Crustal heat transfer in the Taupo Volcanic Zone (New Zealand): comparison with other volcanic arcs and explanatory heat source models

The Taupo Volcanic Zone (TVZ) is a 200-km-long volcanic arc segment which developed ≤2 Ma ago within the continental crust of the North Island of New Zealand and lies at the southern end of the much larger Tonga-Kermadec arc system. The total crustal heat transfer of the TVZ is at present c. 2600 MW/100 km, most of the heat being transferred by convective geothermal systems. The rate of transfer is anomalously high in comparison to that of other active arcs, and arguably the highest world wide for such a setting. Heat transfer of other active arcs appear to vary almost linearly with subduction speed (about 150 MW/100 km for 10 mm/yr). The mass rate of common type arc extrusions (basalts, andesites, dacites) also increases almost linearly with subduction speed. This allows separation of the TVZ heat transfer into a “normal” component, associated with extrusions and intrusions of andesites and dacites (about 600 MW/100 km), and an “anomalous” component of about 2000 MW/100 km, related to extrusions and intrusions of rhyolitic melts whose generation is not directly controlled by subduction processes.Rhyolitic melts in the TVZ are partial melts of dominantly crustal origin. Comparison with other arcs indicates that the long-term extrusion rate of TVZ rhyolites (about 400 kg/s per 100 km) is also the highest world wide for this setting. The occurrence of voluminous Quaternary rhyolitic pyroclastics is a rare phenomenon and appears to be associated with a few arc segments (TVZ, Sumatra, Kyushu) that undergo significant crustal deformation.Various models have been proposed to explain the phenomenon of the anomalously high heat transfer within the TVZ. Models which require only heat transfer from plumes and subcrustal melts, either ponded at the crust/mantle boundary or intruding a spreading crust, are not suitable because the associated heat transfer at the contact is too low by a factor 2 to explain the required transfer rate of about 0.8 W/m² representing the “anomalous” crustal heat component of the TVZ. Heat generation by focussed plastic deformation within the ductile lithosphere is an alternative mechanism to explain “endogenous crustal heating” which yields heating rates that are also too low by a factor of two, although important parameters (average yield strength of lithosphere and opening rate of the TVZ) are not well known. A further search for a suitable combination of heat source models is required.     

帕米尔北缘弧形推覆构造带东段的基本特征与现代地震活动

帕米尔北缘弧形推覆构造带东段由强烈活动的艾卡尔特弧形活动褶皱－逆断裂带与卡兹克阿尔特弧形活动褶皱－逆断裂带南、北两条巨型边缘弧形构造带及其间的推覆构造构成。每个弧形带分别由多个不同级别的、相对独立的次级弧形构造组成。每个弧形构造实际上就是一个独立的逆冲推覆席体，都有其各自独特的几何学、运动学、动力学特征，但同时又具有自相似性特征。独立地震破裂区或形变带与独立活动的弧形推覆构造可能具有一定的对应关系     

西构造结—帕米尔及周边深部结构与构造探榷

帕米尔高原是五大山脉汇结之中心,被称为"西构造结".在此山高耸谷陡深是人迹罕至的无人区.应用稀少的地面重力和人工地震数据和卫星重力资料,以NNW和NEE向两条长达1620 km的十字交叉剖面,对帕米尔高原地区地壳深部结构与区域地质构造进行了研讨.帕米尔高原中心地区地壳厚度(莫霍界面深度)接近70 km,并在总体上呈向四周逐渐延展减薄(变浅)的总趋势,到帕米尔的周边地区减薄为50余km左右.这里是一个壳幔结构变异的构造强烈活动地域.     

