降雨条件下酉阳大涵边坡滑动机制研究

以某厚堆积层滑坡为例,基于非饱和土力学理论,利用有限元方法,对雨水入渗条件下坡体的渗流及动态稳定性进行了计算和分析,研究了水分在坡体内的运移对边坡稳定性的时间效应。结果表明：边坡堆积体结构松散,土体强度差,边坡前缘坡降大,坡脚的开挖,为滑坡形成提供了便利条件;强降雨条件下使得坡脚附近首先发生变形失稳,牵引坡体后缘产生张拉裂。雨水沿坡面入渗,在坡体内形成渗流场,弱化岩土体参数,同时坡面形成饱和径流,使滑坡体前缘产生向下的渗透力,促使前缘坡体发生滑动,进而引发分级坡体产生滑移;强降雨初始阶段,滑坡体安全系数降低较快,很容易发生滑坡。该研究揭示了降雨入渗诱发厚堆积层边坡滑动机制,并以此建议采取以截、排、堵措施对边坡进行排水,同时设置嵌岩锚索抗滑桩及进行削坡清方措施对边坡进行综合治理,通过稳定性计算,效果良好。     

预加固高填方边坡滑动破坏的离心模型试验研究

2009年10月3日,攀枝花机场260×104 m3万方的高填方预加固边坡整体失稳,沿基覆界面下滑,并超覆于其下方的易家坪老滑坡之上,使易家坪老滑坡再次复活。这一填方边坡失稳事件最终导致机场停航两年。通过大型离心模型试验,再现了攀枝花机场预加固高填方边坡的滑动失稳过程,获得了边坡变形破裂的特征参量,阐明了边坡的滑动失稳机制。研究表明：天然工况下,边坡变形以坡顶沉降和沿基覆界面软弱层的蠕滑为主,坡体总体处于蠕滑变形状态;降雨和地下水工况下,坡体中后部拉张破裂和中前部挤压变形显著,具有塑性流动及推移式破坏特征,并最终产生溃滑失稳;预加固抗滑桩承受较大的边坡变形推力,且越靠近坡体后部的桩推力越大,最终从后向前逐排产生累进性剪断破坏,说明该填方边坡多排抗滑桩的平面布置和受力确定欠合理;降雨和地下水工况下,坡体的最大孔隙水压力是天然工况下的3.7倍,孔隙水压力对坡体失稳有重要作用;通过模型和原型的综合对比分析,该边坡的滑动失稳机制为推移式蠕滑-累进性折断-溃滑与超覆。     

Mechanism and failure process of Qianjiangping landslide in the Three Gorges Reservoir,China

The Qianjiangping landslide is a large planar rock slide which occurred in July 14, 2003 shortly after the water level reached 135 m in the Three Gorges Reservoir, China. The landslide destroyed 4 factories and 129 houses, took 24 lives, and made 1,200 people homeless. Field investigation shows that the contributing factors for the landslide are the geological structure of the slope, the previous surface of rupture, the water level rise, and continuous rainfall. In order to reveal the mechanism and failure process of the landslide, numerical simulation was conducted on Qianjiangping slope before sliding. Based on the characteristics and the engineering conditions of the landslide, the topography and the geological profiles of Qianjiangping slope before sliding is reconstructed. The seepage field of Qianjiangping slope before sliding was simulated with the Geostudio software. The results show that ground water table rises and bends to the slope during the rise of water level, and the slope surface becomes partially saturated within the period of continuous rainfall. Using the ground water table obtained above, the failure process of Qianjiangping slope is simulated with the Flac3D software. The results demonstrate that the shear strain increment, displacement, and shear failure area of the slope increased greatly after the water level rose and continuous rained, and the landslide was triggered by the combined effect both of water level rise and continuous rainfall. The development of shear strain increment, displacement, and shear failure area of the slope shows that the landslide was retrogressive in the lower part of the slope and progressive in the upper part of the slope.     

