基于华北区域地震活动性分布的地震危险性评价模型

采用了分布式地震活动性模型. 该模型无需潜在震源区划分,同时简化了地震危险性概率分析方法. 根据破坏性地震目录建立了3个地震活动性模型,利用高斯光滑函数获得了华北区域内的a值分布特征,使用3种典型的衰减模型,分别计算了50年内超越概率10%, 5%和2%的地震动峰值加速度分布. 其分析结果显示了峰值加速度分布特征与我国第四代区划图大体一致,特定地震活动区（太原、 石家庄等地区）的峰值加速度略高于第四代区划图的结果,而这种峰值加速度分布特征与该地区较高的地震活动性特征是一致的. 概率危险性曲线结果表明,唐山、太原和北京等地区的潜在地震危险性比华北区域内其它城市高.      

以空间光滑的地震活动性模型为空间分布函数的地震危险性分析方法

根据华北地区的地震目录,建立了4个空间光滑的地震活动性模型,并以这些模型为空间分布函数,将华北地震区每个地震带的地震年发生率分配到空间格点中,计算这一地区的地震危险性．结果表明,采用仪器记录地震计算得到的地震活动性模型和地震危险性结果能够反映华北地区现今的地震活动水平和地震危险性水平,符合人们对现今华北地区地震危险性的认识;采用历史破坏性地震（Mge;4.7）计算的地震活动性模型和地震危险性结果,较好地反映了华北地区中强地震活动区的地震危险性水平;以地震应变计算地震活动率,并根据点椭圆模型和线椭圆模型计算得到的地震活动性模型,能够较好地反映大地震的活动水平和空间构造特征．将根据4个模型计算得到的50年超越概率10%峰值加速度（PGA）分布加权平均,得到综合的华北地区PGA分布,并将该PGA分布与根据《中国地震动参数区划图》中综合潜源方案计算得到的50年超越概率10%的PGA分布做了比较,发现二者无本质差别,均能反映华北地震区的地震危险性水平．当然,二者也具有一定的差异:前者计算得到的符合PGAge;100 cm/s2条件的区域面积明显要比后者的大,而符合PGAge;250 cm/s2条件的区域面积则比后者的要小. 这主要是由于潜在震源区类型和空间分布函数不同造成的．      

Seismic hazard analysis for a spatial linearly distributed system

The models currently used in the seismic evaluation of important projects, microzoning and seismic zonation are all for site. Although seismic hazard analysis have been done for many sites in seismic zonation and microzoning, relationship among sites is not considered in the final results. Studies show that it is impossible to get total hazard for specific area from the results of the hazard analysis of sites. So, when we consider the total seismic hazard of a specific spatial distributed system, methods for site are not enough. Author discussed the relation and the difference between system hazard and segments hazard which form the system and proposed a seismic hazard analysis model taking spatial linear distributed series and parallel system as an example. In aseismic design and earthquake disaster prevention decision, not only the seismic hazard of segments of the system but also the total seismic hazard of the system should be considered. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 347–352, 1993.     

考虑地震构造背景的地震活动性参数光滑方法在地震危险性概率评价中的应用

本文选取华北地震区作为研究区域,尝试利用空间光滑活动模型进行地震危险性评估.首先对研究区域进行划分网格,依据地震构造和地震空间分布特征建立地震构造模型,确定构造区特征参数(b值、M0、Mu、断层方位角及M-L关系等).采用考虑了地震构造背景的椭圆光滑过程的地震活动参数模型,计算各网格点的地震发生率.并利用网格源的地震危险性概率评价方法,由不同输入地震目录通过综合加权得到该区域50年超越概率10％的加速度峰值区划结果.该方法充分体现了地震活动的空间非均一性,尤其适用于发震构造不甚清晰的中强地震可能造成的地震危险性,避免了常规潜在震源区的划分.且评价方法简单快捷,为地震区划以及重大工程地震安全性评价工作提供了新的技术方法.     

