3-D upper crustal tomographic structure across the Vrancea seismic zone, Romania

The VRANCEA99 and VRANCEA2001 seismic refraction experiments are part of a multidisciplinary project to study the Eastern Carpathians in Romania. The objectives of these studies are intended to disclose a more detailed picture of the crustal and upper mantle structures above the seismically active Vrancea region. In this paper we provide additional constraints for the upper crustal structures of the area. The 1999 campaign consisted of a 320-km-long N–S profile and a 70-km-long E–W profile. The intersecting 2001 profile extended in E–W direction from the Hungarian border to the Black Sea. In order to enhance the model resolution, first arrival data from local crustal earthquakes were also included.This configuration allowed for the first time to derive a 3-D velocity model for the upper crust of the Romanian Carpathian Orogen, within a 115×235 km wide region, centred over the Vrancea seismic zone. The 3-D model reveals lateral velocity variations, which were not visible on the in-line interpretations. It allows us to distinguish between foreland platform areas, foreland basins and the Carpathian Orogen. Clear velocity differences between the foreland basins south and southeast of the Eastern Carpathians and the Focsani Basin further north indicate different pre-Miocene sedimentary compositions and geological evolutions of these foreland platforms. The involved Moesian and Scythian platforms are separated by the Trotus Fault system, which is observed as a velocity discontinuity. An upper crustal high-velocity zone, above the northern Vrancea seismic zone, could also be identified. This high-velocity zone is explained by a Middle Pliocene to Pleistocene E–W oriented out-of-sequence thrust of the crystalline basement, below the decollement of the flysch nappes.     

VRANCEA99—the crustal structure beneath the southeastern Carpathians and the Moesian Platform from a seismic refraction profile in Romania

The VRANCEA99 seismic refraction experiment is part of an international and multidisciplinary project to study the intermediate depth earthquakes of the Eastern Carpathians in Romania. As part of the seismic experiment, a 300-km-long refraction profile was recorded between the cities of Bacau and Bucharest, traversing the Vrancea epicentral region in NNE–SSW direction.

The results deduced using forward and inverse ray trace modelling indicate a multi-layered crust. The sedimentary succession comprises two to four seismic layers of variable thickness and with velocities ranging from 2.0 to 5.8 km/s. The seismic basement coincides with a velocity step up to 5.9 km/s. Velocities in the upper crystalline crust are 5.9–6.2 km/s. An intra-crustal discontinuity at 18–31 km divides the crust into an upper and a lower layer. Velocities within the lower crust are 6.7–7.0 km/s. Strong wide-angle PmP reflections indicate the existence of a first-order Moho at a depth of 30 km near the southern end of the line and 41 km near the centre. Constraints on upper mantle seismic velocities (7.9 km/s) are provided by Pn arrival times from two shot points only. Within the upper mantle a low velocity zone is interpreted. Travel times of a PLP reflection define the bottom of this low velocity layer at a depth of 55 km. The velocity beneath this interface must be at least 8.5 km/s.

Geologic interpretation of the seismic data suggests that the Neogene tectonic convergence of the Eastern Carpathians resulted in thin-skinned shortening of the sedimentary cover and in thick-skinned shortening in the crystalline crust. On the autochthonous cover of the Moesian platform several blocks can be recognised which are characterised by different lithological compositions. This could indicate a pre-structuring of the platform at Mesozoic and/or Palaeozoic times with a probable active involvement of the Intramoesian and the Capidava–Ovidiu faults. Especially the Intramoesian fault is clearly recognisable on the refraction line. No clear indications of the important Trotus fault in the north of the profile could be found. In the central part of the seismic line a thinned lower crust and the low velocity zone in the uppermost mantle point to the possibility of crustal delamination and partial melting in the upper mantle.     

