Acid mine drainage at Cerro Rico de Potosí II: severe degradation of the Upper Rio Pilcomayo watershed

Ag, Pb, Sn and Zn ores have been intensively mined and processed at Cerro Rico de Potosí, Bolivia since 1545. Acid mine drainage (AMD) and mineral processing plant effluent are prime sources of water contamination in the headwaters of the Upper Rio Pilcomayo watershed. Streams receiving AMD drainage from the slopes of Cerro Rico and surrounding landscapes were sampled during the dry (July–August 2006) and wet (March 2007) seasons of one water-year. In-stream waters contained total metal concentrations of up to 16 mg/L As, 4.9 mg/L Cd, 0.97 mg/L Co, 1,100 mg/L Fe, 110 mg/L Mn, 4.1 mg/L Pb, and 1,500 mg/L Zn with pH ranging from 2.8 to 9.5. AMD-impacted streams contained elevated concentrations of the same major ecotoxic constituents present in AMD discharges at concentrations orders of magnitude greater than in those streams unimpacted by AMD. Many of the AMD impacted water bodies are more degraded than class “D” of the Bolivian receiving water body criteria, rendering them unfit for domestic or agricultural use. Natural attenuation is insufficient to render waters safe for use, however, some of these waters are currently being utilized for irrigation and livestock watering. The data indicate that historic and current mining activities have transformed these key natural resources into potential human and environmental health hazards.     

Heavy metal geochemistry of the acid mine drainage discharged from the Hejiacun uranium mine in central Hunan,China

The acid mine drainage (AMD) discharged from the Hejiacun uranium mine in central Hunan (China) was sampled and analyzed using ICP-MS techniques. The analyzing results show that the AMD is characterized by the major ions Fe_Total, Mn, Al and Si, and is concentrated with heavy metals and metalloids including Cd, Co, Ni, Zn, U, Cu, Pb, Tl, V, Cr, Se, As and Sb. During the AMD flowing downstream, the dissolved heavy metals were removed from the AMD waters through adsorption onto and co-precipitation with metal-oxhydroxides coated on the streambed. Among these metals, Cd, Co, Ni, Zn, U, Cu, Pb and Tl are negatively correlated to pH values, and positively correlated to major ions Fe, Al, Si, Mn, Mg, Ca and K. The metals/metalloids V, Cr, Se, As and Sb are conservative in the AMD solution, and negatively-correlated to major ions Na, Ca and Mg. Due to the above different behaviors of these chemical elements, the pH-negatively related metals (PM) and the conservative metals (CM) are identified; the PM metals include Cd, Co, Ni, Zn, U, Cu, Pb and Tl, and the CM metals V, Cr, Se, As and Sb. Based on understanding the geochemistry of PM and CM metals in the AMD waters, a new equation: EXT = (Acidity + PM)/pH + CM × pH, is proposed to estimate and evaluate extent of heavy-metal pollution (EXT) of AMD. The evaluation results show that the AMD and surface waters of the mine area have high EXT values, and they could be the potential source of heavy-metal contamination of the surrounding environment. Therefore, it is suggested that both the AMD and surface waters should be treated before they are drained out of the mine district, for which the traditional dilution and neutralization methods can be applied to remove the PM metals from the AMD waters, and new techniques through reducing the pH value of the downstream AMD waters should be developed for removal of the CM metals.     

