特大采空区上覆岩层地压与地表塌陷灾害监测研究

大红山铁矿采用无底柱分段崩落法开采形成了3个规模巨大的采空区,采空区上覆岩层移动与地表开裂塌陷将导致露天采场发生滚石地压灾害、井下采场产生空气冲击波次生地质灾害、地表与井下发生泥石流地质灾害等。针对上述问题,采取了多通道微震监测、非接触式岩移实时监测、基于手持式GPS仪的地表开裂范围监测和基于全站仪的地表沉降与水平移动监测的多种综合地压监测手段,对上覆岩层崩落高度、上覆岩层下沉变形量、地表开裂范围和地表沉降与水平移动等进行了监测,通过两年的监测获取了大量的监测数据,经分析表明,采空区上覆岩层崩落高度约在+1 090⁺1 060 m,上覆岩层+1 090 m平巷内观测点累计沉降量为1 350 mm,地表开裂范围位于以岩移角为75°划定的地表岩移范围内,地表测点最大累计沉降与水平移动量为1 779与948 mm,上覆岩层与地表的变形移动活动处于稳定渐进可控的状态,目前不会发生上述地压地质灾害。     

Effect of discontinuities on strata-movement problems in collieries: a review

Summary The influence of discontinuities on coal measures is manifested in the form of roof and side falls, caving of the roof and sometimes in subsidence of the ground surface. This review paper is confined to roof falls due to major geological discontinuities (such as faults, joints, cleats and bedding planes) and to possible ways and means to prevent these falls. Faults with an increased frequency of joints and cleats around them, slips and slickensides play a major role in coal-mine-roof instability. Joints and cleats running parallel to roadways and thinly bedded strata in the immediate roof area also contribute to strata-instability problems. A roof-fall index has been developed relating roof instability to the presence of geological discontinuities. Significant control of such instabilities is possible by orienting roadways across the geological discontinuities and by increasing the quality and density of the supports.     

程潮铁矿西区地表塌陷成因分析

以程潮铁矿西区为例,结合矿区的地层岩性和地下采矿情况,系统分析了金属矿山地下开采引起的地下水位变化及地表突发性塌陷的原因。研究表明：地表塌陷主要受地下采矿的影响;在一定的地质水文条件下,地表塌陷时采空区高度与采矿深度呈线型关系;地表变形大小和扩展范围与地层岩性息息相关;连续降雨能诱发地表塌陷。地表塌陷可被分为4个阶段：间歇性向上崩落阶段、裂缝连通及扩展阶段、疏干塌陷阶段及地表塌坑群形成阶段。采空区上部岩体垮落是非充分的,岩体空隙随时间的积累和岩体崩落动态变化,崩落呈间歇性、跳跃性地向上发展。岩体崩落的高度与地层岩性有关,岩体强度越小,完整性越差,每次崩落高度越小,总崩落高度越大。随着矿体的开采,漏斗状水位降形成。地下水位降低不仅与采空区的相对位置有关,还受岩性构造所控制。岩体裂隙的产生及发展贯通为地下水向下流动提供了有利通道,可溶岩不断被侵蚀,黏土及岩屑被地下水容冲刷带走易在地下形成隐伏空区。硬石膏整体变形破坏会造成地下水的突涌,在地下隐伏空区内产生瞬时高负压,诱发地表塌陷。     

Numerical Analysis of Block Caving-Induced Instability in Large Open Pit Slopes: A Finite Element/Discrete Element Approach

This paper addresses one of the most challenging problems in mining rock engineering—the interaction between block cave mining and a large overlying open pit. The finite element modeling/discrete element modeling (FEM/DEM) approach was utilized in the analysis of block caving-induced step-path failure development in a large open pit slope. The analysis indicated that there is a threshold percentage of critical intact rock bridges along a step-path failure plane that may ensure the stability of an open pit throughout caving operations. Transition from open pit to underground mining at Palabora mine presents an important example of a pit wall instability triggered by caving. Using combined FEM/DEM-DFN (discrete fracture network) modeling, it was possible to investigate the formation of a basal failure surface within an open pit slope as a direct result of cave mining. The modeling of Palabora highlighted the importance of rock mass tensile strength and its influence on caving-induced slope response.     

Numerical Simulation of Crack Evolution Mechanism and Subsidence Characteristics Effected by Rock Mass Structure in Block Caving Mining

Geotechnical and Geological Engineering - In the block caving mining, the significant rock mass deformation and surface subsidence will be formed with the continuous extraction of ore. However, the...     

