Petrologic, isotopic, and radiometric age constraints on the origin and tectonic history of the Malino Metamorphic Complex, NW Sulawesi, Indonesia

The Malino Metamorphic Complex (MMC) is located at the western end of the north arm of Sulawesi. It consists of mica schists and gneisses (derived from proximal turbidite and granitoid protoliths), with intercalations of greenschist, amphibolite, marble, and quartzite, forming an E-W elongated dome-like structure bounded on all sides by faults. The age of the MMC is constrained between Devonian and Early Carboniferous. This Paleozoic age, the presence of Archean and Proterozoic inherited zircons, and the isotopic signature of the mica schists and gneisses indicate that the terrane was derived from the New Guinea-Australian margin of Gondwana. Similarities with basement rocks in the Bird’s Head suggests a common origin. Greenschists forming a discontinuous selvage (metamorphic carapace) around the complex were derived from adjacent autochthonous Paleogene formations. The rocks of the MMC show a Barrovian-type progression from greenschist through epidote-amphibolite to amphibolite facies. P–T estimations suggest a depth of burial of up to 27–30 km. K/Ar and 40Ar/39Ar cooling ages of 23–11 Ma, and a 7 Ma age for unconformably overlying volcanic rocks, indicate that the complex was exhumed during the Miocene. Two tectonic scenarios are considered: 1. the continental fragment docked with Sulawesi during the Mesozoic and was exhumed as a metamorphic core complex during the Miocene; 2. it was subducted beneath the north arm during the late Oligocene and then rapidly returned back to the surface.     

Triassic paragonite- and garnet-bearing epidote-amphibolite from the Hida Mountains, Japan

Paragonite- and garnet-bearing high-grade epidote-amphibolite (PGEA) in the Ise area of the Hida Mountains, Japan is characterized by the high-pressure (HP) epidote-amphibolite facies parageneses (M₁), garnet + hornblende + clinozoisite + paragonite + quartz + rutile. Paragonite and garnet of the peak M₁ stage are locally replaced by retrograde albite (+ oligoclase) and chlorite (M₂), respectively. Phase equilibria constrain peak metamorphic conditions of P = 1.1–1.4 GPa and T = 530–570 °C, and a decompressional P–T path for this rock. Mineral parageneses of prograde epidote-amphibolite facies are comparable to some HP rocks from the Hongan region of western Dabie, but differ from other HP mafic schists with cooling ages of c. 330 Ma in the Hida Mountains. New paragonite K–Ar dating for the PGEA yields a Triassic cooling event at 210 Ma that is coeval with regional cooling and exhumation of the Sulu–Dabie–Qinling (SDQ) belt. Both petrological and geochronological data of the Triassic HP epidote-amphibolite in Hida Mountains support our earlier hypothesis that the SDQ belt extends across the Korean Peninsula to SW Japan.     

SHRIMP U–Pb zircon dating of quartz-bearing eclogite from the Sanbagawa Belt, south-west Japan: implications for metamorphic evolution of subducted protolith

In order to decipher the origin of eclogite in the high‐P/T Sanbagawa metamorphic belt, SHRIMP U–Pb ages of zircons from quartz‐bearing eclogite and associated quartz‐rich rock (metasandstone) were determined. One zircon core of the quartz‐rich rock yields an extremely old provenance age of 1899 ± 79 Ma, suggesting that the core is of detrital origin. Eight other core ages are in the 148–134 Ma range, and are older than the estimated age for trench sedimentation as indicated by the youngest radiolarian fossil age of 139–135 Ma from the Sanbagawa schists. Ages of metamorphic zircon rims (132–112 Ma) from the quartz‐rich rock are consistent with metamorphic zircon ages from the quartz‐bearing eclogite, indicating that eclogite facies metamorphism peaked at 120–110 Ma. These new data are consistent with both the Iratsu eclogite body and surrounding highest‐grade Sanbagawa schists undergoing coeval subduction‐zone metamorphism, and subsequent re‐equilibration under epidote amphibolite facies conditions during exhumation.     