The petrology and geochemistry of volcanic rocks from the Northern Harşit river area, Pontid Volcanic Province, Northeast Turkey

Two volcanic cycles can be distinguished, in the Pontid magmatic arc. They comprise an Upper Cretaceous, Lower Volcanic Cycle of which only the waning stage contains abundant pyroclastic rocks. The latter show spatial association to the fault pattern and are closely related to mineralisation. The overlying, early Tertiary, Upper Volcanic Cycle shows evidence of explosive vulcanicity in the Upper Basic Series. Dacites and rhyodacites are only locally developed and again show spatial association with the faulting.Comparison of the major and minor element chemistries of the two cycles demonstrates the clear separation into a lower tholeiitic and an upper calc-alkaline cycle. The rocks show similar chemistry to volcanic suites from island arcs in other areas.The origin of the tholeiitic magma is ascribed to melting of “dry” amphibolite during early subduction of Tethyan ocean floor beneath “Pontian Land”. This resulted in low K abundances and K/Rb ratios, and some Fe enrichment in the tholeiitic basalts.The calc-alkaline magma is thought to be derived from a later stage in the subduction process when melting of amphibole was joined by melting of biotite or phlogopite. The Upper Volcanic Cycle is thus enriched in K and shows no Fe enrichment due to a probable higher water content. The higher Cr and Ni contents of the Upper Volcanic Cycle, together with K, may imply some melting of lherzolite overlying the subducted slab.     

A Jurassic-Cretaceous island arc in the Ladakh-Himalayas

The Ladakh Mesozoic ophiolite belt (western Himalaya) contains a pile of volcanic thrust sheets (Dras unit) which differ significantly in structure and composition from the ophiolitic mélange zones. The Dras unit is composed of pillow lavas, doleritic sills, very irregular basaltic (?basaltic andesites) and dacitic flows intercalated with pyroclastics, volcanoclastic sediments and radiolarian cherts. According to fossil evidence, this volcanism must have been active between Upper Jurassic and Upper Cretaceous.The presence of relict primary minerals, such as magnesiochromite, clinopyroxene, hastingsitic hornblende and Ti-magnetite as well as distinctive bulk chemistries, suggests that the volcanics belong to island arc tholeiite and to calc-alkaline rock series, typical of present island arcs in the Caribbean and Pacific.Model calculations incorporating probed phenocryst phases indicate that in addition to olivine, clinopyroxene and plagioclase, amphibole and titanomagnetite are crucial fractionating phases in the development of the dacites from a primitive tholeiitic melt. The latter process must have taken place at about 1000°C and at moderate depth of 5–15 km within or underneath the island arc. Today, hornblende-bearing mafic cumulates appear in the vicinity of Kargil within and close to the Dras volcanics.In a Sr-evolution diagram, the Dras volcanics have yielded a “pseudo-isochron” with a low initial ratio of 0.7035 ± 0.0003, which is in the same range as the mean of modern island arc volcanics. However, a geologically unrealistic age of 263 m.y., is obtained from the slope of this isochron.The upper mantle is regarded as the source material for the island arc tholeiitic magmas. Enrichment in K, Ba, Sr and LREE supports the involvement of components derived from dehydration or incipient melting of subducted Tethyan oceanic crust in the mantle.     

Implications of island arc rotations to the studies of marginal terranes

Paleomagnetic studies of rocks from the Bonin and Mariana Island arcs indicate that these island arcs have undergone substantial rotation and northward translation since their formation 40 to 45 Ma. These rotations are inconsistent with existing models of marginal basin and island arc formation. The data presently available suggest to us that the Mariana and Bonin island arcs rotated as one tectonic element at the margin of the Philippine Sea and Pacific plate. These observations demonstrate that large vertical axis rotations are present in the island arc environment, prior to any interaction with a continental landmass. Since many circum-Pacific marginal terranes have been assigned island arc origins, these pre-accretion rotations should be considered when interpreting paleomagnetic results for possible microplate reconstructions. Knowledge of the structural and rotational styles of oceanic pre-accretionary deformations may prove useful for separating these pre-accretion effects from those imposed by the accretionary process in future studies aimed at deciphering the geologic history of island arc marginal terranes.     

