Mineralogical and geochemical investigation of layered chromitites from the Bracco–Gabbro complex, Ligurian ophiolite, Italy

The Bracco–Gabbro Complex (Internal Liguride ophiolite), that intruded subcontinental mantle peridotite, contains layers of chromitite that are associated with ultramafic differentiates. The chromitites and disseminated chromites in the ultramafics have Al contents similar to the Al-rich podiform chromitites [0.40 < Cr# = Cr/(Cr + Al) < 0.55]. TiO₂ contents of the chromitites are unusually high and range up to 0.82 wt%. The calculated Al₂O₃ and TiO₂ content of the parental melt suggest that the melt was a MORB type. Geothermobarometrical calculations on few preserved silicate inclusions revealed formation temperatures between 970 and 820 °C under a relatively high oxygen fugacity (ΔlogfO₂ at +2.0–2.4). Chromitites were altered during the post-magmatic tectono-metamorphic uplift and the final exposure at the seafloor, as evidenced by the formation of ferrian chromite. The PGE contents of the chromitites and associated ultramafics are unusually low (PGEmax 83 ppb). The chondrite-normalized PGE spidergrams show positive PGE patterns and to some extent similarities with the typical trend of stratiform chromitites. No specific PGM have been found but low concentrations of PPGE (Rh, Pt, and Pd) have been detected in the sulphides that occur interstitially to or enclosed in chromite. Recently, it has been shown that the Internal Liguride gabbroic intrusions have formed by relatively low degrees of partial melting of the asthenospheric mantle. We conclude that the low degree of partial melting might be the main factor to control the unusual low PGE contents and the rather unique PGE distribution in the Bracco chromitites.     

Late Triassic-Early Jurassic Paleokarst from the Ligurian Alps and its geological significance (Siderolitico Auct., Ligurian Briançonnais domain)

In the Ligurian Briançonnais domain, the thick Middle Triassic carbonateplatform units, formally known as the Costa Losera Fm. and S. Pietro dei Monti Dolomites, are followed by a significant unconformity separating them from the Rio di Nava neritic limestones of Bathonian age. According to the evolution of a passive continental margin, the end of subsidence and subsequent uplift led to the progressive erosion of the Triassic carbonate platform from outer to inner units, i.e., in the direction of the Ligurian Tethys. This erosion, possibly acting on a fault-controlled block system, created sedimentary sequences of differential composition, and the virtual absence of the entire Triassic complex and even the underlying Permian rocks. In the study area (and in many other locations belonging to the external Ormea unit), the so-called “briançonnais sedimentary gap” shows more than a nondepositional surface: the associated deposits (known as “Siderolitico” Auct.) include both red pelites between the above-mentioned units, and deep-penetrating karstic red breccia within the Ladinian carbonates. We performed detailed stratigraphic, microfacies and compositional analyses on the karsts and paleosoils associated with the unconformity in order to define their character, genesis and age. In addition, we discuss the regional context and importance of these deposits in a large-scale comparison with the classic Briançonnais domain and other locations of the Western Alpine Arch with the same unconformity. In light of these data, we propose an Upper Triassic to Early Jurassic age (until the Upper Bajocian?) for the karstic event in the Ligurian Alps.     

Subduction of a fossil slow–ultraslow spreading ocean: a petrology-constrained geodynamic model based on the Voltri Massif,Ligurian Alps,Northwest Italy

Slow–ultraslow spreading oceans are mostly floored by mantle peridotites and are typified by rifted continental margins, where subcontinental lithospheric mantle is preserved. Structural and petrologic investigations of the high-pressure (HP) Alpine Voltri Massif ophiolites, which were derived from the Late Jurassic Ligurian Tethys fossil slow–ultraslow spreading ocean, reveal the fate of the oceanic peridotites/serpentinites during subduction to depths involving eclogite-facies conditions, followed by exhumation.