Acid mine drainage at Cerro Rico de Potosí I: unabated high-strength discharges reflect a five century legacy of mining

Intensive mining and processing of Ag, Sn, Pb and Zn ores have occurred in various locations within and around the city of Potosí, Bolivia since 1545. Surface and subsurface waters, stream sediments and soils are contaminated with various ecotoxic metals in the headwaters of the economically vital, yet highly impacted, upper Rio Pilcomayo watershed. Previous studies have documented downstream trace metal contamination, however, not addressed specific sources. The AMD discharges identified in this study help link downstream pollution to primary origins. The majority of AMD would be considered high-strength due to metal concentrations and acidity orders of magnitude greater than typical AMD. Discharges from both operating and abandoned portals as well as tailings-related deposits displayed a high degree of heterogeneity with total metal concentrations ranging from 0.11 to 7480, <0.022 to 889, <0.0006 to 65.3, <0.001 to 310, 0.12 to 72,100, 0.3 to 402, <0.012 to 34.8, and 0.24 to 19,600 mg/L of Al, As, Cd, Cu, Fe, Mn, Pb and Zn, respectively. Net acidity and pH ranged from −10 to 246,000 mg/L as CaCO₃ equivalent and 0.90–6.94 standard units, respectively. Data were gathered during two sampling events centered around the most extreme periods of the dry and wet seasons of one water-year. Loadings to local streams were marginally greater for most metals in the wet season. If observed loadings are historically representative, Cerro Rico AMD has contributed thousands of tonnes of ecotoxic metals to the upper Rio Pilcomayo over the last five centuries. Metal and hydrogen ion concentrations in the majority of AMD sampled were several orders of magnitude above discharge limits set by the Bolivian government, yet no action has historically or contemporarily been taken.     

Integrated geophysical and geochemical study on AMD generation at the Haveri Au–Cu mine tailings,SW Finland

The Haveri tailings area contains 1.5 Mt of sulfide-bearing waste from the Au–Cu mine that operated during 1942–1961. Geophysical and geochemical methods were used to evaluate and characterize the generation of acid mine drainage (AMD). Correlations were examined among the electrical resistivity tomography (ERT) data, the total sulfide content and concentrations of sulfide-bound metals (Cu, Co, Fe, Mn, Ni, Pb and Zn) of tailings samples, and the resistivity and geochemistry of surface water. The resulting geophysical–geochemical model defines an area in the vadose tailings, where a low resistivity anomaly (<10 Ohm m) is correlated with the highest sulfide content, extensive sulfide oxidation and low pH (average 3.1). The physical and geochemical conditions, resulting from the oxidation of the sulfide minerals, suggest that the low resistivity anomaly is associated with acidic and metal-rich porewater (i.e., AMD). The lower resistivity values in the saturated zone of the central impoundment suggest the formation of a plume of AMD. The natural subsoil layer (silt and clay) and the bedrock surface below the tailings area were well mapped from the ERT data. The detected fracture zones of the bedrock that could work as leakage pathways for AMD were consistent with previous geological studies. The integrated methodology of the study offers a promising approach to fast and reliable monitoring of areas of potential AMD generation and its subsurface movement over large areas (ca. 9 ha). This methodology could be helpful in planning drill core sampling locations for geochemical and mineralogical analysis, groundwater sampling, and choosing and monitoring remedial programs.     

Biogeochemical evolution of trace elements in a pristine watershed in the Brazilian southeastern coastal region