中国大陆基于BPT模型的时间相依地震危险性分析

概率地震危险性分析是地震区划图编制、重大工程场地地震安全性评估以及地震风险管理等领域的重要依据,地震时间活动性模型则是概率地震危险性分析的主要理论基础.本研究中基于布朗过程时间（Brownian passage time（BPT））模型,计算了不同情况下中国大陆特征地震震源区时间相依的地震发生率,采用概率地震危险性计算方法,选择合适的地震动模型,评估了中国大陆地区时间相依的地震危险性,并与基于泊松模型的地震危险性做了比较.结果表明,时间相依的地震活动特征对概率地震危险性具有显著影响,在那些地震离逝时间相对较长,离逝率较大（大于1）的震源区,时间相依的地震危险性结果相较于基于泊松模型的地震危险性结果显著增大,增大幅度最大可达50%以上.相反,在那些刚发生地震不久,地震离逝时间较短的震源区,时间相依的地震危险性结果相较于泊松模型显著减小,减小幅度最大可达50%左右.地震复发间隔的变异系数对地震危险性结果也有显著影响,选择合适的变异系数对时间相依地震危险性分析十分重要,后续应该加强对地震复发间隔不确定性的研究.研究结果还表明,时间相依的地震活动特征对不同超越概率下的地震危险性结果的影响是一致的,不随超越概率水平的变化而变化.本文研究结果对地震风险管理、地震保险以及相关防震减灾政策的制定等方面具有重要的应用价值.

     

Time-dependent probabilistic seismic hazard assessment for Taiyuan,Shanxi Province,China, and the surrounding area

Taiyuan is a city in Shanxi Province, China, and possesses serious seismic hazard. In this study, we constructed a time-dependent seismic hazard model for Taiyuan and the surrounding area based on several major-earthquake seismogenic structures for which historical and paleoseismic event data were available. With the time-dependent model, we calculated the distribution of peak ground acceleration with 10% probability of exceedance in the next 50 years in Taiyuan and the surrounding area, and compared the results with those calculated using the time-independent model. The results showed that the entire area around Taiyuan has a higher seismic hazard with the time-dependent model than that with the time-independent model. The Jiaocheng and Hengshan faults have much higher seismic hazard. Applying the model only to Taiyuan showed that the city has higher seismic hazard with the time-dependent model than that with the time-independent model. In particular, in the western part of Taiyuan, the seismic hazard is quite high because of the proximity of the area to the Jiaocheng Fault.     

Estimation of Tsunami Hazard in New Zealand due to South American Earthquakes

We develop a probabilistic model for estimating the tsunami hazard along the coast of New Zealand due to plate-interface earthquakes along the South American subduction zone. To do this we develop statistical and physical models for several stages in the process of tsunami generation and propagation, and develop a method for combining these models to produce hazard estimates using a Monte-Carlo technique. This process is largely analogous to that used for seismic hazard modelling, but is distinguished from it by the use of a physical model to represent the tsunami propagation, as opposed to the use of empirical attenuation models for probabilistic seismic hazard analysis.     

湖南地区分布式地震活动性模型在PSHA中的应用研究

本文采用了空间光滑地震活动性模型,该模型无需潜在震源区划分,同时发展了概率地震危险性分析新方法。根据三种地震目录资料建立了三种地震活动性模型,利用高斯光滑函数获得了湖南区域内的比值分布特征,使用了两种典型的衰减模型,计算了50年内超越概率10％的地震动峰值加速度（PGA）分布。其分析结果显示PGA分布特征与中国地震动参数区划图大体一致,部分区域PGA提高,PGA达0．05g的区域显著扩大,其中包括邵阳、湘潭、吉首、怀化等重要城市,而这种PGA分布特征与该地区地震活动性特征是一致的。概率危险性曲线的结果表明常德等地区的潜在地震危险性比湖南区域内其他城市高。表明此模型用于地震危险性计算中是简便易行的,且具有较高的精度。尤其对于地质和地震构造信息缺乏的弱震区和中强震区,该方法作为替代方法并有着广泛的应用价值。     

