Cytherean ridge belts connected with Tessera areas: Tensional or compressional structures?

The conclusion that the different ridge belt-bounded planitia and parquet terrains studied here define Venusian crustal plate-like units is evidently valid in the context of compressional ridge belt tectonics. The long ridge belts of Kamari and Tellus Dorsa, the ridge belts in the transition zone between Ishtar Terra and planitiae and Ausra Dorsa support the idea of NW-SE, (N-S) or E-W compression components, respectively. The planitia plates have been pushed from the south or south-east against the Ishtar Terra/Fortuna Tessera highland, which has opposed the movement, giving the impression of a relative southeast-directed force. The volcanic/diapiric transition zone between these colliding crustal units or plates evidently indicates mobilization of the subsurface unit overthrust by the parquet terrain.     

Evidence of vertical and horizontal motions on Venus: Maxwell Montes

Based on full-resolution Magellan radar images, the detailed structural analysis of central Ishtar Terra (Venus) provides new insight to the understanding of the Venusian tectonics. Ishtar Terra, centered on 65° N latitude and 0° E longitude includes a high plateau. Lakshmi Planum, surrounded by highlands, the most important being Maxwell Montes to the East. Structural analysis has been performed with classical remote-sensing methods. Folds and faults identified on radar images were reported on structural map. Their type and distribution allowed to define the style of the crustal deformation and the context in which these structures formed. This analysis shows that Lakshmi Planum formed under a crustal stretching associated with a volcanic activity. This area then became a relatively steady platform, throughout the formation of Maxwell Montes mountain belt. Maxwell Montes is characterized by a series of NNW-SSE trending thrust faults dipping to the East, formed during a WSW-ESE horizontal shortening. In its NW quarter, the mountain belt shows a disturbed deformation controlled by pre-existing grabens and old vertical crustal fault zone. The deformation of this area is characterized by a shortening of cover above a flat detachment zone, with a progressive accommodation to the southwest. All these tectonic structures show evidence of horizontal and vertical crustal movements on Venus, with subsidence, mountain belt raise, West regional overthrusting of this mountain belt, and regional shear zone.     

Small planitiae on Venus: Tensional or compressional tectonics?

The two small planitiae south of Fortuna Tessera define distinct crustal units not very unlike to small crustal plates or subplates. The mobile transformation zone between Fortuna Tessera and Allat Planitia is caused by colliding crustal plates and evidently indicates the mobilization of the planitia unit foiled by the parquet terrain. Ridges parallel to this zone and in dextral ridge groups on planitia support the idea of the main N(W)-S(E) compression. Allat Planitia has been pushed approximately from the south and southeast against Fortuna Tessera which, in contrary, has spreaded to the southeast. Within the smaller planitia there are two conjugate ridge sets and a third ridge set parallel to the parquet border. The crossing ridge sets favour the existence of a compressional NW-SE force, as do the N-S directed ridges of the middle planitia area.At least three tectonic phases within Allat Planitia can be found. The main compression was in N(W)-S(E) direction. Prominent right-handed en echelon ridge groups and long parallel ridges of the northern planitia area indicate this comrpessional environment as well as the transformation zone against Fortuna Tessera. Short dome-like ridges indicate the tension gash opening during a NW-SE compression phase. An E-W (or NWW-SEE) compression resulted in the formation of the long linear wrinkle ridge-like N-S structures on Allat Planitia. The NW-SE compression, which has caused the formation of the dextral, E-W oriented major fault, was then the youngest of the main tectonic phases involved within the area studied.     

Formation and evolution of Lakshmi Planum, Venus: Assessment of models using observations from geological mapping

