首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 156 毫秒
1.
本文对滇西北24条中小型走滑断层的40组端点距L_d与错距(D)的数据进行了回归分析,发现二者具有良好的线性关系,即L_d=2.75D-0.15。由该区的断层破碎带宽度(W)与错距(D)的经验统计关系,得出了由最大断层破碎带宽度(W_(max))估计断层长度的表达式,即L=101.75W_(max)—0.30。在本文中,还应用上述关系式对有争议的定西岭断裂南延趋势及剑川—白汉场断裂的长度作了定量估计。  相似文献   

2.
The 10 January 2018 MW7.5 Swan island, Honduras earthquake occurred on the Swan island fault, which is a transform plate boundary between the North American and Caribbean plates. Here we back-project the rupture process of the earthquake using dense seismic stations in Alaska, and find that the earthquake ruptured at least three faults (three stages) for a duration of ~40 s. The rupture speed for the longest fault (stage 3) is as fast as 5 km/s, which is much faster than the local shear wave velocity of ~4 km/s. Supershear rupture was incidentally observed on long and straight strike-slip faults. This study shows a supershear rupture that occured on a strike-slip fault with moderate length, implying that supershear rupture might commonly occur on large strike-slip earthquakes. The common occurrence of supershear rupture on strike-slip earthquakes will challenge present understanding of crack physics, as well as strong ground motion evaluation in earthquake engineering.  相似文献   

3.
This study provides evidence for post-5 Ma shortening in the transition area between the Dinarides fold-and-thrust belt and the Pannonian Basin and reviews possible earthquake sources for the Banja Luka epicentral area (northern Bosnia and Herzegovina) where the strongest instrumentally recorded earthquake (ML 6.4) occurred on 27 October 1969. Geological, geomorphological and reflection seismic data provide evidence for a contractional reactivation of Late Palaeogene to Middle Miocene normal faults at slip rates below 0.1 mm/a. This reactivation postdates deposition of the youngest sediments in the Pannonian Basin of Pontian age (c. 5 Ma). Fault plane solutions for the main 1969 Banja Luka earthquake (ML 6.4) and its largest foreshock (ML 6.0) indicate reverse faulting along ESE–WNW-striking nodal planes and generally N–S trending pressure axes. The spatial distribution of epicentres and focal depths, analyses of the macroseismic field and fault-plane solutions for several smaller events suggest on-going shortening in the internal Dinarides. Seismic deformation of the upper crust is also associated with strike-slip faults, likely related to the NE–SW trending, sinistral Banja Luka fault. Possibly, this fault transfers contraction between adjacent segments of the Dinarides thrust system. The study area represents the seismically most active region of the Dinarides apart from the Adriatic Sea coast and the bend zone around Zagreb. We propose that on-going thrusting in the internal Dinarides thrust system takes up a portion of the current Adria–Europe convergence.  相似文献   

4.
Slip and length measurements on earthquakes suggest large stress drop variability. We analyze an extended set of slip-length measurements for large earthquakes (M  6) to seek for the possible origin(s) of this apparent variability. We propose that such variability arises from earthquakes breaking a variable number of major fault segments. That number depends on the strength of the inter-segment zones, which itself depends on the structural maturity of the faults. We propose new DmaxL parameterizations based on that idea of multiple segment-ruptures. In such parameterizations, each broken segment roughly scales as a crack, while the total multi-segment rupture does not. Stress drop on individual segments is roughly constant, only varying between 3.5 to 9 MPa. The slight variation that is still observed depends on fault structural maturity; more mature faults have lower stress drops than immature ones. The new DmaxL functions that we propose reduce uncertainties with respect to available relationships. They thus provide a more solid basis to estimate seismic hazard by integrating fault properties revealed by geological studies.  相似文献   

