Monitoring aboveground forest biomass dynamics over three decades using Landsat time-series and single-date inventory data

Understanding forest biomass dynamics is crucial for carbon and environmental monitoring, especially in the context of climate change. In this study, we propose a robust approach for monitoring aboveground forest biomass (AGB) dynamics by combining Landsat time-series with single-date inventory data. We developed a Random Forest (RF) based kNN model to produce annual maps of AGB from 1988 to 2017 over 7.2 million ha of forests in Victoria, Australia. The model was internally evaluated using a bootstrapping technique. Predictions of AGB and its change were then independently evaluated using multi-temporal Lidar data (2008 and 2016). To understand how natural and anthropogenic processes impact forest AGB, we analysed trends in relation to the history of disturbance and recovery. Specifically, change metrics (e.g., AGB loss and gain, Years to Recovery - Y2R) were calculated at the pixel level to characterise the patterns of AGB change resulting from forest dynamics. The imputation model achieved a RMSE value of 132.9 Mg ha⁻¹ (RMSE% = 46.3%) and R² value of 0.56. Independent assessments of prediction maps in 2008 and 2016 using Lidar-based AGB data achieved relatively high accuracies, with a RMSE of 108.6 Mg ha⁻¹ and 135.9 Mg ha⁻¹ for 2008 and 2016, respectively. Annual validations of AGB maps using un-changed, homogenous Lidar plots suggest that our model is transferable through time (RMSE ranging from 109.65 Mg ha⁻¹ to 112.27 Mg ha⁻¹ and RMSE% ranging from 25.38% to 25.99%). In addition, changes in AGB values associated with forest disturbance and recovery (decrease and increase, respectively) were captured by predicted maps. AGB change metrics indicate that AGB loss and Y2R varied across bioregions and were highly dependent on levels of disturbance severity (i.e., a greater loss and longer recovery time were associated with a higher severity disturbance). On average, high severity fire burnt from 200 Mg ha⁻¹ to 550 Mg ha⁻¹ of AGB and required up to 15 years to recover while clear-fell logging caused a reduction in 250 Mg ha⁻¹ to 600 Mg ha⁻¹ of AGB and required nearly 20 years to recover. In addition, AGB within un-disturbed forests showed statistically significant but monotonic trends, suggesting a mild gradual drop over time across most bioregions. Our methods are designed to support forest managers and researchers in developing forest monitoring systems, especially in developing regions, where only a single date forestry inventory exists.     

Mapping burns and natural reforestation using thematic Mapper data

Remote sensing techniques are specially suitable to detect and to map areas affected by forest fires. In this work, Landsat 5 Thematic Mapper (TM) data has been used to study a number of forest fires that occurred in the province of Valencia (Spain) and to monitor the vegetation regeneration over burnt areas.

A reference area (non‐burnt forest) was established to assess the change produced by fire. The radiance in the thermal band (10.4–12.5 μm) and the normalized difference in reflectance between near 1R (0.76–0.90 μm) and middle IR (2.08–2.35 μm) were the most suitable parameters to map burnt areas. This index can also be used for monitoring vegetation regeneration in burnt areas. About a month after the fire, the burns show temperatures of 5–6 °C higher than those found in the reference area, and the vegetation index shows negative values whereas the reference area values remain positive. The differences between the burns and the reference area for the vegetation index decrease with time as vegetation regenerates.     

Updating Landsat time series of surface-reflectance composites and forest change products with new observations

The use of time series satellite data allows for the temporally dense, systematic, transparent, and synoptic capture of land dynamics over time. Subsequent to the opening of the Landsat archive, several time series approaches for characterizing landscape change have been developed, often representing a particular analytical time window. The information richness and widespread utility of these time series data have created a need to maintain the currency of time series information via the addition of new data, as it becomes available. When an existing time series is temporally extended, it is critical that previously generated change information remains consistent, thereby not altering reported change statistics or science outcomes based on that change information. In this research, we investigate the impacts and implications of adding additional years to an existing 29-year annual Landsat time series for forest change. To do so, we undertook a spatially explicit comparison of the 29 overlapping years of a time series representing 1984–2012, with a time series representing 1984–2016. Surface reflectance values, and presence, year, and type of change were compared. We found that the addition of years to extend the time series had minimal effect on the annual surface reflectance composites, with slight band-specific differences (r ≥ 0.1) in the final years of the original time series being updated. The area of stand replacing disturbances and determination of change year are virtually unchanged for the overlapping period between the two time-series products. Over the overlapping temporal period (1984–2012), the total area of change differs by 0.53%, equating to an annual difference in change area of 0.019%. Overall, the spatial and temporal agreement of the changes detected by both time series was 96%. Further, our findings suggest that the entire pre-existing historic time series does not need to be re-processed during the update process. Critically, given the time series change detection and update approach followed here, science outcomes or reports representing one temporal epoch can be considered stable and will not be altered when a time series is updated with newly available data.     