Detailed geological analysis of the Lakshmi Planum region of western Ishtar Terra results in the establishment of the sequence of major events during the formation and evolution of western Ishtar Terra, an important and somewhat unique area on Venus characterized by a raised volcanic plateau surrounded by distinctive folded mountain belts, such as Maxwell Montes. These mapping results and the stratigraphic and structural relationships provide a basis for addressing the complicated problem of Lakshmi Planum formation and for testing the suite of models previously proposed to explain this structure. We review and classify previous models of formation for western Ishtar Terra into “downwelling” models (generally involving convergence and underthrusting) and “upwelling” models (generally involving plume-like upwelling and divergence). The interpreted nature of units and the sequence of events derived from geological mapping are in contrast to the predictions of the divergent models. The major contradictions are as follows: (1) The very likely presence of an ancient (craton-like) tessera massif in the core of Lakshmi, which is inconsistent with the model of formation of Lakshmi due to rise and collapse of a mantle diapir; (2) The absence of rift zones in the interior of Lakshmi that are predicted by the divergent models; (3) The apparent migration of volcanic activity toward the center of Lakshmi, whereas divergent models predict the opposite trend; (4) The abrupt cessation of ridges of the mountain ranges at the edge of Lakshmi Planum and propagation of these ridges over hundreds of kilometers outside Lakshmi; the divergent models predict the opposite progression in the development of major contractional features. In contrast, convergent models of formation and evolution of Lakshmi Planum appear to be more consistent with the observations and explain this structure by collision and underthrusting/subduction of lower-lying plains with the elevated and rigid block of tessera. These models are capable of explaining formation of the major features of western Ishtar (for example, the mountain belts), the sequences of events, and principal volcanic and tectonic trends during the evolution of Lakshmi. To explain the pronounced north-south asymmetry of Lakshmi these models need to consider the likelihood that the major focal points of collision are at the north and north-west margins of the plateau. We note that pure downwelling models, however, face three important difficulties: (1) The possibly unrealistically long time span that appears to be required to produce the major features of Lakshmi; (2) The strong north-south asymmetry of the Planum; the pure downwelling models predict the formation of a more symmetrical structure; and (3) The absence of radial contractional structures (arches and ridges) in the interior of Lakshmi that would represent the predictions of the downwelling models.     

Main fault tectonics of Meshkenet Tessera on Venus

The lengthy Meshkenet Tessera highland located between Ishtar Terra and coronae of the Nightingale group provides evidence of large-scale crustal movements. Its complex tectonic structures have various deformation geometries, thus indicating different tectonic sequences. The main parallel faults, first explained as rotational bookshelf faults, are more likely due to relative dextral direct shear movements of rectangular blocks. These faults have been active, possibly due to endogenic stresses, as indicated by mid-size ridge ranges which connect them to some of the large coronae. There are some compressional ridge belts around Meshkenet Tessera, while deformation within the tessera blocks has mostly been extensional.     

Tectonics of the southern escarpment of Ishtar Terra on venus from observations of morphology and gravity

Maxima of calculated topographical line-of-sight (LOS) gravity attractions caused by Ishtar Terra are shifted to the north with respect to the measured LOS free air gravity maxima south of the highland. This implies a tendency to isostatic compensation of central Ishtar and mass surpluses at the continental border and the southern forelands.The following scenario is compatible with the interpretation of the gravity anomalies and morphological features. Relative motions of the lowland Sedna Planitia against continental Ishtar Terra have caused buckling and flat subduction of the lowland lithospheric material. (Deep subduction can be ruled out by thermal reasons). The free air gravity high is modelled by surplus masses of the buckling and of the high density subducting plate. Evidence for this is given by several compressional features like Ut and Vesta Rupes at the southern continental border and ridges at the SW-flanks of Maxwell Montes. It is further supported by several possible volcanic-tectonic depressions located in the southern part of Ishtar. This local interpretation does not necessarily imply the existence of global plate tectonics on Venus like on Earth, but at least limited horizontal movements of the Venusian lithosphere seem to be likely. This result shows that plate recycling must be considered for heat transfer through the lithosphere beside conduction and hot spot volcanism.Contribution No. 273, Institut für Geophysik der Universität Kiel, F.R.G.     