Lithological subdivision and petrology of the Great Himalayan Vaikrita Group in Kumaun,India

The Vaikrita Group made up of coarse mica-garnet-kyanite and sillimanite-bearing psammitic metamorphics constituting the bulk of the Great Himalaya in Kumaun is divisible into four formations, namely theJoshimath comprising streaky, banded psammitic gneisses and schists, the Pandukeshwar consisting predominantly of quartzite with intercalations of schists, thePindari made up of gneisses and schists with lenses of calc-silicate rocks and overwhelmingly injected by Tertiary pegmatites and granites (Badrinath Granite) leading to development of migmatites, and theBudhi Schist comprising biotite-rich calc-schists. The Vaikrita has been thrust along the Main Central Thrust over the Lesser Himalayan Munsiari Formation made up of highly mylonitized low-to meso-grade metamorphics, augen gneisses and phyllonites. Petrological studies demonstrate contrasting nature of metamorphism experienced by the Vaikrita and the Munsiari rocks. Sillimanite-kyanite-garnet-biotite-muscovite (±K-feldspar and ± plagioclase).—quartz metapelites and interbanded calc-schists and calc-gneisses with mineral assemblages of calcite-hornblende-grossular garnet, labradorite (An₅₀?An₆₅), (± K-feldspar)-quartz (± biotite), and hornblende-diopside ± labradorite ± quartz, suggest medium to high grade of metamorphism or indicate upper amphibolite facies experienced by the rocks of the Vaikrita Group. The associated migmatites, granite-gneisses and granites of the Pindari Formation were formed largely as a result of anatexis of metapelites and metapsammites. While, the sericite-chlorite-quartz and muscovite-chlorite-chloritoid-garnet-quartz, assemblages in metapelites and epidote-actinolite-oligoclase (An₂₀)-quartz and epidote-hornblende-andesine (An₂₉) ± quartz in the metabasites suggest a low-grade metamorphism (greenschist facies) for the Munsiari Formation, locally attaining the lower limit of medium-grade (epidote-amphibolite) facies. The inferred P-T conditions obtained from textural relations of various mineral phases and the stability relationship of different coexisting phases in equilibrium, suggest that the temperature ranged between 600° and 650° C and pressure was over 5 kb for the Vaikrita rocks. The mineral assemblages of the Munsiari Formation indicate comparatively lower P-T conditions, where the temperature reached approximately 450° C and pressure was near 4 kb. The rocks of the two groups were later subjected to intense shearing, cataclasis and attendant retrograde metamorphism within the zone of the Main Central (=Vaikrita) Thrust.     

Controls on hydrothermal Fe oxide–Cu–Au–Co mineralization at the Guelb Moghrein deposit, Akjoujt area, Mauritania

The Guelb Moghrein Fe oxide–Cu–Au–Co deposit, with a total resource of 23.6 Mt at 1.88% Cu, 1.41 g/t Au, and 143 g/t Co, is hosted by an extensive metacarbonate body. However, it is restricted to up to 30-m wide tabular breccia zones developed parallel to discrete shear zones that transect the host metacarbonates. The Fe–Mg clinoamphibole–chlorite schists represent up to 1-m thick interlayer metasediments and localized viscous shearing in these shear zones. Siderite of the metacarbonate body was deformed into a breccia and was replaced by an ore and alteration assemblage comprised of Fe–Mg clinoamphibole, magnetite, pyrrhotite, chalcopyrite, graphite, Fe–Co–Ni arsenides, arsenopyrite, cobaltite, uraninite, and Bi–Au–Ag–Te minerals. In contact with wall rock amphibolites, the metacarbonate body is enveloped by an alteration halo up to 40 m wide, consisting of biotite, actinolite, grunerite, chlorite, calcite, albite, and quartz. The Guelb Moghrein ore body is structurally controlled by shear zones that developed in the footwall of a regional thrust zone. This thrust separates greenschist facies quartz–sericite schists and biotite–garnet–quartz schists of the Sainte Barbe volcanic unit in the hanging wall from amphibolite facies metavolcanic rocks, metacarbonates, and the Guelb Moghrein ore body of the Akjoujt metabasalt unit in the footwall. Peak temperatures of the latter unit are estimated by hornblende–plagioclase thermometry at 580±40°C. Thrusting was retrograde for the Akjoujt metabasalt unit, but prograde for the Sainte Barbe volcanic unit at P–T conditions of about 410±30°C and 2–3 kbar (garnet–biotite thermometry). Structural and petrological evidences suggest that the ore fluids migrated along the shear zones and reacted with the siderite in the metacarbonate. This evolution and the setting of Guelb Moghrein in the fold-and-thrust belt of the Pan-African to Variscan Mauritanides (Mauritania, West Africa) resemble Proterozoic Fe oxide–Cu–Au–Co deposits such as examples from the Tennant Creek and Mount Isa Inliers, Australia.Electronic Supplementary Material Supplementary material is available for this article at     