The Ligurian Tethys was formed by continental extension within the Europe–Adria lithosphere and consisted of sea-floor exposed mantle peridotites with an uppermost layer of oceanic serpentinites and of subcontinental lithospheric mantle at the rifted continental margins. Plate convergence caused eastward subduction of the oceanic lithosphere of the Europe plate and the uppermost serpentinite layer of the subducting slab formed an antigorite serpentinite-subduction channel. Sectors of the rather unaltered mantle lithosphere of the Adria extended margin underwent ablative subduction and were detached, embedded, and buried to eclogite-facies conditions within the serpentinite-subduction channel. At such P–T conditions, antigorite serpentinites from the oceanic slab underwent partial HP dehydration (antigorite dewatering and growth of new olivine). Water fluxing from partial dehydration of host serpentinites caused partial HP hydration (growth of Ti-clinohumite and antigorite) of the subducted Adria margin peridotites. The serpentinite-subduction channel (future Beigua serpentinites), acting as a low-viscosity carrier for high-density subducted rocks, allowed rapid exhumation of the almost unaltered Adria peridotites (future Erro–Tobbio peridotites) and their emplacement into the Voltri Massif orogenic edifice. Over in the past 35 years, this unique geologic architecture has allowed us to investigate the pristine structural and compositional mantle features of the subcontinental Erro–Tobbio peridotites and to clarify the main steps of the pre-oceanic extensional, tectonic–magmatic history of the Europe–Adria asthenosphere–lithosphere system, which led to the formation of the Ligurian Tethys.

Our present knowledge of the Voltri Massif provides fundamental information for enhanced understanding, from a mantle perspective, of formation, subduction, and exhumation of oceanic and marginal lithosphere of slow–ultraslow spreading oceans.     

Different types of fine-grained sediments associated with acid mine drainage in the Libiola Fe–Cu mine area (Ligurian Apennines,Italy)

Different types of fine-grained chemical precipitates were characterized in the surroundings of the pyrite-chalcopyrite mine of Libiola (Northern Italy). Both water chemistry and sediment composition were used to investigate metal mobility near the mine area. Local drainage waters were very acidic (with a pH as low as 2.5) and were rich in dissolved metals (Fe, Al, Cu, Zn, Mn, Ni). Sediments associated with low pH water (pH <4.5) were ochreous mixtures of schwertmannite and goethite with traces of jarosite. Their chemistry was dominated by Fe and they had, compared to other sediments investigated, low concentrations of other metals. When the acidity decreased gradually, other precipitates formed. At a pH of approximately 5, a poorly crystalline, whitish, Al-rich precipitate occurred. At a pH between 6 and 7, a poorly crystalline, blue, Cu (Zn) rich phase was present. These “sequential” precipitation events progressively reduced the metal loading typical of the acidic mine water when there was a gradual mixing with normal water. When a sudden mixing between normal waters (pH ∼8, Ca–HCO₃, low metal bearing) and acidic waters took place, a rapid flocculation occurred of mixed precipitates containing Fe, Al and trace elements.     

Asbestos fibre identification vs. evaluation of asbestos hazard in ophiolitic rock mélanges,a case study from the Ligurian Alps (Italy)

In recent years, the high incidence of harmful health effects through inhalation of airborne asbestos from amphibole-bearing rock mélanges has been thoroughly documented. Here, we present a field-based, multi-scale geological approach aimed at illustrating the occurrence of amphibole fibrous mineralisation in an ophiolitic suite from the Ligurian Alps (Italy) and discussing the implication on in situ determination of the asbestos hazard. The rock mélange is composed of plurimetre-sized blocks of different lithotypes (metagabbro, serpentinite, chloritoschist) juxtaposed by the meaning of tectonic structures. The geological-structural survey revealed that the fibrous mineralisation is localised in specific structural sites of the rock volume, including veins and schistosity. Both micro-chemical and crystal structure analyses on selected fibrous samples revealed that actinolite fibres grow in veins within the metagabbro and in chloritoschists, while fibrous tremolite occurs in serpentinite schistosity. The morphological features of these amphibole fibres have been analysed in TEM images and used for classifying them as “asbestiform” or “non-asbestiform”. The results show that the asbestos hazard determination is not unequivocally identified when different procedures for asbestos fibre identification and classification are applied. This may have impact on normatives and regulations in defining environmental hazards due to asbestos occurrence.     