5.
We performed a tectonophysical analysis of earthquake frequency–size relationship types for large Central Asian earthquakes in the regions of dynamical influence due to major earthquake-generating faults based on data for the last 100 years. We identified four types of frequency–size curves, depending on the presence/absence of characteristic earthquakes and the presence or absence of a downward bend in the tail of the curve. This classification by the shape of the tail in frequency–size relationships correlates well with the values of the maximum observed magnitude. Thus, faults of the first type (there are characteristic earthquakes, but no downward bend) with Mmax ≥ 8.0 are classified as posing the highest seismic hazard; faults with characteristic earthquakes and a bend, and with Mmax = 7.5–7.9, are treated as rather hazardous; faults of the third type with Mmax = 7.1–7.5 are treated as posing potential hazard; and lastly, faults with a bend, without characteristic earthquakes, and with a typical magnitude Mmax ≤ 7.0, are classified as involving little hazard. The tail types in frequency–size curves are interpreted using the model of a nonlinear multiplicative cascade. The model can be used to treat different tail types as corresponding to the occurrence/nonoccurrence of nonlinear positive and negative feedback in earthquake rupture zones, with this feedback being responsible for the occurrence of earthquakes with different magnitudes. This interpretation and clustering of earthquake-generating faults by the behavior the tail of the relevant frequency–size plot shows raises the question about the physical mechanisms that underlie this behavior. We think that the occurrence of great earthquakes is related to a decrease in effective strength (viscosity) in the interblock space of faults at a scale appropriate to the rupture zone size.  相似文献   

6.
In this study, we aim to improve the scaling between the moment magnitude (M W), local magnitude (M L), and the duration magnitude (M D) for 162 earthquakes in Shillong-Mikir plateau and its adjoining region of northeast India by extending the M W estimates to lower magnitude earthquakes using spectral analysis of P-waves from vertical component seismograms. The M W-M L and M W-M D relationships are determined by linear regression analysis. It is found that, M W values can be considered consistent with M L and M D, within 0.1 and 0.2 magnitude units respectively, in 90 % of the cases. The scaling relationships investigated comply well with similar relationships in other regions in the world and in other seismogenic areas in the northeast India region.  相似文献   

7.
The late Neogene to Quaternary volcanism in Eastern Anatolia is related to the Arabia–Eurasia convergence but a clear deformation pattern has not yet been established in this region. We have used the distribution and shape of volcanoes and fault geometry as indicators of the tectonic regime. Volcanic edifices and related faults were analyzed in vertical view using SAR–ERS, Spot images and a Digital Elevation Model (DEM). In several places, adjacent volcanoes that form linear clusters or elongated volcanoes are clearly rooted on vertical tension fractures. These are compatible with horizontal σ3 striking 90°N, associated with σ1 horizontal (strike-slip regime) or vertical (extensional regime). We mapped the recent faults that are directly associated to volcanoes. Volcanic vents are related to tail-crack, horsetail or releasing bend structures. In this work, it has been possible to define the ESE-striking, 270-km-long Tutak–Hamur–Çaldiran fault that forms a releasing bend testifying to right-lateral motion. Extension is well documented for few places but no recent fold has been observed. Since 8 Ma, the tectonic system is principally strike-slip. Most of the tension fractures being 2 to 10 km in length, so we infer that they affect only part of the crust. Most strike-slip fault zones are of several tens to a few hundred kilometers long and thus not of lithospheric scale. Therefore, the channels used by the magma to reach the surface are crustal structures.  相似文献   

8.
Large-scale ancient seismic dislocations represented by faults, landslides, and rockavalanches were discovered by remote sensing on the southeastern slope of the Andian Ridge in Dagestan. As a result of the strongest of these land- and rock-slides, dammed Lake Kezenoy-Am was formed. Essential structural features of the ruptures provide undoubted evidence of the seismotectonic origin of the latter. The kinematics of the ruptures (left-lateral strike-slip and thrust) is in conformity with geological data on neotectonic displacements in the Andian deep-seated fault zone. The acquired data allow considering this deep fault to be a major seismogenic structure and confirm the presence of a potential earthquake focus with M max = 7.0 disclosed previously in the Andian fault zone.  相似文献   