Gravity studies of Aphrodite Terra on Venus

Aphrodite Terra is the largest highland area on Venus of the size of Africa. It is traversed by the Aphrodite-Beta belt of troughs with a length of 21 000 km. There are two other large belts of troughs on Venus: Themis-Atla, 14 000 km long, and Beta-Phoebe, 8000 km long. In this paper, four gravity profiles across Aphrodite Terra are studied and compared with the morphology.Western Aphrodite and Niobe Planitia to the north seem to be in isostatic equilibrium under the assumption of Airy compensation with a mean crustal thickness of T = 50 km. The graben area in the middle part of Aphrodite Terra shows negative isostatic gravity anomalies indicating deficit masses. The adjacent Atla Regio to the east is regionally Airy compensated with T = 50 km, and the mountains Nokomis, Maat and Ozza Montes are locally undercompensated, i.e. they are associated with surplus masses in the depth. Ulfrun Regio, a hilly terrain just east of Atla Regio is Airy compensated with T = 30 km. These results give a mean crustal thickness around 50 km for Aphrodite Terra. The isostatic disturbed zones in the middle of Aphrodite (grabens) and Atla Regio as well as the undercompensated Beta Regio have been associated with recent volcanism from the observation of the concentrations of electrical discharges in these areas. Atla and Beta Regiones are both located at intersections of the systems of troughs described above.Contribution No. 308, Institut für Geophysik der Universität Kiel, F.R.G.     

Geology of the southern Ishtar Terra/Guinevere and Sedna Planitae region on Venus

Recent high resolution, high incidence angle Arecibo radar images of southern Ishtar Terra and flanking plains of Guinevere and Sedna on Venus reveal details of topographic features resolved by Pioneer Venus. The high incidence angles of Arecibo images favor the detection of surface roughness-related features, and complement recently obtained low incidence angle Venera 15/16 images in which changes in surface topographic slope are well portrayed. Four provinces have been defined on the basis of radar characteristics in Arecibo images and topography. Volcanism and tectonism are the dominant processes in the mapped area, which has an average age of about 0.5–1.0 billion years (Ivanov et al., 1986). These processes vary in relative significance in the mapped provinces and it is likely that geologic activity has occurred simultaneously in all four provinces. On the basis of stratigraphic evidence, however, a general sequence is proposed which represents the major activity in each area. The low predominantly volcanic plains of Guinevere and Sedna Planitiae are the relatively oldest terrain. A major region of complex tectonic deformation, the Southern Ishtar Transition Zone, postdates much of the low plains and delineates the steep-sloped flanks of Ishtar Terra. Lakshmi Planum is characterized by a distinctive volcanic style (large low edifices, calderas, flanking plains) and at least in part postdates the Southern Ishtar Transition Zone. Relatively recent plains-style volcanism occurs locally in Sedna Planitia and embays the Southern Ishtar Transition Zone. Compressional deformation appears to dominate the mountains of the Ishtar plateau, but the nature of the tectonic deformation in the Southern Ishtar Transition Zone is very complex and likely represents a combination of extension, compression and strikeslip deformation. Arecibo data reveal additional coronae in the lowlands, suggesting that corona formation is an even more widespread process than indicated by the Venera data.     

Crustal tectonic zone on Venus

Various tectonic structures to the south and southeast of Ishtar Terra indicate areal stresses. Compression from east-southeast against Ishtar Terra has resulted in ridge belt formation and surface bending at Salme Dorsa, probably along the seam between two crustal units. En echelon fault zone indicates dextral strike-slip shear(s) resulted in the westward movement of planitia crust related to Ishtar Terra. Meshkenet Tessera displays differential dextral strike-slip faulting where the southernmost bar-like blocks have had largest relative movements. Compression against Tusholi Corona has resulted in foreland surface bending similar to that of Salme Dorsa. The tectonic zone as a whole resembles a dextral transform fault extending from a concave arc in the west to another concave arc in the east. The Cytherean surface, crust or uppermost lithosphere seems to be able to transmit stresses over distances. Deeper understanding of these processes is needed to gain a new idea of the crustal deformation on terrestrial planets.     

An Origin for the Linear Magnetic Anomalies on Mars through Accretion of Terranes: Implications for Dynamo Timing

The proposed existence of magnetic lineations in the Terra Cimmeria and Terra Sirenum regions of Mars was initially explained by Earth-like sea-floor spreading. Here we argue instead that these lineations could have been formed at a convergent plate margin through collision and accretion of terranes. A similar process produced banded magnetic anomalies, similar in geometry and even in size to those in Earth's North American Cordillera. Because only sparse and generally weak anomalies have been detected in the martian northern lowlands, which could constitute an analog to the terrestrial oceanic crust, it is possible that the magnetic field stopped its activity while crustal recycling was still active in Mars.     