Subduction related antigorite CPO patterns from forearc mantle in the Sanbagawa belt,southwest Japan

Antigorite (Atg) is stable throughout large parts of the wedge mantle of most subduction zones. Atg shows strong acoustic anisotropy and crystallographic preferred orientation (CPO) patterns of this mineral may contribute significantly to seismic anisotropy in convergent margins. Atg CPO patterns from the Higashi-Akaishi (HA) forearc mantle body of southwest Japan adds to the data set suggesting the most common Atg CPO pattern has a c-axis perpendicular to the foliation and a b-axis parallel to the stretching lineation. Statistical analysis using the eigenvector method of Atg CPO from two mutually perpendicular directions in the same sample (YZ-section and XZ-section) shows no significant differences implying sample preparation has no significant affect on the resulting Atg CPO. Reuss (uniform stress) averages of anisotropy for the Higashi-Akaishi samples are approximately treble the values for Voigt (uniform strain) averages. When comparing calculated anisotropy of hydrated mantle peridotite samples—such as the Higashi-Akaishi unit—with observed S-wave delay times in convergent margins, the appropriate averaging method needs to be considered.     

Evidence of glaucophane-schist facies metamorphism in the East Karkonosze complex,West Sudetes,Poland

In the East Karkonosze complex (Karkonosze = Riesengebirge), which occurs at the northern margin of the Bohemian massif, rocks of the glaucophane-schist facies and transitions between the glaucophane-schist facies, greenschist facies and epidote-amphibolite facies are present. They belong to the Leszczyniec Volcanic Formation (LVF) of Cambrian/Ordovician age and to the mainly metasedimentary Czarnów Schist Formation (CSF) of Ordovician/Silurian age. Similar high-pressure, low-temperature rocks occur in the southern Karkonosze and in the Kaczawa Mountains within metavolcanic formations of approximately the same age. Petrographic and electron probe studies show complex relationships between minerals including chemical zoning. In the East Karkonosze three stages of metamorphism pre-dating contact metamorphism by late Variscan (lowermost Upper Carboniferous) granite intrusion were distinguished [stage 1: ocean floor, amphibolite facies (observed only in part of the LVF); stage 2: high-pressure, low-temperature, variably glaucophane-schist facies, high-pressure greenschist facies and epidote-amphibolite facies; stage 3: medium-pressure greenschist facies accompanied by strong deformations]. Glaucophane-schist facies rocks formed in stage 2 survived the later stages of metamorphism only in the southern part of East Karkonosze, i. e. in Lasocki Range and Rýchory. Using the Maruyama et al. (1986) geobarometer the glaucophane-bearing rocks formed at 6.5–7 Kb, those with crossite at 5–6 Kb and rocks with magnesioriebeckite/riebeckite at 4–5 Kb. Other estimates for glaucophane-bearing rocks give somewhat higher values of pressure, i. e. 7–12 Kb at temperatures between 300 and 530°C. The highest temperatures are recorded in the glaucophane- and garnet-bearing rocks. Stilpnomelane may occur in all of these rocks. The subduction/obduction episode responsible for this high-pressure, low-temperature metamorphism is considered to have taken place in the early Variscan, although no geochronology is yet available to confirm this.     

Découverte des roches à affinité ophiolitique dans la chaîne panafricaine au Cameroun : les talcschistes de Ngoung, Lamal Pougue et Bibodi Lamal

Outcrops of talc schists extending over >1 km have been discovered within the garnet- and muscovite-bearing mica schist of the Pan-African belt near Yaoundé (Cameroon). Mineralogical studies show that a metamorphism of the upper greenschist facies was prolonged by hydrothermal reactions. This latter led to the transformation of hornblendites into talc schists. Chemically, talc schists and relicts of hornblendite remind ultrabasic rocks, and REE patterns point to E-MORB and peridotite. It is thus suggested that the talc schists and relicts of hornblendite may correspond to slices of a dismembered Pan-African ophiolite set. To cite this article: C. Nkoumbou et al., C. R. Geoscience 338 (2006).     