Establishing ‘reference sites’ is a difficult task and a critical factor in determining the baseline functioning of ecosystems. The information thus obtained on nutrient and contaminant background concentrations in turn subsidizes the remediation of impacted landscapes. This paper reports a study on metal (Cr, Cu, Pb, Zn, Mn, Fe and Al) and nutrient (C) distribution in sediments from Capivari River watershed (Praia do Sul Biological Reserve, Ilha Grande, Rio de Janeiro State, Brazil), an area where typical SE Brazilian coastal ecosystems are located. Contrary to what one would expect from the high rate at which these ecosystems have been deteriorating in recent decades, the study site is surprisingly well preserved. The present study was developed to assess variations in heavy metal concentrations in river basin sediments, to identify the geochemical carriers of these elements, and determine the influence of water quality and organic matter on their distribution. Results showed that heavy metal distribution has been influenced by the natural biogeochemical properties of those ecosystems found in an upland-to-lowland sequence in the watershed. Minimum and maximum total concentration were: 5 and 23 mg/kg for Cr; 4 and 29 mg/kg for Cu; 13 and 53 mg/kg for Pb; 24 and 142 mg/kg for Zn; 54 and 342 mg/kg for Mn; 0.8 and 7.2% for Fe; 0.5 and 4.9% for Al; 6.3 and 25% for C. The pH and E_H are the key-parameters in explaining total metal concentration decrease in the swamp area, where dissolution processes and losses through metal transport seem important. The most important geochemical carriers are Al in the basin’s “continental” stretch and Fe in the estuarine portion. The data also provide evidence showing that organic matter is the key-parameter in Cu concentration control in the sediments through burial and accumulation processes especially in the swamp area. Heavy metal concentrations in sediments from the study area are generally lower than those found in similar regional ecosystems. Surface enrichment in heavy metal concentrations in collected sediment cores was not observed. The authors therefore conclude that this site is suitable as a ‘reference site’ for studies on the biogeochemistry and ecotoxicology of SE Brazilian coastal ecosystems.     

Migration of Cu, Zn, Cd and As in epikarst water affected by acid mine drainage at a coalfield basin, Xingren, Southwest China

Epikarst water, which is one of the most important water resources in karst mountain areas, is extremely sensitive to mining activities. Acid mine drainage (AMD) with high levels of heavy metals can degrade the water quality. A typical coalfield basin was chosen to research the migration process of heavy metals. It was found that the chemical compositions of the stream water in the research field were controlled by the dissolution of carbonate rocks or/and the weathering and oxidation of pyrite in the mining area. Excluding a few sites in the mining area, As(V) was dominant species of arsenic in the form of H₂AsO₄ ^? or HAsO₄ ^2? in the research field. Based on the mass balance concept, it was found that fluxes of As, Zn, Cu and Cd in water from the mining area (site 17) affected by AMD were 18, 871, 281 and 12 kg year^?1, respectively. Also, concentrations of Cd, Zn, As and Cu in the stream water decreased along the flow, because these ions deposited from the water to the stream bed as the redistribution processes in environment.     

Hydrogeochemical characteristics of acid mine drainage and water pollution at Makum Coalfield,India

Acid mine drainage (AMD) is one of the severe environmental problems that coal mines are facing. Generation of AMD in the northeastern part of India due to the coal mining activities has long been reported. However detailed geochemical characterization of AMD and its impact on water quality of various creeks, river and groundwater in the area has never been reported. Coal and coal measure rocks in the study area show finely disseminated pyrite crystals. Secondary solid phases, resulted due to oxidation of pyrite, occur on the surface of coal, and are mainly consisting of hydrated sulphate complexes of Fe and Mg (copiapite group of minerals). The direct mine discharges are highly acidic (up to pH 2.3) to alkaline (up to pH 7.6) in nature with high concentration of SO₄²⁻. Acidic discharges are highly enriched with Fe, Al, Mn, Ni, Pb and Cd, while Cr, Cu, Zn and Co are below their maximum permissible limit in most mine discharges. Creeks that carrying the direct mine discharges are highly contaminated; whereas major rivers are not much impacted by AMD. Ground water close to the collieries and AMD affected creeks are highly contaminated by Mn, Fe and Pb. Through geochemical modeling, it is inferred that jarosite is stable at pH less than 2.5, schwertmannite at pH less than 4.5, ferrihydrite above 5.8 and goethite is stable over wide range of pH, from highly acidic to alkaline condition.     