Retrogressive fabric development during exhumation of the Voltri Massif (Ligurian Alps,Italy): arguments for an extensional origin and implications for the Alps–Apennines linkage

Geological mapping coupled with structural investigations carried out in the Voltri Massif (eastern Ligurian Alps, Italy) provide new data for the interpretation of the tectonic context controlling main fabric development during exhumation of its high-pressure core. The Voltri Massif is here interpreted as a c. 30 km-long eclogite-bearing, asymmetric dome formed by the progressive verticalisation of the regional, second-phase mylonitic foliation developed during retrogressive greenschist metamorphic conditions. In this light, the exhumation history is driven by a ductile-to-brittle extensional process, operating through low-angle, top-to-the-W multiple detachment systems. A Late Eocene–Early Oligocene age for this extensional episode is proposed on the basis of structural correlations, stratigraphic and radiometric constraints. In this scenario, the Voltri Massif is interpreted as an extensional domain developed to accommodate the Late Eocene–Early Oligocene arching of the Western Alps–Northern Apennines orogenic system.     

Comments on the paper ‘Subduction of a fossil slow–ultraslow spreading ocean: a petrology-constrained geodynamic model based on the Voltri Massif,Ligurian Alps,NW Italy’ by G. B. Piccardo

Analyses were made of samples of the several classes of iron meteorites: (hexahedrites, octahedrites, ataxites, and troilite inclusions) in further study of the isotopic composition of primordial lead and toward establishing correlation between the distribution of lead among the mineral inclusions and the nickel-iron mass of the meteorite. Two groups of iron meteorites can be distinguished on the basis of isotopic composition lead suggesting two ages for the parent bodies of common iron meteorites. The distribution of lead in iron meteorites ranges markedly but no relation could be found between isotopic composition of lead and the several structures and compositions. The content of lead in troilites are one or two orders of magnitude higher than in the nickel-iron phase.-- M. Russell.     

Late Oligocene–early Miocene olistostromes (sedimentary mélanges) as tectono-stratigraphic constraints to the geodynamic evolution of the exhumed Ligurian accretionary complex (Northern Apennines,NW Italy)

In the Northern Apennines of Italy, mud-rich olistostromes (sedimentary mélanges) occur at different stratigraphic levels within the late Oligocene–early Miocene sedimentary record of episutural/wedge-top basins. They are widely distributed along the exhumed outer part of the Ligurian accretionary complex, atop the outer Apenninic prowedge, over an area about 300 km long and 10–15 km wide. Olistostromes represent excellent examples of ancient submarine mass-transport complexes (MTCs), consisting of stacked cohesive debris flows that can be directly compared to some of those observed in modern accretionary wedges. We describe the internal arrangement of olistostrome occurrences in the sector between Voghera and the Monferrato area, analysing their relationships with mesoscale liquefaction features, which are commonly difficult to observe in modern MTCs. Slope failures occurred in isolated sectors along the wedge front, where out-of-sequence thrusting, seismicity, and different pulses of overpressured tectonically induced fluid flows acted concomitantly. Referring to the Northern Apennines regional geology, we also point out a gradual lateral rejuvenation (from late Oligocene to early Miocene) toward the SE and an increasing size and thickness of the olistostromes along the strike of the frontal Apenninic prowedge. This suggests that morphological reshaping of the outer prowedge via mass-transport processes balanced, with different pulses over a short time span, the southeastward migration and segmentation of accretionary processes. The latter were probably favoured by the occurrence in the northwestern part of the Northern Apennines of major, inherited palaeogeographic features controlling the northward propagation of the prowedge. Detailed knowledge of olistostromes, as ancient examples of MTCs related to syn-sedimentary tectonics and shale diapirism, and of their lateral variations in term of age and size, provides useful information in regard to better understanding of both the tectono-stratigraphic evolution of the Apenninic prowedge and the submarine slope failures in modern accretionary wedges.     

南秦岭Pb,Zn,Ag,Cu,Hg,Sb,菱铁矿成矿系列

以泥盆系占优势的南秦岭成矿带中存在有重要的Ｐｂ－Ｚｎ－Ａｇ，Ａｕ，Ｈｇ－Ｓｂ及Ｃｕ矿床。它们形成中晚古生带扬子地块北部被动大陆边缘的沉积盆地演化与造山期中，成矿系列显示出时间与空间的演化特征，构在了一个热水沉积成矿系列，成矿发生于一个热旋回中，各种矿化有相似的物源，每一种地质事件都有特定的金属富集及富集在型和大型矿床是该地区构造－岩浆变质变形作用的最终产物。     

