波流共同作用下的底部剪切力研究

介绍了波浪和水流、波浪和潮流共同作用下的底部剪切应力研究现状,对潮流模型和有波浪时的波浪-潮流模型进行了描述,给出了模型中参数的形式,提出了今后波浪和水流、波浪和潮流的研究方向.     

斜向波浪对半圆型防波堤作用的实验研究

通过正向与斜向波浪对半圆型防波堤(不开孔出水堤)的实验研究,给出了其水力特性及单位堤长所受的无因次水平波浪力、竖向波浪力和波浪浮托力随各主要影响因素的变化规律,特别指出了斜向波浪力可大于正向波浪力及水平波浪力中波谷作用大于波峰作用发生的条件。     

方向分布对三维聚焦波浪波面特性影响研究

波浪聚焦被认为是产生极限波浪的重要机理之一,近年来受到普遍重视。通过高阶谱方法,引入造波边界建立数值计算模型,模拟聚焦波浪在不同方向分布时的产生和聚焦过程,研究波浪的方向分布对聚焦波浪的波面、波峰最大值、聚焦点的偏移、波面参数及频谱的影响。研究结果表明波浪方向分布越窄,波浪的非线性影响越强、波面越陡,波峰值、聚焦点的偏移和波面特征参数都越大;同时方向分布对波浪聚焦前后的能量具有很大的影响。     

双边多单元造波机造波性能分析

由若干独立摇板组成的多单元造波机是实验室研究波浪及其与海洋工程结构物相互作用的重要设备。由于单元摇板宽度和波浪周期对斜向波浪模拟方向角的限制、斜向波浪模拟引起的杂波和三维短峰波浪模拟的有效实验区范围等,是影响多单元造波机波浪模拟质量的关键问题。通过对海洋深水池双边多单元造波机性能的分析,获得了波向角与规则波浪周期的关系,避免杂波产生的波浪周期范围和三维短峰波浪有效实验区的范围。分析结果对于海洋深水池高质量模拟波浪并为海洋工程结构物模型试验提供良好的波浪环境条件具有重要意义。     

波浪水质点漂流速度的研究现状

一、研究目的和现状波浪水质点的漂流速度U(亦称波浪传质速度),使波浪破波带的悬沙和底沙产生向岸和离岸横向运动,且当波浪进入水流区后,由于波浪水质点存在漂流速度,所以,除水流使波浪原始要素发生改变外,波浪也在不同程度上改变着流场,可见波浪水质     

极端波浪条件下深水导管架基础结构波浪总力试验研究

波浪力对海上风电深水导管架基础结构的稳定性和安全性至关重要。通过波浪物理模型试验对极端波浪条件下深水导管架基础结构的波浪总力进行了试验研究,试验水深包括50 m和70 m两种,在1 000 a一遇波浪条件下,分别分析了深水导管架结构所受的波浪总水平力和垂直力。研究结果表明：相同重现期极端波浪作用下,70 m水深情况下的导管架结构波浪总水平力小于50 m水深的结果,但是70 m水深的导管架结构波浪总水平力弯矩大于50 m水深的结果;相同水深、水位和波浪条件下,导管架结构受到的波浪总垂直力明显小于波浪总水平力;在相同重现期极端波浪作用下,低水位情况时70 m水深的导管架结构波浪总垂直力与50 m水深的结果差别不大,但是在高水位时,由于在70 m水深的极端波浪条件下波峰可冲击作用到上部平台底面,70 m水深的导管架结构波浪总垂直力明显大于50 m水深的结果。     

结合椭圆型缓坡方程模拟近岸波流场

波浪向近岸传播的过程中,由波浪破碎效应所产生的近岸波流场是近岸海域关键的水动力学因素之一.结合近岸波浪场的椭圆型缓坡方程和近岸波流场数学模型对近岸波浪场及由斜向入射波浪破碎后所形成的近岸波流场进行了数值模拟.计算中考虑到波浪向近岸传播中由于波浪的折射、绕射、反射等效应使局部复杂区域波向不易确定,采用结合椭圆型缓坡方程所给出的波浪辐射应力公式来计算波浪产生的辐射应力,在此基础上耦合椭圆型缓坡方程和近岸波流场数学模型对近岸波流场进行数值模拟,从而使模型综合考虑了波浪的折射、绕射、反射等效应且避免了对波向角的直接求解,可以应用于相对较复杂区域的近岸波流场模拟.     

