axes in stereographic plots for the unshocked basalts transforms mostly into triaxial distribution for the shocked basalts, although transitional type distribution also exists. The degree of anisotropy (P′) of AMS ellipsoids of the shocked basalts decreases by approximately 2% when compared with those of the unshocked target (approximately 1.03). The NRM/χ (Am^?1) values of the shocked basalts on the rim of the Lonar crater do not show much change in the uprange or downrange direction on and close to the east–west plane of impact, and the values are only approximately 1.5 times higher on average over the unshocked basalts around the crater. However, the values become approximately 1.4–16.4 times higher for the shocked basalts on the crater rim, which occur obliquely to the plane of impact. The target basalts at approximately 2–3 km west of the crater center in the downrange also show a significant increase (up to approximately 26 times higher) in NRM/χ. The majority of the shocked basalt samples (approximately 73%) from around the crater rim, in general, show a lowering of REM, except those from approximately 2–3 km west of the crater center in the downrange, where nearly half of the sample population shows a higher REM of approximately 3.63% in average. The shocked target basalts around the Lonar crater also acquired an HC_HT magnetization component due to impact. These HC_HT components are mostly oriented in the uprange direction and are symmetrically disposed about the east–west plane of impact, making an obtuse angle with the direction of impact. The low‐coercivity and low‐temperature (LC_LT) components of both the unshocked and shocked basalts are statistically identical to the present day field (PDF) direction. This could be chemical and/or viscous remanent magnetization acquired by the target basalts during the last 570 ± 47 ka, subsequent to the formation of the Lonar crater. The shocked Lonar target basalts appear to have remagnetized under high impact shock pressure and at low temperature of approximately 200–300 °C, where Ti‐rich titanomagnetite was the main magnetic remanence carrier.     

An unusual occurrence of coesite at the Lonar crater,India

Coesite has been identified within ejected blocks of shocked basalt at Lonar crater, India. This is the first report of coesite from the Lonar crater. Coesite occurs within SiO₂ glass as distinct ~30 μm spherical aggregates of “granular coesite” identifiable both with optical petrography and with micro‐Raman spectroscopy. The coesite+glass occurs only within former silica amygdules, which is also the first report of high‐pressure polymorphs forming from a shocked secondary mineral. Detailed petrography and NMR spectroscopy suggest that the coesite crystallized directly from a localized SiO₂ melt, as the result of complex interactions between the shock wave and these vesicle fillings.     

Geochemical studies of impact breccias and country rocks from the El'gygytgyn impact structure,Russia

The complex impact structure El'gygytgyn (age 3.6 Ma, diameter 18 km) in northeastern Russia was formed in ~88 Ma old volcanic target rocks of the Ochotsk‐Chukotsky Volcanic Belt (OCVB). In 2009, El'gygytgyn was the target of a drilling project of the International Continental Scientific Drilling Program (ICDP), and in summer 2011 it was investigated further by a Russian–German expedition. Drill core material and surface samples, including volcanic target rocks and impactites, have been investigated by various geochemical techniques in order to improve the record of trace element characteristics for these lithologies and to attempt to detect and constrain a possible meteoritic component. The bedrock units of the ICDP drill core reflect the felsic volcanics that are predominant in the crater vicinity. The overlying suevites comprise a mixture of all currently known target lithologies, dominated by felsic rocks but lacking a discernable meteoritic component based on platinum group element abundances. The reworked suevite, directly overlain by lake sediments, is not only comparatively enriched in shocked minerals and impact glass spherules, but also contains the highest concentrations of Os, Ir, Ru, and Rh compared to other El'gygytgyn impactites. This is—to a lesser extent—the result of admixture of a mafic component, but more likely the signature of a chondritic meteoritic component. However, the highly siderophile element contribution from target material akin to the mafic blocks of the ICDP drill core to the impactites remains poorly constrained.     