Formation and characteristics of the Xiaoba landslide in Fuquan,Guizhou, China

On August 27, 2014, a large-scale landslide occurred in Fuquan, Guizhou, China. This high-speed landslide caused considerable destruction; 23 people were killed, 22 were injured, and 77 houses were damaged. Field investigations, deformation monitoring, and numerical analyses have been performed to examine the characteristics and formation processes of this landslide. In the Xiaoba area, the slope showed a two-layered structure with a hard upper layer and a soft lower layer. Dolomite of the Dengying Formation in the slope front formed a locked segment controlling slope stability. Based on deformation and failure characteristics, the landslide is divided into sliding source area A and accumulation area B. The landslide is also divided into the following stages: bedding slip, tension cracking at the slope scarp, and the appearance of the locked section at the slope toe. Numerical calculations show that excavation led to maximum shear strain concentration along the interface of siltstone and slate in the middle of the slope, which became a potential sliding surface. Stress concentration and distribution of the plastic zone of the locked segment of the Dengying Formation dolomite occurred in the slope toe. Continuous rainfall caused the groundwater level to rise in the Xiaoba slope. The unfavorable geological structure was a determinant factor, and the combined effects of excavation and continuous rainfall were triggering factors that induced the landslide. The geomechanical mode for the Xiaoba landslide is sliding tension–shear failure.     

The characteristics and failure mechanism of the largest landslide triggered by the Wenchuan earthquake, May 12, 2008, China

Strong earthquakes are among the prime triggering factors of landslides. The 2008 Wenchuan earthquake (M _w = 7.9) triggered tens of thousands of landslides. Among them, the Daguangbao landslide is the largest one, which covered an area of 7.8 km² with a maximum width of 2.2 km and an estimated volume of 7.5 × 10⁸ m³. The landslide is located on the hanging wall of the seismogenic fault, the Yingxiu–Beichuan fault in Anxian town, Sichuan Province. The sliding mass travelled about 4.5 km and blocked the Huangdongzi valley, forming a landslide dam nearly 600 m high. Compared to other coseismic landslides in the study area, the Daguangbao landslide attained phenomenal kinetic energy, intense cracking, and deformation, exposing a 1-km long head scarp in the rear of the landslide. Based on the field investigation, we conclude that the occurrence of the landslide is controlled mainly by the seismic, terrain, and geological factors. The special location of the landslide and the possible topographic amplification of ground motions due to the terrain features governed the landslide failure. The effects of earthquakes on the stability of slopes were considered in two aspects: First, the ground shaking may reduce the frictional strength of the substrate by shattering of rock mass. Second, the seismic acceleration may result in short-lived and episodic changes of the normal (tensile) and shear stresses in the hillshopes during earthquakes. According to the failure mechanism, the dynamic process of the landslide might contain four stages: (a) the cracking of rock mass in the rear of the slope mainly due to the tensile stress generated by the ground shaking; (b) the shattering of the substrate due to the ground shaking, which reduced the frictional strength of the substrate; (c) the shearing failure of the toe of the landslide due to the large shear stress caused by the landslide gravity; and (d) the deposition stage.     

宁镇地区山前缓坡地层结构及其稳定性分析

近年来由于受极端强降雨天气的影响,宁镇地区山前缓坡发生多起中型-大型滑坡地质灾害,主要表现为间歇性蠕滑,规模较大,而滑移距离较小,一般小于30 m,该类滑坡严重威胁附近居民的生命和财产安全,造成巨大的经济损失和严重不良社会影响。为此,本文针对这一典型山前缓坡新型滑坡地质灾害,运用岩体结构控制论和优势面理论对其滑坡体地层结构及滑动机理进行研究,结果表明滑坡主要发生在山前缓坡地段,滑坡体具有特殊的地层结构及水文地质特性,受到强降雨作用时,在坡体内容易产生暂时性承压水,在其浮托力的作用下缓坡主要产生顶托破裂和剪切破坏,并随降雨产生间歇性蠕滑。     

