Oxygen isotope mapping of the Archean Sturgeon Lake caldera complex and VMS-related hydrothermal system, Northwestern Ontario, Canada

The hydrothermal and magmatic evolution of the Sturgeon Lake caldera complex is graphically documented by a regional-scale (525 km²) analysis of oxygen isotopes. Spatial variations in whole-rock oxygen isotope compositions provide a thermal map of the cumulative effects of multiple stages of hydrothermal metasomatism before, during, and after volcanogenic massive sulfide (VMS) mineralization. There is a progressive, upward increase in δ¹⁸O from less than 2‰ to greater than 15‰ through a 5-km-thick section above the Biedelman Bay subvolcanic intrusive complex. This isotopic trend makes it clear that at least the earlier phases of this intrusive complex were coeval with the overlying VMS-hosting cauldron succession and provided thermal energy to drive a convective hydrothermal circulation system. The sharp contrast in δ¹⁸O values between late stage phases of the Biedelman Bay intrusion and immediate hanging wall strata indicates that the main phase of VMS-related hydrothermal activity took place before late-stage resurgence in the cauldron-related magmatic activity. Mineralogical and isotopic evidence indicates the presence of both syn- and postmineralization hydrothermal activity defined by the presence of widespread semiconformable and more restricted discordant alteration zones that affect the pre- and syncauldron strata. The semiconformable alteration zones formed during early stages of hydrothermal circulation and are defined by widespread silicification and carbonatization in association with relatively high δ¹⁸O values. The discordant alteration assemblages, containing Al-silicate minerals with chloritoid and/or Fe-rich carbonate or chlorite, centered on synvolcanic faults represent restricted zones of both seawater inflow and hydrothermal fluid upflow. A rapid increase in δ¹⁸O values (∼7–9‰) over a short distance (<200 m) suggests marked cooling of hydrothermal fluid from ∼350°C to less than 130°C either just before or during discharge onto the seafloor. Late emplacement of diorite sills and a dacite dome disrupted the isotopic imprint of cauldron-stage hydrothermal activity. The abrupt lowering of δ¹⁸O values at the transition from explosive to passive volcanism (andesite flows and dacite domes) indicates postcauldron emergence. Subsequently, thrust faulting disrupted the older synvolcanic hydrothermal isotopic patterns.     

Isotopic constraints on fluid evolution and precipitation mechanisms for the Boléo Cu–Co–Zn district, Mexico

Stable and radiogenic isotope composition of stratiform Cu–Co–Zn mineralization and associated sedimentary rocks within the Boléo district of the Miocene Santa Rosalía basin, Baja California Sur, constrains the evolution of seawater and hydrothermal fluids and the mechanisms responsible for sulfide and oxide deposition. Stable isotope geochemistry of limestone and evaporite units indicates a strong paleogeographic influence on the chemistry of the water column. Near-shore limestone at the base of the Boléo Formation is characterized by modified marine carbon (δ ¹³C_PDB=−6.0 to +4.4‰) and oxygen (δ ¹⁸O_SMOW=+19.5 to +26.2‰) isotope composition due to the influx of ¹³C- and ¹⁸O-depleted fluvial water. Sulfate sulfur isotope composition (δ ³⁴S_CDT=+17.21 to +22.3‰ and δ ¹⁸O_SMOW=+10.7 to +13.1‰) for basal evaporite and claystone facies are similar to Miocene seawater. Strontium isotopes are less radiogenic than expected for Miocene seawater due to interaction with volcanic rocks. Low S/C ratios, high Mn contents and sedimentological evidence indicate the basin water column was oxidizing. The oxygenated basin restricted sulfide precipitation to within the sedimentary pile by replacement of early diagenetic framboidal pyrite and pore-space filling by Cu–Co–Zn sulfides to produce disseminated sulfides. Quartz–Mn oxide oxygen isotope geothermometry constrains mineralization temperature between 18 and 118°C. Sulfur isotopes indicate the following sources of sulfide: (1) bacterial sulfate reduction within the sedimentary pile produced negative δ ³⁴S values (<−20‰) in framboidal pyrite; and (2) bacterial sulfate reduction at high temperature (80–118°C) within the sedimentary pile during the infiltration of the metal-bearing brines produced Cu–Co–Zn sulfides with negative, but close to 0‰, δ ³⁴S values. Isotope modeling of fluid-rock reaction and fluid mixing indicates: (1) sedimentary and marine carbonates (δ ¹³C=−11.6 to −3.2‰ and δ ¹⁸O=+19.0 to +21.8‰) precipitated from basin seawater/pore water that variably mixed with isotopically depleted meteoric waters; and (2) hydrothermal calcite (δ ¹³C=−7.9 to +4.3‰ and δ ¹⁸O=+22.1 to +25.8‰) formed by dissolution and replacement of authigenic marine calcite by downward-infiltrating metalliferous brine and brine-sediment exchange, that prior to reaction with calcite, had mixed with isotopically depleted pore water. The downward infiltration of metalliferous brine is inferred from lateral and stratigraphic metal distributions and from the concentration of Cu sulfides along the upper contact of pyrite-bearing laminae. The co-existence and textural relationships among framboidal pyrite, base metal sulfides, carbonate and Mn–Fe oxides (including magnetite) within mineralized units are consistent with carbonate replacement and high-temperature bacterial reduction within the sedimentary pile occurring simultaneously below a seawater column under predominantly oxygenated conditions.     