9.
The various useful source-parameter relations between seismic moment and common use magnitude lg(M 0) andM s,M L,m b; between magnitudesMs andM L,M s andm b,M L andm b; and between magnitudeM s and lg(L) (fault length), lg (W) (fault width), lg(S) (fault area), lg(D) (average dislocation);M L and lg(f c) (corner frequency) have been derived from the scaling law which is based on an “average” two-dimensional faulting model of a rectangular fault. A set of source-parameters can be estimated from only one magnitude by using these relations. The average rupture velocity of the faultV r=2.65 km/s, the total time of ruptureT(s)=0.35L (km) and the average dislocation slip rateD=11.4 m/s are also obtained. There are four strong points to measure earthquake size with the seismic moment magnitudeM w.
  1. The seismic moment magnitude shows the strain and rupture size. It is the best scale for the measurement of earthquake size.
  2. It is a quantity of absolute mechanics, and has clear physical meaning. Any size of earthquake can be measured. There is no saturation. It can be used to quantify both shallow and deep earthquakes on the basis of the waves radiated.
  3. It can link up the previous magnitude scales.
  4. It is a uniform scale of measurement of earthquake size. It is suitable for statistics covering a broad range of magnitudes. So the seismic moment magnitude is a promising magnitude and worth popularization.
  相似文献   

10.
The emplacement conditions for 39 igneous dikes cutting basalts in northwestern Ethiopia are evaluated by analyzing their displacement–length scaling relations. Maximum opening displacements and lengths of the dikes demonstrate displacement–length scaling of the form Dmax = 0.088L0.48, consistent with other populations of dikes and veins and different than the power-law scaling relation typically found for faults. The dikes propagated through the thin Trap basalt sequence under conditions of constant fracture toughness, with values corrected for three-dimensional dike geometry of ~ 77–273 MPa m1/2. The large values of fracture toughness are likely associated with (1) the toughening effects of near-tip damage, (2) mixed-mode dike propagation, as shown by magma flow fabric analysis through anisotropy of magnetic susceptibility (AMS) and image analysis of thin sections, and (3) elevated temperature within the blocky and ductile basaltic host rock, evidence of which has been found in the field.  相似文献   

11.
The Ganzi-Yushu-Xianshuihe Fault Zone (GYXFZ) is a typical active strike-slip fault that has triggered many large historic earthquakes, including the 2010 Mw 6.9 Yushu earthquake in the central Tibetan Plateau. This fault zone extends for ca. 800 km from the central Tibetan Plateau to its southeastern margin and varies in trend from WNW-ESE in the northwestern segment of the fault zone to NNW-SSE in the southeastern segment, having the geometry of an arc projecting northeastwards. In this study, we present evidence for the systematical sinistral deflection and/or offset of the Yangtze River and its branch stream channels and valleys along the GYXFZ. Topographic analysis of three-dimensional (3D) perspective images constructed using digital elevation model (DEM) data, 0.5 m-resolution WorldView and GeoEye images, and 15 m-resolution Landsat-Enhanced Thematic Mapper (ETM+) images, together with analysis of geological structures, reveals the following: (i) the main river channels and valleys of the Yangtze River drainage system show systematic sinistral deflections and/or offsets along the GYXFZ; (ii) various amounts of sinistral offset have accumulated on the tributary stream channels, valleys, and gullies of the Yangtze River along the fault, with a linear relation, D = aL, between the upstream length L from the deflected point and the offset amount D with a certain coefficient a; (iii) the maximum amount of sinistral offset is up to ca. 60 km, which was accumulated in the past 13–5 Ma; and (iv) the long-term average strike-slip rate is ca. 4.6–12 mm/year. Geological and geomorphic evidence, combined with geophysical data, demonstrates that the GYXFZ is currently active as one of the major seismogenic faults in the Tibetan Plateau, dominated by left-lateral strike-slip motion. Our findings supply important evidence for the tectonic evolution of strike-slip faults in the Tibetan Plateau since the Eurasia-India continental collision.  相似文献   