等离子体质谱法测定岩石中的铌,钽,锆,铪,钍,铀

应用ＩＣＰ－ＭＳ法测定了岩石中的痕量Ｎｂ、Ｔａ、Ｚｒ、Ｈｆ、Ｔｈ、Ｕ，给出了检出限，并对酸溶和碱熔两种制样方法进行了对比实验。     

Quaternary： status, rank, definition, survival

The long controversy over the term ‘Quaternary‘ as a chronostratigraphic unit may be reaching an apotheosis, judging from recent papers (Pillans and Naish, 2004; Gibbard et al., 2005; and referencest herein). The debate is no longer centered on whether there should be a place in the geological time scale for a unit termed ‘Quaternary‘-despite its dubious past, it cannot be denied that a large body of earth-historical research is strongly identified with this term. The challenge now concerns an appropriate rank and definition of Quaternary with regard to other chronostratigraphic units. Several options have been proposed (Pillans and Naish, 2004), and Gibbard et al. (2005) encourage a debate on these before decision is reached. In this brief note, we describe an arrangement not previously considered that seems advantageous. It is instructive, however, to first review the Pleistocene Series and Neogene System, the two units that are directly affected by introduction of the Quaternary into the chronostratigraphic hierarchy.     

大陆漂移, 板块构造, 地质力学

本文简要地介绍了魏格纳大陆漂移说的主要内容及其提出的依据; 论述了在大陆漂移说的基础上, 由于海洋地质地球物理调查发现了大洋中脊、洋底扩张, 解释了大陆张裂的机制, 并建立了全球板块构造理论, 形成现代地学思想的革命; 李四光在大陆漂移说提出的同时已在积极地探讨和论述大陆地壳水平运动问题, 并结合中国大陆实际, 发展了陆内碰撞变形理论, 即包括全球大陆构造体系在内的地质力学理论和方法。他强调地质力学是一支脚站在地质上, 另一支脚站在力学上来研究地壳运动和变形现象。后来更扩大了其在资源、环境方面的应用。文章对魏格纳大陆漂移说、全球板块构造理论及地质力学三者的关系做了深入探讨, 论述了李四光地质力学理论方法的现代意义、超前意义, 提出要重视和发扬李四光留给中国人民的宝贵遗产, 建议深入学习李四光的著述, 结合地质调查新成果去丰富它和发展它。     

Source,transport, and fate of rhenium,selenium, molybdenum,arsenic, and copper in groundwater associated with porphyry–Cu deposits,Atacama Desert,Chile

We collected groundwaters in and around a large (313 Mt at 1.08% Cu and 0.3% cutoff) undisturbed porphyry copper deposit (Spence) in the hyperarid Atacama Desert of northern Chile, which is buried beneath 30–180 m of Miocene piedmont gravels. Groundwaters within and down-flow of the Spence deposit have elevated Se (up to 800 μg/l), Re (up to 31 μg/l), Mo (up to 475 μg/l) and As (up to 278 μg/l) concentrations compared to up-flow waters (interpreted to represent regional groundwater flow). In contrast, Cu is only elevated (up to 2036 μg/l) in groundwaters recovered from within the deposit; Cu concentrations are low down gradient of the deposit. The differential behavior of the metals/metalloids occurs because the former group dissolves as anions, enhancing their mobility, whereas the base metals dissolve as cations and are lost from solution most likely through adsorption to clay surface exchange sites and through formation of secondary copper chlorides, carbonates, and oxides. Most groundwaters within and down-flow of the deposit have Eh–pH values around the Fe^II/Fe^III phase boundary, limiting the impact of Fe-oxyhydroxides on oxyanions mobility. Se, Re, Mo, and As are all mobile (with filtered/unfiltered samples ～ 1) to the limit of sampling 2 km down gradient from the deposit. The increase in ore-related metals, metalloids, and sulfate and decrease in sulfate–S isotope ratios (from values similar to regional salars, + 4 to + 8‰ δ³⁴S_CDT to lower values closer to hypogene sulfides, + 1 to + 4‰ δ³⁴S_CDT) is consistent with active water–rock reactions between saline groundwaters and the Spence deposit. It is likely that hypogene and/or supergene sulfides are being oxidized under the present groundwater conditions and mineral saturation calculations suggest that secondary copper minerals (antlerite, atacamite, malachite) may also be actively forming, suggesting that supergene and exotic copper mineralization is possible even under the present hyperarid climate of the Atacama Desert.