青藏高原东北缘地震活动性广义帕累托模型的全域敏感性分析

基于广义帕累托分布构建地震活动性模型,因其输入参数取值难以避免不确定性,导致依据该模型所得的地震危险性估计结果具有不确定性。鉴于此,本文选取青藏高原东北缘为研究区,提出了基于全域敏感性分析的地震危险性估计的不确定性分析流程和方法。首先,利用地震活动性广义帕累托模型,进行研究区地震危险性估计;然后,选取地震记录的起始时间和震级阈值作为地震活动性模型的输入参数,采用具有全域敏感性分析功能的E-FAST方法,对上述两个参数的不确定性以及两参数之间的相互作用对地震危险性估计不确定性的影响进行定量分析。结果表明：地震危险性估计结果（不同重现期的震级重现水平、震级上限及相应的置信区间）对两个输入参数中的震级阈值更为敏感;不同重现期的地震危险性估计结果对震级阈值的敏感程度不同;对不同的重现期而言,在影响地震危险性估计结果的不确定性上,两个输入参数之间存在非线性效应,且非线性效应程度不同。本文提出的不确定性分析流程和方法,可以推广应用于基于其它类型地震活动性模型的地震危险性估计不确定性分析。     

Influence of ground-motion correlation on probabilistic assessments of seismic hazard and loss: sensitivity analysis

Recent studies have shown that the proper treatment of ground-motion variability and, particularly, the correlation of ground motion are essential for the estimation of the seismic hazard, damage and loss for distributed portfolios. In this work we compared the effects of variations in the between-earthquake correlation and in the site-to-site correlation on probabilistic estimations of seismic damage and loss for the extended objects (hypothetical portfolio) and critical elements (e.g. bridges) of a network. Taiwan Island has been chosen as a test case for this study because of relatively high seismicity and previous experience in earthquake hazard modelling. The hazard and loss estimations were performed using Monte Carlo approach on the basis of stochastic catalogues and random ground-motion fields. We showed that the influence of correlation on parameters of seismic hazard, characteristics of loss distribution and the probability of damage depend, on one hand, on level of hazard and probability level of interest (return period) and, on the other hand, the relative influence of each type of correlation is not equal.     

Inferring seismic hazard in Sichuan-Yunnan region of China based on the modern earthquake catalogue (1980-2019)*

Based on the modern earthquake catalogue, the incomplete centroidal voronoi tessellation (ICVT) method was used in this study to estimate the seismic hazard in Sichuan-Yunnan region of China. We calculated spatial distributions of the total seismic hazard and background seismic hazard in this area. The Bayesian delaunay tessellation smoothing method put forward by Ogata was used to calculate the spatial distributions of b-value. The results show that seismic hazards in Sichuan-Yunnan region are high, and areas with relatively high hazard values are distributed along the main faults, while seismic hazards in Sichuan basin are relatively low.     

Fully probabilistic seismic displacement analysis of spatially distributed slopes using spatially correlated vector intensity measures

Earthquake‐induced slope displacement is an important parameter for safety evaluation and earthquake design of slope systems. Traditional probabilistic seismic hazard analysis usually focuses on evaluating slope displacement at a particular location, and it is not suitable for spatially distributed slopes over a large region. This study proposes a computationally efficient framework for fully probabilistic seismic displacement analysis of spatially distributed slope systems using spatially correlated vector intensity measures (IMs). First, a spatial cross‐correlation model for three key ground motion IMs, that is, peak ground acceleration (PGA), Arias intensity, and peak ground velocity, is developed using 2686 ground motion recordings from 11 recent earthquakes. To reduce the computational cost, Monte Carlo simulation and data reduction techniques are utilized to generate spatially correlated random fields for the vector IMs. The slope displacement hazards over the region are further quantified using empirical predictive equations. Finally, an illustrative example is presented to highlight the importance of the spatial correlation and the advantage of using spatially correlated vector IMs in seismic hazard analysis of spatially distributed slopes. Copyright © 2013 John Wiley & Sons, Ltd.     