New insights on petrography and geochemistry of impactites from the Lonar crater,India

The Lonar impact crater, India, is one of the few known terrestrial impact craters excavated in continental basaltic target rocks (Deccan Traps, ~65 Ma). The impactites reported from the crater to date mainly include centimeter‐ to decimeter‐sized impact‐melt bombs, and aerodynamically shaped millimeter‐ and submillimeter‐sized impact spherules. They occur in situ within the ejecta around the crater rim and show schlieren structure. In contrast, non–in situ glassy objects, loosely strewn around the crater lake and in the ejecta around the crater rim do not show any schlieren structure. These non–in situ fragments appear to be similar to ancient bricks from the Daityasudan temple in the Lonar village. Synthesis of existing and new major and trace element data on the Lonar impact spherules show that (1) the target Lonar basalts incorporated into the spherules had undergone minimal preimpact alteration. Also, the paleosol layer as preserved between the top‐most target basalt flow and the ejecta blanket, even after the impact, was not a source component for the Lonar impactites, (2) the Archean basement below the Deccan traps were unlikely to have contributed material to the impactite parental melts, and (3) the impactor asteroid components (Cr, Co, Ni) were concentrated only within the submillimeter‐sized spherules. Two component mixing calculations using major oxides and Cr, Co, and Ni suggest that the Lonar impactor was a EH‐type chondrite with the submillimeter‐sized spherules containing ~6 wt% impactor components.     

Mineralogy and petrology of melt rocks from the Popigai impact structure,Siberia

Abstract— The late Eocene Popigai impact structure of Siberia comprises an approximately 0.5–1.5 km thick, ˜100 km diameter sequence of clast-rich and clast-poor andesitic to rhyolitic impact melt rocks and impact breccias, underlain by Archean to Proterozoic crystalline basement and Proterozoic to Phanerozoic sedimentary rocks. The fine-grained to cryptocrystalline texture of the more melt-rich rocks, despite their occurrence in bodies locally in excess of 800 m thick and 28 km long, suggests that the melt crystallized in response to (1) cooling by the clast load, and/or; (2) rapid nucleation on finely brecciated clasts, which have since been assimilated and/or; (3) crystallization enhanced by the relatively low water contents of the melts. Rapid crystallisation of the melt is indicated by the lack of zoning in minerals, the presence of glass, the lack of strain recovery features in clasts and the lack of evidence for fractionation in the major and trace elements, including the rare earth elements. Optical and analytical electron microscopy reveal that the previously reported division of the melt rocks into high- and low-temperature variants based on hand sample appearance, or glass content, is not warranted. Clasts within the melt-rich rocks exhibit a wide range of shock metamorphic features, though they are not distributed in the impact melts in a systematic manner. This indicates that the melt-rich rocks were well mixed during their formation, thus juxtaposing unshocked with shocked material. Injection of mesostasis melt into partially melted checkerboard plagioclase and orthopyroxene clasts also occurred during this mixing stage.     

Impact melt rocks from the Late Paleocene Hiawatha impact structure,northwest Greenland

Impact melt rocks formed during hypervelocity impact events are ideal for studying impact structures. Here, we describe impact melt rock samples collected proximal to the 31 km wide 58 Ma Hiawatha impact structure, northwest Greenland, which is completely covered by the Greenland Ice Sheet. The melt rocks contain diagnostic shock indicators (e.g., planar deformation features [PDF] in quartz and shocked zircon) and form three groups based on melt textures and chemistry: (i) hypocrystalline, (ii) glassy, and (iii) carbonate-based melt rocks. The exposed foreland directly in front of the structure consists of metasedimentary successions and igneous plutons; however, the carbonate-based impactites indicate a mixed target sequence with a significant carbonate-rich component. Well-preserved organic material in some melt rocks indicates that North Greenland at the time of impact was host to abundant organic material, likely a dense high-latitude temperate forest. Geochemical signatures of platinum-group elements in selected samples indicate an extraterrestrial component and support previous identification of a highly fractionated iron impactor in glaciofluvial sand. Our results illustrate the possibility to study impact structures hidden beneath a thick ice sheet based on transported samples and this opens a new avenue for identifying other potential impact craters in Greenland and Antarctica.     