Processes of crustal formation and evolution on Venus: An analysis of topography,hypsometry, and crustal thickness variations

On Venus, present evidence indicates a crust of predominantly basaltic composition and a relatively young average age for the surface (several hundreds of millions of years). Estimates of crustal thickness from several approaches suggest an average crustal thickness of 10–20 km for much of the lowlands and rolling plains and a total volume of crust of about 1 × 10¹⁰ km³, approximately comparable to the present crustal volume of the Earth (1.02 × 10¹⁰ km³). The Earth's oceanic crust is thought to have been recycled at least 10–20 times over Earth history. The near-coincidence in present crustal volumes for the Earth and Venus suggests that either: (1) the presently observed crust of Venus represents the total volume that has accumulated over the history of the planet and that crustal production rates are thus very low, or (2) that crustal production rates are higher and that there is a large volume of missing crust unaccounted for on Venus which may have been lost by processes of crustal recycling.Known processes of crustal formation and thickening (impact-related magma ocean, vertical differentiation, and crustal spreading) are reviewed and are used as a guide to assess regional geologic evidence for the importance of these processes on Venus. Geologic evidence for variations in crustal thickness on Venus (range and frequency distribution of topography, regional slopes, etc.) are outlined. The hypothesis that the topography of Venus could result solely from crustal thickness variations is assessed and tested as an end-member hypothesis. A map of crustal thickness distribution is compiled on the basis of a simple model of Airy isostasy and global Venus topography. An assessment is then made of the significance of crustal thickness variations in explaining the topography of Venus. It is found that the distinctive unimodal hypsometric curve could be explained by: (1) a crust of relatively uniform thickness (most likely 10–20 km thick) comprising over 75% of the surface, (2) local plateaus (tessera) of thickened crust (about 20–30 km) forming less than 15% of the surface, (3) regions of apparent crustal thicknesses of 30–50 km (Beta, Ovda, Thetis, Atla Regiones and Western Ishtar Terra) forming less than 10% of the surface and showing some geologic evidence of crustal thickening processes (these areas can be explained on the basis of geologic observations and gravity data as combinations of thermal effects and crustal thickening), and (4) areas in which Airy isostasy predicts crustal thicknesses in excess of 50 km (the linear orogenic belts of Western Ishtar Terra, less than 1% of the surface).It is concluded that Venus hypsometry can be reasonably explained by a global crust of generally similar thickness with variations in topography being related to (1) crustal thickening processes (orogenic belts and plateau formation) and (2) local variations in the thermal structure (spatially varying thermal expansion in response to spatially varying heat flow). The most likely candidates for the formation and evolution of the crust are vertical differentiation and/or lateral crustal spreading processes. The small average crustal thickness (10–20 km) and the relatively small present crustal volume suggest that if vertical crustal growth processes are the dominant mechanism of crustal growth, than vertical growth has not commonly proceeded to the point where recycling by basal melting or density inversion will occur, and that therefore, rates of crustal production must have been much lower in the past than in recent history. Crustal spreading processes provide a mechanism for crustal formation and evolution that is consistent with observed crustal thicknesses. Crustal spreading processes would be characterized by higher (perhaps more Earth-like) crustal production rates than would characterize vertical differentiation processes, and crust created earlier in the history of Venus and not now observed (missing crust) would be accounted for by loss of crust through recycling processes. Lateral crustal spreading processes for the formation and evolution of the crust of Venus are interpreted to be consistent with many of the observations derived from presently available data. Resurfacing through vertical differentiation processes also clearly occurs, and if it is the major contributor to the total volume of the crust, then very low resurfacing rates are required.Although thermal effects on topography are clearly present and important on both Venus and the Earth, the major difference between the hypsometric curves on Earth (bimodal) and Venus (unimodal) is attributed primarily to the contrast in relative average thickness of the crust between the two terrains on Earth (continental/oceanic; 40/5 km = 35 km, 8:1) and Venus (upland plateaus/lowlands; about 30/15 km = 15 km, 2:1) (35 – 20 km = a difference of 20 km). The Venus unimodal distribution is thus attributed primarily to the large percentage of terrain with relatively uniform crustal thickness, with the skewness toward higher elevations due to the relatively small percentage of crust that is thickened by only about a factor of two. The Earth, in contrast, has a larger percentage of highlands (continents), whose crust is thicker by a factor of eight, on the average, leading to the distinctive bimodal hypsometric curve.Data necessary to firmly establish the dominant type of crustal formation and thickening processes operating and to determine the exact proportion of the topography of Venus that is due to thermal effects versus crustal thickness variations include: (1) global imaging data (to determine the age of the surface, the distribution and age of regions of high heat flux, and evidence for the nature and global distribution of processes of crustal formation and crustal loss), and (2) high resolution global gravity and topography data (to model crustal thickness variations and thermal contributions and to test various hypotheses of crustal growth).'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci. Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Geology and tectonics of the Themis Regio-Lavinia Planitia-Alpha Regio-Lada Terra area,Venus: Results from Arecibo image data