基于特大地震发生率的川滇地区地震危险性预测新模型

川滇地区是我国地震危险性较高的地区之一.本文基于对特大强震的风险性考虑,使用全球地震模型OpenQuake软件,建立了川滇地区地震危险性预测新模型.首先根据构造特征划分多个震源分区,并整理出这些震源分区内断层活动特征与滑动速率;基于震源分区和断层模型,使用GPS应变率转换成的锥形古登堡-里克特关系作为整个区域的地震积累率,并允许超过历史最大震级的特大地震的出现,结合活动断层滑动速率所积累的地震发生率,给出震源分区内断层地震源和背景地震源的地震发生率的比率分配关系;在活动断层分段上,保留了大型断裂或其主要部分,没有根据小的阶区来对断层进行详细分段,以便分配特大地震发生率;并使用地震率平滑方法分配背景地震发生率.最后在OpenQuake中加入地震动预测方程,计算出了川滇地区的PGA分布图,为区域地震危险性提供科学依据.

     

Non-parametric Seismic Hazard in Mines

— Seismic hazard analysis methods in mines are reviewed for the purpose of selecting the best technique. To achieve this goal, the most often-used hazard analysis procedure, which is based on the classical frequency-magnitude Gutenberg-Richter relation, as well as alternative procedures are investigated.¶Since the maximum regional seismic event magnitude m _max is of paramount importance in seismic hazard analysis, this work provides a generic formula for the evaluation of this important parameter. The formula is capable of generating solutions in different forms, depending on the assumptions of the model of the magnitude distribution and/or the available information regarding past seismicity. It includes the cases (i) in which seismic event magnitudes are distributed according to the truncated frequency-magnitude Gutenberg-Richter relation, and (ii) in which no specific model of the magnitude distribution is assumed.¶Both synthetic, Monte-Carlo simulated seismic event catalogues, and actual data from the copper mine in Poland and gold mine in South Africa, are used to demonstrate the discussed hazard analysis techniques.¶Our studies show that the non-parametric technique, which is independent of the assumed model of the distribution of magnitude, provides an appropriate tool for seismic hazard assessment in mines where the magnitude distribution can be very complex.     

A probabilistic seismic hazard assessment for the Turkish territory: part II—fault source and background seismicity model

Over the years, several local and regional seismic hazard studies have been conducted for the estimation of the seismic hazard in Turkey using different statistical processing tools for instrumental and historical earthquake data and modeling the geologic and tectonic characteristics of the region. Recently developed techniques, increased knowledge and improved databases brought the necessity to review the national active fault database and the compiled earthquake catalogue for the development of a national earthquake hazard map. A national earthquake strategy and action plan were conceived and accordingly with the collaboration of the several institutions and expert researchers, the Revision of Turkish Seismic Hazard Map Project (UDAP-Ç-13-06) was initiated, and finalized at the end of 2014. The scope of the project was confined to the revision of current national seismic hazard map, using the state of the art technologies and knowledge of the active fault, earthquake database, and ground motion prediction equations. The following two seismic source zonation models are developed for the probabilistic earthquake hazard analysis: (1) Area source model, (2) Fault and spatial smoothing seismic source model (FSBCK). In this study, we focus on the development and the characterization of the Fault Source model, the background spatially smoothed seismicity model and intrinsic uncertainty on the earthquake occurrence-rates-estimation. Finally, PSHA results obtained from the fault and spatial smoothed seismic source model are presented for 43, 72, 475 and 2475 years return periods (corresponding to 69, 50, 10, and 2% probability of exceedance in 50 years) for PGA and 5% damped spectral accelerations at 0.2 and 1.0 s.     

A unified framework for earthquake risk assessment of transportation networks and gross regional product

Natural threats like earthquakes, hurricanes or tsunamis have had serious impacts on communities. In the past, major earthquakes in the United States like Loma Prieta 1989, Northridge 1994, or recent events in Italy like L’Aquila 2009 or Emilia 2012 emphasized the importance of preparedness and awareness to reduce social impacts. In addition to that, earthquake damaged businesses dramatically reduced the gross regional product. Generating scenario earthquakes in a proper way is important to suitably assess the risk in bridge networks and social losses in terms of gross regional product reduction. Seismic hazard is traditionally assessed by means of probabilistic seismic hazard analysis (PSHA). Although PSHA well represents the hazard at a specific location it is not suitable for spatially distributed systems. Scenario earthquakes can overcome this problem; they represent the actual distribution of ground shaking for a spatially distributed system while being hazard consistent. In this work a methodology to generate scenario earthquakes has been proposed using a novel approach with the aim of being the basic step for investigating possible earthquake consequences in seismic areas and contributing to reduce losses.     