Crustal structure of the Levant Basin, eastern Mediterranean

A seismic refraction/wide-angle reflection experiment was undertaken in the Levant Basin, eastern Mediterranean. Two roughly east–west profiles extend from the continental shelf of Israel toward the Levant Basin. The northern profile crosses the Eratosthenes Seamount and the southern profile crosses several distinct magnetic anomalies. The marine operation used 16 ocean bottom seismometers deployed along the profiles with an air gun array and explosive charges as energy sources. The results of this study strongly suggest the existence of oceanic crust under portions of the Levant Basin and continental crust under the Eratosthenes Seamount. The seismic refraction data also indicate a large sedimentary sequence, 10–14 km thick, in the Levant Basin and below the Levant continental margin. Assuming the crust is of Cretaceous age, this gives a fairly high sedimentation rate. The sequence can be divided into several units. A prominent unit is the 4.2 km/s layer, which is probably composed of the Messinian evaporites. Overlying the evaporitic layer are layers composed of Plio–Pleistocene sediments, whose velocity is 2.0 km/s. The refraction profiles and gravity and magnetic models indicate that a transition from a two layer continental to a single-layer oceanic crust takes place along the Levant margin. The transition in the structure along the southern profile is located beyond the continental margin and it is quite gradual. The northern profile, north of the Carmel structure, presents a different structure. The continental crust is much thinner there and the transition in the crustal structure is more rapid. The crustal thinning begins under western Galilee and terminates at the continental slope. The results of the present study indicate that the Levant Basin is composed of distinct crustal units and that the Levant continental margin is divided into at least two provinces of different crustal structure.     

Middle to late Miocene sequence stratigraphy of the Transylvanian Basin (Romania)

The history of Middle to Late Miocene evolution of the Transylvanian Basin was determined by the bordering Carpathian orogen evolution, the tectonic events being well recorded by the sedimentary history. The basin evolved in a back-arc setting, under a regional, compressional stress field. The major tectonic events produced during the Late Sarmatian and Post-Pannonian were related to the reactivation of the pre-Badenian fault systems. The Transylvanian Basin got uplifted after the Late Pannonian (? during the Pliocene), and at least 500 m of sedimentary cover was eroded.

Based on seismic and well-log interpretation, core and outcrop sedimentology, and microfauna, eight sequences were defined. The early Middle Miocene sequences are roughly synchronous to five 3rd order global sea-level cycles. Most of the recognized sequence boundaries are enhanced by regional tectonic events. The sedimentary evolution was also strongly influenced by salt-tectonics, active starting with the Late Sarmatian.

Two sequences were identified in the Lower Badenian deposits. The third sequence (late Early Badenian to early Mid Badenian) preserves information about deeper shelf settings. The lowstand of the following sequence was responsible for the deposition of the salt formation (late Mid Badenian), an important lithostratigraphic marker in the sedimentary record of the basin. In general, the Upper Badenian deposits (parts of the 4th and 5th sequences) belong to deep marine submarine fan systems. The Sarmatian (partially 5th, 6th and partially 7th sequences) was characterized by diverse salinity conditions, stretching from brackish to hypersaline, and by high tectonic instability, which induced several significant relative sea-level falls. During that time, deltaic (north) and fandeltaic (east) systems fed submarine fans, stacked between salt-related submarine heights (“channeled” deep-marine depocenters). Most of the Pannonian deposits (partially 7th and 8th sequences) belong to submarine fan systems, but shallower facies were also found in the western and eastern part of the basin.     

Near-vertical seismic reflection image using a novel acquisition technique across the Vrancea Zone and Foscani Basin, south-eastern Carpathians (Romania)