Stress field in the western Himalaya with special reference to the 8 October 2005 Muzaffarabad earthquake

The Muzaffarabad region in western Himalaya, the site of the devastating earthquake of 8 October 2005 of magnitude 7.6, occupies a unique tectonic position, encompassed by the Himalayan arc to the east and the complex thrust zones of Pamir and Hindukush in the north and northwest respectively. Further, the region is entangled in a peculiar overturned syntaxial bend of the Main Central Thrust (MCT), north of Main Boundary Thrust (MBT). A study of focal mechanisms and stress inversion in each of these regions indicates varied stress regimes demonstrating their distinct tectonic character. While shallow plane thrust faulting with low dip angles is generally witnessed along the Himalayan arc, a transition to steep fault plane dips up to 45° is seen in the Muzaffarabad region on the western side. It is inferred that the stress field in Muzaffarabad region is not a mere extension of that in the Himalayan arc but is controlled by the complex interplay of the surrounding diverse tectonic structural units comprising the Himalaya, Hindukush and Pamir, rather than merely the tectonic forces of India–Eurasia collision.     

Geodynamic processes of the continental deep subduction: Constraints from the fine crustal structure beneath the Pamir plateau

The Pamir plateau, located north of the western syntaxis of the India-Eurasia collision system, is regarded as one of the most possible places of the ongoing continental deep subduction. Based on a N-S trending linear seismic array across the Pamir plateau, we use the methods of the harmonic analysis of receiver functions and the cubic spline interpolation of surface wave dispersions to coordinate their resolutions, and perform a joint inversion of these datasets to construct a 2-D S-wave velocity model of the crust and uppermost mantle there. A spatial configuration among the intermediate-depth seismicity, Moho topography, and low-velocity anomalies within the crust and upper mantle is revealed, which provides new seismological constraints on the geodynamic processes of the continental subduction. These results not only further confirm the deep subduction of the Asian continental lower crust beneath the Pamir plateau, but also indicate the importance of the metamorphic dehydration of the subducting continental crustal material in the genesis of the intermediate-depth seismicity and the crustal deformation.     

Trace-element and isotopic constraints on the source of magmas in the active volcano and Mariana island arcs, Western Pacific

Analytical results of the relative and absolute abundance of LIL-incompatible trace elements (K, Rb, Cs, Sr, and Ba) and isotopic compositions ( , , and ) are summarized for fresh samples from active and dormant volcanoes of the Volcano and Mariana island arcs. The presence of thickened oceanic crust (T 15–20 km) beneath the arc indicates that while hybridization processes resulting in the modification of primitive magmas by anatectic mixing at shallow crustal levels cannot be neglected, the extent and effects of these processes on this arc's magmas are minimized. All components of the subducted plate disappear at the trench. This observation is used to reconstruct the composition of the crust in the Wadati-Benioff zone by estimating proportions of various lithologies in the crust of the subducted plate coupled with analyses from DSDP sites. Over 90% of the mass of the subducted crust consists of basaltic Layers II and III. Sediments and seamounts, containing the bulk of the incompatible elements, make up the rest. Bulk Western Pacific seafloor has , δ ¹⁸O +7.2, K/Rb 510, K/Ba 46, and K/Cs 13,500. Consideration of trace-element data and combined systematics limits the participation of sediments in magmagenesis to less than 1%, in accord with the earlier results of Pb-isotopic studies. Combined data indicate little, if any, involvement of altered basaltic seafloor in magmagenesis. Perhaps more important than mean isotopic and LIL-element ratios is the restricted range for lavas from along over 1000 km of this arc. Mixtures of mantle with either the subducted crust or derivative fluids should result in strong heterogeneities in the sources of individual volcanoes along the arc. Such heterogeneities would be due to: (1) gross variations of crustal materials supplied to the subduction zone; and (2) lesser efficiency of mixing processes accompanying induced convection between arc segments (parallel to the arc) as compared to that perpendicular to the arc. The absence of these heterogeneities indicates that either some process exists for the efficient mixing of mantle and subducted material parallel to the arc or that subducted materials play a negligible role in the generation of Mariana-Volcano arc melts.Consideration of plausible sources in the mantle indicates that (1) an unmodified MORB-like mantle cannot have generated the observed trace-element and isotopic composition of this arc's magmas, while (2) a mantle similar to that which has produced alkali-olivine basalts (AOB) of north Pacific “hot spot” chains is indistinguishable in many respects spects from the source of these arc lavas.     