Intra-oceanic island arc origin for Iratsu eclogites of the Sanbagawa belt,central Shikoku,southwest Japan

New geochemical and Sr–Nd isotopic data for the Iratsu eclogite and surrounding metamorphic rocks of the Sanbagawa belt, Japan, show that, while the protoliths of the metamorphic rocks formed in a variety of tectonic settings, the Iratsu body represents a deeply subducted and accreted island arc. The igneous protoliths of eclogites and garnet amphibolites were probably generated from a mantle source that had components of both a depleted mantle modified by slab-released fluid (as seen in a negative Nb anomaly) and an enriched mantle, similar to that of ocean island basalts (OIB). Fractional crystallization modeling indicates that the protoliths of some garnet clinopyroxenites from the Iratsu body are cumulates from a basaltic magma that crystallized under high O₂ and H₂O fugacities in the middle to lower crust. The source characteristics and crystallization conditions suggest that the protoliths of the Iratsu rocks formed in an oceanic island arc. Quartz eclogites from the marginal zone of the Iratsu body have geochemical signatures similar to turbidites from the Izu–Bonin island arc (as seen in a negative Nb anomaly and a concave REE pattern). The protoliths might be volcaniclastic turbidites that formed in a setting proximal to the oceanic island arc. Geochemical and isotopic signatures of the surrounding mafic schists are similar to normal (N-) and enriched (E-) mid-ocean-ridge basalt (MORB), and distinct from the rocks from the Iratsu body. The protoliths of the mafic schists likely formed in a plume-influenced mid-ocean ridge or back-arc basin. Pelitic schists from the surrounding rocks and pelitic gneisses from the marginal zone of the Iratsu body have evolved, continental geochemical signatures (as seen in a negative ε_Nd(t) value (~?5)), consistent with their origin as continent-derived trench-fill turbidites.     

Quartz [0001]-axes preferred orientation, Bluff, New Zealand: Origin elucidated by grain-size measurements

Permian volcanic sediments at Bluff have been strained and thermally metamorphosed by Permian intrusives to metasediments of hornblende—hornfels facies. Quartz, which crystallised as a secondary mineral during metamorphism, has an unusual preferred orientation with c-axes either forming paired maxima in the plane containing the lineation (=maximum principal strain axis = direction of extension) and the perpendicular to schistosity (=minimum principal strain axis = shortening direction) or a broad maximum parallel to the lineation; the paired maxima are approximately 30° either side of the lineation. Some quartz grains are markedly elongate parallel to the lineation, and according to hypotheses of preferred orientation involving crystal plasticity, there should be some correlation between the shape of such grains and their c-axis orientations. Grain-size and shape analysis of Bluff quartz demonstrate that no such correlation exists; the analyses show that the preferred orientation results from oriented nucleation in the residual stress field immediately following the bulk straining of the rocks, with the distribution of c-axes as predicted by Kamb's hypothesis (1959). The time relationships of rock deformation, thermal metamorphism, and nucleation and growth of quartz are discussed.     

Gradients in fluid composition across metacarbonate layers of the Wepawaug Schist, Connecticut, USA