Imprint of meteoric water on the stable isotope compositions of igneous and secondary minerals,Kap Edvard Holm Complex,East Greenland

 Hydrogen and oxygen isotope analyses have been made of hydrous minerals in gabbros and basaltic xenoliths from the Eocene Kap Edvard Holm intrusive complex of East Greenland. The analyzed samples are of three types: (1) primary igneous hornblendes and phlogopites that crystallized from partial melts of hydrothermally altered basaltic xenoliths, (2) primary igneous hornblendes that formed during late–magmatic recrystallization of layered gabbroic cumulates, and (3) secondary actinolite, epidote and chlorite that formed during subsolidus alteration of both xenoliths and gabbros. Secondary actinolite has a δ¹⁸O value of −5.8‰ and a δD value of −158‰. These low values reflect subsolidus alteration by low–δ¹⁸O, low–δD hydrothermal fluids of meteoric origin. The δD value is lower than the −146 to −112‰ values previously reported for amphiboles from other early Tertiary meteoric–hydrothermal systems in East Greenland and Scotland, indicating that the meteoric waters at Kap Edvard Holm were isotopically lighter than typical early Tertiary meteoric waters in the North Atlantic region. This probably reflects local climatic variations caused by formation of a major topographic dome at about the time of plutonism and hydrothermal activity. The calculated isotopic composition of the meteoric water is δD=−110 ± 10‰, δ¹⁸O ≈−15‰. Igneous hornblendes and phlogopites from pegmatitic pods in hornfelsed basaltic xenoliths have δ¹⁸O values between −6.0 and −3.8‰ and δD values between −155 and −140‰. These are both much lower than typical values of fresh basalts. The oxygen isotope fractionations between pegmatitic hornblendes and surrounding hornfelsic minerals are close to equilibrium fractionations for magmatic temperatures, indicating that the pegmatites crystallized from low–δ¹⁸O partial melts of xenoliths that had been hydrothermally altered and depleted in ¹⁸O prior to stoping. The pegmatitic minerals may have crystallized with low primary δD values inherited from the altered country rocks, but these values were probably overprinted extensively by subsolidus isotopic exchange with low–δD meteoric–hydrothermal fluids. This exchange was facilitated by rapid self–diffusion of hydrogen through the crystal structures. Primary igneous hornblendes from the plutonic rocks have δ¹⁸O values between +2.0 and +3.2‰ and δD values between −166 and −146‰. The ¹⁸O fractionations between hornblendes and coexisting augites are close to equilibrium fractionations for magmatic temperatures, indicating that the hornblendes crystallized directly from the magma and subsequently underwent little or no oxygen exchange. The hornblendes may have crystallized with low primary δD values, due to contamination of the magma with altered xenolithic material, but the final δD values were probably controlled largely by subsolidus isotopic exchange. This inference is based partly on the observation that coexisting plagioclase has been extensively depleted in ¹⁸O via a mineral–fluid exchange reaction that is much slower than the hydrogen exchange reaction in hornblende. It is concluded that all hydrous minerals in the study area, whether igneous or secondary, have δD values that reflect extensive subsolidus isotopic equilibration with meteoric–hydrothermal fluids. Received: 22 March 1994 / Accepted: 26 January 1995     

Low-pressure,water-assisted anatexis of basic dykes in a contact metamorphic aureole,Fuerteventura (Canary Islands): oxygen isotope evidence for a meteoric fluid origin

Migmatites produced by low-pressure anatexis of basic dykes are found in a contact metamorphic aureole around a pyroxenite–gabbro intrusion (PX2), on Fuerteventura. Dykes outside and inside the aureole record interaction with meteoric water, with low or negative δ¹⁸O whole-rock values (+0.2 to −3.4‰), decreasing towards the contact. Recrystallised plagioclase, diopside, biotite and oxides, from within the aureole, show a similar evolution with lowest δ¹⁸O values (−2.8, −4.2, −4.4 and −7.6‰, respectively) in the migmatite zone, close to the intrusion. Relict clinopyroxene phenocrysts preserved in all dykes, retain typically magmatic δ¹⁸O values up to the anatectic zone, where the values are lower and more heterogeneous. Low δ¹⁸O values, decreasing towards the intrusion, can be ascribed to the advection of meteoric water during magma emplacement, with increasing fluid/rock ratios (higher dyke intensities towards the intrusion acting as fluid-pathways) and higher temperatures promoting increasing exchange during recrystallisation. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Contrasting stable isotope behavior between calcite and dolomite marbles,Lone Mountain,Nevada

 Late Proterozoic to Cambrian carbonate rocks from Lone Mountain, west central Nevada, record multiple post-depositional events including: (1) diagenesis, (2) Mesozoic regional metamorphism, (3) Late Cretaceous contact metamorphism, related to the emplacement of the Lone Mountain granitic pluton and (4) Tertiary hydrothermal alteration associated with extension, uplift and intrusion of silicic porphyry and lamprophyre dikes. Essentially pure calcite and dolomite marbles have stable isotopic compositions that can be divided into two groups, one with positive δ¹³C values from+3.1 to +1.4 ‰ (PDB) and high δ¹⁸O values from +21.5 to +15.8 ‰ (SMOW), and the other with negative δ¹³C values from –3.3 to –3.6‰ and low δ¹⁸O values from +16.9 to +11.1‰. Marbles also contain minor amounts of quartz, muscovite and phlogopite. Brown and blue luminescent, clear, smooth textured quartz grains from orange luminescent calcite marbles have high δ¹⁸O values from +23.9 to +18.1‰, while brown luminescent, opaque, rough textured quartz grains from red luminescent dolomite marbles typically have low δ¹⁸O values from +2.0 to +9.3‰. The δ¹⁸O values of muscovite and phlogopite from marbles are typical of micas in metamorphic rocks, with values between +10.4 and +14.4‰, whereas mica δD values are very depleted, varying from −102 to −156‰. No significant lowering of the δ¹⁸O values of Lone Mountain carbonates is inferred to have occurred during metamorphism as a result of devolatilization reactions because of the essentially pure nature of the marbles. Bright luminescence along the edges of fractures, quartz cements and quartz overgrowths in dolomite marbles, low δD values of micas, negative δ¹³C values and low δ¹⁸O values of calcite and dolomite, and depleted δ¹⁸O values of quartz from dolomite marbles all indicate that meteoric fluids interacted with Lone Mountain marbles during the Tertiary. Partial oxygen isotopic exchange between calcite and low ¹⁸O meteoric fluids lowered the δ¹⁸O values of calcite, resulting in uniform quartz-calcite fractionations that define an apparent pseudoisotherm. These quartz-calcite fractionations significantly underestimate both the temperature of metamorphism and the temperature of post-metamorphic alteration. Partial oxygen isotopic exchange between quartz and meteoric fluids also resulted in ¹⁸O depletion of quartz from dolomite marbles. This partial exchange was facilitated by an increase in the surface area of the quartz as a result of its dissolution by meteoric fluids. The negative δ¹³C values in carbonates result from the oxidation of organic material by meteoric fluids following metamorphism. Stable isotopic data from Lone Mountain marbles are consistent with the extensive circulation of meteoric hydrothermal fluids throughout western Nevada in Tertiary time. Received: 1 February 1994/Accepted: 12 September 1995     