柴北缘西大滩矿区煤系沉降-埋藏史研究

虽然沉降-埋藏史模拟技术在油气地质研究中被广泛使用,但是却很少用于煤田地质研究。随着高产高效矿井和深部煤炭资源开采的展开,对煤田地质研究的要求也越来越高。迫切需要把沉降-埋藏史模拟等新技术引入到煤田地质研究中。以柴达木盆地北缘西大滩矿区的研究为例,根据煤田地质和沉降、埋藏史模拟技术的特点．介绍了用于煤盆地构造演化研究的沉降-埋藏史模拟技术方法,并对西大滩矿区侏罗纪煤系的沉降-埋藏史模拟结果进行了分析。认为研究区的构造演化可划分为中生代阶段（J1-J3）和新生代阶段（E—N）,其间被白垩纪时期的盆地抬升剥蚀所分开。实例研究表明,沉降史和埋藏史模拟技术为盆地构造演化研究提供了定量或半定量的技术手段。     

Analysis of surface subsidence mechanism and regularity under the influence of seism and fault

Surface subsidence with various formation mechanisms possesses varied and complex influencing factors. Thus, studying surface subsidence mechanism and regularity under different special geological conditions is important in implementing disaster prevention and reduction programs. This paper focuses on goaf surface subsidence under the influence of the interaction between seism and fault, taking the Changping Expressway surface subsidence as the case study. In the full investigation of the engineering geological conditions in research area, the graphic method and numerical simulation method FLAC3D are adopted to study surface subsidence mechanism and regularity, after which the influence of seism and fault on surface subsidence is explored. The results show that the Changping Expressway surface subsidence is caused by earthquake-induced reactivation of the old goaf. Under the influence of geological fault, the maximum surface settlement significantly increased, the location of the maximum surface subsidence became close to the fault side, and the subsidence deformation showed an apparent discontinuity near the fault.     

煤矿地下水库岩体碎胀特性试验研究

鉴于岩石碎胀特性对于煤矿地下水库储水能力及地表沉陷的重要影响,选取神东矿区某矿22615面为工程背景,利用相似材料模型试验探究采空区垮落岩体应力及碎胀系数分布规律,明确垮落岩体应力-碎胀系数关系,并通过岩石压实试验进行验证,揭示饱水岩石压实特性。研究结果表明：沿采空区走向,边界附近老顶悬臂梁结构限制覆岩下沉,垮落岩体应力最低仅为0.32 MPa,碎胀系数最大达1.48;中间区域老顶结构失稳覆岩完全下沉,垮落岩体应力趋于1.5 MPa,碎胀系数降至1.09。沿采空区垂向,垮落岩体应力随高度负相关改变,而碎胀系数成正相关变化。无论沿采空区走向或垂向,垮落岩体碎胀系数与应力均满足负对数关系。与自然岩石相比,受载饱水岩石碎胀系数减幅更为明显,两者相差8.514%,为煤矿地下水库储水量和地表沉降量预测提供了基础理论依据。     

基于弹性薄板理论的煤矿采空区地表沉陷预测

采煤沉陷已成为煤矿区危害范围最广、影响程度最大、延续时间最长的一种工程地质灾害,在对赵各庄煤矿矿山地质环境调查的基础上,分析采空沉陷区地质灾害发育及成因特征,基于弹性薄板理论的规划开采区域采空区地表沉陷预计,可初步预计采空区地表沉陷特征并对其引发地质灾害进行预测。     

打通一煤矿西区开采对地表影响程度研究

从分析矿井西区的地形地貌、地质构造、地层、水文地质条件和开采技术条件入手,对W2701工作面开采后的地表裂缝、地表水体和地面塌陷进行了调查,推算煤层开采后的冒落带和裂隙带的高度分别为40．90m和140．22m,而该区煤层埋深为450-600m,说明在正常开采下,不会对地表产生影响。但随着开采强度的增大,煤系地层上覆岩层中一些未探明隐伏裂隙的存在,可能会间接影响到地表。据此提出了设立岩移观测站、建立预警系统、留设安全煤柱等预防措施。     

固体密实充填开采地表沉陷预计模型研究

为了实现对固体密实充填开采地表沉陷进行科学地预计,需要根据其覆岩结构形态演化规律和岩层移动特征建立完备的沉陷预计模型及其参数体系。相似材料模拟和钻孔窥视表明,固体密实充填开采覆岩形态以完整层状结构的弯曲带为主,覆岩仅在近顶板附近发育一定高度的断裂带,不发生垮落现象。岩层移动特征类似纵向载荷作用下层合板的弯曲变形,通过力学简化,基于层合板理论建立了固体密实充填开采地表沉陷预计模型。研究表明,固体密实充填开采地表沉陷形态仍可用概率积分模型进行描述,并进一步探讨了基于“等价釆高”的固体密实充填开采地表沉陷预计模型参数体系。最后将本文建立的地表沉陷预计模型应用于某工程实例,取得了良好的效果。     