The DACIA PLAN (Danube and Carpathian Integrated Action on Process in the Lithosphere and Neotectonics) deep seismic sounding survey was performed in August–September 2001 in south-eastern Romania, at the same time as the regional deep refraction seismic survey VRANCEA 2001. The main goal of the experiment was to obtain new information on the deep structure of the external Carpathians nappes and the architecture of Tertiary/Quaternary basins developed within and adjacent to the seismically-active Vrancea zone, including the Focsani Basin. The seismic reflection line had a WNW–ESE orientation, running from internal East Carpathians units, across the mountainous south-eastern Carpathians, and the foreland Focsani Basin towards the Danube Delta. There were 131 shot points along the profile, with about 1 km spacing, and data were recorded with stand-alone RefTek-125s (also known as “Texans”), supplied by the University Texas at El Paso and the PASSCAL Institute. The entire line was recorded in three deployments, using about 340 receivers in the first deployment and 640 receivers in each of the other two deployments. The resulting deep seismic reflection stacks, processed to 20 s along the entire profile and to 10 s in the eastern Focsani Basin, are presented here. The regional architecture of the latter, interpreted in the context of abundant independent constraint from exploration seismic and subsurface data, is well imaged. Image quality within and beneath the thrust belt is of much poorer quality. Nevertheless, there is good evidence to suggest that a thick (10 km) sedimentary basin having the structure of a graben and of indeterminate age underlies the westernmost part of the Focsani Basin, in the depth range 10–25 km. Most of the crustal depth seismicity observed in the Vrancea zone (as opposed to the more intense upper mantle seismicity) appears to be associated with this sedimentary basin. The sedimentary successions within this basin and other horizons visible further to the west, beneath the Carpathian nappes, suggest that the geometry of the Neogene and recent uplift observed in the Vrancea zone, likely coupled with contemporaneous rapid subsidence in the foreland, is detached from deeper levels of the crust at about 10 km depth. The Moho lies at a depth of about 40 km along the profile, its poor expression in the reflection stack being strengthened by independent estimates from the refraction data. Given the apparent thickness of the (meta)sedimentary supracrustal units, the crystalline crust beneath this area is quite thin (< 20 km) supporting the hypothesis that there may have been delamination of (lower) continental crust in this area involved in the evolution of the seismic Vrancea zone.     

The crustal structure of the Guayana Shield, Venezuela, from seismic refraction and gravity data

We present results from a seismic refraction experiment on the northern margin of the Guayana Shield performed during June 1998, along nine profiles of up to 320 km length, using the daily blasts of the Cerro Bolívar mines as energy source, as well as from gravimetric measurements. Clear Moho arrivals can be observed on the main E–W profile on the shield, whereas the profiles entering the Oriental Basin to the north are more noisy. The crustal thickness of the shield is unusually high with up to 46 km on the Archean segment in the west and 43 km on the Proterozoic segment in the east. A 20 km thick upper crust with P-wave velocities between 6.0 and 6.3 km/s can be separated from a lower crust with velocities ranging from 6.5 to 7.2 km/s. A lower crustal low velocity zone with a velocity reduction to 6.3 km/s is observed between 25 and 25 km depth. The average crustal velocity is 6.5 km/s. The changes in the Bouguer Anomaly, positive (30 mGal) in the west and negative (−20 mGal) in the east, cannot be explained by the observed seismic crustal features alone. Lateral variations in the crust or in the upper mantle must be responsible for these observations.     

Constraints from Moho geometry and crustal thickness on the geodynamic origin of the Vrancea Seismogenic Zone (Romania)

Reprocessing of industry deep seismic reflection data (Ramnicu Sarat and Braila profiles) from the SE Carpathian foreland of Romania provides important new constraints on geodynamic models for the origin of the intermediate depth Vrancea Seismogenic Zone (VSZ). Mantle (70–200 km) earthquakes of the VSZ are characterized by high magnitudes (greater than 6.5), frequent occurrence rates (approximately 25 years), and confinement in a very narrow (30 × 70 × 200 km³) near vertical zone atypical for a Wadati–Benioff plane, located in front of the orogen. These two deep (20 s) seismic reflection profiles (70 km length across the foreland) reveal (1) a high-amplitude, gently east-dipping reflection across most of the section from what we interpret to be the Moho at  15 s (40–42 km) on the Ramnicu Sarat line to  16 s (47–48 km) on the Braila line, (2) a thick sedimentary cover increasing in thickness from east (1 s;  800 m) to west (7.5 s; 14 km), (3) an eastward increase in crustal thickness from 38 km (near VSZ) to  45 km, (4) seismic and topographic evidence for a newly imaged, possibly seismically active basement fault with a surface offset of 30 m observed on the Ramnicu Sarat line, (5) a lack of notable west-dipping structures in the crust and across the Moho, and (6) variable displacements on Peceneaga–Camena Fault of  5 km at Moho and  200 m at the basement–sedimentary cover contact.These observations appear to argue against recent models for west-dipping subduction of oceanic lithosphere at or in the vicinity of the Vrancea Seismogenic Zone given the lack of west-dipping fabrics in the lower crust and across the crust–mantle boundary. Consequently, one possible explanation for the geodynamic origin of VSZ could be partial delamination of the continental lithosphere in an intra-plate setting along a sub-horizontal lithospheric interface in the Carpathian hinterland that likely involves remnant lithospheric coupling between the crust and uppermost mantle in the foreland.     