Hydrochemical characteristics and seasonal influence on the pollution by acid mine drainage in the Odiel river Basin (SW Spain)

The Odiel river Basin is heavily affected by acid mine drainage (AMD) from the sulphide mining areas in the Iberian Pyrite Belt (IPB). A thorough study has been conducted along this fluvial system, monitoring the seasonal influence on the pollution level and its hydrochemical characteristics. From 2002 to 2006, surface water samples were collected at 91 different points throughout the Odiel river Basin and analyzed by field and laboratory methods for dissolved metals and metalloids. Acid mine drainage affects 37% of the length of the drainage network, which shows a great diversity of geochemical conditions as well as significant variations through the hydrological year. Unaffected streams show different water types depending on the lithological substrate and the marine aerosol influence. Mean concentrations in the contaminated streams are very high: 231 mg/L of Fe, 135 mg/L of Al, 56 mg/L of Zn, 16 mg/L of Cu, etc. Four types of contaminated streams were recognized based on hydrochemical and physicochemical characteristics. There are important seasonal variations depending on the precipitation regimen, level of pollution and proximity to the AMD sources. In the more contaminated samples the M/Fe ratio (M = metals other than Fe) decreases during the summer season. Slightly contaminated samples show an inverse evolution as this ratio increases in spring and summer due to substantial Fe precipitation. A recomparison of contaminant loads suggests that the Odiel river Basin (including the Tinto river) accounts for 15% of the global gross flux of dissolved Zn and 3% of the global gross flux of dissolved Cu transported by rivers into the ocean.     

Effects of copper mining on heavy metal contamination in a rice agrosystem in the Xiaojiang River Basin,southwest China

Metallic ore mining causes heavy metal pollution worldwide. However, the fate of heavy metals in agrosystems with long-term contamination has been poorly studied. Dongchuan District (Yunnan, southwest China), located at the middle reaches of the Xiaojiang River, is a well-known 2000-year-old copper mining site. In this work, a survey on soil heavy metal contents was conducted using a handheld X-ray fluorescence instrument to understand the general contamination of heavy metals in the Xiaojiang River Basin. Furthermore, river water, soil, and rice samples at six sites along the fluvial/alluvial fans of the river were collected and analyzed to implement an environmental assessment and an evaluation of irrigated agrosystem. V, Zn, and Cu soil levels (1724, 1047, and 696 mg·kg⁻¹, respectively) far exceeded background levels. The geo-accumulation indexes (I_geo) showed that cultivated soils near the mining sites were polluted by Cd and Cu, followed by Zn, V, Pb, Cr, Ni, and U. The pollution index (Pi) indicated that rice in the area was heavily polluted with Pb, Cr, Cd, Ni, Zn, and Cu. The difference in orders of metal concentrations between the soil and rice heavy metal contamination was related to the proportion of bioavailable heavy metals in the soil. The crop consumption risk assessment showed that the hazard quotient exceeded the safe threshold, indicating a potential carcinogenic risk to consumers. The Nemerow integrated pollution index and health index indicated that the middle of the river (near the mining area) was the heaviest polluted site.

     

Estimation of potential pollution from mine tailings in the San Pedro River (1993–2005), Mexico–US border

The San Pedro River (SPR) is located in northern Sonora (Mexico) and southeastern Arizona (USA). SPR is a transboundary river that develops along the Sonora (Mexico) and Arizona (USA) border, and is considered the main source of water for a variety of users (human settlements, agriculture, livestock, and industry). The SPR originates in the historic Cananea mining area, which hosts some of the most important copper mineralizations in Mexico. Acid mine drainage derived from mine tailings is currently reaching a tributary of the SPR near Cananea City, resulting in the contamination of the SPR with heavy metals and sulfates in water and sediments. This study documents the accumulation and distribution of heavy metals in surface water along a segment of the SPR from 1993 to 2005. Total concentrations of Cd, Cu, Fe, Mn, Pb, and Zn in surface waters are above maximum permissible levels in sampling sites near mine tailing deposits. Nevertheless, a significant decrease in the Fe and SO₄ ²⁻ in surface water (SO₄ ²⁻: 7,180–460.39 mg/L; Fe: 1,600–9.51 mg/L) as well as a gradual decrease in the heavy and transition metal content were observed during the period from 1994 to 2005. Approximately 2.3 km downstream of the mine tailings, the heavy metal content of the water drops quickly following an increase in pH values due to the discharging of wastewater into the river. The attenuation of the heavy metal content in surface waters is related to stream sediment precipitation (accompanied by metal coprecipitation and sorption) and water dilution. Determining the heavy metal concentration led to the conclusion that the Cananea mining area and the San Pedro River are ecosystems that are impacted by the mining industry and by untreated wastewater discharges arising from the city of Cananea (Sonora, Mexico).     