Carbon and oxygen isotope constraints on fluid sources and fluid–wallrock interaction in regional alteration and iron-oxide–copper–gold mineralisation, eastern Mt Isa Block, Australia

The source of metasomatic fluids in iron-oxide–copper–gold districts is contentious with models for magmatic and other fluid sources having been proposed. For this study, δ ¹⁸O and δ ¹³C ratios were measured from carbonate mineral separates in the Proterozoic eastern Mt Isa Block of Northwest Queensland, Australia. Isotopic analyses are supported by petrography, mineral chemistry and cathodoluminescence imagery. Marine meta-carbonate rocks (ca. 20.5‰ δ ¹⁸O and 0.5‰ δ ¹³C calcite) and graphitic meta-sedimentary rocks (ca. 14‰ δ ¹⁸O and −18‰ δ ¹³C calcite) are the main supracrustal reservoirs of carbon and oxygen in the district. The isotopic ratios for calcite from the cores of Na–(Ca) alteration systems strongly cluster around 11‰ δ ¹⁸O and −7‰ δ ¹³C, with shifts towards higher δ ¹⁸O values and higher and lower δ ¹³C values, reflecting interaction with different hostrocks. Na–(Ca)-rich assemblages are out of isotopic equilibrium with their metamorphic hostrocks, and isotopic values are consistent with fluids derived from or equilibrated with igneous rocks. However, igneous rocks in the eastern Mt Isa Block contain negligible carbon and are incapable of buffering the δ ¹³C signatures of CO₂-rich metasomatic fluids associated with Na–(Ca) alteration. In contrast, plutons in the eastern Mt Isa Block have been documented as having exsolved saline CO₂-rich fluids and represent the most probable fluid source for Na–(Ca) alteration. Intrusion-proximal, skarn-like Cu–Au orebodies that lack significant K and Fe enrichment (e.g. Mt Elliott) display isotopic ratios that cluster around values of 11‰ δ ¹⁸O and −7‰ δ ¹³C (calcite), indicating an isotopically similar fluid source as for Na–(Ca) alteration and that significant fluid–wallrock interaction was not required in the genesis of these deposits. In contrast, K- and Fe-rich, intrusion-distal deposits (e.g. Ernest Henry) record significant shifts in δ ¹⁸O and δ ¹³C towards values characteristic of the broader hostrocks to the deposits, reflecting fluid–wallrock equilibration before mineralisation. Low temperature, low salinity, low δ ¹⁸O (<10‰ calcite) and CO₂-poor fluids are documented in retrograde metasomatic assemblages, but these fluids are paragenetically late and have not contributed significantly to the mass budgets of Cu–Au mineralisation.     

Carbonate alteration associated with talc-chlorite mineralization in the eastern Pyrenees, with emphasis on the St. Barthelemy Massif

Summary The eastern Pyrenees host a large number of talc-chlorite mineralizations of Albian age (112–97 Ma), the largest of which occur in the St. Barthelemy massif. There talc develops by hydrothermal replacement of dolostones, which were formed by alteration of calcite marbles. This alteration is progressive. Unaltered calcite marbles have oxygen isotope composition of about 25‰ (V-SMOW). The δ¹⁸O values decrease down to values of 12‰ towards the contact with dolostones. This ¹⁸O depletion is accompanied by Mg enrichment, LREE fractionation and systematic shifts in the Sr isotope compositions, which vary from ⁸⁷Sr/⁸⁶Sr = 0.7087–0.7092 in unaltered calcite marbles to slightly more radiogenic compositions with ⁸⁷Sr/⁸⁶Sr = 0.7094 near dolomitization fronts. Dolostones have δ¹⁸O values (about 9‰) lower than calcitic marbles, higher REE content and more radiogenic Sr isotope composition (⁸⁷Sr/⁸⁶Sr = 0.7109 to 0.7130). Hydrothermal calcites have δ¹⁸O values close to dolostones but substantially lower δ¹³C values, down to −6.5‰, which is indicative of the contribution of organic matter. The REE content of hydrothermal calcite is one order of magnitude higher than that of calcitic marbles. Its highly radiogenic Sr composition with ⁸⁷Sr/⁸⁶Sr = 0.7091 to 0.7132 suggests that these elements were derived from silicate rocks, which experienced intense chlorite alteration during mineralization. The chemical and isotopic compositions of the calcite marbles, the dolostones and the hydrothermal calcites are interpreted as products of successive stages of fluid-rock interaction with increasing fluid-rock ratios. The hydrothermal quartz, calcite, talc and chlorite are in global mutual isotopic equilibrium. This allows the calculation of the O isotope composition of the infiltrating water at 300 °C, which is in the δ¹⁸O = 2–4.5‰ range. Hydrogen isotope compositions of talc and chlorite indicate a δD = 0 to −20‰. This water probably derived from seawater, with minor contribution of evolved continental water.     

Stable isotopes and amphibole chemistry on hydrothermally altered granitoids in the North Chilean Precordillera: a limited role for meteoric water?