Crustal constraints on the origin of mantle seismicity in the Vrancea Zone, Romania: The case for active continental lithospheric delamination

The Vrancea zone of Romania constitutes one of the most active seismic zones in Europe, where intermediate-depth (70–200 km) earthquakes of magnitude in excess of M_w = 7.0 occur with relative frequency in a geographically restricted area within the 110° bend region of the southeastern Carpathian orogen. Geologically, the Vrancea zone is characterized by (a) a laterally restricted, steeply NW-dipping seismogenic volume (30 × 70 × 200 km), situated beneath (b) thickened continental crust within the highly arcuate bend region of the Carpathian orocline, and (c) miscorrelation of hypocenters with the position of known or inferred suture zones in the Carpathian orogenic system. Geologic data from petroleum exploration in the Eastern Carpathians, published palinspastic reconstructions, and reprocessing of industry seismic data from the Carpathian foreland indicate that (1) crust of continental affinity extends significantly westward beneath the external thrust nappes (Sub-Carpathian, Marginal Folds, and Tarcau) of the Eastern Carpathians, (2) Cretaceous to Miocene strata of continental affinity can be reconstructed westward to a position now occupied by the Transylvanian basin, and (3) geologic structure in the Carpathian foreland (including the Moho) is sub-horizontal directly to the east and above the Vrancea seismogenic zone. Taken together, these geologic relationships imply that the Vrancea zone occupies a region overlain by continental crust and upper mantle, and does not appear to originate from a subducted oceanic slab along the length of the Carpathian orogen. Accordingly, the Vrancea zone appears to potentially be an important place to establish evidence for active lithospheric delamination.     

宽角反射、折射地震数据与重力数据综合解释龙门山及邻近地区地壳结构

青藏高原东部的隆升机制一直都是地学界的研究热点,研究学者们提出和发展了多种岩石圈变形模型,而存在多种模型的主要原因之一是对青藏高原东部地壳及岩石圈结构认识不足。本文主要针对SinoProbe-02项目横跨龙门山断裂带、全长400多公里的宽角、折射地震数据及重力数据进行联合反演和综合解释。研究结果表明,龙门山及邻近地区地壳结构可明确划分为上地壳、中地壳和下地壳。上地壳上层为沉积层,龙门山断裂带以西大部分区域被三叠纪复理岩覆盖,而在龙日坝断裂与岷江断裂之间出现了密度为2.7g/cm³的高速异常体;向东靠近龙门山地区,沉积层厚度逐渐减薄。中地壳速度变化不均一,而且变形强烈;若尔盖盆地和龙门山断裂带下方出现明显低速带;中地壳在龙门山西侧厚度加厚,在岷江断裂下方和四川盆地靠近龙门山断裂带地区附近厚度达到最大。莫霍面整体深度从东往西增厚,最厚可达56 km。本次研究得到的地壳结构和密度分布分析结果表明现有的地壳厚度和物质组成不足以支撑龙门山及邻近地区目前所达到的隆升高度,因此四川盆地刚性基底西缘因挤压作用产生的弯曲应力也是该地区抬升的重要条件之一。     

3-D crustal structure of the extensional Granada Basin in the convergent boundary between the Eurasian and African plates