12.
The interpretation of the nature and parameters of the source for the earthquake that occurred in Sumatra on December 26, 2004 is suggested. Our study relies on a variety of data on the geological structure of the region, long-term seismicity, spatial distribution of the foreshocks and aftershocks, and focal mechanisms; and the pattern of shaking and tsunami, regularities in the occurrence of the earthquakes, and the genetic relationship between the seismic and geological parameters inherent in various types of seismogenic zones including island arcs. The source of the Sumatran earthquake is a steep reverse fault striking parallel to the island arc and dipping towards the ocean. The length of the fault is ~450 km, and its probable bedding depth is ~70–100 km. The magnitude of this seismic event corresponding to the length of its source is 8.9–9.0. The vertical displacement in the source probably reached 9–13 m. The fault is located near the inner boundary of the Aceh Depression between the epicenter of the earthquake and the northern tip of the depression. The strike-slip and strike-slip reverse the faults cutting the island arc form the northern and southern borders of the source. The location and source parameters in the suggested interpretation account quite well for the observed pattern of shaking and tsunami. The Aceh Depression and its environs probably also host other seismic sources in the form of large reverse faults. The Sumatran earthquake, which was the culmination of the seismogenic activation of the Andaman-Sumatra island arc in the beginning of XXI century, is a typical tsunamigenic island-arc earthquake. By its characteristics, this event is an analogue to the M W = 9 Kamchatka earthquake of November 4, 1952. The spatial distribution of the epicenters and the focal mechanisms of the aftershocks indicate that the repeated shocks during the Sumatran event were caused by the activation of a complex system of geological structures in various parts of the island arc and Andaman Sea instead of the slips on a single rupture (a subduction thrust about 1200–1300 km in length).  相似文献   

13.
An attempt has been made to examine an empirical relationship between moment magnitude (M W) and local magnitude (M L) for the earthquakes in the northeast Indian region. Some 364 earthquakes that were recorded during 1950–2009 are used in this study. Focal mechanism solutions of these earthquakes include 189 Harvard-CMT solutions (M W?≥?4.0) for the period 1976–2009, 61 published solutions and 114 solutions obtained for the local earthquakes (2.0?≤?M L?≤?5.0) recorded by a 27-station permanent broadband network during 2001–2009 in the region. The M WM L relationships in seven selected zones of the region are determined by linear regression analysis. A significant variation in the M WM L relationship and its zone specific dependence are reported here. It is found that M W is equivalent to M L with an average uncertainty of about 0.13 magnitude units. A single relationship is, however, not adequate to scale the entire northeast Indian region because of heterogeneous geologic and geotectonic environments where earthquakes occur due to collisions, subduction and complex intra-plate tectonics.  相似文献   

14.
We investigate the geometry and kinematics of the faults exposed in basement rocks along the Strouma River in SW Bulgaria as well as the sequence of faulting events in order to place constraints on the Cenozoic kinematic evolution of this structurally complex domain. In order to decipher the successive stress fields that prevailed during the tectonic history, we additionally carried out an analysis of mesoscale striated faults in terms of paleostress with a novel approach. This approach is based on the P–T axes distribution of the fault-slip data, and separates the fault-slip data into different groups which are characterized by kinematic compatibility, i.e., their P and T axes have similar orientations. From these fault groups, stress tensors are resolved and in case these stress tensors define similar stress regimes (i.e., the orientations of the stress axes and the stress shape ratios are similar) then the fault groups are further unified. The merged fault groups after being filled out with those fault-slip data that have not been incorporated into the above described grouping, but which present similar geometric and kinematic features are used for defining the final stress regimes. In addition, the sequence of faulting events was constrained by available tectonostratigraphic data.Five faulting events named D1, D2, D3, D4 and D5 are distinguished since the Late Oligocene. D1 is a pure compression stress regime with σ1 stress axis trending NNE-SSW that mainly activated the WNW-ESE to ENE-WSW faults as reverse to oblique reverse and the NNW-SSE striking as right-lateral oblique contractional faults during the Latest Oligocene-Earliest Miocene. D2 is a strike-slip − transpression stress regime with σ1 stress axis trending NNE-SSW that mainly activated the NNW-SSE to N-S striking as right-lateral strike-slip faults and the ENE-WSW striking faults as left-lateral strike-slip ones during the Early-Middle Miocene. D3 extensional event is associated with a NW-SE to WNW-ESE extension causing the activation of mainly low-angle normal faults of NE-SW strike and NNE-SSW to NNW-SSE striking high-angle normal faults. D4 is an extensional event dated from Late Miocene to Late Pliocene. It activated NNW-SSE to NW-SE faults as normal faults and E-W to WNW-ESE faults as right-lateral oblique extensional faults. The latest D5 event is an N-S extensional stress regime that dominates the wider area of SW Bulgaria in Quaternary times. It mainly activated faults that generally strike E-W (ENE-WSW and WNW-ESE) normal faults, along which fault-bounded basins developed. The D1 and D2 events are interpreted as two progressive stages of transpressional tectonics related to the late stages of collision between Apulia and Eurasia plates. These processes gave rise to the lateral extrusion of the Rhodope and Balkan regions toward the SE along the Strouma Lineament. The D3 event is attributed to the latest stage of this collision, and represents the relaxation of the overthickened crust along the direction of the lateral extrusion. The D4 and D5 events are interpreted as post-orogenic extensional events related to the retreat of the Hellenic subduction zone since the Late Miocene and to the widespread back-arc Aegean extension still prevailing today.  相似文献   