Whole rock and mineral stable isotope and microprobe analyses are presented from granitoids of the North Chilean Precordillera. The Cretaceous to Tertiary plutonic rocks contain important ore deposits and frequently display compositional and textural evidence of hydrothermal alteration even in barren rocks. Deuteric alteration includes replacement of biotite and amphibole by chlorite and epidote, sericitization and saussuritization of feldspars, and uralitization of clinopyroxene and/or amphibole. While whole rock compositions are not significantly affected, compositional variations in amphiboles suggest two types of hydrothermal alteration. Hornblende with actinolitic patches and rims and tight compositional trends from hornblende to Mg-rich actinolite indicate increasing oxygen fugacity from magmatic to hydrothermal conditions. Uralitic amphiboles exhibiting irregular Mg-Fe distribution and variable Al content are interpreted as reflecting subsolidus hydration reactions at low temperatures. The δD values of hydrous silicates vary from −63 to −105‰. Most δ¹⁸O values of whole rocks are in the range of 5.7 to 7.7‰ and are considered normal for igneous rocks in the Andes. These δ¹⁸O values also coincide well with the oxygen isotope composition of geochemically similar recent volcanics from the Central Andean Volcanic Zone (δ¹⁸O = 7.0–7.4‰). Only one sample in this study (δ¹⁸O = 3.0‰) appears to be depleted by isotope exchange with light meteoric water at high temperatures. The formation of secondary minerals in all other intrusions is mainly the product of deuteric alteration. This also holds true for the sample from El Abra, the only pluton associated with mineralization. This indicates the dominant role of a magmatic rather than a meteoric fluid in the alteration of the Cretaceous and Tertiary granitoids in northern Chile. Received: 8 July 1998 / Accepted: 15 April 1999     

A fluid inclusion and stable isotope study of 200 Ma of fluid evolution in the Galway Granite, Connemara, Ireland

Fluid inclusions in granite quartz and three generations of veins indicate that three fluids have affected the Caledonian Galway Granite. These fluids were examined by petrography, microthermometry, chlorite thermometry, fluid chemistry and stable isotope studies. The earliest fluid was a H₂O-CO₂-NaCl fluid of moderate salinity (4–10 wt% NaCl eq.) that deposited late-magmatic molybdenite mineralised quartz veins (V₁) and formed the earliest secondary inclusions in granite quartz. This fluid is more abundant in the west of the batholith, corresponding to a decrease in emplacement depth. Within veins, and to the east, this fluid was trapped homogeneously, but in granite quartz in the west it unmixed at 305–390 °C and 0.7–1.8 kbar. Homogeneous quartz δ¹⁸O across the batholith (9.5 ± 0.4‰n = 12) suggests V₁ precipitation at high temperatures (perhaps 600 °C) and pressures (1–3 kbar) from magmatic fluids. Microthermometric data for V₁ indicate lower temperatures, suggesting inclusion volumes re-equilibrated during cooling. The second fluid was a H₂O-NaCl-KCl, low-moderate salinity (0–10 wt% NaCl eq.), moderate temperature (270–340 °C), high δD (−18 ± 2‰), low δ¹⁸O (0.5–2.0‰) fluid of meteoric origin. This fluid penetrated the batholith via quartz veins (V₂) which infill faults active during post-consolidation uplift of the batholith. It forms the most common inclusion type in granite quartz throughout the batholith and is responsible for widespread retrograde alteration involving chloritization of biotite and hornblende, sericitization and saussuritization of plagioclase, and reddening of K-feldspar. The salinity was generated by fluid-rock interactions within the granite. Within granite quartz this fluid was trapped at 0.5–2.3 kbar, having become overpressured. This fluid probably infiltrated the Granite in a meteoric-convection system during cooling after intrusion, but a later age cannot be ruled out. The final fluid to enter the Granite and its host rocks was a H₂O-NaCl-CaCl₂-KCl fluid with variable salinity (8–28 wt% NaCl eq.), temperature (125–205 °C), δD (−17 to −45‰), δ¹⁸O (−3 to + 1.2‰), δ¹³C_CO2 (−19 to 0‰) and δ³⁴S_sulphate (13–23‰) that deposited veins containing quartz, fluorite, calcite, barite, galena, chalcopyrite sphalerite and pyrite (V₃). Correlations of salinity, temperature, δD and δ¹⁸O are interpreted as the result of mixing of two fluid end-members, one a high-δD (−17 to −8‰), moderate-δ¹⁸O (1.2–2.5‰), high-δ¹³C_CO2 (> −4‰), low-δ³⁴S_sulphate (13‰), high-temperature (205–230 °C), moderate-salinity (8–12 wt% NaCl eq.) fluid, the other a low-δD (−61 to −45‰), low-δ¹⁸O (−5.4 to −3‰), low-δ¹³C (<−10‰), high-δ³⁴S_sulphate (20–23‰) low-temperature (80–125 °C), high-salinity (21–28 wt% NaCl eq.) fluid. Geochronological evidence suggests V₃ veins are late Triassic; the high-δD end-member is interpreted as a contemporaneous surface fluid, probably mixed meteoric water and evaporated seawater and/or dissolved evaporites, whereas the low-δD end-member is interpreted as a basinal brine derived from the adjacent Carboniferous sequence. This study demonstrates that the Galway Granite was a locus for repeated fluid events for a variety of reasons; from expulsion of magmatic fluids during the final stages of crystallisation, through a meteoric convection system, probably driven by waning magmatic heat, to much later mineralisation, concentrated in its vicinity due to thermal, tectonic and compositional properties of granite batholiths which encourage mineralisation long after magmatic heat has abated. Received: 3 April 1996 / Accepted: 5 May 1997     

Oxygen isotope constraints on the petrogenesis of the Sybille intrusion of the Proterozoic Laramie Anorthosite Complex