Three-dimensional P and S wave velocity models of the crust under the Granada Basin in Southern Spain are obtained with a spatial resolution of 5 km in the horizontal direction and 2 to 4 km in depth. We used a total of 15407 P and 13704 S wave high-quality arrival times from 2889 local earthquakes recorded by both permanent seismic networks and portable stations deployed in the area. The computed P and S wave velocities were used to obtain three-dimensional distributions of Poisson's ratio (σ) and the porosity parameter (V_p×V_s). The 3-D velocity images show strong lateral heterogeneities in the region. Significant velocity variations up to ±7% in P and S velocities are revealed in the crust below the Granada Basin. At shallow depth, high-velocity anomalies are generally associated with Mesozoic basement, while the low-velocity anomalies are related to the neogene sedimentary rocks. The south–southeastern part of the Granada Basin exhibits high σ values in the shallowest layers, which may be associated with saturated and unconsolidated sediments. In the same area, V_p×V_s is high outside the basin, indicating low porosity of the mesozoic basement. A low-velocity zone at 18-km depth is found and interpreted as a weak–ductile crust transition that is related to the cut-off depth of the seismic activity. In the lower crust, at 34-km depth, a clear slow V_p and V_s anomalous zone may indicate variations in lithology and/or with the rigidity of the lower crust rocks.     

Anomalous crustal and lithospheric mantle structure of southern part of the Vindhyan Basin and its geodynamic implications

Tectonically active Vindhyan intracratonic basin situated in central India, forms one of the largest Proterozoic sedimentary basins of the world. Possibility of hydrocarbon occurrences in thick sediments of the southern part of this basin, has led to surge in geological and geophysical investigations by various agencies. An attempt to synthesize such multiparametric data in an integrated manner, has provided a new understanding to the prevailing crustal configuration, thermal regime and nature of its geodynamic evolution. Apparently, this region has been subjected to sustained uplift, erosion and magmatism followed by crustal extension, rifting and subsidence due to episodic thermal interaction of the crust with the hot underlying mantle. Almost 5–6 km thick sedimentation took place in the deep faulted Jabera Basin, either directly over the Bijawar/Mahakoshal group of mafic rocks or high velocity-high density exhumed middle part of the crust. Detailed gravity observations indicate further extension of the basin probably beyond NSL rift in the south. A high heat flow of about 78 mW/m² has also been estimated for this basin, which is characterized by extremely high Moho temperatures (exceeding 1000 °C) and mantle heat flow (56 mW/m²) besides a very thin lithospheric lid of only about 50 km. Many areas of this terrain are thickly underplated by infused magmas and from some segments, granitic–gneissic upper crust has either been completely eroded or now only a thin veneer of such rocks exists due to sustained exhumation of deep seated rocks. A 5–8 km thick retrogressed metasomatized zone, with significantly reduced velocities, has also been identified around mid to lower crustal transition.     

Orogenic structure of the Eastern Alps, Europe, from TRANSALP deep seismic reflection profiling

The TRANSALP Group, comprising of partner institutions from Italy, Austria and Germany, acquired data on a 340 km long deep seismic reflection line crossing the Eastern Alps between Munich and Venice. Although the field work was split into four campaigns, between fall 1998 and summer 2001, the project gathered for the first time a continuous profile across the Alps using consistent field acquisition and data processing parameters. These sections span the orogen itself, at its broadest width, as well as the editor Fred Davey and the two adjacent basins. Vibroseis and explosion data, complementary in their depth penetration and resolution characteristics, were obtained along with wide-angle and teleseismic data. The profile shows a bi-vergent asymmetric structure of the crust beneath the Alpine axis which reaches a maximum thickness of 55 km, and 80–100 km long transcrustal ramps, the southward dipping ‘Sub-Tauern-Ramp’ and the northward-dipping ‘Sub-Dolomites-Ramp’. Strongly reflective patterns of these ramps can be traced towards the north to the Inn Valley and towards the south to the Valsugana thrust belt, both of which show enhanced seismicity in the brittle upper crust. The seismic sections do not reveal any direct evidence for the presence of the Periadriatic Fault system, the presumed equivalent to the Insubric Line in the Western Alps. According to our new evolutionary model, the Sub-Tauern-Ramp is linked at depth with remnants of the subducted Penninic Ocean. The ‘crocodile’-type model describes an upper/lower crustal decoupling and wedging of both the European and the Adriatic–African continents.     