矿床三维地质建模及储量估算——以丰村铅锌矿径口矿段为例

钦杭成矿带是我国最重要的成矿带之一,丰村铅锌矿位于钦杭成矿带南段庞西垌地区,是区内典型的沉积热液改造型矿床。依据现代成矿预测理论,结合已有的地形地质图、勘探线剖面图、钻孔数据等资料,运用三维地质建模技术建立了丰村铅锌矿径口矿段的地表模型、断裂模型、地层实体模型、矿体模型。在此基础上分别应用地质块段法和块体模型统计法进行了矿体的资源储量估算,并将两种估算结果进行了对比分析。结果表明,块体模型统计法比地质块段法应用范围更广,效果更精准,可以清晰表达矿体品位值变化特征,进而加深对矿体、矿床的空间分布规律的认识。同时,利用多元信息进行三维地质建模,可靠性高,可视化效果好。将传统的二维地质拓展到三维空间进行定位与定量化,有助于分析矿区地质构造特点与矿床成因,是现代寻找矿床的一种有效手段。     

苏锡常地区地面沉降及其若干问题探讨

地面沉降是苏锡常地区当前面临的最大地质灾害问题。本区的地面沉降具有两个特点:一是在时空上与 地下水开采密切相关;二是其形成主要为含水砂层的压密和顶、底板粘性土层的固结。针对地面沉降的研究多从 其宏观力学特性、水土耦合和建模等方面着手,而对土体在沉降变形过程中的结构变化研究不多,因而对土体在沉 降变形过程中的可逆和不可逆、非线性变形、弱透水层变形等的机理,还存在许多模糊认识。对此文章提出了相关 建议,主要包括:1)应系统地研究苏锡常地区第四纪土体各土层的细观和微观结构,弄清地面沉降区土体结构的演 化规律及其与抽、灌地下水、土体物性指标等之间的关系,建立土体沉降类型与土体结构演化之间的关系;2)应对 第四纪土体中的弱透水层开展系统研究;3)应从土体结构的角度,深入研究土体在排水和回灌过程中的可逆和不 可逆变形。     

莺歌海盆地构造演化与强烈沉降机制的分析和模拟

莺歌海盆地新生代发生了快速沉降, 盆内充填了最厚达17 km的沉积, 根据模拟实验, 印支地块或之上刚性地块的存在对莺歌海盆地的强烈沉降具有重要的贡献, 可能是造成莺歌海盆地裂陷期强烈沉降的重要原因之一.结合地质分析和物理模拟实验, 莺歌海盆地的演化大致可以分为以下4个主要阶段: 早期(42 Ma以前) 主要受到南海北部陆缘(主要是北部湾盆地) 裂解造成的右旋转换伸展作用的影响, 但影响范围较小, 主要为莺歌海盆地西北部和东部边界.42~21 Ma期间, 主要受控于印支地块左行走滑和顺时针旋转作用的影响, 莺歌海盆地在此期间发育了主体裂陷体系, 东侧受到右旋转换伸展应力场的叠加影响而导致沉降加强; 21~10.4 Ma期间, 受印支地块逐渐减弱直至停止的左行走滑作用的影响, 盆地西北部在21~15.5 Ma期间发生局部反转褶皱, 但盆地整体进入以热沉降为主的时期; 10.4 Ma以后, 盆地受华南地块沿红河断裂右旋走滑作用和5 Ma以后新一期热事件的影响.      

煤矿建设工程地质灾害危险性评估

煤矿区地质灾害类型多,诱发因素复杂,地质灾害危险性评估具有与众不同的特色。以鄂尔多斯某煤矿为例,运用MapGIS的叠加图层功能,对矿区的工程建设场地的适宜性进行了评价。现状评价认为,研究区的地质灾害为地面塌陷和裂缝,危险性小。运用采深与采厚比,预测评价区北部为塌陷区,南部为沉陷区,因9煤组埋藏浅于16煤组,故9煤组塌陷区面积大于16煤组。经过计算,开采最大影响半径为168.5m,因此,评估区范围为井田边界外扩170m。最大冒落带和导水裂隙带高度计算表明,研究区的最大冒落带高度和导水裂隙带高度都小于煤层顶板埋深,不会沟通地表,但区内的部分钻孔会沟通上覆岩层的含水层,存在危险性。综合分析认为,评估区西北部为地质灾害危险性中等区,东南部为危险性小区,并据此提出了留设保安煤柱,落实村庄搬迁等措施。     