Geophysical modeling of the northern Appalachian Brompton-Cameron, Central Maine, and Avalon terranes under the New Jersey Coastal Plain

A regional terrane map of the New Jersey Coastal Plain basement was constructed using seismic, drilling, gravity and magnetic data. The Brompton-Cameron and Central Maine terranes were coalesced as one volcanic island arc terrane before obducting onto Laurentian, Grenville age, continental crust in the Taconian orogeny [Rankin, D.W., 1994. Continental margin of the eastern United States: past and present. In: Speed, R.C., (Ed.), Phanerozoic Evolution of North American Continent-Ocean Transitions. DNAG Continent-Ocean Transect Volume. Geological Society of America, Boulder, Colorado, pp. 129–218]. Volcanic island-arc rocks of the Avalon terrane are in contact with Central Maine terrane rocks in southern Connecticut where the latter are overthrust onto the Brompton-Cameron terrane, which is thrust over Laurentian basement. Similarities of these allochthonous island arc terranes (Brompton-Cameron, Central Maine, Avalon) in lithology, fauna and age suggest that they are faulted segments of the margin of one major late Precambrian to early Paleozoic, high latitude peri-Gondwana island arc designated as “Avalonia”, which collided with Laurentia in the early to middle Paleozoic. The Brompton Cameron, Central Maine, and Avalon terranes are projected as the basement under the eastern New Jersey Coastal Plain based on drill core samples of metamorphic rocks of active margin/magmatic arc origin. A seismic reflection profile across the New York Bight traces the gentle dipping (approximately 20 degrees) Cameron's Line Taconian suture southeast beneath allochthonous Avalon and other terranes to a 4 sec TWTT depth (approximately 9 km) where the Avalonian rocks are over Laurentian crust. Gentle up-plunge (approximately 5 degrees) projections to the southwest bring the Laurentian Grenville age basement and the drift-stage early Paleozoic cover rocks to windows in Burlington Co. at approximately 1 km depth and Cape May Co. at approximately 2 km depths. The antiformal Shellburne Falls and Chester domes and Chain Lakes-Pelham dome-Bronson Hill structural trends, and the synformal Connecticut Valley-Gaspe structural trend can be traced southwest into the New Jersey Coastal Plain basement. A Mesozoic rift basin, the “Sandy Hook basin”, and associated eastern boundary fault is identified, based upon gravity modeling, in the vicinity of Sandy Hook, New Jersey. The thickness of the rift-basin sedimentary rocks contained within the “Sandy Hook basin” is approximately 4.7 km, with the basin extending offshore to the east of the New Jersey coast. Gravity modeling indicates a deep rift basin and the magnetic data indicates a shallow magnetic basement caused by magnetic diabase sills and/or basalt flows contained within the rift-basin sedimentary rocks. The igneous sills and/or flows may be the eastward continuation of the Watchung and Palisades bodies.     