The Levantine Basin—crustal structure and origin

The origin of the Levantine Basin in the Southeastern Mediterranean Sea is related to the opening of the Neo-Tethys. The nature of its crust has been debated for decades. Therefore, we conducted a geophysical experiment in the Levantine Basin. We recorded two refraction seismic lines with 19 and 20 ocean bottom hydrophones, respectively, and developed velocity models. Additional seismic reflection data yield structural information about the upper layers in the first few kilometers. The crystalline basement in the Levantine Basin consists of two layers with a P-wave velocity of 6.0–6.4 km/s in the upper and 6.5–6.9 km/s in the lower crust. Towards the center of the basin, the Moho depth decreases from 27 to 22 km. Local variations of the velocity gradient can be attributed to previously postulated shear zones like the Pelusium Line, the Damietta–Latakia Line and the Baltim–Hecateus Line. Both layers of the crystalline crust are continuous and no indication for a transition from continental to oceanic crust is observed. These results are confirmed by gravity data. Comparison with other seismic refraction studies in prolongation of our profiles under Israel and Jordan and in the Mediterranean Sea near Greece and Sardinia reveal similarities between the crust in the Levantine Basin and thinned continental crust, which is found in that region. The presence of thinned continental crust under the Levantine Basin is therefore suggested. A β-factor of 2.3–3 is estimated. Based on these findings, we conclude that sea-floor spreading in the Eastern Mediterranean Sea only occurred north of the Eratosthenes Seamount, and the oceanic crust was later subducted at the Cyprus Arc.     

Reflection–refraction seismics in the Gulf of Corinth: hints at deep structure and control of the deep marine basin

The Gulf of Corinth is a natural laboratory for the study of seismicity and crustal deformation during continental extension. Seismic profiling along its axis provides a 24-fold normal-incidence seismic reflection profile and wide-angle reflection–refraction profiles recorded by sea-bottom seismometers (OBS) and land seismometers. At wide-angle incidence, the land receivers document the Moho at 40-km depth under the western end of the Gulf north of Aigion, rising to 32-km depth under the northern coast in the east of the Gulf. Both refraction and normal-incidence reflection sections image the basement under the deep marine basin that has formed by recent extension. The depth to the base of the sedimentary basin beneath the Gulf, constrained by both methods, is no more than 2.7 km, with 1 km of water underlain by no more than 1.7 km of sediment, less than what was expected from past modeling of uplift of the south coast in the East of the Gulf. Unlike the flat sea-bottom, the basement and sedimentary interfaces show topography along this axial line. Several deeps are identified as depocenters, which suggest that this axial line is not a strike line to the basin. It appears instead to be controlled by several faults, oblique to the S60°E overall trend of the south coast of the Gulf, their more easterly strikes being consistent with the instantaneous direction of extension measured by earthquake slip vectors and by GPS.     

Deep seismic refraction and gravity crustal model and tectonic deformation in Tocantins Province, Central Brazil

Interpretation of seismic refraction data in the central sector of Tocantins Province, Central Brazil, has produced a seismic crustal model with well-defined upper, intermediate, and lower crust layers having smooth velocity gradient in each layer. The depths to Moho vary from 32 to 43 km, and mean crustal P velocity varies from 6.3 km/s, beneath Goiás magmatic arc on the western side, to 6.4 km/s, below Goiás massif in the central portion and the foreland fold-and-thrust belt on the eastern side. The behaviour of the lower crust layer allows an improved understanding of regional gravimetric features of the central and northern sectors of Tocantins Province and suggests subduction of the Amazon plate in Central Brazil. In the southeastern sector, the refraction experiment resulted in the detection of a thinner crust (38 km) below Brasília fold belt and a thicker crust (41 km) below Paraná basin and São Francisco craton (42 km). The upper crust beneath Paraná Basin is around 20 km thick, whereas it is less than 10 km thick below the craton. These results bring new insights into the geological history of the central and southeastern sectors of Tocantins Province.Gravimetric measurements in the central sector of Tocantins Province delineate a high and a low anomaly separated by a steep gradient with a NE direction. The axis of the gradient seems to bend still further to NE in the northern sector of that province, whereas the gravimetric high continues northwards, defining a separation between them. This suggests that those features belong to different tectonic processes that occurred during Tocantins Province orogenesis. The gravimetric model, which incorporates seismically resolved structure beneath Tocantins Province, better matches the observed gravimetric data.Although tectonic movements have only been monitored with high-precision GPS for short time interval (1999–2001), the results suggest observable deformations. The main seismicity of Central Brazil, the Goiás–Tocantins seismic belt, seems to be spatially associated with the large gravimetric high anomaly and with the observed tectonic deformation.     