缓倾煤层采空区上覆山体滑坡形成机制分析

下伏采空区的缓倾斜坡,由于采空区大小、方位不同和斜坡结构特征的差异,多存在地表沉陷、拉裂、局部崩塌、滑坡等工程地质问题,常常会诱发大规模的地质灾害。马达岭滑坡发育于存在软弱夹层和煤层采空区的缓倾斜坡中,由采空区的破坏和降雨诱发形成,体积达190104m3。调查和分析表明,脆弱的地质结构和坡体下伏采空区的破坏是滑坡形成的主要原因,降雨的促进作用加速了滑坡的发生; 马达岭滑坡的破坏模式为塌落-拉裂-剪切滑移,滑坡的形成机制和发展过程可以分为以下3个阶段: 斜坡后缘拉裂阶段,滑面贯通阶段和滑坡整体破坏阶段。崩滑体崩解后顺着沟谷向下游流动,形成长1.5km的泥石流碎屑堆积区,淹没大量农田。     

含软弱夹层库岸复杂滑坡体形成机制

黄土坡复杂滑坡体形成机制研究对滑坡稳定性分析非常重要。通过地层对比并考虑软弱夹层的发育特征建立了巴东城区黄土坡斜坡原岩结构模型,斜坡前缘巴东组第三段上亚段岩体中软弱夹层发育密集,可与黄土坡滑坡深部多级滑带对应。数值模拟计算表明,斜坡在形成演化过程中斜坡前缘巴东组第三段上亚段岩体出现了明显的剪应变集中分布,变形深度与斜坡临江I号崩滑堆积体厚度基本一致,可见斜坡岩体结构和斜坡演化过程的应力应变特征控制了临江I号崩滑堆积体的形成。三峡水库蓄水后会加剧滑坡体的剪切变形,泥化夹层的存在容易诱发深层滑坡。      

贵州兴义滑坡特征及过程预警研究

由于滑坡岩土体结构的复杂性和破坏机制的多样性,滑坡预警一直以来都是全球性难题,极具挑战性。本文论述了贵州省兴义滑坡特征及其成功预警,并分析了滑坡成功预警的关键因素。在对滑坡现场进行地质调查的基础上,综合应用卫星遥感、无人机航拍、LiDAR、地表位移监测等技术手段,初步分析结果认为,兴义滑坡属于典型的含软弱夹层的顺层岩质滑坡,滑源区坡体为2014年首次滑动后形成的不稳定斜坡,在不利的坡体结构加之与软弱夹层组合的地质条件下,受到长期重力及地下水作用,最终演变成滑坡地质灾害。兴义滑坡至2014年第一次滑动后,后缘山体对前缘公路和居民就产生了威胁,2019年2月17日凌晨5时53分,贵州省兴义市马岭镇龙井村兴-马大道旁约96×104 m3的山体再次发生顺层滑动。在滑坡发生前,研究人员就在滑坡体上安装了全球导航卫星系统(GNSS)和自适应性裂缝计两种位移监测传感器,对滑坡变形进行持续监控。现场监测数据实时传输到研究人员自主研发的“地质灾害监测预警系统”中,系统通过多种阈值综合预警模型自动计算监测数据并发布预警结果,在滑坡进入临滑阶段后,系统提前53 min发出了红色预警,完全避免了人员和经济损失。该滑坡的成功预警体现了自主研发的地质灾害监测预警系统、预警模型、监测仪器三者的适用性,可为今后类似滑坡的监测预警研究及应用提供借鉴。     