Forest Fire Burnt Area Assessment in the Biodiversity Rich Regions Using Geospatial Technology: Uttarakhand Forest Fire Event 2016

The hills of Uttarakhand witness forest fire every year during the summer season and the number of these fire events is reported to have increased due to increased anthropogenic disturbances as well as changes in climate. These fires cause significant damage to the natural resources which can be mapped and monitored using satellite images by virtue of its synoptic coverage of the landscape and near real time monitoring. This study presents burnt area assessment caused by the fire episode of April 2016 to the forest vegetation. Digital classification of satellite images was done to extract the burnt area which was found to be 3774.14 km², representing 15.28% of the total forest area of the state. It also gives an account of cumulative progression of forest fire in Uttarakhand using satellite images of three dates viz. 23rd, 27th May and 2nd June, 2016. Results were analyzed at district, administrative and forest division level using overlay analysis. Separate area statistics were given for different categories of biological richness, forest types and protected areas affected by forest fire. The burnt area assessment can be used in mitigation planning to prevent drastic ecological impacts of the forest fire on the landscape.     

Forest fire susceptibility modeling using hybrid approaches

Forest fires are considered one of the most highly damaging and devastating of natural disasters, causing considerable casualties and financial losses every year. Hence, it is important to produce susceptibility maps for the management of forest fires so as to reduce their harmful effects. The purpose of this study is to map the susceptibility to forest fires over Nowshahr County in Iran, using an integrated approach of index of entropy (IOE) with fuzzy membership value (FMV), frequency ratio (FR), and information value (IV) with a comparison of their precision. The spatial database incorporated the inventory of forest fire and conditioning factors. As a whole, 41 forest fire locations were identified. Out of these, 29 locations (≈70%) were randomly chosen for the forest fire susceptibility modeling (FFSM), and the remaining 12 locations (≈30%) were utilized for the validation of the models. Subsequently, utilizing FMV‐IOE, FR‐IOE, and IV‐IOE models, forest fire susceptibility maps were acquired. Finally, the modeling ability of the models for FFSM was assessed using an area under the receiver operating characteristic (AUROC) curve. The results manifested that the prediction accuracy of the FMV‐IOE model is slightly higher than that of the FR‐IOE and IV‐IOE models. The incorporation of IOE with FMV, FR, and IV models had AUROC values of 0.890, 0.887, and 0.878, respectively. The resulting FFSM can be effective in fire repression resource planning, sustainable development, and primary warning in regions with similar conditions.     

森林火灾后生态变化遥感监测评价模型的构建方法研究

通过攀西林区云南松林的一系列旧火烧迹地的更新恢复和生态变化的遥感调查，对各生态因子的空间分布特征及生态变化的影响规律进行分析，确定了评价因子（变量）及其评价标准，利用遥感信息，以及地形、土壤、林分和林木受害程度等要素的８个因子的模糊综合评判结果和火烧年限等为变量，通过多组数据的多元统计分析，建成森林火灾后生态变化遥感监测评价模型，经野外调查结果验证分析，达到了预期的攻关目标。为使该模型能适应森林生态遥感监测运行系统的需要，对各监测因子数据的获取、植被指数的提取等方面进行了深入的方法探索。     

Multi‐temporal Mapping of Burned Forest over Canada Using Satellite‐based Change Metrics

Abstract

A procedure for continental‐scale mapping of burned boreal forest at 10‐day intervals was developed for application to coarse resolution satellite imagery. The basis of the technique is a multiple logistic regression model parameterized using 1998 SPOT‐4 VEGETATION clear‐sky composites and training sites selected across Canada. Predictor features consisted of multi‐temporal change metrics based on reflectance and two vegetation indices, which were normalized to the trajectory of background vegetation to account for phenological variation. Spatial‐contextual tests applied to the logistic model output were developed to remove noise and increase the sensitivity of detection. The procedure was applied over Canada for the 1998‐2000 fire seasons and validated using fire surveys and burned area statistics from forest fire management agencies. The area of falsely mapped burns was found to be small (3.5% commission error over Canada), and most burns larger than 10 km2 were accurately detected and mapped (R² = 0.90, P<0.005, n = 91 for burns in two provinces). Canada‐wide satellite burned area was similar, but consistently smaller by comparison to statistics compiled by the Canadian Interagency Forest Fire Centre (by 17% in 1998, 16% in 1999, and 3% in 2000).     