Prediction of heavy metals in acid mine drainage using artificial neural network from the Shur River of the Sarcheshmeh porphyry copper mine,Southeast Iran

Water is one of the basic and fundamental requirements for the survival of human beings. Mining of the sulphide mines usually produce a significant amount of acid mine drainage (AMD) contributing to huge amounts of chemical components and heavy metals in the receiving waters. Prediction of the heavy metals in the AMD is important in developing any appropriate remediation strategy. This paper attempts to predict heavy metals (Cu, Fe, Mn, Zn) from the AMD using backpropagation neural network (BPNN), general regression neural network (GRNN) and multiple linear regression (MLR), by taking pH, sulphate (SO₄) and magnesium (Mg) concentrations in the AMD into account in Shur River, Sarcheshmeh porphyry copper deposit, southeast Iran. The comparison between the predicted concentrations and the measured data resulted in the correlation coefficients, R, 0.92, 0.22, 0.92 and 0.92 for Cu, Fe, Mn and Zn ions using BPNN method. Moreover, the R values were 0.89, 0.37, 0.9 and 0.91 for Cu, Fe, Mn, and Zn taking the GRNN method into consideration. However, the correlation coefficients were low for the results predicted by MLR method (0.83, 0.14, 0.9 and 0.85 for Cu, Fe, Mn and Zn ions, respectively). The results further indicate that the ANN can be used as a viable method to rapidly and cost-effectively predict heavy metals in the AMD. The results obtained from this paper can be considered as an easy and cost-effective method to monitor groundwater and surface water affected by AMD.     

Lithological and geochemical record of mining-induced changes in sediments from Macquarie Harbour,southwest Tasmania,Australia

Macquarie Harbour in southwest Tasmania, Australia, has been affected severely by the establishment of mines in nearby Queenstown in the 1890s. As well as heavy metal-laden acid rock drainage from the Mount Lyell mine area, over 100 Mt of mine tailings and slag were discharged into the Queen and Ring Rivers, with an estimated 10 Mt of mine tailings building a delta of ca. 2.5 km² and ca. 10 Mt of fine tailings in the harbour beyond the delta. Coring of sediments throughout Macquarie Harbour indicated that mine tailings accreted most rapidly close to the King River delta source with a significant reduction in thickness of tailings and heavy metal contamination with increasing distance from the King River source. Close to the King River delta the mine tailings are readily discriminated from the background estuarine sediments on the basis of visual logging of the core (laminations, colour), sediment grain size, sediment magnetic susceptibility and elemental geochemistry, especially concentrations of the heavy metals Cu, Zn and Pb. The high heavy metal concentrations are demonstrated by the very high contamination factors (CF > 6) for Cu and Zn, with CF values mostly >50 for Cu for the mine-impacted sediments. Although the addition of mine waste into the King River catchment has ceased, the catchment continues to be a source of these heavy metals due to acid rock drainage and remobilisation of mine waste in storage in the river banks, river bed and delta. The addition of heavy metals to the harbour sourced from the Mount Lyell mines preceded the advent of direct tailings disposal into the Queen River in 1915 with the metals probably provided by acid rock drainage from the Mount Lyell mining area.     