15.
The Gobi Altai region of southwestern Mongolia is a natural laboratory for studying processes of active, transpressional, intracontinental mountain building at different stages of development. The region is structurally dominated by several major E—W left-lateral strike-slip fault systems. The North Gobi Altai fault system is a seismically active, right-stepping, left-lateral, strike-slip fault system that can be traced along the surface for over 350 km. The eastern two-thirds of the fault system ruptured during a major earthquake (M = 8.3) in 1957, whereas degraded fault scarps cutting alluvial deposits along the western third of the system indicate that this segment did not rupture during the 1957 event but has been active during the Quaternary. The highest mountains in the Gobi Altai are restraining bend uplifts along the length of the fault system. Detailed transects across two of the restraining bends indicate that they have asymmetric flower structure cross-sectional geometries, with thrust faults rooting into oblique-slip and strike-slip master faults. Continued NE-directed convergence across the fault system, coupled with left-lateral strike-slip displacements, will lead to growth and coalescence of the restraining bends into a continuous sublinear range, possibly obscuring the original strike-slip fault system; this may be a common mountain building process.

The largely unknown Gobi-Tien Shan fault system is a major left-lateral strike-slip fault system (1200 km + long) that links the southern ranges of the Gobi Altai with the Barkol Tagh and Bogda Shan of the easternmost Tien Shan in China. Active scarps cutting alluvial deposits are visible on satellite imagery along much of its central section, indicating Quaternary activity. The total displacement is unknown, but small parallel splays have apparent offsets of 20 + km, suggesting that the main fault zone has experienced significantly more displacement. Field investigations conducted at two locations in southwestern Mongolia indicate that late Cenozoic transpressional uplift is still active along the fault system. The spatial relationship between topography and active faults in the Barkol Tagh and Bogda Shan strongly suggests that these ranges are large, coalescing, restraining bends that have accommodated the fault's left-lateral motion by thrusting, oblique-slip displacement and uplift. Thus, from a Mongolian perspective, the easternmost Tien Shan formed where it is because it lies at the western termination zone of the Gobi-Tien Shan fault system. The Gobi-Tien Shan fault system is one of the longest fault systems in central Asia and, together with the North Gobi Altai and other, smaller, subparallel fault systems, is accommodating the eastward translation of south Mongolia relative to the Hangay Dome and Siberia. These displacements are interpreted to be due to eastward viscous flow of uppermost mantle material in the topographically low, E–W trending corridor between the northern edge of the Tibetan Plateau and the Hangay Dome, presumably in response to the Indo-Eurasian collision 2500 km to the south.  相似文献   