尼泊尔8.1级地震后青藏高原NE向地震活动条带的形成及其意义

针对2015年4月25日发生于印度板块北边界中段的尼泊尔8.1级地震后,青藏高原中强以上地震活动呈现NE向条带分布的现象,本文将区域地质构造动力环境和以GPS水平位移为约束的数值模拟相结合,初步分析研究了这一地震活动条带的基本特征和形成机理;进而将其与1996年前后出现在青藏高原及东北部邻区的"西藏榭通门-内蒙古包头"NE向地震活动条带、以及该条带形成后强震活动由东向西的迁移状况进行比较,探讨了目前的NE向地震活动条带对未来强震活动趋势的预示意义。结果认为:尼泊尔8.1级地震后青藏高原NE向中强以上地震活动条带,是在印度板块北推挤压动力持续作用下,因青藏高原NE向构造应力加强引起的构造活动响应,并与尼泊尔大地震低角度逆冲错动和地壳介质能量传递影响有关;而未来地震趋势可能使该条带附近强震活动"填空",进而使该条带东、西两侧较大范围强震活动性增强。     

基于特征地震模型含时间的概率地震危险性分析方法及其应用研究

本文介绍了特征地震的对数正态分布模型、 正态分布模型和布朗过程时间模型, 提出了使用地震破裂面源模型的特征地震含时间的概率地震危险性分析理论和方法. 通过具体算例对不同的特征地震模型进行了比较, 并对特征地震危险性分析方法进行了系统探索. 研究结果表明, 特征地震含时间模型在复发周期早期的地震危险性低于不含时间模型, 而在后期其地震危险性则高于不含时间模型. 特征地震复发周期的对数正态分布模型与布朗过程时间模型计算得出的地震危险性差别不大. 在未到期望复发时间时, 正态分布模型与前两种模型计算的地震危险性差别不大; 而接近期望复发时间及之后时段, 正态分布模型计算的地震危险性则迅速增大.      

Convex set theory-based seismic hazard analysis of low seismicity area

Historical seismic data and seismogenic information are quite scarce for the low seismicity region, and modeling the parameters uncertainties based on probabilistic model is suspicious. The convex set theory-based seismic hazard analysis approach is proposed. The uncertainties of b value, the annual occurrence rate v and the upper bound magnitude M_u are described by the envelop bound convex model and the ellipsoidal bound convex model. Convex analysis method and China probabilistic seismic hazard analysis methodology are combined to perform a bound seismic hazard analysis for Ningbo city, China. The seismic intensity interval obtained using the bound seismic hazard analysis is compared with that calculated using China probabilistic seismic hazard analysis methodology. The sensitivity analysis indicates that the interval of seismic intensity is most sensitive to the annual occurrence rate v. Furthermore, the different convex models have little effect on the interval of seismic intensity.     

Probabilistic seismic hazard assessment of Eastern Marmara Region

The objective of this study is to evaluate the seismic hazard in Eastern Marmara Region using an improved probabilistic seismic hazard assessment methodology. Two significant improvements over the previous seismic hazard assessment practices are accomplished in this study: advanced seismic source characterization models in terms of source geometry and recurrence relationships are developed, and improved global ground motion models (NGA-W1 models) are employed to represent the ground motion variability. Planar fault segments are defined and a composite magnitude distribution model is used for all seismic sources in the region to properly represent the characteristic behavior of the North Anatolian Fault without the need for an additional background zone. Multi-segment ruptures are considered using the rupture model proposed by the Working Group on California Earthquake Probabilities (2003). Events in the earthquake catalogue are attributed to the fault zones and scenario weights are determined by releasing the accumulated seismic energy. The uniform hazard spectra at 10 % probability of exceedance in 50 years hazard level for different soil conditions (soil and rock) are revealed for specific locations in the region (Adapazar?, Düzce, Gemlik, Izmit, Iznik and Sapanca). Hazard maps of the region for rock site conditions at the selected hazard levels are provided to allow the readers perform site-specific hazard assessment and develop site-specific design spectrum for local site conditions.