斜坡堤典型胸墙波浪力的影响因素

为探求斜坡堤典型胸墙迎浪面所受波浪力大小的影响因素,设计前仰式、深弧式、后仰式和直立式4种结构型式胸墙进行相关的物理模型试验。通过在典型胸墙迎浪面间隔布置压力测点,获取所受波浪压力,并将其进行积分求和,得到胸墙所受波浪力,进而讨论相对波高、相对波长、斜坡坡度和胸墙结构型式对波浪力的影响。结果表明,相对波高与相对波长对胸墙所受波浪力影响显著;波浪力随着相对波高的增大而增大,随着相对波长的增大呈现先增大、后减小、再增大的变化趋势;波浪力随着斜坡坡度的增大而减小。斜坡堤弧形胸墙所受波浪力明显大于直立式胸墙所受波浪力;在斜坡堤弧形胸墙中,前仰式胸墙受力较其余两种型式胸墙受力小。研究结果将加深波浪对斜坡堤胸墙作用力的理解,为后续工程设计提供理论指导。     

球形波浪浮标结构参数对其升沉运动性能的影响

对球形波浪浮标进行了静力学分析,并结合球形波浪浮标吃水线的一般设计要求得出了球形波浪浮标的平均密度与海水密度的关系式。利用球形波浪浮标在受到波浪激励时的运动响应方程并结合球形波浪浮标的结构参数特点,得出了球形波浪浮标在波浪激励下的升沉运动振幅与激励波浪振幅相一致的理论条件和结构参数。以国家海洋技术中心最新研发的直径480 mm球形波浪测量浮标为研究对象,结合海洋表面波分类特征,研究了该球形浮标体在常规波浪激励下的升沉运动响应的相关性能,并给出了在测量不同周期的波浪时,该球形浮标体升沉运动的理论响应振幅系数。通过以上分析得出了直径480 mm球形波浪测量浮标在测量周期为1 s以上的波浪时具有非常优越的随波浪升沉运动的性能。文章的相关分析为球形波浪浮标的进一步研究提供了理论基础。     

YZ-l型遥控遥测波浪仪

可以连续进行波浪测量的仪器被通称为“自记波浪仪”。按其测量讯号的传输方式划分,可分为有线传输型自记波浪仪和无线传输型自记波浪仪两类。 使用无线传输型自记波浪仪进行海上波浪测量,具有便于取得大风天气下的波浪资料、可长时间(几天或几十天)在离岸较远的海上连续进行波浪测量和节省调查费用等优点。笔     

波浪冲击过程流场变化特性试验研究

利用瞬态全场测量技术———粒子图像测速(PIV)技术,研究了波浪对透空式建筑物上部结构冲击过程的流场变化特性。通过对采集到的CCD图像互相关分析,直观地显示了波浪冲击作用发生时结构物底面的流场状态,得到瞬间全场流体水质点速度矢量,并且应用概率分析法研究了冲击压力峰值与波浪水质点运动速度之间的关系。     

Efficient Generation of Freak Waves in Laboratory

In the present study,Kriebel's method is improved to generate freak waves in laboratory.The improved method superposes a random wave train with two transient wave trains to simulate freak wave events in a wave tank.The freak waves are more nonlinear than what generated with Kriebel's method of the same energy.It can also generate freak waves to satisfy all the qualifications of the adopted definition with less energy than Kriebel's and can hardly influence the significant wave height.     

孤立波与带窄缝双箱相互作用模拟研究

针对孤立波与带窄缝双箱的作用问题,应用时域高阶边界元方法建立了二维数值水槽。其中,自由水面满足完全非线性运动学和动力学边界条件,对瞬时自由表面流体质点采用混合欧拉-拉格朗日法追踪,采用四阶龙格库塔法对下一时刻的自由水面的速度势和波面升高进行更新。采用加速度势法求解物体湿表面的瞬时波浪力。采用推板方法生成孤立波。通过模拟孤立波在直墙上的爬高以及施加在直墙上的波浪力,并与已发表的实验和数值结果对比,验证本数值模型的准确性。通过数值模拟计算研究了窄缝宽度、方箱尺寸对波浪在箱体迎浪侧爬高,窄缝内波面升高,箱体背浪侧透射波高及箱体受波浪荷载的影响。同时研究了有一定时间间隔的双孤立波与带窄缝双箱系统作用问题。     

台阶型海脊俘获波的实验研究

基于物理模型实验研究瞬态冲击波在台阶地形上传播过程,揭示由于反射而在海脊上出现的波浪俘获现象。结果表明:在瞬态波产生区域附近,海脊上所测到的先导波即为最大波,其由泄漏至海脊外的深水波绕射至海脊所致。随着传播距离的增加,由于频散效应的影响,先导波逐渐减小,沿台阶近似直线传播的海脊俘获波和在台阶上曲折传播的海脊俘获波逐渐显现。在距离波浪产生较远区域所测的最大波晚于先导波出现,且这些由俘获波所叠加而成的最大波随着传播距离的增加而呈现出更加复杂的波面过程。     

Numerical study on three-dimensional waves produced by a bottom jet

The eruption of an underwater volcano can initiate the disturbances of the sea surface and subsequently generate a group of outward-propagating tsunamis. The theme of this study is to introduce a three-dimensional (3D) fully nonlinear wave model for the simulation of wave motions induced by a bottom jet. A boundary-fitted coordinate system is utilized to conveniently adjust grids according to the transient moving free surface. The governing Laplace equation of the velocity potential is solved by an implicit finite-difference scheme while a mixed explicit/implicit iteration procedure is applied to solve the free-surface boundary conditions. In addition, a set of generalized Boussinesq equations are solved for comparison with the fully nonlinear model. Good agreements in comparisons with the existing numerical and analytical solutions are achieved for cases investigated. Waves induced by three types of bottom jets: namely (1) sudden eruption, (2) initial transient, and (3) periodic transient are discussed in this paper. For the case of sudden erupted jet, a system of 3D outgoing waves as the cylindrical wave pattern are presented and discussed. For the initial transient types, it shows the transition in the incipient stage has a great influence on the initial rising of the water surface and the induced leading waves. Furthermore, an interesting up-down phenomenon in the center of disturbed free surface due to the type of periodic jet is revealed.     