Eco-Environmental Geochemistry of Heavy Metal Pollution in Dexing Mining Area

An eco-environmental geochemical investigation was carried out in and around the Dexing mining area to determine the concentrations of heavy metals in the surface water, sediments, soils and plants. The main objective of this study is to assess the environmental situation and evaluate the transferring of heavy metals from mining activities into the food chain. Some samples of water, sediment, topsoil and plant were collected along the Lean River in the Dexing mining area. The total concentrations of Cu, Pb, Zn, Cd, and As were determined by AAS, and Hg was analyzed by cold-vapor AAS. Some indices such as ‘contamination degree‘ , ‘geoaccumulation index‘ , and ‘biological absorption coefficient‘ were used to assess eco-environmental quality. The investigation indicated a highly localized distribution pattern closely associated with the two pollution sources along the Le‘an River bank: one is strong acidity and a large amount of Cu in the drainage from the Dexing Cu mining area; and the other is the high concentrations of Pb and Zn in the effluents released from many smelters and mining, processing and extracting activities in the riparian zone. Results from the investigated localities indicated, at least in part, that some problems associated with environmental quality deterioration should be solved in the future.     

Influence of mining activity on the downstream sediments of scheelite mines in Currais Novos (NE Brazil)

The study area is one of the most important mineral provinces of the Rio Grande do Norte State (NE Brazil), which has been extensively exploited since 1940. This article presents a geochemical investigation of stream sediments taken in the drainage system between the Brejuí and Barra Verde scheelite mines, and the Gargalheiras municipal reservoir, in Acari city. In addition to the major elements, the trace elements V, Cr, Co, Ni, Cu, Zn, As, Rb, Sr, Zr, Mo, Sn, Ba, W were analyzed and compared to metal levels reported in the literature for the same area. The elements W, Mo, Cu, Sn and in part Zn are enriched in sediments of rivulets forming the drainage system close to the mining district. This is due to emission from uncovered mine waste dumps. Dispersion of elements is controlled by both, aeolian as well as fluvial transport. The concentration of Cu in stream sediments close to the mines reaches toxic levels. At the mouth of the drainage system to the reservoir, the elements W and Mo are still enriched in the stream sediments relative to the geogenic background by factors of 15 and 11, respectively. This indicates the probable influence of mining activity to the reservoir sediments, and mobilization of W and Mo in the reservoir water cannot be ruled out.     

Effect of bacterial activity on trace metals release from oxidation of sphalerite at low pH (<3) and implications for AMD environment

A series of experiments was conducted to better understand the bacterial influence on the release of trace metals during oxidation of sphalerite mineral and element cycles in acid mine drainage (AMD) systems. Batch experiments were carried out as biotic and abiotic control at pH 3. Acidithiobacillus ferrooxidans, sulfur and Fe(II) oxidizer, was used in the biotic sphalerite experiment. The abiotic control experiment was run without adding the bacteria. The release behavior of six trace metals (As, Cd, Co, Pb, Cu and Mn), Fe and Zn were determined during the period of 54 days. Compared to the abiotic experiments, enhanced oxidation of sphalerite by bacteria produced high sulfate (~2,000 mg/L) and Fe_tot (139 mg/L) along with the low pH (<2.3). Consistent with this, the concentration of trace metals (As, Cd, Co, Pb, Cu and Mn) was significantly higher in the biotic experiments than those in the abiotic experiments. Results indicate that the distributions of Co and Cd in both biotic and abiotic experiments are directly related to the sphalerite dissolution whereas Pb, Cu distribution shows no strong relation to sphalerite dissolution especially in the abiotic experiments. Pb distribution in the solution appears to be controlled by pH-dependent solubility. Approximately 80% of the trace metals were removed from the solution at the end of the biotic experiments along with biologically induced Fe precipitation. Experimental results showed that bacteria play major role not only in the release of trace metal from sphalerite but also in controlling concentration of the metals in the solution by producing Fe-oxyhydroxides. The study suggest that in order to develop an effective rehabilitation strategy for AMD, it is necessary to understand bio/geochemical processes governing mobilization and deposition of trace metals in the environment.     