New radar images obtained from the Arecibo Observatory (resolution 1.5–4.0 km) for portions of the southern hemisphere of Venus show that: the upland of Phoebe Regio contains the southern extension of Devana Chasma, a rift zone extending 4200 km south from Theia Mons and interpreted as a zone of extension; Alpha Regio, the only large region of tessera within the imaged area, is similar to tessera mapped elsewhere on the planet and covers a smaller percentage of the surface than that observed in the northern high latitudes; the upland made of Ushas, Innini and Hathor Montes consists of three distinct volcanic constructs; Themis Regio is mapped as an ovoid chain of radar-bright arcuate single and double ring structures, edifices and bright lineaments. This area is interpreted as a region of mantle upwelling and on the basis of apparent split and separated features, a zone of localized faulting and extension. Linear zones of deformation in Lavinia Planitia are characterized by lineament belts that are often locally elevated, are similar to ridge belts mapped in the northern high latitudes and are interpreted to be characterized mainly by compression; radar-bright lava complexes within Lavinia Planitia are unique to this part of the planet and are interpreted to represent areas of eruption of high volumes of extremely fluid lava; the upland of Lada Terra is bound to the north by a linear deformation zone interpreted as extensional, is characterized by large ovoids and coronae, is interpreted to be associated with an area of mantle upwelling, and is in contrast to the northern high latitude highland of Ishtar Terra. Regions of plains in the southern hemisphere cover about 78%; of the mapped area and are interpreted to be volcanic in origin. Located within the area imaged (10–78 S) are 52 craters interpreted to be of impact origin ranging from 8 to 157 km in diameter. On the basis of an overall crater density of 0.94 craters/10⁶ km², it is determined that the age of this part of the Venus surface is similar to the 0.3 to 1.0 billion year age calculated for the equatorial region and northern high latitudes. The geologic characteristics of the portion of the Venus southern hemisphere imaged by Arecibo are generally similar to those mapped elsewhere on the planet. This part of the planet is characterized by widespread volcanic plains, large volcanic edifices, and zones of linear belt deformation. The southern hemisphere of Venus differs from northern high latitudes in that tessera makes up only a small percentage of the surface area and the ovoid chain in Themis Regio is unique to this part of the planet. On the basis of the analysis presented here, the southern hemisphere of Venus is interpreted to be characterized by regions of mantle upwelling on a variety of scales (ovoids, region made up of Ushas, Innini and Hathor Montes), upwelling and extension (Themis Regio) and localized compression (lineament belts in Lavinia Planitia).     