The origin of monzonitic intrusions that are associated with Proterozoic massif-type anorthosite complexes is controversial. A detailed oxygen isotope study of the Sybille intrusion, a monzonitic intrusion of the Laramie Anorthosite Complex (Wyoming), indicates that either derivation from a basaltic magma of mantle origin with a metasedimentary component (∼20%) incorporated early in its magmatic history, or a partial melt of lower crustal rocks is consistent with the data. The oxygen isotope compositions of plagioclase, pyroxene and zircon from the Sybille monzosyenite, the dominant rock type in the Sybille intrusion, were analyzed in order to establish the isotopic composition of the source of the magma. Plagioclase δ¹⁸O values range from 6.77 to 9.17‰. We interpret the higher plagioclase δ¹⁸O values (average 8.69 ± 0.30‰, n = 19) to be magmatic in origin, lower plagioclase δ¹⁸O values (average 7.51 ± 0.44‰, n = 22) to be the result of variable subsolidus alteration, and pyroxene δ¹⁸O values (average 6.34 ± 0.38‰, n = 19) to be the result of closed-system diffusional exchange during cooling. Low magnetic zircons, which have been shown to retain magmatic oxygen isotope values despite high grade metamorphism and extensive subsolidus hydrothermal alteration, have δ¹⁸O values (7.40 ± 0.24‰, n = 11) which are consistent with our interpretation of the plagioclase and pyroxene results. Oxygen isotope data from all three minerals indicate that the magmatic oxygen isotope composition of the Sybille intrusion is enriched in ¹⁸O relative to the composition of average or “normal” mantle-derived magmas. This enrichment is approximately twice the oxygen isotope enrichment that could result from closed-system fractionation, rendering a closed-system, comag- matic petrogenetic model between the Sybille intrusion and the mantle-derived anorthositic lithologies of the Laramie Anorthosite Complex improbable. Received: 7 April 1998 / Accepted: 19 January 1999     

Sulfur isotope characteristics of metamorphosed Zn–Cu volcanogenic massive sulfides in the Areachap Group, Northern Cape Province, South Africa

Zn- and Cu-rich massive sulfide ores of volcanogenic origin [volcanogenic massive sulfide (VMS) deposits] occur as stratiform/stratabound lenses of variable size hosted by gneisses, amphibolites, and schists of the Areachap Group, in the Northern Cape Province of South Africa. The Areachap Group represents the highly deformed and metamorphosed remnants of a Mesoproterozoic volcanic arc that was accreted onto the western margin of the Kaapvaal Craton during the ∼1.0–1.2 Ga Namaquan Orogeny. Sulfur isotope data (δ³⁴S) are presented for 57 sulfide separates and one barite sample from five massive sulfide occurrences in the Areachap Group. Although sulfides from each site have distinct sulfur isotope values, all δ³⁴S values fall within a very limited range (3.0‰ to 8.5‰). Barite has a δ³⁴S value of 18.5‰, very different from that of associated sulfides. At one of the studied sites (Kantienpan), a distinct increase in δ³⁴S of sulfides is observed from the massive sulfide lens into the disseminated sulfides associated with a distinct footwall alteration zone. Sulfide–sulfide and sulfide–barite mineral pairs which recrystallized together during amphibolite- and lower granulite facies metamorphism are not in isotopic equilibrium. Sulfur isotope characteristics of sulfides and sulfates of the Zn–Cu ores in the Areachap Group are, however, very similar to base metal sulfide accumulations associated with modern volcanic arcs and unsedimented mid-ocean ridges. It is thus concluded that profound recrystallization and textural reconstitution associated with high-grade regional metamorphism of the massive sulfide ores of the Areachap Group did not result in extensive sulfur isotopic homogenization. This is similar to observations in other metamorphosed VMS deposit districts and confirms that massive sulfide ores remain effectively a closed system for sulfur isotopes for both sulfides and sulfates during metamorphism.     

H and O isotopic compositions of layered silicates in metasomatites from the Gai Zn-Cu massive sulfide deposit, southern urals

Substantial differences in isotopic compositions of micas and pyrophyllites from metasomatites related to various stages of the process that formed the giant Gai massive sulfide deposit have been established. The illite from the earliest and predominant chlorite-illite-quartz metasomatite is characterized by the least δD values of −(50–85)‰ and δ¹⁸O=7–11‰. The pyrophyllite-quartz metasomatite as well as illite and pyrophyllite schists developed locally in the southern part of the deposit that likely correspond to the site of discharge of late geothermal paleosystem, contain pyrophyllite and illite with much higher values of δD=−(25–45)‰ and δ¹⁸O=4–9‰. Local zones of illite-paragonite schist complete the mineral formation and are characterized by the transitional δD values of −(30–55)‰ and elevated δ¹⁸O of 10–11‰. The most plausible model of isotopic evolution in the hydrothermal system, with an initial temperature of mica formation at 250°C, assumes the mixing of transformed sea water with a magmatic (metamorphic) water at the initial stage when the background metasomatites and massive sulfide orebodies of the northern lode have been formed. Subsequently, after the burial of the northern lode beneath basaltic andesite flows, the repeated sea water invasions took place in the southern discharge site of the system. As a result, the pyrophyllite-quartz metasomatite was formed; the pyrophyllite and illite schists originated in tectonic compression zones. The interaction of this water with silicate rocks was completed by a formation of illite-paragonite schist. In general, the substantial contribution of sea water to the formation of metasomatic halo of the deposit casts no doubt.     

Mineralogical and stable isotope studies of gold–arsenic mineralisation in the Sams Creek peralkaline porphyritic granite, South Island, New Zealand