16.
Fault segmentation and fault steps and their evolution are relevant to the dynamics and size of earthquake ruptures, the distribution of fault damage zones and the capacity of fault seal. Furthermore, segment interactions and coalescence are the fundamental processes for fault growth. To contribute to this end, we investigated the architecture of strike-slip faults by combining field observations in the Valley of Fire State Park, Nevada, and the published data sets. First, we studied the trace complexity for 49 faults with offsets ranging from 12 m to 460 km. We established that the number of fault steps (hence fault segments) per unit length is correlated to the maximum fault offset by a negative power law. The faults have longer segments and fewer steps when their offsets increase, indicating the progressive growth, smoothening and simplification of the fault traces as a function of the offset, as proposed by previous investigators. Second, we studied the dimensions of the segments and steps composing ~20 of the previous fault systems. The mean segment length, mean step length and mean step width are all correlated to the maximum fault offset by positive power laws over four orders of magnitude of the offset. In addition, the segment length distributions of four of the faults with offsets ranging from 80 m to 100 km are all lognormal, with most of the segment lengths falling in the range of one to five times the maximum offset of the faults. Finally, the fault steps have an approximately constant length-to-width ratio indicating that, regardless of their environment, strike-slip faults have a remarkable self-similar architecture probably due to the mechanical processes responsible for fault growth. Our data sets can be used as tools to better predict the geometrical attributes of strike-slip fault systems with important consequences for earthquake ruptures, the distribution and properties of fault damage zones, and fault sealing potential.  相似文献   

17.
The radiation belt dynamics during the extreme solar events in November 2004 and January 2005 is studied based on the measurements of relativistic electrons (with energies of 0.8–8 MeV) on the Express-A2 geostationary satellite and Meteor-3M polar satellite. New radiation belts of relativistic electrons in the space (L ~ 3) between the stationary outer and inner belts were formed as a result of either superstorm (|Dst|max = 373 and 289 nT). The position of the maximums of these belts (L max = 2.9 and 3.1) coincides with the known dependence of L max on the magnetic storm Dst variation amplitude: |Dst|max = 2.75 × 104/L max 4 . In November–December the new belt very slowly (ΔL ~ 0.1 per month) shifted toward the Earth. During the series of moderate (~100 nT) magnetic storms that developed as a result of the extreme solar events in January 2005, the belt in the space shifted toward deeper L shells (L ~ 2.5). The moderate January storms produced new belts with L max ≥ 4.  相似文献   

18.
The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province MS6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, landslide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mechanism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er MS6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of MS≥2 is 330°, and the focal depths are within the range of 3~12 km, predominantly within 3~10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic framework might be the main cause of the frequent occurrence of MS6.0~6.9 earthquakes in the area.  相似文献   

19.
运用Sentinel-1A卫星数据和D-InSAR技术,获取2021-05-21云南漾濞M_S6.4地震的同震形变场。结果显示,漾濞地震同震形变场长轴近NW展布升降轨形变场符号相反,视线向最大沉降量和抬升量为0.1 m。InSAR同震形变场反演的滑动分布主要集中在沿走向2~12 km,倾向1~9 km的范围内,最大滑动量0.35 m,发震断层长9.8 km、宽4 km,滑动量主要集中在地下3~6 km范围内,滑动角-146.7°。同震位移场及滑动分布模型反映本次地震为发震断层的右旋走滑事件,地震破裂未达到地表。断层模型反演结果显示,矩震级为M_W6.1,发震断层以北西走向右旋走滑运动为主,初步认为本次M_W6.1地震发震断裂可能是一条NW向的维西—乔后断裂西侧的隐伏次生断裂。  相似文献   

20.
通过对汗母坝-澜沧断裂晚第四纪地质、地貌实地调查与测量,并结合前人研究成果,讨论了该断裂晚第四纪最新构造活动特征。综合分析认为,汗母坝-澜沧断裂为一条以右旋走滑为主的全新世活动断裂,长约120 km,整体走向NNW。该断裂活动习性具有明显的分段特征,北段称为汗母坝断裂,是1988年耿马7.2级地震的发震断裂;南段称为澜沧断裂,是1988年澜沧7.6级地震的发震断裂之一。晚第四纪以来其新活动形成了丰富的断错地貌现象,如冲沟和山脊右旋位错、断层沟槽、断层垭口、断层陡坎、断陷凹坑等。根据断裂断错地貌特征的相应资料估计,该断裂晚第四纪右旋走滑速率约为(4.7±0.5) mm/a。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号