Ridge belts on Venus: Morphology and origin

Ridge belts, composed of closely spaced individual ridges 5–20 km wide, form sinuous patterns 30–400 km wide and 200–2000 km long in the plains of northern Venus. They are not homogeneously distributed, but occur primarily in two regions: between 0 ° E and 90 ° E ridge belts are associated with large blocks of tessera, and have a cumulative length of about 13,200 km; and between 150 ° E and 250 ° E, the ridge belts form a fan-shaped pattern and have a total cumulative length of about 25,800 km. Most ridge belts trend within 10 ° of N-S. Five morphologic components exist within the ridge belts: (1) broad ridges, which have no sharp crest and usually occur individually in the plains: (2) discontinuous ridges, with short ridge segments less than 20 km long; (3) paired ridges, with closely spaced ridges (less than 10 km apart) that never merge; (4) parallel ridges, with widely spaced (10–50 km), less prominent ridges; and (5) anastomosing ridges, in which ridges splay at angles up to 30 °. Subtle cross-strike lineaments cut the ridge belts at angles of 30–90 ° to the ridge belt, and augen-shaped plains are often present in anastomosing ridges. We examine the relationships between the components, plains, cross-strike lineaments, and augen-shaped plains in five ridge belts. Broad arches similar to the arches associated with wrinkle ridges on the Moon, Mars and Mercury appear in all of the ridge belts examined. Through studying each of these components individually and in the context of five specific ridge belts, we conclude that these ridge belts formed by compressional forces. The ridge belts form a continuum of deformation, from the simple broad arches (Nephele Dorsa), representing small amounts of shortening, through asymmetric ridge belts in the plains (Pandrosa Dorsa) and adjacent to tessera (Kamari Dorsa), to ridge belts in troughs representing underthrusting (Ausra and Lukelong Dorsa). Underthrusting is also observed along the borders of Lakshmi Planum, associated with Freyja and Danu Montes.The interpreted compressional origins for the ridge belt components suggests that many of the other ridge belts are of compressional origin, although complex origins (involving a combination of extension, shear, and/or compression) for some ridge belts cannot be ruled out. Global high resolution data from the Magellan mission will permit global mapping of the characteristics and distribution of ridge belts and allow further tests for their origin and evolution.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence). Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Chocolate tablet aspects of tectonics of Meshkenet Tessera on Venus

The intrablock deformation of Meshkenet Tessera on Venus is mostly due to responses of the uppermost surface bedrock to tensional stresses. It is found that complex deformation structures within the highland blocks resemble those of formed in chocolate tablet boudinaging which has taken place after original parallel faulting and bar-like crustal block formation. The high-angle tessera structures with varying cross-cutting relations define styles and locations of multiphase deformation most evidently related to local relaxation of tessera topography. Series of progressive or superposed fracturing events with alternating fault directions took place at high angles during this relaxational deformation. Compressional ridges often surround these tesserae.     

Unstable extension of Enceladus' lithosphere

Regions near Enceladus' equator, Sarandib and Diyar Planitia, contain extensive sets of parallel ridges and troughs that may be diagnostic of the region's formation conditions. We present photoclinometry profiles across these ridges and troughs, which indicate that they are periodic, low-slope features with dominant wavelengths of 3 to 4 km and amplitudes between 100 and 400 m. The morphology of these terrains is consistent with formation via unstable extension of the lithosphere. Our numerical modeling demonstrates that unstable extension can generate large-scale topography under Enceladus-like conditions. Comparison of our photoclinometry profiles with the dominant wavelengths produced by our numerical model permits estimation of the background heat flow at the time the Sarandib-Diyar province formed. We estimate heat flows of 110 to , suggesting that resurfacing of the planitiae was accompanied by strong, localized heating. The extension necessary to produce the ridges and troughs may have been caused by now-inactive diapirs, internal phase changes, or other mechanisms. Our heat flux estimates imply elastic thickness at the time of resurfacing of 0.4 to 1.4 km, which are sufficient to have allowed satellite reorientation if the province was underlain by a low-density region. It is therefore plausible that Enceladus has experienced multiple heating events, each leading to localized resurfacing and global reorientation.     

Major volcanic landform formation on Venus: Possible determination by compression tectonics and crustal thickening

While low level shield volcanoes have formed on Venus, major volcanic structure formation in Ishtar Terra has been restricted to caldera formation. It is possible that the combination of compression tectonics and crustal thickening inhibits the amount of magma which reaches the surface in Ishtar Terra. In certain situations, coronae on Venus may form as undeveloped volcanic structures due to restricted magma rise in thick crustal areas.     