承德伊逊河钒钛磁铁矿小流域土壤重金属地球化学基线及生态风险累积效应

以承德市伊逊河红旗钒钛磁铁矿小流域为例,通过参比元素标准化法、垂向剖面似背景值法确定小流域矿集区土壤12种重金属的地球化学基线,并与不同空间尺度流域的重金属地球化学基线进行对比;采用确定的基线值结合地累积指数法、地统计学、生态风险指数法和GIS叠加法对流域土壤重金属潜在生态风险和累积程度进行了评价.结果表明:钒钛磁铁矿...     

Acid Mine Drainage and Heavy Metal Pollution from Solid Waste in the Tongling Mines, China

Based on investigation of the characteristics of solid waste of two different mines, the Fenghuangshan copper mine and the Xinqiao pyrite mine in Tongling, Anhui province in central-east China, the possibility and the differences of acid mine drainage （AMD） of the railings and the waste rocks are discussed, and the modes of occurrence of heavy metal elements in the mine solid waste are also studied. The Fenghuangshan copper mine hardly produces AMD, whereas the Xinqiao pyrite mine does and there are also differences in the modes of occurrence of heavy metal elements in the railings. For the former, toxic heavy metals such as Cu, Pb, Zn, Cd, As and Hg exist mostly in the slag mode, as compared to the latter, where the deoxidization mode has a much higher content, indicating that large amounts minerals in the waste rocks have begun to oxidize at the earth surface. AMD is proved to promote the migration and spread of the heavy metals in mining waste rocks and lead to environmental pollution of the surroundings of the mine area.     

Geochemical assessment of groundwater quality in vicinity of Bhalswa landfill,Delhi, India,using graphical and multivariate statistical methods

A geochemical assessment of groundwater quality and possible contamination in the vicinity of the Bhalswa landfill site was carried out by using a hydrochemical approach with graphical and multivariate statistical methods with the objective of identifying the occurrence of various geochemical processes and understanding the impact of landfill leachates on groundwater quality. Results indicate that nitrate, fluoride and heavy-metal pollution are in an alarming state with respect to the use of groundwater for drinking purposes. Various graphical plots and statistical analyses have been applied to the chemical data based on the ionic constituents, water types, and hydrochemical facies to infer the impact of the landfill on groundwater quality. The statistical analysis and spatial and temporal variations indicate the leaching of contaminants from the landfill to the groundwater aquifer system. The concentrations of heavy metals in the landfill leachates are as follows: Fe (22 mg/l), Mn (~20 mg/l), Cu (~10 mg/l), Pb (~2 mg/l), Ni (0.25 mg/l), Zn (~10 mg/l), Cd (~0.2 mg/l), Cl⁻ (~4,000 mg/l), SO₄²⁻ (~3,320 mg/l), PO₄³⁻ (~4 mg/l), NO₃⁻ (30 mg/l) and fluoride (~50 mg/l); all were much higher than the standards. The study reveals that the landfill is in a depleted phase and is affecting groundwater quality in its vicinity and the surrounding area due to leaching of contaminants.     

Sulfate reducing bioreactor dependence on organic substrates for remediation of coal-generated acid mine drainage: Field experiments