Metamorphic index mineral zones, pressure-temperature (P-T) conditions, and CO₂-H₂O fluid compositions were determined for metacarbonate layers within the Wepawaug Schist, Connecticut, USA. Peak metamorphic conditions were attained in the Acadian orogeny and increase from ~420 °C and ~6.5 kb in the low-grade greenschist facies to ~610 °C and ~9.5 kb in the amphibolite facies. The index minerals oligoclase, biotite, calcic amphibole, and diopside formed with progressive increases in metamorphic intensity. In the upper greenschist facies and in the amphibolite facies, prograde reaction progress is greatest along the margins of metacarbonate layers in contact with surrounding schists, or in reaction selvages bordering syn-metamorphic quartz veins. New index minerals typically appear first in these more highly reacted contact and selvage zones. It has been postulated that this spatial zonation of mineral assemblages resulted from infiltration, largely by diffusion, of water-rich fluids across lithologic contacts or away from fluid conduits like fractures. In this model, the infiltrating fluids drove prograde CO₂ loss and were derived from surrounding dehydrating schists or sources external to the metasedimentary sequence. The model predicts that significant gradients in the mole fraction of CO₂ (X_CO2 X_{CO_2 } ) should have been present during metamorphism, but new estimates of fluid composition indicate that differences in X_CO2 X_{CO_2 } preserved across layers or vein selvages were very small, ~0.02 or less. However, analytical solutions to the two-dimensional advection-dispersion-reaction equation show that only small fluid composition gradients across layers or selvages are needed to drive prograde CO₂ loss by diffusion and mechanical dispersion. These gradients, although typically too small to be measured by field-based techniques, would still be large enough to dominate the effects of fluid flow and reaction along regional T and P gradients. Larger gradients in fluid composition may have existed across some layers during metamorphism, but large gradients favor rapid reaction and would, therefore, seldom be preserved in the rock record. Most of the H₂O needed to drive prograde CO₂ loss probably came from regional dehydration of surrounding metapelitic schists, although H₂O-rich diopside zone conditions may have also required an external fluid component derived from syn-metamorphic intrusions or the metavolcanic rocks that structurally underlie the Wepawaug Schist.     

The Nigerian manganese-rich iron-formations and their host rocks—from sedimentation to metamorphism

This investigation deals with the Nigerian iron-formations and their host rocks and is based on about 560 mineral analyses (electron-microprobe) and 93 whole-rock analyses (64 iron-formations and 29 host rocks). The manganese-rich and Al-bearing iron-formations occurring in various schist belts of the northern and southern part of West-Nigeria consist of the magnetite-free silicate, the magnetite–silicate and the quartz-rich hematite facies.Iron-formations and host rocks originated from submarine-volcanogenic exhalations enriched in Fe, Mn and CO₂ and from Al₂O₃, SiO₂ and alkali (K₂O and Na₂O)-rich continental-derived pelitic to psammitic material. From these sources and their interaction and controlled by the volcanogenic activity, differently composed protoliths were deposited in the marine basin during the Birimian time. Subsequent metamorphism of greenschist to low amphibolite facies conditions during the Eburnian time led to the formation of the metaprotoliths of the magnetite–silicate (consisting of predominantly magnetite and quartz and subordinate of garnet and amphibole), the silicate facies (consisting of garnet, amphibole and rarely Mn-bearing ilmenite and quartz) and the metasediment phyllite. Garnets are predominantly almandine–spessartine solid solutions, whereas amphiboles are Mn and Ca-bearing grunerite–cummingtonite solid solutions. In the course of a second tectono-metamorphic event of Pan-African age, the magnetite–silicate facies iron-formation/phyllite association was transformed into the hematite facies and muscovite/biotite schists, whereas the silicate facies is characterized by extensive silicification features. The hematite facies and the silicified silicate facies are restricted to southern Nigeria where the second and heterogeneous tectono-metamorphic event is more pronounced (amphibolite facies conditions) than in northern Nigeria.The genesis, summarized as the metamorphic model, shows that the carbonate-rich (siderite, rhodochrosite and subordinate magnesite and calcite) protoliths were metamorphically transformed into the silicate and magnetite–silicate facies. The separation of Mn and Fe, leading to manganese-bearing iron-formations and iron-bearing manganese-formations was explained by varying pH-conditions, under which siderite (pH: 6.8–9.4) and rhodochrosite (pH: 9–11) precipitated.Similar to the Gunfit and Biwabik iron-formations of Minnesota, USA, the iron-formation of Bingi (Maru schist belt), now present in the form of the fayalite bearing silicate facies, was overprinted by contact metamorphism caused by a gabbro intrusion.     

Petrology of metamorphic rocks of almandine-amphibolite facies in Saidapuram-Podalakuru area,Nellore district,Andhra Pradesh,India

Summary Precambrian amphibolites and quartz-mica schists in the Saidapuram-Podalakuru area fall within the almandine-amphibolite facies of regional metamorphism. The analysed rocks represent metamorphosed basic igneous rocks. It is suggested that the quartz-muscovite-staurolite schists underwent metamorphism between 550° and 700° C at an average pressure of 7.2 kb; the quartz-muscovite (±biotite), hornblende-biotite (±garnet), and hornblende-garnet schists between 600°–700° C/7.5 kb; and the quartz-biotitekyanite schists between 650°–700° C/8 kb.