Lakshmi Planum,Venus: Characteristics and models of origin

Lakshmi Planum is distinctive and unique on the surface of Venus as an expansive (~2 × 10⁶km²), relatively smooth, flat plateau containing two large shield volcanoes and abundant volcanic plains in the midst of a region of extreme relief. It rises 3–5 km above the datum and is surrounded on all sides by bands of mountains interpreted to be of compressional tectonic origin. The major units mapped on Lakshmi are volcanic edifices, smooth, ridged and grooved plains units, and structural units referred to as ridged terrain. Three styles of volcanism are observed to dominate the surface of Lakshmi. Distributed effusive volcanism is associated with extensive plains deposits and many of the small shields, domes and cones mapped within the plateau. Centralized effusive volcanism is primarily associated with the paterae, Colette and Sacajawea, and their circumferential low-shield-forming deposits. The precise origin and evolution of these unusually large and complex structures is not understood, although a catastrophic, explosive origin is unlikely. Pyroclastic volcanism may be represented by a unit referred to as the diffuse halo. The origin and evolution of Lakshmi Planum is closely related to its compressional tectonic environment; volcanism on Lakshmi has occurred synchronously with tectonism in the surrounding orogenic belts. A model for the origin and evolution of Lakshmi Planum consisting of a continuous sequence of convergence and horizontal shortening of crustal segments against a preexisting block of tessera seems best able to account for the elevation, plateau shape and irregular polygonal outline of Lakshmi, as well as the presence of ridged terrain and its resemblance to tessera. Volcanism on Lakshmi is proposed to be the result of basal melting of a thickened crustal root. According to this model, the origin and evolution of Lakshmi Planum has consisted of the following sequence of events: (1) formation of a large, elevated block of tessera surrounded by low-lying plains; (2) convergence and underthrusting of crustal segments to produce peripheral mountain ranges, thickening, and uplift of the plateau; and (3) basal melting of the thickened crust and underthrust material and surface volcanism that occurred synchronously with continued edge deformation.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence). Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

On geological processes on venus: Analysis of the relationship between altitude and degree of surface roughness

Aiming to study the relationship between Venus surface heights and surface roughness, the Pioneer Venus surface altitude map and map of r.m.s. slope in m-dkm scale have been analy sed for the Beta and Ishtar regions using a system of digital image processing. To integrate the data obtained, the results of geomorphological analysis of Venera 9 and 10 TV panoramas as well as gamma-spectrometric and photometric measurements were used. The analysis gives proof that Venera 9 and 10 landing sites represent geologic-morphologic situations typical of Venus, thus enabling the results of observations made at landing sites to be extended to large provinces. Apparently this conclusion is also applicable to the Venera 8 landing site. No strong relationship exists between the roughness of the surface and its altitude or the amount of a regional slope; neither for the Beta nor for the Ishtar region. A weak direct correlation observable for roughness-altitude pairs for the Beta region and roughness-altitude, roughness-slope pairs for the Ishtar region are quite obviously a consequence of regional roughness control, i.e. of an overall character of geological structure. On Venus the factors contributing to higher surface roughness on the m-dkm scale are, obviously, mostly volcanic and tectonic in their nature whilst those responsible for smoothing-out of the surface are chiefly exogenic. The rate of exogenic transformation of the Cytherean surface may be fairly high. On Venus, similarly as on the Earth, active tectono-magmatic processes have possibly taken place in recent geological epochs. One of the places where they are manifest is an extensive zone running from north to south across the Beta, Phoebe and Themis highlands. Within its limits occur both the process of basaltic shield-type volcanism and areal basalt effusions at low hypsometric levels accounting for the formation of lowland plains at the expense of ancient rolling plains. The basalts of the shield volcano Beta show some differences in composition compared to those of areal effusions at low hypsometric levels. The overall character of Cytherean tectonics in the recent geologic epoch is apparently block-type with a predominance of vertical movements. Against the background of the sinking of some of the blocks the other ones are rising and, possibly, such compensation upheavals have been responsible for the formation of the Ishtar region.     