DETRITAL ZIRCON U-PB DATING OF MODERN RIVERS' DEPOSITS IN PAMIR,SOUTH TIAN SHAN AND THEIR CONVERGENCE ZONE

By dating detrital zircon U-Pb ages of deposition sequence in foreland basins, we can analyze the provenance of these zircons and further infer the tectonic history of the mountain belts. This is a new direction of the zircon U-Pb chronology. The precondition of using this method is that we have to have all-around understanding to the U-Pb ages of the rocks of the orogenic belts, while the varied topography, high altitude of the zircon U-Pb ages of the orogenic belts are very rare and uneven. This restricts the application of this method. Modern river deposits contain abundant geologic information of their provenances, so we can probe the zircon U-Pb ages of the geological bodies in the provenances by dating the detrital zircon U-Pb ages of modern rivers' deposits. We collected modern river deposits of 14 main rivers draining from Pamir, South Tian Shan and their convergence zone and conducted detrital zircon U-Pb dating. Combining with the massive bed rock zircon U-Pb ages of the magmatic rocks and the detrital zircon U-Pb ages of the modern fluvial deposit of other authors, we obtained the distribution characteristics of zircon U-Pb ages of different tectonic blocks of Pamir and South Tian Shan. Overlaying on the regional geological map, we pointed out the specific provenance geological bodies of different U-Pb age populations and speculated the existence of some new geological bodies. The results show that different tectonic blocks have different age peaks. The main age peaks of South Tian Shan are 270~289Ma and 428~449Ma, that of North Pamir are 205~224Ma and 448~477Ma, Central Pamir 36~40Ma, and South Pamir 80~82Ma and 102~106Ma. The Pamir syntaxis locates at the west end of the India-Eurasia collision zone. The northern boundary of the Pamir is the Main Pamir Thrust(MPT)and the Pamir Front Thrust(PFT). In the Cenozoic, because of the squeezing action of the India Plate, the Pamir thrust a lot toward the north and the internal terranes of the Pamir strongly uplifted. For the far-field effect of the India-Eurasia collision, the Tian Shan on the north margin of the Tarim Basin also uplifted intensely during this period. Extensive exhumation went along with these upliftings. The material of the exhumation was transported to the foreland basin by rivers, which formed the very thick Cenozoic deposition sequence. These age peaks can be used as characteristic ages to recognize these tectonic blocks. These results lay a solid foundation for tracing the convergence process of Pamir and South Tian Shan in Cenozoic with the help of detrital zircon U-Pb ages of sediments in the foreland basin.     

Curvature of convergent boundaries

Abstract It is well known that knowledge about convergent boundary geometry is crucial for global geodynamical reconstructions. At the same time, views related to the subject are controversial and speculative. For instance, island arcs, which are considered to be the most important convergent boundary structural elements, are thought to be either the parts of the small circles on the Earth's surface, or adjacent to each other as straight-line segments. Accordingly, one view says that island arcs are rectilinear rather than arched, and there are no reasons to consider their arched shape to be a rule. Is the island arc curvature invariant in time and space? General considerations, palaeomagnetic data and structural features such as strike-slip displacements of the opposite sign along the longitudinal faults on the island arc flanks, prompt the author to have a similar view to others, that is, that island arc curvature varies with time. It is worthy to note, nevertheless, that this statement could hardly be referred to as generally adopted, and it is not necessarily true. One can try to answer the second part of the question by means of mathematical statistics. Points of an island arc characterizing the geometry, such as volcanic centres or deep-trench axial line points, were led to the stereographical projection centre, where distortions are minimal. By the least squares method these points have been approximated with straight lines, circumferences and lines with variable curvature. Then by means of variance analysis the competing hypotheses have been compared. The results of the present study show that the curvature of the island arcs in the north-western Pacific varies with location. It is possible to search for relationships between island arc curvature as a measure of its bending, various physical parameters of island arc lithosphere and such recent island arc processes as volcanism, seismicity etc. Progress in this direction has already been made; namely a direct relationship between trench depth and island arc curvature has been established.     

Kinematic setting and structural control of arc volcanism

The evaluation of the kinematic setting and the structural control of volcanic arcs are important in defining the tectono-magmatic processes along convergent plate boundaries. However, our knowledge is fragmented and the available data highlight different behaviours. This study analyzes the kinematic setting, the structural control and the volcanic productivity of 16 arcs. These arcs are characterized by predominant extensional, compressional, strike–slip or oblique motions. There is an overall coupling between the normal vs. parallel motions along the arc and those of the underlying slab. Therefore, the higher the trench-normal (or parallel) component of the subduction rate, the higher is the amount of arc-normal (or parallel) motion. This relation confirms that strain partitioning is, in general, feasible at many convergent settings, involving also the volcanic arc portion. The arc-normal motion may be characterized by extension or compression, as a function of the increase in the trench-normal convergence (or subduction) velocity. The lack of an evident relation between the subduction rate (or convergence rate) and the volcanic productivity of the arc is partly inconsistent with previous studies, which highlight a relation between the subduction rate and melt production below arcs. This discrepancy mainly suggests that different processes control the generation, rise and eruption of magma at different depths, varying the intrusive/extrusive ratio along arcs. The structure of the arc does not control the distribution of the volcanoes; however, it does control the volcanic output through different processes, even though regional or local extension (associated with strike–slip or compressive structures) is the ultimate requisite, in any setting. In general, the higher the amount of extension, the higher is the output rate along the arc.     