---

Petrologie der metamorphen Gesteine in Almandin-Amphibolit-Fazies im Gebiet von Saidapuram-Podalakuru, Distrikt Nellore, Andhra Pradesh, Indien

Zusammenfassung Präkambrische Amphibolite und Quarz-Glimmer-Schiefer im Gebiet von Saidapuram-Podalakuru gehören der Almandin-Amphibolit-Fazies an. Die analysierten Gesteine stellen metamorphe basische Erstarrungsgesteine dar. Die Quarz-Muskovit-Staurolith-Schiefer wurden bei 550°–700°C und einem durchschnittlichen Druck von 7,2 kb metamorph, die Quarz-Muskovit-(±Biotit-), die Hornblende-Biotit- (±Granat-) und die Hornblende-Granat-Schiefer bei 600°–700° C/7,5 kb, die Quarz-Cyanit-Schiefer bei 650°–700° C/8 kb.

---

---

With 6 Figures     

Chloritoid and barroisite-bearing pelitic schists from the eclogite unit in the Besshi district, Sanbagawa metamorphic belt

The Sanbagawa metamorphic rocks in the Besshi district, central Shikoku, are grouped into eclogite and noneclogite units. Chloritoid and barroisite-bearing pelitic schists occur as interlayers within basic schist in an eclogite unit of the Seba area in the Sanbagawa metamorphic belt, central Shikoku, Japan. Major matrix phases of the schists are garnet, chlorite, barroisite, paragonite, phengite, and quartz. Eclogite facies phases including chloritoid and talc are preserved only as inclusions in garnet. P–T conditions for the eclogite facies stage estimated using equilibria among chloritoid, barroisite, chlorite, interlayered chlorite–talc, paragonite, and garnet are 1.8 GPa/520–550 °C. Zonal structures of garnet and matrix amphibole show discontinuous growth of minerals between their core and mantle parts, implying the following metamorphic stages: prograde eclogite facies stage→hydration reaction stage→prograde epidote–amphibolite stage. This metamorphic history suggests that the Seba eclogite lithologies were (1) juxtaposed with subducting noneclogite lithologies during exhumation and then (2) progressively recrystallized under the epidote–amphibolite facies together with the surrounding noneclogite lithologies.

The pelitic schists in the Seba eclogite unit contain paragonite of two generations: prograde phase of the eclogite facies included in garnet and matrix phase produced by local reequilibration of sodic pyroxene-bearing eclogite facies assemblages during exhumation. Paragonite is absent in the common Sanbagawa basic and pelitic schists, and is, however, reported from restricted schists from several localities near the proposed eclogite unit in the Besshi district. These paragonite-bearing schists could be lower-pressure equivalents of the former eclogite facies rocks and are also members of the eclogite unit. This idea implies that the eclogite unit is more widely distributed in the Besshi district than previously thought.     

Development of fluid conduits in the auriferous shear zones of the Hutti Gold Mine, India: evidence for spatially and temporally heterogeneous fluid flow

The gold mineralization of the Hutti Mine is hosted by nine parallel, N–S trending, steeply dipping, 2–10 m wide shear zones, that transect Archaean amphibolites. The shear zones were formed after peak metamorphism during retrograde ductile D₂ shearing in the lower amphibolite facies. They were reactivated in the lower to mid greenschist facies by brittle–ductile D₃ shearing and intense quartz veining. The development of a S₂–S₃ crenulation cleavage facilitates the discrimination between the two deformation events and contemporaneous alteration and gold mineralization. Ductile D₂ shearing is associated with a pervasively developed distal chlorite–sericite alteration assemblage in the outer parts of the shear zones and the proximal biotite–plagioclase alteration in the center of the shear zones. D₃ is characterized by development of the inner chlorite-K-feldspar alteration, which forms a centimeter-scale alteration halo surrounding the laminated quartz veins and replaces earlier biotite along S₃. The average size of the laminated vein systems is 30–50 m along strike as well as down-dip and 2–6 m in width.Mass balance calculations suggest strong metasomatic changes for the proximal biotite–plagioclase alteration yielding mass and volume increase of ca. 16% and 12%, respectively. The calculated mass and volume changes of the distal chlorite–sericite alteration (ca. 11%, ca. 8%) are lower. The decrease in δ¹⁸O values of the whole rock from around 7.5‰ for the host rocks to 6–7‰ for the distal chlorite–sericite and the proximal biotite–plagioclase alteration and around 5‰ for the inner chlorite-K-feldspar alteration suggests hydrothermal alteration during two-stage deformation and fluid flow.The ductile D₂ deformation in the lower amphibolite facies has provided grain scale porosities by microfracturing. The pervasive, steady-state fluid flow resulted in a disseminated style of gold–sulfide mineralization and a penetrative alteration of the host rocks. Alternating ductile and brittle D₃ deformation during lower to mid greenschist facies conditions followed the fault-valve process. Ductile creep in the shear zones resulted in a low permeability environment leading to fluid pressure build-up. Strongly episodic fluid advection and mass transfer was controlled by repeated seismic fracturing during the formation of laminated quartz(-gold) veins. The limitation of quartz veins to the extent of earlier shear zones indicate the importance of pre-existing anisotropies for fault-valve action and economic gold mineralization.     