Eastern Aphrodite Terra on Venus: Characteristics,structure, and mode of origin

Eastern Aphrodite Terra and Western Aphrodite form an altimetrically prominent 14,000 km long part of the equatorial highlands on Venus. Several parallel linear discontinuities striking northwest across the general east-west regional strike of the highlands are mapped in the altimetric and radar image data of Eastern Aphrodite and identified on the basis of abrupt termination of rift-like central chasma, offset and segmentation of the center of the highlands, and radar image discontinuities in the lowlands to the north. These characteristics are similar to those of linear discontinuities previously mapped in Western Aphrodite in terms of length, orientation, and influence on the central highlands and adjacent lowlands.Altimetric profiles in directions parallel to the discontinuities are regionally symmetric, more ridge-like in Eastern Aphrodite compared to the plateau-dominated form of topography in Western Aphrodite, and are characterized by alternating paired ridge-and-trough forms near their crests and on their flanks. By mapping the center of symmetry in multiple profiles, the prominent segmentation of the highland is shown to be imparted by an offset of the regional symmetry along the mapped discontinuities. These characteristics are morphologically similar to several of the large-scale characteristics of divergent plate boundaries of Earth, including mid-ocean rise crests and rifts, offset at fracture zones and transform faults, and symmetric thermal boundary layer topography.The altitude of the surface in profiles parallel to the discontinuities decreases as the square root of distance from the symmetry axes and with a slope similar to that predicted for thermal boundary layer topography associated with rates of divergence on Venus of ~ 1 ± 0.5 cm/yr. In order to test the hypothesis that the linear discontinuities are analogous to fracture zones, the predicted altitude of the surface at great distance from the centers of symmetry of the central highland and in directions across the discontinuities was calculated on the basis of a thermal boundary layer topography model with offset of altimetric symmetry at each discontinuity. Similarity of observed Arecibo high-resolution altimetric profiles across the discontinuities with that calculated for thermal boundary layer topography offset by transform faults reveals that in terms of the sense and magnitude of regional steps in altimetry across discontinuities and the altitude of the surface, Eastern Aphrodite is similar to the known characteristics of crustal spreading at divergent boundaries. The plateau-like form of Western Aphrodite and the ridge-like form of Eastern Aphrodite are analogous respectively to the difference between areas of anomalous (Iceland) and normal crustal production along rise crests on Earth. Estimates of volumetric differences in crustal production in the environment of Venus and as it would be influenced by differences in mantle temperature beneath Western and Eastern Aphrodite imply that Eastern Aphrodite represents normal crustal production. On this basis, Western Aphrodite may be characterized by a mantle temperature that is warmer than the mantle beneath Eastern Aphrodite Terra, perhaps in association with deep convective mantle upwelling.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Paleogeographic and paleotopographic evolution of the Swiss and Eastern Alps since the Oligocene

The Alps are representing the most prominent topographic feature of central Europe in the last 30 Million years. Integration of sediment budget and thermochronological data show that crustal blocks within the Swiss and Eastern Alps experienced differential erosion and uplift, with eastward decreasing rates. Since 30 Ma, in the course of collision and slab breakoff, the Swiss and western Eastern Alps were uplifted and formed a mountain range. Moderate erosion rates stabilized  2 Myr later after adaption to the new base level. Between 28 Ma and 5 Ma, erosion rates shifted above and below different regional mean levels. These shifts of erosion rates were governed by changes of the tectonic setting. Moderate temporary drops of erosion rates and lowering of topography occurred at  21 Ma and  15 Ma in the course of lateral extension. Temporary rises occurred between 24 and 22 Ma during thrust loading and between 18 and 16 Ma during axial updoming of core complexes. By 5 Ma, a sustainable strong increase of erosion rates occurred in the Swiss and Western Alps. A much weaker increase is detected in the Eastern Alps somewhat later, which makes a tectonic trigger, probably a 2nd slab breakoff, more reasonable than a climatic trigger. However, this controversial 5-Ma event is superimposed by accelerated erosion after 2.7 Ma, governed by the onset of cyclic glaciations. Effective valley incision and sediment evacuation by glacial erosion caused isostatic compensation and pronounced young uplift of the Alps.The post-Eocene paleotopographic evolution of key areas is indirectly assessed on the base of erosion rates. Spatial change of paleotopography of the Alps and central Europe is estimated and illustrated in 3 paleogeographic maps.