基于诱发机理的降雨型滑坡预警研究——以花岗岩风化壳二元结构斜坡为例

降雨型滑坡是我国主要的滑坡灾害类型,具有区域群集发生的特点,滑坡预警研究是防灾减灾的重要途径。传统的区域降雨型滑坡预报模型多采用统计结果建立降雨参数模型,对降雨诱发机理和斜坡失稳的力学机制考虑不足,预报可靠性和精度有限。本文以花岗岩风化壳地区某典型二元结构斜坡为原型,以实际勘查数据为基础,提取该斜坡结构特征,基于饱和-非饱和渗流理论,分析研究降雨入渗过程和斜坡失稳机制,建立典型斜坡的预警判据。1花岗岩风化壳地区典型二元结构斜坡为类土质斜坡,覆盖土层较厚,剖面上可分为两层,上层为坡积黏性土,土质松散,透水性强,下层为残积黏性土,土质相对致密,透水性较差。2采用不同降雨工况模拟分析降雨入渗过程。以50mm·d-1雨强为例,降雨持时30h以内时,降雨入渗主要集中在上层的坡积黏性土,斜坡前缘优先饱和,滑带开始出现积水现象;降雨持时40～50h时,斜坡表面降水持续入渗,在坡体后缘拉裂缝处,雨水沿着裂缝快速入渗坡体形成静水压力,增加坡体重量,增大下滑力,坡脚渗透路径短,最先饱和破坏,造成斜坡失稳。3监测斜坡不同部位（坡脚、中部、后缘）的孔隙水压力情况,随降雨入渗,斜坡土体孔隙水压力持续增大,由负趋近于零到大于零,斜坡土体由非饱和状态向饱和状态过渡,坡脚最先饱和,中部持续入渗,后缘土体饱和后,裂缝扩大致使大量雨水进入,使本已大量积水的滑带变形错动,斜坡失稳。4模拟分析得到斜坡失稳的不同降雨条件:中雨雨强（10mm·d-1）,历时约13d;大雨雨强（25mm·d-1）,历时约5d;暴雨雨强（50mm·d-1）,历时约2.2d;特大暴雨雨强（100mm·d-1）,历时约1.1d。在暴雨雨强时,降雨对该类斜坡的滞后作用约为5h。最后,建立了该类斜坡的临界降雨判据（I-D曲线）。     

基于离心机模型试验的甘肃江顶崖古滑坡复活机理研究

位于白龙江断裂带的甘肃舟曲江顶崖古滑坡规模巨大,受断裂活动、降雨入渗与河流侵蚀和人类工程活动等因素影响,多次发生复活-堵塞白龙江灾害事件,造成极大危害。为研究江顶崖古滑坡的复活机理,本文在野外地质调查的基础上,重点开展了滑体在含水率为10%、15%和20%条件下的离心机模型试验。研究表明:在滑体含水率为10%情况下,试验结束后仅在坡体中后部产生少量裂缝,但滑坡体整体还处于稳定状态; 而在滑体含水率为15%和20%情况下,滑坡均发生了破坏,在滑体含水率分别为15%、20%情况下坡体失稳所需离心加速度分别为100g和50g。试验测试分析表明,江顶崖古滑坡为推移式滑坡,其变形先从坡体中后部开始,坡体中后部产生裂缝,随后裂缝逐渐向前缘扩展,最终裂缝贯通造成滑坡滑动破坏。滑坡体的变形过程主要分为3个阶段: ①变形启动阶段(裂缝开始形成阶段); ②变形加速阶段(裂缝加速发展阶段); ③失稳阶段。通过离心模拟试验,结合野外调查分析,认为江顶崖古滑坡复活的因素主要受降雨和孔隙水压力的影响,是受前缘河流侵蚀牵引、降雨入渗造成滑坡中后部推移的耦合滑动。     

三峡库区巫山县塔坪H1滑坡变形机制

自2008 年三峡库区175 m试验性蓄水以来,受库水波动及强降雨影响,沿江库岸发生多起顺向古滑坡变形灾害。以三峡库区巫山县塔坪H1滑坡为例,结合近十年滑坡调查勘察与变形监测资料,分析了该滑坡蓄水后的变形特征。通过研究分析认为:（1）塔坪H1滑坡为顺层古岩质滑坡,岩体呈碎裂状,岩性主要为三叠系香溪组软硬相间的砂岩、泥页岩,岩层间夹多套软弱夹层,形成了多级滑带控制的滑坡变形。（2）滑坡变形分为3个区域,位移量变形最大的滑坡前缘消落带区域,最大水平位移已达80 cm,其次是处于缓慢变形状态的曲尺场镇前部区域和后部相对稳定的曲尺场镇区域。（3）数值模拟结果显示,库水位周期性波动影响着滑坡前缘涉水区域稳定性变化,短时强降雨沿岩体结构面入渗会加速滑坡中前部区域稳定性快速下降。在水位波动和短时强降雨的共同影响下,塔坪H1滑坡在每年汛期呈现缓慢变形。目前塔坪H1滑坡中前部处于持续变形阶段,亟需开展滑坡防治工程,提高滑坡稳定性,确保场镇安全。     