Assessment of the three factors affecting Myanmar's forest cover change using Landsat and MODIS vegetation continuous fields data

Long-term observation of the earth is essential for studying the factors affecting global environmental changes. Digital earth technology can facilitate the monitoring of global environmental change with its ability to process vast amounts of information. In this study, we map the forest cover change of Myanmar from 2000 to 2005 using a training data automation procedure and support vector machines algorithm. Our results show that Myanmar's forests have declined 0.68% annually over this six-year period. We validated our derived change results and found the overall accuracy to be greater than 88%. We also assessed forest loss from protected areas, areas close to roads, and areas subject to fire, which were most likely to lose forested area. The results revealed the main reasons for forest losses in some hotspots to be increased agricultural conversion, fire, and the construction of highways. This information is useful for identifying the driving forces behind forest changes and to support environmental policy development in Myanmar.     

近实时中高空间分辨率森林火灾监测系统展望

森林火灾是最为常见的灾害之一,严重危及人类生命安全。及时准确监测森林火灾的发生及火场状况,对应对火灾及减少损失至关重要。当前,森林火灾卫星遥感监测主要以低空间分辨率的卫星遥感为主,空间分辨率过低导致无法探测规模较小火灾及掌握详细火场态势。针对这一问题,结合近些年中高空间分辨率卫星观测、共享及处理能力的发展,本文从森林火灾卫星遥感监测的基本原理、当前可用中高空间分辨率卫星数据及其特点、中高分辨率森林着火区监测算法,以及数据共享与云端存储与计算等4个技术环节,对森林火灾中高分辨率卫星遥感监测当前研究现状与存在问题进行了总结,阐述了近实时中高空间分辨率森林火灾监测系统的可行性。近实时中高空间分辨率森林火灾监测系统可对已有低空间分辨率森林火灾监测体系形成重要补充,依托其空间分辨率的优势有助于及早、准确发现小规模火情,进而为森林火灾的防治与管理提供更好支撑。     

用SPOT卫星影像研究阿木尔林业局森林火灾损失

本研究以1987年5月30日接收的法国SPOT卫星标准假彩色合成影像为主要信息源,对大兴安岭阿木尔林业局火灾造成的林地损失进行了研究。文中着重介绍了面积量算方法、原理和误差;选取适量地面样地,用抽样统计和角规辅助目测方法计算蓄积损失并与二类调查结果进行比较;在影像上按火烧等级的判读结果、现地景观与烧死率─火灾的定量描述,及三者之间的一致性。结果表明,应用SPOT卫星资料,按本研究所介绍的方法进行火灾损失估计,可快速、经济地获得所需结果,并可满足精度要求。     

Modeling of multi-strata forest fire severity using Landsat TM Data

Most of fire severity studies use field measures of composite burn index (CBI) to represent forest fire severity and fit the relationships between CBI and Landsat imagery derived differenced normalized burn ratio (dNBR) to predict and map fire severity at unsampled locations. However, less attention has been paid on the multi-strata forest fire severity, which represents fire activities and ecological responses at different forest layers. In this study, using field measured fire severity across five forest strata of dominant tree, intermediate-sized tree, shrub, herb, substrate layers, and the aggregated measure of CBI as response variables, we fit statistical models with predictors of Landsat TM bands, Landsat derived NBR or dNBR, image differencing, and image ratioing data. We model multi-strata forest fire in the historical recorded largest wildfire in California, the Big Sur Basin Complex fire. We explore the potential contributions of the post-fire Landsat bands, image differencing, image ratioing to fire severity modeling and compare with the widely used NBR and dNBR. Models using combinations of post-fire Landsat bands perform much better than NBR, dNBR, image differencing, and image ratioing. We predict and map multi-strata forest fire severity across the whole Big Sur fire areas, and find that the overall measure CBI is not optimal to represent multi-strata forest fire severity.     