2008年新疆乌恰6.8级地震序列震源特征及帕米尔东北缘应力场研究

本文使用新疆区域数字地震台站记录的宽频带长周期数字波形资料,在时间域反演了2008年10月5日新疆乌恰6.8级地震的强余震及其周围先后发生的52次中等强度地震的矩张量解,结合Harvard大学在该区域的地震矩张量结果,研究了帕米尔东北缘的应力场分区特征.研究结果显示,位于印度板块向欧亚板块推挤的前缘及向北凸出的弧型构造的最北缘的卡兹克阿尔特弧形活动褶皱-逆断裂带,以逆冲推覆活动为主,并有部分走滑类型的地震,基本不存在正断层类型的地震;该弧型构造近东西走向的顶部(文中的西区)与其北西走向的东侧(文中的东区)的局部应力场最大主压应力方向不同,分别为NW、NNE方向,显示出在承受印度板块向欧亚板块俯冲作用的同时,东区也更多的受到了塔里木块体顺时针旋转作用的影响.位于帕米尔陆内俯冲和变形作用强烈、碰撞造成深源地震带东段的南区,地震以走滑错动为主, 逆断、正断层都有,显示出相对复杂的应力状态.位于帕米尔高原内部的西区和南区的应力场最大主压应力方向一致,由北向南,由最大主压应力轴接近水平,过渡为最大主张应力轴接近水平,一定程度揭示了板块俯冲的状态.结合南区和西区的地震深度差异及机制解中断层面的倾角,推测在中帕米尔的东部,由北向南的板块俯冲至150~170km深度,俯冲角度为60°左右.     

Origin of the Kunlun Mountains by arc-arc and arc-continent collisions

Abstract The Kunlun Mountains were formed by early Mesozoic arc-arc and arc-continent collisions. The Middle Kunlun Are was the outer volcanic arc of the Paleozoic Asiatic continent, and the arc-related magmatic activities from the Proterozoic to Mesozoic are recorded by numerous volcanic and plutonic rocks of the area. Several back-arc basins and relic arcs exist north of the arc and the north Kunlun arc is one of these. The Kudi mélange of Kunlun was formed in a south-dipping subduction zone when the basin between the north and middle Kunlun arcs was consumed by the process of back-arc basin collapse, and the ophiolite mélange marked the suture zone where the two arcs collided. The Mazar mélange was formed in the north-dipping subduction zone under the middle Kunlun arc, and the mélange marks the main Paleotethys suture where the Qogir-Karamilan rocks of the Qangtang block (a fragment of Gondwanaland) is sutured on to Laurentia. The geology of Kunlun emphasizes the importance of arc-arc and arc-continent collisions in mountain-building processes.     

Circular geomorphologic and geological features in the Japanese islands

The available geomorphologic, geological, geophysical, and paleogeographic data were used to identify and reconstruct, to varying degrees of accuracy, dome-block and tectono-magmatic circular uplifts within the Japanese island arc, which contain the main mountain massifs and the centers of orogenic granitoid magmatism on Kyushu, Honshu, Shikoku, and Hokkaido islands. By analogy with the magmatic domes of mountain features in the adjacent continental land (Sikhote-Alin’), they are identified with Cretaceous/Paleogene granitoid focus systems of regional rank. It was found that these elements of the structural setting have preserved their significance up to the present, in spite of the fact that destructive tectonogenetic tendencies have been dominant since the Late Oligocene/Miocene. We also hypothesize that relicts of a major dome-block feature (Nampo) exist within the northern Philippine Sea. The local circular features on these islands reflect the entire diversity of focus formations at volcanic arcs and in the volcano-plutonic belts at active continental margins. Our study showed that the morphotectonic base of the Japanese Islands is not a chaotic collage of terranes, but rather a consolidated system of Cretaceous/Paleogene central-type orogenic uplifts that are evolving in an inherited manner with superimposed Late Cenozoic magmatic, block, and fault features. The Japanese Islands contain an abundance of circular features of varying ranks and ages, indicating the essential control of deep injected dislocations and of the magmatic factor in the structure and evolution of the region.     