Seismic velocity structure of a large mafic intrusion in the crust of central Denmark from project ESTRID

The origin of regional sedimentary basins is being investigated by the ESTRID project (Explosion Seismic Transects around a Rift In Denmark). This project investigates the mechanisms of the formation of wide, regional basins and their interrelation to previous rifting processes in the Danish–Norwegian Basin in the North Sea region. In May 2004 a 143 km long refraction seismic profile was acquired along the strike direction of a suspected major mafic intrusion in the crust in central Denmark. The data confirms the presence of a body with high seismic velocity (> 6.5 km/s) extending from a depth of  10–12 km depth into the lower crust. There is a remarkable Moho relief between 27 and 34 km depth along this new along-strike profile as based on ray-tracing modelling of PmP reflections. The lack of PmP reflections at a zone of very high velocity in the lowest crust (7.3–7.5 km/s) suggests a possible location of a feeder channel to the batholith. The presence of volcanic rocks of Carboniferous–Permian age above the intrusion (mafic batholith) suggests a similar age of the intrusion. An older obliquely crossing profile and two new fan profiles deployed perpendicular to the main ESTRID profile, show that the batholith is about 30–40 km wide. The existence of this large mafic batholith supports the hypothesis that the origin of the Danish–Norwegian Basin is related to cooling and contraction after intrusion of large amounts of mafic melts into the crust during the late Carboniferous and early Permian. The data and interpretations from project ESTRID will form the basis for subsidence modelling. Tentatively, we interpret the formation of the Danish–Norwegian Basin as a thermal subsidence basin, which developed after widespread rifting of the region.     

Crustal-scale seismic profiles across Taiwan and the western Philippine Sea

We have used combined onshore and offshore wide-angle seismic data sets to model the velocity structure of the Taiwan arc–continent collision along three cross-island transects. Although Taiwan is well known as a collisional orogen, relatively few data have been collected that reveal the deeper structure resulting from this lithospheric-scale process. Our southern transect crosses the Hengchun Peninsula of southernmost Taiwan and demonstrates characteristics of incipient collision. Here, 11-km-thick, transitional crust of the Eurasian plate (EUP) subducts beneath a large, rapidly growing accretionary prism. This prism also overrides the N. Luzon forearc to the east as it grows. Just west of the arc axis there is an abrupt discontinuity in the forearc velocity structure. Because this break is accompanied by intense seismicity, we interpret that the forearc block is being detached from the N. Luzon arc and Philippine Sea plate (PSP) at this point. Our middle transect illustrates the structure of the developing collision. Steep and overturned velocity contours indicate probable large-scale thrust boundaries across the orogen. The leading edge of the coherent PSP appears to extend to beneath the east coast of Taiwan. Deformation of the PSP is largely limited to the remnant N. Luzon arc with no evidence of crustal thickening to the east in the Huatung basin. Our northern transect illustrates slab–continent collision—the continuing collision of the PSP and EUP as the PSP subducts. The collisional contact is below 20 km depths along this transect NE of Hualien. This transect shows elements of the transition from arc–continent collision to Ryukyu arc subduction. Both of our models across the Central Range suggest that the Paleozoic to Mesozoic basement rocks there may have been emplaced as thick, coherent thrust sheets. This suggests a process of partial continental subduction followed by intra-crustal detachment and buoyancy-aided exhumation. Although our models provide previously unknown structural information about the Taiwan orogen, our data do not define the deepest orogenic structure nor the structure of western Taiwan. Additional seismic (active and passive), geologic, and geodynamic modeling work must be done to fully define the structure, the active deformation zones, and the key geodynamic process of the Taiwan arc–continent collision.     