Comparison of Two Data Smoothing Techniques for Vegetation Spectra Derived From EO-1 Hyperion

Hyperspectral data are generally noisier compared to broadband multispectral data because their narrow bandwidth can only capture very little energy that may be overcome by the self-generated noise inside the sensors. It is desirable to smoothen the reflectance spectra. This study was carried out to see the effect of smoothing algorithms - Fast-Fourier Transform (FFT) and Savitzky–Golay (SG) methods on the statistical properties of the vegetation spectra at varying filter sizes. The data used in the study is the reflectance spectra data obtained from Hyperion sensor over an agriculturally dominated area in Modipuram (Uttar Pradesh). The reflectance spectra were extracted for wheat crop at different growth stages. Filter sizes were varied between 3 and 15 with the increment of 2. Paired t-test was carried out between the original and the smoothed data for all the filter sizes in order to see the extent of distortion with changing filter sizes. The study showed that in FFT, beyond filter size 11, the number of locations within the spectra where the smooth spectra were statistically different from its original counterpart increased to 14 and reaches 21 at the filter size 15. However, in SG method, number of statistically different locations were more than those found in the FFT, but the number of locations did not changing drastically. The number of statistically disturbed locations in SG method varied between 16 and 19. The optimum filter size for smoothing the vegetation spectra was found to be 11 in FFT and 9 in SG method.     

Remote sensing of fire severity: assessing the performance of the normalized burn ratio

Several studies have used satellite data to map different levels of fire severity present within burned areas. Increasingly, fire severity has been estimated using a spectral index called the normalized burn ratio (NBR). This letter assesses the performance of the NBR against ideal requirements of a spectral index designed to measure fire severity. According to index theory, the NBR would be optimal for quantifying fire severity if the trajectory in spectral feature space caused by different levels of severity occurred perpendicular to the NBR isolines. We assess how well NBR meets this condition using reflectance data sensed before and shortly after fires in the South African savanna, Australian savanna, Russian Federation boreal forest, and South American tropical forest. Although previous studies report high correlation between fire severity measured in the field- and satellite-derived NBR, our results do not provide evidence that the performance of the NBR is optimal in describing fire severity shortly after fire occurrence. Spectral displacements due to burning occur in numerous directions relative to the NBR index isolines, suggesting that the NBR may not be primarily and consistently sensitive to fire severity. Findings suggest that the development of the next generation of methods to estimate fire severity remotely should incorporate knowledge of how fires of different severity displace the position of prefire vegetation in multispectral space.     

基于ArcEngine的林火监测云图坐标转换及配准功能的研发

采用二次开发语言VB,通过基于ArcEngine的组件开发模式,对林火监测云图进行配准及坐标转换,使其能够与基础地理信息数据叠加显示,准确判断火点的属地信息等相关地理信息以及相关防火、扑火信息,并且可以依托地理信息系统对火点信息进行管理。使林火监测云图与地理信息系统高度融合,增加了地理信息系统数据的来源,提高了云图的使用效率。最终促进了森林防火工作的信息化和现代化。     

Using cumulative NOAA-AVHRR spectral indices for estimating fire danger codes in northern boreal forests

In Canada, fire danger is rated by the Canadian forest fire danger rating system (CFFDRS). One of its components is the fire weather index (FWI) system, which has among others the drought code (DC). DC is used here as a surrogate of dead forest fuel moisture. DC values were computed from weather data acquired between 1993 and 1999 and compared to 10-day composite NOAA-AVHRR images acquired over Canadian northern boreal forests. They were yearly correlated with single compositing period and cumulative NDVI and surface temperature (ST) NOAA-AVHRR data. Correlations with cumulative spectral variables were stronger than with single compositing period variables and the best correlations occurred for the spring compositing periods (R between 0.57 and 0.80). Spring DC models using both single compositing period and cumulative spectral variables were established. Surface temperature-based indices were more often used in the models than NDVI-based indices. The models were stronger for dry or normal years than for wet years. Limitations and possible improvements of the models are discussed.     

Predicting forest fire in the Brazilian Amazon using MODIS imagery and artificial neural networks

The presented work describes a methodology that employs artificial neural networks (ANN) and multi-temporal imagery from the MODIS/Terra-Aqua sensors to detect areas of high risk of forest fire in the Brazilian Amazon. The hypothesis of this work is that due to characteristic land use and land cover change dynamics in the Amazon forest, forest areas likely to be burned can be separated from other land targets. A study case was carried out in three municipalities located in northern Mato Grosso State, Brazilian Amazon. Feedforward ANNs, with different architectures, were trained with a backpropagation algorithm, taking as inputs the NDVI values calculated from MODIS imagery acquired during five different periods preceding the 2005 fire season. Selected samples were extracted from areas where forest fires were detected in 2005 and from other non-burned forest and agricultural areas. These samples were used to train, validate and test the ANN. The results achieved a mean squared error of 0.07. In addition, the model was simulated for an entire municipality and its results were compared with hotspots detected by the MODIS sensor during the year. A histogram analysis showed that the spatial distribution of the areas with fire risk were consistent with the fire events observed from June to December 2005. The ANN model allowed a fast and relatively precise method to predict forest fire events in the studied area. Hence, it offers an excellent alternative for supporting forest fire prevention policies, and in assisting the assessment of burned areas, reducing the uncertainty involved in currently used methods.     