Analysis of an anti-dip landslide triggered by the 2008 Wenchuan earthquake in China

The Guantan landslide, with a total displaced mass of about 468 × 10⁴ m³, was triggered by the 2008 Wenchuan earthquake and succeeding rainfall in Jushui Town, Sichuan Province, China. The landslide occurred on an anti-dip hard rock slope with a weak rock founding stratum of 200 m in thickness. To investigate the failure mechanism of the Guantan landslide, dynamic behaviors of hard and soft rock slopes were investigated by means of large scale shaking table tests. The laboratory models attempted to simulate the field geological conditions of the Guantan landslide. Sinusoidal waves and actual seismic waves measured from the Wenchuan Earthquake were applied on the slope models under 37 loading configurations. The experimental results indicated that deformation mainly developed at a shallow depth in the upper part of the hard rock slope and in the upper (near the crest) and lower (near the toe) parts of the soft rock slope. An equation for predicting the depth of sliding plane was proposed based on the location of the maximum horizontal acceleration. Finally, it was concluded that the failure process of the Guantan landslide occurred in three stages: (1) toppling failure caused by compression of the underlying soft rock strata, (2) formation of crushed hard rock and sliding surface in soft rock as the result of seismic shocks, particularly in the horizontal direction, and (3) aftershock rainfall accelerates the process of mass movement along the sliding plane.     

考虑降雨条件的堆积体滑坡多场特征研究

重庆市西泉街滑坡于2007年7月中旬遭遇115a一遇的强降雨,导致滑坡产生明显的变形破坏现象,本文在滑坡实际勘察工作的基础上,基于饱和-非饱和渗流理论,考虑降雨入渗的影响,利用有限元分析软件Geo-Studio的不同模块模拟了不同降雨条件下滑坡稳定性的变化情况,进一步对不同降雨条件下滑坡的渗流场、应力场和位移场特征进行了综合分析。研究结果表明:（1）降雨作用下堆积体滑坡体内渗流场和位移场具有很好的相似性,即滑坡体内地下水流速矢量和位移矢量绝对值变化规律具有一致性;（2）滑坡前后缘的位移量与降雨强度和降雨历时均呈正相关性,且滑坡前缘位移量比后缘大;（3）大雨、暴雨和大暴雨持续作用下,XY向最大剪应力在滑坡前缘及前缘陡坎处集中,有局部产生滑动的趋势,而在特大暴雨持续作用下,XY向最大剪应力在滑带附近分布相对均匀,有整体产生滑动的趋势;（4）强降雨作用下堆积体滑坡模拟得到的变形破坏规律主要表现为滑坡前缘首先产生的鼓胀变形破坏牵引滑坡后缘产生拉张变形破坏,破坏规律与实际相符。     

间歇型降雨对堆积层斜坡变形破坏的物理模拟研究

为研究间歇型降雨作用下缓倾堆积层斜坡的变形破坏特征,以樱桃沟滑坡为例,进行了降雨作用下斜坡变形破坏的物理模拟研究。试验结果表明：前期降雨作用下坡体变形特征表现为前缘滑移沉陷、中部滑移、后缘沉陷、坡体裂缝生成,且前缘裂缝扩张明显,后期降雨作用下坡脚区域首先发生滑塌,然后依次向后缘传递发生逐阶滑塌破坏;降雨入渗易在基岩面上储存,形成暂态地下水位、高孔隙水压力区域和坡向渗流场,基岩面附近土体饱水时间长,软化程度高,抗剪强度弱化显著,边坡易沿基覆界面土层发生滑坡;坡体滑动易发生在降雨间歇期,触发特征表现为雨后坡体暂态饱和区水分和坡表积水持续下渗,导致地下水位上升滞后于降雨,造成坡体内浮托力、渗透力和孔隙水压力增大,有效应力降低,诱发滑坡。     