Field experiments were conducted over a 460-day period to assess the efficiency of different mixtures of organic substrates to remediate coalmine-generated acid mine drainage (AMD). Five pilot-scale, flow-through bioreactors containing mixtures of herbaceous and woody organic substrates along with one control reactor containing only limestone were constructed at the Tab-Simco site and exposed to AMD in situ. Tab-Simco is an abandoned coal mine near Carbondale, Illinois that produces AMD with pH ∼2.5 and notably high average concentrations of SO₄ (5050 mg/L), Fe (950 mg/L), Al (200 mg/L), and Mn (44 mg/L). Results showed that the sequestration of SO₄ and metals was achieved in all reactors; however, the presence and type of organic carbon matrix impacted the overall system dynamics and the AMD remediation efficiency. All organic substrate-based reactors established communities of sulfate reducing microorganisms that contributed to enhanced removal of SO₄, Fe, and trace metals (i.e., Cu, Cd, Zn, Ni) via microbially-mediated reduction followed by precipitation of insoluble sulfides. Additional mechanisms of contaminant removal were active in all reactors and included Al- and Fe-rich phase precipitation and contaminant surface sorption on available organic and inorganic substrates. The organic substrate-based reactors removed more SO₄, Fe, and Al than the limestone-only control reactor, which achieved an average removal of ∼19 mol% SO₄, ∼49 mol% Fe, 36 mol% Al, and 2 mol% Mn. In the organic substrate-based reactors, increasing herbaceous content correlated with increased removal efficiency of SO₄ (26–35 mol%), Fe (36–62 mol%), Al (78–83 mol%), Mn (2–6 mol%), Ni (64–81 mol%), Zn (88–95 mol%), Cu (72–85 mol%), and Cd (90–92 mol%), while the diversity of the intrinsic microbial community remained relatively unchanged. The extrapolation of these results to the full-scale Tab-Simco treatment system indicated that, over the course of a 460-day period, the predominantly herbaceous bioreactors could remove up to 92,500 kg SO₄, 30,000 kg Fe, 8,950 kg Al, and 167 kg Mn, which represents a 18.3 wt%, 36.8 wt%, 4.1 wt% and 82.3 wt% increase in SO₄, Fe, Al, and Mn, respectively, removal efficiency compared to the predominantly ligneous bioreactors.The results imply that anaerobic organic substrate bioreactors are promising technologies for remediation of coal-generated AMD and that increasing herbaceous content in the organic substrate matrix can enhance contaminant sequestration. However, in order to improve the remediation capacity, future designs must optimize not only the organic carbon substrate but also include a pretreatment phase in which the bulk of dissolved Fe/Al-species are removed from the influent AMD prior to entering the bioreactor because of 1) seasonal variations in temperature and redox gradients could induce dissolution of the previously formed redox sensitive compounds, and 2) microbially-mediated sulfate reduction activity may be inhibited by the excessive precipitation of Al- and Fe-rich phases.     

Geochemistry of iron ochres and mine waters from Levant Mine,Cornwall

The geochemistry of metal-rich mine waters and mineral precipitates from the Levant mine, Cornwall, has been examined. Sulphide oxidation at Levant mine has produced a wide range of secondary sulphides, oxides, chlorides, sulphates and carbonates in a gossan environment. The mine waters display a wide variation in alkalinity, pH, chloride, sulphate, sodium, potassium and heavy metal content which can be explained by variable degrees of mixing between acidic, metal-rich, rock drainage waters and neutral to alkaline sea waters. Transition metals are soluble in the acidic mine waters with concentrations up to 665 mg/l Cu, 41 mg/l Zn, 76 mg/l Mn, 6 mg/l Co and >2500 mg/l total Fe. The production of acid rock drainage and leaching of metals can be related to sulphide oxidation. Where these metal-rich acidic waters mix with infiltrated sea water, neutralization occurs and some metals are precipitated (principally Cu). Where pools of mine drainage are stagnant native copper and cuprite are precipitated, frequently observed replacing iron pipes and rail tracks and wooden shaft supports, due to electrode potential differences. In these solutions, dissolved copper species are also reduced by interaction with wood-derived organic species. Precipitation of iron oxyhydroxides, caused by a pH increase, also occurs and leads. to coprecipitation of other metals, including Cd, Co, Ph, Mn, Ag and Zn, thus limiting the release of dissolved metals in solution from the mine. However, the release of suspended metal-rich ochres in mine discharge waters (with high Ph, Zn, Cd, Mn, Ni, Sn, Sb, As, Bi, Cu, Co and Ag) will still present a potential environmental hazard.