2-D seismic tomographic and ray tracing modelling of the crustal structure across the Sudetes Mountains basing on SUDETES 2003 experiment data

The seismic data obtained during SUDETES 2003 experiment are analysed, and detailed crustal structure for profiles S02, S03 and S06 is presented using three different 2-D techniques: (1) “smooth” tomography of refracted waves travel times, (2) ray tracing of reflected and refracted waves, and (3) joint velocity and depth of reflector tomographic inversion. In spite of different interpretation techniques used, the models of the crustal structure show common characteristic features. The low velocity (V_p < 4 km/s) sedimentary layer was documented in the northeastern part of the study area. The topmost basement has in general a velocity of 5.8–6.0 km/s, and velocities at ca. 20 km depth are 6.15–6.25 km/s. The strong reflecting boundaries were found at 20–23 and 25–28 km depth with a velocity contrast about 0.4 km/s, and the highest velocities in the lowermost crust are 6.8–7.2 km/s. In general, the crust of the Bohemian Massif is slightly thicker (33–35 km) than in the northern part of the area. Velocities beneath Moho are relatively low, of 7.95 km/s. On the basis of well recorded reflected waves, mantle reflectors were discovered in the depth interval ca. 40–70 km. Apart of new results for the geology and tectonics of the area, some conclusion could be made about different techniques used. In the 2-D case the “clasical” ray tracing method with using all correlated phases gives the most adequate model of the structure, because of full, manual control of the model creation. The “smooth” first arrival travel times tomography, although very fast, is not satisfactory enough to describe the complex structure. So, the best candidate in 3-D case seems to be travel time tomography for both refracted and reflected waves in multi-layers models.     

Configuration of subducting Philippine Sea plate and crustal structure in the central Japan region

A seismic experiment with six explosive sources and 391 seismic stations was conducted in August 2001 in the central Japan region. The crustal velocity structure for the central part of Japan and configuration of the subducting Philippine Sea plate were revealed. A large lateral variation of the thickness of the sedimentary layer was observed, and the P-wave velocity values below the sedimentary layer obtained were 5.3–5.8 km/s. P-wave velocity values for the lower part of upper crust and lower crust were estimated to be 6.0–6.4 and 6.6–6.8 km/s, respectively. The reflected wave from the upper boundary of the subducting Philippine Sea plate was observed on the record sections of several shots. The configuration of the subducting Philippine Sea slab was revealed for depths of 20–35 km. The dip angle of the Philippine Sea plate was estimated to be 26° for a depth range of about 20–26 km. Below this depth, the upper boundary of the subducting Philippine Sea plate is distorted over a depth range of 26–33 km. A large variation of the reflected-wave amplitude with depth along the subducting plate was observed. At a depth of about 20–26 km, the amplitude of the reflected wave is not large, and is explained by the reflected wave at the upper boundary of the subducting oceanic crust. However, the reflected wave from reflection points deeper than 26 km showed a large amplitude that cannot be explained by several reliable velocity models. Some unique seismic structures have to be considered to explain the observed data. Such unique structures will provide important information to know the mechanism of inter-plate earthquakes.     

Seismic investigation of near-surface geological structure in the Paducah, Kentucky, area: application to earthquake hazard evaluation

Seismics method were used to evaluate shallow geological conditions at 33 sites in the vicinity of Paducah, Kentucky. A combined set of P- and S-wave seismic refraction and reflection soundings were used, in addition to local borehole information, to produce structure maps of (1) a shallow (< 30 m deep) horizon believed to represent an unconformity surface at the top of the Eocene, and (2) the Paleozoic bedrock surface (< 85 to > 160 m deep). Shear-wave velocity contrasts across the shallow unconformity were generally 2-to-1 while the contrast at the top of the Paleozoic bedrock exceeds 5-to-1. These seismic boundaries have been determined to be very important in modelling and interpreting earthquake ground motion amplification in the Paducah area. The quality and accuracy of the data, and the cost effective nature of the methods, suggest that other communities in areas at risk to damage from seismic activity, with foundation conditions comparable to Paducah, might benefit from similar characterization in order (1) to identify seismically hazardous, near-surface, geological conditions, and (2) to develop geological models that could be used in computer simulations of site response.