Cretaceous isochron ages from K–Ar and Ar / Ar dating of eclogitic rocks in the Tso Morari Complex, western Himalaya, India

The Tso Morari Complex, which is thought to be originally the margin of the Indian continent, is composed of pelitic gneisses and schists including mafic rock lenses (eclogites and basic schists). Eclogites studied here have the mineral assemblage Grt + Omp + Ca-Amp + Zo + Phn + Pg + Qtz + Rt. They also have coesite pseudomorph in garnet and quartz rods in omphacite, suggesting a record of ultrahigh-pressure metamorphism. They occur only in the cores of meter-scale mafic rock lenses intercalated with the pelitic schists. Small mafic lenses and the rim parts of large lenses have been strongly deformed to form the foliation parallel to that of the pelitic schists and show the mineral assemblages of upper greenschist to amphibolite facies metamorphism. The garnet–omphacite thermometry and the univariant reaction relations for jadeite formation give 13–21 kbar at 600 °C and 16–18 kbar at 750 °C for the eclogite formation using the jadeite content of clinopyroxene (X_Jd = 0.48).

Phengites in pelitic schists show variable Si / Al and Na / K ratios among grains as well as within single grains, and give K–Ar ages of 50–87 Ma. The pelitic schist with paragonite and phengite yielded K–Ar ages of 83.5 Ma (K = 4.9 wt.%) for paragonite–phengite mixture and 85.3 Ma (K = 7.8 wt.%) for phengite and an isochron age of 91 ± 13 Ma from the two dataset. The eclogite gives a plateau age of 132 Ma in Ar/Ar step-heating analyses using single phengite grain and an inverse isochron age of 130 ± 39 Ma with an initial ⁴⁰Ar / ³⁶Ar ratio of 434 ± 90 in Ar/Ar spot analyses of phengites and paragonites. The Cretaceous isochron ages are interpreted to represent the timing of early stage of exhumation of the eclogitic rocks assuming revised high closure temperature (500 °C) for phengite K–Ar system. The phengites in pelitic schists have experienced retrograde reaction which modified their chemistry during intense deformation associated with the exhumation of these rocks with the release of significant radiogenic ⁴⁰Ar from the crystals. The argon release took place in the schists that experienced the retrogression to upper greenschist facies metamorphisms from the eclogite facies conditions.     

京北琉璃庙地区变质杂岩变质变形特征

琉璃庙地区变质杂岩主要由变质上壳岩、变质深成侵入杂岩及其脉岩群组成.它们多数经韧性变形改造形成各种类型糜棱岩和构造片岩.研究表明,变质上壳岩原岩主要以钙碱性火山(熔)岩为主.本区变质杂岩经历了三期变质变形作用,即高角闪岩相区域变质作用形成大型复式同斜紧闭褶皱;绿帘角闪岩相动力变质作用及强烈的韧性变形,形成了以蓝闪石为特征的不同强度的糜棱岩带;绿片岩相动力变质作用和韧脆性变形作用.     