Documentation of shock features in impactites from the Dhala impact structure,India

The fundamental approach for the confirmation of any terrestrial meteorite impact structure is the identification of diagnostic shock metamorphic features, together with the physical and chemical characterization of impactites and target lithologies. However, for many of the approximately 200 confirmed impact structures known on Earth to date, multiple scale‐independent tell‐tale impact signatures have not been recorded. Especially some of the pre‐Paleozoic impact structures reported so far have yielded limited shock diagnostic evidence. The rocks of the Dhala structure in India, a deeply eroded Paleoproterozoic impact structure, exhibit a range of diagnostic shock features, and there is even evidence for traces of the impactor. This study provides a detailed look at shocked samples from the Dhala structure, and the shock metamorphic evidence recorded within them. It also includes a first report of shatter cones that form in the shock pressure range from ~2 to 30 GPa, data on feather features (FFs), crystallographic indexing of planar deformation features, first‐ever electron backscatter diffraction data for ballen quartz, and further analysis of shocked zircon. The discovery of FFs in quartz from a sample of the MCB‐10 drill core (497.50 m depth) provides a comparatively lower estimate of shock pressure (~7–10 GPa), whereas melting of a basement granitoid infers at least 50–60 GPa shock pressure. Thus, the Dhala impactites register a strongly heterogeneous shock pressure distribution between <2 and >60 GPa. The present comprehensive review of impact effects should lay to rest the nonimpact genesis of the Dhala structure proposed by some earlier workers from India.     

Oxygen isotope composition of meteoritic ablation debris from the Transantarctic Mountains: Constraining the parent body and implications for the impact scenario

Abstract– Microscopic meteoritic ablation spheres recently found on top of the Victoria Land in Transantarctic Mountains, and in the L2 Dome C and DF2691 Dome Fuji ice core layers document a major impact of a 10⁸ kg (or larger) cosmic body in the Antarctic region about 480 kyr ago. Although of broadly chondritic composition, the exact nature of the impactor is unknown, and whether the impactor struck the Antarctic ice sheet or exploded in the atmosphere is a matter of debate. Based on oxygen isotope analyses of ablation spheres from the Transantarctic Mountains by means of IR‐laser fluorination coupled with mass spectrometry, we suggest that they represent the debris of an atmospheric airburst of a primitive asteroid of CV, CO, or CK composition, or a comet with composition similar to the short‐period comet 81P/Wild 2.     

Geochemical and petrographic characteristics of impactites and Cretaceous target rocks from the Yaxcopoil‐1 borehole,Chicxulub impact structure,Mexico: Implications for target composition

Abstract— We present major and trace element data as well as petrographic observations for impactites (suevitic groundmass, bulk suevite, and melt rock particles) and target lithologies, including Cretaceous anhydrite, dolomite, argillaceous limestone, and oil shale, from the Yaxcopoil‐1 borehole, Chixculub impact structure. The suevitic groundmass and bulk suevite have similar compositions, largely representing mixtures of carbonate and silicate components. The latter are dominated by melt rock particles. Trace element data indicate that dolomitic rocks represented a significant target component that became incorporated into the suevites; in contrast, major elements indicate a strong calcitic component in the impactites. The siliceous end‐member requires a mafic component in order to explain the low SiO₂ content. Multicomponent mixing of various target rocks, the high alteration state, and dilution by carbonate complicate the determination of primary melt particle compositions. However, two overlapping compositional groups can be discerned—a high‐Ba, low‐Ta group and a high‐Fe, high‐Zn, and high‐Hf group. Cretaceous dolomitic rocks, argillaceous limestone, and shale are typically enriched in U, As, Br, and Sb, whereas anhydrite contains high Sr contents. The oil shale samples have abundances that are similar to the North American Shale Composite (NASC), but with a comparatively high U content. Clastic sedimentary rocks are characterized by relatively high Th, Hf, Zr, As, and Sb abundances. Petrographic observations indicate that the Cretaceous rocks in the Yaxcopoil‐1 drill core likely register a multistage deformation history that spans the period from pre‐ to post‐impact. Contrary to previous studies that claimed evidence for the presence of impact melt breccia injection veins, we have found no evidence in our samples from a depth of 1347–1348 m for the presence of melt breccia. We favor that clastic veinlets occur in a sheared and altered zone that underwent intense diagenetic overprint prior to the impact event.     