At Sams Creek, a gold-bearing, peralkaline granite porphyry dyke, which has a 7 km strike length and is up to 60 m in thickness, intrudes camptonite lamprophyre dykes and lower greenschist facies metapelites and quartzites of the Late Ordovician Wangapeka formation. The lamprophyre dykes occur as thin (< 3 m) slivers along the contacts of the granite dyke. δ¹⁸O_magma values (+5 to +8‰, VSMOW) of the A-type granite suggest derivation from a primitive source, with an insignificant mature crustal contribution. Hydrothermal gold–sulphide mineralisation is confined to the granite and adjacent lamprophyre; metapelite country rocks have only weak hydrothermal alteration. Three stages of hydrothermal alteration have been identified in the granite: Stage I alteration (high fO₂) consisting of magnetite–siderite±biotite; Stage II consisting of thin quartz–pyrite veinlets; and Stage III (low fO₂) consisting of sulphides, quartz and siderite veins, and pervasive silicification. The lamprophyre is altered to an ankerite–chlorite–sericite assemblage. Stage III sulphide veins are composed of arsenopyrite + pyrite ± galena ± sphalerite ± gold ± chalcopyrite ± pyrrhotite ± rutile ± graphite. Three phases of deformation have affected the area, and the mineralised veins and the granite and lamprophyre dykes have been deformed by two phases of folding, the youngest of which is Early Cretaceous. Locally preserved early-formed fluid inclusions are either carbonic, showing two- or three-phases at room temperature (liquid CO₂-CH₄ + liquid H₂O ± CO₂ vapour) or two-phase liquid-rich aqueous inclusions, some of which contain clathrates. Salinities of the aqueous inclusions are in the range of 1.4 to 7.6 wt% NaCl equiv. Final homogenisation temperatures (Th) of the carbonic inclusions indicate minimum trapping temperatures of 320 to 355°C, which are not too different from vein formation temperatures of 340–380°C estimated from quartz–albite stable isotope thermometry. δ¹⁸O values of Stage II and III vein quartz range from +12 and +17‰ and have a bimodal distribution (+14.5 and +16‰) with Stage II vein quartz accounting for the lower values. Siderite in Stage III veins have δ¹⁸O (+12 to +16‰) and δ¹³C values (−5‰, relative to VPDB), unlike those from Wangapeka Formation metasediments (δ¹³C_{bulk carbon} values of −24 to −19‰) and underlying Arthur Marble marine carbonates (δ¹⁸O = +25‰ and δ¹³C = 0‰). Calculated δ¹⁸O_water (+8 to +11‰, at 340°C) and (−5‰) values from vein quartz and siderite are consistent with a magmatic hydrothermal source, but a metamorphic hydrothermal origin cannot be excluded. δ³⁴S values of sulphides range from +5 to +10‰ (relative to CDT) and also have a bimodal distribution (modes at +6 and +9‰, correlated with Stage II and Stage III mineralisation, respectively). The δ³⁴S values of pyrite from the Arthur Marble marine carbonates (range from +3 to +13‰) and Wangapeka Formation (range from −4 to +9.5‰) indicate that they are potential sources of sulphur for sulphides in the Sams Creek veins. Another possible source of the sulphur is the lithospheric mantle which has positive values up to +14‰. Ages of the granite, lamprophyre, alteration/mineralisation, and deformation in the region are not well constrained, which makes it difficult to identify sources of mineralisation with respect to timing. Our mineralogical and stable isotope data does not exclude a metamorphic source, but we consider that the source of the mineralisation can best be explained by a magmatic hydrothermal source. Assuming that the hydrothermal fluids were sourced from crystallisation of the Sams Creek granite or an underlying magma chamber, then the Sams Creek gold deposit appears to be a hybrid between those described as reduced granite Au–Bi deposits and alkaline intrusive-hosted Au–Mo–Cu deposits.     

S,Pb, C and O isotopic compositions and ore genesis of the strata-bound polymetallic sulfide deposits in central Inner Mongolia,China

The strata-bound Cu−Pb−Zn polymetallic sulfide deposits occur in metamorphic rocks of greenschist phase of the middle-upper Proterozoic Langshan Group in central Inner Mongolia. δ³⁴S values for sulfides range from −3.1‰ to +37.3‰, and an apparent difference is noticed between vein sulfides and those in bedded rocks. For example, δ³⁴S values for bedded pyrite range from +10.6‰ to +20.0‰, while those for vein pyrite vary from −3.1‰ to +14.1‰. δ³⁴S of bedded pyrrhotite is in the range +7.9‰–+23.5‰ in comparison with +6.5‰–+17.1‰ for vein pyrrhotite. The wide scatter of δ³⁴S and the enrichment of heavier sulfur indicate that sulfur may have been derived from H₂S as a result of bacterial reduction of sulfates in the sea water. Sulfur isotopic composition also differs from deposit to deposit in this area because of the difference in environment in which they were formed. The mobilization of bedded sulfides in response to regional metamorphism and magmatic intrusion led to the formation of vein sulfides. δ¹⁸O and δ¹³C of ore-bearing rocks and wall rocks are within the range typical of ordinary marine facies, with the exception of lower values for ore-bearing marble at Huogeqi probably due to diopsidization and tremalitization of carbonate rocks. Pb isotopic composition is relatively stable and characterized by lower radio-genetic lead. The age of basement rocks was calculated to be about 23.9 Ma and ore-forming age 7.8 Ma.²⁰⁷Pb/²⁰⁴Pb−²⁰⁶Pb/²⁰⁴Pb and²⁰⁸Pb/²⁰⁴Pb−²⁰⁶Pb/²⁰⁴Pb plots indicate that Pb may probably be derived from the lower crust or upper mantle. It is believed that the deposits in this region are related to submarine volcanic exhalation superimposed by later regional metamorphism and magmatic intrusion.     

4.4 billion years of crustal maturation: oxygen isotope ratios of magmatic zircon

Analysis of δ¹⁸O in igneous zircons of known age traces the evolution of intracrustal recycling and crust-mantle interaction through time. This record is especially sensitive because oxygen isotope ratios of igneous rocks are strongly affected by incorporation of supracrustal materials into melts, which commonly have δ¹⁸O values higher than in primitive mantle magmas. This study summarizes data for δ¹⁸O in zircons that have been analyzed from 1,200 dated rocks ranging over 96% of the age of Earth. Uniformly primitive to mildly evolved magmatic δ¹⁸O values are found from the first half of Earth history, but much more varied values are seen for younger magmas. The similarity of values throughout the Archean, and comparison to the composition of the “modern” mantle indicate that δ¹⁸O of primitive mantle melts have remained constant (±0.2‰) for the past 4.4 billion years. The range and variability of δ¹⁸O in all Archean zircon samples is subdued (δ¹⁸O(Zrc)=5–7.5‰) ranging from values in high temperature equilibrium with the mantle (5.3± 0.3‰) to slightly higher, more evolved compositions (6.5–7.5‰) including samples from: the Jack Hills (4.4–3.3 Ga), the Beartooth Mountains (4.0–2.9 Ga), Barberton (3.5–2.7 Ga), the Superior and Slave Provinces (3.0 to 2.7 Ga), and the Lewisian (2.7 Ga). No zircons from the Archean have been analyzed with magmatic δ¹⁸O above 7.5‰. The mildly evolved, higher Archean values (6.5–7.5‰) are interpreted to result from exchange of protoliths with surface waters at low temperature followed by melting or contamination to create mildly elevated magmas that host the zircons. During the Proterozoic, the range of δ¹⁸O(Zrc) and the highest values gradually increased in a secular change that documents maturation of the crust. After ∼1.5 Ga, high δ¹⁸O zircons (8 to >10‰) became common in many Proterozoic and Phanerozoic terranes reflecting δ¹⁸O(whole rock) values from 9 to over 12‰. The appearance of high δ¹⁸O magmas on Earth reflects nonuniformitarian changes in the composition of sediments, and rate and style of recycling of surface-derived material into magmas within the crust. Electronic Supplementary Material Supplementary material is available for this article at     