Optimal mixing properties of calcic and subcalcic amphiboles: application of Gibbs’ method to the Sanbagawa schists,SW Japan

Optimal activities of amphibole are obtained by means of a new application of Gibbs method to the assemblage amphibole-epidote-chlorite-plagioclase-quartz-water in the system SiO₂-Al₂O₃-Fe₂O₃-FeO-MgO-CaO-Na₂O-H₂O, and consequently T, P and X are derived from the amphibole chemistries via the differences relative to a set of the reference conditions. Amphibole solid solutions are modeled by the regular solution composed of seven end-members (tr-ts-ed-gln-mrb-fact-otr), and the optimal Margules parameters are obtained from hundreds of natural data sets of amphiboles in the Sanbagawa schists in the range 300–550 °C, 0.2–1.1 GPa. The temperatures obtained by Gibbs method are consistent with the temperatures by the hornblende-plagioclase thermometer with the absolute deviation of about 30 °C. The P-T conditions of calcic and subcalcic amphiboles are plotted in the stability fields of actinolite, hornblende, winchite, and barroisite of the greenschists and epidote-amphibolite facies conditions. Calculations for the representative zonings of amphiboles in the Sanbagawa schists suggest distinctive decompression P-T paths.Editorial responsibility: K. Hodges     

The Chinamora batholith, Zimbabwe: structure and emplacement-related magnetic rock fabric

The origin of dome-and-keel structural geometries in Archean granite–greenstone terrains appears to lack any modern analogues and is still poorly understood. The formation of these geometries is investigated using structural and anisotropy of magnetic susceptibility (AMS) data for the Chinamora batholith in Zimbabwe. The roughly circular-shaped batholith is surrounded by ca. 2.72–2.64 Ga greenstones. The batholith granitoid suites have been divided on the basis of their ages and fabric relationships into four distinct units: (i) banded basement gneisses; (ii) granodioritic gneisses; (iii) equigranular granites; and (iv) central porphyritic granites. In the gneissic granites a partial girdle (N–S) of poles to the magnetic foliation is developed that has been folded around a consistent, flat lying magnetic lineation plunging at shallow angles to the E or W. In the equigranular granites, the magnetic lineation generally plunges to the NW. The magnetic foliation has a variable strike, no clear trends can be distinguished. The AMS measurements of the porphyritic granite revealed a NW–SE striking foliation and showed subhorizontal magnetic lineations. The magnetic foliation is subparallel to the macroscopic foliation. Wall rocks are moderately inclined and show radial or concentric lineations, triaxial strain ellipsoids and kinematics that demonstrate off-the-dome sliding and coeval pluton expansion. The results of the observations do not point to a single emplacement process. Neither the observed structural data nor the magnetic fabric support a model envisaging spherically ‘ballooning’. It is argued that pluton diapirism played a major part in the formation of the fabrics in the gneisses, whereas the fabrics in the porphyritic granites reflect emplacement as laccolith-like sheets.     

Structural controls on gold mineralisation and the nature of related fluids of the Paiol gold deposit, Almas Greenstone Belt, Brazil

Chemical analyses suggest that the metavolcanic rocks of the Almas Greenstone Belt (AGB), Tocantins State, Brazil have a continental affinity, possibly related to a continental rift environment. They were metamorphosed to amphibolite facies during a regional tectono-metamorphic event (D_n), retrogressed to greenschist facies assemblages and then hydrothermally altered within dextral strike–slip shear zones (D_n+1). Fracture sets related to D_n+2 intersect S_n+1.The Paiol Gold Mine is one of several mineralised zones within metabasic and meta-intermediate rocks of the AGB. It exploits shoots of sulphide–Au–quartz mineralisation that occupy dilational zones approximately perpendicular to an elongation lineation (L_n+1) within mylonitic foliation S_n+1 (S_n+1=S within the S–C fabric). The dilational zones probably formed due to dextral displacement on sinistrally en echelon C surfaces. Minor amounts of gold may have been introduced or remobilised during D_n+2.Coexisting primary and pseudosecondary fluid inclusions in mineralised quartz veins from ore shoots comprise a high-salinity three-phase type (Type II) and a lower salinity two-phase type (Type I). Homogenisation temperatures for Type II inclusions range from 200 to 410 °C and Type I from 90 to 320 °C. The inclusions and their temperature ranges are believed to reflect heat exchange and some mixing between the two fluid types under relatively constant ambient temperatures, but variable (though broadly declining) fluid temperatures. This took place late in D_n+1 in conjunction with greenschist facies retrogression and localised hydrothermally induced metasomatism.