A large-scale obliquely inclined bedding rockslide triggered by heavy rainstorm on the 8th of July 2020 in Shiban Village,Guizhou, China

A large-scale obliquely inclined bedding rockslide, activated by a heavy rainstorm, occurred on July 8, 2020, at 7:05 (UTC?+?8) in Shiban Village, Songtao Miao Autonomous County, Guizhou Province, China. The loss of life in this event was greatly reduced owing to the local warning system for rainstorm-induced geohazards. To understand the failure characteristics, triggering factors, the genetic mechanism of the landslide, the geomorphological features, geological characteristics, hydrological conditions, and rainfall characteristics were systematically studied by a synthetic approach including field investigations, satellite imagery, unmanned aerial vehicle (UAV) photography, laboratory tests, and rainfall data statistics. The results indicated that the interface between the soft and hard rock, the well-developed joints, and the free face in front of the slope constituted the boundaries of this landslide. The concave topography at the back and southern edge of the landslide, the bare ground, and the cataclastic structure of the rock mass provided favorable conditions for the collection or infiltration of rainwater. The concentrated rainstorm was the direct trigger for the landslide, which led to a rapid inflow and retention of rainfall in the landslide through favorable landform and geological conditions. The groundwater recharge that cannot be drained in time caused the mechanical deterioration of rock mass and induced a rapid increase in pore water pressure in the landslide. Moreover, the water level of the Ganlong River at the toe of the slope also rose rapidly, and the uplift pressure in front of the slope increased accordingly. Under the combined action of these adverse factors, the overall anti-sliding force of the slope was less than the sliding force, finally resulting in the landslide. Remarkably, the local warning system for rainstorm-induced geohazards successfully forecasted the landslide, but the shortcoming is that the forecast time in advance is short. Nevertheless, the prediction has significantly reduced human casualties and provided valuable experience for the prediction of this type of landslide.

     

Heavy-rainfall-induced catastrophic rockslide-debris flow at Sanxicun,Dujiangyan, after the Wenchuan Ms 8.0 earthquake

This paper uses the catastrophic rockslide at Sanxicun village in Dujianyan city as an example to investigate the formation mechanism of a rapid and long run-out rockslide-debris flow of fractured/cracked slope, under the application of a rare heavy rainfall in July 2013. The slope site could be affected by the Wenchuan Ms 8.0 Earthquake in 2008. The sliding involved the thick fractured and layered rockmass with a gentle dip plane at Sanxicun. It had the following formation process: (1) toppling due to shear failure at a high-level position, (2) shoveling the accumulative layer below, (3) forming of debris flow of the highly weathered bottom rockmass, and (4) flooding downward along valley. The debris flow destroyed 11 houses and killed 166 people. The run-out distance was about 1200 m, and the accumulative volume was 1.9?×?10⁶ m³. The rockslide can be divided into sliding source, shear-shoveling, and flow accumulative regions. The stability of this fractured rock slope and the sliding processes are discussed at four stages of cracking, creeping, separating, and residual accumulating, under the applications of hydrostatic pressure and uplift pressure. This research also investigates the safety factors under different situations. The double rheological model (F-V model) of the DAN-W software is utilized to simulate the kinematic and dynamic processes of the shear-shoveling region and debris flow. After the shear failure occurred at a high-level position of rock, the rockslide moved for approximately 47 s downward along the valley with a maximum velocity of 35 m/s. This is a typical rapid and long run-out rockslide. Finally, this paper concludes that the identification of the potential geological hazards at the Wenchuan mountain area is crucial to prevent catastrophic rockslide triggered by heavy rainfall. The identified geological hazards should be properly considered in the town planning of the reconstruction works.     