The origin of high δ<Superscript>18</Superscript>O zircons: marbles,megacrysts, and metamorphism

The oxygen isotope ratios (δ¹⁸O) of most igneous zircons range from 5 to 8‰, with 99% of published values from 1345 rocks below 10‰. Metamorphic zircons from quartzite, metapelite, metabasite, and eclogite record δ¹⁸O values from 5 to 17‰, with 99% below 15‰. However, zircons with anomalously high δ¹⁸O, up to 23‰, have been reported in detrital suites; source rocks for these unusual zircons have not been identified. We report data for zircons from Sri Lanka and Myanmar that constrain a metamorphic petrogenesis for anomalously high δ¹⁸O in zircon. A suite of 28 large detrital zircon megacrysts from Mogok (Myanmar) analyzed by laser fluorination yields δ¹⁸O from 9.4 to 25.5‰. The U–Pb standard, CZ3, a large detrital zircon megacryst from Sri Lanka, yields δ¹⁸O = 15.4 ± 0.1‰ (2 SE) by ion microprobe. A euhedral unzoned zircon in a thin section of Sri Lanka granulite facies calcite marble yields δ¹⁸O = 19.4‰ by ion microprobe and confirms a metamorphic petrogenesis of zircon in marble. Small oxygen isotope fractionations between zircon and most minerals require a high δ¹⁸O source for the high δ¹⁸O zircons. Predicted equilibrium values of Δ¹⁸O(calcite-zircon) = 2–3‰ from 800 to 600°C show that metamorphic zircon crystallizing in a high δ¹⁸O marble will have high δ¹⁸O. The high δ¹⁸O zircons (>15‰) from both Sri Lanka and Mogok overlap the values of primary marine carbonates, and marbles are known detrital gemstone sources in both localities. The high δ¹⁸O zircons are thus metamorphic; the 15–25‰ zircon values are consistent with a marble origin in a rock-dominated system (i.e., low fluid_(external)/rock); the lower δ¹⁸O zircon values (9–15‰) are consistent with an origin in an external fluid-dominated system, such as skarn derived from marble, although many non-metasomatized marbles also fall in this range of δ¹⁸O. High δ¹⁸O (>15‰) and the absence of zoning can thus be used as a tracer to identify a marble source for high δ¹⁸O detrital zircons; this recognition can aid provenance studies in complex metamorphic terranes where age determinations alone may not allow discrimination of coeval source rocks. Metamorphic zircon megacrysts have not been reported previously and appear to be associated with high-grade marble. Identification of high δ¹⁸O zircons can also aid geochronology studies that seek to date high-grade metamorphic events due to the ability to distinguish metamorphic from detrital zircons in marble.     

Formation and alteration of plagiogranites in an ultramafic-hosted detachment fault at the Mid-Atlantic Ridge (ODP Leg 209)

We examined small-scale shear zones in drillcore samples of abyssal peridotites from the Mid-Atlantic Ridge. These shear zones are associated with veins consisting of chlorite + actinolite/tremolite assemblages, with accessory phases zircon and apatite, and they are interpreted as altered plagiogranite melt impregnations, which originate from hydrous partial melting of gabbroic intrusion in an oceanic detachment fault. Ti-in-zircon thermometry yields temperatures around 820°C for the crystallization of the evolved melt. Reaction path modeling indicates that the alteration assemblage includes serpentine of the adjacent altered peridotites. Based on the model results, we propose that formation of chlorite occurred at higher temperatures than serpentinization, thus leading to strain localization around former plagiogranites during alteration. The detachment fault represents a major pathway for fluids through the oceanic crust, as evidenced by extremely low δ¹⁸O of altered plagiogranite veins (+3.0–4.2‰) and adjacent serpentinites (+ 2.6–3.7‰). The uniform oxygen isotope data indicate that fluid flow in the detachment fault system affected veins and adjacent host serpentinites likewise. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Fluid flow in marbles at Jervois, central Australia: oxygen isotope disequilibrium and zoning produced by decoupling of mineralogical and isotopic resetting

The Jervois region of the Arunta Inlier, central Australia, contains para- and orthogneisses that underwent low-pressure amphibolite facies metamorphism (P = 200–300 MPa, T = 520–600 °C). Marble layers cut by metre-wide quartz + garnet ± epidote veins comprise calcite, quartz, epidote, clinopyroxene, grandite garnet, and locally wollastonite. The marbles also contain locally discordant decimetre-thick garnet and epidote skarn layers. The mineral assemblages imply that the rocks were infiltrated by water-rich fluids (XCO₂ = 0.1–0.3) at ∼600 °C. The fluids were probably derived from the quartz-garnet vein systems that represent conduits for fluids exsolved from crystallizing pegmatites emplaced close to the metamorphic peak. At one locality, the marble has calcite (Cc) δ¹⁸O values of 9–18‰ and garnet (Gnt) δ¹⁸O values of 10–14‰. The δ¹⁸O(Gnt) values are only poorly correlated with δ¹⁸O(Cc), and the δ¹⁸O values of some garnet cores are higher than the rims. The isotopic disequilibrium indicates that garnet grew before the δ¹⁸O values of the rock were reset. The marbles contain  ≤15% garnet and, for water-rich fluids, garnet-forming reactions are predicted to propagate faster than O-isotopes are reset. The Sm-Nd and Pb-Pb ages of garnets imply that fluid flow occurred at 1750–1720 Ma. There are no significant age differences between garnet cores and rims, suggesting that fluid flow was relatively rapid. Texturally late epidote has δ¹⁸O values of 1.5–6.2‰ implying δ¹⁸O(H₂O) values of 2–7‰. Waters with such low-δ¹⁸O values are probably at least partly meteoric in origin, and the epidote may be recording the late influx of meteoric water into a cooling hydrothermal system. Received: 29 April 1996 / Accepted: 12 March 1997     