Magma rates in feeding conduits of different volcanic centres

A quasi-stationary magma flow rate in asthenospheric and crustal conduits of central type volcanoes and volcanic centres was studied analytically under the following conditions. Magma rises through cylindrical channels in which the magma temperature does not change with time, but the wall rocks are gradually heated. The magma rates were calculated for basaltic, andesitic and dacitic volcanoes using the “continental” and “oceanic” geotherms. It follows from these calculations that the magma supply rate may determine the kind of activity of a volcanic centre, being constant for large and very active volcanoes, intermittent for usual volcanic centres of island arcs or sporadic for volcamic fields, clusters of cinder cones and areal volcanism. Theoretical conclusions are consistent with observational data.     

Tephrochronology of the Kamchatka–Kurile and Aleutian arcs: evidence for volcanic episodicity

Volcanic ash layers in North Pacific deep-sea sediment provide a record of episodic explosive volcanism in the Kamchatka–Kurile and Aleutian arcs over the past five million years. We counted 450 ash layers, determined layer thickness and cumulative ash thickness to quantify the flux of ash with time. We use this record to investigate the eruptive history of these arcs, test the reliability of the marine ash record, and inquire into the regional episodicity of North Pacific explosive volcanic history. Episodes of explosive volcanism occurred at approximately 0.2–0.5, 0.7–0.9, 1.5–1.7, and 2.5–2.65 Ma in the Kamchatka arc and 0.15–0.4, 1.7–1.8, 2.55–2.65, and at 3.0–3.1 Ma in the eastern Aleutian arc. These generally coeval eruptive episodes suggest that the pulses in explosive volcanism in the North Pacific enumerated here and recognized by others are regionally episodic over a wide portion of the Pacific rim and not just a response to local volcanogenic processes.     

Luminosity variations in several parallel auroral arcs before auroral breakup

Variation of the luminosity in two parallel auroral arcs before auroral breakup has been studied by using digitised TV-data with high temporal and spatial resolution. The intervals when a new arc appears near already existing one were chosen for analysis. It is shown, for all cases, that the appearance of a new arc is accompanied by fading or disappearance of another arc. We have named these events out-of-phase events, OP. Another type of luminosity variation is characterised by almost simultaneous enhancement of intensity in the both arcs (in-phase event, IP). The characteristic time of IP events is 10–20 s, whereas OP events last about one minute. Sometimes out-of-phase events begin as IP events. The possible mechanisms for OP and IP events are discussed.     

Seismotectonics of the Himalaya and its vicinity from centroid-moment tensor (CMT) solution of earthquakes

The centroid-moment tensor solutions of more than 300 earthquakes that occurred in the Himalayas and its vicinity regions during the period of 1977–1996 are examined. The resultant seismic moment tensor components of these earthquakes are estimated. The Burmese arc region shows prominent east–west compression and north–south extension with very little vertical extension. Northeast India and Pamir–Hindu Kush regions show prominent vertical extension and east–west compression. The Indian plate is subducting eastward beneath the northeast India and Burmese arc regions. The overriding Burmese arc has overthrust horizontally with the underthrusting Indian plate at a depth of 20–80 km and below 80 km depth, it has merged with the Indian plate making “Y” shape structure and as a result the aseismic zone has been formed in the region lying between 26°N–28°N and 91.5°E–94°E at a depth of 10–50 km. Similarly, the Indian plate is underthrusting in the western side beneath the Pamir–Hindu Kush region and the overriding Eurasian plate has overthrust it to form a “Y” shape structure at a depth of 10–40 km and below 60 km depth, it has merged with the Indian plate and both the plates are subducting below 60–260 km depth. Further south, the overriding Eurasian plate has come in contact with the Indian plate at a depth of 20–60 km beneath northwest India and Pakistan regions with left lateral strike slip motion.