On evaluating the stability of the Baiyian ancient landslide in the Three Gorges Reservoir area,Yangtze River: a geological history analysis

Numerous landslides have occurred during the construction of the Three Gorges Reservoir of the Yangtze River. Although the underlying causal factor of these landslides was heavy rainfall, the construction process was the trigger of some of them. We report here a systematic study aimed at reconstructing the geological history of an ancient landslide and, based on our results, an evaluation of the role of the history on current landslide stability. Data from detailed field surveys and the studies on geological dating revealed that the Baiyian landslide was composed of five structural parts of different geological ages, such as a sliding belt, disturbed rocks, ancient colluvium, alluvium of the Yangtze River and slope wash. The succession of ancient climates, terraces and tectonic processes in the study area were examined from 300 ka ago. The evolutionary history of the Baiyian ancient landslide can be divided into five distinct stages: development, occurrence, deposition, collapse and disintegration. Some parts of the ancient landslide are currently prone to instability due to the combination effects of heavy rainfall and construction of the reservoir.     

阳鹿高速公路K52新滑坡变形特征与成因机理分析

阳鹿（阳朔—鹿寨）高速公路K52新滑坡为古滑坡堆积体中局部复活的滑坡,处于急剧变形状态,需进行抢险性处治。复工后对该滑坡进行了详细的地质勘察及变形监测,借助FLAC3D软件对其成因、变形过程及变形机理进行了研究,得到了以下结论:（1）古滑坡堆积体形成于顺层岩质滑坡,堆积体内部发育软-可塑状软弱夹层风化页岩,为新滑坡的主要滑带土;（2）导致新滑坡变形的主要内因为不良地质、微地貌、特殊的岩土结构,主要外因为在中后部堆载、填土改变地表水径流路径、向滑坡排放生活用水及降雨;（3）新滑坡具有三层滑面,失稳前底部滑面为主滑面,失稳阶段中部滑面为主滑面,属前段推移后段牵引型复合式滑坡,具多级、逐级及渐进滑动特点;（4）新滑坡变形进程为:后缘拉张变形-中部剪切蠕变-滑体A、B推移剪出失稳-滑体C前缘临空牵引失稳;（5）新滑坡处治重点应防止顶部、中部及底部三个滑动面继续变形,也应防止古滑面及古滑坡堆积体内部其余风化页岩夹层产生次级滑动。     

Effects of geological and tectonic characteristics on the earthquake-triggered Daguangbao landslide,China

The Daguangbao landslide is the largest co-seismic landslide triggered by the Wenchuan earthquake (Ms 8.0) occurred on 12 May 2008. The landslide, which is 4.6 km long and 3.7 km wide, involves a volume of approximately 1.2 × 10⁹ m³. An exposed slip surface, situated at the southern flank of its source area, was observed with a length of 1.8 km along the main sliding direction and an area of 0.3 km². To study the geological and tectonic characteristics of the source area and their contributions to the landslide formation during the earthquake, detailed geological investigations were firstly conducted. And it is reached that the landslide occurred on the northwestern limb of the Dashuizha anticline with its scarp showing several geological structures, including joint sets, local faults, and folds. These tectonic-related structures potentially influenced the failure of the landslide. Secondly, further investigations were focused on the inclined planar sliding surface using 12 exploratory trenches, nine boreholes, a tunnel, borehole sonic data, and micro-images. These data reveal that the rock mass along the sliding surface was the fragmented rock of a bedding fault. A pulverized zone was observed on the sliding surface, which was the zone of shear localization during the landslide. This suggests that the shear failure of the Daguangbao landslide developed within the bedding fault. The rapid failure of the landslide was associated with the degradation of the rock mass strength of the bedding fault both before and during the 2008 Wenchuan earthquake. With this study, we propose that a pre-existing large discontinuity within a slope may be the basis for initiating a large landslide during earthquake.