Oxygen and hydrogen isotope study of high-pressure metagabbros and metabasalts (Cyclades, Greece): implications for the subduction of oceanic crust

Oxygen and hydrogen stable isotope ratios of eclogite-facies metagabbros and metabasalts from the Cycladic archipelago (Greece) document the scale and timing of fluid–rock interaction in subducted oceanic crust. Close similarities are found between the isotopic compositions of the high-pressure rocks and their ocean-floor equivalents. High-pressure minerals in metagabbros have low δ¹⁸O values: garnet 2.6 to 5.9‰, glaucophane 4.3 to 7.1‰; omphacite 3.5 to 6.2‰. Precursor actinolite that was formed during the hydrothermal alteration of the oceanic crust by seawater analyses at 3.7 to 6.3‰. These compositions are in the range of the δ¹⁸O values of unaltered igneous oceanic crust and high-temperature hydrothermally altered oceanic crust. In contrast, high-pressure metabasalts are characterised by ¹⁸O-enriched isotopic compositions (garnet 9.2 to 11.5‰, glaucophane 10.6 to 12.5‰, omphacite 10.2 to 12.8‰), which are consistent with the precursor basalts having undergone low-temperature alteration by seawater. D/H ratios of glaucophane and actinolite are also consistent with alteration by seawater. Remarkably constant oxygen isotope fractionations, compatible with isotopic equilibrium, are observed among high-pressure minerals, with Δ_{glaucophane−garnet} = 1.37 ± 0.24‰ and Δ_{omphacite−garnet} = 0.72 ± 0.24‰. For the estimated metamorphic temperature of 500 °C, these fractionations yield coefficients in the equation Δ = A * 10⁶/T ² (in Kelvin) of A_{glaucophane−garnet} = 0.87 ± 0.15 and A_{omphacite−garnet} = 0.72 ± 0.24. A fractionation of Δ_{glaucophane–actinolite} = 0.94 ± 0.21‰ is measured in metagabbros, and indicates that isotopic equilibrium was established during the metamorphic reaction in which glaucophane formed at the expense of actinolite. The preservation of the isotopic compositions of gabbroic and basaltic oceanic crust and the equilibrium fractionations among minerals shows that high-pressure metamorphism occurred at low water/rock ratios. The isotopic equilibrium is only observed at hand-specimen scale, at an outcrop scale isotopic compositional differences occur among adjacent rocks. This heterogeneity reflects metre-scale compositional variations that developed during hydrothermal alteration by seawater and were subsequently inherited by the high-pressure metamorphic rocks. Received: 4 January 1999 / Accepted: 7 July 1999     

Deciphering the source and contamination history of peraluminous magmas using δ18O of accessory minerals: examples from garnet-bearing plutons of the Sierra Nevada batholith

Peraluminous granitoids provide critical insight as to the amount and kinds of supracrustal material recycled in the central Sierra Nevada batholith, California. Major element concentrations indicate Sierran peraluminous granitoids are high-SiO₂ (68.9–76.9) and slightly peraluminous (average molar Al₂O₃/(CaO + Na₂O + K₂O)=1.06). Both major and trace element trends mimic those of other high-silica Sierran plutons. Garnet (Grt) in the peraluminous plutons is almandine–spessartine-rich and of magmatic origin. Low grossular contents are consistent with shallow (<4 kbar) depths of garnet crystallization. Metasediments of the Kings Sequence commonly occur as wallrocks associated with the plutons, including biotite schists that are highly peraluminous (A/CNK=2.25) and have high whole rock (WR) δ¹⁸O values (9.6–21.8‰, average=14.5±2.9‰, n=26). Ultramafic wallrocks of the Kings–Kaweah ophiolite have lower average δ¹⁸O (7.1±1.3‰, n=9). The δ¹⁸O(WR) of the Kings Sequence is variable from west to east. Higher δ¹⁸O values occur in the west, where quartz in schists is derived from marine chert; values decrease eastward as the proportion of quartz from igneous and metamorphic sources increases. Peraluminous plutons have high δ¹⁸O(WR) values (9.5–13‰) consistent with supracrustal enrichment of their sources. However, relatively low initial ⁸⁷Sr/⁸⁶Sr values (0.705–0.708) indicate that the supracrustal component in the source of peraluminous magmas was dominantly altered ocean crust and/or greywacke. Also, plutons lack or have very low abundances (<1% of grains) of inherited zircon (Zrc) cores. Average δ¹⁸O(Zrc) is 7.9‰ in peraluminous plutons, a higher value than in coeval metaluminous plutons (6–7‰). Diorites associated with peraluminous plutons also have high δ¹⁸O(Zrc), 7.4–8.3‰, which is consistent with the diorites being derived from a similar source. Magmatic garnet has variable δ¹⁸O (6.6–10.5‰, avg.=7.9‰) due to complex contamination and crystallization histories, evidenced by multiple garnet populations in some rocks. Comparison of δ¹⁸O(Zrc) and δ¹⁸O(Grt) commonly reveals disequilibrium, which documents evolving magma composition. Minor (5–7%) contamination by high δ¹⁸O wallrocks occurred in the middle and upper crust in some cases, although low δ¹⁸O wallrock may have been a contaminant in one case. Overall, oxygen isotope analysis of minerals having slow oxygen diffusion and different times of crystallization (e.g., zircon and garnet), together with detailed textural analysis, can be used to monitor assimilation in peraluminous magmas. Moreover, oxygen isotope studies are a valuable way to identify magmatic versus xenocrystic minerals in igneous rocks. Electronic Supplementary Material Supplementary material is available for this article at