Accessory and opaque minerals in impact melt rocks of the Boltysh structure,Ukraine

Electron microprobe analyses of accessory and opaque minerals from the impact melt rocks of the Boltysh structure, in the central part of the Ukrainian Shield, are presented in this report. Our study establishes a variety of minerals represented by native metals, alloys, oxides, sulfides, phosphates, and silicates, formed during several stages of cooling and solidification of the thick impact melt sheet. Baddeleyite was determined to be the earliest high‐temperature mineral to occur in the impact melt rocks. Iron and titanium oxides crystallized earlier or simultaneously with the microliths of orthopyroxene and feldspars. High concentrations of TiO₂, Al₂O₃, and Cr₂O₃ were identified in some hematite varieties. Cu‐ and Ni‐bearing pyrrhotites occur in impact melt rocks with a glassy matrix. Native metals—copper, platinum, and silver—were likely formed due to the hydrothermal alteration of the upper unit of the impact melt sheet. Zircon is the only accessory mineral found in impact melt rocks that is preserved from the basement granites of the Boltysh structure.     

Osmium isotope constraints on the proportion of bolide component in Chicxulub impact melt rocks

Abstract— The spatial distribution and amount of material transferred from the bolide involved in the Cretaceous/Tertiary (K/T) event to the target rocks at Chicxulub is still poorly constrained. In this study, Re‐Os isotopic analyses of impact melt breccias and lithic clasts from the Yaxcopoil‐1 (Yax‐1) borehole were used to determine the distribution and proportion of the bolide component in the target rocks. Because of the much greater concentration of Os in chondritic meteorites compared to the target rocks, little addition of the bolide component would be necessary to greatly perturb the Os concentration and isotopic composition of target rocks. Hence, this is a very sensitive means of examining bolide contributions to the target rocks. For the examined suite of samples, the initial ¹⁸⁷Os/¹⁸⁸Os ratios vary from 0.19 to 2.3. Conservative mixing calculations suggest that the bolide component comprised as much as approximately 0.1%, by mass, of some samples. Most samples, however, have negligible contributions from the bolide. No samples have Os that is dominated by the bolide component, so for this suite of samples, it is impossible to fingerprint the chemical nature of the bolide using relative abundances of siderophile elements. These results suggest that the bolide did not contribute a significant amount of material to the target rocks. This may, in turn, indicate that most of the bolide was vaporized upon impact or otherwise ejected without mixing with the melt from the target.     

Strontium and neodymium isotope systematics of target rocks and impactites from the El'gygytgyn impact structure: Linking impactites and target rocks

The 3.6 Ma El'gygytgyn structure, located in northeastern Russia on the Chukotka Peninsula, is an 18 km diameter complex impact structure. The bedrock is formed by mostly high‐silica volcanic rocks of the ~87 Ma old Okhotsk‐Chukotka Volcanic Belt (OCVB). Volcanic target rocks and impact glasses collected on the surface, as well as drill core samples of bedrock and impact breccias have been investigated by thermal ionization mass spectrometry (TIMS) to obtain new insights into the relationships between these lithologies in terms of Nd and Sr isotope systematics. Major and trace element data for impact glasses are added to compare with the composition of target rocks and drill core samples. Sr isotope data are useful tracers of alteration processes and Nd isotopes reveal characteristics of the magmatic sources of the target rocks, impact breccias, and impact glasses. There are three types of target rocks mapped on the surface: mafic volcanics, dacitic tuff and lava of the Koekvun’ Formation, and dacitic to rhyolitic ignimbrite of the Pykarvaam Formation. The latter represents the main contributor to the impact rocks. The drill core is divided into a suevite and a bedrock section by the Sr isotope data, for which different postimpact alteration regimes have been detected. Impact glasses from the present‐day surface did not suffer postimpact hydrothermal alteration and their data indicate a coherent alteration trend in terms of Sr isotopes with the target rocks from the surface. Surprisingly, the target rocks do not show isotopic coherence with the Central Chukotka segment of the OCVB or with the Berlozhya magmatic assemblage (BMA), a late Jurassic felsic volcanic suite that crops out in the eastern part of the central Chukotka segment of the OCVB. However, concordance for these rocks exists with the Okhotsk segment of the OCVB. This finding argues for variable source magmas having contributed to the build‐up of the OCVB.