山西阳泉矿区刘村采煤塌陷机理及数值模拟

选取山西阳泉矿区单煤层开采引发的强烈地面塌陷作为研究对象,在详细介绍刘村采煤塌陷所处地质环境背景及其发育变形特征的基础上,根据区域岩体工程地质特征,将其划分为12层岩组;运用关键层、复合关键层理论对采煤塌陷机理进行了分析,获取Hoek-Brown岩体力学参数;采用Flac5.0 Extrusion对刘村采煤塌陷坑进行了反演模拟。数值模拟反映各阶段采动裂缝在地表的发育分布情况并计算了最终沉降量,覆盖层裂缝自然修复周期为2个月,基岩裂缝自然修复周期为3个月;采动裂缝最终在平面上呈“θ”形,塌陷中心1和塌陷中心2最终沉降量分别达到4.5 m和4 m,塌陷面积是工作面面积的1.85倍。模拟结果与调查监测数据高度吻合,客观地反映了地表变形和深部覆岩塌陷的发展变化过程,为塌陷机理分析起到了帮助作用。该套岩体力学参数与模拟方法适用于阳泉矿区采煤塌陷精准预测。     

Analysis of sinkhole occurrences over abandoned mines using fuzzy reasoning: a case study

In Korea most of the old mine workings were worked with room and pillar method or sublevel caving method and today they possess great possibility of surface subsidence especially for shallow depth mines. In most of the cases, mine roadways, rooms and pillars are irregular in shape and information about the local geology is uncertain. For these reasons, it is difficult to standardize the estimating method of subsidence especially sinkhole type over abandoned mine area. This paper describes the application procedure for the fuzzy reasoning techniques to analyze the possibility of sinkhole occurrences over abandoned mines. This technique is implemented in software which can simplify the analysis procedure and present the possibility of sinkhole subsidence without having precise information about local geological/mining conditions. This technique has been applied to forecast sinkhole possibilities at Bonghwa site where a massive sinkhole has already been occurred.     

湖南省谭家山矿区开采地质灾害分析

煤矿开采所产生的地表沉降、开裂、塌陷等地质灾害,造成地表民房不同程度的损坏。为准确分析矿山开采对地表民房的损坏,从矿山开采造成地表沉降影响范围,矿山开采最大冒落高度与导水裂隙带高度,矿山开采引起地表最大水平移动值、最大曲率值、最大倾斜值等因素来研究分析。综合分析认为：引起地表民房损坏的主要原因一是地表民房正处在采动影响范围内;二是开采冒落带与裂隙带高度已经波及至地表,从而引起地表出现沉降与裂缝等现象,引发房屋开裂等损坏现象;三是煤矿采空区所产生的最大曲率值远远大于地表建筑允许变形值。该方法对研究煤矿开采造成地表民房损坏成因分析具有一定指导意义。     

Geotechnical consequences of the Newcastle Coal Measures rocks

This paper attempts to relate the lithology and fabric of four main groups of Newcastle Coal Measures rock types to their geotechnical properties and engineering behaviour. The four groups comprise: massive sandstone and conglomerate; claystones and tuffs; mudstone, shale and siltstone; and the coal itself. Although their geological relevance is primarily concerned with underground coal mining, these rocks are exposed at the surface across most of Newcastle and its suburbs, and are thus significant in terms of urban environmental geology. The key mining issues include longwall support design and panel layouts, caving and subsidence mechanisms, soft floors and stiff roofs, water inflows and pillar design. The urban geotechnical issues include landslides and rock falls, shallow abandoned mine workings, reactive and erodible soils, waste disposal and potential sources for geomaterials.     

Numerical Study of Mine Site Specific Multiseam Mining and Its Impact on Surface Subsidence and Chain Pillar Stress

This paper investigates various multiseam mining related parameters using mine site specific data and numerical simulations. Two important mining effects—subsidence and stress—are analysed for different possible mining layouts. A geological mine dataset has been used to generate a numerical model. The predicted surface subsidence magnitude and surface profile have been compared under different scenarios to assess potential options in multiseam mining strategies. The effects that seam separation distances, mining offset, panel layout and panel orientation each have on surface subsidence and chain pillar stress magnitude have been investigated. The numerical simulation shows that ascending or descending mining directions have little impact on controlling the surface subsidence in multiseam mining and predicted an almost identical maximum stress development at the chain pillars. Numerical simulations infer that the orientation of the top panels control the subsidence profile.