Spectral reflectance patterns and seasonal dynamics of common understory types in three mature hemi-boreal forests

Due to the growing demand on more accurate prediction of biophysical properties (e.g., leaf area index) or carbon balance models based on remotely sensed data, the understory effect needs to be separated from the overstory. Reflectance models can provide possibility to model and retrieve understory reflectance over large scales, but ground truth data is needed to validate such models and algorithms. In this study, we documented the seasonal variation (April–September) and spectral changes occurring in understory layers of a typical European hemi-boreal forest. The understory composition was recorded and its spectra measured with an ASD FieldSpec Hand-Held UV/VNIR Spectroradiometer eight times at four site types during the growing period (from May to September) in 2013. The collected dataset presented within this study would be of much use to improve and validate algorithms or models for extracting spectral properties of understory from remote sensing data. It can be also further used as a valuable input in radiative transfer simulations that are used to quantify the roles of forest tree layer and understory components in forming a seasonal reflectance course of a hemi-boreal forest, and the upcoming phases of the RAdiation Model Intercomparison (RAMI) experiment.     

Satellite data and geographic information systems for fire and resource management in the Canadian arctic

Abstract

A method of analyzing remotely sensed data, a geographic information system, and an intelligent fire management system have been developed to provide integrated resource data for fire and other resources management. Natural and cultural features were digitized from 1:50,000 topographic maps using a geographic information system (GIS) to cover the 29 communities below the tree line in the western Canadian Arctic. Landsat Thematic Mapper data covering the same area were classified into land cover or fuel types. Detailed information on each fire such as location, area burned, date of discovery, fire number, fire zone, fire class and source of ignition was obtained and added to each map sheet as attribute data. A generalized vegetation cover map using NOAA AVHRR data was also obtained. The Intelligent Fire Management Information System (IFMIS) integrates relational data bases, geographic information display, and expert systems. It also has a spatial analysis procedure for forest fire preparedness planning. Linking the weather to the forest fuels through the Fire Weather Index system (FWI) and the Fire Behaviour Prediction System (FBPS), fire danger and fire behaviour are calculated and displayed, cell‐by‐cell. Values‐at‐risk and fire suppression resources are used in the dispatching and planning component of the system. The planning component allows the user to evaluate the coverage of fire suppression resources under the prevalent forecast fire behaviour conditions. Through the integration of data from the above systems, a set of maps were created which were used to analyze fire behaviour potential, identify fire hazards, and provide a basis for settlement protection strategies within the context of other land use activities such as wildlife harvesting and recreational activities.     

Analyzing CO2 concentration changes and their influencing factors in Indonesia by OCO-2 and other multi-sensor remote-sensing data

We used OCO-2 products and considered three factors that potentially affect CO₂ concentration in Indonesia: sea surface temperature (SST), forest fires and vegetation. From 2014 to 2016, CO₂ concentration in Indonesia showed a trend of increase, which is consistent with the global increase reported by the Greenhouse Gases Observing Satellite (GOSAT) Project. As an archipelago country, the results indicate that SST has a direct effect on the CO₂ concentration in Indonesia. Their changing exhibits similar fluctuations; meanwhile, CO₂ concentration and SST also presented positive correlation. In 2015, the number of fire hotspots suddenly increased to 140,699, because of occurrence of the worst forest fire. Due to special geographic conditions, forest fires did not induce CO₂ concentration changes in Indonesia, but CO₂ concentration in the corresponding islands showed a trend of increase. CO₂ concentration increased in Kalimantan during the occurrence of forest fire in September–October 2014, and CO₂ concentration increased in Kalimantan and Sumatra during the occurrence of forest fire in September–October 2015. Vegetation indices were stable and presented no correlation with CO₂ concentration. This study demonstrated that OCO-2 is capable of monitoring CO₂ concentration at a regional scale; additionally, an effective method for using OCO-2 Level 2 products is proposed.     

测绘地理信息智能化监测在森林防灭火工作中的应用

针对目前森林防灭火事前、事中和事后的监测需求,本文综合利用测绘地理信息技术,构建了测绘地理信息服务森林防灭火的综合性智能化监测技术体系。通过获取多源地理信息数据,构建森林防灭火数据库,面向日常防灭火能力评估、灾前常态化监测、灾中动态监测、灾后评估及灾后长期植被恢复监测,提供了一系列的智能化监测服务。通过在小珠山森林火灾中的实践检验了该体系的实用性,结果显示该监测体系可以为森林防灭火工作提供可靠、精准的智能化地理信息解决方案。