Development and validation of harmonic wave group single-run procedure for RAO with comparison to regular wave and transient wave group procedures using URANS

A harmonic wave group single run seakeeping procedure is developed, validated and compared with regular wave and transient wave group procedures, using an unsteady Reynolds averaged Navier–Stokes solver, although all procedures can be also implemented using experiments or potential flow. Incoming waves are generated by linear superposition of potential solution for a number of component waves. The regular wave procedure requires multiple runs, whereas single run procedures obtain the response amplitude operators (RAO) for a range of frequencies at a fixed speed, assuming linear ship response. The transient wave group procedure provides continuous RAO curves, while the harmonic wave group procedure obtains discrete transfer functions without focusing. Results are presented for heave and pitch response amplitudes and phases for the DTMB model 5512 in head waves. Verification and validation studies are performed for the transient wave group procedure. Validation is achieved at the average interval of 9.54 (%D). Comparisons of the procedures show that the harmonic wave group procedure is the most efficient, saving 75.8% on the computational cost compared with the regular wave procedure. Error values from all procedures are similar at 4 (%D). Harmonic wave group results are validated for a wide range of the Froude numbers, with satisfactory results.     

Displacements induced by breaking waves on axially loaded cylindrical shells

Forced vibrations of the walls of a vertical cylindrical shell under the impact of a breaking wave are studied theoretically. The wave action is modelled as a pressure distribution which varies in time and space. A linear dynamic analysis of the transient response is carried out by means of the modal superposition technique, in which the static stresses are considered. The results show that in thin shells, the transient displacements could be of the order of the thickness of the shell. It is suggested that these large displacements could play an important role in eroding the buckling capacity of the structural component. The problem of limiting the dynamic displacements is discussed by interaction diagrams for static axial load-dynamic lateral pressure, and by examination of the confluence of shell and wave parameters for which the transient displacements do not exceed a given value.     

用ＯｐｅｎＦＯＡＭ 实现数值水池造波和消波

基于OpenFOAM求解器interDyMFoam,开发实现数值水池造波(包括推板和摇板造波)和阻尼消波。所编写的造波边界条件,可依据实验造波理论将各种造波模式植入其中,从而实现各种波的数值造波。首先进行了线性波的数值造波实验,通过结合阻尼消波段的应用,造波水池可提供稳定的线性波。还进行了瞬时极限波和有限振幅的数值造波实验,与实验数据或同类数值结果吻合很好,进一步验证了的数值造波和消波方式的可靠性。     

Linear and nonlinear interactions of surface waves with bodies by a three-dimensional Rankine panel method

Linear and second-order surface wave interactions with floating and bottom-mounted bodies of realistic geometry are simulated in the time domain by a three-dimensional Rankine panel method. The fundamental stability analysis governing the propagation of transient wave disturbances on a panel mesh distributed on the free surface is carried out from first principles. The radiation condition is enforced by a dissipative beach selected to coincide with an outer annulus of panels. The fundamental physics governing the wave energy absorption is presented and the beach attributes are selected and validated for the linear and second-order problems. Computations are presented of the linear and sum-frequency second-order forces on a single and multiple truncated circular cylinders, and very good agreement is found with benchmark computations. The accuracy and efficiency of this method render it a promising candidate for the study of complex nonlinear wave induced phenomena upon offshore platforms, like springing and ringing.     

A time-dependent numerical model of the mild-slope equation

On the basis of the previous studies, the simplest hyperbolic mild-slope equation has been gained and the linear time-dependent numerical model for the water wave propagation has been established combined with different boundary conditions. Through computing the effective surface displacement and transforming into the real transient wave motion, related wave factors will be calculated. Compared with Lin’s model, analysis shows that calculation stability of the present model is enhanced efficiently, because the truncation errors of this model are only contributed by the dissipation terms, but those of Lin’s model are induced by the convection terms, dissipation terms and source terms. The tests show that the present model succeeds the merit in Lin’s model and the computational program is simpler, the computational time is shorter, and the computational stability is enhanced efficiently. The present model has the capability of simulating transient wave motion by correctly predicting at the speed of wave propagation, which is important for the real-time forecast of the arrival time of surface waves generated in the deep sea. The model is validated against analytical solution for wave diffraction and experimental data for combined wave refraction and diffraction over a submerged elliptic shoal on a slope. Good agreements are obtained. The model can be applied to the theory research an d engineering applications about the wave propagation in a biggish area.